Denture Teeth Research Articles

Comparison of denture space and patient satisfaction for neutral zone versus standard-designed digital dentures restoring mandibular resorbed ridges: A crossover randomized clinical trial.

To compare neutral-zone-designed and standard-designed digital complete dentures used to restore severely resorbed ridges through differential digital analysis of teeth arrangement position, shape of the polished surface, and assessment of patient satisfaction. This study applied a within-subject comparison of two denture forms: computer-aided design and computer-aided manufacturing (CAD-CAM) dentures designed based on the bone-support concept (control group) and CAD-CAM dentures designed based on the neutral-zone concept (test group). Twelve completely edentulous patients exhibiting advanced ridge atrophy were recruited, and they were randomly assigned to use one of the two dentures before the other. A comparison between the two groups' virtual denture confines was conducted using "Medit compare" digital software. The average values of three-dimensional deviations between the two dentures at different regions were calculated. The "patient denture assessment" questionnaire was used to gauge participants' satisfaction with their dentures. The obtained scores were used to compare the two denture types. The position of the neutral zone was significantly shifted at the level of both denture teeth and denture base outer limits (p = 0.001). The greatest deviation was calculated at the region of the palatal polished surface followed by lingual flange contours, while the buccal flanges displayed the least deviations (p≤0.05). Statistically significant differences were observed between patients' satisfaction with neutral zone and standard dentures regarding function and comfort, retention, and stability of lower dentures (p≤0.05). CAD-CAM neutral-zone dentures have distinctly different anatomical confines that can be clinically correlated to their better impact on patient acceptance.

Comparison of anterior and posterior teeth dimensions between artificial teeth and natural dentition - An in vivo study

Background: The aesthetic and functional aspects of artificial tooth selection are pivotal for an individual's quality of life, a skill paramount to every prosthodontist. It gives a pleasing, expressive and confident life to the patient. Aim: This study aimed to juxtapose the dimensions of natural maxillary and mandibular anterior and posterior teeth with those of three commercially available denture teeth brands: Acryrock, Biorock, and Ivoclar Vivadent, taking into account gender variations Materials and Methods: Dentate casts from 23 males and 77 females were scrutinized for length and width of the natural anterior and posterior teeth dimensions. These measurements, collected by a single examiner employing a digital vernier calliper and flexible ruler, were subsequently compared to the specifications provided in the respective denture teeth mold charts. like Acryrock, Biorock, Ivoclar vivadent. The dimensions thus obtained are compared between the three systems of artificial teeth and natural teeth for selecting the best system of artificial teeth for complete denture prosthesis. Results : The study revealed that all three artificial teeth systems matched the width of natural maxillary anterior teeth. However, only the Ivoclar Vivadent teeth set closely resembled the dimensions of mandibular anterior and posterior teeth, as well as maxillary posterior teeth, across both genders. Conclusion: The findings confirm the feasibility of employing natural teeth dimensions to determine the size of anterior and posterior artificial teeth for complete denture prosthesis fabrication, providing a statistically and mathematically supported approach. keywords: artificial teeth, aesthetics, complete denture, dentulous subjects, mesiodistal width, prosthesis.

Healing sequelae following tooth extraction and dental implant placement in an aged, ovariectomy model.

At present, a lack of consensus exists regarding the clinical impact of osteoporosis on alveolar bone metabolism during implant osseointegration. While limited preclinical and clinical evidence demonstrates a negative influence of osteoporosis on dental extraction socket healing, no preclinical studies offer data on the results of implant placement in 6-mo-old, ovariectomized (OVX) Sprague-Dawley rats. This study aimed to investigate the outcomes of dental tooth extraction socket healing and implant placement in a rodent model of osteoporosis following daily vehicle (VEH) or abaloparatide (ABL) administration. Micro-CT and histologic analysis demonstrated signs of delayed wound healing, consistent with alveolar osteitis in extraction sockets following 42d of healing in both the VEH and ABL groups. In a semiquantitative histological analysis, the OVX-ABL group demonstrated a tendency for improved socket regeneration with a 3-fold greater rate for moderate socket healing when compared to the OVX-VEH group (43% vs 14%), however, this finding was not statistically significant (p=.11). No significant differences were observed between vehicle and test groups in terms of implant outcomes (BMD and bone volume/total volume) at 14- and 21-d post-implant placement. Abaloparatide (ABL) significantly increased BMD of the femoral shaft and intact maxillary alveolar bone sites in OVX animals, demonstrating the therapeutic potential for oral hard tissue regeneration. The present model involving estrogen-deficiency-induced bone loss demonstrated an impaired healing response to dental extraction and implant installation.

Association between maxillary incisor width and craniofacial measurements: A cone beam computed tomography study

Accurate prediction of maxillary central incisor width (CIW) is essential in prosthodontics for selecting appropriately sized denture teeth. While traditional methods exist, the digital era may offer more reliable techniques for anterior tooth selection. The purpose of this study was to investigate the correlation between CIW and craniofacial measurements derived from cone beam computed tomography (CBCT) scans to identify predictors for CIW and examine possible sexual dimorphism. A retrospective analysis was conducted on 80 three-dimensional skull models (40 men, 40 women; age range: 20 to 48 years) generated from segmented CBCT scans. Measurements included CIW, interpterygoid hamulus distance, bi-orbital width, interorbital distance, and piriform aperture width. Statistical analyses comprised independent t tests, bivariate correlations, and multiple linear regression (α=.05). Significant sexual dimorphism was observed in CIW, interpterygoid hamulus distance, and bi-orbital width (P<.05). CIW positively correlated with bi-orbital width (r=.75, P<.001) and piriform aperture width (r=.49, P<.001). Multiple regression analysis revealed bi-orbital width, and interorbital distance, along with sex, as significant predictors of CIW (R²=.59, P<.001). Bony bi-orbital width, interorbital distance, and sex can be used to estimate the maxillary CIW.

Mechanical properties of 3D-printed resin denture teeth: An in vitro study.

The purpose of this study was to compare the wear, fracture strength, and mode of failure of various brands of 3D-printed resin denture teeth with prefabricated acrylic resin. Additionally, the study aimed to analyze the different modes of failure exhibited by these teeth. The study utilized 90 3D-printed and 30 prefabricated, 3D-printed resin teeth from three brands: L = Optiprint Lumina, A = ASIGA DentaTooth, P = Power resins, along with prefabricated acrylic teeth from M = Major Super Lux. Each of the 30 samples per main group was divided into two subgroups: The first subgroup samples (M1, A1, L1, P1) were subjected to thermal cycling and mechanical loading; M2, A2, L2, and P2 were not aged and tested directly. A scan of a prefabricated acrylic tooth was taken using an intraoral scanner, and then the STL file was printed using an Asiga 3Dprinter. The specimens underwent aging to simulate 5 years of clinical use with 10,000 thermal cycles and 1,200,000 dynamic load cycles on a chewing simulator. Surface roughness parameters (Rz, Ra, Rq) were measured using a 3D Optical Profilometer, fracture resistance was assessed using a universal testing machine, and SEM analysis was performed to observe failure modes. Statistical analysis using T-test, one-way analysis, and two-way analysis processed by the Statistical Package for Social Sciences (SPSS) software version 23.0 (SPSS: Inc., Chicago, IL, USA) was done with a level of significance set at <0.05. The results showed that the difference in surface roughness parameters (Rz, Ra, Rq) before and after aging for Group M, Group A, Group L, and Group P was statistically significant (p < 0.05). Two-way ANOVA for wear resistance between aging and groups on dependent variable Rz (p = 0.002), Ra (p = 0.001), Rq (p = 0.001) were significant. Multiple comparisons for surface roughness parameters showed Group A and Group L were lower than Group P and Group M (p < 0.05). For fracture strength, One-way ANOVA showed a significant difference between groups for fracture strength either without or after the aging procedure (p < 0.05). Multiple comparisons for fracture strength without aging showed no significant difference between Group M, Group A, and Group L (p > 0.05). After the aging procedure fracture strength for Group M was higher than Group A, Group L, and Group P (p < 0.05). 3D-printed resin teeth showed a greater and comparable wear resistance to prefabricated acrylic teeth. Fracture strength was comparable between prefabricated acrylic teeth and 3D-printed resin (Asiga and Lumina) before aging, but after aging 3D-printed resin teeth showed less fracture strength.

Perception and Acceptance of Shade Variances in the Smile.

(1) This study aimed to evaluate the influences of differences in denture teeth shade on harmony ratings and esthetic quality. Particular attention was paid to the question of how the overall variance of shade differences in the dental arch influences the perception of shade differences between adjacent teeth. (2) A total of 51 pictures of upper front teeth with standardized different colors of the left central incisor and different color variance of the dental arch were created. Eighty participants without dental knowledge and of different age, sex and educational level rated the pictures on a visual analogue scale from 0 (strongly disagree) to 100 (strongly agree) with regards to esthetic and color equality. (3) Results: The color differences between two teeth were judged in a negative linear correlation to the evaluation of color and esthetic quality. There was a sex- and education-specific difference in color and harmony ratings. In relation to the age of the participants, there was a significant difference in the color rating (p = 0.01) but not in the harmony rating (p = 0.27). Lower rating of color difference and harmony was found for a color difference in the dental arch up to ΔE = 3.1. In contrast, higher color differences resulted in higher ratings. (4) There is an influence of personal parameters on color perception. Color inhomogeneity in a dental arch leads to significant differences in color and harmony rating in a non-linear relation.

Assessing the Color Stability of Polymethyl Methacrylate (PMMA) Dental Restorations Polished With a Novel Polishing Agent Derived From Pulverized Old Alginate Impressions.

Interim restorations are essential in restorative dentistry, serving as temporary solutions until permanent restorations can be placed. Polymethyl methacrylate (PMMA) is a promising solution for customizing teeth for removable dentures to match the exact requirements of patients. The color stability of these restorations is critical for patient satisfaction. PMMAis a widely used material for interim restorations due to its favorable properties. The study compares the color stability of PMMA interim restorations polished using traditional pumice versus Algishine, a novel polishing agent derived from pulverized old alginate impressions. The 3-D design software Geomagic Design X (3D Systems, Rock Hill, CA) created a standard tessellation language file of 2-cm radius circles. Sixty PMMA samples were milled and divided into two groups of 30 each. Group A samples were polished using pumice, while group B samples were polished with Algishine. Baseline color measurements were taken using a spectrophotometer (VITA Easyshade V, VITA Zahnfabrik, Bad Säckingen, Germany). The samples were then subjected to staining with coffee, tea, and red wine solutions for 30 days, simulating oral conditions. Post-staining color measurements were taken, and color changes (ΔE) were calculated at the seven-day (t1) and one-month (t2) mark. The Shapiro-Wilk test assessed normality, followed by a two-way ANOVA testto compare color change values at different time points. At t1 (seven days), there were no significant differences between groups A and B in the coffee and tea staining groups. However, significant differences were observed in red wine staining, with group B exhibiting lower ΔE values (0.14 ± 0.067) compared to group A (0.38 ± 0.076) (p < 0.01). At t2 (30 days), significant differences were noted in all staining groups. Group B consistently showed lower ΔE values: coffee (0.125 ± 0.084 vs. 0.236 ± 0.015, p < 0.01), tea (0.254 ± 0.087 vs. 0.391 ± 0.015, p < 0.01), and red wine (1.174 ± 0.045 vs. 1.309 ± 0.074, p < 0.01), indicating superior resistance to staining compared to group A. The results suggest that Algishine is more effective than pumice in maintaining the color stability of PMMA interim restorations. The novel polishing agent derived from old alginate impressions enhances esthetic longevity and provides an eco-friendly solution for recycling dental material waste. Algishine performs superiorly in preserving the color of PMMA interim restorations against common staining agents. Its application can potentially improve patient satisfaction and contribute to sustainable dental practices.

Biaxial flexural strength of nanoglass and multiwalled carbon nanotubes reinforced 3D-printed denture base resins and their shear bond strength to 3D-printed and acrylic denture teeth

ObjectiveEvaluation of biaxial flexural strength (BFS) of nanoglass (NG) and multiwalled carbon nanotubes (MWCNTs) reinforced 3D-printed denture base resins and their shear bond strength (SBS) to 3D-printed and acrylic denture teeth. MethodsSilanized NG and MWCNTs were added to 3D-printed denture base resin to obtain four groups: Control, 0.25 wt% NG, 0.25 wt% MWCNTs, and a combination group with 0.25 wt% of both fillers. All specimens were tested before and after 600 cycles of thermal aging. BFS (n = 88) was tested using disk-shaped specimens (12 ×2 mm) centralized on an O ring in a universal testing machine. Weibull analysis was conducted to assess predictability of failure. SBS (n = 176) was tested for acrylic and 3D-printed denture teeth attached to bar-shaped specimens in a universal testing machine followed by failure mode analysis using stereomicroscope. Two and three-way ANOVA tests followed by Tukey post hoc test were conducted for BFS and SBS. Kruskal-Wallis test compared percent change among groups with subsequent Dunn post hoc test with Bonferroni correction (α = 0.05). ResultsBFS was affected significantly by filler content (P < 0.001) and thermal cycling (P < 0.001), with thermal cycling displaying the uppermost effect (Ƞp2 =0.551). A significant interaction between filler content, thermal cycling, and teeth type was displayed by SBS results (P < 0.001, F=10.340, Ƞp2 =0.162). The highest BFS values belonged to 0.25 % MWCNTs while the highest SBS to printed teeth was displayed by the combination. SignificanceThe combination group displayed higher BFS and SBS to printed teeth compared to control which allows 3D-printed materials to have a long-term clinical success.

Classification system for maxillary fixed dental prostheses.

To present an addendum to existing fixed dental prostheses (FDPs) classification system for maxillary prostheses. The new classification identifies the relationships between FP-1 (fixed prostheses) designs and newly developed clinical interdental gingival contours. Clinical and laboratory descriptions of the various types of full-arch fixed prostheses are described with photographic illustrations. Benefits and limitations of the various prosthetic designs are explained. Surgical differences in the amount of alveolectomy are illustrated. One clinical case is demonstrated. A new classification system for maxillary implant fixed complete dentures is presented. The new system will serve as an improved communication aid for clinicians, patients, and laboratory technicians. Treatment of patients with edentulous maxillae and/or terminal dentitions and implant fixed complete dentures include several options relative to design and materials. Restorative space can have a major impact on prosthesis design and longevity. Early on in dental implant therapy, prostheses were generally made with cast metal frameworks, denture bases and denture teeth. Prosthetic complications were widely reported. With increased clinical experience and improved materials, computer-aided design and computer-aided manufacturing (CAD-CAM) protocols were developed that allowed stronger prostheses to be constructed in reduced or small restorative volumes. FP-1 ceramic implant-supported fixed prostheses (CISFPs) are designed to replace only the dental hard tissues and to promote preservation and rehabilitation of gingival soft tissues. The physical properties and minimum thickness requirements in full arch prostheses are influenced by several factors including distances between implants and rigid connector sizes. FP-1 CISFPs may be the closest prostheses the profession can offer edentulous patients that mimic the look, feel, and function of missing dentitions. Aesthetic outcomes of FP-1 CISFPs are variable and depend on a multitude of factors. This article presented a classification system that builds on existing classification by identifying the level of papilla heights achieved with FP-1 CISFPs.

Changes in denture teeth location in three different flasking techniques

Changes in denture teeth location in three different flasking techniques

Efficient Digital Workflow to Replace a Missing Denture Tooth for Complete Denture Repair.

Debonded denture teeth is a common complication on a fixed or removable dental prosthesis when denture teeth are fabricated separately from the denture base and bonded together. Missing denture teeth can alter a person's appearance, speech, or ability to eat. Traditionally, denture teeth repair can be a challenge for clinicians or dental laboratory technicians to find the identical tooth mould to meet esthetic and functional demands. This case report describes a digital workflow to scan, design, and mill a well-fitting and esthetic denture tooth to expedite treatment, improve patient satisfaction, and increase troop readiness when traditional methods may not be feasible.

In Vitro Analysis of Bonding and Wear Properties of 3D Printed Denture Tooth Materials.

While additive manufacturing (3D printing) has recently enhanced removable prosthodontics, the properties of new 3D printed materials are not well understood. This study aims to elucidate the physical properties of these materials, focusing on bonding to a 3D printed denture base material and wear resistance. For denture tooth-denture base bonding analyses, the same denture tooth material (Premium Teeth, Formlabs) was used with three denture base-bonding group assignments (n=6 each group) bonded using three protocols: Group A1 was bonded with Lucitone Digital Print-3D Denture Base using the Lucitone Fuse System (Dentsply), Group A2 with Formlabs Denture Base using the Formlabs Denture Base Bonding System, and Group A3 with Formlabs Denture Base using the Ivoclar Ivotion Bonding System (Ivoclar). Specimens were made according to the ISO-TS-19736-2027 standard. A 3D printed tooth mimicking a central incisor was bonded to the denture base and subjected to a palatal load at the incisal region at 90° from the long axis of the tooth until failure. The fracture surface was examined at 10× magnification. ANOVA with α=0.05 was used to determine statistically significant differences. For wear analysis, the same denture base material and bonding system (Lucitone Digital Print-3D Denture Base/Lucitone Fuse System, Dentsply) was used with four denture tooth material group assignments (n=8 each group): Group B1 used Formlabs Premium Teeth, Group B2 used SprintRay High Impact Denture Teeth, Group B3 used Lucitone Digital IPN Premium Tooth, and Group B4 used Ivotion Polymethyl Methacrylate (PMMA) Milled Teeth (Ivoclar). A premolar denture tooth bonded with the denture base was subjected to a chewing simulation cyclic loading of 1,200,000 cycles. Sample failures, vertical wear, and volume loss were documented. ANOVA with α=0.05 was used to determine statistically significant differences. The fracture load to failure values for A1, A2, and A3 were 175±106 N, 167±46.3 N, and 183±48.9 N, respectively (p=0.95). Most failure characteristics were mixed, except one of A2 was cohesive and half of A3 was cohesive. For cyclic loading, B4 was the only group where all specimens failed within 1,200,000 cycles, while B1, B2, and B3 had four, three, and five sample failures, respectively. Vertical wear was 0.93±0.34 mm, 1.22±0.37 mm, 1.05±0.27 mm, and 0.37±0.02 mm for B1, B2, B3, and B4, respectively (p<0.01). Abrasion volumes were 9.5±3.7 mm³, 12.2±4.7 mm³, 10.6±3.5 mm³, and 2.2±1.3 mm³ for B1, B2, B3, and B4, respectively. Vertical height loss per chewing cycle (μm/cycle) was 0.0022±0.0019, 0.0030±0.0029, 0.0012±0.00005, and 0.0080±0.0050 for B1, B2, B3, and B4, respectively (p<0.01). Abrasion volume per chewing cycle (μm³/cycle) was 17650.8±9682.9, 27263.4±24746.8, 11836.5±4200.8, and 70436.8±73602.5 for B1, B2, B3, and B4, respectively (p=0.02). The bonding strength and wear resistance of 3D printed denture materials vary by manufacturer. Formlabs Denture Base with Ivoclar Ivotion showed the highest fracture load, indicating superior bonding strength. In wear analysis, Ivoclar Ivotion PMMA Milled Teeth exhibited the least vertical wear and abrasion volume but had the highest failure rate under cyclic loading. While printed denture materials excel in bonding strength, their wear resistance may not be as good as milled denture teeth, highlighting the need to balance these properties in clinical applications.

Role of the Stem Cells from Human Deciduous Teeth in Dentistry: A Review

ABSTRACT Stem cells isolated from human exfoliated deciduous teeth or SHED possess high rate of proliferation along with high osteogenic as well as neurogenic differentiation when compared with dental pulpal stem cells. This stem cell population is an important source for therapeutic regeneration of tissues. Hence, the aim of present review article was to analyze the potential applications of SHED.

In vitro evaluation of the mechanical and optical properties of 3D printed vs CAD/CAM milled denture teeth materials

This laboratory research aimed to assess the Flexural strength, fracture toughness, Volumetric wear and optical properties of various recent 3D-printed denture tooth materials and compare them to CAD/CAM milled materials. Four 3D-printed denture tooth materials (Lucitone Tooth, OnX, Flexcera Ultra +, and VarseoSmile Crown Plus) and one CAD/CAM milled denture teeth material (Ivotion Dent) were used to fabricate fifteen specimens for each material (with total no. of 300 specimens). Tests were conducted according to ISO standards to assess flexural strength, fracture toughness, color staining, and volumetric wear. All materials were printed, washed, cured, or milled following the manufacturer’s instructions. Flexural strength and fracture toughness values were obtained by a universal testing machine. Volumetric wear was evaluated using a non-contact optical profilometer. Color stability outcomes were obtained via a spectrophotometer for determining L*a*b* values, with color change (ΔE2000) based on the CIEDE2000 formula. Data were analyzed using one-way ANOVA and Tukey post-hoc analysis (α = 0.05). All 3D-printed materials exhibited higher flexural strength values than the milled material (p < 0.05). For fracture toughness, two of the 3D-printed materials showed higher values than the milled material, while the other two had lower values. Insignificant variances in volumetric wear were detected between the materials (p > 0.05). Color staining results varied, with milled materials generally demonstrating better-staining resistance compared to the 3D-printed materials. 3D-printed denture tooth materials exhibit good mechanical and optical properties, presenting a cost-effective and efficient alternative to CAD/CAM milled materials for denture tooth fabrication.

The effect of sandblasting surface treatment on shear bond strength between acrylic denture teeth and thermoplastic nylon denture base

The effect of sandblasting surface treatment on shear bond strength between acrylic denture teeth and thermoplastic nylon denture base

Bonding Efficiency between Artificial Teeth and Denture Base in CAD/CAM and Conventional Complete Removable Dentures.

A common challenge encountered with both traditional and digitally produced dentures involves the extraction of artificial teeth from the denture base. This narrative review seeks to present an updated perspective on the adherence of synthetic teeth for denture base materials, employing diverse methods. Dental technicians often employ chemical approaches and mechanical techniques (including abrasion, laser treatment, and abrasive blasting) to augment the retention of denture teeth. However, the efficacy of these treatments remains uncertain. In certain instances, specific combinations of Denture Base Resin (DBR) materials and artificial teeth exhibit improved performance in conventional heat-cured dentures following these treatments. The primary reasons for failure are attributed to material incompatibility and inadequate copolymerization. As new denture fabrication techniques and materials continue to emerge, further research is imperative to identify optimal tooth-DBR combinations. Notably, 3D-printed tooth-DBR combinations have demonstrated reduced bond strength and less favorable failure patterns, while utilizing milled and traditional combinations appears to be a more prudent choice until advancements in additive manufacturing enhance the reliability of 3D-printing methods.

Effect of various surface treatment methods on shear bond strength between acrylic denture teeth and thermoplastic nylon denture base

AbstractPurposeTo evaluate the effect of mechanical, chemical, and mechanical‐chemical surface treatment methods on shear bond strength between acrylic denture teeth and thermoplastic nylon denture base.Materials and MethodsMaxillary central incisor teeth were treated with five different surface treatment methods: mechanical (sandblasting, T‐shape diatoric holes), chemical (5% acetic acid solution, bonding agent), and mechanical‐chemical (sandblasting + bonding agent) were embedded in thermoplastic nylon denture base (n = 10). A universal testing machine with a crosshead speed of 0.5 mm per minute was used to test the shear bond strength. Data obtained were statistically evaluated using one‐way ANOVA and followed with Tukey post hoc test (α = 0.05)ResultsT‐shaped diatoric holes exhibited significantly higher shear bond strength among the surface treatment groups, followed by sandblasting + bonding agent, sandblasting, bonding agent, and the acetic acid group (p &lt; 0.001)ConclusionT‐shaped diatoric holes as a mechanical surface treatment showed higher shear bond strength than other methods.

Surface hardness and wear resistance of prefabricated and CAD‐CAM milled artificial teeth: A cross‐over clinical study

AbstractPurposeTo clinically evaluate the surface roughness and wear resistance of prefabricated and CAD‐CAM milled acrylic resin teeth for complete dentures.Materials and methodsIn a cross‐over study design, 10 completely edentulous patients were randomly included in this study and given two complete dentures. The first complete denture was made using prefabricated teeth, while the second was constructed using CAD‐CAM milled teeth. Following insertion (T0), 3 months (T3), and 6 months (T6), the complete dentures were scanned. Utilizing 3D surface super‐imposition techniques, the vertical (2D wear), and volumetric (3D wear) material loss were measured. The hardness of the teeth was evaluated at the time of denture insertion (T0) and then after 6 months (T6) of denture insertion by digital Vickers hardness tester. Statistical analysis was done using SPSS software. Paired groups were compared by paired t‐test. Also, a repeated measure test was used. The significant difference was considered if p ≤ 0.05.ResultsThe time of denture function was linearly correlated with the wear of the prefabricated and CAD‐CAM milled denture tooth. Prefabricated acrylic teeth had significantly more vertical and volumetric wear after 3 and 6 months, compared to CAD‐CAM milled denture teeth where p‐values were 0.01, 0.009, 0.003, and 0.024, respectively. Additionally, CAD‐CAM milled teeth displayed significantly higher hardness values than prefabricated teeth both before and after 6 months of use where p‐values were 0.001. After 6 months, all studied teeth showed a decrease in their hardness.ConclusionsIn terms of wear resistance and surface hardness, CAD‐CAM milled acrylic resin teeth were superior to prefabricated acrylic resin artificial teeth once the complete denture functions.

Analysis of the Surface Roughness of Different Denture Teeth Materials: A Quantitative In-Vitro Study.

The surface roughness of denture teeth materials significantly influences their clinical performance and patient satisfaction. Understanding the variations in surface roughness among different materials is crucial for optimizing denture fabrication processes. In this quantitative in-vitro study, three commonly used denture teeth materials, namely acrylic resin, composite resin, and porcelain, were evaluated for surface roughness. Twenty samples of each material were prepared and subjected to profilometric analysis. The surface roughness parameters Ra and Rz were measured using a contact profilometer. Statistical analysis was performed to compare the surface roughness among the different materials. The mean surface roughness (Ra) values were found to be 0.32 μm for acrylic resin, 0.25 μm for composite resin, and 0.18 μm for porcelain. Similarly, the mean Rz values were 2.45 μm for acrylic resin, 1.98 μm for composite resin, and 1.62 μm for porcelain. Statistical analysis revealed significant differences in surface roughness among the three materials (P < 0.05). Porcelain denture teeth exhibited the smoothest surface, followed by composite resin and acrylic resin. These findings suggest that material selection plays a crucial role in determining the surface roughness of denture teeth. Porcelain may offer superior aesthetics and reduced plaque accumulation compared with acrylic and composite resin materials. Clinicians should consider these differences when choosing denture materials to achieve optimal clinical outcomes and patient satisfaction.

The analogous intraoral judgement of the abutment preparation angle is almost impossible! At least avoid undercuts.

A total occlusal convergence (TOC) angle (ϕ) of 6 degrees is a typical crown preparation requirement. It has been shown that this is difficult to achieve clinically. The present study therefore aims to compare the ability of students to judge different steepnesses, including a -1-degree undercut of prepared canines and molars, under clinical conditions with different analog tools. The complete dentures of a patient were duplicated without denture teeth 16, 23, 33, and 46. For each of these gaps, six crown stumps were milled with ϕ/2 = -1, 3, 6, 9, 12, and 15 degrees, each of which was insertable using mini-magnets. A total of 144 dental students, 48 students each from the 1st, 6th, or 9th semester, estimated these angles intraorally with various aiding tools: In addition to basic dental instruments, they used a parallelometer mirror, an analog clock dial with a 6-degree visualization, and a scale of tooth stumps with ϕ/2 between -1 and 15 degrees. The widely demanded 3 degrees were hardly recognized, but assumed to be steeper or even undercut. In contrast, the -1-degree divergent stump walls were predominantly estimated as parallel-walled or slightly conical. With increasing taper, the stumps tended to be classified as steeper, ie, "better." The additional tools did not result in a general improvement of the estimation performance. Students from higher semesters did not achieve better results. The present authors question the objectivity of an exclusively visual assessment of crown stump taper. It appears that dental training should at least focus on avoiding undercuts as the minimal prerequisite for an accurate intraoral scanning procedure. Digital control of the preparation angle by an intraoral scan and immediate clinical implementation of these results could help to produce appropriate preparations.