Ternary Formulation Research Articles

Greenness and Whiteness Assessed Mathematically Filtered UV Spectroscopic Approaches for Quality Control of Amlodipine, Telmisartan and Metoprolol from Ternary Formulation

Greenness and Whiteness Assessed Mathematically Filtered UV Spectroscopic Approaches for Quality Control of Amlodipine, Telmisartan and Metoprolol from Ternary Formulation

Enhanced Dissolution of Amphotericin B through Development of Amorphous Solid Dispersions Containing Polymer and Surfactants

Amphotericin B (AmB) is the gold standard for antifungal therapy; however, its poor solubility limits its administration via intravenous infusion. A promising formulation strategy to achieve an oral formulation is the development of amorphous solid dispersions (ASDs) via spray-drying. Inclusion of surfactants into ASDs is a newer concept, yet it offers increased dissolution opportunities when combined with a polymer (HPMCAS 912). We developed both binary ASDs (AmB:HPMCAS 912 or AmB:surfactant) and ternary ASDs (AmB:HPMCAS 912:surfactant) using a variety of surfactants to determine the optimal surfactant carbon chain length and functional group for achieving maximal AmB concentration during in vitro dissolution. The ternary ASDs containing surfactants with a carbon chain length of 14 ± 2 carbons and a sulfate functional group increased the dissolution of AmB by 90-fold compared to crystalline AmB. These same surfactants, when added to a binary ASD, however, were only able to achieve up to a 40-fold increase, alluding to a potential interaction occurring between excipients or excipient and drug. This potential interaction was supported by dynamic light scattering data, in which the ternary formulation produced a single peak at 895.2 dnm. The absence of more than one peak insinuates that all three components are interacting in some way to form a single structure, which may be preventing AmB self-aggregation, thus improving the dissolution concentration of AmB.

Enhanced Solubility and Stability of Aripiprazole in Binary and Ternary Inclusion Complexes Using Hydroxy Propyl Beta Cyclodextrin (HPβCD) and L-Arginine.

The low water solubility of an active pharmaceutical ingredient (aripiprazole) is one of the most critical challenges in pharmaceutical research and development. This antipsychotic drug has an inadequate therapeutic impact because of its minimal and idiosyncratic oral bioavailability to treat schizophrenia. The main objective of this study was to improve the solubility and stability of the antipsychotic drug aripiprazole (ARP) via forming binary as well as ternary inclusion complexes with hydroxypropyl-β-cyclodextrin (HPβCD) and L-Arginine (LA) as solubility enhancers. Physical mixing and lyophilization were used in different molar ratios. The developed formulations were analyzed by saturation solubility analysis, and dissolution studies were performed using the pedal method. The formulations were characterized by FTIR, XRD, DSC, SEM, and TGA. The results showcased that the addition of HPβCD and LA inclusion complexes enhanced the stability, in contrast to the binary formulations and ternary formulations prepared by physical mixing and solvent evaporation. Ternary formulation HLY47 improved dissolution rates by six times in simulated gastric fluid (SGF). However, the effect of LA on the solubility enhancement was concentration-dependent and showed optimal enhancement at the ratio of 1:1:0.27. FTIR spectra showed the bond shifting, which confirmed the formation of new complexes. The surface morphology of complexes in SEM studies showed the rough surface of lyophilization and solvent evaporation products, while physical mixing revealed a comparatively crystalline surface. The exothermic peaks in DSC diffractograms showed diminished peaks previously observed in the diffractogram of pure drug and LA. Lyophilized ternary complexes displayed significantly enhanced thermal stability, as observed from the thermograms of TGA. In conclusion, it was observed that the preparation method and a specific drug-to-polymer and amino acid ratio are critical for achieving high drug solubility and stability. These complexes seem to be promising candidates for novel drug delivery systems development.

Evaluation of in-vitro antifungal activity against Fusarium incarnatum of binary and ternary combinations of lemongrass, garlic and mustard oil-encapsulated lipid nanoemulsions

Summary Encapsulated lipid nanoemulsions (EO-LNs) from garlic oil, lemongrass oil and mustard oil were prepared by a combined method of homogenization and sonication with the aim to generate highly effective formulations against Fusarium incarnatum (laboratory bioassays). Their combined binary and ternary formulations (preparations by mixing an equal volume ratio of each EO-LNs) were also tested. The synergistic/additive/antagonistic antifungal effect of the EOs (under nanoform) in their combined formulations was determined using the SynergyFinder software with the Bliss independence model. Results revealed the synergistic effect of the combined binary and ternary formulations of garlic oil-encapsulated LNs (NaG), lemongrass oil-encapsulated LNs (NaL) and mustard oil-encapsulated LNs (NaM). Furthermore, the ternary combination, at the same concentration of each constituent EO, had higher antifungal activity than the binary combinations. Nonetheless, at 600 times dilution the NaLG (binary combination) inhibited 96% the mycelial growth of F. incarnatum, which was significantly higher than the efficacy of NaMLG (ternary combination) in the same dilution. This could be possibly attributed to the 1.5-time higher concentration of each constituent EO in the binary combination compared to that in the ternary formulation. In addition, NaLG, even at the high EO concentration of 0.4 g/L, did not show any phytotoxicity symptoms on lettuce plants.

Promoting Tumor Accumulation of Anticancer Drugs by Hierarchical Carrying of Exogenous and Endogenous Vehicles

Promoting tumor accumulation of active pharmaceutical ingredients is crucial for targeted anticancer therapy. However, this issue has not yet been addressed because of the fast clearance or premature degradation, slow drug release kinetics, and nonspecific biodistribution of the reported formulations. Herein, a new drug delivery paradigm is proposed based on supramolecular hierarchical recognition to achieve high tumor accumulation of anticancer drugs by overcoming these three challenges. The prepared supramolecular ternary formulation of paclitaxel (PTX) contains two steps of molecular recognition: exogenous recognition of PTX by an artificial macrocyclic carrier, sulfonated azocalix[5]arene (SAC5A) in vitro, and endogenous recognition of PTX@SAC5A by intrinsic serum albumin in vivo. The ternary PTX@SAC5A⊂albumin concurrently accomplishes prolonged blood circulation, rapid drug release, and dual passive and hypoxia‐responsive targeting. As a result, the PTX@SAC5A⊂albumin formulation exhibits more efficient tumor accumulation than free PTX and albumin‐based, solvent‐based, liposome‐based, and sulfobutyl ether‐β‐cyclodextrin‐based PTX formulations, thereby contributing to better therapeutic efficacy. The current strategy paves the way for promoting the tumor accumulation of drugs, showing the advantages of simplicity, universality, and reproducibility.

Multi-intractable analysis for alternative Diesel–Ethanol–Canola methyl ester ternary blend

Biodiesel can serve as an alternative to petroleum-based fuels. It has been shown that standard biodiesel cannot be mixed to improve efficiency and emissions characteristics. It has a major effect on emissions but has a limited capacity to mix with co-feed at varying temperatures and different ratios. In this study, 63 tertiary blends and three binary blends were mixed to create a stable fuel. Biodiesel was stable after having blended with amphipathioic liquor of a broad range of compatibility for a period of 168 h is recorded. Four samples were chosen for reproducibility, and 2 were selected for higher than average ethanol content in ethanol. These can be defined as one-observed, inferred, and derived in the three-layer, double-blurred, double-layer, two-blurred, one-blurred ring formation, and a single-blurred double-layer format. Even at 27.2 °C, biodiesel micelles could not shape micelles were used. The fuel blend, which has a wider range of miscibility, suitable for transportation and stability, causes more aromatic emissions when used in a ternary formulation than a micro formulation. The blend properties were found to be within tolerable limits.

Integrated computer-aided formulation design: A case study of andrographolide/ cyclodextrin ternary formulation

Current formulation development strongly relies on trial-and-error experiments in the laboratory by pharmaceutical scientists, which is time-consuming, high cost and waste materials. This research aims to integrate various computational tools, including machine learning, molecular dynamic simulation and physiologically based absorption modeling (PBAM), to enhance andrographolide (AG) /cyclodextrins (CDs) formulation design. The lightGBM prediction model we built before was utilized to predict AG/CDs inclusion's binding free energy. AG/γ-CD inclusion complexes showed the strongest binding affinity, which was experimentally validated by the phase solubility study. The molecular dynamic simulation was used to investigate the inclusion mechanism between AG and γ-CD, which was experimentally characterized by DSC, FTIR and NMR techniques. PBAM was applied to simulate the in vivo behavior of the formulations, which were validated by cell and animal experiments. Cell experiments revealed that the presence of D-α-Tocopherol polyethylene glycol succinate (TPGS) significantly increased the intracellular uptake of AG in MDCK-MDR1 cells and the absorptive transport of AG in MDCK-MDR1 monolayers. The relative bioavailability of the AG-CD-TPGS ternary system in rats was increased to 2.6-fold and 1.59-fold compared with crude AG and commercial dropping pills, respectively. In conclusion, this is the first time to integrate various computational tools to develop a new AG-CD-TPGS ternary formulation with significant improvement of aqueous solubility, dissolution rate and bioavailability. The integrated computational tool is a novel and robust methodology to facilitate pharmaceutical formulation design.

Ternary Amorphous Solid Dispersions Containing a High-Viscosity Polymer and Mesoporous Silica Enhance Dissolution Performance†.

The aim of this study was to evaluate the benefits of a ternary amorphous solid dispersion (ASD) that was designed as an immediate-release tablet with a high drug load (e.g., 40% w/w) to produce heightened maintenance of drug supersaturation during dissolution testing, which will be henceforth referred to as the "maintenance ability". Ternary ASD granules were produced by hot melt extrusion (HME) and were comprised of itraconazole (ITZ) 50%, hypromellose (HPMC) 20%, and mesoporous silica (XDP) 30%, where amorphous ITZ incorporated into HPMC was efficiently absorbed in XDP pores. The ternary ASD granules containing a high-viscosity HPMC (AF4M) produced a significantly heightened maintenance ability of drug supersaturation in neutral pH dissolution media in which crystalline ITZ solubility is below 1 μg/mL. The final tablet formulation contained 80% w/w of the ASD granules (40% w/w ITZ), had an acceptable size, and exhibited both sufficient tablet hardness and disintegration. The dissolution behavior of the ternary ASD tablet exhibited a supersaturation maintenance ability similar to that of the ASD granules. Under neutral conditions, the ternary ASD tablet showed immediate and higher ITZ release compared with the binary ASD tablets, and this phenomenon could be explained by the difference in ITZ/AF4M particle size in the tablet. In high-resolution scanning electron microscopy (SEM), it was observed that ITZ and AF4M in the ternary formulation could easily form nano-sized particles (<1 μm) during the absorption process into/onto XDP pores prepared by HME, which contributed to the immediate ITZ release from the ternary ASD tablet under neutral pH conditions. Therefore, the ternary ASD containing high-viscosity HPMC and mesoporous silica prepared by HME made it possible to design a high ASD content, small-size tablet with an ideal dissolution profile in biorelevant media, and we expect that this technology can be applied for continuous HME ASD manufacturing.

Development of a Highly Water-Soluble Lycopene Cyclodextrin Ternary Formulation by the Integrated Experimental and Modeling Techniques.

Lycopene, the aliphatic hydrocarbon carotenoid with abundant bioactivities, has instability, extremely poor water solubility, and low oral bioavailability. The study aimed to develop a highly water-soluble and practical lycopene formulation to improve the oral bioavailability and efficiency of lycopene. Environment-friendly hot-melt extrusion (HME) technique was applied to fabricate lycopene-cyclodextrin-polyethylene glycol 6000 (PEG 6000) ternary systems, which possessed highly aqueous solubility (897.665μgmL-1), almost 32-fold higher than that of the reported lycopene binary inclusion (27.1 ± 3.2μgmL-1). The dissolution rate was significantly accelerated compared to pure lycopene. The molecular mechanism was further investigated by the integrated experimental and modeling tools. Molecular dynamics (MD) simulation revealed lycopene molecule was wrapped within the aggregates of hydroxypropyl-beta-cyclodextrin (HP-β-CD) and PEG 6000 through extensive hydrogen bond interactions, which was experimentally validated by DSC, XRD, and FTIR spectrum analysis. The third component PEG 6000 facilitated the process of HME and augmented hydrogen bond interactions with HP-β-CD. Moreover, lycopene inclusions exhibited significant antitumor activity via inhibiting cell proliferation and inducing apoptosis. The pharmacokinetic studies showed the relative bioavailability of lycopene ternary preparation was up to 313.08% and the Cmax was 4.9-fold higher than that of the marketed tablet. In conclusion, the lycopene cyclodextrin ternary formulation developed by the modified HME techniques is suitable for industrial production, while PEG 6000 plays a vital part in the multicomponent systems to increase solubility, dissolution rate, and oral bioavailability of lycopene. The combination of experimental and computational tools is able to benefit the development of multicomponent formulations accurately and effectively.

Microcrystalline cellulose as an effective crystal growth inhibitor for the ternary Ibrutinib formulation.

The objective of present study is to explore whether polysaccharide could be a crystal growth inhibitor in poorly soluble antitumor drug Ibrutinib (IBR) formulation. In this work, small molecular ligands (amino or organic acids) in co-amorphous system (CAS) were preliminarily screened. A polysaccharide, microcrystalline cellulose (MCC) was selected to stabilize amorphous drug and enhance pharmacokinetic properties. Fourier-transform infrared, Raman, and X-ray photoelectron spectroscopy confirmed the ionic interaction of the ternary IBR formulation. Moreover, the biosafety of the ternary formulation was the same as that of IBR while the in vitro performance advantage of the ternary formulation was converted into higher bioavailability in vivo experiments. Overall, MCC as an effective crystal growth inhibitor in the novel ternary IBR formulation is a promising approach to improve the dissolution rate of crystalline drugs and the stability of amorphous drugs, as well as providing a theoretical basis for clinical applications.

Supersaturating drug delivery system of fixed drug combination: sulfamethoxazole and trimethoprim

ABSTRACTBackground: The drug supersaturation in the intestinal lumen for few hours could result in high bioavailability. The goal of this study was the development of a supersaturating drug delivery system containing sulfamethoxazole and trimethoprim at fixed dose combination (sulfamethoxazole:trimethoprim 5:1 w/w).Methods: The amorphous solid dispersions were formed at three different proportions containing 30, 50 and 70% of Eudragit EPO in the formulation.Results: The supersaturation state is formed by the amorphous drugs produced by spray drying technique, and the maintenance of this state is due to the chemical interactions between the drugs and the polymer selected, which was observed in the fluorescence interaction studies realized between the drugs and the polymer. The Formulation containing 70% of the polymer was able to produce and maintain the supersaturated state of both drugs for 24 h. Solid state characterization demonstrated the amorphization of the drugs in the solid dispersion and indicated the hydrogen bond formation responsible for the improvement in the apparent solubility. This formulation presented an improved antibacterial activity when compared to the combination of the drugs.Conclusion: For the first time, a supersaturating drug delivery system was developed to the complementary antibacterial drugs. This ternary formulation is a powerful alternative to improve oral absorption of recognized safety drugs, reducing the dose and consequently the antibiotic resistance emergence.

Spray-Dried Amorphous Solid Dispersions of Atorvastatin Calcium for Improved Supersaturation and Oral Bioavailability.

Over the past few decades, the amorphous solid dispersions (ASDs) technique has emerged as a promising strategy to enhance the in vitro/in vivo characteristic of hydrophobic drugs. The low aqueous solubility and poor bioavailability of atorvastatin calcium (ATO), a lipid-lowering drug, present challenges for effective drug delivery. The objective of this work was to improve the aqueous solubility, in vitro dissolution, and oral absorption of ATO with amorphous solid dispersion technique prepared by spray-drying method. The optimized ternary formulation comprising of ATO; hydroxypropyl methylcellulose (HPMC), as a hydrophilic polymer; and sodium lauryl sulfate (SLS), as a surfactant, at a weight ratio of 1/1/0.1, showed significant improvement in aqueous solubility by ~18-fold compared to that of the free drug, and a cumulative release of 94.09% compared to a release of 59.32% of the free drug. Further, physicochemical studies via scanning electron microscopy, differential scanning calorimetry, and powder X-ray diffraction revealed a change from the crystalline state of the free drug to its amorphous state in the ASD. Pharmacokinetic analysis in rats demonstrated 1.68- and 2.39-fold increments in AUC and Cmax, respectively, in the ASD over the free drug. Altogether, hydrophilic carrier-based ASDs prepared by the spray-drying technique represent a promising strategy to improve the biopharmaceutical performance of poorly soluble drugs.

Effects of the antibiotic component on in-vitro bacterial killing, physico-chemical properties, aerosolization and dissolution of a ternary-combinational inhalation powder formulation of antibiotics for pan-drug resistant Gram-negative lung infections

Combinational antibiotic formulations have emerged as an important strategy to combat antibiotic resistance. The main objective of this study was to examine effects of individual components on the antimicrobial activity, physico-chemical properties, aerosolization and dissolution of powder aerosol formulations when three synergistic drugs were co-spray dried. A ternary dry powder formulation consisting of meropenem (75.5 %w/w), colistin (15.1 %w/w) and rifampicin (9.4 %w/w) at the selected ratio was produced by spray drying. The ternary formulation was characterized for in-vitro antibacterial activity, physico-chemical properties, surface composition, aerosol performance and dissolution. All of the formulations demonstrated excellent aerosolization behavior achieving a fine particle fraction of >70%, which was substantially higher than those for the Meropenem-SD and Colistin-Meropenem formulations. The results indicated that rifampicin controlled the surface morphology of the ternary and binary combination formulations resulting in the formation of highly corrugated particles. Advanced characterization of surface composition by XPS supported the hypothesis that rifampicin was enriched on the surface of the combination powder formulations. All spray-dried formulations were amorphous and absorbed substantial amount of water at the elevated humidity. Storage at the elevated humidity caused a substantial decline in aerosolization performance for the Meropenem-SD and Colistin-Meropenem, which was attributed to increased inter-particulate capillary forces or particle fusion. In contrast, the ternary combination and binary Meropenem-Rifampicin formulations showed no change in aerosol performance at the elevated storage humidity conditions; attributable to the enriched hydrophobicity of rifampicin on the particle surface that acted as a barrier against moisture condensation and particle fusion. Interestingly, in the ternary formulation rifampicin enrichment on the surface did not interfere with the dissolution of other two components (i.e. meropenem and colistin). Our study provides an insight on the impact of each component on the performance of co-spray dried combinational formulations.

Nanostructured starch combined with hydroxytyrosol in poly(vinyl alcohol) based ternary films as active packaging system

Novel ternary films have been realized by using poly(vinyl alcohol) (PVA) as polymeric matrix, nanostructured starch as reinforcement phase and hydroxytyrosol (HTyr), a low-molecular phenolic compound present in olive oil, as antioxidant agent. Nanostructured starch, in the form of starch nanocrystals (NC) and nanoparticles (NP) obtained by acid hydrolysis and ultrasound irradiation of starch derived from the bread wheat variety Cadenza (WT, amylose content 33%) and a derived-high amylose line (HA, amylose content 75%), was considered. The developed multifunctional films were characterized in terms of morphological, thermal and optical properties, water absorption capacity, overall and specific migration into a food simulant and antioxidant properties.Experimental data showed a prolonged release of HTyr from all ternary films and the released HTyr retained a strong antioxidant activity. The data, compared to those of PVA/HTyr binary films, demonstrated the key role of nanostructured starch in the ternary formulations in promoting a gradual release of HTyr. Overall, PVA fillm combined with nanoparticles from low amylose starch and hydroxytyrosol resulted as the most promising ternary formulation for food packaging applications.

Enhanced Dissolution of a Porous Carrier–Containing Ternary Amorphous Solid Dispersion System Prepared by a Hot Melt Method

The focus of our study was to employ a solvent-free, thermal process to evaluate the use of a porous carrier in a drug-polymer-porous carrier ternary formulation containing a high drug load (e.g., ≥50% w/w). The purpose of the study was to improve the dissolution properties of the biopharmaceutical classification system class II drug, indomethacin, in the ternary formulation. The effect that the selected polymer has on properties of the formulation was studied, and the formulation characteristics of hypromellose (AF15), copovidone (VA64), and polyvinyl alcohol-polyethylene glycol graft copolymer was evaluated to understand differences in dissolution rates and drug adsorption onto the porous carrier. The ternary formulations were manufactured using a thermal technique that relied on heating and mixing, without the necessity of mechanical shear. All thermally processed granules that employed the porous carrier exhibited immediate release compared with crystalline indomethacin and physical mixtures. In addition, the ternary formulations maintained supersaturation compared with the binary formulations without polymer. The results of this study indicated that the thermally processed ternary formulations containing a porous carrier demonstrated a much improved dissolution profile in nonsink conditions.

Probing the Cleaning of Polymeric Coatings by Nanostructured Fluids: A QCM-D Study.

Complex fluids composed of water, an organic solvent, and a surfactant have been recently employed as cleaning systems to remove hydrophobic materials, such as polymeric coatings, from solid surfaces. The simultaneous presence of surfactants and an organic solvent with good affinity for the polymer was proven necessary for the polymer's removal, but the comprehension of the cleaning mechanism is poorly understood. In this Article, we investigated the mechanism of removal, highlighting the specific role of each component in the interaction with the polymer film. In particular, the results from quartz crystal microbalance with dissipation monitoring (QCM-D) were compared with those obtained by using confocal microscopy to follow in situ the effect of a nanostructured fluid, i.e., a ternary formulation containing water, 2-butanone (MEK) as a good solvent for the polymer, and a nonionic surfactant (C9-11 ethoxylated alcohol, BR) on acrylic copolymer films (Paraloid B72). The results indicate a two-step process: (i) the penetration of the good solvent across the film causes the swelling of the polymer, the weakening of polymer-polymer interactions, and an increase of molecular mobility, followed by (ii) the slow adsorption of amphiphilic aggregates promoting the film detachment from the solid substrate. A different behavior is observed in the presence of similar formulations containing an anionic surfactant (sodium dodecyl sulfate, SDS), where the adsorption of SDS micelles on the surface of the polymeric film hinders solvent access into the polymer layer, rather than promoting its detachment from the solid substrate.

Improved Solubility and Dissolution Rate of Ketoprofen by Beta Cyclodextrin Ternary Complexes Incorporating Hydrophilic Polymers

The aim of the presentstudy wasto improve the aqueous solubility and dissolution rate of a BCS Class-IIdrug,ketoprofen by β-cyclodextrin ternary complexes incorporating hydrophilic polymers polyethylene glycol 6000 (PEG6000) and polyvinyl pyrrolidone (PVP). Initially,ketoprofen (KPF)binary complexes with β-Cyclodextrin (βCD)wereformulated by physical mixing,co-grinding, and solvent evaporation methods which was followed by ternary complex formulation of selected KPF-βCD binary complex incorporatingPEG6000 and PVP.The solvent evaporation method was used in the formulation of ternary complexesof ketoprofen, sincein the beginning of this study, it was proved to be the best methodcomparatively in yielding promising binary complexes of ketoprofen.Ketoprofen formed 1:1 M stoichiometric binary and ternary inclusion complexes as demonstrated by the AL-type of phase solubility graph. An increase in the stability constant value (Kc) of KPF- βCD complex in the presence of PEG6000 and PVP conceded higher complexation competency. FTIR and SEM studies evidenced the perfect ternary inclusion complex formation. Ternary complexes showed improved drug dissolution compared with Ketoprofenalone and KPF-βCD binary complex. The ternary complex containg 1:1:2 molar ratio of KPF:βCD:PEG6000exhibited 94.24% drug dissolution in 2 hours, which was significantly high in relation to ternary complexes containg PVPand it was found to follow first order release mechanism. Complex studied for stabilityshowed no significant change in physical appearance, drug content and drug dissolution characteristic indicating high stability.

Smart nanopaper based on cellulose nanofibers with hybrid PEDOT:PSS/polypyrrole for energy storage devices

In the current work, flexible, lightweight, and strong conductive nanopapers based on cellulose nanofibers (CNFs) with poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and/or polypyrrole (PPy) were prepared by following a mixing and in situ chemical polymerization method. A successful homogeneous coating of PEDOT:PSS on cellulose nanofibers occurred by means hydrogen-bonding interactions between the hydroxyl functionalized CNF and the electronically charged PEDOT:PSS, as shown by FTIR spectra. The electrical conductivity and the specific capacitance of CNF-PEDOT:PSS nanopapers were 2.58Scm−1 and 6.21Fg−1, respectively. Further coating of PPy produced a substantial improvement on the electrical conductivity (10.55Scm−1) and the specific capacitance (315.5Fg−1) of the resulting CNF-PEDOT:PSS-PPy nanopaper. A synergistic phenomenon between both conductive polymers supported the high electrical conductivity and specific capacitance of the ternary formulation. Moreover, CNF-PEDOT:PSS-PPy nanopaper showed higher mechanical properties and it was more flexible than the nanopaper containing only polypyrrole conducting polymer (CNF-PPy). It is concluded that the good mechanical, electrical and electrochemical properties of the ternary formulation can apply for smart nanopaper in flexible electronics and energy storage devices.

Genetic pharmacology: progresses in siRNA delivery and therapeutic applications.

In the RNA interference process, the catalytic degradation of an endogenous mRNA results from the Watson-Crick complementary recognition by either a small silencing synthetic double-stranded ribonucleotide (siRNA) or by a small hairpin RNA (shRNA) produced in the cell by transcription from a DNA template. This interference process ideally results in an exquisitely specific mRNA suppression. The present review is dedicated to siRNAs. It describes the mechanism of RNA silencing and the main siRNA delivery techniques, with a focus on siRNA self-complexing to cationic lipids to form nanoparticles, which are called lipoplexes. The addition to lipoplexes of an anionic polymer leads to the ternary formulation APIRL (Anionic-Polymer-Interfering-RNA-Lipoplexes) with increased in vivo stability and biological efficacy. In terms of clinical development, the review focuses on therapeutic applications by intravenous delivery to the liver and inflammatory joints, and to localized siRNA delivery to the ocular sphere.

Mixed Micelle System Produced by Interaction Between Transglycosylated Stevia and an Ionic Surfactant Improves Dissolution Profile of Mefenamic Acid

Transglycosylated stevia (stevia-G) can effectively improve the dissolution and bioavailability of poorly water-soluble drugs. Furthermore, addition of an ionic surfactant to stevia-G solution has been shown to enhance the dissolution effect of stevia-G on flurbiprofen. Herein, 4 surfactants, namely sodium dodecyl sulfate, sodium N-dodecanoylsarcosinate, sodium monododecyl phosphate, and lauryltrimethylammonium chloride (LTAC) were screened to investigate their synergistic effect with stevia-G in enhancing the solubility of mefenamic acid (MFA). The ternary formulation containing LTAC produced the highest increase in solubility, whereas the binary MFA/LTAC formulation did not increase the solubility of MFA. Surface tension was evaluated to analyze the interaction between stevia-G and each ionic surfactant, wherein the Rubingh model was applied to predict mixed micelle formation between stevia-G and LTAC. Interaction parameters calculated by the Rubingh model reflected mixed micelle formation between stevia-G and LTAC relative to the self-interactions of the 2 individual surfactants. All interaction parameters in this system showed negative values, indicating a favorable interaction (e.g., hydrogen bond or electrostatic and dipole) between binary components in the mixed micelles. Spray-dried particles of ternary formulations (MFA/stevia-G/LTAC) were prepared to evaluate the dissolution profile and physicochemical properties. Dissolution profiling showed that the concentration of MFA released from spray-dried particles was significantly higher than untreated MFA.