Technology Demonstration Research Articles

3Cat-8 Mission: A 6-Unit CubeSat for Ionospheric Multisensing and Technology Demonstration Test-Bed

This paper presents the mission analysis of 3Cat-8, a 6-Unit CubeSat mission being developed by the UPC NanoSat Lab for ionospheric research. The primary objective of the mission is to monitor the ionospheric scintillation of the aurora, and to perform several technological demonstrations. The satellite incorporates several novel systems, including a deployable Fresnel Zone Plate Antenna (FZPA), an integrated PocketQube deployer, a dual-receiver GNSS board for radio occultation and reflectometry experiments, and a polarimetric multi-spectral imager for auroral emission observations. The mission design, the suite of payloads, and the concept of operations are described in detail. This paper discusses the current development status of 3Cat-8, with several subsystems already developed and others in the final design phase. It is expected that the data gathered by 3Cat-8 will contribute to a better understanding of ionospheric effects on radio wave propagation and demonstrate the feasibility of compact remote sensors in a CubeSat platform.

Meta-Analysis on Farmers’ Adoption of Agricultural Technologies in East Africa: Evidence from Chinese Agricultural Technology Demonstration Centers

Farmers’ low agricultural productivity in East African countries is attributed to among other factors, the low application of modern agricultural technologies. Using meta-analysis this study intended to examine the determinants of adoption of agricultural technologies in East African countries recipients of Chinese Agricultural Technology Demonstration Centers (ATDCs). A comprehensive review employed to gather 22 studies addressing the determinants of adoption of agricultural technologies such as improved varieties, agricultural mechanization, soil conservation, and animal breeding from Ethiopia, Tanzania, Uganda, and Rwanda. The collected data were analyzed using STATA 17 software. The study used a random-effect model to estimate the determinants of agricultural technologies adoption. The findings demonstrated that access to credit, age, education, farming experience, farmer group membership, household size, and off-farm income have a significant influence on farmers ‘adoption of improved varieties. Age, farm size, and education have a significant influence on the adoption of agricultural mechanization. Soil conservation practices are influenced by age, household size, and sex. Moreover, age, education, extension services, and farming experience have a significant impact on the adoption of animal breeding. It is recommended that East African governments, policymakers, and agricultural practitioners to focus on these common variables when planning for the intervention of new agricultural technologies.

Design and initial test results of a space-bound flux pump to energize the Hēki mission’s superconducting magnet

Despite repeated proposals to utilize superconducting magnets in space since at least the 1970s, examples of their use remain scant. One of the technical challenges is to maintain suitable cryogenic temperatures on a spacecraft. This challenge can be alleviated by the use of flux pumps to reduce the required cryogenic cooling power needed to energize the superconducting magnet. This paper describes the design and initial test results of the flux pump to fulfill the requirements of the Hēki mission that will operate a high-temperature superconducting magnet on an external platform of the International Space Station. A transformer-based, self-rectifier architecture was chosen for the flux pump. An effective circuit model used to design its electromagnetic properties and finite-element modelling used in its mechanical and thermal design. Liquid nitrogen tests were used to demonstrate that the electrical performance of the flux pump meets requirements. Higher-fidelity tests using flight-like copies of the hardware and software were undertaken and validated the thermal modelling. These tests also featured the continuous operation of the flux pump in a conduction-cooled setting for over 100 hours, reflecting an inherent reliability of this technology. Whilst further testing and flight qualification remains to be completed, we anticipate an on-orbit demonstration of this flux pump technology in February 2025. Such a demonstration will signal a maturing of this emerging superconducting technology for both in-space and terrestrial applications.

Thermal Characterization Methodologies for Experimental Minichannel Heat Sink Designs in Printed Circuit Board Assemblies

There has been a growing demand for novel, highly efficient, power-saving cooling solutions in recent years. In many cases, standard cooling techniques offer only limited opportunities to prevent the overheating of circuits. Such issues concern high-speed Printed Circuit Board Assemblies (PCBA) in data centers and telecommunication racks, where the flow of the cooling medium is obstructed due to the lack of space. Size limitations can also be a serious problem when cooling high-power devices because the devices consume a large space. Since the heat sink-based cooling solutions and the sophisticated IC packages only deal with one possible heat flow path, we were given the idea of enhancing the secondary heat flow path towards the Printed Circuit Board (PCB). Led by this intention, the idea of creating an embedded minichannel system inside the circuit board and circulating the cooling agent was realized. Through this method, we could decrease the board-to-ambient thermal resistance significantly. This paper presents the demonstration and feasibility study of this method. One of the main aims of this study is to demonstrate the applicability of the proposed concept in PCBAs, where the primary concerns are the low-cost manufacturability and available space. The other goal is to create an adaptation of the standard thermal characterization methodologies to deal with the specific dissipating components in the PCBA demonstrators. In the first part, the manufacturing technology is elaborated on, and its efficiency is characterized by thermal transient testing and Computational Fluid Dynamics (CFD) simulations. For these use cases, it was noted that the cumulative thermal resistance decreased by approximately 60% when a volumetric flow rate of 100 ccm was applied in the minichannels. In the second part, a more sophisticated technology demonstration is realized and characterized by adding the proposed embedded minichannel heat sink to an existing high-speed PCBA. A specific thermal transient testing was implemented specifically for this use case, and it was carried out on programmable logic devices by utilizing general-purpose programmable logic to construct the necessary measurement methods. In the future, this feature can be used in different logic circuit designs where it is not possible to determine the junction temperature directly.

Spaceborne COTS-Capsule hodoscope: Detecting and characterizing particle radiation

The COTS-Capsule Spaceborne hodoscope was launched into low Earth orbit aboard the International Space Station and operated from 2021 to 2022. The primary objectives of the payload are measuring and characterizing the radiation environment within the space station, serving as a technology demonstrator for the COTS-Capsule radiation mitigation apparatus, and testing the interaction of high-energy cosmic particles on-orbit with our detectors. The payload features a particle hodoscope equipped with an array of novel detectors based on polyvinyl toluene scintillators and silicon photomultiplier sensors that are used for radiation detection and characterization employing 2D intensity-based triangulation. This paper provides a comprehensive account of the COTS-Capsule payload’s construction, preflight performance, testing, qualification, and on-orbit calibration. The hodoscope, sensitive to ionizing cosmic particles, facilitates impinging particle track reconstruction by multi-detector 2D position estimation, energy deposition estimation, and linear energy transfer estimation.

Research on Precise Attitude Measurement Technology for Satellite Extension Booms Based on the Star Tracker

This paper reports the successful application of a self-developed, miniaturized, low-power nano-star tracker for precise attitude measurement of a 5-m-long satellite extension boom. Such extension booms are widely used in space science missions to extend and support payloads like magnetometers. The nano-star tracker, based on a CMOS image sensor, weighs 150 g (including the baffle), has a total power consumption of approximately 0.85 W, and achieves a pointing accuracy of about 5 arcseconds. It is paired with a low-cost, commercial lens and utilizes automated calibration techniques for measurement correction of the collected data. This system has been successfully applied to the precise attitude measurement of the 5-m magnetometer boom on the Chinese Advanced Space Technology Demonstration Satellite (SATech-01). Analysis of the in-orbit measurement data shows that within shadowed regions, the extension boom remains stable relative to the satellite, with a standard deviation of 30′′ (1σ). The average Euler angles for the “X-Y-Z” rotation sequence from the extension boom to the satellite are [−89.49°, 0.08°, 90.11°]. In the transition zone from shadow to sunlight, influenced by vibrations and thermal factors during satellite attitude adjustments, the maximum angular fluctuation of the extension boom relative to the satellite is approximately ±2°. These data and the accuracy of the measurements can effectively correct magnetic field vector measurements.

Contestation in social acceptance of direct air capture (DAC) technologies in Korea by differing framings over governance principles

Recently, DAC technologies have been recognized as a viable innovation in Korea’s mitigation efforts. In 2023, while formulating a specific implementation plan to meet the national mitigation target in Korea’s 2030 nationally determined contribution (NDC), the government considered setting a separate mitigation target for DAC technologies alongside the existing target for carbon capture, storage, and utilization (CCUS) technologies. During government-wide meetings, a clear divide emerged between supporters and opponents. Despite strong demand from supporters, the final national implementation plan did not include a mitigation target for DAC technologies. Focusing on this contestation, this paper explores why setting a separate target for DAC technologies was contested and not accepted at the policy-drafting stage. From the theoretical ground of social acceptance of new and innovative technologies, this paper utilizes four governance principles as social norms with which stakeholders understand and interpret DAC technologies, and analyzes differing framings on DAC technologies. Research results show that dominant framing approaches, hindering the establishment of a DAC technology-specific mitigation target, are i) risks of considering short-term and binding targets in commensurate with long-term targets through DAC technologies, ii) the uncertainty of mitigation potentials by technologically and methodologically under-developed DAC technologies, and iii) the inefficiency of financial investment for DAC technologies. This paper concludes with policy recommendations, emphasizing the need to establish binding short- and mid-term targets in alignment with the 2050 long-term target, government support for technology demonstrations, methodological assistance for leveraging carbon markets, and a redefinition of the relationship between CCUS and DAC technologies.

Sustainable integration of insects into European food chains

Abstract The European Commission’s Circular Economy Action Plan (CEAP) is a cornerstone of the European Green Deal, aiming for transition towards a more sustainable and circular economy by addressing waste reduction and promoting recycling of low-opportunity cost biomass. The EU Horizon 2020 project SUStainable INsect CHAIN (SUSINCHAIN) aligns with these goals, focusing on the efficient utilisation of insects in the food chain to strengthen sustainable supply chains, enhance consumer acceptance, and create market opportunities. The project, targeted at Technology Readiness Level 6, addresses barriers through comprehensive research, technology demonstrations, and stakeholder collaboration. Results contribute to scaling up the insect sector by overcoming supply and demand challenges, fostering trust, and developing best practices. The opinions generated encompass market opportunities, insect rearing, processing, safety, and sustainability, providing guidelines for stakeholders, public authorities, policymakers, and academia to collectively drive the growth and acceptance of the European insect sector.

Improved Mung Bean (Vigna radiate L.) Technology Demonstration and Promotion Under North-West Ethiopia

North-West Ethiopia, particularly metekel area, was conducive for the production of lowland pulses including mung beans. However, because of some known and unknown factors the productivity of mung beans was not that much improved regardless of the study area’s potential. Due to this, a two season field experiment was conducted to demonstrate and promote improved mung bean varieties under pawe district for 2021 and 2022 consecutive cropping seasons. During 2021 and 2022 main seasons, demonstration and promotion of improved mung bean varieties with the direct involvement of stakeholders (farmers, agricultural experts, government officials, researchers) field day event was carried out. The improved mung bean varieties demonstrated and promoted were NVL-1, N-26 (Rasa), Shoarobit (as a check) and MH-97-6 (Borda). Small scale farmers and agricultural experts even district government officials were purposely selected from the nearby district (pawe) followed that theoretical trainings about the production of mung bean, were given during the event. Each event participants have set their own variety selection parameters; with this majority of the participants selected and promoted N-26 (Rasa), NVL-1 mung bean varieties based on high grain yield, more number of pods per plant, larger grain size, uniformity and earliness, the rest of the participants preferred Shoarobit (as a check) based on high biomass and grain yield whereas MH-97-6 (Borda) was selected and promoted based on medium duration and high yield. The author suggested that, those selected and promoted mung bean varieties (mainly N-26 (Rasa), NVL-1 and MH-97-6 (Borda) have been recommended for production under the study area and similar agro-ecologies to satisfy the seed demand raised by small scale farmers and other agents.

Damping optimization of a fully viscoelastic structure with enforced mass reduction

Current damping methods employed in industry, such as Constrained Layer Damping (CLD), all require the introduction of additional mass and a secondary material to the structure. In transportation industries, this weight addition is often correlated with an increase in operational costs. Additionally, in applications with large temperature changes, such as in space, the secondary material introduces an additional source of stress during thermal expansion and contraction. This work presents a methodology to significantly improve the damping performance of a fully viscoelastic, single material structure while also enforcing a mass reduction. The work expands upon the modal strain energy (MSE) method to calculate the damping performance of a fully viscoelastic structure and develops a novel weighting scheme to make the optimization more robust. The methodology is then implemented on a technology demonstration thermoplastic lunar rover. This implementation demonstrates the ability to optimize a fully viscoelastic structure to significantly improve the damping performance while also achieving a large decrease in mass. The implementation also demonstrates the robustness of the weighting scheme as it allows the natural frequencies to shift between iterations. The skin thickness of the rover’s base panel was optimized. After optimization, the base panel of the rover achieved a 20% damping improvement for Mode 1 with a 9% mass reduction. The skin thickness of the full rover was optimized and achieved a 15% damping improvement for Mode 2 with an 11% mass reduction.

Current status and research prospects of terrestrial ecosystem carbon sink in Northeast China.

Increasing the carbon sink capacity of terrestrial ecosystems is a primary strategy to mitigate climate change and achieve the "carbon neutrality" goal. Clarifying the status and future dynamics of carbon sink of terrestrial ecosystems in Northeast China is crucial for achieving "carbon neutrality" as this region is a core contributor to carbon sink in China's terrestrial ecosystems. Here, we systematically summarized current research on carbon sink of terrestrial ecosystems across Northeast China, including the measurements and spatial-temporal patterns of carbon sinks, driving mechanisms of carbon sinks, the assessments of carbon sink potential, and technologies for increasing carbon sequestration. There are substantial uncertainties in quantifying terrestrial ecosystem carbon sink in Northeast China due to differences in data sources and methods, especially for forest carbon sink measurements, ranging from 0.020 to 0.157 Pg C·a-1. Carbon sink function depends on carbon exchange processes across plant-soil-atmosphere interfaces. The key pathways to enhance carbon sequestration in Northeast China under different temporal and spatial scales remains unclear. Improving terrestrial ecosystem quality is the key and core of carbon sequestration and sink enhancement. However, there is an urgent need to develop a multi-ecosystem collaborative carbon sequestration and sink enhancement technology system for the "dual carbon" goal. Future research needs to develop an accurate carbon sink measurement system that integrates multi-source data and multi-scale technologies to accurately assess the function and potential of carbon sink in Northeast China, focus on the multi-scale driving mechanism of carbon sink functions, develop new technical systems for coordinated enhancement of carbon sink for the Northeast terrestrial ecosystems, and carry out demonstrations of carbon sink enhancement technologies. These efforts will provide the scientific and technological supports for achieving the "carbon neutrality" goal.

Public control of coal resources of the United States’ Powder River Basin for a managed decarbonization transition

Abstract The United States (US) has set aggressive targets for reaching a carbon pollution-free power sector by 2035 and a net-zero economy by 2050. Reaching these goals will require both rapid expansion of zero- and negative-carbon infrastructure and a phase-out of unabated fossil fuel infrastructure. New subsidy and regulatory actions focus on eliminating coal emissions at the point of consumption either through carbon capture and storage (CCS) or coal-fired power plant retirement. Yet, these pathways have opposite implications for coal production: CCS is coal intensive, while coal retirement is not. Despite a record of chaotic and harmful transition and significant social scientific research suggesting better outcomes from managed, coordinated decline, these mechanisms rely on uncoordinated private decision making by mine and plant owners. Coal mining has rapidly declined since peak production in 2008. Production has dropped by half; bankruptcies are the norm; and coal mine and power plant host communities have experienced highly disruptive decline as a result of this unmanaged transition. Given this history, we argue the current market-based, plant-driven governance approach could worsen transition challenges, including potentially stranding costly CCS investments. We argue that the US should complement its extensive investments in technology demonstrations with innovative governance demonstrations to facilitate a just energy transition. Specifically, we argue that the Powder River Basin, which is the US’ largest coal basin and consists primarily of federally leased coal, should be brought under public control for managed decline both to meet emissions reduction targets and advance a just energy transition.

Experiment Modelling of Automated Verification Control on Environmental Conditions During Crop Storage

The study introduces a preliminary approach to enhance the supervision of food processing operators. Specifically, it showcases a digital model of an online compliance validation system with environmental conditions designed for food processing and preservation items that are sensitive to climate factors. The technology demonstration involves four fundamental stages carried out in a complete experimental cycle, where intelligent sensors gather and transmit data through a low-power wireless wide-area network from a farm specializing in sunflower seed storage. Subsequently, six consecutive scripts are executed, five of which are coded in Python. The integration of distributed data technology brings objectivity to the process of securely storing environmental parameters and objectively verifying their compliance with recommended hygienic, bio certification standards. As a result, monitoring the food production process becomes more publicly accessible and with higher rates of objectivity in decisions, enabling prospective buyers and certification agencies to assess the quality of food products with great precision. Therefore, the suggested digital model has the potential to ensure the utmost transparency in the food processing sector.

Pre-extension Demonstration and Evaluation of Top Feeder Honeybee Feeding Technology at Wolmera Woreda, Oromia Region

To maintain optimum honeybee colony population during dearth of floral resources, feeding of honeybee colonies with supplementary feeds is important. This research activity is conducted with the main objectives to evaluate and demonstrate top feeder technology under farmers’ management and create awareness on the importance of the technology. As to the method, selection of demonstration sites and farmers was purposive due to the reason that the evaluation of the technology requires modern box hive and experience on this hive. Two demonstration sites at two Village Administrations selected and Farmers research groups were used for technology evaluation. One FRG which contain 10-15 beekeepers strengthened at each demonstration site and group apiaries of FRG members used as centers of learning and technology evaluation. At each sites, farmers, development agents and experts trained and experimental colonies established. Honeybee colony follow up and technology evaluation activities undertaken in partnership with these FRG members, development agents and experts. As to the result, by using top feeder, the beekeeper can feed many colonies in short period of time. The average time taken to feed one honeybee colony using top feeder was only 55.85 seconds where as it was 107.26 seconds using plastic bucket under farmer’s management. Moreover, feeding using top feeder also reduced honeybee colonies disturbance during time of feeding. In conclusion, technologies like top feeder that saves beekeepers time and also reduce disturbances of honeybee colony are critical for our beekeepers. Therefore, it is suggested to further pre scale up the technology in other areas

Keberhasilan Pelatihan Budidaya Cabai Secara Hidroponik Dutch Bucket Kepada Kelompok Wanita Tani Mekar Sari

Mekar Sari Women Farmers Group (KWT) Sidomulyo Village, Anggana Subdistrict, Kutai Kartanegara Regency is a group of mothers who work in agriculture, by utilizing the yard land that is not too large, hydroponic chili cultivation is considered to provide a place for KWT mothers to carry out their activities. Through community service activities, by providing training in hydroponic chili cultivation using dutch buckets. The purpose of this training is to determine the success of hydroponic chili cultivation training, especially dutch buckets for Women Farmers Group mothers in Sidomulyo Village. The training includes Technology Demonstration, Focus Group Discussion and making dutch bucket hydroponics and hydroponic chili cultivation. Training participants filled out a questionnaire to determine the level of Effectiveness of Knowledge Change (EPP). Based on the results of the EPP analysis with a value of 69.83%, it is categorized as very effective. So that this activity is considered successful.

Maturing the design: challenges in maturing a first of a kind fusion power plant.

The design, delivery and operation of a large-scale infrastructure project are challenging at best. For the Spherical Tokamak for Energy Production (STEP) prototype powerplant (SPP), the challenges increased dramatically. In addition to being a large-scale infrastructure project, it is a cutting edge, first of a kind (FOAK) technology demonstrator. The design teams are working in a volatile, uncertain, complex and ambiguous environment, where technology is constantly emerging, maturing and changing. STEP will be unlike any power plant ever built and requires the development of new technologies and capabilities, but also a novel approach to planning and maturing the design. By taking a holistic view of the engineering life cycle from the start, the programme will be better positioned to achieve an SPP that is fit for purpose and can be used to show a path to ultimate commercial viability for subsequent power plants. This paper will review the key challenges in maturing a FOAK fusion power plant and look in depth at how the STEP team are maturing the required capabilities and planning to ensure successful delivery of the SPP. This article is part of the theme issue 'Delivering Fusion Energy - The Spherical Tokamak for Energy Production (STEP)'.

Towards robotic on-orbit assembly of large space telescopes: Mission architectures, concepts, and analyses

Imaging systems larger than the James Webb Space Telescope will enable unprecedented astronomy in the future. Larger aperture space-based imagers will also support next-generation Earth Observation missions for national security and disaster monitoring. However, launching and operating such large telescopes in the poses several practical challenges. A key challenge is that mirrors with apertures larger than 3 m cannot be monolithically manufactured so a segmented design is utilized to achieve primary mirror apertures. Even if larger mirrors could be made, it would be impossible to stow them in fairings of most existing and future launch vehicles. Folded-wing designs to deploy segmented primary mirrors, as done with the James Webb Space Telescope, are one approach to overcoming this volumetric challenge but inappropriate for 25 m apertures considered in this study. This paper presents the concept of operations and mission architectures/analysis for on-orbit assembly of a 25 m aperture telescope operating in the visible waveband of the electromagnetic spectrum capable of 1 m spatial resolution from geostationary orbit. Further, a technology demonstration roadmap towards maturing the robotic assembly technology stack is then presented as precursors to the 25 m imaging system.

Hochpräzise Funktionsflächen an CFK-Bauteilen

Abstract With increasing demands on the power density of electrical drive systems metal materials commonly used in mechanical engineering are reaching their performance limits. Further improvements can be achieved using carbon fiberreinforced polymers (CFRP). To enable their use in industrial practice, the SPOTLIGHT project focuses on the manufacturing and grinding of high-precision functional surfaces of CFRP components. The CFRP components are evaluated through drive technology demonstrators.

Transitioning metal-organic frameworks from the laboratory to market through applied research.

Metal-organic frameworks (MOFs) have captivated researchers for over 25 years, yet few have successfully transitioned to commercial markets. This Perspective elucidates the progress, challenges and opportunities in moving MOFs to market, focusing on applied research. The five applied research steps that enable technology development and demonstration are reviewed: synthesis, forming, processing (washing and activation), prototyping and compliance. Furthermore, the importance of a comprehensive techno-economic analysis incorporating a complete picture of costs and revenues is discussed. Readers can use the understanding of applied research presented herein to tackle their MOF commercialization challenges.

Correction to: Aero-structural Analysis of a Scramjet Technology Demonstrator Designed to Operate at an Altitude of 23 km at Mach 5.8

Correction to: Aero-structural Analysis of a Scramjet Technology Demonstrator Designed to Operate at an Altitude of 23 km at Mach 5.8