Tertiary Dentin Formation Research Articles

Visualization of Pulpal Structures by SWIR in Endodontic Access Preparation.

Endodontic access preparation is one of the initial steps in root canal treatments and can be hindered by the obliteration of pulp canals and formation of tertiary dentin. Until now, methods for direct intraoperative visualization of the 3-dimensional anatomy of teeth have been missing. Here, we evaluate the use of shortwave infrared radiation (SWIR) for navigation during stepwise access preparation. Nine teeth (3 anteriors, 3 premolars, and 3 molars) were explanted en bloc with intact periodontium including alveolar bone and mucosa from the upper or lower jaw of human body donors. Analysis was performed at baseline as well as at preparation depths of 5 mm, 7 mm, and 9 mm, respectively. For reflection, SWIR was used at a wavelength of 1,550 nm from the occlusal direction, whereas for transillumination, SWIR was passed through each sample at the marginal gingiva from the buccal as well as oral side at a wavelength of 1,300 nm. Pulpal structures could be identified as darker areas approximately 2 mm before reaching the pulp chamber using SWIR transillumination, although they were indistinguishable under normal circumstances. Furcation areas in molars appeared with higher intensity than areas with canals. The location of pulpal structures was confirmed by superimposition of segmented micro-computed tomography (µCT) images. By radiomic analysis, significant differences between pulpal and parapulpal areas could be detected in image features. With hierarchical cluster analysis, both segments could be confirmed and associated with specific clusters. The local thickness of µCTs was calculated and correlated with SWIR transillumination images, by which a linear dependency of thickness and intensity could be demonstrated. Lastly, by in silico simulations of light propagation, dentin tubules were shown to be a crucial factor for understanding the visibility of the pulp. In conclusion, SWIR transillumination may allow direct clinical live navigation during endodontic access preparation.

Advances in Regenerative Dentistry: A Systematic Review of Harnessing Wnt/β-Catenin in Dentin-Pulp Regeneration.

Dentin pulp has a complex function as a major unit in maintaining the vitality of teeth. In this sense, the Wnt/β-Catenin pathway has a vital part in tooth development, maintenance, repair, and regeneration by controlling physiological activities such as growth, differentiation, and migration. This pathway consists of a network of proteins, such as Wnt signaling molecules, which interact with receptors of targeted cells and play a role in development and adult tissue homeostasis. The Wnt signals are specific spatiotemporally, suggesting its intricate mechanism in development, regulation, repair, and regeneration by the formation of tertiary dentin. This review provides an overview of the recent advances in the Wnt/β-Catenin signaling pathway in dentin and pulp regeneration, how different proteins, molecules, and ligands influence this pathway, either upregulating or silencing it, and how it may be used in the future for clinical dentistry, in vital pulp therapy as an effective treatment for dental caries, as an alternative approach for root canal therapy, and to provide a path for therapeutic and regenerative dentistry.

The role of vitamin D receptor in predentin mineralization and dental repair after injury.

Dentin is a permeable and complex tubular composite formed by the mineralization of predentin that mineralization and repair are of considerable clinical interest during dentin homeostasis. The role of Vdr, a receptor of vitamin D, in dentin homeostasis remains unexplored. The aim of the present study was to assess the impact of Vdr on predentin mineralization and dental repair. Vdr-knockout (Vdr-/-) mice models were constructed; histology and immunohistochemistry analyses were conducted for both WT and Vdr-/- mice. The finding revealed a thicker predentin in Vdr-/- mice, characterized by higher expression of biglycan and decorin. A dental injury model was employed to observe tertiary dentin formation in Vdr-/- mice with dental injuries. Results showed that tertiary dentin was harder to form in Vdr-/- mice with dental injury. Over time, heightened pulp invasion was observed at the injury site in Vdr-/- mice. Expression of biglycan and decorin was reduced in the predentin at the injury site in the Vdr-/- mice by immunohistochemistry. Taken together, our results imply that Vdr plays a regulatory role in predentin mineralization and tertiary dentin formation during dentin homeostasis.

Hard tissue formation in pulpotomized primary teeth in dogs with nanomaterials MCM-48 and MCM-48/hydroxyapatite: an in vivo animal study

BackgroundThis animal study sought to evaluate two novel nanomaterials for pulpotomy of primary teeth and assess the short-term pulpal response and hard tissue formation in dogs. The results were compared with mineral trioxide aggregate (MTA).MethodsThis in vivo animal study on dogs evaluated 48 primary premolar teeth of 4 mongrel female dogs the age of 6–8 weeks, randomly divided into four groups (n = 12). The teeth underwent complete pulpotomy under general anesthesia. The pulp tissue was capped with MCM-48, MCM-48/Hydroxyapatite (HA), MTA (positive control), and gutta-percha (negative control), and the teeth were restored with intermediate restorative material (IRM) paste and amalgam. After 4–6 weeks, the teeth were extracted and histologically analyzed to assess the pulpal response to the pulpotomy agent.ResultsThe data were analyzed using the Kruskal‒Wallis, Fisher’s exact, Spearman’s, and Mann‒Whitney tests. The four groups were not significantly different regarding the severity of inflammation (P = 0.53), extent of inflammation (P = 0.72), necrosis (P = 0.361), severity of edema (P = 0.52), extent of edema (P = 0.06), or connective tissue formation (P = 0.064). A significant correlation was noted between the severity and extent of inflammation (r = 0.954, P < 0.001). The four groups were significantly different regarding the frequency of bone formation (P = 0.012), extent of connective tissue formation (P = 0.047), severity of congestion (P = 0.02), and extent of congestion (P = 0.01). No bone formation was noted in the gutta-percha group. The type of newly formed bone was not significantly different among the three experimental groups (P = 0.320).ConclusionMCM-48 and MCM-48/HA are bioactive nanomaterials that may serve as alternatives for pulpotomy of primary teeth due to their ability to induce hard tissue formation. The MCM-48 and MCM-48/HA mesoporous silica nanomaterials have the potential to induce osteogenesis and tertiary (reparative) dentin formation.

The Reparative Function of MMP13 in Tertiary Reactionary Dentinogenesis after Tooth Injury.

MMP13 gene expression increases up to 2000-fold in mineralizing dental pulp cells (DPCs), with research previously demonstrating that global MMP13 deletion resulted in critical alterations in the dentine phenotype, affecting dentine-tubule regularity, the odontoblast palisade, and significantly reducing the dentine volume. Global MMP13-KO and wild-type mice of a range of ages had their molar teeth injured to stimulate reactionary tertiary dentinogenesis. The response was measured qualitatively and quantitatively using histology, immunohistochemistry, micro-CT, and qRT-PCR in order to assess changes in the nature and volume of dentine deposited as well as mechanistic links. MMP13 loss affected the reactionary tertiary dentine quality and volume after cuspal injury and reduced Nestin expression in a non-exposure injury model, as well as mechanistic links between MMP13 and the Wnt-responsive gene Axin2. Acute pulpal injury and pulp exposure to oral fluids in mice teeth showed upregulation of the MMP13 in vivo, with an increase in the gene expression of Mmp8, Mmp9, and Mmp13 evident. These results indicate that MMP13 is involved in tertiary reactionary dentine formation after tooth injury in vivo, potentially acting as a key molecule in the dental pulp during dentine-pulp repair processes.

Ion release, biocompatibility, and bioactivity of resin-modified calcium hydroxide cavity liners

BackgroundThe placement of liners near the pulp area is essential for therapeutic effects and maintaining pulp health while stimulating the formation of tertiary dentin. This in vitro study aimed to evaluate the calcium release, pH, biocompatibility, solubility, and bioactivity of three resin-modified calcium hydroxide cavity liners.MethodsThe disc specimens of each cavity liner were prepared using polyethylene molds of 7 mm in diameter and 2 mm in height (n = 10). Three light-cure liners evaluated include Ultra-Blend Plus (UB), Base-it (BI), and Master Dent (MD). The samples were then immersed in flasks containing 10 mL of distilled water. Calcium ion release, pH, and solubility were evaluated in two weeks of incubation. The cytotoxicity of extracts adjacent to the specimens was evaluated by MTT assay using NIH/3T3 cells after 1, 3, and 7 days of incubation. The ability to induce the nucleation of calcium phosphates (CaPs) after 28-day immersion in a simulated body fluid was investigated by SEM-EDX analysis. Statistical analysis was performed using ANOVA, Kruskal-Wallis, and repeated measures tests at the significant level of 0.05.ResultsThere was a significant difference in the release of calcium ions among the three liners investigated on days 1, 7, and 14 (p < 0.05). UB liners exhibited a significantly higher amount of calcium release than the other two liners, followed by BI, and MD. On day 1, there was no significant difference in the average pH among the three liners. However, after day 7, the MD liner showed a significant decrease in pH compared to the other two liners. BI liner demonstrated the highest level of biocompatibility, followed by the MD and UB liners. UB showed a high calcium release, solubility with no alkalizing activity, and the formation of more mature Ca-rich apatite deposits than the other two liners.ConclusionBased on the results of this study, the cavity liner material’s performance is material dependent. It can impact ion release, biocompatibility, and bioactivity which are important factors to consider in clinical practice. Further studies are needed to investigate the long-term effects of different liner materials on oral tissues.

The Effects of Antimicrobial Photodynamic Therapy Used to Sterilize Carious Dentin on Rat Dental Pulp Tissue.

Antimicrobial photodynamic therapy (aPDT) used to sterilize carious dentin may irritate pulp tissues because of tissue-penetrating laser and singlet oxygen generation. This study aimed to assess the effects of aPDT on rat pulp tissues. A cavity formed in a rat maxillary first molar was treated with aPDT. The combined photosensitizer and laser irradiation conditions in the aPDT groups were as follows: methylene blue and 100 mW for 60 s, brilliant blue (BB) and 100 mW for 60 s, BB and 50 mW for 120 s, and BB and 200 mW for 30 s. Each cavity was treated with an all-in-one adhesive and filled with flowable resin. aPDT was not applied for the control. In each group, the rats were sacrificed on postoperative days 1 and 14, and thin sections of the treated teeth were prepared. Pulp tissue disorganization (PTD), inflammatory cell infiltration (ICI), and tertiary dentin formation (TDF) were evaluated. At 1-day evaluation, there were significant differences between the aPDT group and controls with respect to PTD and ICI (p < 0.01); 14 days later, almost all specimens showed tertiary dentin formation. The application of aPDT caused reversible damage to the rat pulp, while in the long term, healing occurred with the formation of tertiary dentin.

The Cytotoxic Assessment of Antibacterial-Enhanced Mineral Trioxide Aggregate Compared to Commercially Available Bioceramic Cements by Using Methyl-Thiazoldiphenyl-Tetrazolium (MTT) Assay on Human Dental Pulp Stem Cells: An In Vitro Study.

Background and objective Preserving the vitality of the tooth is of prime significance during therapies such as direct pulp capping and pulpotomy that promote tertiary dentine formation and healing of pulp stumps. Procedures like apexogenesis and apexification also stimulate dentin and bone formation for root growth and closure. Conventional mineral trioxide aggregate (MTA) has good biocompatible and physical properties like longer setting time, presence of a cytotoxic component, i.e., tricalcium aluminate (TCA), moderate compressive strength, and moderate antimicrobial activity. Eliminating TCA and the addition of antibacterial components would improve the properties of the cement. In this study, we aimed to assess the cytotoxicity of MTA Angelus, Biodentine, and two antibacterial-enhanced MTAs by using methyl-thiazoldiphenyl-tetrazolium (MTT) assay. Materials and methods Human dental pulp was extirpated from extracted third molars, and human dental pulp stem cells(HDPSCs)were isolated and characterized by flow cytometry. HDPSCs were treated with MTA, Biodentine, or two antibacterial-enhanced MTAs depending on the study group. The control group constituted the untreated HDPSCs. The cell viability of HDPSCs was assessed using an MTT assay on days one, three, and seven. Results Varied levels of cytotoxicity were noticed atdifferent time periods assessed using the tested materials, which was statistically significant (p=0.01). At alltime periods assessed, the highest cell viability was noticed with Biodentine (88.7% on the first day, 80.4% on the third day, and 91.8% on the seventh day). Antibacterial-enhanced MTAs, either added with metronidazole or doxycycline, had more mean viable cells compared to conventional MTA on the third and seventh day (p=0.043 and 0.018 respectively). Conclusion Antibacterial-enhanced MTAsshowed reduced cytotoxic properties when compared to conventional MTA. Biodentine was associated with the highestcell viability at all time periods.

Development of a new universal adhesive containing CPNE7-derived peptide and its potential role in reducing postoperative sensitivity.

Post-operative sensitivity (POS) is the most common clinical dental complaint after tooth preparation and resin-based composite restoration. In our previous study, copine 7 (CPNE7) and CPNE7-derived peptide (CPNE7-DP) induced in vitro odontoblast differentiation and in vivo dentin formation. Here, we incorporated CPNE7-DP into All-Bond Universal (ABU) adhesive, developing ABU/CPNE7-DP. This study aimed to investigate the possibility of reducing POS using ABU/CPNE7-DP. We first determined the stability of CPNE7-DP under low pH. Furthermore, we evaluated its dentinal tubule penetration, in vitro odontogenic differentiation potential, in vivo tertiary dentin formation and its effects on bonding performance. CPNE7-DP was stable at pH 1.2, even lower than ABU's pH of 3.2. ABU/CPNE7-DP can penetrate dentinal tubules, stimulate odontoblast differentiation in vitro and generate tertiary dentin with tubular structure in vivo without interfering with bonding performance. Therefore, ABU/CPNE7-DP may serve as a novel bioactive adhesive for reducing POS.

Axin2-CreERT2 mediated knockout of bone morphogenetic protein receptor type 1A caused abnormal secondary dentine and altered cell fate of Axin2-expressing odontogenic cells.

Inducing odontogenic differentiation and tubular dentine formation is extremely important in dentine repair and tooth regeneration. Bone morphogenic proteins (BMPs) signalling plays a critical role in dentine development and tertiary dentine formation, whilst how BMPR1A-mediated signalling affects odontoblastic differentiation of Axin2-expressing (Axin2+ ) odontogenic cells and tubular dentine formation remains largely unknown. This study aims to reveal the cellular and molecular mechanisms involved in the formation of secondary dentine. Axin2lacZ/+ mice harvested at post-natal 21 (P21) were used to map Axin2+ mesenchymal cells. Axin2CreERT2/+ ; R26RtdTomato/+ mice and Axin2CreERT2/+ ; R26RDTA/+ ; R26RtdTomato/+ mice were generated to observe the tempo-spatial distribution pattern of Axin2-lineage cells and the effect of ablation of Axin2+ cells on dentinogenesis, respectively. A loss-of-function model was established with Axin2CreERT2/+ ; Bmpr1afl/fl ; R26RtdTomato/+ (cKO) mice to study the role of BMP signalling in regulating Axin2+ cells. Micro-computed tomography, histologic and immunostainings, and other approaches were used to examine biological functions, including dentine formation, mineralization and cell differentiation in cKO mice. The results showed rich expression of Axin2 in odontoblasts at P21. Lineage tracing assay confirmed the wide distribution of Axin2 lineage cells in odontoblast layer and dental pulp during secondary dentine formation (P23 to P56), suggesting that Axin2+ cells are important cell source of primary odontoblasts. Ablation of Axin2+ cells (DTA mice) significantly impaired secondary dentine formation characterized with notably reduced dentine thickness (Mean of control: 54.11 μm, Mean of DTA: 27.79 μm, p = .0101). Furthermore, malformed osteo-dentine replaced the tubular secondary dentine in the absence of Bmpr1a with irregular cell morphology, abnormal cellular process formation and lack of cell-cell tight conjunction. Remarkably increased expression of osteogenic markers like Runx2 and DMP1 was detected, whilst DSP expression was observed in a dispersed manner, indicating an impaired odontogenic cell fate and failure in producing tubular dentine in cKO mice. Axin2+ cells are a critical population of primary odontoblasts which contribute to tubular secondary dentine formation, and BMP signalling pathway plays a vital role in maintaining the odontogenic fate of Axin2+ cells.

METTL3 enhances dentinogenesis differentiation of dental pulp stem cells via increasing GDF6 and STC1 mRNA stability

BackgroundThe dentinogenesis differentiation of dental pulp stem cells (DPSCs) is controlled by the spatio-temporal expression of differentiation related genes. RNA N6-methyladenosine (m6A) methylation, one of the most abundant internal epigenetic modification in mRNA, influences various events in RNA processing, stem cell pluripotency and differentiation. Methyltransferase like 3 (METTL3), one of the essential regulators, involves in the process of dentin formation and root development, while mechanism of METTL3-mediated RNA m6A methylation in DPSC dentinogenesis differentiation is still unclear.MethodsImmunofluorescence staining and MeRIP-seq were performed to establish m6A modification profile in dentinogenesis differentiation. Lentivirus were used to knockdown or overexpression of METTL3. The dentinogenesis differentiation was analyzed by alkaline phosphatase, alizarin red staining and real time RT-PCR. RNA stability assay was determined by actinomycin D. A direct pulp capping model was established with rat molars to reveal the role of METTL3 in tertiary dentin formation.ResultsDynamic characteristics of RNA m6A methylation in dentinogenesis differentiation were demonstrated by MeRIP-seq. Methyltransferases (METTL3 and METTL14) and demethylases (FTO and ALKBH5) were gradually up-regulated during dentinogenesis process. Methyltransferase METTL3 was selected for further study. Knockdown of METTL3 impaired the DPSCs dentinogenesis differentiation, and overexpression of METTL3 promoted the differentiation. METTL3-mediated m6A regulated the mRNA stabiliy of GDF6 and STC1. Furthermore, overexpression of METTL3 promoted tertiary dentin formation in direct pulp capping model.ConclusionThe modification of m6A showed dynamic characteristics during DPSCs dentinogenesis differentiation. METTL3-mediated m6A regulated in dentinogenesis differentiation through affecting the mRNA stability of GDF6 and STC1. METTL3 overexpression promoted tertiary dentin formation in vitro, suggesting its promising application in vital pulp therapy (VPT).

The Role of Cellular Metabolism in Maintaining the Function of the Dentine-Pulp Complex: A Narrative Review.

The cellular metabolic processes ensure the physiological integrity of the dentine-pulp complex. Odontoblasts and odontoblast-like cells are responsible for the defence mechanisms in the form of tertiary dentine formation. In turn, the main defence reaction of the pulp is the development of inflammation, during which the metabolic and signalling pathways of the cells are significantly altered. The selected dental procedures, such as orthodontic treatment, resin infiltration, resin restorations or dental bleaching, can impact the cellular metabolism in the dental pulp. Among systemic metabolic diseases, diabetes mellitus causes the most consequences for the cellular metabolism of the dentine-pulp complex. Similarly, ageing processes present a proven effect on the metabolic functioning of the odontoblasts and the pulp cells. In the literature, several potential metabolic mediators demonstrating anti-inflammatory properties on inflamed dental pulp are mentioned. Moreover, the pulp stem cells exhibit the regenerative potential essential for maintaining the function of the dentine-pulp complex.

Development of Rat Caries-Induced Pulpitis Model for Vital Pulp Therapy

Rodent animal models for vital pulp therapy are commonly used in dental research because their tooth anatomy and cellular processes are similar to the anatomy and processes in humans. However, most studies have been conducted using uninfected sound teeth, which makes it difficult to adequately assess the inflammatory shift after vital pulp therapy. In the present study, we aimed to establish a caries-induced pulpitis model based on the conventional rat caries model and then evaluate inflammatory changes during the wound-healing process after pulp capping in a model of reversible pulpitis induced by carious infection. To establish the caries-induced pulpitis model, the pulpal inflammatory status was investigated at different stages of caries progression by immunostaining targeted to specific inflammatory biomarkers. Immunohistochemical staining revealed that both Toll-like receptor 2 and proliferating cell nuclear antigen were expressed in moderate and severe caries-stimulated pulp, indicating that an immune reaction occurred at both stages of caries progression. M2 macrophages were predominant in moderate caries-stimulated pulp, whereas M1 macrophages were predominant in the severe caries-stimulated pulp. Pulp capping in teeth with moderate caries (i.e., teeth with reversible pulpitis) led to complete tertiary dentin formation within 28 d after treatment. Impaired wound healing was observed in teeth with severe caries (i.e., teeth with irreversible pulpitis). During the wound-healing process in reversible pulpitis after pulp capping, M2 macrophages were predominant at all time points; their proliferative capacity was upregulated in the early stage of wound healing compared with healthy pulp. In conclusion, we successfully established a caries-induced pulpitis model for studies of vital pulp therapy. M2 macrophages have an important role in the early stages of the wound-healing process in reversible pulpitis.

Three-Dimensional Assessment of Radiographic Changes after Indirect Pulp Capping Using Silver Diamine Fluoride with or without Potassium Iodide in Young Permanent Teeth (12-Month RCT)

The aim of this study was to conduct a three-dimensional (3D) evaluation of radiographic changes after indirect pulp capping (IPC) with silver diamine fluoride (SDF) with or without potassium iodide (KI) and resin-modified glass ionomer cement (RMGIC) in deep carious young permanent molars using cone-beam computed tomography (CBCT). 108 first permanent molars with deep occlusal cavitated caries lesions, in forty-nine 6- to 9-year-old children, were randomly allocated to one of 3 groups (n = 36) and treated with SDF+KI, SDF, and RMGIC as IPC materials. CBCT scans were taken at 0 and 12 months to assess tertiary dentin formation (volume and grey level intensity), increase in root length, and pathological changes such as secondary caries, periapical radiolucency, internal resorption, and obliteration of the pulp. The 3D image analysis procedures were performed using ITK-SNAP and 3D Slicer CMF. Comparisons were made using analysis of variance with a fixed effect for treatment and random effects for patient and patient-by-treatment to account for within-patient correlations. A two-sided 5% significance level was used. There were no significant differences among the three groups regarding tertiary dentin volume (p = 0.712) and grey level intensity (p = 0.660), increase in root length (p = 0.365), prevention of secondary caries (p = 0.63), and periapical radiolucency (p = 0.80) in the analysed 69 CBCT scans. The study did not find differences among the groups regarding quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure as shown by CBCT. Clinical Significance: The results show no significant differences in radiographic outcomes (quality and quantity of tertiary dentin formed, increase in root length, absence of secondary caries, and other signs of failure) when using SDF+KI, SDF, and RMGIC in IPC. The results of this study can help guide treatment decision-making regarding use of SDF and SDF+KI as IPC materials in deep cavitated lesions.

Dentin–Pulp Complex Response in Molars of Rats after Occlusal and Cervical Restorations with Conventional Glass Ionomer Cement and Nano-Hydroxyapatite Silica Glass Ionomer Cement

The purpose of this in vivo study was to evaluate and compare the dentin–pulp complex response following occlusal and cervical restorations in rat molars restored with nano-hydroxyapatite silica glass ionomer cement (nano-HA-SiO2-GIC) and conventional glass ionomer cement (c-GIC). In total, 64 maxillary first molars of 32 male Wistar rats were restored using Fuji IX (c-GIC) and nano-HA-SiO2-GIC using a split-mouth design. Half of them were reserved for the occlusal type of restoration while the other half was for cervical restorations. After one week and one month, rats were euthanized and were stained with hematoxylin and eosin, Masson’s trichrome, and Brown and Brenn techniques for histological examination. Parameters such as disorganization of the pulp tissue, inflammatory cell infiltration, detection of bacteria, and tertiary dentin deposition were measured for each group. One week after sacrifice, the odontoblastic layer was disrupted, and moderate inflammation in the pulp area close to the cut dentin was observed in both types of restorations. Nano-HA-SiO2-GIC showed significantly superior properties when assessed based on tertiary dentin formation as compared to c-GIC. One month after sacrifice, there was no evidence of disruptions of the odontoblast layer, which exhibited a normal palisade appearance in both groups. In terms of inflammation, the pulp tissue recovered in almost all cases except one of c-GIC, but a few cases of the nano-HA-SiO2-GIC group still displayed mild-to-moderate inflammatory reactions, especially of the occlusal type. Both c-GIC and nano-HA-SiO2-GIC exhibited favorable responses in terms of biocompatibility. Nano-HA-SiO2-GIC exerted more inflammation but encouraged better tertiary dentin formation compared to c-GIC.

Wnt3a promotes odonto/osteogenic differentiation in vitro and tertiary dentin formation in a rat model.

To investigate the effect of Wnt3a on odonto/osteogenic differentiation of stem cells isolated from human exfoliated deciduous teeth (SHEDs) and reparative dentine formation in a rat model. Stem cells isolated from human exfoliated deciduous teeth were cultured in media with Wnt3a (50-200 ng/ml). Wnt activation was confirmed by β-catenin immunocytochemistry. Colony-forming unit assay (normalized percentage area), osteogenic gene expression analysis by real-time polymerase chain reaction and mineralization assays measured by the absorption at 540 nm were performed. Tertiary dentine formation in vivo was evaluated using 8-week-old, male Wistar rats. Cavities with pinpoint pulp exposure by a sharp instrument were prepared at the mesial surface of the first molars. Teeth were divided into (n=6): (1) distilled water (negative control), (2) phosphate-buffered saline (PBS), (3) lithium chloride in DI (20 μM), and (4) Wnt3a in PBS (200 ng/ml). Collagen sponge was used as a scaffold. The cavity was sealed with glass ionomer restoration. Four weeks later, animals were euthanized by sodium pentobarbital (120 mg/kg body weight). Hard tissue formation was evaluated using micro-computerized tomography. Sixty consecutive slides from the initial plane were analysed and calculated as bone/dentine volume per total tissue volume. Paraffin sections (2μm) were stained with haematoxylin and eosin and Masson's trichrome for morphological evaluation. Data are presented as the mean ± standard error. Mann-Whitney U test was used for two-group comparison. Kruskal Wallis followed by pairwise comparison was employed for three or more group comparisons. Statistical analysis was performed using GraphPad Prism 7. Differences were considered significant at p < .05. Wnt3a decreased SHEDs colony formation and increased OSX, BMP2, and DMP1 expression, corresponding to an increase in mineralization. Additionally, a significant increase in dentine/bone volume per total tissue volume was observed in Wnt3a treated defects. Dentine bridge formation at the exposure sites treated with Wnt3a demonstrated, while fibrous tissues were observed in the control. Wnt3a suppressed proliferation, increased osteogenic differentiation of SHEDs and promotes tertiary dentine formation. Wnt3a could be utilized as biological molecule for vital pulp therapy.

Erythropoietin induces odontoblastic differentiation of human-derived pulp stem cells via EphB4-Mediated MAPK signaling pathway.

Human-derived pulp stem cells play key roles during dentinogenesis. Erythropoietin is reportedly involved in osteoblastogenesis and facilitates bone formation. However, the mechanism is still unknown. This research was to study the potential of erythropoietin in enhancing odontoblastic differentiation of human-derived pulp stem cells and to determine the underlying mechanism. The human-derived pulp stem cells were treated with erythropoietin, EphB4 inhibitor, and MAPK inhibitors, and the odontoblastic differentiation was measured by ALP staining, ALP activity assay, alizarin red S staining, and their quantitative analysis, and RT-qPCR of DSPP, DMP1, OCN, and RUNX2. The direct pulp capping model was established to evaluate the formation of tertiary dentin after treatment with erythropoietin. Western blot assay was conducted to assess relevant protein expressions in the phosphorylated EphB4 and MAPK pathway. The results showed that erythropoietin promoted odontoblastic differentiation of human-derived pulp stem cells at 20 U/ml. Erythropoietin induced tertiary dentin formation in vivo. The potential mechanism of this was upregulating phosphorylated EphB4 and phosphorylated MAPK; furthermore, this effect could be decreased by EphB4 inhibitors, which inhibited MAPK phosphorylation. Blockage of MAPK pathways attenuated human-derived pulp stem cells' odontoblastic differentiation, suggesting that MAPK pathways are involved. Erythropoietin induced tertiary dentin formation in vivo. And erythropoietin enhanced human-derived pulp stem cells' odontoblastic differentiation via the EphB4-mediated MAPK signaling pathway.

“Bioactive Dental Composites And Bonding Agents”

Existing dental restorative materials are largely inert and used to restore lost tooth components. In this article, we will look back at the progress that has been made on a new class of bioactive materials that can not only restore the loss of tooth structure but also serve as therapeutic agents. Replacement of lost minerals, inhibition of recurrent caries, neutralization of acids, repulsion of proteins, suppression of biofilms and acid production, demonstration of low cytotoxicity similar to current resins, protection of dental pulp, and promotion of tertiary dentin formation are all possible with remineralizing and antibacterial composites and bonding agents. The ability to ion release and prevent caries is a promising use for this emerging class of bioactive materials.

Silver Diamine Fluoride as Indirect Pulp Capping Agent in Primary Molars: A Case Series

According to the current recommendations of the American Academy of Pediatric Dentistry (AAPD), Indirect Pulp Capping or Indirect Pulp Treatment (IPT) is defined as a procedure that preserves the deepest cavities adjacent to the pulp to prevent pulp exposure. Preserving and protecting the vital pulp through remineralisation of hypomineralised carious dentin poses a significant challenge in restorative dentistry. Traditionally, managing deep caries often led to pulp exposure and subsequent root canal treatment. Selective or stepwise caries removal is based on the concept of halting the progression of carious destruction, allowing for biological repair of the pulp-dentin complex by promoting the formation of tertiary dentin between temporary and definitive restorations. Silver Diamine Fluoride (SDF) has gained popularity due to its unique combination of silver and fluoride, which provides antimicrobial and remineralising properties. In this case series of three cases, three-year-old preschool boy, five year old girl and five year old girl, in whom, deep carious lesions in primary molars were treated using selective caries removal techniques with SDF as an IPT agent, resulting in successful minimally invasive restorative procedures. This case series underscores the importance of employing selective caries removal techniques and the potential use of SDF as an IPT agent in such scenarios to preserve tooth vitality in a less invasive therapeutic approach suitable for the pediatric population.

Novel Functional Peptide for Next-Generation Vital Pulp Therapy

Although vital pulp therapy should be performed by promoting the wound-healing capacity of dental pulp, existing pulp-capping materials were not developed with a focus on the pulpal repair process. In previous investigations of wound healing in dental pulp, we found that organic dentin matrix components (DMCs) were degraded by matrix metalloproteinase-20, and DMC degradation products containing protein S100A7 (S100A7) and protein S100A8 (S100A8) promoted the pulpal wound-healing process. However, the direct use of recombinant proteins as pulp-capping materials may cause clinical problems or lead to high medical costs. Thus, we hypothesized that functional peptides derived from recombinant proteins could solve the problems associated with direct use of such proteins. In this study, we identified functional peptides derived from the protein S100 family and investigated their effects on dental pulp tissue. We first performed amino acid sequence alignments of protein S100 family members from several mammalian sources, then identified candidate peptides. Next, we used a peptide array method that involved human dental pulp stem cells (hDPSCs) to evaluate the mineralization-inducing ability of each peptide. Our results supported the selection of 4 candidate functional peptides derived from proteins S100A8 and S100A9. Direct pulp-capping experiments in a rat model demonstrated that 1 S100A8-derived peptide induced greater tertiary dentin formation compared with the other peptides. To investigate the mechanism underlying this induction effect, we performed liquid chromatography–tandem mass spectrometry analysis using hDPSCs and the S100A8-derived peptide; the results suggested that this peptide promotes tertiary dentin formation by inhibiting inflammatory responses. In addition, this peptide was located in a hairpin region on the surface of S100A8 and could function by direct interaction with other molecules. In summary, this study demonstrated that a S100A8-derived functional peptide promoted wound healing in dental pulp; our findings provide insights for the development of next-generation biological vital pulp therapies.