Tectonic Inversion Research Articles

Tectonic Inversion in Sediment-Hosted Copper Deposits: The Luangu Area, West Congo Basin, Republic of the Congo

Complex Neoproterozoic tectonic processes greatly affected the West Congo Basin, resulting in a series of dispersed copper deposits in the Niari Sub-basin, Republic of the Congo. Structural observation and analysis can help in understanding both the transportation pathways for copper accumulation and the detailed tectonic evolution processes. This study examines cases from four copper mine sites in the Luangu region of the Niari Basin, using a set of codes that consider the three regional tectonic regimes (extension, extrusion, and contraction) and three deformation criteria (maximum effective moment criterion, tensile fracture criterion, and the Coulomb criterion). By combining these two aspects, nine new codes are introduced: the extension maximum effective moment criterion (EM), extension tensile fracture criterion (ET), extension Coulomb criterion (EC), strike-slip maximum effective moment criterion (SM), strike-slip tensile fracture criterion (ST), strike-slip Coulomb criterion (SC), compression maximum effective moment criterion (CM), compression tensile fracture criterion (CT), and compression Coulomb criterion (CC). By analyzing and applying these codes to the selected sites, we show that the new codes can present a geometric coordination catering to an exhumation-related inversion process from extension, strike-slipping, to contraction. The existence of SM- and CM-related structures that occurred during regional extrusional and contractional events may indicate a deeper level of exhumation for layers related to copper deposits in the field sites. A new tectonic evolution model is presented, considering the hypothesis of vertical principal stress changes while the two horizontal principal stresses remain relatively constant during copper mineralization affected by the Western Congo Orogen. The application of the nine codes facilitates the determination of interrelations between different tectonic regimes.

Clockwise extrusion of the Sichuan‒Yunnan block toward the Red River Fault in the southeastern Tibetan Plateau

The Xiaojiang Fault and the Red River Fault, which are located on the southeastern margin of the Tibetan Plateau, are the eastern and southern boundaries of the Sichuan–Yunnan Block, respectively. The relationship between these two faults is highly important for the study on the tectonic evolution and seismic risk of the southeastern margin of the Tibetan Plateau. Using the digital elevation model (DEM) data, we extracted and analyzed the maximum elevation, peak steepness index, maximum slope, and relatively flat surface of the Ailaoshan Shear Zone on the southwest side of the Red River Fault. The results revealed that the geomorphic indices result around Yuanjiang were significantly lower than those on the northern and southern sides of Yuanjiang. On the basis of lithology, climate and tectonics, it is inferred that tectonic activity is the main factor controlling landform development. On the basis of existing geophysical and geomorphic survey results in this area, a geodynamic model of this area was constructed: in the mid-Miocene, tectonic inversion of the Red River Fault occurred, and material from the Tibetan Plateau flowed into the Sichuan‒Yunnan Block around the East Himalayan Syntax. The resulting extrusion caused the Red River Fault to bend of ∼50 km; in the early Pliocene, the middle and lower crust broke through the barrier and entered the interior of the Ailaoshan Shear Zone. Because of the extrusion of the middle and lower crust, the role of the Red River Fault as the boundary has weakened.

Tectonic Inversion of Intracontinental Basins and the Conundrum of Plate‐Scale Stress Propagation: The Case of the Jatobá Basin, NE Brazil

AbstractWe chose the Jatobá Basin (JB) in the Borborema Province in northeastern Brazil to address two outstanding problems, basin tectonic inversion and stress propagation, because (a) evidence of tectonic inversion is conspicuous in the JB, and (b) the basin sits on intracontinental northeastern Brazil, far from plate boundaries and the most obvious stress sources. We found robust evidence of oblique reverse faulting inside the basin, putting sediments of the JB's depocenter hundreds of meters above the hard granitic host basement. We also found sound evidence of hydrographic flow reversal, that is, earlier basement‐to‐basin runoff, followed by basin‐to‐basement runoff. This change means that formerly the basement stood higher than the basin, and later the basin was uplifted (inverted) to currently stand hundreds of meters higher than the basement, especially where the gravity anomaly map shows the deepest depocenter. Coarse conglomerates, sourced in the uplifted basin and blanketing the adjacent basement for kilometers, are only cut by the current hydrographic network. From these main lines of evidence, we infer recent basin tectonic inversion (Quaternary, i.e., <2.6 Ma?). The WSW‐ENE orientation of the maximum compressive stress needed to invert the basin likely results from Mid‐Atlantic and Andean pushes. We conclude that lithospheric plates can deform in their cores because of stresses propagating from plate boundaries to distant plate interiors, where the lithosphere has been locally weakened and strain has concentrated.

Thermochronological constraints on the evolution of the Bongor Basin, Chad

The Bongor Basin is an important petroliferous basin in the Western and Central African rift system. The basin's evolution history is featured with a strong tectonic inversion during the Late Cretaceous, which resulted in its unique basin structure and hydrocarbon accumulation pattern. However, due to the complex process of repeated cooling and heating, single sample bedrock thermochronology can hardly provide accurate constraints to its thermal evolution history. In this paper, nine granitic core samples from the crystalline basement in five wells on the northern slope of the Bongor Basin were analyzed using multiple thermochronological methods (apatite U-Th/He, apatite fission tracks and length distribution, apatite U-Pb dating) as well as vertical profiles to obtain a more accurate thermal history. The results show that the samples from all five wells underwent four stages of thermal history: from ∼600 Ma to 135 Ma, the samples cooled continuously from 600 °C to near-surface temperatures; from ∼135 Ma to 100 Ma, the samples were heated rapidly; from 100 Ma to 60–80 Ma, the samples cooled rapidly; and after that, the samples experienced slow differential heating and cooling. The thermal history results show that the key time for the strong inversion of the Bongor Basin was between 80 and 90 Ma when the basin was uplifted and exhumed as a whole, while samples in different fault blocks underwent differential uplift and subsidence since the Paleogene.

Astronomical timescale across the middle Permian–Early Triassic unconformities in the northwestern Junggar Basin: Implications for the origin of the unconformities

The middle Permian–Early Triassic terrestrial successions in the Junggar Basin record an important tectonic transformation stage characterized by the development of unconformities. These unconformities control billion-ton-scale hydrocarbon reservoirs in the northwestern Junggar Basin; however, their age, duration and underlying causes remain uncertain in the absence of an accurate Permian‒Triassic timescale. This study performed a comprehensive cyclostratigraphic analysis utilizing natural gamma ray data from 14 wells to determine the age and duration of the unconformities spanning from the middle Permian Lower Wuerhe (P2w) Formation to the lower Triassic Baikouquan (T1b) Formation while also revealing their potential origins. Our results suggest that astronomically forced climate changes were recorded in the western Junggar Basin during the Permian‒Triassic period. By applying astronomical tuning through sedimentation rates across each well, 14 time-domain series were generated. Using two previously reported maximum sedimentary ages from detrital zircon U–Pb dating, a 38.2-million-year long astronomical timescale was constructed, encompassing the period from the middle Permian Xiazijie Formation to the lower Triassic Baikouquan Formation. This analysis constrains the duration of unconformities between the P2w and T1b formations to ∼7–23 Myr. By integrating the duration, order, and implications of these unconformities with previously reported evidence, we conclude that the unconformity between the middle Permian and upper Permian was driven primarily by tectonic inversion resulting from intensified regional tectonic activity. In contrast, the unconformity between the upper Permian and Lower Triassic likely arose from uplift and erosion induced by compressive stresses associated with tectonic activity, which contributed to the formation of unconformities and stratigraphic discontinuities. This work provides a crucial reference for further studies aimed at integrating detailed sedimentological analyses with high-resolution geochronological data to further elucidate the timing and effects of these tectonic events on sedimentary facies and basin development.

Fluid flow in the Katanga Supergroup: From Lufilian brittle tectonic stages to the post-Lufilian period (Democratic Republic of Congo)

The metasedimentary rock succession of the Neoproterozoic-Cambrian Katanga Supergroup in the Central Africa Copperbelt shows evidence of several complex tectonic events. The deformation of this supergroup started from the tectonic inversion at about 570 Ma and lasted up to today, but reached paroxysm at ∼550 Ma. This long period was characterized by folding and faulting throughout multiple compressive and extensional events, which controlled the regional fluid flow on the one hand, and played an important role during formation of the stratiform to stratabound Cu-Co (Ni, U) deposits and the polymetallic Cu-Zn-Pb (Ag, Ge, Mo, Cd) vein type deposits on the other hand. Based on the structural analysis and paleostress reconstruction, coupled with fluid inclusion characterization from mineralized structures in rocks from the Nguba, Kundelungu and Biano Groups, this study demonstrates that the composition of hydrothermal fluids changed during brittle tectonic deformation during the Lufilian orogeny and subsequent uplift and post-Lufilian faulting.During early brittle tectonic deformation along strike slip faults with sinistral and dextral movement related to a NE-SW transpression, the Cu-mineralizing fluid was hypersaline (27.9–31.1 eq. wt% NaCl) with moderate temperatures (Th = 128–216 °C). The subsequent Cu or Cu (Zn, Pb) mineralization formed within an E-W extensional stress regime, related to the late Lufilian orogenic collapse. The fluid inclusions present in the gangue minerals associated with this latter mineralization show a large range in Th (50–264 °C) and salinity (26.7–36.0 eq. wt% NaCl). The decrease in temperature is interpreted to be due to migration of the fluids at shallower depth in the subsurface after uplift and erosion of the orogen. The increased salinity of the fluid is related to the dissolution of evaporites, mainly NaCl. A second H2O-NaCl-CaCl2 fluid with a homogenization temperature below 55 °C has also been found associated with this brittle stage and mineralization phase, but only in rocks belonging to the Kundelungu Group. A third mineralization phase, also characterized by Cu or Cu (Zn, Pb), formed during the post-Lufilian period within a NW-SE transpressional inversion regime. The fluid inclusion in the gangue minerals of this mineralization phase have a smaller range in homogenization temperature (Th = 37–172 °C) and the largest range in salinity (0.71–30 eq. wt% NaCl), compared to the earlier fluid inclusions generations. This large range in salinity may be explained by the mixing of a high salinity fluid, already present during the earlier tectonic stages in the sedimentary basin, with meteoric water. During the more recent rift-related extension, a fluid with again a large and higher range in homogenization temperatures (Th = 47–257 °C) and with a typical low salinity (<10 eq. wt% NaCl) has been recognized in minerals filling NNE-SSW to NE-SW oriented faults and fractures. The upward migration of a relatively low-salinity fluid from deeper parts in the subsurface explains the variation in the temperatures observed with this tectonic event.

The Tectonic Inversion Prediction in Fold-and-Thrust Belts by Using Numerical Modeling

The Tectonic Inversion Prediction in Fold-and-Thrust Belts by Using Numerical Modeling

Multiphase growth and basin control of main faults on Northern sub-basin, Beibuwan basin, Northwestern South China sea

The basement-involved faults and multiphase extension control the three-dimensional (3-D) fault geometries and kinematics, producing different fault growth models in continental rift basins. In this paper, we apply qualitative and quantitative fault analysis techniques to 3D high-resolution seismic data from the Northern sub-basin of Beibuwan basin, building the tectonic-stratigraphic framework and proposing the evolutionary meachanisms of main normal faults. The results suggest that extensional stress changed from NW-SE direction during Paleocene-Middle Eocene to N-S direction in Late Eocene-Oligocene, leading to the ENE or E-W directed propagation of fault networks together with lateral and vertical linkage of fault segments. This includes three conceptual models: (1) F1 originated from propagation, interaction, linkage and failure of initial seven ENE-directed isolated faults, and grows following isolated fault growth model; (2) F2 nucleated as a normal fault before buried in Late Eocene, and reactivated as dextral strike-slip fault in Oligocene, therefore experienced vertical segmentation and linkage; (3) F3 activated as a long-term constant-length fault with generally increased displacement in Paleogene. Our study proposes that the T83 interface (the top of the second member of the Liushagang Formation) is a tectonic stress transition interface, while the T60 interface is both a tectonic inversion interface and a post-rift unconformity interface. Furthermore, the growth of extensional faults commonly accompanied single breached, transfer-fault breached or double breached relay ramps and fault-related folds, thereby exerting a significant influence on the basin architecture and sediment distribution.

Tectonic Inversion and Deformation Differences in the Transition from Ionian Basin to Apulian Platform: The Example from Ionian Islands, Greece

The studied areas (the Ionian Islands: Paxoi, Lefkas, Kefalonia, and Zakynthos), are situated at the western ends of the Ionian Basin in contact with the Apulian Platform and named as Apulian Platform Margins. The proposed model is based on fieldwork, previously published data, and balanced geologic cross-sections. Late Jurassic to Early Eocene NNW–SSE extension, followed by Middle Eocene to Middle Miocene (NNW–SSE compression, characterizes the Ionian basin). The space availability, the distance of the Ionian Thrust from the Kefalonia transform fault and the altitude between the Apulian Platform and the Ionian Basin that was produced during the extensional regime were the main factors for the produced structures due to inversion tectonics. In Zakynthos Island, the space availability (far from the Kefalonia Transform Fault), and the reactivation of normal bounding faults formed an open geometry anticline (Vrachionas anticline) and a foreland basin (Kalamaki thrust foreland basin). In Kefalonia Island, the space from the Kefalonia Transform Fault was limited, and the tectonic inversion formed anticline geometries (Aenos Mountain), nappes (within the Aenos Mountain) and small foreland basins (Argostoli gulf), all within the margins. In Lefkas Island, the lack of space, very close to the Kefalonia Transform Fault, led to the movement of the Ionian Basin over the margins, attempting to overthrust the Apulian Platform. Because the obstacle between the basin and the platform was very large, the moving part of the Ionian Basin strongly deformed producing nappes and anticlines in the external part of the Ionian Basin, and a very narrow foreland basin (Ionian Thrust foreland basin).

Timing of hydrocarbon charge in the Axial Zone of the Eastern Cordillera, Colombia

The petroleum potential of onshore basins in Colombia has been partly controlled by the Andean Orogeny since the end of the Cretaceous. Its Axial Zone has at least one understudied active petroleum system with a rather low petroleum potential and few commercial medium to heavy oil accumulations, raising questions about how the Andean deformation influenced the petroleum system and the possible undiscovered accumulations. We examine the timing of this petroleum system in the Axial Zone through oil–source correlations and two 2D petroleum system models across the Boyacá and Soápaga faults based on cross-sections. Modelling reveals the direct control of deformation on generation–accumulation in the Axial Zone, where the Lower Cretaceous source rocks, due to high heat flows during the synrift phase, started generation so early (100 to 60 Ma) that no reservoirs or traps were yet available to allow hydrocarbon entrapment and accumulation. Equally, for the younger Upper Cretaceous source rocks, the tectonic inversion of the basin between 33 and 23 Ma along the Boyacá and Soápaga faults interrupted burial and the maturation in most parts of the basin, leaving only local pods of active source rocks where maturation continues today due to the tectonic overburden along the footwall of the Soápaga Fault. The latter is thus the major kitchen, contributing more than 50% of the liquid hydrocarbons trapped mainly in Upper Cretaceous and Paleocene sandstones. Hydrocarbons migrate upwards where biodegradation and water washing occurred in the near-surface, giving rise to the many tar sand occurrences in the Eocene sandstones.

Fossil metasomatized and newly-accreted fertile lithospheric mantle volumes beneath the Bakony-Balaton Highland Volcanic Field (central Carpathian-Pannonian region)

This study focuses on upper mantle xenoliths from Sabar-hill (Bakony-Balaton Highland Volcanic Field), a newly discovered locality of mantle xenoliths, situated in the central Carpathian-Pannonian region (CPR). The investigated seven peridotite and one pyroxenite xenoliths record two episodes in the geochemical evolution of the local subcontinental lithospheric mantle. The moderately deformed Group I xenoliths reveal modal contents (≥9 vol% orthopyroxene), major element characteristics (depletion in Al2O3 and CaO in orthopyroxenes) and trace element features (e.g., enrichment in U, Pb and Sr in clinopyroxenes) typical in supra-subduction zones (i.e., mantle wedge) xenoliths. All these suggest that the studied xenoliths were formed by silica-rich fluid/melt - peridotitic wall rock interactions. The tectonic background to the formation of Group I xenoliths is likely linked to the subduction of an oceanic slab during the Mesozoic-Paleogene. This may have happened far from the current position of Sabar-hill, to where the lithosphere, including the metasomatized mantle volume, was transferred via plate extrusion. The less deformed, dominantly protogranular and porphyroclastic Group II xenoliths are depleted in light rare earth elements (LREE). In contrast, they are enriched in clinopyroxene (≥11 vol%), incompatible major elements (e.g., Al and Na) and heavy rare earth elements (HREE), by a minimum of four times compared to primitive mantle. All these suggest that Group II xenoliths represent a geochemically fertile mantle partition and the degree of partial melting affected this mantle section was limited (≤7% based on trace elements). Group II xenoliths have higher equilibrium temperatures (1088–1168 °C) compared to Group I xenoliths (1018–1089 °C). The lack of petrographic and geochemical evidence pointing to metasomatism-related annealing in Group II xenoliths suggests that they are derived from a greater depth. It follows that Group II xenoliths could represent prior asthenosphere volumes which recently accreted to the lithosphere. The lithospherization of the upper part of the asthenosphere may have initiated after the tectonic inversion of the region, when compressional tectonic regime beneath the CPR gradually overtook the former extensional one in the last ∼8 Ma. The high bulk structural hydroxyl content in both Group I (22–1699 ppm) and II (55–320 ppm) xenoliths is likely linked to the subduction events that took place in the CPR from the Mesozoic onwards. These events transported significant amounts of fluid (H2O) back to the upper mantle, affecting both the mantle wedge and the asthenosphere.

Fold-thrust belt in the southern front of the central High Atlas (Morocco): Analysis and implications for the tectonic inversion of the atlas system

Thrust folds have developed significantly in the meso-Cenozoic rock units of the Errachidia-Boudnib basin. The study areas correspond to the north part of the Pre-African Trough, which is located between the Anti-Atlas and the Atlas systems. It is characterized by faulted anticlines that are indicative of a foreland orogenic context.The Atlas system's structural evolution underwent several stages, starting with a Triassic extensional event followed by a period of fault reactivation during the Atlas compression. This research focuses on examining the thrust and detachment folds associated with both reverse and strike-slip components. For this purpose, we performed detailed geological mapping and interpretation of folding and fault slip data.As a result of shortening, field observations reveal that the study area exhibited well-developed thrusting geometry. Preexisting blind faults and multiple decollement levels within favorable formations such as Cenomanian evaporitic marls, Cenomanian-Turonian marls rich in organic matter, and Senonian argillites influence the folding patterns, which are not uniform. The findings demonstrate two key points. First, the most significant folds have formed along major blind thrusts. Subsequently, between these major faults, detachment folds were developed within the Jurassic-Cretaceous strata. Currently, due to erosion, certain thrusts have become visible, including the Ta'bbast thrust fault, Ait Atman (from the first stage), and the Timazguit fault zone (from the second stage). The South Atlas fault largely remains a blind fault. Additionally, the study emphasizes the presence of strike-slip components and en-echelon folding, indicating a transpressional regime during the uplift of the Atlas system.

Triassic-Jurassic evolution of the Dabashan Foreland Basin: Detrital zircon perspectives on the tectonic amalgamation of the South China and North China blocks

The Mesozoic Dabashan Foreland Basin, a result of the Mianlue Ocean closure, formed through the collision and amalgamation of the South China and North China blocks. As such, it contains an important record of the tectonic processes leading to the formation of the Qinling Orogenic Belt; however, the timing of transition from basin to mountainous terrains remains debated. Geochronological studies indicate continental collision occurred in the mid-Permian to early Triassic, while some paleomagnetic data suggest a Middle to Late Jurassic occurrence time. Utilizing detrital zircon geochronology and trace element data, in this paper, we examine Triassic-Jurassic sediment provenance patterns during the evolution of the Dabashan Foreland Basin. Results show that in the Middle Triassic, the north Yangtze Block received detrital input from the southern margin of the North China Block. In the Late Triassic, significant tectonic inversion occurred, with detrital sources from the southern margin of North China Block, North Qinling, South Qinling, and the north Yangtze Block. During the early and Middle Jurassic, detrital sources gradually shifted to a dominance from South Qinling, indicating a phased southward migration of collisional orogenic belt sources. Combining thermal events, crustal thickness variations, and paleomagnetic data, we propose a novel model explaining oblique compression along the north Yangtze Block during the early Mesozoic. This model suggests that the Dabashan Foreland Basin likely predates the Middle Triassic, and we contend that crustal deformation and lateral shortening during Mesozoic accretionary orogeny between North China Block and South China Block may explain the debate over collision timing.

Tectonic inversion of an intracontinental rift basin: An example from the opening and closure of the Paleo-Tethys Ocean, northern Tibetan Plateau

Suture zones located across the Tibetan region clearly demarcate the rift-and-drift and continental accretion history of the region. However, the intraplate responses to these marginal plate-tectonic events are rarely quantified. Our understanding of the Paleo-Tethyan orogenic system, which involved ocean opening and closing events to grow the central Asian continent, depends on the tectonic architecture and histories of major late Paleozoic−early Mesozoic orogenic belts. These opening and collision events were associated with coupled intracontinental deformation, which has been difficult to resolve due to subsequent overprinting deformation. The late Paleozoic−early Mesozoic Zongwulong Shan−Qinghai Nanshan belt in northern Tibet separates the Qilian and North Qaidam regions and is composed of Carboniferous−Triassic sedimentary materials and mantle-derived magmatic rocks. The tectonic setting and evolutional history of this belt provide important insight into the paleogeographic and tectonic relationships of the Paleo-Tethyan orogenic system located ∼200 km to the south. In this study, we integrated new and previous geological observations, detailed structural mapping, and zircon U-Pb geochronology data from the Zongwulong Shan−Qinghai Nanshan to document a complete tectonic inversion cycle from intraplate rifting to intracontinental shortening associated with the opening and closing of the Paleo-Tethyan Ocean. Carboniferous−Permian strata in the Zongwulong Shan were deposited in an intracontinental rift basin and sourced from both the north and the south. At the end of the Early−Middle Triassic, foreland molasse strata were deposited in the southern part of the Zongwulong Shan during tectonic inversion in the western part of the tectonic belt following the onset of regional contraction deformation. The Zongwulong Shan−Qinghai Nanshan system has experienced polyphase deformation since the late Paleozoic, including: (1) early Carboniferous intracontinental extension and (2) Early−Middle Triassic tectonic inversion involving reactivation of older normal faults as thrusts and folding of pre- and synrift strata. We interpret that the Zongwulong Shan−Qinghai Nanshan initiated as a Carboniferous−Early Triassic intracontinental rift basin related to the opening of the Paleo-Tethyan Ocean to the south, and it was then inverted during the Early−Middle Triassic closing of the Paleo-Tethyan Ocean. This work emphasizes that pre-Cenozoic intraplate structures related to the opening and closing of ocean basins in the Tethyan realm may be underappreciated across Tibet.

Analogue modelling of a salt ridge growth in M'Rhila-Labaied-Trozza fault relay zone, central Tunisia

Tunisia, located in the Northern African margin, was subjected to Late Permian-Early Cretaceous N–S extension subsequent to Pangea breakup and leading to the Tethyan opening and widening. During the Mid- and Late Cretaceous, the NE–SW crustal extension that established the Pantelleria-Malta-Sirt grabens system underlining the eastern margin stretched also the Tunisian Atlassic domain, creating and/or reactivating many NW-SE extensional structures as much as the grabens in central Tunisia and leading to volcanism and halokinesis along several weak zones. Neogene compressional tectonics inverted the earlier extensional structures and impacted most of the halokinetic features established within the post-Triassic cover. The M'Rhila-Labaied-Trozza fault relay zone, located in the middle of central Tunisia, shows both extensional and compressional structures with Triassic extrusive features and seems to be a key feature for understanding the geodynamic development of the area. In this work, we combined field and geophysical data together with analogue models to decipher the structure and the kinematic evolution of the study area. The results showed that the studied structures are associated with reactive Mesozoic salt ridges established along an extensional fault relay zone that utilized NW-SE, E-W and NE-SW inherited fractures. These initially created extensional corridors allowing Triassic evaporite extrusion and accumulation, then influenced the deformation of the area in transpressional and local pure compressional regimes depending on the fractures and stress orientations during tectonic inversion. Analogue guided interpretation of the successive deformational stages of the study area from salt ridge growth to its tectonic inversion.

The Ancient Configuration of the Southern Central Andes and Paleogeographic Reconstruction of the Late Cretaceous Foreland Basin at 34°40’S

AbstractThe early stages of Andean construction have been barely recognized due to a long history of tectonic superposition during the growth of the orogen. In this work, we present a multi‐method approach integrating sedimentological, geochronological, structural, and provenance analyses to reconstruct the architecture of the Late Cretaceous foreland basin at 34°40’S. We identified a new depocenter located in an inner position of the Late Cretaceous foreland basin, a strategic location to understand the sedimentation dynamics near the topographic front of the orogen. Two sandstone samples from the basal and upper sections of the Diamante Formation were collected for detrital zircons dating, which yielded maximum depositional ages between 98 Ma and 91 Ma. The provenance analyses based on U‐Pb zircons ages indicated a main source area located to the west, in the incipient orogenic belt, with a complementary contribution from basement rocks, located to the east. Moreover, growth strata documented in these deposits were compared with structural kinematic models, which suggest that some of these deposits are associated with inherited structures, reactivated during the tectonic inversion of the extensional Jurassic Atuel depocenter. Our paleogeographic model comprises an Andean Cordillera flanked by a hinterland basin to the west and a foreland basin to the east, with a deformational front positioned further east compared to previous models.

The impact of tectonic inversion on diagenesis and reservoir quality of the Oligocene fluvial sandstones: The upper Huagang formation, Xihu Depression, East China Sea Shelf Basin

Inversion tectonics are of paramount importance for forming a range of hydrocarbon traps and reservoirs for petroleum exploration. Also, the uplift and exhumation of strata, the activation and creation of faults and leakage or breaching of hydrocarbon traps are often attributed to multiple inversion. Changes in fluid activity and the geochemical system are frequently observed during such tectonic inversions. However, the impacts of tectonic inversion on fluid flow and potential diagenetic alterations within deeply buried sandstone reservoirs are not fully understood, posing challenges to accurately assessing reservoir quality and furthering exploration efforts. The Oligocene fluvial sandstones in the Yuquan anticline of the Xihu Depression were investigated by XRD, optical microscope and SEM-EDS-CL along with and petrophysical data to illustrate the impact of tectonic inversion on the evolution of diagenesis and reservoir quality. The two representative exploration wells, C-1 and C-2, originating from the same provenance and sedimentary background in Yuquan anticline, exhibit significant diagenetic alterations attributed to varying degrees of tectonic inversion. Notably, well C-1 has experienced more intense alterations and dissolution of detrital grains compared to well C-2 (average secondary pore, well C-1: 4.8%, well C-2: 2.9%), particularly the complete dissolution of plagioclase grains. Moreover, the content of authigenic kaolinite and quartz cement of well C-1 is higher than that of well C-2, averaging 7.2%, 4.5% and 5%, 1.7% respectively. This diagenetic difference is attributed to the fact that the activity of early NE-NNE oriented faults and the development of late nearly E-W oriented faults are stronger in the northern well C-1 field than in the central well C-2 field. The structural characteristics resulting from tectonic inversion led to enhanced efficiency in both organic acid supply from underlying source rocks in well C-1 field and export of dissolution products within the diagenetic system when compared with Well C-2 field. Regional tectonic inversion plays a predominant role in improving reservoir quality than sedimentary factors in the study area. While the well C-1 has a higher porosity than well C-1 (well C-1: average 18%, well C-2: average 13.1%), the permeability of well C-1 is worse than that of well C-2, with an average of 14.7 mD and 27.9 mD respectively. The alteration and dissolution associated with tectonic inversion significantly enhance the porosity of sandstone reservoirs. However, the formation of secondary pores and dissolution products can complicate the pore system of reservoirs, thereby reducing the reservoir permeability. Our research aims to provide a better understanding of fluid-rock interactions and genetic mechanisms in gas-bearing sandstone reservoirs under varying degrees of tectonic inversion. This will support pre-drill evaluations of reservoir quality in deeply buried formations as well as other analogous targets.

U‐Pb carbonate dating reveals long‐lived activity of proximal margin extensional faults during the Alpine Tethys rifting

AbstractSyn‐rift extensional faults play a significant role during the early stage of rifting. Constraining the age of faulting, and how and when deformation shifts from the proximal to the distal margin areas, is crucial for the reconstruction of the rifting process. Previous assessments of the structural and temporal evolution of rift‐related faults of the Adria proximal margin have primarily relied on indirect biostratigraphic evidence. Additionally, the majority of rift‐related faults underwent tectonic inversion during the Alpine orogeny. In this study, in‐situ U‐Pb geochronology was applied on syn‐kinematic calcites to unravel the activity of the Amora Fault, a remarkable example of a Jurassic growth fault unaffected by the Alpine orogeny. The obtained ages, spanning from Hettangian to Callovian, extend the AF activity beyond the previously established Early Jurassic time. This chrono‐structural model has significant implications on the role of major extensional faults in focusing deformation throughout the rift system's evolution.

Halokinetically Overprinted Tectonic Inversion of the Penobscot 3D Volume Offshore Nova Scotia, Canada

Halokinetically Overprinted Tectonic Inversion of the Penobscot 3D Volume Offshore Nova Scotia, Canada

An updated chronostratigraphic framework for the Cenozoic sediments of southeast margin of the Tibetan Plateau: Implications for regional tectonics

As one of the most important accommodation zones during the India-Asia collision, the southeast margin of the Tibetan Plateau (SEMTP) is characterized by many large-scale strike-slip faults, a regional low-relief relict that has been deeply incised by several continental scale rivers that originate from central Tibet, and numerous plant and vertebrate fossil biotas residing in Cenozoic sedimentary basins. Therefore, the SEMTP not only provides a meaningful constraint on the geodynamic evolution of the Tibetan Plateau, but also serves as an exemplar to understand the various interactions among surface uplift, drainage network reorganization, climate change, and biodiversity. Precise dating of Cenozoic sediments in the basins of the SEMTP is crucial for understanding these processes. Previously, the geochronologic framework of Cenozoic sediments in the SEMTP largely relied on fossils and regional stratigraphic correlations, which often involved circular reasoning and large uncertainties. In the past two decades, high-resolution magnetostratigraphy, detrital zircon geochronology, and isotopic dating of interbedded tephra layers have been carried out on SEMTP Cenozoic sedimentary basins in Yunnan and eastern Xizang provinces, SW China. Using these new data, we build a revised chronostratigraphic framework for Cenozoic sediments in SEMTP, and use this updated temporal framework to contextualize regional tectonics and climate change. The new chronostratigraphic framework shows that (1) many of the “Neogene” sedimentary basins based on plant fossils and regional lithostratigraphic correlation in the SEMTP were actually formed in the late Eocene and early Oligocene; (2) most of the Paleogene sedimentary successions in the SEMTP ended at the late Eocene-early Oligocene and were unconformably overlaid by Middle-Late Miocene sediments. Oligocene-Early Miocene sediments are often regionally absent. Sedimentary structures within the basin successions show that Paleogene basins were generally formed in compressional settings while the Late Miocene basins were mostly developed in extensional settings. The new chronostratigraphic framework, together with analyses of sedimentary basin structures, suggests that the SEMTP began to experience crustal shortening early in the India-Asia collision (∼50 Ma), producing Paleogene sedimentary basins and giving rise to the subsequent widespread surface uplift and regional erosion in the Oligocene-Middle Miocene. Tectonic inversion from compression to extension since the Middle Miocene precludes significant uplift of the SEMTP after this time, which may be related to geodynamic changes in the evolution of the Tibetan Plateau.