Temperature-sensitive Replicon Research Articles

Development of an efficient iterative genome editing method in Bacillus subtilis using the CRISPR-AsCpf1 system.

Bacillus subtilis is a useful chassis in the fields of synthetic biology and metabolic engineering for chemical production. Here, we constructed CRISPR-AsCpf1-based expression plasmids with the temperature-sensitive replicon for iterative genome editing in B. subtilis. This method allowed gene insertion and large genomic deletion with an editing efficiency of up 80%-100% and rapid plasmid curing to facilitate the iterative genome editing in B. subtilis 168. Using the customized CRISPR-AsCpf1 system, we successfully and efficiently implemented the related gene editing in B. subtilis 168 for hyaluronic acid (HA) biosynthesis, HA synthase gene (hasA) insertion, UDP-glucose-dehydrogenase gene (tuaD) insertion, and eps gene cluster (epsA-O) deletion. The heterologous production of HA was realized by the engineered strain with a yield of 1.39 g/L. These results support the finding that the CRISPR-AsCpf1 system is highly efficient in bacteria genome editing and provide valuable guidance and essential references for genome engineering in B. subtilis using the CRISPR-AsCpf1 system.

Rapid Genome Engineering of Pseudomonas Assisted by Fluorescent Markers and Tractable Curing of Plasmids.

Precise genome engineering has become a commonplace technique for metabolic engineering. Also, insertion, deletion and alteration of genes and other functional DNA sequences are essential for understanding and engineering cells. Several techniques have been developed to this end (e.g., CRISPR/Cas-assisted methods, homologous recombination, or λ Red recombineering), yet most of them rely on the use of auxiliary plasmids, which have to be cured after the editing procedure. Temperature-sensitive replicons, counter-selectable markers or repeated passaging of plasmid-bearing cells have been traditionally employed to circumvent this hurdle. While these protocols work reasonably well in some bacteria, they are not applicable for other species or are time consuming and laborious. Here, we present a fast and versatile protocol of fluorescent marker-assisted genome editing in Pseudomonas putida, followed by clean curing of auxiliary plasmids through user-controlled plasmid replication. One fluorescent marker facilitates identification of genome-edited colonies, while the second reporter enables detection of plasmid-free bacterial clones. Not only is this protocol the fastest available for Pseudomonas species, but it can be easily adapted to any type of genome modifications, including sequence deletions, insertions, and replacements. Graphical abstract: Rapid genome engineering of Pseudomonas with curable plasmids.

Synthetic control of plasmid replication enables target- and self-curing of vectors and expedites genome engineering of Pseudomonas putida

Genome engineering of non-conventional microorganisms calls for the development of dedicated synthetic biology tools. Pseudomonas putida is a Gram-negative, non-pathogenic soil bacterium widely used for metabolic engineering owing to its versatile metabolism and high levels of tolerance to different types of stress. Genome editing of P. putida largely relies on homologous recombination events, assisted by helper plasmid-based expression of genes encoding DNA modifying enzymes. Plasmid curing from selected isolates is the most tedious and time-consuming step of this procedure, and implementing commonly used methods to this end in P. putida (e.g. temperature-sensitive replicons) is often impractical. To tackle this issue, we have developed a toolbox for both target- and self-curing of plasmid DNA in Pseudomonas species. Our method enables plasmid-curing in a simple cultivation step by combining in vivo digestion of vectors by the I-SceI homing nuclease with synthetic control of plasmid replication, triggered by the addition of a cheap chemical inducer (3-methylbenzoate) to the medium. The system displays an efficiency of vector curing >90% and the screening of plasmid-free clones is greatly facilitated by the use of fluorescent markers that can be selected according to the application intended. Furthermore, quick genome engineering of P. putida using self-curing plasmids is demonstrated through genome reduction of the platform strain EM42 by eliminating all genes encoding β-lactamases, the catabolic ben gene cluster, and the pyoverdine synthesis machinery. Physiological characterization of the resulting streamlined strain, P. putida SEM10, revealed advantageous features that could be exploited for metabolic engineering.

Marker‐Free System Using Ribosomal Promoters Enhanced Xylose/Glucose Isomerase Production in Streptomyces rubiginosus

Xylose/glucose isomerases are important industrial enzymes that are most widely used in food industries; however, their previously reported expression levels do not meet the requirements for industrial application. Here, an antibiotic resistance marker (ARM)-free system driven by ribosomal RNA (rRNA) promoters is developed to obtain high-level xylose/glucose isomerase (XI/GI) expression in Streptomyces rubiginosus (S. rubiginosus). The rRNA promoter rrnD yields the highest glucose isomerase production titer of XIs/GIs, which is eight times higher than that of ermEp* and 2.6 times higher than that of kasOp*. The integrated ARM gene is removed by further introduction of the Cre plasmid with a temperature-sensitive replicon. The production titer of XIs/GIs is further improved by replacing the xylR gene with an additional expression glucose isomerase cassette at the xylR locus. Ultimately, the glucose isomerase activity reaches up to 79.7 ± 7.5 U mL-1 at 96 h. The results support the robustness and stability of XI/GI production with this ARM-free system using optimal ribosomal promoters in S. rubiginosus, demonstrating strong potential in large-scale industrial applications. Besides, the results imply that rRNA promoters are strong promoters that can be used for protein engineering or metabolic engineering.

A temperature-sensitive replicon enables efficient gene inactivation in Pseudomonas aeruginosa

Tools to enable genome editing are essential for understanding physiology. Here we report a gene replacement method in Pseudomonas aeruginosa using a temperature-sensitive replicon plasmid that does not require mating or isolation of a merodiploid intermediate. This approach was validated by replacing the non-essential ampD gene with a gentamicin resistance cassette. In addition lpxA and lpxD, both located in a complex gene cluster including multiple downstream essential genes, were inactivated when complemented by each target gene in trans. These strains did not grow when expression of the gene in trans was repressed, confirming that both genes are essential for viability. This method facilitates efficient gene inactivation in P. aeruginosa.

Development and implementation of rapid metabolic engineering tools for chemical and fuel production in Geobacillus thermoglucosidasius NCIMB 11955

BackgroundThe thermophile Geobacillus thermoglucosidasius has considerable attraction as a chassis for the production of chemicals and fuels. It utilises a wide range of sugars and oligosaccharides typical of those derived from lignocellulose and grows at elevated temperatures. The latter improves the rate of feed conversion, reduces fermentation cooling costs and minimises the risks of contamination. Full exploitation of its potential has been hindered by a dearth of effective gene tools.ResultsHere we designed and tested a collection of vectors (pMTL60000 series) in G. thermoglucosidasius NCIMB 11955 equivalent to the widely used clostridial pMTL80000 modular plasmid series. By combining a temperature-sensitive replicon and a heterologous pyrE gene from Geobacillus kaustophilus as a counter-selection marker, a highly effective and rapid gene knock-out/knock-in system was established. Its use required the initial creation of uracil auxotroph through deletion of pyrE using allele-coupled exchange (ACE) and selection for resistance to 5-fluoroorotic acid. The turnaround time for the construction of further mutants in this pyrE minus strain was typically 5 days. Following the creation of the desired mutant, the pyrE allele was restored to wild type, within 3 days, using ACE and selection for uracil prototrophy. Concomitant with this process, cargo DNA (pheB) could be readily integrated at the pyrE locus. The system’s utility was demonstrated through the generation in just 30 days of three independently engineered strains equivalent to a previously constructed ethanol production strain, TM242. This involved the creation of two in-frame deletions (ldh and pfl) and the replacement of a promoter region of a third gene (pdh) with an up-regulated variant. In no case did the production of ethanol match that of TM242. Genome sequencing of the parental strain, TM242, and constructed mutant derivatives suggested that NCIMB 11955 is prone to the emergence of random mutations which can dramatically affect phenotype.ConclusionsThe procedures and principles developed for clostridia, based on the use of pyrE alleles and ACE, may be readily deployed in G. thermoglucosidasius. Marker-less, in-frame deletion mutants can be rapidly generated in 5 days. However, ancillary mutations frequently arise, which can influence phenotype. This observation emphasises the need for improved screening and selection procedures at each step of the engineering processes, based on the generation of multiple, independent strains and whole-genome sequencing.

An rpsL-based allelic exchange vector for Staphylococcus aureus

Staphylococcus aureus is one of the most successful bacterial pathogens, harboring a vast repertoire of virulence factors in its arsenal. As such, the genetic manipulation of S. aureus chromosomal DNA is an important tool for the study of genes involved in virulence and survival in the host. Previously reported allelic exchange vectors for S. aureus are shuttle vectors that can be propagated in Escherichia coli, so that standard genetic manipulations can be carried out. Most of the vectors currently in use carry the temperature-sensitive replicon (pE194ts) that was originally developed for use in Bacillus subtilis. Here we show that in S. aureus, the thermosensitivity of a pE194ts vector is incomplete at standard non-permissive temperatures (42 °C), and replication of the plasmid is impaired but not abolished. We report rpsL-based counterselection vectors, with an improved temperature-sensitive replicon (pT181 repC3) that is completely blocked for replication in S. aureus at non-permissive and standard growth temperature (37 °C). We also describe a set of temperature-sensitive vectors that can be cured at standard growth temperature. These vectors provide highly effective tools for rapidly generating allelic replacement mutations and curing expression plasmids, and expand the genetic tool set available for the study of S. aureus.

Proper Fatty Acid Composition Rather than an Ionizable Lipid Amine Is Required for Full Transport Function of Lactose Permease from Escherichia coli

Energy-dependent uphill transport but not energy-independent downhill transport by lactose permease (LacY) is impaired when expressed in Escherichia coli cells or reconstituted in liposomes lacking phosphatidylethanolamine (PE) and containing only anionic phospholipids. The absence of PE results in inversion of the N-terminal half and misfolding of periplasmic domain P7, which are required for uphill transport of substrates. Replacement of PE in vitro by lipids with no net charge (phosphatidylcholine (PC), monoglucosyl diacylglycerol (GlcDAG), or diglucosyl diacylglycerol (GlcGlcDAG)) supported wild type transmembrane topology of the N-terminal half of LacY. The restoration of uphill transport in vitro was dependent on LacY native topology and proper folding of P7. Support of uphill transport by net neutral lipids in vitro (PE > PC ≫ GlcDAG ≠ GlcGlcDAG provided that PE or PC contained one saturated fatty acid) paralleled the results observed previously in vivo (PE = PC > GlcDAG ≠ GlcGlcDAG). Therefore, a free amino group is not required for uphill transport as previously concluded based on the lack of in vitro uphill transport when fully unsaturated PC replaced E. coli-derived PE. A close correlation was observed in vivo and in vitro between the ability of LacY to carry out uphill transport, the native conformation of P7, and the lipid headgroup and fatty acid composition. Therefore, the headgroup and the fatty acid composition of lipids are important for defining LacY topological organization and catalytically important structural features, further illustrating the direct role of lipids, independent of other cellular factors, in defining membrane protein structure/function.

Multiple Mechanisms Contribute to Lateral Transfer of an Organophosphate Degradation (opd) Island in Sphingobium fuliginis ATCC 27551

The complete sequence of pPDL2 (37,317 bp), an indigenous plasmid of Sphingobium fuliginis ATCC 27551 that encodes genes for organophosphate degradation (opd), revealed the existence of a site-specific integrase (int) gene with an attachment site attP, typically seen in integrative mobilizable elements (IME). In agreement with this sequence information, site-specific recombination was observed between pPDL2 and an artificial plasmid having a temperature-sensitive replicon and a cloned attB site at the 3′ end of the seryl tRNA gene of Sphingobium japonicum. The opd gene cluster on pPDL2 was found to be part of an active catabolic transposon with mobile elements y4qE and Tn3 at its flanking ends. Besides the previously reported opd cluster, this transposon contains genes coding for protocatechuate dioxygenase and for two transport proteins from the major facilitator family that are predicted to be involved in transport and metabolism of aromatic compounds. A pPDL2 derivative, pPDL2-K, was horizontally transferred into Escherichia coli and Acinetobacter strains, suggesting that the oriT identified in pPDL2 is functional. A well-defined replicative origin (oriV), repA was identified along with a plasmid addiction module relB/relE that would support stable maintenance of pPDL2 in Sphingobium fuliginis ATCC 27551. However, if pPDL2 is laterally transferred into hosts that do not support its replication, the opd cluster appears to integrate into the host chromosome, either through transposition or through site-specific integration. The data presented in this study help to explain the existence of identical opd genes among soil bacteria.

TransFLP — A Method to Genetically Modify <em>Vibrio cholerae</em> Based on Natural Transformation and FLP-recombination

Several methods are available to manipulate bacterial chromosomes(1-3). Most of these protocols rely on the insertion of conditionally replicative plasmids (e.g. harboring pir-dependent or temperature-sensitive replicons(1,2)). These plasmids are integrated into bacterial chromosomes based on homology-mediated recombination. Such insertional mutants are often directly used in experimental settings. Alternatively, selection for plasmid excision followed by its loss can be performed, which for Gram-negative bacteria often relies on the counter-selectable levan sucrase enzyme encoded by the sacB gene(4). The excision can either restore the pre-insertion genotype or result in an exchange between the chromosome and the plasmid-encoded copy of the modified gene. A disadvantage of this technique is that it is time-consuming. The plasmid has to be cloned first; it requires horizontal transfer into V. cholerae (most notably by mating with an E. coli donor strain) or artificial transformation of the latter; and the excision of the plasmid is random and can either restore the initial genotype or create the desired modification if no positive selection is exerted. Here, we present a method for rapid manipulation of the V. cholerae chromosome(s)(5) (Figure 1). This TransFLP method is based on the recently discovered chitin-mediated induction of natural competence in this organism(6) and other representative of the genus Vibrio such as V. fischeri(7). Natural competence allows the uptake of free DNA including PCR-generated DNA fragments. Once taken up, the DNA recombines with the chromosome given the presence of a minimum of 250-500 bp of flanking homologous region(8). Including a selection marker in-between these flanking regions allows easy detection of frequently occurring transformants. This method can be used for different genetic manipulations of V. cholerae and potentially also other naturally competent bacteria. We provide three novel examples on what can be accomplished by this method in addition to our previously published study on single gene deletions and the addition of affinity-tag sequences(5). Several optimization steps concerning the initial protocol of chitin-induced natural transformation(6) are incorporated in this TransFLP protocol. These include among others the replacement of crab shell fragments by commercially available chitin flakes(8), the donation of PCR-derived DNA as transforming material(9), and the addition of FLP-recombination target sites (FRT)(5). FRT sites allow site-directed excision of the selection marker mediated by the Flp recombinase(10).

Cloning-Independent and Counterselectable Markerless Mutagenesis System in Streptococcus mutans

Insertion duplication mutagenesis and allelic replacement mutagenesis are among the most commonly utilized approaches for targeted mutagenesis in bacteria. However, both techniques are limited by a variety of factors that can complicate mutant phenotypic studies. To circumvent these limitations, multiple markerless mutagenesis techniques have been developed that utilize either temperature-sensitive plasmids or counterselectable suicide vectors containing both positive- and negative-selection markers. For many species, these techniques are not especially useful due to difficulties of cloning with Escherichia coli and/or a lack of functional negative-selection markers. In this study, we describe the development of a novel approach for the creation of markerless mutations. This system employs a cloning-independent methodology and should be easily adaptable to a wide array of Gram-positive and Gram-negative bacterial species. The entire process of creating both the counterselection cassette and mutation constructs can be completed using overlapping PCR protocols, which allows extremely quick assembly and eliminates the requirement for either temperature-sensitive replicons or suicide vectors. As a proof of principle, we used Streptococcus mutans reference strain UA159 to create markerless in-frame deletions of 3 separate bacteriocin genes as well as triple mutants containing all 3 deletions. Using a panel of 5 separate wild-type S. mutans strains, we further demonstrated that the procedure is nearly 100% efficient at generating clones with the desired markerless mutation, which is a considerable improvement in yield compared to existing approaches.

Efficient markerless gene replacement in Corynebacterium glutamicum using a new temperature-sensitive plasmid

Random chemical mutation of a Corynebacterium glutamicum– Escherichia coli shuttle vector derived from plasmid pCGR2 was done using hydroxylamine. It brought about amino acid substitutions G109D and E180K within the replicase superfamily domain of the plasmid's RepA protein and rendered the plasmid highly unstable, especially at higher incubation temperatures. Colony formation of C. glutamicum was consequently completely inhibited at 37 °C but not at 25 °C. G109 is a semi-conserved residue mutation which resulted in major temperature sensitivity. E180 on the other hand is not conserved even among RepA proteins of closely related C. glutamicum pCG1 family plasmids and its independent mutation caused relatively moderate plasmid instability. Nonetheless, simultaneous mutation of both residues was required to achieve temperature-sensitive colony formation. This new pCGR2-derived temperature-sensitive plasmid enabled highly efficient chromosomal integration in a variety of C. glutamicum wild-type strains, proving its usefulness in gene disruption studies. Based on this, an efficient markerless gene replacement system was demonstrated using a selection system incorporating the temperature-sensitive replicon and Bacillus subtilis sacB selection marker, a system hitherto not used in this bacterium. Single-crossover integrants were accurately selected by temperature-dependent manner and 93% of the colonies obtained by the subsequent sucrose selection were successful double-crossover recombinants.

The SmpB-tmRNA Tagging System Plays Important Roles in Streptomyces coelicolor Growth and Development

The ssrA gene encodes tmRNA that, together with a specialized tmRNA-binding protein, SmpB, forms part of a ribonucleoprotein complex, provides a template for the resumption of translation elongation, subsequent termination and recycling of stalled ribosomes. In addition, the mRNA-like domain of tmRNA encodes a peptide that tags polypeptides derived from stalled ribosomes for degradation. Streptomyces are unique bacteria that undergo a developmental cycle culminating at sporulation that is at least partly controlled at the level of translation elongation by the abundance of a rare tRNA that decodes UUA codons found in a relatively small number of open reading frames prompting us to examine the role of tmRNA in S. coelicolor. Using a temperature sensitive replicon, we found that the ssrA gene could be disrupted only in cells with an extra-copy wild type gene but not in wild type cells or cells with an extra-copy mutant tmRNA (tmRNADD) encoding a degradation-resistant tag. A cosmid-based gene replacement method that does not include a high temperature step enabled us to disrupt both the ssrA and smpB genes separately and at the same time suggesting that the tmRNA tagging system may be required for cell survival under high temperature. Indeed, mutant cells show growth and sporulation defects at high temperature and under optimal culture conditions. Interestingly, even though these defects can be completely restored by wild type genes, the ΔssrA strain was only partially corrected by tmRNADD. In addition, wildtype tmRNA can restore the hygromycin-resistance to ΔssrA cells while tmRNADD failed to do so suggesting that degradation of aberrant peptides is important for antibiotic resistance. Overall, these results suggest that the tmRNA tagging system plays important roles during Streptomyces growth and sporulation under both normal and stress conditions.

Natural Homolog of tRNA Synthetase Editing Domain Rescues Conditional Lethality Caused by Mistranslation

AlaXp is a widely distributed (from bacteria to humans) genome-encoded homolog of the editing domain of alanyl-tRNA synthetases. Editing repairs the confusion of serine and glycine for alanine through clearance of mischarged (with Ser or Gly) tRNA(Ala). Because genome-encoded fragments of editing domains of other synthetases are scarce, the AlaXp redundancy of the editing domain of alanyl-tRNA synthetase is thought to reflect an unusual sensitivity of cells to mistranslation at codons for Ala. Indeed, a small defect in the editing activity of alanyl-tRNA synthetase is causally linked to neurodegeneration in the mouse. Although limited earlier studies demonstrated that AlaXp deacylated mischarged tRNA(Ala) in vitro, the significance of this activity in vivo has not been clear. Here we describe a bacterial system specifically designed to investigate activity of AlaXp in vivo. Serine toxicity, experienced by a strain harboring an editing-defective alanyl-tRNA synthetase, was rescued by an AlaXp-encoding transgene. Rescue was dependent on amino acid residues in AlaXp that are needed for its in vitro catalytic activity. Thus, the editing activity per se of AlaXp was essential for suppressing mistranslation. The results support the idea that the unique widespread distribution of AlaXp arises from the singular difficulties, for translation, poised by alanine.

Substrate Specificity of RdgB Protein, a Deoxyribonucleoside Triphosphate Pyrophosphohydrolase

We have previously reported the identification of a DNA repair system in Escherichia coli for the prevention of the stable incorporation of noncanonical purine dNTPs into DNA. We hypothesized that the RdgB protein is active on 2'-deoxy-N-6-hydroxylaminopurine triphosphate (dHAPTP) as well as deoxyinosine triphosphate. Here we show that RdgB protein and RdgB homologs from Saccharomyces cerevisiae, mouse, and human all possess deoxyribonucleoside triphosphate pyrophosphohydrolase activity and that all four RdgB homologs have high specificity for dHAPTP and deoxyinosine triphosphate compared with the four canonical dNTPs and several other noncanonical (d)NTPs. Kinetic analysis reveals that the major source of the substrate specificity lies in changes in K(m) for the various substrates. The expression of these enzymes in E. coli complements defects that are caused by the incorporation of HAP and an endogenous noncanonical purine into DNA. Our data support a preemptive role for the RdgB homologs in excluding endogenous and exogenous modified purine dNTPs from incorporation into DNA.

06/02496 Analysis of using gasification and incineration for thermal processing of wastes: Bebar, L. et al. Applied Thermal Engineering, 2005, 25, (7), 1045–1055.

We have constructed a set of plasmids that can be used to express recombineering functions in some gram-negative bacteria, thereby facilitating in vivo genetic manipulations. These plasmids include an origin of replication and a segment of the bacteriophage λ genome comprising the red genes (exo, bet and gam) under their native control. These constructs do not require the anti-termination event normally required for Red expression, making their application more likely in divergent species. Some of the plasmids have temperature-sensitive replicons to simplify curing. In creating these vectors we developed two useful recombineering applications. Any gene linked to a drug marker can be retrieved by gap-repair using only a plasmid origin and target homologies. A plasmid origin of replication can be changed to a different origin by targeted replacement, to potentially alter its copy number and host range. Both these techniques will prove useful for manipulation of plasmids in vivo. Most of the Red plasmid constructs catalyzed efficient recombination in E. coli with a low level of uninduced background recombination. These Red plasmids have been successfully tested in Salmonella, and we anticipate that that they will provide efficient recombination in other related gram-negative bacteria.

Use of targetrons to disrupt essential and nonessential genes in Staphylococcus aureus reveals temperature sensitivity of Ll.LtrB group II intron splicing

We show that a targetron based on the Lactococcus lactis Ll.LtrB group II intron can be used for efficient chromosomal gene disruption in the human pathogen Staphylococcus aureus. Targetrons expressed from derivatives of vector pCN37, which uses a cadmium-inducible promoter, or pCN39, a derivative of pCN37 with a temperature-sensitive replicon, gave site-specific disruptants of the hsa and seb genes in 37%-100% of plated colonies without selection. To disrupt hsa, an essential gene, we used a group II intron that integrates in the sense orientation relative to target gene transcription and thus could be removed by RNA splicing, enabling the production of functional HSa protein. We show that because splicing of the Ll.LtrB intron by the intron-encoded protein is temperature-sensitive, this method yields a conditional hsa disruptant that grows at 32 degrees C but not 43 degrees C. The temperature sensitivity of the splicing reaction suggests a general means of obtaining one-step conditional disruptions in any organism. In nature, temperature sensitivity of group II intron splicing could limit the temperature range of an organism containing a group II intron inserted in an essential gene.

A set of recombineering plasmids for gram-negative bacteria

We have constructed a set of plasmids that can be used to express recombineering functions in some gram-negative bacteria, thereby facilitating in vivo genetic manipulations. These plasmids include an origin of replication and a segment of the bacteriophage λ genome comprising the red genes ( exo, bet and gam) under their native control. These constructs do not require the anti-termination event normally required for Red expression, making their application more likely in divergent species. Some of the plasmids have temperature-sensitive replicons to simplify curing. In creating these vectors we developed two useful recombineering applications. Any gene linked to a drug marker can be retrieved by gap-repair using only a plasmid origin and target homologies. A plasmid origin of replication can be changed to a different origin by targeted replacement, to potentially alter its copy number and host range. Both these techniques will prove useful for manipulation of plasmids in vivo. Most of the Red plasmid constructs catalyzed efficient recombination in E. coli with a low level of uninduced background recombination. These Red plasmids have been successfully tested in Salmonella, and we anticipate that that they will provide efficient recombination in other related gram-negative bacteria.

In Vivo Random Mutagenesis of Bacillus subtilis by Use of TnYLB-1, a mariner -Based Transposon

This report describes the construction and characterization of a mariner-based transposon system designed to be used in Bacillus subtilis, but potentially applicable to other gram-positive bacteria. Two pUC19-derived plasmids were created that contain the mariner-Himar1 transposase gene, modified for expression in B. subtilis, under the control of either sigmaA- or sigmaB-dependent promoters. Both plasmids also contain a transposable element (TnYLB-1) consisting of a Kan r cassette bracketed by the Himar1-recognized inverse terminal repeats, as well as the temperature-sensitive replicon and Erm r gene of pE194ts. TnYLB-1 transposes into the B. subtilis chromosome with high frequency (10(-2)) from either plasmid. Southern hybridization analyses of 15 transposants and sequence analyses of the insertion sites of 10 of these are consistent with random transposition, requiring only a "TA" dinucleotide as the essential target in the recipient DNA. Two hundred transposants screened for sporulation proficiency and auxotrophy yielded five Spo- clones, three with insertions in known sporulation genes (kinA, spoVT, and yqfD) and two in genes (ybaN and yubB) with unknown functions. Two auxotrophic mutants were identified among the 200 transposants, one with an insertion in lysA and another in a gene (yjzB) whose function is unknown.

Elucidation of tRNA-dependent editing by a class II tRNA synthetase and significance for cell viability.

Editing of misactivated amino acids by class I tRNA synthetases is encoded by a specialized internal domain specific to class I enzymes. In contrast, little is known about editing activities of the structurally distinct class II enzymes. Here we show that the class II alanyl-tRNA synthetase (AlaRS) has a specialized internal domain that appears weakly related to an appended domain of threonyl-tRNA synthetase (ThrRS), but is unrelated to that found in class I enzymes. Editing of misactivated glycine or serine was shown to require a tRNA cofactor. Specific mutations in the aforementioned domain disrupt editing and lead to production of mischarged tRNA. This class-specific editing domain was found to be essential for cell growth, in the presence of elevated concentrations of glycine or serine. In contrast to ThrRS, where the editing domain is not found in all three kingdoms of living organisms, it was incorporated early into AlaRSs and is present throughout evolution. Thus, tRNA-dependent editing by AlaRS may have been critical for making the genetic code sufficiently accurate to generate the tree of life.