Tennessee Eastman Company Research Articles

The Secret History of RDX: The Super-Explosive That Helped Win World War II by Colin F. Baxter

Reviewed by: The Secret History of RDX: The Super-Explosive That Helped Win World War II by Colin F. Baxter Rich Hamerla (bio) The Secret History of RDX: The Super-Explosive That Helped Win World War II. By Colin F. Baxter. Lexington: University Press of Kentucky, 2018. Pp. x+204. $45. In The Secret History of RDX: The Super-Explosive That Helped Win World War II, Colin F. Baxter presents the story of the development of RDX (Research Department Explosive), which begins at the Woolrich Arsenal in London in 1941. Baxter hopes this study will contribute to the “History from the Middle” of the Second World War, as opposed to the usual accounts that focus on activity at the top (leadership and campaigns), or the bottom (small-unit histories and solider/sailor biographies). The story takes us from London to Canada and, most importantly, to the Holston Ordinance Works near Kingsport, Tennessee, United States. The British, looking to procure a more powerful explosive for the war, achieved this by working with its own scientists and military personnel and with her allies in Canada and the United States. While initially developed to replace older explosives used in bombs—Amatol—which made up approximately 30 percent of the munitions’ weight when an equivalent German bomb was 50 percent explosive by weight, RDX and its spinoffs were, the author argues, on par with more familiar technologies that helped in the war for the Allies. RDX-based products such as Composition B2 and C-4 were used in a variety of applications, including the biggest non-nuclear air-dropped bombs during the war: the 14,000 pound Tallboys and the 22,000 pound Grand Slams. Torpex, another RDX byproduct, was a crucial ingredient used in confronting the U-Boat threat to Great Britain. Baxter commits an entire chapter to this subject, which is arguably the best in the book. Baxter emphasizes familiar themes in the history of the relationships between governments, modern militaries, science, and technology. For example, all Allied militaries were skeptical of civilian scientists’ ability to understand military needs, which was coupled with a military culture characterized by a pervasive anxiety over secrecy. This caused friction between various ordinance personnel, government research committees, and civilian-dominated councils. In the end, though, relationships smoothed and the Tennessee Eastman Company was hired to develop RDX production processes, which it did on a massive scale, from a production output of 60 tons a week by British manufacturing in 1941 to 340 tons per day in the United States by the end of the war. While an interesting and useful book from a scholarly perspective, The Secret History of RDX also includes several anecdotes that many military veterans will find familiar and amusing, this reviewer included. One occurred in 1944 when bomber crews were taken in by a rumor begun by senior [End Page 366] officers concerned over mishandling the new RDX-based munitions. This led young bomber crews to believe that Composition B2 (RDX) bombs were exceptionally fragile and prone to exploding if handled too roughly. On one particularly turbulent mission to Germany on 20 April, the nervous bombardiers dumped 2,472 of 6,344 bombs into the English Channel rather than risk delivering them to their targets. Based on this and similar incidents, ordnance officers and crews were then told to disregard information that suggested RDX bombs required special, delicate handling. The outcome of this change-in-message resulted in a predictable fiasco just a few months later when, on 15 July, a detail of American airmen found themselves delivering a load of 500-pound bombs to an ammo dump in Suffolk, England on a Saturday night. The young men, sure the munitions were safe and anxious to complete their work before a night on the town, disregarded standard unloading procedures. The driver of one of the trucks put the vehicle in reverse, gunned the engine and slammed on the breaks, jettisoning the cargo onto the tarmac. The crew was successful in quickly unloading the bombs, but in doing so, 12,000 tons of RDX-based explosives went off, killing five airmen in an explosion that could be heard miles away. Generally, then, this...

IRI Achievement Award Address: Discovery of Superglue Shows Power of Pursuing the Unexplained

OVERVIEW:Cyanoacrylates are a unique chemical species that today is having a significant impact on a wide range of consumer and industrial applications, as well as promising to answer the surgeon's dream of a tissue adhesive and hemostatic agent for a wide range of surgical procedures. Its astonishing adhesive properties were discovered in 1951 when a ruined instrument in the research laboratories of the then Tennessee Eastman Company led to a flash of insight followed by inevitable years of innovation. The discovery serves as yet another reminder to be open-minded and curious enough to pursue unexplained results that may unlock new secrets and lead to future exciting discoveries.

Validation of physical ability tests for high pressure cleaning occupations

This paper describes the development and validation of a physical performance test battery to select high pressure cleaning workers at Tennessee Eastman Company. The research uses a concurrent, criterion-related validation strategy to demonstrate the relationship between test performance and job performance. The study proceeded through four stages, with data collected in one stage used in subsequent stages. The two types of predictor measures included ability tests and work sample simulations. For some analyses, the work sample simulations were also used as criteria. Four samples of incumbents (N=63) were tested on all experimental measures. Using criterion groups of successful incumbents and unsuccessful former incumbents (N=33), all of the work simulation tests and the ability-referenced tests were significant predictors of successful versus unsuccessful job status. In addition, the ability tests predicted performance on the work sample simulations, particularly for those requiring strength and endurance. A battery of three ability tests resulted in R=.68 for job status and in R=.43, .73, .80, and .84, respectively, for each of the work sample simulations. Two of the three ability tests in the final test battery are likely to result in adverse impact against females. However, data collected on female maintenance technicians indicated women, as a group, would not be screened out categorically as a result of implementing the physical ability test battery.

Certifying the Adequacy of Data Trails and Controls at Tennessee Eastman Company

Click to increase image sizeClick to decrease image size Additional informationNotes on contributorsLeroy CleekLeroy Cleek, CIA, is the manager of internal auditing of Tennessee Eastman, Kingsport TN. He has occupied this position for the past 14 years. Cleek was formerly a senior accountant with Arthur Young and Company.

The elastic modulus of poly(ethylene terephthalate-co-p-oxybenzoate)

The experimental approach to improve the mechanical properties of polymers proceeds essentially along two different lines: the modification of the processing of conventional polymers in order to obtain extended chain structures with better orientation, and the design of stiff, "rod-like" molecules exhibiting nematic liquid crystalline behaviour in the melt, which can be easily oriented in the solid state. High orientation and excellent mechanical properties can be achieved by solid-state or solution processing of flexible polymers which do not show mesophases [1-3]. More recently, thermotropic liquid crystalline polymers have attracted attention as a consequence of their good mechanical properties and easy processability [4, 5]. In fact the orientation of the liquid crystalline domains, which leads to a superior degree of orientation of the macromolecules along the fibre axis has been related to the possibility of producing materials with excellent levels of mechanical anisotropy. Different types of thermotropic nematogenics have been investigated [6]. Among these, the class of polymers which has received the highest attention is the copolyester, produced by Tennessee Eastman Company, initially synthesized by Jackson and Kuhfuss in 1976 [7]. The polymer is a polyethylene terephthalate modified by p-hydroxybenzoic acid (PET/PHB 60). Several papers have been published on the rheological [4] and on structural characterization [8, 9] of this new material. Most effort has been concentrated on the evaluation of the mechanical properties with the purpose to relate them to the processing of the polymer [4, 5]. Acierno et al. [4] found that the higher elastic moduli were reached when the fibres were spun at a lower temperature. They inferred that an important contribution to the high modulus would arise from crystallites of the hydroxybenzoic acid sequences. For the material extruded at a higher temperature (260 ° C) they measured a relatively high tensile modulus (about 20 GPa) which increases slightly with the draw ratio. More recently Tealdi et al. [10] reported higher elastic moduli for the polymer processed at higher temperatures than those found by Acierno et al. However, no indication of the exact value of the orientation of the macromolecules is provided in either paper. Sugiyama et al. [11] calculated the function of orientation of Hermans ( f ) using wide-angle X-ray patterns for fibres processed in different conditions of temperature and drawing. They found thatfdecreases with temperature and shear rate, but is practically independent of the spinline drawdown ratio. They inferred that almost all the orientation appears to be developed in the capillary. Muramatsu and Krigbaum [5] related the orientation, measured by X-ray, with the rheological behaviour and mechanical properties of the fibres. However, they do not provide any form of the function of orientation. In this letter we refer to the mechanical properties of fibres of PET/PHB 60 spun at 260 °C. The high modulus found is related to the high level of orientation, obtained from the large values of the order parameters, calculated from the X-ray diffraction patterns. Spinning of the nematic phase was performed using a Ceast rheometer. The piston-type extruder was operated at constant velocity, with a die having a 1 mm diameter. Fibres were spun at a single temperature, 260 ° C, using a capillary with LID = 10 and varying the span draw ratio. The extrusion rate, V0, was 45 cm min and the output flow rate, Q, was 0.35cm3min ~. About 5g polymer was used for each extrusion. In order to avoid moisture, the batches were previously dried overnight in a vacuum oven at 100 ° C. The spun fibres were collected with a take-up machine placed at a distance 0.3 m from the bottom of the capillary. The Vf/Vo ratios take-up velocity, Vr, was varied to obtain between 10 and 300. The true Vr/V0 ratios were evaluated as cross-sectional area variation and determined by measuring the decrease in the diameter of the fibres, using a microscope. Wide-angle X-ray diffraction patterns were recorded with a Siemens diffractometer using a flat film camera with CuKe radiation. Because of the small dimensions of the fibres, the exposure time ranged between 8 and 24h. Samples were fractured in liquid nitrogen and the fracture surface examined using a Cambridge Stereoscan 100 scanning electron microscope. The real component of the complex modulus, E', was determined using a Dynamic-mechanical spectrometer Dynastat system. One of the most important features of the Dynastat is the rise time control circuit that allows step-functions in load or displacement to be imposed on the sample without overshoot, but with rise time of an underdumped servo. Dynamic mechanical experiments were performed at room temperature and at a frequency of 1 Hz.

Improvements in acetone adsorption efficiency

Environmental ProgressVolume 4, Issue 1 p. 7-14 Article Improvements in acetone adsorption efficiency M. L. Mastroianni, M. L. Mastroianni Tennessee Eastman Co., Kingsport, Tenn. 37662 M. L. Mastroianni: was a process improvement chemical engineer in the Filter Products Division of Tennessee Eastman Company. He holds B.S.(1977) and M.S.(1979) degrees from the University of Missouri-Rolla in chemical engineering. After joining Tennessee Eastman in 1979, he worked with distillation and adsorption processes and general equipment design. He is a registered professional engineer in the state of Tennessee and a member of A.I.Ch.E. He is currently a Research Engineer with Monsanto Electrical Materials Co., P.O. Box 8, St. Peters, MO.Search for more papers by this authorS. G. Rochelle, S. G. Rochelle Tennessee Eastman Co., Kingsport, Tenn. 37662 S. G. Rochelle: is a senior engineering mechanicist in the Mechanical Systems and Materials Engineering group with Tennessee Eastman Company. He holds B.S.(1972), M.S.(1974), and Ph.D.(1977) degrees from Tennessee Technological University in engineering mechanics. Since joining Tennessee Eastman in 1977, he has done numerical modeling of polymer flows in a rotating annulus, torsional vibration during start-up of synchronous motor drive trains, carbon bed adsorption and, currently, dry spinning of cellulose acetate filaments. He is a member of the Society of Engineering Science, Sigma Xi, and the Society of Risk Analysis.Search for more papers by this author M. L. Mastroianni, M. L. Mastroianni Tennessee Eastman Co., Kingsport, Tenn. 37662 M. L. Mastroianni: was a process improvement chemical engineer in the Filter Products Division of Tennessee Eastman Company. He holds B.S.(1977) and M.S.(1979) degrees from the University of Missouri-Rolla in chemical engineering. After joining Tennessee Eastman in 1979, he worked with distillation and adsorption processes and general equipment design. He is a registered professional engineer in the state of Tennessee and a member of A.I.Ch.E. He is currently a Research Engineer with Monsanto Electrical Materials Co., P.O. Box 8, St. Peters, MO.Search for more papers by this authorS. G. Rochelle, S. G. Rochelle Tennessee Eastman Co., Kingsport, Tenn. 37662 S. G. Rochelle: is a senior engineering mechanicist in the Mechanical Systems and Materials Engineering group with Tennessee Eastman Company. He holds B.S.(1972), M.S.(1974), and Ph.D.(1977) degrees from Tennessee Technological University in engineering mechanics. Since joining Tennessee Eastman in 1977, he has done numerical modeling of polymer flows in a rotating annulus, torsional vibration during start-up of synchronous motor drive trains, carbon bed adsorption and, currently, dry spinning of cellulose acetate filaments. He is a member of the Society of Engineering Science, Sigma Xi, and the Society of Risk Analysis.Search for more papers by this author First published: February 1985 https://doi.org/10.1002/ep.670040106Citations: 4 AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Citing Literature Volume4, Issue1February 1985Pages 7-14 RelatedInformation

Brief Report: Summary of CMA Glycol Ether Research Activities

The Chemical Manufacturers Association (CMA) rep? resents the chemical industry in America. Membership in the Association is open to manufacturers of chemicals who sell a substantial portion of the chemicals they produce to others. The Association includes about 200 member companies, most of whom operate in the United States, with a few based in Canada. The size of CMAs member companies and the products they make are as varied as chemistry itself. Together, they repre? sent a major portion of the productive capacity of the industry. The Association administers special research and advocacy efforts frequently involving only a single product line. The projects probe for potential hazards from chemicals, providing information essential for protecting employees and the public. Some 23 projects are currently underway, funded by voluntary subscrip? tion from member companies. Eight manufacturers of glycol ethers established the Glycol Ethers Program Panel under the auspices of the CMA in 1980. The companies participating in the program are Dow Chemical USA, ICI Americas Inc, Olin Corporation, PPG Industries, Shell Chemical Company, Tennessee Eastman Company, Texaco Chemi-

Human Factors Engineering in Industry - How do You Begin?

Recently, information has become available about starting a human factors engineering program in industry. It appears that there is room for further practical information on this subject. This article will cover many aspects of beginning a “real world” human factors engineering program in a production industry. Tennessee Eastman Company began a human factors engineering program several years ago; this article is based on our experiences as well as some of the experiences that other companies have had.

Compatibility of blends of polyesters with the polyhydroxyether of bisphenol‐A

Journal of Polymer Science: Polymer Physics EditionVolume 18, Issue 11 p. 2299-2301 Note Compatibility of blends of polyesters with the polyhydroxyether of bisphenol-A R. W. Seymour, R. W. Seymour Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, Tennessee 37662Search for more papers by this authorB. E. Zehner, B. E. Zehner Department of Macromolecular Science, Case Western Reserve University, Cleveland, Ohio 44106Search for more papers by this author R. W. Seymour, R. W. Seymour Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, Tennessee 37662Search for more papers by this authorB. E. Zehner, B. E. Zehner Department of Macromolecular Science, Case Western Reserve University, Cleveland, Ohio 44106Search for more papers by this author First published: November 1980 https://doi.org/10.1002/pol.1980.180181115Citations: 23AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Citing Literature Volume18, Issue11November 1980Pages 2299-2301 RelatedInformation

Flow of molten poly(ethylene terephthalate) through packed beds of glass beads

AIChE JournalVolume 18, Issue 2 p. 443-445 Communication to the Editor Flow of molten poly(ethylene terephthalate) through packed beds of glass beads F. C. Wampler, F. C. Wampler Research Laboratories, Tennessee Eastman Company Kingsport, Tennessee 37662Search for more papers by this authorD. R. Gregory, Corresponding Author D. R. Gregory Research Laboratories, Tennessee Eastman Company Kingsport, Tennessee 37662Research Laboratories, Tennessee Eastman Company Kingsport, Tennessee 37662Search for more papers by this author F. C. Wampler, F. C. Wampler Research Laboratories, Tennessee Eastman Company Kingsport, Tennessee 37662Search for more papers by this authorD. R. Gregory, Corresponding Author D. R. Gregory Research Laboratories, Tennessee Eastman Company Kingsport, Tennessee 37662Research Laboratories, Tennessee Eastman Company Kingsport, Tennessee 37662Search for more papers by this author First published: March 1972 https://doi.org/10.1002/aic.690180233Citations: 4AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Citing Literature Volume18, Issue2March 1972Pages 443-445 RelatedInformation

Ureas from 2,4‐thiazolidinedione

Journal of Heterocyclic ChemistryVolume 8, Issue 5 p. 847-848 Note Ureas from 2,4-thiazolidinedione Gather Irick Jr., Gather Irick Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, Tennessee 37662Search for more papers by this author Gather Irick Jr., Gather Irick Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, Tennessee 37662Search for more papers by this author First published: October 1971 https://doi.org/10.1002/jhet.5570080533Citations: 3AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL No abstract is available for this article.Citing Literature Volume8, Issue5October 1971Pages 847-848 RelatedInformation

Introduction to the Symposium on Chemistry and Biochemistry of Tocopherols

LipidsVolume 6, Issue 4 p. 238-239 Article Introduction to the Symposium on Chemistry and Biochemistry of Tocopherols† David C. Herting, David C. Herting Health and Nutrition Research Division, Tennessee Eastman Company, Rochester, New York, 14603Search for more papers by this author David C. Herting, David C. Herting Health and Nutrition Research Division, Tennessee Eastman Company, Rochester, New York, 14603Search for more papers by this author First published: 01 April 1971 https://doi.org/10.1007/BF02538394Citations: 3 † One of six papers to be published from the Symposium “Chemistry and Biochemistry of Tocopherols” presented at the ISF-AOCS World Congress, Chicago, September 1970. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article.Citing Literature Volume6, Issue4April 1971Pages 238-239 RelatedInformation

Photolysis of terephthalate polyesters: Hydroxylation of the aromatic nuclei

Journal of Polymer Science Part B: Polymer LettersVolume 7, Issue 1 p. 7-9 Article Photolysis of terephthalate polyesters: Hydroxylation of the aromatic nuclei J. G. Pacifici, J. G. Pacifici Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport Tennessee 37662Search for more papers by this authorJ. M. Straley, J. M. Straley Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport Tennessee 37662Search for more papers by this author J. G. Pacifici, J. G. Pacifici Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport Tennessee 37662Search for more papers by this authorJ. M. Straley, J. M. Straley Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport Tennessee 37662Search for more papers by this author First published: January 1969 https://doi.org/10.1002/pol.1969.110070102Citations: 43AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Citing Literature Volume7, Issue1January 1969Pages 7-9 RelatedInformation

Kinetics and Mechanism of Heterogeneous Stereospecific α‐Olefin Polymerizations

Journal of Polymer Science Part C: Polymer SymposiaVolume 4, Issue 3 p. 1511-1528 Article Kinetics and Mechanism of Heterogeneous Stereospecific α-Olefin Polymerizations H. W. Coover Jr., H. W. Coover Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this author H. W. Coover Jr., H. W. Coover Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this author First published: 1963 https://doi.org/10.1002/polc.5070040303Citations: 14AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Citing Literature Volume4, Issue31963Pages 1511-1528 RelatedInformation

Structure and Properties of a New Polyester Fiber

An epitome of data obtained in the Research Laboratories of Tennessee Eastman Company on the structure and properties of polymers and fibers of poly (1,4-cyclohex ylenedimethylene terephthalate) is reported. Special attention is given to the effect on properties of varying the proportion of cis and trans isomers of the 1,4-cyclohexanedi methanol used in making the polymers. Solubility, density, and those properties of polymers that are associated with temperature are affected by the cis/trans ratio, but the tensile properties of fibers and fabrics are not. The conformational forms in which these isomers might occur are considered. The crystal structures, deduced from x-ray diffraction data, are unusual in that the crystal lattice in polymer composed wholly of either isomer is distorted by addition to the polymer of an appreciable proportion of the other isomer. Melting point data show no evidence for the existence of a eutectic composition. Kodel polyester fiber is at present manufactured of polymer in which the ratio of trans and cis isomers is approximately 2 to 1. This fiber has a very low degree of susceptibility to water. It is also highly resilient at room and laundering tempera tures, whether wet or dry. These factors probably account for its excellent behavior in wash-and-wear fabrics.

Comments on the structure of quenched isotactic polypropylene

Journal of Polymer ScienceVolume 39, Issue 135 p. 534-535 Letters to the Editor Comments on the structure of quenched isotactic polypropylene C. A. Boye Jr., C. A. Boye Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this authorM. T. Watson, M. T. Watson Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this authorH. W. Patton, H. W. Patton Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this author C. A. Boye Jr., C. A. Boye Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this authorM. T. Watson, M. T. Watson Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this authorH. W. Patton, H. W. Patton Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this author First published: September 1959 https://doi.org/10.1002/pol.1959.1203913548Citations: 12AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL No abstract is available for this article.Citing Literature Volume39, Issue135September 1959Pages 534-535 RelatedInformation

Crystalline poly(N‐isopropylacrylamide)

Journal of Polymer ScienceVolume 39, Issue 135 p. 532-533 Letters to the Editor Crystalline poly(N -isopropylacrylamide) H. W. Coover Jr., H. W. Coover Jr. Research Laboratories Tennessee Eastman Company Division of Eastman Kodak Company Kingsport, TennesseeSearch for more papers by this author H. W. Coover Jr., H. W. Coover Jr. Research Laboratories Tennessee Eastman Company Division of Eastman Kodak Company Kingsport, TennesseeSearch for more papers by this author First published: September 1959 https://doi.org/10.1002/pol.1959.1203913547Citations: 3AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat No abstract is available for this article.Citing Literature Volume39, Issue135September 1959Pages 532-533 RelatedInformation

A viscometer for rapid measurements of dilute polymer solutions at elevated temperatures

Journal of Polymer ScienceVolume 26, Issue 113 p. 227-230 Letter to the Editor A viscometer for rapid measurements of dilute polymer solutions at elevated temperatures Roger M. Schulken Jr., Roger M. Schulken Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this authorMary Lynn Sparks, Mary Lynn Sparks Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this author Roger M. Schulken Jr., Roger M. Schulken Jr. Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this authorMary Lynn Sparks, Mary Lynn Sparks Research Laboratories, Tennessee Eastman Company, Division of Eastman Kodak Company, Kingsport, TennesseeSearch for more papers by this author First published: November 1957 https://doi.org/10.1002/pol.1957.1202611309Citations: 12AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Share a linkShare onFacebookTwitterLinked InRedditWechat Citing Literature Volume26, Issue113November 1957Pages 227-230 RelatedInformation

Analysis of butylated hydroxyanisole in paper and paperboard

Journal of the American Oil Chemists' SocietyVolume 31, Issue 10 p. 424-427 Article Analysis of butylated hydroxyanisole in paper and paperboard James J. Austin, James J. Austin Eastman Chemical Products Inc., Kingsport, TennesseeSearch for more papers by this author James J. Austin, James J. Austin Eastman Chemical Products Inc., Kingsport, TennesseeSearch for more papers by this author First published: October 1954 https://doi.org/10.1007/BF02639026Citations: 7 Sales representative for Tennessee Eastman Company, Division of Eastman Kodak Company. AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Citing Literature Volume31, Issue10October 1954Pages 424-427 RelatedInformation