Radiation Technology Research Articles

Position Paper of the German Society for Interventional Radiology and Minimally Invasive Therapy (DeGIR) and the German Roentgen Society (DRG) on Structural and Professional Requirements in Interventional Oncology.

Interventional oncology (IO) employs various techniques to enable minimally invasive, image-guided treatment of tumor diseases with both curative and palliative goals. Additionally, it significantly contributes to managing tumor-related and perioperative complications, offering diverse supportive procedures for patients at all stages of their diseases. The execution of IO procedures places unique demands on the equipment, personnel, and structural organization of radiological clinics, necessitating specific expertise from interventional radiologists.This position paper aims to comprehensively outline the multifaceted aspects of IO and discuss the requisite criteria for hospitals, radiological clinics, and interventional radiologists (IRs). Furthermore, it underscores overarching considerations of quality assurance that clinics and professional societies should prioritize.The requirements for hospitals, radiological clinics, and IRs are varied and demand not only a high level of proficiency in performing IO procedures but also in-depth knowledge of the differential therapy for various tumor diseases. This expertise is essential for effectively serving as clinical partners in the interdisciplinary treatment of oncologic patients. Additionally, a thorough understanding and safe handling of ionizing radiation technologies, along with proficiency in radiation protection methods, which are fundamental aspects of radiological specialist training, is crucial for ensuring the safety of IO procedures for both patients and staff. The Deutsche Gesellschaft für Interventionelle Radiologie und minimal-invasive Therapie (DeGIR) and the Cardiovascular and Interventional Radiological Society of Europe (CIRSE) have long-established dedicated quality management programs, accrediting radiology clinics and certifying IRs. These initiatives aim to uphold the highest standards of care and meet the quality expectations set by politics in healthcare system, particularly in the realm of interventional radiology. · The various procedures in the field of interventional oncology (IO) are complex medical interventions that require not only the most advanced technical equipment but also adequate human resources, particularly specialized expertise in interventional radiology, diagnostic imaging, oncology, and radiation protection.. · This expertise is an integral part of the specialized medical training in radiology and is certified by professional societies such as the German Society for Interventional Radiology (DeGIR) and the Cardiovascular and Interventional Radiological Society of Europe (CIRSE).. · Professional societies like DeGIR, CIRSE, and the American Society of Interventional Radiology (SIR) establish the necessary quality assurance framework for comprehensive, high-quality IO therapy through quality assurance (QA) registries, standard operating procedure (SOP) documents, and participation in guideline development.. · Currently, radiology is the only discipline that provides physicians with the theoretical and practical knowledge, skills, and competencies required to perform the demanding procedures in the field of IO through specialized training programs and tailored certification processes.. · Isfort P, Sommer CM, Bruners P et al. Position Paper of the German Society for Interventional Radiology and Minimally Invasive Therapy (DeGIR) and the German Roentgen Society (DRG) on Structural and Professional Requirements in Interventional Oncology. Fortschr Röntgenstr 2024; DOI 10.1055/a-2373-1013.

Wireless Data Transmission through Concrete Structures

Chloride ion presence in the concrete pore solution is an important factor in the initiation of rebar corrosion. Therefore, elevated chloride concentration in the pore solution needs to be detected as early as possible. For this early detection to be achieved, it is ideal to deploy sensors inside the concrete structure itself. This allows real time sampling of the pore solution which is closest to the rebar. To achieve this one needs to have a system based on wireless communication which allow the sensors to communicate within the structure. This would avoid wired communications methods, which impart fragility and implementation difficulties. This literature review paper endeavours to look at the various types of radiation which can be harnessed to penetrate through the opaque concrete structure. Potential data transmission methods utilising Radio Frequency Radiation, Ultrasonic Radiation, X-Ray Radiation and Neutron Beam Radiation physics were reviewed and evaluated against a set of parameters. The paper scores each radiation type against System Size, Power Supply Requirements, Transmission Range, Complexity of Circuits and Safety issues. Through these scores, each transmission technology was graded on its potential to act as the basis on which to build a micrometre sized intra-concrete data transmission system. The paper shows that ultrasonic radiation is the most promising radiation technology for use in this application.

Wireless Data Transmission through Concrete Structures

Chloride ion presence in the concrete pore solution is an important factor in the initiation of rebar corrosion. Therefore, elevated chloride concentration in the pore solution needs to be detected as early as possible. For this early detection to be achieved, it is ideal to deploy sensors inside the concrete structure itself. This allows real time sampling of the pore solution which is closest to the rebar. To achieve this one needs to have a system based on wireless communication which allow the sensors to communicate within the structure. This would avoid wired communications methods, which impart fragility and implementation difficulties. This literature review paper endeavours to look at the various types of radiation which can be harnessed to penetrate through the opaque concrete structure. Potential data transmission methods utilising Radio Frequency Radiation, Ultrasonic Radiation, X-Ray Radiation and Neutron Beam Radiation physics were reviewed and evaluated against a set of parameters. The paper scores each radiation type against System Size, Power Supply Requirements, Transmission Range, Complexity of Circuits and Safety issues. Through these scores, each transmission technology was graded on its potential to act as the basis on which to build a micrometre sized intra-concrete data transmission system. The paper shows that ultrasonic radiation is the most promising radiation technology for use in this application.

Applications, Limitations, and Considerations of Clinical Trials in a Dish

Recent advancements in biotechnology forged the path for clinical trials in dish (CTiDs) to advance as a popular method of experimentation in biomedicine. CTiDs play a fundamental role in translational research through technologies such as induced pluripotent stem cells, whole genome sequencing, and organs-on-a-chip. In this review, we explore advancements that enable these CTiD biotechnologies and their applications in animal testing, disease modeling, and space radiation technologies. Furthermore, this review dissects the advantages and disadvantages of CTiDs, as well as their regulatory considerations. Lastly, we evaluate the challenges that CTiDs pose and the role of CTiDs in future experimentation.

PO0252: Clinical Results of Cervical Cancer Using Various Technologies in Radiation Therapy

PO0252: Clinical Results of Cervical Cancer Using Various Technologies in Radiation Therapy

CT measurement of blood perfusion in hepatocellular carcinoma: from basic principle, measurement methods to clinical application

Hepatocellular carcinoma (HCC) is one of the common and fatal malignant tumors worldwide, and the burden of HCC is particularly severe in China. Physiologically, the blood supply to healthy liver is mainly from the portal vein, supplemented by the hepatic artery. While in the development of HCC, the main source of blood supply to HCC is changed from the portal vein to the hepatic artery. The characteristics of HCC vascularization are important for imaging, surgery, interventional therapy, targeted therapy, etc. Even in the future, with the development of radiation therapy technology, such as proton and heavy ion therapy and artificial intelligence technology, the dynamic changes in HCC blood perfusion can be used as a new biomarker of tumor activity to provide accurate information on the intensity modulation of radiotherapy, so that accurate measurements of HCC blood perfusion is of great significance in guiding the diagnosis and treatment of HCC. The technologies for measurement of HCC blood perfusion have developed from invasive techniques, such as inert gas scavenging, electromagnetic flowmeter, and radionuclide-labeled erythrocyte elution in the middle of the last century to the present non-invasive techniques of CT. With the development of CT imaging technology in the last 30 years, the CT-based imaging technology can assess the status of organ and tissue perfusion relatively easily and accurately. In this paper, the various CT measurement techniques of blood perfusion in HCC were categorized into three types: semi-quantitative technique, relative quantitative technique, and absolute quantitative technique. Their basic principle, scanning methods, and clinical applications were discussed to provide a reference for the diagnosis and treatment of HCC.

Breast cancer radiobiology: The renaissance of whole breast radiation fractionation (Review).

Breast cancer radiotherapy has evolved significantly, driven by decades of research into fractionation schedules aimed at optimizing treatment efficacy and minimizing toxicity. Initial trials such as NSABP B-06 and EBCTCG meta-analyses established the benefits of adjuvant whole-breast irradiation in reducing local recurrence and improving survival rates. The linear-quadratic (LQ) model provided a framework to understand tissue response to radiation, highlighting the importance of the α/β ratio in determining fractionation sensitivity. The present scoping review aimed to identify and describe hypofractionation regimens for whole breast radiotherapy and evaluate dose differences using the LQ model across proposed α/β ratios. A comprehensive PubMed search for clinical trials published since 2010 on hypo-fractionated regimens was performed. Studies discussing α/β ratios for breast cancer have been also searched. Data on dose, fractions and α/β ratios were collected, and biologically effective dose (BED) and equivalent dose in 2 Gy fractions were calculated. The coefficient of variation for BED varied with α/β ratios, showing the lowest variability for an α/β ratio of ~3 without tumor repopulation and increased with repopulation (BED-kT; k is a constant that depends on the repopulation rate of the tumor, and T is the total treatment time in days). Significant differences in BED variances were observed across α/β ratios (F-statistic 219.6, P<0.0001). START trials (P, A, and B) established α/β ratios of 3-4 Gy for breast cancer and normal tissues, confirming that hypofractionation is as effective as standard fractionation with potentially fewer late toxicities. Subsequent trials, such as FAST and FAST-Forward, demonstrated that ultra-hypofractionation is equivalent in tumor compared with conventional regimens. Further research is needed to gain a stronger understanding of radiobiological properties of breast cancer cells. Advances in radiotherapy technologies and the integration of biomarkers, radiomics and genomics are transforming treatment, moving towards precision medicine.

Recent radiotherapy could reduce heart-related death in patients with esophageal cancer: SEER database analysis

BackgroundThere have been several reports showing that heart-related deaths are common in long-term survivors of esophageal cancer after radiation therapy; however, radiotherapy technology is evolving year by year. This study was carried out using the SEER database to determine whether the frequency of mortality from heart disease after radiotherapy has improved over time in patients with esophageal cancer.MethodsSEER*Stat statistical software version 8.3.9.2 (National Cancer Institute) was used to perform case listing and data extraction. We reviewed causes of death in 8,297 patients who were treated by radiotherapy without surgery between 2004 and 2015 (radiotherapy group). For comparison with this group, we also reviewed causes of death in 5,149 patients who were treated by surgery without radiotherapy (surgery group).ResultsIn the radiotherapy group, the cumulative heart-related death rate in patients with carcinoma in the middle to abdominal esophagus, for which it was considered that the heart was irradiated with a higher dose, was significantly higher than that in patients with carcinoma in the cervical to upper thoracic esophagus (p = 0.017). However, in the surgery group, the cumulative heart-related death rate in patients with carcinoma in the middle to abdominal esophagus tended to be lower than that in patients with carcinoma in the cervical to upper thoracic esophagus (p = 0.063). The cumulative heart-related death rate in patients treated in 2010–2015 was significantly lower than that in patients treated in 2004–2009 in the radiotherapy group (p = 0.011), although the cumulative heart-related death rate was not significantly different between patients treated in 2010–2015 and patients treated in 2004–2009 in the surgery group (p = 0.90).ConclusionsThe results suggest that recent advances in radiotherapy have enabled a reduction in radiation-induced heart disease in patients with esophageal cancer.

Investigation on preparation and properties of gel type 188W/188Re generator

As one of the most important integrated nuclides for diagnosis and treatment in recent years, rhenium-188 (188Re) has a broad scope in the clinical application. Due to the specific properties of such radionuclide, it was mainly provided by the chromatographic 188W-188Re generators. There is no doubt that the application of 188Re in the treatment of various diseases depended on the development of 188W-188Re generator. Considering the high standards of such technology on radioactive activity of 188W and impurity content, a 188W-188Re generator filled with the zirconium tungstate gel has been prepared in this work. The effects of molar ratio of chemical agents, pH, reaction temperature, drying methods, rinsing methods and other conditions on the synthesis of gel particles have been studied. Furthermore, a variety of characterization techniques were used to observe the macro-/micro-morphology and chemical structure of gel particles. It can be concluded that vacuum freeze-dried method could significantly increase the specific surface area, pore size and tungsten content of gel particle. In order to decrease the content of 188W in the elute, a handful of acidic alumina was filled in the bottom of our 188W-188Re generator, an elution and purification integrated-generator was formed. During the first five processes, the nuclear purity of 188Re solution was above 99.99%, the radiochemical purity was approximately 99.5%, the pH value was 5.0–7.0 and the average elution efficiency reached up to 82.7%. In addition, the leakage rate of 188W was low as 1.60 × 10−6, and the peak of elute curve was located at 2 mL without the trailing phenomenon. This work lays a solid foundation for the domestic demand of daughter nuclide 188Re, further makes an outstanding contribution to the application of the radiation therapy technology and the protection of people's health.

Gamma attenuation and radiation shielding performance of CaCu3B2Re2O12 (B[dbnd]Mn, Fe, Co, and Ni) perovskites

In order to identify the importance of perovskites in nuclear science, studies aimed at obtaining the radiation interaction quantities of perovskites are essential. This study computed and analyzed the gamma photon interaction parameters of CaCu3B2Re2O12 (BMn, Fe, Co, and Ni) perovskites to reveal their shielding potentials and comparative advantages against traditional shielding materials. Four samples of ferrimagnetic quaternary perovskites whose chemical structures are summarized as CaCu3B2Re2O12 (BMn (CCMRO1), Fe (CCMRO2), Co (CCMRO3), and Ni (CCMRO4)) were considered for their gamma interaction quantities. The values of mass attenuation coefficient (μρ) was calculated with XCOM and they were in the range of 0.0552 cm2/g–0.4162 cm2/g for CCMRO1, 0.0553 cm2/g–0.4165 cm2/g CCMRO2, 0.0552 cm2/g–0.4148 cm2/g for CCMRO3, and 0.0555 cm2/g–0.4163 cm2/g for CCMRO4. The values of effective atomic number and electron density was within the range 21.38–43.38 and 2.84 x 1023 electrons/g −5.62 x1023 electrons/g, respectively. The trend of the mass energy absorption coefficients of the perovskites was also found to be in the same order as the mass attenuation coefficient. CCMRO3 has the highest photon energy absorptive ability among the perovskites while CCMRO2 has the least capacity. Also, the gamma dose rates in15 mm thick of CCMRO1, CCMRO2, CCMRO3, and CCMRO4 for 1.25 MeV are about 1446 kR/h, 1449 kR/h, 1453 kR/h, and 1446 kR/h, respectively. Comparatively, the values of the exposure and energy absorption buildup factors were almost the same for the perovskites at the same energy and optical depth. The investigated perovskites had higher mass attenuation coefficients that standard shielding glasses. The perovskites can be used for shielding or any other radiation absorption roles in radiation science and technology, especially for photons at low energies.

Preliminary study of a compact epithermal neutron absolute flux intensity measurement system for real-time in-vivo dose monitoring in boron neutron capture therapy

Boron neutron capture therapy (BNCT) is a radiotherapy technology that selectively kills tumor cells via the 10B(n, α)7Li reactions. Epithermal neutrons (0.5 eV–10 keV) are emitted and converted into thermal neutrons, which have a larger neutron capture reaction cross-section, by slowing down in the human body before reaching the tumor. Recently, the development of an epithermal neutron absolute flux intensity measurement technique has become crucial for real-time in-vivo dose monitoring in BNCT. In this study, a concept for a measurement system consisting of multiple compact scintillator with optical fibers detectors covered with neutron absorbers of various thicknesses is proposed. The designed system achieves a consistent response to epithermal neutrons with a theoretical coefficient of variation not higher than 5% for both LiCAF and EJ-254 scintillators. The theoretical feasibility of the proposed measurement system was investigated by an irradiation experiment carried out at the heavy water neutron irradiation facility at the Kyoto University Reactor. The experimental results indicated that further improvement and refinement are necessary to meet the high accuracy and precision required for real-time dose monitoring in clinical applications.

Monitoring of crack-induced electromagnetic vector field based on tunnel magnetoresistance effect

Electromagnetic radiation technology is widely used as a non-destructive, non-contact monitoring method, but the spatial information contained in it is ignored. A three-axis electromagnetic sensor was developed to monitor the electromagnetic radiation generated by the fracture of brittle rocks based on the tunnel magnetoresistance effect. The sensor has significant independence, anti-interference in three orthogonal directions, and exhibits high linearity. The monitored signals can be regarded as the components of the electromagnetic field vector in three directions. Based on the idea of vector synthesis, the peak index and peak matching index of the synthesized signal are extracted for the directional characterization and can be used to identify the direction of cracks.

Effect of ultrasonic radiation on the organization and mechanical properties of laser-melted Ni-based WC coatings

In this paper, laser cladding technology and ultrasonic radiation technology are combined to eliminate defects such as cracks and porosity in the coating. Firstly, the influence of the ultrasonic amplitude parameter on the macroscopic morphology and microstructure of the coating was investigated, and the dissolution law of WC was analyzed. It was found that under ultrasonic radiation with an amplitude of 14 μm, the surface of the coating was smoother and the average grain size was 16.52 μm2, which was reduced by 66.47 % compared to that of the coating without applied ultrasonic. Secondly, the effect of the ultrasonic radiation process on the mechanical properties of the coating was analyzed by comparative experiments. The results showed that when the amplitude of ultrasound was 14 μm, the number of cracks in the coating was effectively reduced, the amount of wear was reduced by 96.49 %, and the average microhardness value was 510.92 HV0.025, which was a relative increase of 28.10 %. Finally, the longitudinal residual stress of the coating was measured and the residual stress at the bottom of the coating was reduced by 95.31 % at an amplitude of 14 μm.

Cutting-edge technologies in external radiation therapy

Cutting-edge technologies in external radiation therapy

Access to diagnostic imaging and radiotherapy technologies for patients with cancer in the Baltic countries, eastern Europe, central Asia, and the Caucasus: a comprehensive analysis

Only 10-40% of patients with cancer in low-income and middle-income countries were able to access curative or palliative radiotherapy in 2015. We aimed to assess the current status of diagnostic imaging and radiotherapy services in the Baltic countries, eastern Europe, central Asia, and the Caucasus by collecting and analysing local data. This Access to Radiotherapy (ART) comprehensive analysis used data from 12 countries: the three Baltic countries (Estonia, Latvia, and Lithuania), two countries in eastern Europe (Moldova and Ukraine), four countries in central Asia (Kazakhstan, Kyrgyzstan, Tajikistan, and Uzbekistan), and three countries in the Caucasus (Armenia, Azerbaijan, and Georgia), referred to here as the ART countries. We were not able to obtain engagement from Turkmenistan. The primary outcome was to update the extent of shortfalls in the availability of diagnostic imaging and radiotherapy technologies and radiotherapy human resources for patients with cancer in former Soviet Union countries. Following the methods of previous similar studies, we developed three questionnaires-targeted towards radiation oncologists, regulatory authorities, and researchers-requesting detailed information on the availability of these resources. Authors from participating countries sent two copies of the appropriate questionnaire to each of 107 identified institutions and coordinated data collection at the national level. Questionnaires were distributed in English and Russian and responses in both languages were accepted. Two virtual meetings held on May 30 and June 1, 2022, were followed by an in-person workshop held in Almaty, Kazakhstan, in September, 2022, attended by representatives from all participating countries, to discuss and further validate the data submitted up to this point. The data were collected on a dedicated web page, developed by the International Cancer Expert Corps, and were then extracted and analysed. Data were collected between May 10 and Nov 30, 2022. 81 (76%) of the 107 institutions contacted, representing all 12 ART countries, submitted 167 completed questionnaires. The Baltic countries, which are defined as high-income countries, had more diagnostic imaging equipment and radiotherapy human resources (eg, Latvia [1·74] and Lithuania [1·47] have a much higher number of radiation oncologists per 100 000 population than the other ART countries, all of which had <1 radiation oncologist per 100 000 population) and greater radiotherapy technological capacities (higher numbers of linear accelerators and, similar to Georgia, high total external beam radiotherapy capacity) than the other ART countries, as well as high cancer detection rates (Latvia 311 cases per 100 000 population, Lithuania 292, and Estonia 288 vs, for example, 178 in Armenia, 144 in Ukraine, and 72 in Kazakhstan) and low cancer mortality-to-cancer incidence ratios (Estonia 0·43, Latvia 0·49, and Lithuania 0·48; lower than all but Kazakhstan [0·41]). The highest cancer mortality-to-cancer incidence ratios were reported by Moldova (0·71) and Georgia (0·74). Our findings show that the number of cancer cases, availability of diagnostic imaging equipment, radiation oncologists and radiotherapy capacity, and cancer mortality-to-cancer incidence ratios all vary substantially across the countries studied, with the three high-income, well resourced Baltic countries performing better in all metrics than the included countries in eastern Europe, central Asia, and the Caucasus. These data highlight the challenges faced by many countries in this study, and might help to justify increased investment of financial, human, and technological resources, with the aim to improve cancer treatment outcomes. US Department of Energy's National Nuclear Security Administration's Office of Radiological Security.

Combined performance of upper-room UVGI and ceiling-mounted air cleaners for removing active bioaerosol

Upper-room ultraviolet germicidal irradiation (UR-UVGI) and ceiling-mounted air cleaner (CM-AC) technologies contribute to curbing the spread of infectious diseases such as COVID-19. However, there is a lack of detailed studies on the performance differences between these two control technologies for reducing viral concentrations and infection risk in isolation ward environments with different ventilation modes, especially when used alone versus in combination. Therefore, this study performed numerical simulations under three ventilation modes, namely, downward ventilation (DWV), stratum ventilation (SV), and displacement ventilation (DV), by the Eulerian-Lagrangian method combined with the UV inactivation model. The viral disinfection performance of UR-UVGI and CM-AC was parametrically analyzed. The effectiveness of the combined application of these two control technologies in wards was evaluated. The results showed that expanding the irradiation range was more effective in enhancing the UR-UVGI performance with the same total UV flux. When using UR-UVGI only, DWV disinfected better at the same irradiation flux. In CM-AC cases, the viral aerosol removal efficiency was the greatest in DV. UR-UVGI and CM-AC had advantages in active bioaerosol removal in overall and localized indoor spaces, respectively. The combined application was recommended to maximize the air cleanliness. Under the role of UR-UVGI, a high level of disinfection could be achieved using CM-AC with low ventilation rates. When the CM-AC ventilation rate was 150 m3/h and the UV irradiance was 30 μW/cm2, the viral disinfection of DV exceeded 90%, while that of DWV was also close to 90%. The findings could provide insights to further lower the transmission risk of infectious diseases.

IMRT palliative multi isocentre treatment on a Varian Halcyon with Align RT Inbore Surface Guided Radiotherapy technology.

IMRT palliative multi isocentre treatment on a Varian Halcyon with Align RT Inbore Surface Guided Radiotherapy technology.

Advanced Radiation Therapy Options for Primary and Metastatic Spine Tumors

Primary spinal cord and metastatic spine tumors represent a heterogenous group of malignancies whose management is complex given the variety of tumor histologies, tumor-related morbidity, and potential complications of treatment. The critical role of radiation therapy in the management of primary spinal cord and metastatic spine tumors has been influenced by advances in neurosurgical techniques, neuroimaging, integrative diagnoses, and most impactfully through advances in radiotherapy technology specifically stereotactic radiotherapy and proton therapy. This article reviews contemporary literature supporting the use of advanced radiotherapy in the management of primary spinal cord and metastatic spine tumors.

Significance of radiation therapy in frontal glioblastoma patients and exploration of optimal treatment modality: a real-world multiple-center study based on propensity score matching.

Glioblastoma (GBM) exhibits diffuse and invasive growth patterns, with a 5-year overall survival (OS) rate of 5-10%. In addition, approximately 40 percent of GBMs are localized in the frontal lobe, a region closely linked to essential life functions including cognition, so that it cannot be completely eradicated through surgical intervention, leading to very poor prognosis. Postoperative therapy is an essential treatment modality. The aim of this study is to explain the possible role of radiation therapy (RT) in the treatment of frontal GBM, providing more evidence for clinical application. In the study, patient information pertaining to frontal GBM patients was collected from the Surveillance, Epidemiology, and End Results (SEER) database for the period 2000 to 2018 with 9,904 patients deemed appropriate for inclusion in this study. A 1:2 propensity score matching analysis was conducted to balance the non-radiotherapy and radiotherapy group. This study is a retrospective study. Before matching, the median OS, tumor specific survival (TSS) and hazard ratio (HR) were 3 months, 3 months and 4.408 [95% confidence interval (CI): 3.762-4.535, P<0.001] in the non-RT group compared to those of 13 months, 14 months and 2.463 (95% CI: 2.247-2.936, P<0.001) in the RT group. After matching, the median OS, TSS and HR were 3 months, 4 months and 1.433 (95% CI: 1.387-1.692, P<0.001) in the non-RT group compared to those of 8 months, 8 months and 1.427 (95% CI: 1.374-1.682, P<0.001) in the RT group. Radiotherapy is an important local therapy, which can significantly improve the tumor-specific survival and OS of frontal GBM patients. With the arrival of the era of precision radiotherapy, the continuous progress of radiotherapy technology may bring more benefits to frontal GBM patients.

Engineering implementation of permanent magnet uniform spreading system for 3 MeV electron beam accelerator

Electron radiation technology, a significant application of non-power civil nuclear technology, opens up various research opportunities for electron beam accelerators as radiation sources. This paper introduces the engineering implementation of a permanent magnet uniform spreading system for the 3 MeV electron beam accelerator. The system is designed to improve radiation homogeneity, which is a crucial performance parameter in the radiation processing. The paper firstly investigates the collimation of magnets and beam spot in electron beam accelerators and proposes a novel collimation method. In addition, we also address various engineering implementation challenges encountered during the practical application of the uniform spreading system's permanent magnet devices. As a prerequisite for the application of uniform spreading system, a long-term stability experiment is conducted on the permanent magnets in radiation environments. The engineering feasibility of the uniform spreading system is ultimately verified by assessing the radiation homogeneity at the target using radiation dose tablets.