Teleseismic Receiver Function Analysis Research Articles

Moho Depth and Crustal Velocity Structure Beneath Stations RTC and TAM from Teleseismic Receiver-Function Analysis

We apply the P-wave receiver-function technique to invert teleseismic data to investigate the S- wave velocity structure beneath stations RTC and TAM in West Africa. Teleseismic waveform receiver function analysis is a widely used technique for studying crustal structure beneath broadband seismic stations. Our results show that the crust beneath RTC is relatively complex with large velocity fluctuations. In the upper crust, a low velocity layer extends from 8 to 12 km deep. At Tamanrasset crustal structure east and west of the station differ. We find a high-velocity zone between 2 and 8 km to the east that we attribute to a high conductivity unit corresponding to intrusions described in the literature. We find no similar feature west of the station. Our velocity models for RTC and TAM are consistent with their differing tectonic environments. TAM, on a stable craton, displays a fairly homogeneous velocity structure while RTC, on thick sediments in an ocean-continent transition zone, has more heterogeneous structure. This structural difference is reflected as well by the depth to Moho, ~20 km at RTC and nearly 38 km at TAM, although both have gradational velocity increases with depth.

Characterization of anisotropy in basin-scale subsurface using teleseismic receiver function analysis

Teleseismic receiver function (RF) analysis offers a passive-source analogue to detect impedance boundaries using the converted body waves generated by earthquakes. While the technique traditionally has targeted deep earth structures such as the Moho and transition zones, there is growing interest in assessing its applicability in basin-scale seismic characterization, ultimately aimed for onshore commercial integration as a cost-effective complement to existing active-source seismic surveys. Specifically, the conventional broadband seismometers used in global observational seismic experiments are not only logistically simple in terms of data acquisition, but they also record ground motions in three mutually orthogonal time series, enabling effective detection of shear waves and directional variations of observed signals. Here, we perform teleseismic RF analysis to detect shear-wave anisotropy and related symmetry axes orientations in a basin setting, using open-source seismic data recorded at 55 closely spaced seismic stations in the LaBarge Passive Seismic Experiment deployed in Wyoming between November 2008 and June 2009. We find that the strengths and geometry of the observed anisotropy are variable along the array. Significantly, not only can anisotropy effectively delineate subsurface fault interfaces, it can also substantiate and reveal additional interpretable signals that are otherwise disregarded. The estimated fast axes orientations compare favorably with the complex fracture systems documented in the region. Finally, we show that P-to-S amplitude variations with P incidence are systematic and modelable using existing computational tools, offering an opportunity to develop an analysis technique similar to amplitude variation with offset with the products of RF analysis.

A Preliminary Results: Study of Crustal Structure in Cimandiri Fault Based on Teleseismic Receiver Function Analysis

West Java is one of the regions in Indonesia that has a complex geological structure caused by plate subduction in the south of Java Island. This resulted the formation structure of the main faults in West Java, including the Cimandiri Fault. The high level of seismicity on the Cimandiri Fault is interesting to be further researched to understand the structure of the Earth crustal, such as variations depth of the Moho layer and the determination of local velocity models of P and S waves. This study used receiver function analysis from teleseismic earthquake data with an epicentral distance of 30°-90° from the station location and magnitude ≥ 6. This study used 3 seismic stations belonging to the Meteorological, Climatological, and Geophysical Agency (BMKG) close to the Cimandiri Fault which are Sukabumi station (SKJI), Warung Kiara (WSJM), and Sukaraja (SSJM). The depth of the Moho layer at SKJI station is 34-36 km, WSJM station is 28-30 km, and SSJM station is 29-31 km which is located close to the segment from the Cimandiri Fault. A negative phase or decrease in speed was observed at the SKJI and WSJM stations which is estimated to come from the Cimandiri Fault structure which is at a depth of 17-19 km. Furthermore, the P wave velocity model at the three stations is at an interval of 7.6-8.6 km/s and the S wave velocity model is at an interval of 4.2-4.8 km/s.

Crustal structure and seismic anisotropy of rift basins in Somaliland

Rift margins provide insights into the processes governing the rupture of the continental lithosphere and the subsequence formation of sedimentary basins. The Proterozoic basement underlying Somaliland has been affected by multiple rifting; however, the crustal structure of these rifted basins remains unknown. This study utilized teleseismic receiver function analysis, Bayesian inversion, common conversion point imaging and 2D forward gravity modelling to examine the crust and upper mantle of Somaliland. The results indicate 36.8–38.2 km of crust in southern Somaliland, while the central and northern regions feature thinned crust (~ 21 km) with 5–6 km thick sediments. The joint analysis of radial and transverse components of receiver functions and shear wave splitting revealed fast axis directions trending to 50–56° in the upper mantle, indicating that azimuthal anisotropy is oriented in the regional Africa-Arabia plate motion. Such orientation may have resulted from lattice preferred orientation of olivine from the asthenospheric flow. Additionally, the fast polarization of the crust in central Somaliland is oriented at − 15°, indicating fossil deformation in the thinned crust related to the NW–SE trending Late Jurassic rift event. Further, the fast polarization for stations near the Gulf of Aden is oriented at 75–80°, suggesting crustal deformation associated with the Oligocene rift event. The crustal anisotropy at southern Somaliland revealed fast polarization oriented at − 85°, indicating a preserved far-field response of the WNW-ESE trending Late Cretaceous rift event. Overall, the study provides for the first-time insight into the rift-related extensional strain fabric in the crust and upper mantle anisotropy induced by asthenospheric flow in Somaliland.

Structure of the Gonghe Sedimentary Basin in the northeastern Tibetan Plateau: evidence from teleseismicPwaves recorded by a dense seismic array

SUMMARYThe Gonghe Basin in the northeast Tibetan Plateau presents significant potential for hot dry rock (HDR) geothermal resources. A 1990 Mw 6.4 earthquake in the basin furthers the need for an improved understanding of its sedimentary structure. In this study, we utilize data from a dense seismic array of 88 short-period seismometers deployed at an interstation spacing of approximately 3 km to scrutinize the sedimentary structure of the Gonghe Basin. By analysing teleseismic P waveforms, we identify P-to-S converted waves (Ps wave) originating from the sedimentary basement. We then determine the delay time between the Ps waves and the direct P waves (P wave) through waveform cross-correlation. By integrating this delay time with empirical velocity structure models, HDR borehole data and results from teleseismic receiver function analysis, we derive a sediment thickness model of the Gonghe Basin for the Qabqa geothermal area. Our findings reveal a gradual increase in sediment thickness from around 500 m in the east to approximately 3000 m in the west, which is consistent with other geophysical surveys and borehole data. The thick sediments in the basin could potentially serve as an excellent thermal storage cover for HDR. The strong ground motion simulation using our sediment thickness model shows that thick sediments can amplify seismic waves, increasing the risk of seismic hazards. Moreover, our study indicates that the clear Ps waves can be effectively extracted to construct a dependable sediment thickness model using teleseismic P waves recorded by a short-period dense seismic array.

New insights on Moho depth and regional lithospheric structure of central Oklahoma based on receiver function analysis from dense seismic networks

Knowledge of the midcontinent crustal structure of North America is crucial for understanding the evolutionary history of the ancient North American craton as Laurentia grew through accretion ∼1.5 Ga to 1 Ga. Although Oklahoma has been recognized as a tectonically stable region since the Phanerozoic, its crustal structure records the earlier formation of the Mazatzal and southern Granite-Rhyolite provinces 1.6 Ga to 1.4 Ga. We present results from teleseismic receiver function analysis applied to 221 events recorded on 169 broadband stations in central Oklahoma. Our findings include a Moho depth map of central Oklahoma based on stacked and depth-converted teleseismic P receiver functions. The results are interpreted together with gravimetric and magnetic datasets and a recently established seismic velocity model of the crust.The Moho map shows a generally flat crust-mantle boundary in central Oklahoma with an average depth of 43.5 km while we observe a sudden thickening on the crust of the northwestern part of Oklahoma where the Moho deepens to over 50 km depth. We also find a Mid-lithosphere discontinuity at the upper-most mantle in north-central Oklahoma, presented as a negative phase deepening southeastward from 60 km to 80 km. We further observe an intracrustal discontinuity at the Nemaha uplift and Anadarko shelf regions in a depth range of 17–30 km. The hypothesis of the Mid-continent Rift (MCR) extending into Oklahoma is examined in terms of the crustal structure and Moho depth variation revealed by receiver functions. We do not find evidence of Moho structure or lower-crustal underplay characteristics similar to what has been discovered in the northern part of MCR, but the intracrustal discontinuity that deepens towards the hypothesized MCR region suggests upper-crustal volcanics potentially caused by the extended expansion regime of the failed rift near the south-most termination.

A preliminary results: study of crustal thickness in eastern part of Borneo, Indonesia from teleseismic receiver function analysis

The island of Borneo has relatively low seismic activity. However, the plan to relocate the capital city to the East Borneo region could potentially increase the population, making the area more vulnerable to earthquake occurrences. Therefore, this research aims to determine the depth of the Mohorovičić discontinuity layer, which will provide insights into the thickness of the Earth's crust, and model the local P and S wave velocities using the Inversion, Migration, and Stacking H-k methods. The data used consists of earthquake events with magnitudes greater than 6, located within a distance of 30° to 90° from 6 BMKG stations around the new capital of Indonesia. The research results indicate that the depth of the Mohorovičić discontinuity layer varies between 28 and 43 km. The model of P-wave velocities varies between 1.8 km/s to 9.1 km/s, while the model of S-wave velocities ranges from 1.0 km/s to 5.1 km/s.

Basin-scale subsurface characterization using single-station teleseismic receiver function analysis

Teleseismic receiver function (RF) analysis traditionally has targeted deep earth structures in the context of observational seismology, allowing the detection of converted seismic phases originating from major boundaries of impedance. Recent efforts to adapt this passive-source seismic imaging technique to basin-scale subsurface characterization have retrieved primary basin geometries and key stratigraphic boundaries by relying on densely deployed broadband seismometer networks. While accurate interpretation of RF time series on Earth benefitted from complementary subsurface constraints (e.g., core and well logs), lack of such resources and instrumental limitations must be considered in the context of planetary geophysics, where passive-source imaging may emerge as a key frontier exploration technique. Thus, it is important to establish an analysis framework in which observed RF signals are interpreted by relying on first-order suppositions about the physical properties of the underlying subsurface. In this work, we seek to simulate this approach in single-station scenarios and qualitatively examine the baseline information inferable from the RF time series. Our results suggest that signals observed in the sedimentary interval can be reasonably attributed to major impedance changes expected from the generalized lithostratigraphy of the local subsurface, including the transition to the underlying crust. We also find patterns of anisotropy-related directional variations in high-frequency signals as well as unique frequency-dependent responses likely associated with the depth and vertical dimension of converting boundaries. Together, these seismic observables enable inference of various geologic attributes within the underlying sedimentary unit, proving it to be a critical tool in future efforts of planetary exploration.

Across and along-strike crustal structure variations of the western Afar margin and adjacent plateau: Insights from receiver functions analysis

We used teleseismic receiver function analysis to image the crustal structure beneath 24 broadband seismic stations densely deployed along two profiles traversing different structural units across the western Afar margin. Our high-resolution receiver function results image pronounced spatial variations in the crustal structure along the profiles and provide improved insights to understand how strain is partitioned in the crust during rifting. Beneath the western plateau next to northern Afar, the crust is likely felsic-to-intermediate in composition (average Vp/Vs 1.74), with a step like thinning of the crust from an average of 38 km beneath the western plateau to an average of 22 km beneath the marginal graben. Consistently thicker crust is observed beneath the southern profile (central Afar), showing four distinct regions of uniform crustal thickness: 1) an average crustal thickness of 42 km beneath the western plateau; 2) 34 km beneath the foothills area; 3) 28 km beneath the marginal graben and the wide extensional basin and 4) 21 km beneath the central rift axis. We use crustal thickness results to estimate a stretching factor β of 2.2 and 2.7 for central Afar and northern Afar respectively. Our estimated values are lower than β > 3.0 predicted from plate reconstructions, and we interpret that the variations are best explained by 2–5 km magmatic addition into the crust. The crustal composition beneath the southern profile is more complex with elevated Vp/Vs ratios ranging between 1.79 and 1.85 beneath the western plateau and marginal graben. This is consistent with a greater mafic component and best explained by crust altered by intrusions due to significant pre and syn-rift magmatic activity. Abnormally high Vp/Vs ratios of more than 1.90 are observed beneath the axial rift zone of central Afar, which most likely suggests the localization of partial melt within the crust.

Crustal Structure Study in Lampung Region Using Teleseismic Receiver Function Analysis

Lampung region is seismically and volcanic active because located in subduction zone of Indo-Australian and Eurasian plate. We applied receiver function and stacking H-k analysis to estimate the crustal structure in Lampung region. We used teleseismic earthquake data (epicenter distance 30°-90°) and M>6 recorded at 3 seismic broadband stations owned by Agency for Meteorology Climatology and Geophysics (BMKG). Those stations are PSLI (located on Sebesi Island approximately 20 km from Anak Krakatau) represented volcanic arc zone, KASI (located on Kota Agung, Lampung) represented Sumatran Fault Zone and KLI (located on Kotabumi, Lampung) represented back-arc basin. Crustal thickness estimated at PSLI station 32-36 km, KASI station 36-40 km, and KLI station 30-36 km. Furthermore, in 3 stations P wave velocity estimated 4.1-11 km/s, S wave velocity 2.2-6.2 km/s, while vp/vs value estimated 1.7-2.05. We estimated Anak Krakatau volcano’s magma chamber beneath PSLI station in depth 16-30 km, Great Sumatran Fault structure in depth about 8-14 km beneath KASI station, and thick sediment layer about 4 km near surface beneath KLI station. This study result is expected to explain more detail crustal of Lampung region and can be useful for developing of BMKG’s seismic monitoring systems and other geophysical fields in future.

Seismological evidence of a dehydration reaction in the subducting oceanic crust beneath western Shikoku in southwest Japan

SUMMARYThe Philippine Sea plate (PHS) is subducting beneath southwest Japan from the Nankai Trough. In this region, deep low-frequency earthquakes/tremors (LFEs) are active and their epicentres are distributed along the downdip of the source region of M8-class earthquakes that have occurred every 100–150 yr. The LFE activity may potentially be strongly related to the occurrence of great earthquakes between tectonic plates. To investigate the structural features around the LFEs, we applied teleseismic receiver function (RF) analysis to the seismograms observed at permanent and temporal seismograph stations in western Shikoku and we detected seismological evidence of a slab dehydration reaction linked to LFE activity. Based on the first-order harmonic decomposition of RFs, we first estimated the average plunge azimuth of the PHS beneath western Shikoku. Considering the backazimuth dependence of converted phase amplitude, we constructed the cross-section of the radial component RFs, excluding the incoming waveform data from the updip directions of the dipping slab. In this profile, the parallel negative and positive P-to-S converted phase alignment within a distance of 10 km were imaged. These phase alignments corresponded to the top of the slab and the slab Moho discontinuity, respectively. At the northern side of the profile, the landward (continental) Moho was also detected. In the region where LFEs were actively distributed, both the landward Moho and slab surface were unclear. The second-order harmonic decomposition of RFs for several kilometres above the slab Moho indicated that the anisotropic symmetry axes suddenly changed at the southern limit of the LFE active region; the fast axes in the region were normal to the trench though axes in the southern area were parallel. According to the thermal and pressure condition, a phase transition with a dehydration reaction can occur in the oceanic crust near the southern edge of the LFE active region. Once the dehydration process advances, released water causes the serpentinization of the mantle material near the slab surface and the corresponding seismic velocity decreases. The impedance contrast decreases at the boundary between the lower crust and the mantle wedge, as well as that between the mantle wedge and oceanic crust; therefore, the amplitudes of the converted phases at these boundaries also become small. Considering that serpentinite ordinarily has strong anisotropy with a seismic fast axis direct to the shear direction, all features observed are evidence of the dehydration process in the flat slab.

Crustal shear-wave velocity structure in Western Java, Indonesia from analysis of teleseismic receiver functions

We analysed receiver functions from teleseismic events recorded at 11 broadband seismometers in the western part of Java Island, Indonesia. The stations are mostly located at three main geological environment including Northwest Java Basin, Bogor Zone, and Southern Mountains Arc. A total of about 341 receiver functions were computed using iterative time domain deconvolution. We derived shear-wave velocity structure and crustal Vp/Vs ratio by inverting stacked radial receiver functions using non-linear neighbourhood algorithm. Inversion results show sediment thickness varies between 1 and 2 km thick in Western Java. Our inversion shows that crustal thickness in this region varies between 25 and 32 km. Average crustal Vp/Vs ratio is estimated to be about 1.69–1.78. We hope the study may provide useful information for velocity model and crustal thickness for Indonesia region.

Crustal structure beneath Tierra del Fuego, Argentina, inferred from seismic P-wave receiver functions and ambient noise autocorrelations

We investigate the structure of the crust beneath the main island of Tierra del Fuego through a teleseismic receiver function analysis and ambient seismic noise autocorrelation using data of four available broad-band stations. The area is situated in a remote region of southern Argentina where the interaction between the South American and Scotia plates define the Magallanes-Fagnano Fault System. Crustal thickness, Vp/Vs ratios and S-wave velocity models were estimated using the H-k stacking method and the inversion of receiver functions with the Neighbourhood Algorithm. Furthermore, we applied an ambient seismic noise autocorrelation procedure to identify PmP Moho reflections at all stations. The three methods provide consistent estimates for the crustal thickness which ranges from about 24.5 km in the northern part of the Island to about 39.2 km in the south. The lowest and highest values of S-wave velocity found, in the most superficial layers of the crust, correlate with the presence of Tertiary and upper Cretacic sediments in the north and with older geological units composed by more consolidated lithologies in the south, respectively. Despite the diverse geological and tectonic settings present, our results do not change significantly for different parameters or subsidiary data sets, i.e., showing the robustness of our models which likely represent closely the local structure beneath the Island. This area is considered a very seismically active one and its crustal structure has been little explored demonstrating the importance of having new models and the necessity to increase the station coverage to allow a more detailed study of the region. Furthermore, the models presented here provide better constraints on the crustal structure, and will facilitate studies of the regional seismicity that can improve our understanding of the seismic hazard posed by earthquakes such as the magnitude 7.5 and 7.8 events that occurred in 1949.

Crustal Thickness and Composition Variation along the Western Ghats of India through Teleseismic Receiver Function Analysis

The crustal thickness and composition variation along the Western Ghats using analysis of the teleseismic receiver functions calculated on the 36 broadband seismic stations in and around the Western Ghats is presented. The results show that the crustal thickness is mostly 36 – 40 km beneath the Western Ghats. The seismic stations falling in the Western Ghats however, imaging the mid-Archean Nucleus of the Western Dharwar Craton and Nilgiri hills (ca. 2.2 km elevation) show a crustal thickness of 45 – 50 km beneath these regions. In general, the calculated Vp/Vs ratio is varying between 1.66 and 1.82 all along the Western Ghats. Most of the seismic stations show higher Vp/Vs ratio (> 1.8), an indicative of mafic composition, may be due to magmatic underplating below the Western Ghats. The lower value of Vp/Vs ratio (< 1.70) at few stations can be due to local heterogeneity beneath those stations. Based on calculated crustal properties, the portion of the Western Ghats falling in the Deccan Volcanic region is different from the remaining; and we believe that the portion of the Western Ghats falling in the Deccan Volcanic Province was probably modified by the crust-mantle interaction during tectono-magmatic event related with the Deccan volcanism.

Crustal properties of the northern Scandinavian mountains and Fennoscandian shield from analysis of teleseismic receiver functions

Supplementary data are available at GJ I online. https://academic.oup.com/gji/article-lookup/doi/10.1093/gji/ggy140#supplementary-data Figure S1. (a) Teleseismic events (Mw > 5.8) recorded by SCANLIPS2 between July 2007 and September 2009 for P-receiver function study. (b) Teleseismic events (Mw > 5.8) recorded by SCANLIPS3D between July 2013 and September 2014 for P-receiver function study. In both cases the blue star corresponds to the centre of the seismic array. Figure S2. (a) Synthetic P-receiver functions for a Moho depth of 43 km and Vp/Vs of 1.73 from three crustal models. In red, a model with two layers (upper and lower crust) for the crust and step discontinues. In green, a model with three layers (upper, lower crust and transitional Moho with highVp) and step discontinuities. In blue, a gradual model between upper crust and Moho. (b) Sensibility of amplitude of direct P arrival and Ps conversion for different slowness and for two crustal model (on the left a step Moho model and on the right a gradual Moho model). Table S1. Informations about seismic stations and number of events used in this study for each instruments (70XX: SCANLIPS2 -13XX: SCANLIPS3D). Table S2. Compilation of P-RFs analysis and previous works (Ottemoller & Midzi ¨ 2003; Olsson et al. 2008; Silvennoinen et al. 2014).

Shallow dipping structure associated to the Cimandiri Fault: evidence from single station teleseismic receiver function analysis

The Cimandiri fault zone is located in the eastern part of the boundary between the oblique subduction of the Indo-Australian plate along Sumatera and the frontal subduction along Java. Even though some geological and geophysical investigations have been conducted and focused on this area, the geometry of the fault zone remains poorly resolved. To provide better constraints on the geometry of the Cimandiri fault zone, we analyze teleseismic receiver functions from single permanent seismic station located in the fault zone. We observe that the computed receiver functions show back azimuthal variation in the amplitude converted waves at the first 2 second of receiver functions providing clear evidence for the presence of complicated shallow structure. We implement forward modelling technique using synthetic seismograms with the same parameters as the observed receiver functions. The modelling reveals at least 2 km thick low velocity zone dipping N-E at 30°, which might be correlated to the Cimandiri fault.

Crustal structure of north Peru from analysis of teleseismic receiver functions

In this study, we present results from teleseismic receiver functions, in order to investigate the crustal thickness and Vp/Vs ratio beneath northern Peru. A total number of 981 receiver functions were analyzed, from data recorded by 28 broadband seismic stations from the Peruvian permanent seismic network, the regional temporary SisNort network and one CTBTO station. The Moho depth and average crustal Vp/Vs ratio were determined at each station using the H-k stacking technique to identify the arrival times of primary P to S conversion and crustal reverberations (PpPms, PpSs + PsPms). The results show that the Moho depth correlates well with the surface topography and varies significantly from west to east, showing a shallow depth of around 25 km near the coast, a maximum depth of 55–60 km beneath the Andean Cordillera, and a depth of 35–40 km further to the east in the Amazonian Basin. The bulk crustal Vp/Vs ratio ranges between 1.60 and 1.88 with the mean of 1.75. Higher values between 1.75 and 1.88 are found beneath the Eastern and Western Cordilleras, consistent with a mafic composition in the lower crust. In contrast values vary from 1.60 to 1.75 in the extreme flanks of the Eastern and Western Cordillera indicating a felsic composition. We find a positive relationship between crustal thickness, Vp/Vs ratio, the Bouguer anomaly, and topography. These results are consistent with previous studies in other parts of Peru (central and southern regions) and provide the first crustal thickness estimates for the high cordillera in northern Peru.

Slab segmentation controls the interplate slip motion in the SW Hellenic subduction: New insight from the 2008Mw 6.8 Methoni interplate earthquake

AbstractWe present an integrated approach of the seismic structure and activity along the offshore SW Hellenic subduction from combined observations of marine and land seismic stations. Our imaging of the slab top topography from teleseismic receiver function analysis at ocean bottom seismometers supports a trenchward continuation of the along‐dip slab faults beneath the Peloponnesus. We further show that their morphostructural control accounts for the backstepping of the thrust contact of the Mediterranean Ridge accretionary wedge over the upper plate. Local seismic activity offshore SW Peloponnesus constrained by ocean bottom seismometer observations reveals a correlation with specific features of the forearc: the Matapan Troughs. We study theMw 6.8 14.02.2008 interplate earthquake offshore SW Peloponnesus and show that its nucleation, rupture zone, and aftershocks sequence are confined to one slab panel between two adjacent along‐dip faults and are thus controlled by not only the offshore slab top segmentation but also the upper plate sea‐bottom morphology.

Geophysical-petrological modelling of the East Greenland Caledonides – Isostatic support from crust and upper mantle

Teleseismic receiver function analysis imaged a complex upper mantle structure in the Central Fjord Region of East Greenland, including an east-dipping high velocity layer and a mantle wedge of high crustal or low mantle velocities. This was interpreted as a fossil Caledonian subduction complex, including a slab of eclogitised mafic crust and an overlying wedge of serpentinised mantle. In this paper, we use a multi-disciplinary geophysical and petrological modelling approach to test this proposed fossil subduction model.The consistency of the obtained velocity model with the regional gravity field is tested by forward density modelling and isostatic calculations. The models show that the sub-crustal structure, given by the more buoyant mantle wedge and the dipping high velocity/density layer, yield in a markedly better fit as compared to a homogeneous mantle lithosphere.Petrological-geophysical modelling is performed by testing different upper mantle compositions with regard to topography, gravity and seismic velocities using Litmod2D. This suggests that the observed lower crustal/uppermost mantle bodies could be a combination of mafic intrusions, serpentinised peridotite and metamorphosed mafic crust. The preferred composition for the dipping structure is eclogitised mafic crust, and hydrated peridotite filling the overlying mantle wedge. Models lacking an eclogite layer or a hydrated upper mantle composition show an inferior fit and, therefore, are not favoured representatives. This supports the interpretation as a fossil subduction zone complex. The spatial relations with Caledonian structures suggest an early Caledonian origin.

Segmented Hellenic slab rollback driving Aegean deformation and seismicity

AbstractThe NE dipping slab of the Hellenic subduction is imaged in unprecedented detail using teleseismic receiver function analysis on a dense 2‐D seismic array. Mapping of slab geometry for over 300 km along strike and down to 100 km depth reveals a segmentation into dipping panels by along‐dip faults. Resolved intermediate‐depth seismicity commonly attributed to dehydration embrittlement is shown to be clustered along these faults. Large earthquakes occurrence within the upper and lower plate and at the interplate megathrust boundary show a striking correlation with the slab faults suggesting high mechanical coupling between the two plates. Our results imply that the general slab rollback occurs here in a differential piecewise manner imposing its specific stress and deformation pattern onto the overriding Aegean plate.