Textured Films Research Articles

Interactions of sphingomyelin with biologically crucial side chain-hydroxylated cholesterol derivatives.

Oxysterols are interesting molecules due to their dual nature, reflecting beneficial and harmful effects on the body. An issue that still needs to be solved is how slight modification of their structure owing to the location of the additional polar group in the molecules affects their biological activity. With this in mind, we selected three side chain-hydroxylated oxysterols namely: 20(S)-hydroxycholesterol (20(S)-OH), 24(S)-hydroxycholesterol (24(S)-OH), and 27-hydroxycholesterol (27-OH), and examined their behavior in mixtures with the bioactive sphingolipid - sphingomyelin (SM). Our research was based on the Langmuir monolayer technique supplemented with molecular dynamics (MD) and microscopic observation of the films texture (Brewster angle microscopy, BAM, and atomic force microscopy, AFM). Additionally, since 20(S)-hydroxycholesterol has not been studied so far, we thoroughly characterized this oxysterol in one-component monolayers. Our studies showed differences in the interactions of the studied oxysterols and sphingomyelin. Namely, it was found that 20(S)-OH binds to SM, unlike 24(S)-OH and 27-OH, which both weakly interact with SM. This distinct behavior was interpreted within the molecular dynamics as being due to weak intermolecular interactions between 20(S)-OH molecules, which allowed easy incorporation of SM into the 20(S)-OH monolayer. In contrast, the strong oxysterol-oxysterol interactions occurring in monolayers with 24(S)-OH or 27-OH make this process more difficult. This may be important in the process of bone formation/resorption. Other aspects derived from our study are: (i) the tendency of oxysterols to incorporate into lipid rafts (leading to their modification in structure and function), as well as (ii) the formation of multilayer structures, in which oxysterols are arranged in the characteristic forms of "strings of beads", which may facilitate their transport across the membrane.

Bound States and Scattering of Magnons on a Superconducting Vortex in Ferromagnet-superconductor Heterostructures

We study the magnon spectrum in a thin ferromagnetic-superconductor heterostructure in the presence of a single superconducting vortex. We employ the Bogolubov–de Gennes Hamiltonian which describes the magnons in the presence of the stray magnetic field and the non-uniform magnetic texture induced by the vortex. We find that the vortex localizes magnon states approximately in the same way as a charge center produces electron bound states due to screened Coulomb interaction in the two-dimensional electron gas. The number of these localized states is substantially determined by the material parameters of the ferromagnetic film only. We solve the scattering problem for an incident plane spin wave and compute the total and transport cross sections. We demonstrate that the vortex-induced non-uniform magnetic texture in chiral ferromagnetic film produces a skew scattering of magnons. We explore the peculiarities of the quantum scattering problem that correspond to orbiting in the classical limit.

Formulation and evaluation of herbal essential oil based nail lacquer for management of onychomycosis

IntroductionOnychomycosis (Paronychia) is a common fungal nail infection, characterised by thickened, discoloured and brittle nails often accompanied by pain and discomfort. It is one of the most prevalent fungal nail infections with the global incidence of >20 % affected commonly by Candida albicans and Candida parapsilosis. The market today is flooded with various antifungal therapies (Azoles, Imidazoles, Allylamines, etc.) but their clinical applicability is limited due to associated side effects. The study is an attempt to formulate essential oil-based nail lacquer against Candidal Onychomycosis. Material and MethodSelection of essential oils and preparation of their blends (EOB) was made on basis of their antifungal activity (minimum inhibitory concentration; MIC and zone of inhibition; ZOI) and physiological effect they exhibit on varied pathological parameters of onychomycosis. Simultaneously, varied batches of nail lacquer (N1-N5) were prepared by varying the concentrations of polymer and film forming agent and were evaluated for their formulatory characteristics (drying time, incidence of white patches, film texture, etc.). Optimal nail lacquer batch was loaded with screened EOB and was evaluated for various characteristics and antifungal activity. ResultThe formulation F4 was found to form a smooth, transparent film over the nail with absence of any tackiness or white patches. Moreover, F4 formulation exhibited minimum MIC among varied batches and higher ZOI (4.3 cm) as compared to marketed preparation (3.5 cm), indicating better antifungal activity. ConclusionEssential oils, as an active agent, could prove to be a natural, safer, and more effective alternative to the conventionally available topical preparations for the management of fungal infections. The development of this herbal mixture opens up new possibilities for treating onychomycosis, necessitating additional research and clinical studies to establish its clinical safety, efficacy, and viability.

Optimizing Surface Texture Through Ion Induction for High Areal Capacitance and Enhanced Stability in MXene Electrodes

AbstractTo make supercapacitors a viable commercial product, it is necessary to increase the mass loading (ML) of the electrodes. However, current research on high ML MXene electrodes mainly focuses on internal structure optimization, often neglecting the importance of surface texture in the electrodes, which plays a crucial role in mediating interactions between the internal structure and the electrolyte. This study reports on a simple ion‐intercalation process that can reduce charge transfer resistance and improve cycling stability. Through the integration of 3D visualization models and wide‐angle X‐ray scattering techniques, a comprehensive investigation of the electrode's surface structure and MXene flake arrangement is conducted. The results showed that pre‐oriented aggregates induced by ion‐intercalation create a sophisticated surface structure with rich hills and valleys, promoting electrolyte permeation and ion exchange. This work highlights the significance of surface texture in films and electrodes, guiding the design of high‐performance materials.

Structural and morphological properties of CeO2 films deposited by radio frequency magnetron sputtering for back-end-of-line integration

Cerium oxides have potential applications ranging from low-temperature gas sensing to photodetection. A back-end-of-line integration of the material into complementary metal-oxide-semiconductor device fabrication processes has many advantages but places limits on material deposition, most notably the thermal budget for deposition and annealing. Here, we investigate thin cerium oxide films deposited by radio frequency (RF) magnetron sputtering at substrate temperatures of 300°C and RF magnetron powers between 30 W and 70 W without any post-deposition annealing steps. Our investigation of the structural and morphological properties reveals a columnar texture of the thin films, and we find that the material is composed predominantly of CeO2 (111), with a large degree of crystallinity. We discuss implications for resistive gas sensing applications.

High Piezoelectric Performance of KNN-Based Ceramics over a Broad Temperature Range through Crystal Orientation and Multilayer Engineering.

Uninterrupted breakthroughs in the room temperature piezoelectric properties of KNN-based piezoceramics have been witnessed over the past two decades; however, poor temperature stability presents a major challenge for KNN-based piezoelectric ceramics in their effort to replace their lead-based counterparts. Herein, to enhance temperature stability in KNN-based ceramics while preserving the high piezoelectric response, multilayer composite ceramics were fabricated using textured thick films with distinct polymorphic phase transition temperatures. The results demonstrated that the composite ceramics exhibited both outstanding piezoelectric performance (d33~467 ± 16 pC/N; S~0.17% at 40 kV/cm) and excellent temperature stability with d33 and strain variations of 9.1% and 2.9%, respectively, over a broad temperature range of 25-180 °C. This superior piezoelectric temperature stability is attributed to the inter-inhibitive piezoelectric fluctuations between the component layers, the diffused phase transition, and the stable phase structure with a rising temperature, as well as the permanent contribution of crystal orientation to piezoelectric performance over the studied temperature range. This novel strategy, which addresses the piezoelectric and strain temperature sensitivity while maintaining high performance, is well-positioned to advance the commercial application of KNN-based lead-free piezoelectric ceramics.

Crystalline phase control of ferroelectric HfO2 thin film via heterogeneous co-doping

Our study investigates heterogeneous co-doped HfO2 thin films integrated into metal-ferroelectric-metal stacks, achieved by incorporating multiple layers doped with various species during the atomic layer deposition process. This approach creates an artificial crystallization temperature gradient across the HfO2 film, influencing the preferred nucleation sites of HfO2 during rapid thermal processing. Our findings demonstrate that the phase composition of the annealed HfO2 film is primarily determined by heterogeneous or homogeneous crystallization processes. In cases of heterogeneous crystallization, where crystallization initiates from nuclei formed at electrode/HfO2 interfaces, grains predominantly crystallize in the orthorhombic phase. Conversely, grains are more likely to crystallize in the monoclinic phase if they originate from nuclei formed at the center of the HfO2 film. Additionally, we observe correlations between the texture of the HfO2 film and the texture of the electrodes.

Deposition of highly crystalline AlScN thin films using synchronized high-power impulse magnetron sputtering: From combinatorial screening to piezoelectric devices

With the integration of 5G in day-to-day devices and the foreseeable 6G revolution, demand for advanced radio frequency (RF) microelectromechanical systems (MEMS) is growing. Aluminum scandium nitride (AlScN) has emerged as the material of choice for many of those applications due to its superior piezoelectric and electromechanical properties compared to aluminum nitride (AlN). However, synthesizing high-quality, textured AlScN thin films is challenging. Alloying of Sc in AlN induces structural frustration leading to strain, defects, disoriented grains, and disrupted crystal symmetry during growth. Higher deposition temperatures, while improving crystalline quality, risk undesirable phase precipitation and limit industrial sustainability. In addition, future MEMS technologies also demand conformal and textured coatings over diverse topographies. Addressing these challenges collectively requires new and innovative synthesis approaches. In this study, we investigate the feasibility of ionized physical vapor deposition to deposit highly oriented AlScN films with minimal defects at lower temperatures. To this end, we employ combinations of different deposition approaches, such as metal-ion synchronized (MIS) high-power impulse magnetron sputtering (HiPIMS). Leveraging the high ionization rates of HiPIMS and optimally timed substrate bias potentials, we selectively bombard the growing film with Al and/or Sc ions to enhance the adatom mobility at low temperatures while simultaneously providing the ability to tune stress and coat complex structures conformally. The nonequilibrium solubility of Sc in wurtzite AlN under different conditions is investigated using a combinatorial deposition approach. Promising candidates with ∼20% Sc composition are isolated and characterized for crystallinity and residual stress. Disoriented grains, a significant issue in growing AlScN films, are observed through atomic force microscopy and found to be completely removed by substrate rotation and application of substrate biasing. The measured piezoelectric response of the films with approximately 20% Sc concentration ranges from 6.3 to 8.8 pm/V, in line with density functional theory predictions and experimentally reported values for films deposited in a production tool with coplanar geometry. At the same time, MIS-HiPIMS-deposited films offer unique properties and flexibility to tune their stress state and structural properties, thus presenting exciting opportunities for the fabrication of advanced RF filters and next-generation MEMS devices. Published by the American Physical Society 2024

Effect of ethylene oxide and gamma sterilization on surface texture of films and electrospun poly(ε-caprolactone-co-p-dioxanone) (PCLDX) scaffolds

In the field of tissue engineering, synthetic and degradable polyesters like poly(ε-caprolactone) (PCL) and poly(ε-caprolactone-co-p-dioxanone) (PCLDX) are widely used as scaffolds. Our previous research revealed that thermal storage conditions could alter the surface texture of PCL and PCLDX scaffolds, which might influence cell-scaffold interactions in tissue engineering applications. These findings highlighted the importance of multi-scale characterization techniques to identify the scales most sensitive to external changes and the need for personalized surface texture analysis. Sterilization techniques, such as ethylene oxide and gamma radiation, are essential for ensuring the sterility of polymeric medical devices. However, these processes can significantly impact the bulk polymer properties and/or surface texture of the scaffolds, potentially affecting their biocompatibility, safety, and overall performance. Therefore, the influence of sterilization processes on the surface texture of PCLDX films and electrospun nanofibers and to correlate these findings with the thermal and physical properties of the polymer are essential and have been assessed. Our results demonstrated that ethylene oxide maintained the structural integrity and surface texture of PCLDX scaffolds, while gamma irradiation caused a significant reduction in molar mass and increased the number of hills (Shn) and dales (Sdn) on PCLDX samples. Despite these changes, both sterilization methods showed minimal effects on the thermal properties, such as melting temperature and degree of crystallinity, and surface wettability of the scaffolds. This comprehensive surface texture analysis highlights the importance of evaluating feature parameters such as Shn and Sdn for optimizing the performance and biocompatibility of polymeric scaffolds in tissue engineering.

Selecting a target for obtaining films of higher manganese silicide using magnetron sputtering

A film of manganese silicides on mica was obtained using a magnetron sputter from three types of targets. Microstructure and elemental composition of targets and films studied by scanning electron microscopy and electron reflection diffraction methods. The phase composition and texture of films by thickness (cross sections) were controlled by scanning and transmission electron microscopy. It has been shown that when depositing films from a poly- and single-crystalline target of higher manganese silicide, in contrast to a target of sintered Mn and Si powders, after successive annealing at a temperature of 800 K and a temperature of 10–3 Pa for 1 hour, polycrystalline films of higher silicide can be obtained. manganese composition Mn4Si7.

Unconventional magnetoresistance and resistivity scaling in amorphous CoSi thin films

The resistivity scaling of Cu electrical interconnects represents a critical challenge in Si CMOS technology. As interconnect dimensions reach below 10 nm, Cu resistivity increases significantly due to surface scattering. Topological materials have been considered for application in ultra-scaled interconnects (below 5 nm), due to their topologically protected surface states that have reduced electron scattering. Recent theoretical work on the topological chiral semimetal CoSi suggests that this material could offer lower resistivity than Cu at dimensions smaller than 10 nm. Here we investigate the scaling trend of textured and amorphous CoSi thin films, deposited by molecular beam epitaxy in a thickness range between 2 and 82.5 nm. Contrary to predictions of standard resistivity models, we report here a reduction in resistivity for thin amorphous CoSi films, which is instead consistent with surface-dominated transport. Moreover, magnetotransport measurements reveal significant enhancement of the magnetoresistance in scaled films, highlighting the complex transport mechanisms present in these highly disordered films at thicknesses of a few nanometers.

Investigation of the impact of environmental conditions on the mechanical properties of thin-film copper wafers

Thin-film copper offers excellent film texture for multilevel interconnections in integrated circuit fabrication due to its superior resistance to electromigration and high electrical conductivity. To perform a chemical mechanical planarization process during semiconductor fabrication of copper, it is necessary to have a thorough understanding of the nanomechanical properties of thin-film copper. In this study, thin-film copper and reacted passivation layers on silicon substrate wafers are investigated for their nanomechanical properties under various environmental conditions. The results of this study indicate that thin-film copper passivation layers have different properties in deionized (DI) water and polishing slurry environments compared to thin-film copper exposed to ambient air. Interestingly, variations in temperature within wet environments do not significantly affect the properties of thin-film copper wafers; but changes in properties are largely driven by chemical processes. The insights gained from this study emphasize the significance of considering both the passivation layers and wet environments in semiconductor fabrication processes, which contributes to the advancement of copper-based interconnect materials and optimization of the chemical mechanical planarization process in semiconductor manufacturing.

Controlled growth of YBCO film with tungsten oxide buffered substrate

This study explores the influence of tungsten oxide (WO3-x) nanostructures, decorated on LaAlO3 (LAO) single crystal substrate, on the fabrication and superconducting performance of YBa2Cu3Oy (YBCO) films. The WO3-x in square-dot and nanowire forms, significantly enhance the biaxial texture of YBCO films, resulting in high critical current density Jc (square-dot, 3.05 MA/cm2 @ 77 K, nanowire, 2.1 MA/cm2 @ 77 K). However, the presence of WO3-x nanodots leads to a random nucleation of YBCO grains along the a/b-axis, driving a porous surface and broadening the full width at half maximum (FWHM) in both phi and omega scans. This poor texture deteriorates the film’s Jc to 0.71 MA/cm2 @ 77 K. Therefore, optimizing the WO3-x interface is crucial for enhancing the epitaxial growth and critical current density of YBCO film. This study provides an effective approach to optimize the superconducting performance of YBCO film by tailoring nanostructure interface.

Advanced Light Management for Encapsulated Silicon Solar Cells: An Antireflective Textured Film with a Down-Shifting Lead-free Perovskite Cs2AgxNa1-xBiyIn1-yCl6 Phosphor.

Light management (LM) is the key to the encapsulation of high-performance silicon (Si) photovoltaic devices (PVs). In this work, simulation analyses provide meaningful insights into optical losses and guide the improvement of the PV performance of the encapsulated silicon solar cells (Encap-Si SCs). An antireflective layer, textured polydimethylsiloxane (PDMS), is designed to reduce reflection losses, especially at a lower illumination intensity, thereby achieving an improvement of 10.89% in the short-current density (JSC) and hence 12.67% in the power conversion efficiency (PCE) when illuminated at an incident angle of 60°. Subsequently, a luminescence down-shifting material, lead-free Cs2AgxNa1-xBiyIn1-yCl6 (CANBIC) double perovskite phosphor, is incorporated into the PDMS film to further enhance the energy yield in the ultraviolet (UV) region. The textured PDMS film with an optimized CANBIC content ultimately achieves a significant improvement in PCE from 21.770 to 23.136%. This enhancement is attributed to the increase in JSC by 2.381 mA/cm2 due to the reduced reflection losses (by antireflective PDMS) and down-converted UV energy (by CANBIC), providing a remarkable advance in LM toward highly efficient encapsulated PVs.

Pyramid Textured Photonic Films with High-Refractive Index Fillers for Efficient Radiative Cooling.

Sub-ambient cooling technologies relying on passive radiation have garnered escalating research attention owing to the challenges posed by global warming and substantial energy consumption inherent in active cooling systems. However, achieving highly efficient radiative cooling devices capable of effective heat dissipation remains a challenge. Herein, by synergic optimization of the micro-pyramid surface structures and 2D hexagonal boron nitride nanoplates (h-BNNs) scattering fillers, pyramid textured photonic films with remarkable solar reflectivity of 98.5% and a mid-infrared (MIR) emittance of 97.2% are presented. The h-BNNs scattering filler with high thermal conductivity contributed to the enhanced through-plane thermal conductivity up to 0.496W m-1 K-1 and the in-plane thermal conductivity of 3.175W m-1 K-1. The photonic films exhibit an optimized effective radiative cooling power of 201.2W m-2 at 40°C under a solar irradiance of 900W m-2 and a daily sub-ambient cooling effect up to 11°C. Even with simultaneous internal heat generation by a 10W ceramic heater and external solar irradiance of 500W m-2, a sub-ambient cooling of 5°C can be realized. The synergic matching strategy of high thermal conductivity scattering fillers and microstructured photonic surfaces holds promise for scalablesub-ambient radiative cooling technologies.

The role of interfacial Dzyaloshinskii–Moriya interaction in different heavy metal-based perpendicular magnetic systems and its application in spintronic devices

The interfacial Dzyaloshinskii–Moriya interaction (DMI) acting as an essential source to stabilize spin textures in ferromagnetic ultrathin films has revealed its significant role in spin–orbit torque (SOT)-driven magnetic switching. Based on a convincing homochiral Néel domain wall model, the in-plane (IP) magnetic field associated with the DMI effect has been confirmed as an essential prerequisite for deterministic SOT-driven switching. Although the presence of the IP field is required, the impact of IP field magnitude combined with the DMI effect on SOT-driven switching in different heavy metals (HMs) has never been considered together. In this research, SOT-induced switching under various IP fields in Pt, W, or Ta/CoFeB/MgO systems has been studied. The results show that the critical threshold current IC is almost independent of the IP field in the Pt-based structure; however, it significantly decreases with an increase in the IP field in the W- and Ta-based systems. Combining the derived DMI field and the magnetic domain nucleation, it is concluded that the significant difference in DMI fields and the domains' nucleating positions are the main reasons for the above phenomenon. Exploiting the distinct dependent properties of IC on the IP field, a six resistance state multilevel storage and five programmable spin logic gates are proposed and realized. This study provides insight into the special ability of the SOT effect modulated by the DMI, and also expands an effective way to construct spin-based devices based on this unique spintronic effect.

Alleviating internal stress in diamond-like carbon films for enhanced tribological performance under high contact pressure via interface texturing

Diamond-like carbon (DLC) films have found widespread applications across numerous fields due to their exceptional properties. Nevertheless, their significant internal stress has restricted their further utility, particularly in scenarios involving high-contact pressure conditions. In response to this challenge, we fabricated diamond-like carbon films with nano-depth interface texture. This nano-depth interface texturing technique helps alleviate the internal stress within the carbon film, thereby enhancing the tribological performance of diamond-like carbon films with textured interfaces, especially under high contact pressure. We successfully fabricated textured carbon films with a thickness of 1 μm, which exhibited excellent tribological performance even under pressures exceeding 1 GPa. Through atomistic molecular dynamics simulations, internal stress testing, and cross-sectional transmission electron microscopy imaging, we observed that the incorporation of nano-depth interface texturing resulted in an approximate 47.62 % increase in the thickness of the transition layer between the silicon substrate and the carbon film. Furthermore, there was a notable reduction of about 30 % in the internal stress exhibited by the carbon films. These findings are expected to expand the application of carbon films under higher contact pressure and facilitate the production of thicker films.

Polyelectrolyte-assisted uniform electron transporting layer on texture substrate for perovskite solar cells

Abstract Organic–inorganic halide perovskite solar cells using textured transparent conductive films exhibit high efficiencies with improved short-circuit current density. However, uniform electron transport layer (ETL) deposition on textures by solution process is challenging. In this study, uniform ETL were formed by sequentially spin- coating polyelectrolyte with positively and negatively charged segments and negative SnO2 colloid solution and electrostatically enhancing the SnO2 coverage. The stabilized power output (SPO) was improved from 12.9% to 18.6% by incorporating this polyelectrolyte/SnO2 bilayer.

Atomic-scale understanding on the influence of sliding angle on the interfacial structure and friction behavior of textured amorphous carbon films

Textured amorphous carbon (T:a-C) films have received great attention in the fields of hard drives, MEMS, and NEMS due to their excellent tribological properties. However, there is still a lack of research on the dependence of its friction behavior on different sliding angles. Especially, owing to the limitations of in-situ characterization in capturing the friction interface information, the potential friction mechanisms are still unclear. Hence, in this work T:a-C film with a rectangular shape was constructed and the impact of different sliding angles on friction behavior under dry friction condition was mainly explored through reactive molecular dynamics simulation. Results unveil that the friction properties of T:a-C films are closely dependent on the sliding angle. When the sliding angle increases from 0° to 45°, the decrease in the number of CC covalent bonds at the friction interface weakens the interfacial crosslinking effect, leading to a decrease in the friction coefficient by 20.11 %. However, as the sliding angle further increases from 45° to 90°, an increase in friction coefficient is observed, which is due to the increase of unsaturated bond content, weakening the interface passivation effect. These results reveal the friction mechanism of T:a-C films, induced by sliding angle, and effectively guide the design and technical application of textured a-C films.

Direct Melt-Calendaring of Highly Textured (Bi,Sb)2Te3 Thick Films: Superior Thermoelectric and Mechanical Performance via Strain Engineering.

The evolutions of chip thermal management and micro energy harvesting put forward urgent need for micro thermoelectric devices. Nevertheless, low-performance thermoelectric thick films as well as the complicated precision cutting process for hundred-micron thermoelectric legs still remain the bottleneck hindering the advancement of micro thermoelectric devices. In this work, an innovative direct melt-calendaring manufacturing technology is first proposed with specially designed and assembled equipment, that enables direct, rapid, and cost-effective continuous manufacturing of Bi2Te3-based films with thickness of hundred microns. Based on the strain engineering with external glass coating confinement and controlled calendaring deformation degree, enhanced thermoelectric performance has been achieved for (Bi,Sb)2Te3 thick films with highly textured nanocrystals, which can promote carrier mobility over 182.6 cm2 V-1 s-1 and bring out a record-high zT value of 0.96 and 1.16 for n-type and p-type (Bi,Sb)2Te3 thick films, respectively. The nanoscale interfaces also further improve the mechanical strength with excellent elastic modules (over 42.0GPa) and hardness (over 1.7GPa), even superior to the commercial zone-melting ingots and comparable to the hot-extrusion (Bi,Sb)2Te3 alloys. This new fabrication strategy is versatile to a wide range of inorganic thermoelectric thick films, which lays a solid foundation for the development of micro thermoelectric devices.