Thermal Imaging Microscopy Research Articles

Analysis of photothermal heating of microhole bowtie antennas on gold metal films

AbstractIn this work, we present a numerical and experimental study of the photothermal heating of microholes array (MHA) bowtie antennas on gold metal films. The article first shows how MHAs in gold metal films can absorb more heat depending on the geometry or placement of the MHA in each gold metal films. We show numerically and experimentally that the photothermal heating exhibits a maximum when the MHAs are patterned in a bowtie‐like geometry. Numerical studies were carried out by using COMSOL multiphysics and experimental results were obtained using thermal imaging microscopy for several different MHAs geometries, respectively. Our results showed a good agreement between experimental data and the numerical simulations, validating that MHAs bowtie antennas on gold metal films heat significantly more and make them ideal for use in photothermal applications.

Dynamics of Frost Propagation on Breath Figures.

We investigate the process of condensation frosting on flat surfaces using thermal imaging microscopy. This method is particularly well-suited to characterize the frosting of polydisperse assemblies of dew droplets, also called breath figures, that transform into ice droplets by the propagation of frost fronts. The front propagation speed is found to be a nonmonotonous function of the characteristic droplet size of the breath figure. In our experimental conditions, the propagation speed is maximum around 70 μm s-1 for a characteristic droplet radius of around 300 μm. We mainly show that the frost propagation speed is governed by the competition between two characteristic time scales. The first one is the freezing time of individual droplets, and the other one is the formation time of interdroplet ice bridges that grow from frozen to liquid droplets. In addition, the experiments reveal that the mean ice bridge speed is constant regardless of the characteristic radius of the liquid droplets in the breath figure. A theoretical mean-field analysis without any adjustable parameters recovers all of the features of the front propagation observed in experiments.

Probing mid-infrared surface interface states based on thermal emission.

Probing mid-infrared surface wave radiation remains a big challenge for a long time. The lack of convenient and quick mid-infrared surface wave radiation probing methods limits the development of the integrated mid-infrared materials and devices. In this work, we propose a scheme to construct and probe the mid-infrared surface wave radiation of interface state in the waveguide through thermal emission. A superlattice composed of alternately placed periodic meta-crystals is designed to construct an array of interfaces to realize the interface states through the transverse electrical waveguide modes with a tolerance in structural parameters. By heating the structure, we employ angular resolved thermal emission spectroscopy to directly and quickly verify the dispersion of mid-infrared interface states, which have specific frequencies, angles, and polarizations. Moreover, we establish a thermal imaging microscopy to probe the local waveguide interface state directly for the first time. This proposed infrared probing method based on thermal emission can be generalized to probe the mid-infrared surface wave in other systems, such as surface plasmon waves in graphene or surface phonon waves in two-dimensional materials in the mid-infrared range.

New development of nanoscale spectroscopy using scanning probe microscope

Nanoscale spectroscopy and imaging, a hybrid technique that combines a scanning probe microscope (SPM) with spectroscopy, can provide nanoscale topographical, spectral, and chemical information of a sample. In recent years, developments in nanofabrication technology have dramatically advanced the field of nanospectroscopy for applications in various fields including nanoscale materials, electronics, catalysis, and biological systems. However, challenges in nanofocusing of light for excitation and extracting weak signals of individual molecules from the background signal persist in conventional nanoscale spectroscopy including tip-enhanced Raman spectroscopy, scanning near-field microscopy (SNOM/NSOM), and photoluminescence spectroscopy. This article reviews new approaches to design plasmonic SPM probes that improve important aspects of nanospectroscopy such as nanofocusing, far-to-near-field-coupling efficiency, background suppression, and ease of fabrication. The authors survey a diverse range of novel schemes to excite propagating surface plasmon polaritons on the probe surface to attain highly enhanced nanofocused light at the apex for nanoscale spectroscopies. These schemes include grating coupler configurations on the plasmonic SPM probes, aperture and apertureless plasmonic SNOM probes, nanostructured resonators coupled with a high-quality-factor photonic cavity, interfacing of the optical fiber with plasmonic nanowires, and nanoparticle-coupled plasmonic nanowires. These innovative probes merge the field of fiber optics, plasmonics, quantum optics, and nanomaterials. The authors provide a perspective on new approaches that combine the advantages of these probes and have the potential for significant advancement in nanoscale imaging and other types of nanoscale spectroscopies including scanning quantum spin spectroscopy and scanning thermal imaging microscopy.

Monitoring photopolymerization reactions through thermal imaging: A unique tool for the real‐time follow‐up of thick samples, 3D printing, and composites

ABSTRACTThe ever increasing applications of photopolymers from historical thin (<50 µm) coatings to very deep samples (>1 cm) require the development of robust 4D monitoring strategies able to assess photopolymerization efficiencies (first dimension) as a function of time (second dimension) and position (third and fourth dimensions). Therefore, here, we demonstrated that thermal imaging is a valuable photopolymerization monitoring device showing: (a) very high response times (<1 s); (b) high repeatability of the measurement; (c) strong adaptability of the setup to various conditions (e.g., onto irregular surfaces or inside a real time Fourier transformed infrared spectrometer (RT‐FTIR)); (d) extremely deep photopolymerization follow‐ups (and subsequent rationalization) with good resolution in time and in space (real‐time thermal imaging microscopy experiments); (e) adaptability to applied materials. This monitoring strategy was found particularly robust when taking into account all the heat generating phenomena (i.e., direct heating from the lamp vs. temperature raised due to monomer conversion). As a result, we propose thermal imaging as the next reference monitoring system for the new ranges of thick and/or filled samples (e.g., 3D objects, composites) and/or applied photopolymerizations (e.g., 3D printing) more and more present in the literature. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 889–899

Hot spots in energetic materials generated by infrared and ultrasound, detected by thermal imaging microscopy

We have observed and characterized hot spot formation and hot-spot ignition of energetic materials (EM), where hot spots were created by ultrasonic or long-wavelength infrared (LWIR) exposure, and were detected by high-speed thermal microscopy. The microscope had 15-20 μm spatial resolution and 8.3 ms temporal resolution. LWIR was generated by a CO2 laser (tunable near 10.6 μm or 28.3 THz) and ultrasound by a 20 kHz acoustic horn. Both methods of energy input created spatially homogeneous energy fields, allowing hot spots to develop spontaneously due to the microstructure of the sample materials. We observed formation of hot spots which grew and caused the EM to ignite. The EM studied here consisted of composite solids with 1,3,5-trinitroperhydro-1,3,5-triazine crystals and polymer binders. EM simulants based on sucrose crystals in binders were also examined. The mechanisms of hot spot generation were different with LWIR and ultrasound. With LWIR, hot spots were most efficiently generated within the EM crystals at LWIR wavelengths having longer absorption depths of ∼25 μm, suggesting that hot spot generation mechanisms involved localized absorbing defects within the crystals, LWIR focusing in the crystals or LWIR interference in the crystals. With ultrasound, hot spots were primarily generated in regions of the polymer binder immediately adjacent to crystal surfaces, rather than inside the EM crystals.

A study of thermal processes in high-power InGaN/GaN flip-chip LEDs by IR thermal imaging microscopy

Results of an experimental study of temperature fields generated in high-power AlGaInN heterostructure flip-chip light-emitting diodes (LEDs) via their self-heating at high working currents are presented. The method of IR thermal imaging microscopy employed in the study enables a direct measurement of the temperature distribution over the p-n junction area with a high resolution of ∼3 μm at an absolute measurement error of ∼2 K. It is shown that large temperature gradients may arise in high-power LEDs at high excitation levels as a result of current crowding. This effect should be taken into account when designing lightemitting chips and estimating the admissible operation modes. The method of IR thermal imaging microscopy can also reveal microscopic defects giving rise to current leakage channels and impairing device reliability.