Tectonic Instability Research Articles

Morphometric Analysis of Tectonically Active Bhimtal-Naukuchiatal Lake Basin, Kumaun Himalaya

Bhimtal-Naukuchiatal region, which is an integral part of the Kumaun Lesser Himalaya, is sensitive to natural disasters and has a fragile environment as a result of neotectonic activity along the thrust and secondary thrust/faults. With regard to neotectonic activity, this study aims to comprehend the tectonic instability of the basin. Morphometric analysis is a computable research of landforms that is crucial to understanding how the landscape has evolved in response to nearby tectonic activity. In present exercise we have calculated ten morphometric indices, viz., Valley floor width-height ratio (Vf), Hypsometric Integral (HI), Stream-Length gradient Index (SL), Bifurcation ratio (Rb), Drainage density (Dd), Stream Order (Sµ) and average Sinuosity (S), Relief (H), steepness (Ksn), Chi integral (?) and Asymmetric Factor (AF). The result shows low values of Vf indicate high upliftment rate, more incision and less channel down cutting. Most morphometric results suggest tilted basin, resulting in V-shaped valleys and a distorted and unstable longitudinal profile, which indicate the area is governed by both tectonics and lithology. The field geomorphic features along with the software based calculations suggest that the Bhowali-Bhimtal-Naukuchiatal is tectonically active zone.

Distal fluvial to lacustrine/palustrine carbonate facies of the El-Ris Formation (Late Miocene?) at the Bahariya Depression, Western Desert, Egypt: Depositional model and controls

This article aims to discuss the distal fluvial to lacustrine/palustrine carbonate facies of the El-Ris Formation (Late Miocene?) in the Bahariya Depression (Western Desert, Egypt), in terms of their depositional evolution and factors (base-level, climate, tectonics) controlling deposition. The El-Ris Formation disconformably overlies the Lower Cenomanian Bahariya Formation. It is up to 11 m thick, and includes siliciclastic facies, followed upward by carbonate facies. The siliciclastic facies consist of greenish-white, fine-grained calcareous sandstones interbedded with subordinate yellowish-brown mudrocks having insects ichnofossils reflecting deposition in a distal fluvial distributary system. The carbonate facies include the fossiliferous (mostly ostracods and a few dispersed gastropods, Lanistes carinatus,) fine crystalline lacustrine/palustrine carbonates, and calcretes-dolocretes. The lacustrine/palustrine beds are grey to pale-yellow colored massive dolomitic beds, with exposure features, reflecting deposition in a shallow, low-gradient (marginal) lake with frequent base-level changes. Calcretes-dolocretes are nodular to massive orange beds, developed at the expense of siliciclastic facies, that formed a fringe between the distal alluvial and central lacustrine-palustrine environments. Palustrine carbonate and duricrust (calcrete/dolocrete) facies increase progressively toward the top of the studied rock unit. The development of silica nodules in the palustrine facies is a result of intense evaporation just above the water table. Silica could have been released by silicate dissolution from the host alluvial deposits into the groundwater. δ13C and δ18O data indicate a hydrologically closed palustrine/lacustrine environment fed by meteoric waters, that originally precipitated calcite. Progressive evaporation of freshwater in this closed system led to dolomitization. The upward increase of carbonates in the El-Ris Formation reflects a progressive decrease of a terrigenous clastic supply in the source area and a dominance of carbonate development in the study area. During the deposition of the El-Ris Formation, the climate had marked more arid seasons with fewer intermittent humid periods. Also, the tectonic influence cannot be ruled out, since tectonic instability led to the creation of the basin depression and subsequent accommodation space that made the deposition of the El-Ris Formation.

Evolution of the Limpopo River Basin in Botswana based on morphometric and morphotectonic features from selected rivers using GIS techniques

ABSTRACT This study used morphometric techniques to generate new information describing the evolution and hydrogeological behaviour of the Limpopo River Basin in Botswana, based on the analysis of drainage surface features, form, and size. Drainage basins provide basic information on their evolution, which, when quantified, yield information on the interaction between tectonics, climatic, and surface processes. Drainage networks were extracted from the Shuttle Radar Topographic Mission (SRTM) Digital Elevation Model (DEM) (90 m × 90 m), and subsequently, morphometry indices were computed using ArcGIS 10.5. Drainage network extraction was performed using the Arc Hydro extension in ArcGIS 10.5. ArcGIS 10.5 image processing technique was used to extract lineaments and create rose diagrams. The results showed that the Limpopo sub-basins in Botswana were drained by fourth- and fifth-order streams, with a total drainage area of 107, 871 km2. Additionally, the basin asymmetry and mean bifurcation ratios showed tilting in the sub-basins, suggesting tectonic instability and structural control in a low – to-moderate active tectonic zone. The sub-basins also had a coarse texture, indicating a high infiltration capacity. These results are essential for planning and managing watershed systems, flood risk assessment, and potential groundwater assessment for the different sub-basins of the Limpopo River Basin in Botswana.

The 2013 Slab‐Wide Kamchatka Earthquake Sequence

AbstractStudies of initiation of large earthquakes are usually focused on frictional instabilities occurring in the near vicinity of the future rupture. Possible contributions of long‐distance interactions with large‐scale tectonic instabilities remain unknown. Here we analyze seismic catalogs and geodetic time series during a few months preceding the 2013 M = 8.3 deep‐focus Okhotsk earthquake. This deep‐focus event is preceded by four intense seismic clusters in the seismogenic zone. GNSS time series in Kamchatka revealed a transient landward motion episode 1 month prior to the mainshock, consistent with an increase of seismogenic zone loading. This transient loading episode is accompanied by a doubling of the intermediate depth seismicity rate suggesting a transient slab pull as the origin. These observations question the constant subducting velocity hypotheses and may have implications in the understanding of the long‐distance along‐slab stress interactions and in their contribution to initiation of large deep‐focus earthquakes.

Volcanic, tectonic and climate controls on lacustrine sedimentary supplies over the last millenia in NE Chilean Patagonia (Lake Esponja, Aysen, 45°S)

The environmental variability of Northern Chilean Patagonia during the last millennia is evaluated using a multi-proxy analysis of sediment cores from Lake Esponja (45°S 72°W) to decipher if the sediment deposition is controlled by volcanic eruptions, landslides induced by earthquake or heavy rainfall. The lake is located in a glacio-tectonic valley in Patagonia. The organic-rich clayey silt sediment with low biogenic silica content was analysed for grain size, magnetic susceptibility, organic matter, biogenic silica content and diatom assemblages, mineralogy (X-ray diffraction), organic (IRMS C and N analyses) and inorganic (XRF core-scanner) geochemistry and glass shard major composition (Microprobe, SEM). The combination of 210Pb, 137Cs, 14C and tephrochronology indicates an averaged accumulation rate of 0.4 mm/year, leading to a record of ~3.5 kyr within 154 cm. The sedimentary geochemistry records changes in volcanic supplies, diatom productivity and detrital inputs. The sediments were interrupted by millimetric to centimetric layers corresponding to tephra deposition related to explosive eruptions of nearby volcanoes Macá, Melimoyu and Hudson. Concerning the diatoms, the dominant planktonic species (80–150 cm) are replaced by benthic species in a transition interval (55–80 cm) and then by Surirella spp. in the upper core. This last genus indicates a closure of the basin ~2 ka ago, probably related to an uplift linked to a rejuvenation of the Mañihuales fault. This local change could reflect regional tectonic instability. Indeed, a partial earthquake rupture occurred around ~AD100 along the southern part of the Valdivia segment, recorded as a mass transport deposit in Aysén fjord sedimentation. The fine detrital input varies over time with more variable Si/Al values in the lower part of the LEs14 core than in the upper 80 cm. The higher values may reflect wetter conditions, leading to an higher lake level and more turbid conditions in agreement with changes in diatom assemblages.

Revisiting Mt Fuji’s groundwater origins with helium, vanadium and environmental DNA tracers

Known locally as the water mountain, for millennia Japan’s iconic Mt Fuji has provided safe drinking water to millions of people via a vast network of groundwater and freshwater springs. Groundwater, which is recharged at high elevations, flows down Fuji’s flanks within three basaltic aquifers, ultimately forming countless pristine freshwater springs among Fuji’s foothills. Here we challenge the current conceptual model of Fuji being a simple system of laminar groundwater flow with little to no vertical exchange between its three aquifers. This model contrasts strongly with Fuji’s extreme tectonic instability due to its unique location on top of the only known continental trench–trench–trench triple junction, its complex geology and its unusual microbial spring water communities. On the basis of a unique combination of microbial environmental DNA, vanadium and helium tracers, we provide evidence for prevailing deep circulation and a previously unknown deep groundwater contribution to Fuji’s freshwater springs. The most substantial deep groundwater upwelling has been found along Japan’s most tectonically active region, the Fujikawa-kako Fault Zone. Our findings broaden the hydrogeological understanding of Fuji and demonstrate the vast potential of combining environmental DNA, on-site noble gas and trace element analyses for groundwater science.

Sandstone petrofacies, deformational events and the dynamic of the Valle Fértil Lineament during the late Paleozoic (Paganzo Basin, northwestern Argentina)

The behavior during the late Paleozoic of the Valle Fértil Lineament, a first-order structural element placed along the suture between Cuyania and Pampia Terranes in northwest Argentina, is analyzed. The study was undertaken following three different lines of research: 1) the analysis of compositional changes of Carboniferous and Permian sandstones, 2) the interpretation of sizeable soft-sediment deformation, and 3) the analysis of the stratigraphic relationships along and away from the Valle Fértil megashear zone. At the Guandacol Hill, three sandstones petrofacies were recognized in the Carboniferous and Permian Guandacol, Tupe and Patquía formations: quartzolithic (Q-L), quartzofeldspathic (Q-F), and lithic-volcanic (L-V). The vertical distribution of these petrofacies allows distinguishing four stratigraphic intervals. The first, which corresponds to the uppermost part of the Guandacol Formation and the lower Tupe Formation, displays a marked alternation between Q-L and Q-F petrofacies, indicating supply from the metamorphic basement of the local Umango-Maz Block (Q-L) and from granitoids of the Sierras Pampeanas System (Q-F). The second interval, corresponding to the upper Tupe Formation, is widely dominated by Q-F petrofacies owing to the progradation of arkosic wedges from the Sierras Pampeanas System and a limited contribution of the Umango-Maz Block. The third interval, the lower Patquía Formation, shows a sharp change in the composition of the sandstones since they are dominated by acidic and intermediate volcanic fragments (L-V petrofacies), suggesting the establishment of a volcanic field in the area. Finally, the fourth stratigraphic interval, the middle Patquía Formation, is again composed of the Q-F petrofacies indicating a new episode of progradation of arkosic wedges from the Sierras Pampeanas System. Evidence of tectonic activity during the deposition of the Guandacol Formation is also suggested by the presence of different scales of syn-sedimentary deformational structures, from small-scale soft-deformation to large-scale mass transport deposits. This deformational belt only occurs along the Valle Fértil Lineament and is not recorded in other localities of the Paganzo Basin located either to the west or east of the megashear zone. Regional analysis of the late Paleozoic stratigraphy provides additional information about tectonic instability. Firstly, while the contact between the Guandacol and Tupe Formations is concordant throughout the basin, some localities close to the Valle Fértil Lineament show an angular unconformable relationship. Secondly, in the Agua de la Peña creek, located just on the trace of the Valle Fértil Lineament, the Permian Talampaya Formation covers through an angular unconformity the Guandacol Formation, a relation not observed in other areas of the Paganzo Basin. Thirdly, the presence of Carboniferous magmatism, including volcanic rocks in the Guandacol Hill and a granitic intrusion in the Veladero Hill, has been only observed along the Valle Fértil Lineament.

The effects of astronomically forced climate change on hemipelagic carbonate sedimentation in a tectonically active setting: the Albian Mioño Formation in Castro Urdiales (Cantabria, N Spain)

Our understanding of the stratigraphic expression of astronomically driven climate-change cycles in the Milankovitch frequency band has improved significantly in recent decades. However, several aspects have been little studied to date, such as the nature of the climatically regulated environmental processes that ultimately control cyclic sedimentation. Similarly, relatively little is known about the expression of Milankovitch cycles in successions accumulated in tectonically active basins. In order to fill this knowledge gap, the Albian hemipelagic deposits of the Mioño Formation exposed in Castro Urdiales (Basque-Cantabrian Basin) are studied herein. These deposits were accumulated during a rifting phase with strong tectonic activity. The sedimentological, petrographic and cyclostratigraphic analysis demonstrates that, despite the synsedimentary tectonic instabilities and some diagenetic overprinting, the hemipelagic carbonate alternation was astronomically forced 110.68–110.47 Ma. Seasonality fluctuations driven by precession cycles caused periodic (20 ky) variations in the rate of carbonate productivity (abundance of pelagic calcareous plankton and micrite exported from adjacent shallow-water areas) and/or siliceous dilution (terrestrially derived siliciclastic sediment supply and siliceous particle production by sponges). These variations resulted in the formation of marly limestone beds when annual seasonality was low (i.e., boreal summer at aphelion, winter at perihelion) and the accumulation of marlstones when seasonality increased (i.e., boreal summer at perihelion, winter at aphelion). The incidence of these processes increased and decreased in line with seasonality modulation by short-eccentricity cycles of 100 ky. In conclusion, this study shows that Milankovitch cycles can be reliably recorded in hemipelagic successions accumulated in tectonically active settings if sediment gravity flows or other disturbances do not affect autochthonous sedimentation.

Deep submarine infiltration of altered geothermal groundwater on the south Chilean Margin

Submarine groundwater discharge is increasingly recognized as an important component of the oceanic geochemical budget, but knowledge of the distribution of this phenomenon is limited. To date, reports of meteoric inputs to marine sediments are typically limited to shallow shelf and coastal environments, whereas contributions of freshwater along deeper sections of tectonically active margins have generally been attributed to silicate diagenesis, mineral dehydration, or methane hydrate dissociation. Here, using geochemical fingerprinting of pore water data from Site J1003 recovered from the Chilean Margin during D/V JOIDES Resolution Expedition 379 T, we show that substantial offshore freshening reflects deep and focused contributions of meteorically modified geothermal groundwater, which is likely sourced from a reservoir ~2.8 km deep in the Aysén region of Patagonia and infiltrated marine sediments during or shortly after the last glacial period. Emplacement of fossil groundwaters reflects an apparently ubiquitous phenomenon in margin sediments globally, but our results now identify an unappreciated locus of deep submarine groundwater discharge along active margins with potential implications for coastal biogeochemical processes and tectonic instability.

Stratigraphic architecture of the Cenozoic Dugong Supersequence: implications for the late post-breakup development of the Eucla Basin, southern Australian continental margin

ABSTRACTThis study presents an appraisal of the Middle Eocene–Quaternary Dugong Supersequence of the Eucla Basin, offshore southern Australia. It combines details of the rock record with seismic-stratigraphical information, and the resulting stratigraphic framework provides constraints on the nature of the late post-breakup development of the southern Australian continental margin. It is well established that the onshore-to-mid-shelf succession comprises a predominantly aggrading-to-prograding unconformity-bounded succession of carbonate platform deposits; however, our analysis of the outer shelf–upper slope section challenges the widely held view that this shelf-margin wedge represents a distally steepened prograding carbonate ramp primarily modulated by global eustasy. Instead, our results show that the Middle Eocene–Quaternary succession is punctuated by a series of unconformities that reflect a persistent tectonic instability and differential vertical movements throughout the late post-breakup period, the genesis of which is most closely related to tectonic events. Moreover, the upper slope clinoform succession was constructed and shaped predominantly by alongslope processes, and four different contourite drift types are recognised based on their seismic-stratigraphic expression: elongate mounded drift (Quaternary); infill drift (Pliocene); plastered drift (Oligocene); and separated drift (Middle–Upper Eocene). The Quaternary drift – herein termed the ‘Eyre Terrace Drift’ – is a spectacular basin-scale deposit, over 500 m thick and traced for up to 200 km along the upper slope Eyre Terrace. Upslope-migrating sediment waves are associated with this drift. Key sedimentary attributes consistent with a contourite origin include fine-grained sediment, multi-scale gradational bed contacts and pervasive bioturbation. There is also evidence of episodic downslope mass-movement processes ranging from the large-scale Late Neogene Slide, which extends downslope for 15–20 km, to sporadic slumped beds and turbidites recovered in boreholes. The interaction of alongslope and downslope processes indicates a more dynamic sedimentary setting than previously assumed along the outer margin of the Eucla Basin.

Sedimentary evolution of tectonically-controlled Cenozoic shallow marine glaucony, fluviatile and lacustrine-palustrine deposits at Bahariya region, Egypt

The Cenozoic basin of the tectonically-active Bahariya region (Western Desert, Egypt) contains a unique paleoenvironmental, paleotectonic and paleoclimatic record displaying a large variety of sedimentary facies, stratigraphic discontinuities, and geochemical changes. This study deals with the sedimentary evolution and tectono-stratigraphic modelling of shallow marine Upper Eocene glaucony facies (Upper Hamra Formation) that changes upward into a sequence of Oligocene continental fluviatile sandstone-calcrete (Radwan Formation) and then into Miocene lacustrine-palustrine deposits (Continental Carbonate Unit). The tectonic instability of the Bahariya basin can be deduced from occurrence of sedimentary discontinuities, development of pedogenic features, and unconformable relations among rock units. Both sedimentation pattern and facies distribution seem to have been controlled by fault activity through time. Two types of glaucony facies (pelloidal and massive smectitic glaucony) were deposited in a narrow sub-basin along main faults reaching the basin center. These faults also conditioned the deposition of the Oligocene fluviatile sandstone and Miocene lacustrine-palustrine carbonates. A transition from greenhouse (global warming event of the Middle Eocene Climatic Optimum) to icehouse climatic conditions (Eocene-Oligocene climatic cooling) is probably represented by the deposition of the shallow marine glaucony facies during the Priabonian. Semi-arid to sub-humid conditions were dominant during the formation of the Oligocene calcretes and the Miocene lacustrine-palustrine carbonates. The latter carbonate deposits consist of basal thin-bedded chert deposits displaying hydro-plastic sedimentary structures that are possibly coeval with the Miocene basaltic extrusions along faulted and low-lying areas. We conclude that both paleoclimate and intraplate tectonic activity related to the Red Sea rifting influenced the pattern of sea level, continental drainage, sedimentation rate and clastic supply since the Priabonian up to the middle Miocene in the Bahariya basin.

Palaeogeographic reconstruction and sequence architecture of the middle‐upper Jurassic successions of Hawraman Basin (NW Iran): Implications for tectono‐depositional processes of the northeastern passive margin of the Arabian Plate

The middle‐upper Jurassic successions (Sargelu, Najmah, and Gotnia formations) of the NW sector of the Zagros Mountain belt are studied to generate a sequence stratigraphic model that helps to understand the Jurassic tectono‐depositional processes and palaeogeographic reconstructions of the northeastern passive margin of the Arabian Plate. The major geological structures observed in northwestern Iran indicate the predominance of an extensional deformation during the Toarcian to Aalenian owing to the eastern Mediterranean rifting. This extensional regime reached its maximum from the Early to Middle Jurassic, causing the fragmentation/drowning of the long‐lived Triassic to Early Jurassic carbonate platform and the development of the Hawraman intrashelf basin (HIB). Associated changes in marine current dynamics, trophic conditions, and degree of substrate oxygenation led to the bloom of oligotypical biota (Bositra limestones) creating unfavourable conditions for the development of other benthic communities (Sargelu Formation). Later, from the Callovian to Oxfordian, changes in carbonate production types (switch from the Bositra filament facies to the stromatolitic‐thrombolitic boundstones) remarkably decreased the dip angle of the depositional profile (Najmah Formation). A second‐order tectono‐eustatic cycle (a major long‐term transgressive/regressive [T/R] cycle) including six minor short‐term T/R facies cycles (TR1–TR6) is identified in the study area. The development of the T/R facies cycles during the Middle Jurassic (TR1–TR3; give‐up sequences; Sargelu Formation) as a result of combined global eustatic transgression and linear subsidence resulted in drowning and backstepping of the platform. In contrast, the short‐term cycles that developed in the upper Jurassic (TR4–TR6; keep‐up sequences; Najmah and Gotnia formations), following a sea‐level fall, resulted in progressive shallowing of the carbonate platform. This study suggests that extensional deformation of the area reached its peak in the transition of the Early to Middle Jurassic, leading to the creation of HIB, but either decreased or played a subordinate role to eustatic sea‐level variations during the deposition of the TR1–TR3 facies cycles (Bajocian‐Callovian). Changes in tectonic regime from an extensional deformation (Early Jurassic) to cooling subsidence (Middle Jurassic), accompanied by a long‐term transgressive sea‐level trend during the Middle Jurassic, were important factors in the development of anoxic trough environments with the deposition of organic‐rich intervals, represented by the TR1–TR3 facies cycles. Tectonic instability (tectonic uplift plus considerable differential subsidence due to the reactivation of faults) in the eastern margin of the Arabian platform during the Late Jurassic led to the development of the TR4–TR6 facies cycles.

Soft‐sediment deformation structures in the Late Messinian Abu Madi Formation, onshore Nile Delta, Egypt: Triggers and tectonostratigraphic implications

The Upper Messinian Abu Madi Formation of the Nile Delta constitutes sediments deposited during the final stage of the Messinian salinity crisis (MSC). Several levels of soft‐sediment deformation structures (SSDS) were observed in the transgressive heterolithic fluvial facies deposited adjacent to the deep‐seated faults. The most common deformation features include diapiric structures, intraformational lithoclastic breccia, small‐scale normal faults, slump folds, and liquefied beds. Such association of SSDS typically resembles those described elsewhere as generated by a complex interplay of gravity‐driven and seismically induced liquefaction processes. The pore pressure measurements revealed high pore fluid density ~ 9.1 ppg equivalent density values which reflect a mild pressure disequilibrium in Abu Madi sediments. Pressure disequilibration is observed all over the studied section of the Abu Madi Formation and is not only restricted to the fluvial channel sandstones deposited during rapid loading. Therefore, allogenic seismic activity has been proposed as the main trigger for pressure disequilibrium and the development of SSDS in the Abu Madi Formation. The heterolithic nature of the Abu Madi sediments as well as the scarcity of bioturbation provides the favourable conditions for the preservation of the seismically induced deformation. The lateral variation in thickness suggests deposition of the Abu Madi Formation during periods of active subsidence which promotes the generation of the SSDS. Late MSC tectonism likely controlled the evolution and sedimentary facies variability of the Abu Madi canyon‐infill system, and therefore the distribution of Abu Madi facies varies significantly over very short distances. Abu Madi SSDS follows the spatial distribution observed in other “lago‐mare” deposits (e.g., Foes Formation and SE Spain), characterized by spatial variability and vertical rhythmic alternation between deformed and non‐deformed layers. Accordingly, regional tectonic instability in the circum‐Mediterranean margins during the late stage of the MSC is proposed.

Tectonic instability of the petroliferous upper Assam valley (NE India): A geomorphic approach

Tectonic instability of the petroliferous upper Assam valley (NE India): A geomorphic approach

Lineaments Extraction and Analysis Using Landsat 8 (OLI/TIRS) in the Northeast of Morocco

Northeastern Morocco is made up of several units belonging to the Alpine belt and its foreland. Miocene to plio-quaternary volcanic rocks with variable mineralogy and geochemistry dominate the geology of this region. The presence of active faults in different directions explains the high tectonic instability and the high frequency of earthquakes. This study contributes to the effort of understanding the geothermal potential of the Northeast of Morocco. Heat source and permeability are both key factors in the geothermal process. Indeed, lineaments analysis constrains the structures and their directions and indicates severely faulted zones, which are the most promising areas for geothermal exploration. For this purpose, we used Landsat data combined with geological and structural maps available in this region. Different image processing techniques were applied including band ratio (6/2) and directional filters. To validate the results, we conducted a comparative study between linear structures, available geological data, and previous studies. Results of the automatic extraction method of lineaments from Landsat 8 OLI/TIRS indicate three main lineament systems: 1) a NE-SW system ranging from N40 to N70; 2) an N-S system ranging from N10 to N45; 3) an EW to WNW-ESE systems ranging from N80 to N120. Most of lineaments extracted are localized in Kebdana, Amejjaou, Nador and Melilla regions. Compared to previous studies, the NE-SW system is consistent with an extensive period (Tortonian to Pliocene); the NW-SE system is consistent with the last compressive episode (Pliocene); the N-S system is consistent with the first compressive period (Late/End Tortonian).

Determinants of zoogeographical boundaries differ between vertebrate groups

AbstractAimWorldwide distribution patterns of living animals are structured in multiple zoogeographical regions, characterized by faunas with homogeneous composition that are separated by sharp boundaries. These zoogeographical regions can differ depending on the considered animal group, probably because they have distinct characteristics such as dispersal, metabolism, or evolutionary history, and thus divergent responses to major biogeographical drivers, such as tectonic movements, abrupt climate transitions and orographic barriers. Here, we tested if the drivers of biogeographical boundaries are different between vertebrate classes with strongly divergent traits and evolutionary history.LocationGlobal.Time periodPresent.Major taxa studiedAmphibians, birds and mammals.MethodsWe focused on terrestrial biogeographical boundaries, considering multiple potential drivers: spatial heterogeneity of present‐day climate, altitudinal variation, long‐term tectonic movements and past climate change (temperature). We used spatially explicit regression models and geographically weighted regressions to select and quantify the factors explaining the position of the biogeographical boundaries between vertebrate classes.ResultsFor mammals, tectonic movements, abrupt climatic transitions and orographic barriers jointly determined extant biogeographical boundaries, with tectonic movements being the most important. For birds, abrupt climatic transitions played the strongest role, while the effect of orographic barriers was weak. For amphibians, biogeographical boundaries mostly corresponded to areas with abrupt climatic transitions. The strongest transitions of amphibian faunas occur in areas with abrupt shifts of temperature and precipitation regimes.Main conclusionsOur analyses confirmed that different drivers have jointly shaped the global vertebrate biogeographical regions, and highlight that taxa with different features show heterogeneous responses across the globe. Eco‐physiological constraints likely increase the importance of spatial heterogeneity of climate, while dispersal limitations magnify the relevance of physical barriers (mountain chains and long‐term tectonic instability). Integrating among‐taxa heterogeneity into analyses thus provides a more complete view of how different processes determine biodiversity variation across the globe.

Geochemistry and Petrogenetic Features of Metasediments in Northern Part of Kushaka and Birnin Gwari Schist Belts NW Nigeria

The Kushaka and Birnin Gwari metasediments and associated banded iron formations constitute important lithological units within the Precambrian Basement Complex. They were studied to evaluate their compositional characteristics and petrogenesis in order to contribute further to the understanding of the geodynamic evolution of Nigeria’s Schist belts. The Kushaka metasediments comprise quartzite, graphite and sulphur bearing staurolite-muscovite quartz schist interbedded with Banded Iron Formations (BIFs) while the Birnin Gwari schist comprise staurolite-biotite quartz schists with lithic (angular to rounded clastic quartz, schistose, volcanic and quartzo-feldspathic) sandstones. These schists are associated with fissile and ferruginous quartzite, banded and granitic gneisses, basalts and amphibolites. Petrographic work revealed varying proportions of quartz, staurolite, biotite and muscovite with subordinate iron-oxide minerals. Geochemically the metasediments in the Kushaka are enriched in SiO 2 (61.23 to 65.99 wt %) with elevated values of Al 2 O 3 (16.53 – 20.93 wt %), Ba, V, W, La, Nb, Nd, Rb, Th and Zr; while the Birnin Gwari schists, even though enriched in SiO 2 (63.03 to 65.13 wt %), has moderately elevated Al 2 O 3 (15.4 – 15.16 wt %) values but is depleted these trace elements. Field and geochemical characterization of the Kushaka metasediments suggests peraluminous, tholeiite and calc-alkaline character; arkosic and shale-greywacke sedimentary protoliths derived from quartzose sedimentary and granite-quartz monzonite provenance. Calculated ICV values of 0.52 - 0.99 and occurrences of graphite and sulphur in the Kushaka metasediment suggests shallow stable shelf-type sediment of carbonate and iron formations in a reducing environment with matured sedimentary protolith. The Birnin Gwari metasediments on the other hand have a peraluminous and calc-alkaline character, inherited from shale-greywacke and quartzose sedimentary protoliths derived from granodioritic and granite-quartz monzonite provenance. ICV values of 1.12 – 1.18 and angular and volcanic clasts suggest rapid subsidence of basin during genesis and / or tectonic instability in the surrounding environment with immature sedimentary protolith. This is an indication of two contrasting environment in an arc setting with contribution from basaltic and andesitic detritus. Available geochronological data on granite and granitic gneisses have ascribed the Kushaka schist belt to Kibaran and the Birnin Gwari schist belt a Pan-African age. Keywords : Metasediments, protolith, Kushaka, Birnin Gwari, quartzite, provenance, shale, greywacke. DOI: 10.7176/JEES/11-16-05 Publication date: June 30 th 2021

Late Pleistocene–Holocene stress in the South American intraplate evidenced by tectonic instability in central Amazonia

Abstract Documenting neotectonic instabilities and determining the style and time of deformation in the vast and difficult to access central Amazonia region is challenging. We focus on these issues by investigating a large area of the Negro River drainage basin, applying morphostructural analysis based on synthetic aperture radar data. The digital elevation models of the C-band Shuttle Radar Topography Mission and the L-band Protection System of Amazonia were used as the database. We also used subsurface magnetic information from the Earth Magnetic Anomaly Grid global model to validate the morphostructures. The results revealed NW-oriented morphostructural lineaments bounding multiple depositional valley fills. These were extensively fragmented to form regularly distributed en échelon rectangular blocks commonly offset horizontally by several kilometers. Strike-slip faults and oblique, either normal or reverse, faults are present. These structures were reactivated along the main NE- and SW-oriented regional structural trends due to N-S-oriented horizontal compression and E-W-oriented horizontal extension in the late Pleistocene and Holocene. The extensive neotectonic faulting results from the interplay of plate motion and Andean uplifting since the late Pleistocene, combined with local stresses.

The Upper Jurassic Garedu Red Bed Formation of the northern Tabas Block: elucidating Late Cimmerian tectonics in east-Central Iran

The Garedu Red Bed Formation (GRBF) of the northern Tabas Block (Central-East Iranian Microcontinent, CEIM) is a lithologically variable, up to 500-m-thick, predominantly continental unit. It rests gradually or unconformably on marine limestones of the Esfandiar Subgroup (Callovian–Oxfordian) and is assigned to the Kimmeridgian–Tithonian. In the lower part, it consists of pebble- to boulder-sized conglomerates/breccias composed of limestone clasts intercalated with calcareous sandstones, litho-/bioclastic rudstones and lacustrine carbonates. Up-section, sharp-based pebbly sandstones and red silt-/fine-grained sandstones of braided river origin predominate. Palaeocurrent data suggest a principal sediment transport from west to east and a lateral interfingering of the GRBF with marine greenish marls of the Korond Formation at the eastern margin of the Tabas Block. Westwards, the GRBF grades into the playa deposits of the Magu Gypsum Formation. Red colours and common calcretes suggest arid to semi-arid climatic conditions. The onset of Garedu Red Bed deposition indicates a major geodynamic change with the onset of compressive tectonics of the Late Cimmerian Tectonic Event (LCTE), being strongest at the eastern margin of the northern Tabas Block. When traced southwards, the same tectonic event is expressed by extension, indicating a shift in tectonic style along the boundary fault between the Tabas and Lut blocks. The complex Upper Jurassic facies distribution as well as the spatio-temporal changes in tectonic regime along the block-bounding faults are explained by the onset of counterclockwise vertical-axis rotation of the CEIM in the Kimmeridgian. The block boundaries accommodated the rotation by right-lateral strike slip, transpressional in today’s northern and transtensional in today’s southern segments of the block-bounding faults. Rotation occurred within bracketing transcurrent faults and continued into the Early Cretaceous, finally resulting in the opening of narrow oceanic basins encircling the CEIM. Palaeogeographically, the GRBF is part of a suite of red bed formations not only present on the CEIM, but also along the Sanandaj-Sirjan Zone (NW Iran), in northeastern Iran and beyond, indicating inter-regional tectonic instability, uplift and erosion under (semi-)arid climatic conditions across the Jurassic–Cretaceous boundary. Thus, even if our geodynamic model successfully explains Late Jurassic tectonic rotations, fault motions and facies distribution for the CEIM, the basic cause of the LCTE still remains enigmatic.

A geocellular modelling workflow for partially dolomitized remobilized carbonates: An example from the Hammam Faraun Fault block, Gulf of Suez, Egypt

Constructing geocellular models of carbonate rocks using standard software is challenging since most of modelling packages are designed, first and foremost, to represent siliciclastic depositional systems, where rock properties are strongly facies-controlled. The distribution and components of carbonate depositional facies vary drastically across the geological timescale as a result of paleoclimate and its effects on carbonate-producing biota. Furthermore, reservoir architecture is less strongly controlled by depositional environment than in clastic settings, and rock physical properties, including fracture networks, are controlled by both primary components and their subsequent diagenetic alteration. This means that rock property distribution is less predictable than in siliciclastic systems, and less well represented by geocellular models that are designed to represent sedimentary architecture. In other words, in carbonate systems, the depositional and diagenetic history needs to be reconstructed in order to successfully model reservoir properties.In this study a geocellular model was created by using a well-characterised outcrop analogue obtained from the Hammam Faraun Fault (HFF) Block, located on the eastern coast of the Gulf of Suez in Sinai, Egypt. This model integrates sedimentological, petrophysical, diagenetic, and structural information into a single database. The workflow utilizes the regional tectonic history, upscaled lithological logs, and two-stage facies modelling (reflecting in and ex situ depositional facies) and resulted in the creation a realistic model of remobilized carbonates that were deposited on the slope of a carbonate platform during a period of tectonic instability. Diagenetic overprinting was achieved using probability functions to reflect the history of burial, rifting, and the spatial relationship of stratabound and non-stratabound dolostone bodies. The study demonstrates a workflow for modelling mass-transport carbonate facies and multistage fault-related diagenesis so that flow controlling facies and diagenetically altered poroperm and fracture networks are accurately represented using commercially available modelling software, and in particular demonstrates how diagenetically controlled geobodies can be captured using simple algorithms.