Telecommunications Technology Association Research Articles

Investment Priority Analysis of ICS Information Security Resources in Smart Mobile IoT Network Environment Using the Analytic Hierarchy Process

The industrial control system (ICS) inherits the attributes of the traditional information system, but because it has its own characteristics that availability of triad (CIA) of information security should be a top priority, it needs to be set differently from the traditional information security requirements. In response to the issue, TTAK.KO-12.0307 (Standard for Industrial Control System Information Security Requirements) proposed by the National Security Research Institute (NSRI) and established by the Telecommunications Technology Association (TTA) is being used. However, it is difficult to apply security requirements of TTAK.KO-12.0307 uniformly because of the reason that the characteristics of the ICS in each layer are different. There is also a limit to invest the security resources with equivalent priority for all requirements and ICS layers. It is still unresolved in the previous research studies which are related to information security resources, for example, Choi (2013), Ko et al. (2013), and Nah et al.’s (2016) studies. Therefore, this study tried to focus on what a top priority of information security requirements by the ICS in each layer is, using the analytic hierarchy process. As a result, we derived that the top priority requirement in the operation layer is “Identification Authentication Access Control,” in the control layer is “Event Response,” and in the field device layer is “Physical Interface Protection” with the highest importance. The results of this study can be utilized as a guideline for the security strategy and policy design by determining security requirements that should be prioritized in each layer of the ICS.

Design of Synchronization and T-STD Model for 3DTV Service over Hybrid Networks

The objective of digital broadcasting has evolved from providing a plain video service to offering a realistic visual experience. Technologies such as 3DTV and UHDTV have been suggested to achieve this new objective by providing an immersive and stereoscopic visual experience. However, owing to the high bandwidth requirements of such services, the broadcasting industry has faced a challenge to find a new transport mechanism for overcoming the bandwidth limitation. The standardization organizations, the Advanced Television Systems Committee, Digital Video Broadcasting, and Telecommunications Technology Association, have been working on the integration of broadcasting and a broadband network (IP) to resolve the bandwidth issue of realistic video services. This paper introduces a frame-level timeline synchronization and transport system target decoder model for providing a stable 3DTV service over a hybrid network. The experimental results indicate that the proposed technologies can be successfully adopted as a reference model in a broadcast-broadband hybrid 3DTV service and other IP-associated hybrid broadcasting services.

A Study on the WIPI-to-Tizen Converter for Smart Game Contents Compatibility

The WIPI (Wireless Internet Platform for Interoperability) is legislated by KWISF (Korea Wireless Internet Standardization Forum) and a standardized standard chosen by KTTA (Korea Telecommunications Technology Association) as an application program execution environment for mobile communication platforms. Tizen platform developed by Samsung is an open source smart phone platform, which is created for wide range of device. which is created for wide range of device. Due to the use of different smart phone platforms, mobile contents developers must create content designed specifically for each platform or use a conversion process to provide game content to consumers. In this paper, to resolve this problem, the WIPI-to-Tizen smart game converter was designed to automatically translate game contents from the WIPI platform to the Tizen platform for smart phones. Through the WIPI-to-Tizen converter, resources such as images and sounds can be converted, APIs can be converted using a platform mapping engine. These and all other content conversion functions were examined. Test results indicate that the graphics, image, sound, and other functions of converted Tizen games were equivalent to those of the WIPI games before conversion.

유헬스 표준용어 및 용어 표준화 가이드라인 개발

유헬스 산업 활성화를 위해서 유헬스와 관련된 용어의 이해를 돕고, 의사소통을 증진시키기 위한 유헬스 표준용어를 개발할 필요가 있다. 본 연구의 목적은 유헬스 표준용어를 개발하고, 이를 위한 용어 표준화 절차에 대한 지침을 제시하는 것이다. 본 연구에서는 유헬스 관한 보고서, 용어집 및 정보통신기술협회 표준을 대상으로 자료수집, 용어추출, 용어정제, 용어선정 및 용어관리 절차를 통해 최종 187개의 유헬스 표준용어를 개발하였다. 연구결과, 국내 실정에 부합하는 유헬스 용어 표준화를 위한 지침을 제시하였으며, 이는 유헬스 표준용어의 정의, 분류, 구성요소, 절차에 따른 방법 및 원칙에 대한 상세한 내용을 포함하였다. 본 연구에서 제시된 유헬스 표준용어 및 용어 표준화 가이드라인은 개별 용어 도입 및 관리를 위한 비용을 절감하고, 정보교환을 용이하도록 도움으로써 유헬스 산업 전반의 효율성을 향상시킬 것이다.

4S 다중매체 스위칭 서버와 육해상 정보교환 시스템 개발

선박표준 네트워크는 2005년 IMO MSC 제 81차 회의에서 e-navigation을 공동 의제로 제출되었다. 2006년 MSC 81의 WG 프로그램으로 승인된 후 2008년까지 e-navigation 구현전략을 수립하기로 결정됨으로써 선박 네트워크의 표준화 작업은 본격화되었다. 이는 선박의 안전 항해 뿐 아니라 400여종의 이기종 항해통신장비 및 기관 장비를 탑재하는 선박에서의 효율적인 정보 교환을 지원하기 위한 것이기도 하다. 그 가운데 4S 네트워크는 육상과 선박, 선박과 선박사이의 무선통신을 말하며 선박과 육상 간 통신채널을 항상 연결하도록 해주는 기본이 된다. 4S 네트워크는 이를 기반으로 다양한 서비스를 제공할 수 있는 많은 활용 분야가 존재하기 때문에 향후 e-navigation이 적용되면 다양한 시장 창출이 가능할 것으로 보이나 현재 이에 대한 구체적인 기반 기술 연구나 시제품 개발은 전무한 상태이다. 본 논문에서는 육해상간 효율적이고 저렴한 통신환경을 제공하도록 하는 4S 다중매체 스위칭 서버와 육해상 정보교환 시스템을 개발하고, 구현한 시스템의 성능을 TTA(Telecommunications Technology Association) V&V(Verification and Validation) 인증을 통해 확인하였다. Ship Standard Network was submitted as a common subject of e-navigation by 81th IMO MSC 2005. This agenda was given an official status with strategy planning of e-navigation for Ship Standard Network after approval of WG program of 81th MSC 2006. Nowadays approximately 400 heterogeneous navigation and communication equipments are working on ships at sea. Standardization of ship network is to support exchanging various data efficiently. Among them, 4S network is defined as a wireless communication network between ship to ship and ship to shore which provides unceasing communication channel ship to shore. It has been expected to trigger various services and applications based on 4S network. However, no technologies and products has been appeared at fields yet. but now there's not specific technologies and developing products. In this paper, We developed a 4S multiple media switching server and a ship-land information exchange system to overcome the heterogeneity and provide efficient communication environments.. The performance of the implemented system was verified by TTA(Telecommunications Technology Association) V&V(Verification and Validation).

전자책 DRM을 위한 자동화된 표준정합성 검사 시스템에 관한 연구

The study of the compatibility of EPUB DRM, granted by the Korea Copyright Commission, as a CT R & D project (Project Title: The Development of the standard reference software technology for International Standard EPUB-based eBook DRM) developed standards such as profile standards for encryption digital signature and authentication certificates and standards for technical terms of rights information. In 2012, these four standards have been established as the Korean Industrial Standards under the names of `Encryption specification for EPUB DRM,` `the Digital signature specification for EPUB DRM,` `the Certificate specification for EPUB DRM,` and `Definitions of Right Terms for EPUB DRM` through the ODPF(Open Digital Standardization Forum) and the TTA(Telecommunications Technology Association). The research project also proposed standards of ebook DRM license protocols in order for the four standards to practically apply to ebook DRM compatibility. It is necessary for technology standards to require a compatibility standard test process for testing whether implementations which were developed on the basis of the standard specification, comply with standards. This study suggests an automated compatible standard test method and a test model under the ebook DRM standard technical specification.

EPUB 기반 전자책 DRM의 상호호환성을 지원하는 라이선스 발급 방법에 관한 연구

The study of the compatibility of EPUB DRM, granted by the Korea Copyright Commission, as a CT R & D project (Project Title: Development of standard reference software technology for the International Standard EPUB-based eBook DRM) developed standards such as profile standards for encryption, digital signature and authentication certificates and standards for technical terms of rights information. In 2012, these four standards have been established as the Korean Industrial Standards under the names of `Encryption specification for EPUB DRM`, `the Digital signature specification for EPUB DRM`, `the Certificate specification for EPUB DRM`, and `Definitions of Right Terms for EPUB DRM` through the ODPF(Open Digital Standardization Forum) and the TTA(Telecommunications Technology Association). In spite of the establishment of the eBook DRM standards, however, the absence of the standard technology which supports the compatibility for issues and changes of licenses makes it unable to use eBooks served by different eBook distributors. This study tries to investigate technological approaches to methods of license issues supporting eBook DRM compatibility on the basis of the above-mentioned four EPUB DRM standards and to provide an industrially accepted technological model.

IPTV 단말 프로비저닝 절차의 구현과 표준화에 관한 연구

To boost the IPTV industry, it has being considered to provide terminal portability from one service provider to another for users. If the terminal portability is guaranteed, then a service user can purchase an IPTV terminal in a market and select an IPTV service provider. For this, the IPTV terminal should process a series of pre-configuration, so called provisioning procedure. Telecommunications Technology Association (TTA) established the standard of IPTV terminal provisioning procedure, TTAK.KO-08.0026. In this paper, we explain the revised standard TTAK.KO-08.0026/R2, and introduce the architecture, functions, operating procedures and parameters of the IPTV terminal provisioning system that we implemented based on it. Finally, we discuss the future issues of the standard of the IPTV terminal provisioning procedure.

OGC 기반의 센서 네트워크 서비스 분석 연구

USN(Ubiquitous Sensor Network) is a core infrastructure that u-life use to enable the realization in the ubiquitous society through various services of area such as u-city, u-Health. Therefore, we need a research for domestic standards to establish USN technique. Currently, status of USN standards is most standard and research that it is a technology for sensor node implementation and a protocol for energy-efficient communication and interlock with existing network. But, Standard and research for sensor network and integration management of heterogeneous sensor networks for USN application and sensing data management and USN database structure definition such as application and middleware is weak level. In this paper, we researched for standard development of domestic a sensor network and the relevant standard analysis to configure SWE(Sensor Web Enablement) of OGC(Open Geospatial Consortium) for standarded plattform technology. Also we researched that it`s a connection between domestic ITA(Telecommunications Technology Association) standards and SWE Standard.

안전한 WiBro 서비스를 위한 PSD(Power Support Device) 기반 인증 프로토콜

사용자가 안전한 WiBro 서비스를 받기 위해서 사용자 단말과 ACR(Access Control Router) 간에 인증이 선행되어야 한다. 그렇지 않을 경우, 많은 공격 위험으로부터 노출될 수 있다. 따라서 한국정보통신기술협회(TTA)에서는 휴대인터넷(와이브로) 서비스를 위한 상호 인증 절차 표준을 제정하였다. 이 표준 프로토콜은 PISIM(Portable Internet Subscriber Identity Module)을 이용하여 PE(Portable Equipment)와 ACR 간에 상호 인증을 수행한다. 그러나 표준은 인증에 필요한 메시지의 수가 대체적으로 많은 편이며 PISIM의 분실과 에러가 발생했을 경우에는 사용자는 무선인터넷 서비스를 사용할 수 없게 된다. 따라서 본 논문에서는 ACR과 PSS 간에 키 동의 프로토콜을 수행하여 PSS를 인증한다. 이때 PSS의 계산량을 지원하기 위한 PSD(Power Support Device)가 키 동의 프로토콜에 참여하게 된다. 이렇게 생성된 키는 ACR과 안전한 통신 세션을 맺고 있는 KAS(Key Authentication Server)에 PSS의 식별자와 키 정보를 암호화에서 저장한다. 끝으로 제안된 프로토콜의 안전성과 효율성을 분석한다. An authentication between a user's terminal and a Access Control Router (ACR) is preceded so that a user receives secure WiBro services. Otherwise they can be exposed from many attack risks. So the Telecommunications Technology Association (TTA) constituted a mechanism of the mutual authentication for WiBro service. In mechanism a user executes the mutual authentication between a Portable Equipment (PE) and the ACR by using Portable Internet Subscriber Identity Module (PISIM). But this standard needs many message to authenticate the ACR and the users cann't use wireless Internet service. Therefore in this paper we propose the key agreement protocol between the PSS and the ACR to authenticate the PSS to ACR. At this time Power Support Device (PSD) fer supporting the calculated quantity of the PSS is participated in the key agreement protocol. The ACR sends a generated key to Key Authentication Server (KAS) via secure IPsec tunnel and then it preserves the identity of the PSS and the value of key after it enciphered them. In conclusion we analyze the security and efficiency of the proposed protocol.

LBS를 위한 개방형 서비스 플랫폼의 설계 및 구현

개인의 이동성을 중심으로 하는 LBS(Location-Based Services, 위치기반 서비스)는 이동통신 단말기의 진화 및 제반 인프라의 급속한 발전으로 인해 다양한 서비스의 요구가 증대되고 있다. 이러한 LBS를 가능하게 하는 기술은 크게 위치 측위 기술, 플랫폼 기술, 컨텐츠 처리 기술 및 이동체 DBMS 기술 등으로 구분된다. 이 중 플랫폼 기술은 위치제공 게이트웨이 서버와 연동하여, 과금, 인증. 위치 정보 보호, 위치 트리거, 지능형 위치획득 등의 일반적인 기능을 제공하는 역할을 수행한다. 국내 표준 단체에서는 위치 정보의 요청 및 제공을 위한 표준 인터페이스를 제공하고 있으며, 지리 정보의 대표적인 컨소시움인 OGC(Open GIS Consortium)의 OpenLS(Open Location Service)에서는 핵심 LBS를 제공하기 위한 표준 인터페이스를 정의하고 있다. 이 논문에서는 다양한 LBS를 제공하기 위하여 위치제공 게이트웨이 서버 및 컨텐츠 서버와 연동하는 서비스 플랫폼을 구현하였으며, 일반적인 플랫폼의 기능 이외에 다음과 같은 특징을 갖는다. 첫째, 서로 다른 위치제공 게이트웨이 서버에 대하여 동일한 인터페이스를 이용하여 위치 정보를 요청, 제공 할 수 있다. 둘째, OpenLS에서 제공하고 있는 4가지 핵심 컨텐츠 서버와 표준화된 방법으로 연동할 수 있다. 셋째, 기존의 무선 단말의 위치뿐만 아니라 유선 전화의 위치 또한 표준 인터페이스를 이용하여 제공할 수 있다. 넷째, 현재 위치에 대한 정보뿐만 아니라, 이동체 서버와 연동하므로 과거 이동 궤적에 대한 정보를 제공할 수 있다. 이 논문은 표준화된 방법을 이용하여 플랫폼의 구현 방법을 제시함으로써, LBS 시스템의 구축 및 활용에 크게 기여하였다. The LBS(Location-Based Service), which is based on individual's mobility, is required increasingly as mobile telecommunication and various infrastructures have developed rapidly. The technologies for LBS are location determination technology, service platform technology, contents provider technology and moving object database technology generally. Among these, service platform must be interoperable with location gate-way server and provide common function of billing, authentification, protect location information, privacy control, location trigger and intelligent acquisition and so on. The TTA(Telecommunications Technology Association) published specification that defines a standard protocol for safe and simple interface between LBS client and LBS platform and the OpenLS(Open Location Service) in OGC (Open GIS Consortium) released implementation specifications for providing Location based core services. In this paper, we implemented service platform for LBS which is able to interoperable with location gateway server and contents provider and is caracterized as follows. First, it could require and response location information from different types of location gateway server with same interface. Second, it complies with the standard interfaces with OpenLS 4 contents providers for core LBS. Third, it could provide location of wired phone as well as wireless mobile terminal compling with the standard protocol. Last, it could provide trajectorH information based past location as well as current location, because it is able to interoperable with moving object DBMS. This paper contributes to the construction and practical use of LBS by providing the method of implementation of service platform for LBS.

Investigation of CDMA Air Interface and Protocols

This appendix deals with the Korean air interface standard, TTA-62, for CDMA Mobile Systems (CMS) [1]-[2]. The standard has been set up by Telecommunications Technology Association (TTA) which is a standardization organization in Korea [3]. This standard is an important specification that should be determined prior to the development of a digital cellular system. The CMS has been developed on the basis of this standard and the papers published in this special issue are the results of the CMS development. This appendix also describes the technical commonality of these papers. It covers the outline of the air interface and protocol specifications. The outline includes its major characteristics, radio protocol architecture, functionalties, and call processing. A comparison is also given between TTA-62 and IS-95 [4], a North American digital cellular standard.