Temperature-sensitive Replication Research Articles

Construction of a Temperature-Sensitive Shuttle Vector between Lactic Acid Bacteria and Escherichia coli and Its Application to a Tn10-Based Random Mutagenesis Tool in Lactic Acid Bacteria.

In the present study, we have obtained a temperature-sensitive replication mutant in the Escherichia (E.) coli-lactic acid bacterium (LAB) shuttle vector pLES003-b carrying erythromycin-resistance gene by error-prone PCR technique. Among 858 clones obtained in the construction of the random mutation libraries of pLES003-b in the ori and repA regions, three clones could grow normally at 28 °C but not at 42 °C. One of the clones was designated as pLES003-b TS1. The sequencing analysis of pLES003-b TS1 revealed that the plasmid has four substitution mutations (376G > A, 435A > T, 914C > A, and 1996T > A) and one insertional mutation (1806_1807insA). Among those mutations, substitution mutation 914C > A, which leads to a CGC-to-AGC codon change at position 44 of the RepA protein (arginine-to-serine substitution mutation: R44S in RepA), was predicted to be a cause of temperature sensitivity. Therefore, the C-to-A substitution was introduced into the repA gene in pLES003-b using a site-directed mutagenesis method, and the resultant plasmid was electroporated into a Lactobacillus (L.) plantarum cell. The resultant transformant cannot grow at 42 °C in the presence of erythromycin, which is used as a selective marker, indicating that the R44S point mutation in the RepA protein may be crucial for temperature sensitivity. Furthermore, we have developed a new plasmid as an efficient genetic engineering tool for random insertional mutagenesis in LABs using a combination of transposon Tn10 and the temperature-sensitive replication system in pLES003-b. The resultant plasmid vector, which was designated pLES-Tn10-TS1, would be useful for genetic analysis of the functional molecule in lactic acid bacterial strains.

Bifidobacterium-Escherichia coli Shuttle Vector Series pKO403, with Temperature-Sensitive Replication Origin for Gene Knockout in Bifidobacterium.

ABSTRACTA series of Bifidobacterium-Escherichia coli shuttle vectors (pKO403-lacZ′-Cm, pKO403-lacZ′-Sp, pKO403-lacZ′-p15A) were constructed based on the pKO403 backbone, which carries a temperature-sensitive replication origin. These vectors carry the lacZ′α fragment, overhung by two facing type IIS restriction sites, for blue-white selection and seamless gene cloning. These vectors are useful for gene knockout or multigene integration into the chromosome of Bifidobacterium.

Exploring the pathogenic function of Pantoea ananatis endogenous plasmid by an efficient and simple plasmid elimination strategy

The bacterium Pantoea ananatis is associated with devastating plant diseases that cause serious economic losses. Strain DZ-12 was previously isolated from maize brown rot leaves in Hebei Province, China and its genome sequencing revealed that it belongs to P. ananatis. It contains a large, endogenous plasmid, pDZ-12. Different studies have shown that virulence determinants are frequently carried on plasmids. To determine whether pDZ-12 from P. ananatis has any effect on pathogenicity, the plasmid was eliminated by substituting its native replication genes with temperature-sensitive replication genes. The resulting temperature-sensitive plasmid could be cured by growing cells at high temperature (37℃). Loss of pDZ-12 from P. ananatis DZ-12 led to a decreased disease severity in maize plants suggesting that the endogenous plasmid is important for pathogenesis. Loss of pDZ-12 also affected the ability of the bacterium to form biofilms. The study provides the first evidence that the endogenous plasmid of P. ananatis DZ-12 is important for pathogenesis in maize plants and carries genes involved in biofilm formation. This study also presents the first report on curing a plasmid from P. ananatis.

Improvement of l-Valine Production by Atmospheric and Room Temperature Plasma Mutagenesis and High-Throughput Screening in Corynebacterium glutamicum.

As one of the branched-chain amino acids, l-valine is an essential nutrient for most mammalian species. In this study, the l-valine producer Corynebacterium glutamicumΔppcΔaceEΔalatΔpqo was first constructed. Additionally, an improved biosensor based on the Lrp-type transcriptional regulator and temperature-sensitive replication was built. Then, the C. glutamicum strain was mutagenized by atmospheric and room temperature plasma. A sequential three-step procedure was carried out to screen l-valine-producing strains, including the fluorescence-activated cell sorting (FACS), 96-well plate screening, and flask fermentation. The final mutant HL2-7 obtained by screening produced 3.20 g/L of l-valine, which was 21.47% higher than the titer produced by the starting strain. This study demonstrates that the l-valine-producing mutants can be successfully isolated based on the Lrp sensor system in combination with FACS screening after random mutagenesis.

Construction and Use of Transposon MycoTetOP 2 for Isolation of Conditional Mycobacteria Mutants.

Mycobacteria are unique in many aspects of their biology. The development of genetic tools to identify genes critical for their growth by forward genetic analysis holds great promises to advance our understanding of their cellular, physiological and biochemical processes. Here we report the development of a novel transposon, MycoTetOP2, to aid the identification of such genes by direct transposon mutagenesis. This mariner-based transposon contains nested anhydrotetracycline (ATc)-inducible promoters to drive transcription outward from both of its ends. In addition, it includes the Escherichia coli R6Kγ origin to facilitate the identification of insertion sites. MycoTetOP2 was placed in a shuttle plasmid with a temperature-sensitive DNA replication origin in mycobacteria. This allows propagation of mycobacteria harboring the plasmid at a permissive temperature. The resulting population of cells can then be subjected to a temperature shift to select for transposon mutants. This transposon and its delivery system, once constructed, were tested in the fast-growing model Mycobacterium smegmatis and 13 mutants with ATc-dependent growth were isolated. The identification of the insertion sites in these mutants led to nine unique genetic loci with genes critical for essential processes in both M. smegmatis and Mycobacterium tuberculosis. These results demonstrate that MycoTetOP2 and its delivery vector provide valuable tools for the studies of mycobacteria by forward genetics.

Construction of an easy-to-use CRISPR-Cas9 system by patching a newly designed EXIT circuit

BackgroundPlasmid-borne genetic editing tools, including the widely used CRISPR-Cas9 system, have greatly facilitated bacterial programming to obtain novel functionalities. However, the lack of effective post-editing plasmid elimination methods impedes follow-up genetic manipulation or application. Conventional strategies including exposure to physical and chemical treatments, or exploiting temperature-sensitive replication origins have several drawbacks (e.g., they are limited for efficiency and are time-consuming). Therefore, the demand is apparent for easy and rapid elimination of the tool plasmids from their bacterial hosts after genetic manipulation.ResultsTo bridge this gap, we designed a novel EXIT circuit with the homing endonuclease, which can be exploited for rapid and efficient elimination of various plasmids with diverse replication origins. As a proof of concept, we validated the EXIT circuit in Escherichia coli by harnessing homing endonuclease I-SceI and its cleavage site. When integrated into multiple plasmids with different origins, the EXIT circuit allowed them to be eliminated from the host cells, simultaneously. By combining the widely used plasmid-borne CRISPR-Cas9 system and the EXIT circuit, we constructed an easy-to-use CRISPR-Cas9 system that eliminated the Cas9- and the single-guide RNA (sgRNA)-encoding plasmids in one-step. Within 3 days, we successfully constructed an atrazine-degrading E. coli strain, thus further demonstrating the advantage of this new CRISPR-Cas9 system for bacterial genome editing.ConclusionsOur novel EXIT circuit, which exploits the homing endonuclease I-SceI, enables plasmid(s) with different replication origins to be eliminated from their host cells rapidly and efficiently. We also developed an easy-to-use CRISPR-Cas9 system with the EXIT circuit, and this new system can be widely applied to bacterial genome editing.

Susceptibility of chickens, quail, and pigeons to an H7N9 human influenza virus and subsequent egg-passaged strains

H7N9 human influenza virus A/Anhui/1/2013 (Anhui2013) showed low pathogenicity in chickens, quail, and pigeons, with quail being the most susceptible among the species tested. IVPIE1-1, which was recovered from a dead chicken after intravenous inoculation of Anhui 2013, had broader tissue tropism in chickens than did the original inoculum, as well as amino acid substitutions in the polymerase acidic gene and neuraminidase gene segments, but its pathogenicity was not enhanced. Viruses obtained after passage of Anhui 2013 in 10- and 14-day-old embryonated eggs showed rapid accumulation of amino acid substitutions at the receptor-binding site of the hemagglutinin protein. Two strains obtained through egg passage, 10E4/14E17 and 10E4/10E13, replicated better in intranasally infected chickens than did the original Anhui 2013 strain, yet the new isolates showed low pathogenicity in chickens despite their amino acid substitutions. The increased virus replication in chickens of 10E4/14E17 and 10E4/10E13 was not correlated with temperature-sensitive replication, given that virus replication was suppressed at increased temperatures. The existence of highly susceptible hosts, such as quail, which permit asymptomatic infection, facilitates increased mutation of the virus through amino acid substitution at the receptor-binding site, and this might be one of the mechanisms underlying the prolonged circulation of H7N9 influenza virus.

Editing of the Bacillus subtilis Genome by the CRISPR-Cas9 System.

The clustered regularly interspaced short palindromic repeat (CRISPR)-associated (Cas) systems are adaptive immune systems of bacteria. A type II CRISPR-Cas9 system from Streptococcus pyogenes has recently been developed into a genome engineering tool for prokaryotes and eukaryotes. Here, we present a single-plasmid system which allows efficient genome editing of Bacillus subtilis The plasmid pJOE8999 is a shuttle vector that has a pUC minimal origin of replication for Escherichia coli, the temperature-sensitive replication origin of plasmid pE194(ts) for B. subtilis, and a kanamycin resistance gene working in both organisms. For genome editing, it carries the cas9 gene under the control of the B. subtilis mannose-inducible promoter PmanP and a single guide RNA (sgRNA)-encoding sequence transcribed via a strong promoter. This sgRNA guides the Cas9 nuclease to its target. The 20-nucleotide spacer sequence at the 5' end of the sgRNA sequence, responsible for target specificity, is located between BsaI sites. Thus, the target specificity is altered by changing the spacer sequences via oligonucleotides fitted between the BsaI sites. Cas9 in complex with the sgRNA induces double-strand breaks (DSBs) at its target site. Repair of the DSBs and the required modification of the genome are achieved by adding homology templates, usually two PCR fragments obtained from both sides of the target sequence. Two adjacent SfiI sites enable the ordered integration of these homology templates into the vector. The function of the CRISPR-Cas9 vector was demonstrated by introducing two large deletions in the B. subtilis chromosome and by repair of the trpC2 mutation of B. subtilis 168. In prokaryotes, most methods used for scarless genome engineering are based on selection-counterselection systems. The disadvantages are often the lack of a suitable counterselection marker, the toxicity of the compounds needed for counterselection, and the requirement of certain mutations in the target strain. CRISPR-Cas systems were recently developed as important tools for genome editing. The single-plasmid system constructed for the genome editing of B. subtilis overcomes the problems of counterselection methods. It allows deletions and introduction of point mutations. It is easy to handle and very efficient, and it may be adapted for use in other firmicutes.

Targeted genome editing in the rare actinomycete Actinoplanes sp. SE50/110 by using the CRISPR/Cas9 System

The application of genome editing technologies, like CRISPR/Cas9 for industrially relevant microorganisms, is becoming increasingly important. Compared to other methods of genetic engineering the decisive factor is that CRISPR/Cas9 is relatively easy to apply and thus time and effort can be significantly reduced in organisms, which are otherwise genetically difficult to access. Because of its many advantages and opportunities, we adopted the CRISPR/Cas9 technology for Actinoplanes sp. SE50/110, the producer of the diabetes type II drug acarbose. The functionality of genome editing was successfully shown by the scarless and antibiotic marker-free deletion of the gene encoding the tyrosinase MelC, which catalyzes the formation of the dark pigment eumelanin in the wild type strain. The generated ΔmelC2 mutant of Actinoplanes sp. SE50/110 no longer produces this pigment and therefore the supernatant does not darken. Furthermore, it was shown that the plasmid containing the gene for the Cas9 protein was removed by increasing the temperature due to its temperature-sensitive replication. The precision of the intended mutation was proven and possible off-target effects caused by the genome editing system were ruled out by genome sequencing of several mutants.

A BioBrick™-Compatible Vector for Allelic Replacement Using the XylE Gene as Selection Marker.

BackgroundCircular plasmid-mediated homologous recombination is commonly used for marker-less allelic replacement, exploiting the endogenous recombination machinery of the host. Common limitations of existing methods include high false positive rates due to mutations in counter-selection genes, and limited applicability to specific strains or growth media. Finally, solutions compatible with physical standards, such as the BioBrick™, are not currently available, although they proved to be successful in the design of other replicative or integrative plasmids.FindingsWe illustrate pBBknock, a novel BioBrick™-compatible vector for allelic replacement in Escherichia coli. It includes a temperature-sensitive replication origin and enables marker-less genome engineering via two homologous recombination events. Chloramphenicol resistance allows positive selection of clones after the first event, whereas a colorimetric assay based on the xylE gene provides a simple way to screen clones in which the second recombination event occurs. Here we successfully use pBBknock to delete the lactate dehydrogenase gene in E. coli W, a popular host used in metabolic engineering.ConclusionsCompared with other plasmid-based solutions, pBBknock has a broader application range, not being limited to specific strains or media. We expect that pBBknock will represent a versatile solution both for practitioners, also among the iGEM competition teams, and for research laboratories that use BioBrick™-based assembly procedures.Electronic supplementary materialThe online version of this article (doi:10.1186/s12575-016-0036-z) contains supplementary material, which is available to authorized users.

Specificity in suppression of SOS expression by recA4162 and uvrD303

Detection and repair of DNA damage is essential in all organisms and depends on the ability of proteins recognizing and processing specific DNA substrates. In E. coli, the RecA protein forms a filament on single-stranded DNA (ssDNA) produced by DNA damage and induces the SOS response. Previous work has shown that one type of recA mutation (e.g., recA4162 (I298V)) and one type of uvrD mutation (e.g., uvrD303 (D403A, D404A)) can differentially decrease SOS expression depending on the type of inducing treatments (UV damage versus RecA mutants that constitutively express SOS). Here it is tested using other SOS inducing conditions if there is a general feature of ssDNA generated during these treatments that allows recA4162 and uvrD303 to decrease SOS expression. The SOS inducing conditions tested include growing cells containing temperature-sensitive DNA replication mutations (dnaE486, dnaG2903, dnaN159, dnaZ2016 (at 37°C)), a del(polA)501 mutation and induction of Double-Strand Breaks (DSBs). uvrD303 could decrease SOS expression under all conditions, while recA4162 could decrease SOS expression under all conditions except in the polA strain or when DSBs occur. It is hypothesized that recA4162 suppresses SOS expression best when the ssDNA occurs at a gap and that uvrD303 is able to decrease SOS expression when the ssDNA is either at a gap or when it is generated at a DSB (but does so better at a gap).

Size unlimited markerless deletions by a transconjugative plasmid-system in Bacillus licheniformis

Conjugative shuttle vectors of the pKVM series, based on an IncP transfer origin and the pMAD vector with a temperature sensitive replication were constructed to establish a markerless gene deletion protocol for Bacilli without natural competence such as the exoenzyme producer Bacillus licheniformis. The pKVM plasmids can be conjugated to strains of B. licheniformis and B. subtilis. For chromosomal gene deletion, regions flanking the target gene are fused and cloned in a pKVM vector prior to conjugative transfer from Escherichia coli to B. licheniformis. Appropriate markers on the vector backbone allow for the identification of the integration at the target locus and thereafter the vector excision, both events taking place via homologous recombination. The functionality of the deletion system was demonstrated with B. licheniformis by a markerless 939bp in-frame deletion of the yqfD gene and the deletion of a 31kbp genomic segment carrying a PBSX-like prophage.

Mycobacteria에 적용 가능한 genetic tool로서의 새로운 vector system 개발

The genus Mycobacterium includes crucial animal and human pathogens such as Mycobacterium tuberculosis, Mycobacterium leprae, and Mycobacterium bovis. Although it is important to understand the genetic basis for their virulence and persistence in host, genetic analysis in mycobacteria was hampered by a lack of sufficient genetic tools. Therefore, many functional vectors as molecular genetic tools have been designed for understanding mycobacterial biology, and the application of these tools to mycobacteria has accelerated the study of mechanisms involved in virulence and gene expression. To overcome the pre-existing problems in genetic manipulation of mycobacteria, this paper reports new vector systems as effective genetic tools in Mycobacterium smegmatis. Three vectors were developed; pKOTs is a suicide vector for mutagenesis containing a temperature-sensitive replication origin (TSRO) and the sacB gene encoding levansucrase as a counterselectable marker. pMV306lacZ is an integrative lacZ transcriptional fusion vector that can be inserted into chromosomal DNA by site-specific recombination. pTnMod-OKmTs is a minitransposon vector harboring the TSRO that can be used in random mutagenesis. It was demonstrated in this study that these vectors effectively worked in M. smegmatis. The vector systems reported here are expected to successfully applicable to future research of mycobacterial molecular genetics.

Charged Residues in Hepatitis C Virus NS4B Are Critical for Multiple NS4B Functions in RNA Replication

The nonstructural 4B (NS4B) protein of hepatitis C virus (HCV) plays a central role in the formation of the HCV replication complex. To gain insight into the role of charged residues for NS4B function in HCV RNA replication, alanine substitutions were engineered in place of 28 charged residues residing in the N- and C-terminal cytoplasmic domains of the NS4B protein of the HCV genotype 1b strain Con1. Eleven single charged-to-alanine mutants were not viable, while the remaining mutants were replication competent, albeit to differing degrees. By selecting revertants, second-site mutations were identified for one of the lethal NS4B mutations. Second-site mutations mapped to NS4B and partially suppressed the lethal replication phenotype. Further analyses showed that three NS4B mutations disrupted the formation of putative replication complexes, one mutation altered the stability of the NS4B protein, and cleavage at the NS4B/5A junction was significantly delayed by another mutation. Individual charged-to-alanine mutations did not affect interactions between the NS4B and NS3-4A proteins. A triple charged-to-alanine mutation produced a temperature-sensitive replication phenotype with no detectable RNA replication at 39°C, demonstrating that conditional mutations can be obtained by altering the charge characteristics of NS4B. Finally, NS4B mutations dispensable for efficient Con1 RNA replication were tested in the context of the chimeric genotype 2a virus, but significant defects in infectious-virus production were not detected. Taken together, these findings highlight the importance of charged residues for multiple NS4B functions in HCV RNA replication, including the formation of a functional replication complex.

Human body temperature and new approaches to constructing temperature-sensitive bacterial vaccines

Many of the live human and animal vaccines that are currently in use are attenuated by virtue of their temperature-sensitive (TS) replication. These vaccines are able to function because they can take advantage of sites in mammalian bodies that are cooler than the core temperature, where TS vaccines fail to replicate. In this article, we discuss the distribution of temperature in the human body, and relate how the temperature differential can be exploited for designing and using TS vaccines. We also examine how one of the coolest organs of the body, the skin, contains antigen-processing cells that can be targeted to provoke the desired immune response from a TS vaccine. We describe traditional approaches to making TS vaccines, and highlight new information and technologies that are being used to create a new generation of engineered TS vaccines. We pay particular attention to the recently described technology of substituting essential genes from Arctic bacteria for their homologues in mammalian pathogens as a way of creating TS vaccines.

Molecular studies of temperature-sensitive replication of the cold-adapted B/Ann Arbor/1/66, the master donor virus for live attenuated influenza FluMist ® vaccines

Cold-adapted ( ca) B/Ann Arbor/1/66 is the master donor virus for influenza B (MDV-B) vaccine component of live attenuated influenza FluMist ® vaccine. The six internal protein gene segments of MDV-B confer the characteristic cold-adapted ( ca), temperature-sensitive ( ts) and attenuated ( att) phenotypes to the reassortant vaccine strains that contain the HA and NA RNA segments from the circulating wild type strains. Previously, we have mapped the loci in the NP, PA and M genes that determine the ca, ts and att phenotypes of MDV-B. In this report, the ts mechanism of MDV-B was described by comparing replication of MDV-B with its wild type counterpart at permissive and restricted temperatures. We showed that the PA and NP proteins of MDV-B are defective in RNA polymerase function at the restricted temperature of 37 °C resulting in greatly reduced viral RNA and protein synthesis. In addition, the two M1 residues, Q159 and V183 that are unique to MDV-B, contribute to reduced virus replication at temperatures greater than 33 °C, possibly due to the reduced M1 membrane association and its reduced virion M1 incorporation. Thus, the previously identified MDV-B loci not only reduce viral polymerase function at the restricted temperature but also affect virus assembly and release.

Phenotypic properties resulting from directed gene segment reassortment between wild-type A/Sydney/5/97 influenza virus and the live attenuated vaccine strain

Widespread use of a live-attenuated influenza vaccine (LAIV) in the United States (licensed as FluMist) raises the possibility that vaccine viruses will contribute gene segments to the type A influenza virus gene pool. Progeny viruses possessing new genotypes might arise from genetic reassortment between circulating wild-type (wt) and vaccine strains, but it will be difficult to predict whether they will be viable or exhibit novel properties. To begin addressing these uncertainties, reverse-genetics was used to generate 34 reassortant viruses derived from wt influenza virus A/Sydney/5/97 and the corresponding live vaccine strain. The reassortants contained different combinations of vaccine and wt PB2, PB1, PA, NP, M, and NS gene segments whereas all strains encoded wt HA and NA glycoproteins. The phenotypes of the reassortant strains were compared to wt and vaccine viruses by evaluating temperature-sensitive ( ts) plaque formation and replication attenuation ( att) in ferrets following intranasal inoculation. The results demonstrated that the vaccine virus PB1, PB2, and NP gene segments were dominant when introduced into the wt A/Sydney/5/97 genetic background, producing recombinant viruses that expressed the ts and att phenotypes. A dominant attenuated phenotype also was evident when reassortant strains contained the vaccine M or PA gene segments, even though these polypeptides are not temperature-sensitive. Although the vaccine M and NS gene segments typically are not associated with temperature sensitivity, a number of reassortants containing these vaccine gene segments did exhibit a more restricted ts phenotype. Overall, no reassortant strains were more virulent than wt, and in fact, 33 of the 34 recombinant viruses replicated less efficiently in infected ferrets. These results suggest that genetic reassortment between wt and vaccine strains is unlikely to produce viruses having novel properties that differ substantially from either progenitor, and that the likely outcome of reassortment will be attenuated viruses.

Net replication of Salmonella enterica serovars Typhimurium and Choleraesuis in porcine intestinal mucosa and nodes is associated with their differential virulence.

Salmonella enterica is a facultative intracellular pathogen of worldwide importance and causes a spectrum of diseases depending on serovar- and host-specific factors. Oral infection of pigs with S. enterica serovar Typhimurium strain 4/74 produces acute enteritis but is rarely fatal, whereas serovar Choleraesuis strain A50 causes systemic disease with a high mortality rate. With a porcine ligated ileal loop model, we observed that systemic virulence of serovar Choleraesuis A50 is not associated with enhanced intestinal invasion, secretory responses, or neutrophil recruitment compared to serovar Typhimurium 4/74. The net growth in vivo of serovar Choleraesuis A50 and serovar Typhimurium 4/74 was monitored following oral inoculation of pigs with strains harboring pHSG422, which exhibits temperature-sensitive replication. Analysis of plasmid partitioning revealed that the enteric virulence of serovar Typhimurium 4/74 relative to that of serovar Choleraesuis A50 is associated with rapid replication in the intestinal wall, whereas systemic virulence of serovar Choleraesuis A50 is associated with enhanced persistence in intestinal mesenteric lymph nodes. Faster replication of serovar Typhimurium, compared to that of serovar Choleraesuis, in the intestinal mucosa was associated with greater induction of the proinflammatory cytokines tumor necrosis factor alpha, interleukin-8 (IL-8), and IL-18 as detected by reverse transcriptase PCR analysis of transcripts from infected mucosa. During replication in batch culture and porcine alveolar macrophages, transcription of genes encoding components of type III secretion systems 1 (sipC) and 2 (sseC) was observed to be significantly higher in serovar Typhimurium 4/74 than in serovar Choleraesuis A50, and this may contribute to the differences in epithelial invasion and intracellular proliferation. The rapid induction of proinflammatory responses by strain 4/74 may explain why pigs confine serovar Typhimurium infection to the intestines, whereas slow replication of serovar Choleraesuis may enable it to evade host innate immunity and thus disseminate by stealth.

Control and Regulation of KplE1 Prophage Site-specific Recombination

KplE1 is one of the 10 prophage regions of Escherichia coli K12, located at 2464 kb on the chromosome. KplE1 is defective for lysis, but it is fully competent for excisive recombination. In this study, we have mapped the binding sites of the recombination proteins, namely IntS, TorI, and IHF on attL and attR, and the organization of these sites suggests that the intasome is architecturally different from the lambda canonical form. We also measured the relative contribution of these proteins to both excisive and integrative recombination by using a quantitative in vitro assay. These experiments show a requirement of the TorI excisionase for excisive recombination and of the IntS integrase for both integration and excision. Moreover, we observed a strong influence of the supercoiled state of the substrates. The KplE1 recombination module, composed of the integrase and excisionase genes together with the attL and attR DNA regions, is highly similar to that of several phages infecting various E. coli strains as well as Shigella flexneri and Shigella sonnei. The in vitro recombination data reveal that HK620 and KplE1 att sequences are exchangeable. This study thus defines a new site-specific recombination module, and implications for the mechanism and regulation of recombination are discussed.

A novel function of DNA polymerase ζ regulated by PCNA

DNA polymerase zeta (Polzeta) participates in translesion DNA synthesis and is involved in the generation of the majority of mutations induced by DNA damage. The mechanisms that license access of Polzeta to the primer terminus and regulate the extent of its participation in genome replication are poorly understood. The Polzeta-dependent damage-induced mutagenesis requires monoubiquitination of proliferating cell nuclear antigen (PCNA) that is triggered by exposure to mutagens. We show that Polzeta contributes to DNA replication and causes mutagenesis not only in response to DNA damage but also in response to malfunction of normal replicative machinery due to mutations in replication genes. These replication defects lead to ubiquitination of PCNA even in the absence of DNA damage. Unlike damage-induced mutagenesis, the Polzeta-dependent spontaneous mutagenesis in replication mutants is reduced in strains defective in both ubiquitination and sumoylation of Lys164 of PCNA. Additionally, studies of a PCNA mutant defective for functional interactions with Polzeta, but not for monoubiquitination by the Rad6/Rad18 complex demonstrate a role for PCNA in regulating the mutagenic activity of Polzeta separate from its modification at Lys164.