Α-terpineol Research Articles

Efficacy of Terpinen-4-ol Combined With Eyelid Deep Cleaning for the Treatment of Demodex Blepharitis: A Randomized, Open-Label Trial.

We aimed to evaluate the clinical efficacy of a combined treatment regimen involving terpinen-4-ol (T4O) and eyelid deep cleaning for managing Demodex blepharitis. In this randomized, open-label trial, 40 patients diagnosed with Demodex blepharitis at the Cornea Specialty Clinic of Hankou Aier Eye Hospital were enrolled. Participants were randomly assigned to either a T4O or a combination treatment group. The T4O group used T4O cleaning wipes exclusively for two months. The combination group used T4O cleaning wipes and underwent deep eyelid cleaning at three scheduled visits (initial, first-, and second-month time points). A final follow-up was conducted one month after completion of treatment (three months after the beginning of treatment). At each visit, we assessed the number of Demodex mites, the ocular surface disease index (OSDI), eyelid margin sign scores, and corneal fluorescein staining scores. After two months of treatment, both the T4O and combination groups exhibited significant reductions in Demodex mite counts of 5.65 ± 6.03 and 7.75 ± 6.91, respectively. The T4O group, however, showed an increase in mite counts one month after ceasing treatment. Conversely, the combination group maintained and enhanced the reduction in mite counts post-treatment, with a significant difference at the third-month follow-up (8.70 ± 6.81 vs. 4.15 ± 6.91, P = 0.043). Although both groups demonstrated overall declines in OSDI scores post-treatment, only the combination group showed significant improvements at the second- and third-month follow-ups. No adverse events were reported in either group. Treatment with T4O wipes for two months significantly reduces Demodex mite counts, although there is a notable risk of mite rebound when treatment is ceased. Combining T4O wipes and eyelid deep cleaning offers a more effective reduction in Demodex mite counts and improvement in ocular symptoms compared to T4O treatment alone. The study finds that T4O combined with eyelid deep cleaning is more effective in treating Demodex blepharitis, highlighting the need for appropriate treatment duration and adjunctive therapies.

(E, E)-farnesol and myristic acid-loaded lipid nanoparticles overcome colistin resistance in Acinetobacter baumannii

The rise of colistin-resistant Acinetobacter baumannii has severely limited treatment options for infections caused by this pathogen. While terpene alcohols and fatty acids have shown potential to enhance colistin’s efficacy, but their high lipophilicity limits their clinical application. To address this, we developed water-dispersible lipid nanoparticles (LNPs) in two sizes (40 nm and 130 nm), loaded with these compounds to act as colistin adjuvants. Among eleven LNP formulations, six significantly reduced colistin’s minimum inhibitory concentration (MIC) by 16- to 64-fold. The most effective, featuring (E,E)-farnesol and myristic acid, were further examined for bactericidal activity, membrane disruption, cytotoxicity, and in vivo efficacy in Galleria mellonella larvae. Time-kill studies demonstrated that at an adjuvant concentration of 60 mg/L, these LNPs eradicated bacteria when combined with 4 mg/L free colistin for resistant isolates (MIC = 128 mg/L) and 0.06 mg/L for susceptible isolates (MIC = 0.5 mg/L), without regrowth. Myristic acid-loaded LNPs combined with free colistin at 1/8 MIC resulted in a 4.2-fold higher mortality rate than the combination with (E,E)-farnesol-loaded LNPs in resistant strains. This result was correlated with a 45-fold faster increase in inner membrane permeability, measured by propidium iodide (PI) uptake, in the presence of myristic acid-loaded LNPs compared with a 13-fold faster increase with (E,E)-farnesol-loaded LNPs. DiSC3(5) assays revealed that LNPs alone depolarised the bacterial inner membrane, with enhanced effects when combined with colistin at 1/8 MIC, a result not observed with colistin alone at this concentration. As with PI uptake, this inner membrane depolarising effect was more pronounced with myristic acid-loaded LNPs than with (E,E)-farnesol-loaded LNPs in resistant strains, suggesting that the colistin adjuvant effect of these lipophilic compounds is due to their ability to help colistin destabilise the bacterial inner membrane. Cytotoxicity assays demonstrated no adverse effects on bone marrow macrophages after 6 h of exposure, although some toxicity was observed after 24 h. No mortality was observed in Galleria mellonella larvae over 7 days following three consecutive days of treatment with colistin and LNPs. Notably, the combination of (E,E)-farnesol-loaded LNPs and colistin significantly improved the survival of Galleria infected with A.baumannii. These results suggest that lipophilic-adjuvant-loaded LNPs may offer a promising strategy to enhance colistin efficacy and combat antibiotic-resistant A. baumannii infections.

Electricallymodified bacterial cellulose tailored with plant based green materials for infected wound healing applications

Effective treatment of infected wounds remains a challenge due to the rise of antibiotic-resistant microorganisms. The development of advanced materials with strong antimicrobial properties is necessary to address this issue. In this study, a unique composite of electrically modified bacterial cellulose (EBC) with allantoin (ABC) and zein was developed by dipping diffusion method. Morphological structural analysis revealed a uniform distribution of zein and aligned fibers, confirming the synthesis of the ABC-Zein composite. The formation of ABC-Zein was further confirmed by attenuated total reflection-Fourier transform infrared (ATR-FTIR), which displayed additional peaks corresponding to EBC, indicating the incorporation of zein into ABC. X-ray diffraction (XRD) analysis of ABC-Zein demonstrated a similar crystalline structure with EBC. The ABC-Zein showed mechanical integrity (tensile strength: 1.15 ± 0.21 MPa), thermal stability (degradation temperature: 290 °C), porous structure (porosity: 40.23 ± 0.21 %), and hydrophilic (water contact angle: 53.3 ± 5.3°) properties. Furthermore, the antimicrobial agent terpinen-4-ol (T4O), derived from tea tree oil, was incorporated into the ABC-Zein composite. Biological studies confirmed the antimicrobial efficacy (Staphylococcus aureus inhibition: 88.5 ± 7.19 %) and biocompatible (cell viability: 84.95 ± 5.6 %, hemolysis: 4.479 ± 0.39 %) nature of the T4O-ABC-Zein composite. The combined effects of the aligned fiber structure, zein protein, and antimicrobial T4O significantly enhanced infected wound healing by day 7, promoting inflammatory response, granular tissue formation, cell proliferation, and angiogenesis. By day 14, T4O-ABC-Zein facilitated complete wound healing, with reepithelization, collagen I deposition, and downregulation of CD 31, Ki67, and α-SMA. Overall, the innovative T4O-ABC-Zein composite, with an aligned fiber structure, improved biocompatibility, and antimicrobial properties, holds significant potential for the treatment of infected wounds.

Genetic Variation, Polyploidy, Hybridization Influencing the Aroma Profiles of Rosaceae Family.

The fragrance and aroma of Rosaceae plants are complex traits influenced by a multitude of factors, with genetic variation standing out as a key determinant which is largely impacted by polyploidy. Polyploidy serves as a crucial evolutionary mechanism in plants, significantly boosting genetic diversity and fostering speciation. This review focuses on the Rosaceae family, emphasizing how polyploidy influences the production of volatile organic compounds (VOCs), which are essential for the aromatic characteristics of economically important fruits like strawberries, apples, and cherries. The review delves into the biochemical pathways responsible for VOC biosynthesis, particularly highlighting the roles of terpenoids, esters alcohols, aldehydes, ketones, phenolics, hydrocarbons, alongside the genetic mechanisms that regulate these pathways. Key enzymes, such as terpene synthases and alcohol acyltransferases, are central to this process. This review further explores how polyploidy and hybridization can lead to the development of novel metabolic pathways, contributing to greater phenotypic diversity and complexity in fruit aromas. It underscores the importance of gene dosage effects, isoenzyme diversity, and regulatory elements in determining VOC profiles. These findings provide valuable insights for breeding strategies aimed at improving fruit quality and aligning with consumer preferences. Present review not only elucidates the complex interplay between genomic evolution and fruit aroma but also offers a framework for future investigations in plant biology and agricultural innovation.

Antifungal activities of some citrus essential oils against Pyricularia oryzae

Rice is a staple food worldwide because many families depend on it as an everyday source of food. However, there are some agents posing as threat to the availability of rice worldwide thereby threatening food security. Pyricularia oryzae is a fungal agent notable for causing rice blast disease thereby causing shortage in the production of rice. Essential oils (EOs) from peels (fresh and dried) of three species of citrus fruit (lime, grapefruit and tangerine) were investigated for their antifungal activity against P. oryzae. The EOs were extracted and analysed for their composition using standard analytical techniques. Their antifungal activities were also tested on potato dextrose agar (PDA) medium using disc diffusion method and the results obtained were compared with standard antifungal agents. Dried tangerine EO had the highest fungal mycelial growth inhibition (90%) which was followed by fresh tangerine EO (76.2%). The compounds detected in the essential oils composed majorly hydrocarbons and oxygenated hydrocarbons with limonene, beta myrcene and alpha terpineol detected in fairly high amount in all the investigated essential oils. This study, shows that the peels of these citrus fruits could be of great importance in combating the scourge of P. oryzae, reducing the occurrence of rice blast disease, enhancing rice availability as a staple food and by extension, ensuring food security. These attributes highlight the potential benefits of citrus fruit peels instead of regarding them as mere waste materials.

Development of Methodology for molecular crystallization of Menthol

Menthol, terpene alcohol with a strong minty, cooling odor and taste is highly popular in food, flavor, cosmetic and pharmaceutical industries. Crystallization of menthol from mint oil is a tedious process involving high cost and a much longer period. The present study has been undertaken to devise a new method with low input and with higher production rates. The crystallization of menthol was performed by the methods including Temperature programmed cooling process (TPCP); Short-path molecular fractional distillation (SPMFD) and Stripping crystallization (SC). About 99 % menthol contained in the mint oil was recovered during the crystallization process. The characterization techniques such as scanning electron microscopy (SEM) for surface morphology, x-ray diffraction (XRD) for crystal structure and crystallite size evaluation, and FTIR and Raman spectroscopy for analyzing the chemical nature of the crystals.

Sanguisorba officinalis L. ethanolic extracts and essential oil - chemical composition, antioxidant potential, antibacterial activity, and ex vivo skin permeation study.

Sanguisorba officinalis L. is classified as a medicinal plant and used in traditional medicine. The root of this plant is mainly used as a medicinal raw material, but the above-ground parts are also a valuable source of health-promoting biologically active compounds. The study aimed to evaluate the antioxidant activity and total polyphenol content (TPC) of extracts prepared in 70% and 40% aqueous ethanol solution (dry extract content 50-500g/L) from the aerial parts of S. officinalis. The essential oil was isolated from the tested raw material, and its composition was determined using GC-MS. Ethanolic extracts and essential oil have been tested for antibacterial activity. The extract in 70% v/v ethanol (dry extract content: 500g/L) was subjected to HPLC analysis for the content of selected phenolic acids and an ex vivo skin permeation study. The ability of these metabolites to permeate and accumulate in the skin was analysed. Extracts prepared at both ethanol concentrations showed similar antioxidant activity and TPC. Depending on the method, concentration of solvent, and dry extract content (50-500g/L), the activity ranged from 1.97 to 84.54g Trolox/L. TPC range of 3.80-37.04gGA/L. Gallic acid (424mg/L) and vanillic acid (270mg/L) had the highest concentrations among the phenolic acids analysed. Vanillic acid (10μg) permeates the skin at the highest concentration. The highest accumulation in the skin was found for 2,5-dihydroxybenzoic acid (53μg/g skin), 2,3-dihydroxybenzoic acid (45μg/g skin), and gallic acid (45μg/g skin). The tested ethanolic extracts exhibited antibacterial activity. Samples with a dry extract concentration of 500g/L showed the largest growth inhibition zones. The most sensitive strains to these extracts were P. aeruginosa (24mm), S. lutea (23mm), and S. pneumoniae (22mm). The smallest inhibition zones were observed for B. subtilis (17mm). The essential oil showed weaker antimicrobial activity (growth inhibition zone 8-10mm). The GC-MS method identified 22 major components of the essential oil, including aliphatic hydrocarbons, unsaturated terpene alcohols, aliphatic aldehydes, unsaturated and saturated fatty acids, sesquiterpene, phytyl ester of linoleic acid, nitrogen compound, phytosterol, terpene ketone, phenylpropanoids, aliphatic alcohol, diterpenoid, aromatic aldehyde, and aliphatic carboxylic acid. The conducted research has shown that ethanolic extracts from Sanguisorbae herba are a valuable source of compounds with antibacterial and antioxidant potential, including phenolic acids. The fact that selected phenolic acids contained in the tested extract have the ability to permeate and accumulate in the skin provides the basis for conducting extended research on the use of extracts from this plant raw material in cosmetic and pharmaceutical preparations applied to the skin.

The therapeutic potential and molecular mechanism of Alpha-pinene, Gamma-terpinene, and P-cymene against melanoma cells

The purpose of this study is to investigate the potential anticarcinogenic effects of three phytochemicals, namely Alpha-pinene (AP), Gamma-terpinene (GT), and P-cymene (PC), on melanoma cells (A2058 cell line). Additionally, the study aims to explore the synergistic activities of these phytochemicals with Dacarbazine, a chemotherapy drug. To understand the molecular mechanism involved in apoptosis induction in the A-2058 cell line, it was used AO/EB staining for apoptosis detection and cell cycle analysis, monitored through flow cytometry. It also determined the mRNA expression levels of different apoptosis-regulatory genes, including p53, Bax, NF-kB, Bcl-2, Bcl-xl, and caspase-3. The antitumor activities of these phytochemicals and their combinations were investigated in a subcutaneous mouse tumor model. The tumor diameter was 21.4 ± 1.1 mm in the Dacarbazine treatment group and 42.4 ± 3.1 mm in the control group. The antitumoral activities of AP and PC in the tumor model were similar to those of Dacarbazine. On the other hand, GT exhibited remarkable antitumoral activity, with a 1.75-fold reduction in tumor diameter compared to the Dacarbazine group. When different combinations of phytochemicals and Dacarbazine were used, the GT plus Dacarbazine treatment group was found to have a 3.5-fold reduction in tumor diameter compared to the Dacarbazine group. The tumor diameters in the Dacarbazine, AP plus GT, GT plus Dacarbazine, and AP plus Dacarbazine treatment groups were 21.4 ± 1.1, 7.6 ± 2.2, 8.6 ± 0.5, and 6.2 ± 1.9 mm, respectively.

3D Printable Materials Based on Renewable Polymers from Terpene Alcohols and Calcium Carbide

AbstractThe transition to a sustainable future requires the use of waste‐free technologies for production. Potentially, additive technologies can be a promising approach for accessing circular economy due to the precise amount of feeding materials and the absence of molds. However, the initial feeding materials for additive approaches are often based on non–renewable hydrocarbon sources. This work focused on the use of polymers derived from terpene alcohols to develop a filament suitable for 3D printing. Initially, the vinylation of menthol using calcium carbide was optimized and scaled up, then a series of terpenyl–based vinyl ethers were obtained under optimal conditions. The cationic polymerization of vinyl ethers was also scaled up and resulted in 99 % yield of the polymers, which was subsequently subjected to hot extrusion. The initial terpenol was used as an additive to increase polymer flexibility. The addition of menthol (30 wt %) to polyvinyl menthol led to the suitable filament. Using the filament, a series of objects were 3D printed at 125 °C. The material demonstrated good sinterability and adhesion to glass and shrinkage comparable to that of commercial 3D printing filaments. Furthermore, the polymers obtained were used as additives to enhance the adhesion of commercially available filaments.

ANTIMICROBIAL WOUND DRESSINGS FOR FULL-THICKNESS INFECTED BURN WOUNDS.

Infection of wounds delays healing, increases treatment costs, and leads to major complications. Current methods to manage such infections include antibiotic ointments and antimicrobial wound dressings, both of which have significant drawbacks, including frequent reapplication and contribution to antimicrobial resistance. In this work, we developed wound dressings fabricated with a medical-grade polyurethane coating composed of natural plant secondary metabolites, cinnamaldehyde, and alpha-terpineol. Our wound dressings are easy to change and do not adhere to the wound bed. They kill gram-positive and -negative microbes in infected wounds due to the Food and Drug Administration-approved for human consumption components. The wound dressings were fabricated by dip coating. Antimicrobial efficacy was determined by quantifying the bacteria colonies after a 24 h of immersion. Wound healing and bacterial reduction were assessed in an in vivo full-thickness porcine burn model. Our antimicrobial wound dressings showed a > 5-log reduction (99.999%) of different gram-positive and gram-negative bacteria, while maintaining absorbency. In the in vivo porcine burn model, our wound dressings were superior to bacitracin in decreasing bacterial burden during daily changes, without interfering with wound healing. Additionally, the dressings had a significantly lower adhesion to the wound bed. Our antimicrobial wound dressings reduced the burden of clinically relevant bacteria more than commercial antimicrobial wound dressings. In an in vivo infected burn wound model, our coatings performed as well or better than bacitracin. We anticipate that our wound dressings would be useful for the treatment of various types of acute and chronic wounds.

Analysis of volatile floral fragrance components of Camellia yuhsienensis Hu by HS‐SPME/GC–MS

AbstractThe flowers of selected Camellia yuhsienensis Hu specimens were studied at different stages of flowering to determine the volatile components of floral fragrance and how their concentrations changed during efflorescence. The mechanism of fragrance formation and release was also studied in order to provide a theoretical basis for the practical use of C. yuhsienensis Hu flowers. Headspace solid‐phase microextraction (HS‐SPME) was used to extract the natural floral volatile oils of C. yuhsienensis Hu at the different stages, and the floral fragrance components were analysed by gas chromatography–mass spectrometry (GC–MS). A total of 31, 59 and 55 compounds were detected at the budding, early‐blooming and full‐blooming stages respectively. These floral fragrance components included terpene alcohols, as well as other aromatic and aliphatic compounds, and the relative concentrations of the various compounds at different stages of flowering, were different, and those of fatty alcohols and terpene alcohols having higher relative contents at all stages. The main component at the budding stage of C. yuhsienensis Hu was ocimene, which has a grassy fragrance, accompanied by the scent of neroli oil, which gives it a refreshing, gentle and sweet, and explains why the floral fragrance of C. yuhsienensis Hu at the budding stage is extremely thin: the main component during the early‐blooming stage was 3‐carene. A higher percentage of 3‐carene increased the sweetness of the scent, manifesting the typical fragrant characteristics of C. yuhsienensis Hu. The main identified compound at the full‐blooming stage was α‐farnesene, which has a delicate fragrance, accompanied by a balsamic aroma, similar to the scent of gardenia, which is consistent with the sensory characteristics of C. yuhsienensis Hu.

A randomized fellow-eye controlled trial study of 1% terpinen-4-ol vs 1% tea tree oil eyelid cleanser for the treatment of meibomian gland dysfunction

PurposeTo compare the pre- and post-treatment differences in non-invasive tear breakup time (NITBUT) between a 1 % terpinen-4-ol (T4O) and a 1 % tea tree oil (TTO) eyelid cleanser DesignA randomized controlled trial MethodThirty-three participants diagnosed with MGD were enrolled. All patients and the outcome evaluator were masked to the treatment allocation. One eye of each patient was randomly assigned to receive the T4O cleanser, while the fellow eye received the TTO cleanser. Baseline and eight week assessments included the collection of the ocular surface disease index (OSDI) questionnaire, NITBUT (in seconds), lipid layer thickness (in nanometers), ocular surface staining scores, and the presence of Demodex as cylindrical dandruff. The main outcome measurement was the pre- and post-treatment difference in NITBUT. Patient preference, safety, and tolerability were also assessed. ResultsThere was a statistically significant increase in NITBUT in the T4O group (n = 30; 2.27 ± 1.09; 95 % confidence interval [CI]: 0.12–4.42; p = 0.038), but not in the TTO group (n = 30; 0.04 ± 1.10; 95 % CI: -2.19–2.11; p = 0.972). Both groups showed significant improvement in post-treatment ocular surface staining scores. Fifteen subjects (50 %) preferred TTO due to less cooling sensation experienced during application, nine (30 %) preferred T4O, and six (20 %) had no preference. No major adverse events were observed. ConclusionEyelid cleaning with 1 % T4O in MGD for eight weeks was found to increase NITBUT with good tolerability, although it was less preferred compared to TTO.

Esterification and Etherification of Aliphatic Alcohols Enabled by Catalytic Strain-Release of Donor-Acceptor Cyclopropane.

We herein disclose a highly efficient protocol for the esterification and etherification of alcohols, leveraging a Sc(OTf)3-catalyzed ring-strain release event in the meticulously designed, chromatographically stable mixed anhydrides or benzyl esters that incorporate an intramolecular donor-acceptor cyclopropane (DAC). This versatile method facilitates the straightforward functionalization of sugar, terpene, and steroid alcohols under mild acidic conditions, as showcased by the single-catalyst-driven, dual protection of sugar diol.

Terpinen-4-ol Improves Lipopolysaccharide-Induced Macrophage Inflammation by Regulating Glutamine Metabolism.

Terpinen-4-ol (T-4-O) is an important component of tea tree oil and has anti-inflammatory effects. Currently, there are very few studies on the mechanisms by which T-4-O improves lipopolysaccharide (LPS)-induced macrophage inflammation. In this study, LPS-stimulated mouse RAW264.7 macrophages were used as a model to analyze the effects of T-4-O on macrophage inflammatory factors and related metabolic pathways in an inflammatory environment. The results showed that T-4-O significantly decreased the expression levels of inflammatory cytokines induced by LPS. Cellular metabolism results showed that T-4-O significantly decreased the ratio of the extracellular acidification rate and oxygen consumption rate. Non-targeted metabolomics results showed that T-4-O mainly affected glutamine and glutamate metabolism and glycine, serine, and threonine metabolic pathways. qPCR results showed that T-4-O increased the transcript levels of GLS and GDH and promoted glutamine catabolism. Western blotting results showed that T-4-O inhibited the mTOR and IκB, thereby decreasing NF-κB activity. The overall results showed that T-4-O inhibited mTOR phosphorylation to promote glutamine metabolism and increased cell oxidative phosphorylation levels, thereby inhibiting the expression of LPS-induced inflammatory cytokines.

Effect of terpene alcohol fragment and type of anion in the pyrrolidinium salts on the physicochemical properties and antibacterial activity

Pyrrolidinium salts containing in the cation chiral substituent derived from three terpene alcohols: (–)-menthol, (–)-borneol, and (+)-fenchol and consisting of six different anions: chloride [Cl]−, tetrafluoroborate [BF4]−, hexafluorophosphate [PF6]−, trifluoromethanesulfonate [OTf]−, bis(trifluoromethylsulfonyl)imide [NTf2]−, bis(pentafluoroethylsulfonyl)imide [NPf2]−, and perfluorobutanesulfonate [C4F9SO3]− were compared in terms of physicochemical properties and antimicrobial activity. The thermal properties including phase transition temperatures, thermal stability, specific rotation have been taken into consideration. Liquid pyrrolidinium salts with [NTf2]− and [NPf2]− anions, which can be classified as chiral ionic liquids, have also been compared in terms of density, dynamic viscosity, surface tension and contact angle on the surfaces of different polarity. The selected pyrrolidinium salts were evaluated for activity against nine bacterial strains using the agar well diffusion method. The zones of inhibition of bacterial growth were determined for pyrrolidinium salts used at different concentrations and depending on the structure of the cation and anion and compared with benzalkonium chloride as a positive control.

Mitochondria-Targeted Natural Antioxidant Nanosystem for Diabetic Vascular Calcification Therapy.

The development of nanotherapy targeting mitochondria to alleviate oxidative stress is a critical therapeutic strategy for vascular calcification (VC) in diabetes. In this study, we engineered mitochondria-targeted nanodrugs (T4O@TPP/PEG-PLGA) utilizing terpinen-4-ol (T4O) as a natural antioxidant and mitochondrial protector, PEG-PLGA as the nanocarrier, and triphenylphosphine (TPP) as the mitochondrial targeting ligand. In vitro assessments demonstrated enhanced cellular uptake of T4O@TPP/PEG-PLGA, with effective mitochondrial targeting. This nanodrug successfully reduced oxidative stress induced by high glucose levels in vascular smooth muscle cells. In vivo studies showed prolonged retention of the nanomaterials in the thoracic aorta for up to 24 h. Importantly, experiments in diabetic VC models underscored the potent antioxidant properties of T4O@TPP/PEG-PLGA, as evidenced by its ability to mitigate VC and restore mitochondrial morphology. These results suggest that these nanodrugs could be a promising strategy for managing diabetic VC.

Alpha terpineol preconditioning enhances regenerative potential of mesenchymal stem cells in full thickness acid burn wounds

Regeneration of full thickness burn wounds is a significant clinical challenge. Direct stem cell transplantation at the wound site has a promising effect on wound regeneration. However, stem cell survival within the harsh wound environment is critically compromised. In this regard, preconditioning of stem cells with cytoprotective compounds can improve the efficiency of transplanted cells. This study evaluated the possible effect of alpha terpineol (αT) preconditioned mesenchymal stem cells (αT-MSCs) in full thickness acid burn wound. An optimized concentration of 10 μM αT was used for MSC preconditioning, followed by scratch assay analysis. A novel rat model of full thickness acid burn wound was developed and characterized via macroscopic and histological examinations. Treatment (normal and αT-MSCs) was given after 48 h of burn wound induction, and the healing pattern was examined till day 40. Skin tissues were harvested at the early (day 10) and late (day 40) wound healing phases and examined by histological grading, neovascularization, and gene expression profiling of healing mediators. In scratch assay, αT-MSCs exhibited enhanced cell migration and wound closure (scratch gap) compared to normal MSCs. In vivo findings revealed enhanced regeneration in the wound treated with αT-MSCs compared to normal MSCs and untreated control. Histology revealed enhanced collagen deposition with regenerated skin layers in normal MSC- and αT-MSC treated groups compared to the untreated control. These findings were correlated with enhanced expression of α-SMA as shown by immunohistochemistry. Additionally, αT-MSC group showed reduced inflammation and oxidative stress, and enhanced regeneration, as witnessed by a decrease in IL-1β, IL-6, TNF-α, and Bax and an increase in BCL-2, PRDX-4, GPX-7,SOD-1, VEGF, EGF, FGF, MMP-9, PDGF, and TGF-β gene expression levels at early and late phases, respectively. Overall findings demonstrated that αT exerts its therapeutic effect by mitigating excessive inflammation and oxidative stress while concurrently enhancing neovascularization. Thus, this study offers new perspectives on managing full thickness acid burn wounds in future clinical settings.

Exploring the Significance and Cutting-Edge Applications of Terpenes and Terpenoid-Derived Inorganic Nanoparticles

Terpenoids are a group of secondary metabolites derived from isoprene and are among the most diverse natural products responsible for crucial role in the metabolism of organisms. They are found in various forms, including terpene hydrocarbons, alcohols, aldehydes, carboxylic acids, ketones, esters, and glycosides. Terpenes have a broad range of medicinal properties and are used to prepare drugs such as artemisinin. Metallic nanoparticles that are formed by plants have garnered significant interest across various fields, including medicine, the environment, food processing, and agriculture. Using plant extracts to reduce metals is regarded as both eco-friendly and affordable and has recently gained popularity for synthesizing various classes of nanoparticles. In this study, we reviewed plant-derived terpenes (monoterpenes, sesquiterpenes, diterpenes, sesquiterpenes, triterpenes, and meroterpenes), their applications in medicine, and for the synthesis of nanoparticles. This review is relevant to researchers interested in combating bacterial infections and cancers and in using terpenoids in the synthesis of nanoparticles.

Flowback Additive for Acidizing Fluid to Stimulate Carbonate Gas Reservoirs

Summary Acidizing of oil- and gas-bearing carbonate reservoirs is generally undertaken by using strong mineral acids such as hydrochloric acid (HCl) to enhance permeability. One of the major challenges associated with HCl injection is tuning the reactivity profile to favor the transport of live acid deep into the reservoir while achieving a minimum rock face dissolution. The mineral acid is therefore emulsified in a hydrocarbon phase (e.g., diesel) to retard its reactivity with the rock matrix. The use of emulsified acid is hindered by several limitations such as low emulsion stability at high temperatures, pumping limitations due to high viscosity, the potential of formation damage, and cumbersome mixing procedures at the field scale. In addition, the brines formed as a result of this reaction can be difficult to produce due to higher density and capillary pressures, unfavorable wettability, and low formation pressure. Here, we report on the development of dual-purpose additives that were specifically designed to enhance the recovery of high-density brines and retard the acid/rock reactivity upon addition to the stimulation treatment. Accordingly, seven new additives with fluid flowback properties were developed for use in a single-phase acidizing fluid consisting of HCl (15 wt% and 28 wt%) with the required additives, such as corrosion inhibitor and intensifier, and H2S scavenger. The flowback enhancers (FBEs) were formulated from a blend of water, ester or terpene solvents, alcohols, and surfactants to form optically clear nano- and microemulsions. Surfactant selection was driven by the need to exhibit demulsification properties with condensate, high chemical and thermal stability, compatibility in strongly acidic media, and high-density brines under harsh reservoir conditions. To assess the FBE performance in acidizing formulations (i.e., to serve as both an FBE and retarder), screening studies consisting of static rock dissolution tests and surface tension measurements were performed to downselect FBEs suitable for this application. This was coupled with brine displacement tests in addition to compatibility and stability studies. FBEs that demonstrated superior performance were then selected for further evaluation under reservoir conditions [i.e., core flow matrix acidizing to measure regained permeability and computed tomography (CT) scan for analyzing the wormhole propagation]. The droplet size of the as-prepared nano- and microemulsions was found to be between 10 nm and 850 nm. The FBEs formulated in this study were found to prevent emulsion formation in the presence of condensate and demonstrated remarkable chemical and thermal stability in concentrated acid at temperatures up to 300°F for a duration of up to 24 hours, as confirmed by the consistent low surface tension values (21–29 mN/m). With regard to fluid displacement, column tests performed under ambient conditions revealed quick brine displacement with recovery exceeding 75 vol% in comparison with 16 vol% in the absence of the FBE. Interestingly, the addition of a select FBE from this study to 28 wt% HCl was found to retard the reaction of carbonate dissolution at room temperature. This led us to assess the performance under reservoir conditions utilizing core flow testing. Accordingly, the addition of FBE-F to 28 wt% HCl led to an improvement in permeability by up to 267% as compared with 15% without FBE added. These results are further supported by the CT scan images of the acidized cores, which revealed the formation of a deeper wormhole in the presence of a select FBE.

Analysis of volatile compounds and 5-hydroxymethylfurfural in fried chicken breast produced by air and deep-fat frying.

Two samples, simple-battered chicken (SBC) and normal-battered chicken (NBC), with different batters were deep-fat fried at various conditions and volatile compounds and 5-hydroxymethylfurfural (5-HMF) was analysed. The moisture content of the air-fried samples was significantly higher than that of the deep-fat fried samples in the same batter samples. A total of 72 volatile compounds (8 aldehydes, 15 monoterpenes, 12 sesquiterpenes, 2 terpene alcohols, 4 benzenes, 13 pyrazines, 2 pyridines, 6 furans, 5 alcohols, 2 pyrroles, and 3 others) were detected in fried chicken breast, and air-fried SBC possessed the highest total amount of volatile compounds. Furthermore, 5-HMF was exclusively detected in NBC samples; in particular, 1.27 ± 0.06 and 0.41 ± 0.02μg/mL were detected in deep- and air-fried NBC, respectively. This study indicates the potential of air frying to reduce the formation of 5-HMF while maintaining quality characteristics, suggesting the need for further study on other hazardous compounds.