Terahertz Plasmon-induced Transparency Research Articles

Dynamically Tunable Terahertz Plasmon-Induced Transparency Analogy Based on Asymmetric Graphene Resonator Arrays

Dynamically Tunable Terahertz Plasmon-Induced Transparency Analogy Based on Asymmetric Graphene Resonator Arrays

Tunable Terahertz Plasmon-Induced Transparency in Resonator-Coupled Dirac Semimetal Waveguides

The bulk Dirac semimetal (BDS) is an interesting material, similar to graphene, which can dynamically adjust its optical properties via a variation in its Fermi energy or electrical voltage. In this work, a BDS-based plasmonic device, which enables tunable terahertz plasmon-induced transparency, was proposed and designed. By using the finite element method, the surface plasmon polariton and plasmon-induced transparency of this device were systematically investigated. The results demonstrate that the plasmon-induced transparency of such device can be dynamically tuned by varying its Fermi energy. When the Fermi energy changes from 55 meV to 95 meV, the maximum group delay time of the device increases from 13.2 ps to 21 ps. In the case of a cascading device, the maximum group delay time can be further pushed up to 44.57 ps. The influence of the ambient refractive index on the optical properties of the proposed device was also considered and investigated.

Mechanical control of terahertz plasmon-induced transparency in single/double-layer stretchable metamaterial

Active control of metamaterial properties in stretchable devices is crucial for advanced terahertz (THz) applications, involving large mechanical deformation or stretching. Single/double-layer mechanically tunable THz metamaterial devices based on the polymer polydimethylsiloxane are proposed and experimentally studied herein. The plasmon-induced transparency (PIT) effect is observed in the transmittance spectrum of the single-layer metamaterial, originating from the near-field coupling of two bright modes. Similarly, a bright-dark-coupled PIT system is obtained in the double-layer metamaterial. Furthermore, an external mechanical stretching could exert a switch effect on the sample. The PIT resonances of the single/double-layer metamaterials disappear when the stretching ratio is further increased, as the increased distance between the resonators blocks the coupling effect. The proposed design enriches the approaches to the modulation of the sensitive PIT effect and broadens the applications of stretchable THz equipment.

Optical control of terahertz plasmon-induced transparency based on hybrid CsPbBr3 quantum dot metasurfaces.

Incorporating photosensitive material into structured metamaterials explores opportunities for dynamical operation across the terahertz functional devices, enabled by the efficient interaction between light and matter. In this work, the CsPbBr3 quantum dots are incorporated into the metasurfaces, realizing the active control of the plasmon-induced transparency. In the experiment, the normalized modulation depth of transparency effect is up to 74%. Rigorous numerical and theoretical simulations verify that the variation of dynamic physical process is associated with the charge storage capacity in the capacitive metasurface. An observed phase advance and group delay indicate the hybrid metasurface is useful for slow light application. In addition, the simple process provides a convenient way for the development of terahertz functional devices.

Coherently controllable terahertz plasmon-induced transparency using a coupled Fano-Lorentzian metasurface.

Metamaterials have been engineered to achieve electromagnetically induced transparency (EIT)-like behavior, analogous to those in quantum optical systems. These meta-devices are opening new paradigms in terahertz communication, ultra-sensitive sensing and EIT-like anti-reflection. The controlled coupling between a sub-radiant and a super-radiant particle in the unit cells of these metamaterial can enable multiple narrow plasmon induced transparency (PIT) windows over a broad band, with considerable group delay of electromagnetic field (slow light effect). Phase coherence between these PIT windows is highly desired for next-generation multichannel communication network. Herein, we numerically and experimentally validate a controllable frequency hopping mechanism between "slow light" windows in the terahertz (THz) regime. The effective media are composed of plasmonic "molecules" in which an asymmetric split-ring resonator (ASRR) or Fano resonator is displaced on the side of a cut-wire (Lorentz oscillator). Two metasurfaces where ASRR is on opposite side of the cut-wire are investigated. In these two cases, the proximity of the cut-wire to the gap on the ASRR having asymmetry is different. On one side, when the gap is nearer to the cut wire, displacing the ASRR along the cut-wire, produces only one narrow transparency window at 0.8 THz, corresponding to 20 ps group delay. When the ASRR is positioned on the opposite side, such that the gap is further, two transparency windows are observed when the ASRR is displaced along the cut-wire. That is, the transparency window hops from 0.8 THz to 1.2 THz. This corresponds to an increase from 20 to 30 ps in slow light effect. Numerical simulations suggest these single or multiple PIT windows occur if the couplings between the plasmonic modes in the different arrangements are either in-phase or out-of-phase, respectively.

Demonstration of group delay above 40 ps at terahertz plasmon-induced transparency windows.

Herein, we demonstrate one of the highest terahertz group delay of 42.4 ps achieved experimentally at 0.23 THz, on a flexible planar metamaterial. The unit cell of metasurface is made up of a textured closed cavity and another experimentally concentric metallic arc. By tuning the central angle of the metallic arc, its intrinsic dipolar mode is in destructive interference with the spoof localized surface plasmon (SLSP) on textured closed cavity, which results in a plasmon-induced transparency phenomenon. The measured transmittances of as-fabricated samples using terahertz-time domain spectroscopy validate numerical results using extended coupled Lorentz oscillator model. It is found that the coupling coefficient and damping ratio of SLSP relies on the radius of the ring structure of textured closed cavity. As a consequence, the slow light maximum values become manoeuverable in strength at certain frequencies of induced transparency windows. To the best of our knowledge, our experimental result is currently the highest value demonstrated so far within metasurface at terahertz band.

Terahertz plasmon-induced transparency and absorption in compact graphene-based coupled nanoribbons

We investigate theoretically and numerically the possibility of realizing plasmon-induced transparency (PIT) and plasmon-induced absorption (PIA) in a novel compact graphene-based nanostructure. The main graphene bus waveguide is coupled to two graphene nanoribbons (GNRs). The PIT effect is obtained by setting the two GNRs in an inverted L-shape aside of the main waveguide, giving rise to lambda-like configuration in analogy with three atomic-level systems. The possibility of improving the quality factors of PIT-like resonances is shown and the associated slow light effects are showcased. The mechanism behind the observed transparency windows is related to mode splitting also known as Autler–Townes splitting phenomenon. Two PIA resonances are also demonstrated by the same system. This is achieved by inserting the two GNRs, forming an inverted T-shape, inside the main waveguide. Here the two GNRs are also set in a lambda-like configuration. We indicate the possibility of improving the Q-factor of the PIA resonances and showcase their fast light features. The PIA absorption bands are shown to be essentially caused by interference phenomena between three states as in electromagnetic-induced transparency. The proposed system may help the design of tunable integrated optical devices such as sensors, filters or high speed switches.

Absorption and slow-light analysis based on tunable plasmon-induced transparency in patterned graphene metamaterial.

We propose a novel simple patterned monolayer graphene metamaterial structure based on tunable terahertz plasmon-induced transparency (PIT). Destructive interference in this structure causes pronounced PIT phenomenon, and the PIT response can be dynamically controlled by voltage since the existence of continuous graphene bands in the structural design. The theoretical transmission of this structure is calculated by coupled mode theory (CMT), and the results are highly consistent with the simulation curve. After that, the influence of the graphene mobility on the PIT response and absorption characteristics is researched. It is found that the absorption efficiency of our designed structure can reach up to 50%, meaning the structure is competent to prominent terahertz absorber. Moreover, the slow-light performance of this structure is discussed via analyzing the group refractive index and phase shift. It shows that the structure possesses a broad group refractive index band with ultra-high value, and the value is up to 382. This work will diversify the designs for versatile tunable terahertz devices and micro-nano slow-light devices.

Terahertz plasmon-induced transparency based on asymmetric dual-disk resonators coupled to a semiconductor InSb waveguide and its biosensor application

An ultracompact double eight-shaped plasmonic structure for the realization of plasmon-induced transparency (PIT) in the terahertz (THz) region has been studied. The device consists of a semiconductor–insulator–semiconductor bus waveguide coupled to the dual-disk resonators. Indium antimonide is employed to excite SPP in the THz region. The transmission characteristics of the proposed device are simulated numerically by the finite-difference time-domain method. In addition, a theoretical analysis based on the coupled-mode theory for transmission features is presented and compared with the numerical results. Results are in good agreement. Also, the dependence of PIT frequency characteristics on the radius of the outer disk is discussed in detail. In addition, by removing one of the outer disk resonators, double-PIT peaks can be observed in the transmission spectrum, and the physical mechanism of the appeared peaks is investigated. Finally, an application of the proposed structure for distinguishing different states of DNA molecules is discussed. Results show that the maximum sensitivity with 654 GHz/RIU−1 could be obtained for a single PIT structure. The frequency shifts equal to 37 and 99 GHz could be observed for the denatured and the hybridized DNA states, respectively.

Tunable terahertz plasmon-induced transparency with aperture-side-coupled disk resonators

An analog of electromagnetically induced transparency (EIT) in plasmonic double disk resonators aperture-side-coupled to an InSb bus waveguide at the terahertz (THz) frequency region has been investigated. When there is a destructive interference coupling between these two disk resonators, the proposed plasmonic structure exhibits a transparency window. The simulation results show that the EIT-like response is dependent on the coupling distance between two disk resonators. Since the permittivity of InSb is modified by varying temperature, the central wavelength of the EIT-like transmission can be controlled by tuning the temperature. The proposed plasmonic structure may have applications in THz integrated circuits.

Graphene-based tunable terahertz plasmon-induced transparency metamaterial.

A novel terahertz plasmon induced transparency (PIT) metamaterial structure consisting of single-layered graphene microstructures was proposed and numerically studied in this study. A pronounced transparency peak was obtained in the transmission spectrum, which resulted from the destructive interference between the graphene dipole and monopole antennas. Further investigations have shown that the spectral location and lineshape of the transparency peak can be dynamically controlled by tuning the Fermi level in graphene. Since the monopole antennas in our designed structure exist in a continuous form, a more convenient method for tunablity is available by applying a gate voltage compared to those structures with discrete graphene patterns. This work may open up new avenues for designing tunable terahertz functional devices and slow light devices.

A polarization-independent terahertz plasmon-induced transparency metamaterial based on hybrid graphene-gold structure for bio-sensing

A polarization-independent terahertz metamaterial based on hybrid graphene-gold structure with excellent refractive index sensing characteristics is proposed. The proposed structure exhibits a sharply narrow plasmon-induced transparency peak in the transmission spectrum at the terahertz regime. Obvious frequency shift in the transparency peak can be observed by varying the surrounding medium’s refractive index or the Fermi level in graphene, which can be well applied in bio-sensing technology. Moreover, an electrical RLC circuit model is used to provide a reasonable explanation for the optical response process in the proposed structure. Our work can offer reference value for the application of graphene technology as well as new idea for designing novel biosensors.

Tunable subwavelength terahertz plasmon-induced transparency in the InSb slot waveguide side-coupled with two stub resonators

We numerically investigated the realization of electromagnetically induced transparency (EIT) at the terahertz (THz) region in an InSb slot waveguide side-coupled with two stub resonators. The mechanism of the EIT phenomenon is theoretically analyzed and numerically studied by using coupled mode theory and the finite element method, respectively, and the theoretical results are in good agreement with the simulation results. The simulation results reveal that the EIT-like response is strongly dependent on the coupling separation between the two stub resonators, and we derived the best separation between the two stub resonators to get the most obvious EIT-like spectra. More importantly, the central wavelength of the EIT-like spectra can be actively controlled by tuning the temperature. This plasmonic waveguide system may have potential applications for ultracompact THz integrated circuits, such as thermo-tunable filters, THz switching, slow-light components, and THz sensitive sensors.