Spectroscopic Techniques Research Articles

Performance of zero-valent iron immobilized on activated carbon cloth for the removal of phenol from wastewater

BackgroundDischarge of large amounts of untreated industrial effluent into water bodies pose significant environmental challenges worldwide. This is due to the limitations of traditional wastewater treatment methods in the treatment of recalcitrant organic pollutants. Fenton processes involves the generation of hydroxyl radicals that are well suited to degrade organics in effluent water. This study focuses on reducing slag generation during Fenton processes and enhancing the reuse of nano-zero-valent iron (NZVI) through the immobilization of NZVI on activated carbon cloth (ACC) through a chitosan (CH) linker with phenol as a model pollutant.ResultsMicrostructural and spectroscopic techniques were employed to study the materials prepared and 37.5 wt% iron loading was achieved. Phenol degradation of 96.3% at 40 °C at pH of 3.0 with 50 mM H2O2 was achieved using ACC-CH-NZVI. Adsorption and degradation studies carried out using ACC-CH-NZVI catalyst revealed that phenol adsorption onto ACC-CH-NZVI fits the Langmuir isotherm model, following the pseudo-second-order kinetic model and first-order reaction kinetics. Thermodynamic studies indicate the non-spontaneous, endothermic and irreversible nature of the removal process. Comparing ACC-CH-NZVI with ACC and ACC-CH, phenol removal using ACC drops from 87.8 to 39%, while using ACC-CH, the removal efficiency drops from 73 to 20.9% and using ACC-CH-NZVI, phenol removal drops from 96.3 to about 70% and total organic carbon removal drops from 79 to about 60% with minimal iron leaching, highlighting the superior performance of ACC-CH-ZVI and the role of NZVI in enhancing phenol removal.ConclusionsThe catalyst demonstrated good stability for phenol degradation to about 70% phenol removal from simulated wastewater and 60% TOC removal from industrial wastewater after five treatment cycles with minimal Fe leaching.Graphical abstract

Luminescent Platinum(II) Complexes with Stimuli-Responsive Flexible Lewis Pair Ligands: Spectroscopic and Computational Studies.

A series of new luminescent bimetallic platinum(II) complexes with stimuli-responsive flexible Lewis pair (FlexLP) ligands are described. The FlexLP ligands consist of a dimesitylboron Lewis acid and diphenylphosphine oxide Lewis base which are in equilibrium between the unbound open form and the Lewis adduct, controlled by the hydrogen bond donating strength of the solvent. Spectroscopic techniques and density functional theory (DFT) calculations were used to interpret the photophysics of the platinum(II) complexes. All complexes exhibit tunable absorption in the region of 300-500 nm and green to orange photoluminescence, depending on the ratio of weak (THF) to strong (MeOH) hydrogen bond donating solvent employed. Spectroscopic and computational data shows that phosphine and peripheral acetylide ligands on the platinum(II) centers have limited influence on the emission energy, indicating the emission originates from the FlexLP-dominated fluorescence. Using time-resolved transient absorption spectroscopy it is shown that the complexes undergo intersystem crossing (ISC) to the triplet-excited state upon photoexcitation, and the ISC efficiency is affected by the peripheral acetylide ligands. The triplet-excited state lifetime can also be manipulated by the state of the FlexLP ligand, with the closed form complexes having longer lifetimes than the open form complexes.

Ultralow Detection of Mancozeb Using Two-Dimensional Cobalt Telluride (CoTe2).

Pesticides are crucial in modern agriculture because they reduce pests and boost yield, but they also represent major risks to human health and the environment; therefore, it is important to monitor their presence in food. Reliable and precise detection techniques are possible ways to address this issue. In this work, we utilize atomically thin (two-dimensional) cobalt telluride (CoTe2) with a high surface area and charge as a template material to detect mancozeb using spectroscopic and electrochemical techniques. When mancozeb (MNZ) molecules interact with 2D CoTe2, spectroscopic analyses reveal distinctive spectral shifts that clarify the underlying chemical interactions and binding mechanisms. Furthermore, CoTe2's electroactive sites and their manipulation for improved sensitivity and selectivity toward certain MNZ molecules are investigated by electrochemical studies. The CoTe2/GCE electrode exhibits enhanced electrochemical activity toward the electrooxidation of MNZ. The developed sensing electrode shows a linear range from 0.184 mM to 18.48 μM and a limit of detection of about 0.18 μM. In addition, we employ density functional theory (DFT) first-principles calculations to validate the experimental findings and comprehend the mechanism behind the interaction between CoTe2 and MNZ molecules. The study highlights the effectiveness of 2D CoTe2 as a dual-mode sensing platform for qualitative and quantitative assessment of MNZ pollutants, demonstrated by the integration of electrochemistry and spectroscopy and the critical role that 2D CoTe2-based sensors can play in accurate and efficient pesticide detection, which is required for agricultural safety protocols and environmental monitoring.

Selenium loaded sodium alginate/polyvinyl alcohol nanocomposite film as wound dressing: structural, optical, mechanical, antimicrobial properties and biocompatibility

In the current research, synthesized Se-NPs were loaded into sodium alginate/polyvinyl alcohol SA/PVA blend, 1:2 (w:w), with different proportions to form nanocomposite films by using the solution casting method. The main goal is to enhance the physical and antibacterial properties of the polymer blend; therefore, it can be utilized for wound dressing applications. The physical aspects of the prepared films were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), atomic force microscope (AFM), scanning electron microscope (SEM), Energy dispersive X-ray (EDX), UV–Vis spectroscopic technique, and mechanical analysis to show the effect of increasing the concentration of Se-NPs from zero to 0.5 wt% on their properties. Regarding the XRD analysis, the calculated values of lattice strain (ε\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\varepsilon$$\\end{document}) increased from 0.005 to 0.013. The FTIR absorption spectrum recorded an intensity reduction and position shift in the main characteristic peaks of SA/PVA. The morphology of Se-NPs revealed a spherical shape with a mean diameter of 131.76 nm, as revealed by transmission electron microscopy (TEM). The surface morphological images showed the appearance of a few cracks; besides, the average roughness increased from 1.59 to 2.08 nm. According to the UV–Vis spectroscopic analysis, the optical band gap reduces (from 5.425 to 5.216 eV) for the direct transition and from (5.07–4.78 eV) for the indirect transition, which is an indication of the interaction between Se-NPs and SA/PVA blend. Young’s modulus, tensile strength, and yield strength of the films increased with the addition of selenium nanoparticles. On the other hand, the amount of selenium release significantly increased with enhancing the concentration of Se-NPs in SA/PVA blend film from 0.1 to 0.5 wt%. Additionally, the inclusion of Se-NPs supplied the polymer blend with excellent antimicrobial activity, which would remove the possibility of microbial infection at the wound site. Moreover, the prepared SA/PVA/Se nanocomposite films have good biocompatibility with Human Skin Fibroblast (HSF). The results suggest the potential of this nanocomposite to be used in wound dressing applications.

Organo Chalcogenone-Triggered Luminescent Copper(I) Clusters for Light Emitting Applications.

A novel organo sulfur and selenium-controlled emission behavior in discrete copper(I) clusters has been demonstrated for the first time. The pentanuclear [Cu5Br5(L1)2] (1), trinuclear [Cu3Br3(L2)2] (2), dinuclear [Cu2I2(L1)2] (3), and tetranuclear [Cu4I4(L2)2CH3CN] (4) copper(I) discrete clusters have been synthesized from the reaction between L1 [L1 = 1-isopropyl-3-(pyridin-2-yl)-imidazol-2-thione] or L2 [L2 = 1-isopropyl-3-(pyridin-2-yl)-imidazol-2-selone] chelating ligands and corresponding copper(I) halide salts. These new clusters have been characterized by FT-IR, UV-visible, thermogravimetric analysis, and fluorescence spectroscopy techniques. Single-crystal X-ray diffraction studies reveal that 1-4 consists of abundant d10-d10 interactions. The structural and bonding features of clusters have been investigated using density functional theory calculations. Notably, the L2-ligated 2 and 4 are poorly emissive, while L1-ligated 1 and 3 showed strong emission in the orange and green regions, respectively. The time-dependent density functional theory natural transition orbital calculations of 1 and 3 reveal the nature of the transitions contributed by 3MLCT/3LLCT/3ILCT. Photoluminescence quantum yields of 1 and 3 are 19 and 11%, with average lifetimes of 21.55 and 6.57 μs, respectively. 1 and 3 were coated on prototype LED bulbs for light-emitting performance.

Synthesis of Carbon Dots via Microwave-Assisted Process: Specific Sensing of Fe(III) and Antibacterial Activity.

Carbon dots synthesized from a renewable and sustainable source of biomass have greater attention in the nanomaterial research field. In the present study, we adopted a facile and green synthesis of carbon dots from bio waste of pumpkin seeds using a one-pot microwave-assisted carbonization method. The synthesized carbon dots exhibit excellent photoluminescence properties with a bright blue emission peak at 399nm and fluorescence quantum yield was about 9.5%. The optical properties and structure of carbon dots were examined using various spectroscopy techniques and the synthesized carbon practical size was about 4.37nm and possessed good solubility in water. Carbon dots were used for the detection of Ferric ions in the water bodies and the interaction between Fe3+ ions and carbon dots was evaluated by fluorescence spectroscopy techniques. This method is a simple and selective detection of Fe3+ in the aqueous medium. Interestingly carbon dots also show good antibacterial activity at a very low concentration (1mg/L) for effective control of E. coli 93% and Pseudomonas aeruginosa (81%), within 12h.

Enhancing monolignol ferulate conjugate levels in poplar lignin via OsFMT1

BackgroundThe phenolic polymer lignin is one of the primary chemical constituents of the plant secondary cell wall. Due to the inherent plasticity of lignin biosynthesis, several phenolic monomers have been shown to be incorporated into the polymer, as long as the monomer can undergo radicalization so it can participate in coupling reactions. In this study, we significantly enhance the level of incorporation of monolignol ferulate conjugates into the lignin polymer to improve the digestibility of lignocellulosic biomass.ResultsOverexpression of a rice Feruloyl-CoA Monolignol Transferase (FMT), OsFMT1, in hybrid poplar (Populus alba x grandidentata) produced transgenic trees clearly displaying increased cell wall-bound ester-linked ferulate, p-hydroxybenzoate, and p-coumarate, all of which are in the lignin cell wall fraction, as shown by NMR and DFRC. We also demonstrate the use of a novel UV–Vis spectroscopic technique to rapidly screen plants for the presence of both ferulate and p-hydroxybenzoate esters. Lastly we show, via saccharification assays, that the OsFMT1 transgenic p oplars have significantly improved processing efficiency compared to wild-type and Angelica sinensis-FMT-expressing poplars.ConclusionsThe findings demonstrate that OsFMT1 has a broad substrate specificity and a higher catalytic efficiency compared to the previously published FMT from Angelica sinensis (AsFMT). Importantly, enhanced wood processability makes OsFMT1 a promising gene to optimize the composition of lignocellulosic biomass.

Au nanoparticles decorated graphitic carbon nitride nanosheets as a sensitive and selective fluorescence probe for Fe3+ and dichromate ions in aqueous medium

Graphitic carbon nitride mutated with metal nanoparticles has captivated great interest as an effective fluorescent sensor for the detection of harmful ions present in water. In the present work, bulk-gCN was synthesized using melamine as precursor, and further Au-gCN nanocomposite were fabricated via in-situ direct reduction deposition method. The structural, morphological, compositional, stability and optical properties of bulk gCN and Au-gCN nanocomposite were examined using various scattering and spectroscopic techniques such as HRTEM, XPS, XRD and SEM. The synthesized bulk gCN straggles during selectivity studies with different cations and anions because of its uneven surface morphology, however in Au-gCN gold nanoparticles are uniformly distributed on the gCN sheets which results in its enhanced selectivity over bulk gCN. This leads to the fabrication of an optical sensor for Fe3+ and Cr2 ions with limit of detection of 4.62 and 2.77 μM, respectively. The sensing of Fe3+ ions corresponds to the photoinduced electron transfer (PET) mechanism, while the detection of chromate species is associated with an inner filter effect (IFE). The practical applicability of the sensor was also evaluated for different environmental water samples. The high stability, sensitivity, and specificity of Au-gCN nanocomposite make it a potential fluorescent probe for Fe3+ and Cr2 ions in water samples.

Thermal Truncation of Heptamethine Cyanine Dyes.

Cyanine dyes are a class of organic, usually cationic molecules containing two nitrogen centers linked through conjugated polymethine chains. The synthesis and reactivity of cyanine derivatives have been extensively investigated for decades. Unlike the recently described phototruncation process, the thermal truncation (chain shortening) reaction is a phenomenon that has rarely been reported for these important fluorophores. Here, we present a systematic investigation of the truncation of heptamethine cyanines (Cy7) to pentamethine (Cy5) and trimethine (Cy3) cyanines via homogeneous, acid-base-catalyzed nucleophilic exchange reactions. We demonstrate how different substituents at the C3' and C4' positions of the chain and different heterocyclic end groups, the presence of bases, nucleophiles, and oxygen, solvent properties, and temperature affect the truncation process. The mechanism of chain shortening, studied by various analytical and spectroscopic techniques, was verified by extensive ab initio calculation, implying the necessity to model catalytic reactions by highly correlated wave function-based methods. In this study, we provide critical insight into the reactivity of cyanine polyene chains and elucidate the truncation mechanism and methods to mitigate side processes that can occur during the synthesis of cyanine derivatives. In addition, we offer alternative routes to the preparation of symmetrical and unsymmetrical meso-substituted Cy5 derivatives.

Verbena officinalis (VO) leaf extract as an anti-corrosion inhibitor for carbon steel in acidic environment

In the present work, Verbena Officinalis (VO) leaf extract was used as potential corrosion inhibitor for the corrosion of carbon steel (CS) in 0.5 M H2SO4 medium. Further, the corrosion inhibiting nature of VO leaf extract towards the CS was evaluated using mass loss (ML), potentiodynamic polarization (PDP), electrical impedance spectroscopy (EIS) and surface morphological analyses using atomic force microscope (AFM) and X-ray photoelectron spectroscopy (XPS) techniques. Calculation of activation energy Ea∗\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\left( {{\ ext{E}}_{{\ ext{a}}}^{*} } \\right)$$\\end{document} using Arrhenius equation shows the increase in activation energy when adding the VO leaf extract in 0.5 M H2SO4 medium and the maximum activation energy (Ea∗\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$${\ ext{E}}_{{\ ext{a}}}^{*}$$\\end{document} = 49.9 kJ mol−1) was observed for 1000 mg L−1 VO leaf extract in acid medium. The negative free energy values suggested the spontaneous and the stability of the adsorbed layer of VO leaf extract on the CS surface. Using EIS measurements, high percent inhibitory effectiveness of 91.1% for 1000 ppm solutions was achieved. With an increase in VO leaf extract dose, the double layer capacitance (Cdl) values fall while the values of charge transfer (Rct) increase. This showed that a protective layer of VO leaf extract on CS surface was formed. The polarization curves showed that the VO leaf extract acts as a mixed-type inhibitor. It is discovered that the adsorption of VO leaf extract molecules adhering to the CS surface followed the Langmuir isotherm. The anti-corrosion action of VO leaf extract is fully demonstrated by some surface techniques.

3-(Sulfamic acid)-propyltriethoxysilane on biochar nanoparticles as a practical, biocompatible, recyclable and chemoselective nanocatalyst in organic reactions.

Recyclable and inexpensive catalysts, waste regeneration, use of available and safe solvents are important principles of green chemistry. Therefore, in this project, biochar nanoparticles (BNPs) were synthesized by the pyrolysis method from chicken manure. Then, 3-(sulfamic acid)-propyltriethoxysilane (SAPES) was immobilized on the surface of BNPs (SAPES@BNPs). The prepared catalyst (SAPES@BNPs) was used as a commercial, practical, biocompatible and reusable catalyst in the selective oxidation of sulfides to sulfoxides. Further, the catalytic application of SAPES@BNPs was explored in the multicomponent synthesis of tetrahydrobenzo[b]pyrans under mild and green conditions. BNPs were characterized using SEM, TGA and XRD techniques. SAPES@BNPs were characterized using SEM, FT-IR spectroscopy, WDX, EDS, TGA, and XRD techniques. Particle size distribution was obtained by histogram graph. SAPES@BNPs can be recovered and reused several times. The purity of the products was studied using NMR spectroscopy.

Oxalate and adipate mediated fabrication of CuO nanocrystallites for their electrochemical and supercapacitance studies

Cupric oxide (CuO) has been comprehensively studied in the field of electrochemistry due to its high Tc-Superconducting property. The present work focus on two different CuO materials i.e. CuO-1 and CuO-2 nanocrystallites which are successfully synthesized from their oxalate and adipate precursors respectively. The calcination temperature for the synthesis of CuO from their precursors is ascertained by TGA analysis of the dicarboxylates. Both the CuO materials are thoroughly characterized by SEM–EDS, XRD, IR and XPS spectroscopic techniques. As a candidate for supercapacitor electrode material, CuO-1/C and CuO-2/C showed a specific capacitance of 4.15 F/g and 22.24 F/g using cyclic voltammetry, 10.4 F/g and 46.6 F/g using GCD curves respectively at a current density of 1 A/g. Also, the CuO-1/C and CuO-2/C showed a specific energy density (Es) 1.59 Wh kg−1 and 0.36 Wh kg−1 at a specific power density (Ps) of 0.02 kW kg−1 and 0.025 kW kg−1 respectively. Moreover, the CuO-2/C exhibits ≈ 96.1% coulombic efficiency following 1000 cycles, whereas, CuO-1/C lags in coulombic efficiency with only 51.8%. As a better candidate, CuO-2/C exhibited excellent rate capability with an outstanding cycling stability of 93.7% retention after 1,000 cycles. The factors contributing to the significant specific capacitance of CuO-2/C along with better stability and reproducibility are its low electrolyte resistance Rs (2.47Ω) and charge transfer resistance Rct (1.01 Ω).

Hot Electrons in a Steady State: Interband vs Intraband Excitation of Plasmonic Gold.

Understanding the dynamics of "hot", highly energetic electrons resulting from nonradiative plasmon decay is crucial for optimizing applications in photocatalysis and energy conversion. This study presents an analysis of electron kinetics within plasmonic metals, focusing on the steady-state behavior during continuous-wave (CW) illumination. Using an inelastic spectroscopy technique, we quantify the temperature and lifetimes of distinct carrier populations during excitation. A significant finding is the monotonic increase in hot electron lifetime with decreases in electronic temperature. We also observe a 1.22× increase in hot electron temperature during intraband excitation compared to interband excitation and a corresponding 2.34× increase in carrier lifetime. The shorter lifetimes during interband excitation are hypothesized to result from direct recombination of nonthermal holes and hot electrons, highlighting steady-state kinetics. Our results help bridge the knowledge gap between ultrafast and steady-state spectroscopies, offering critical insights for optimizing plasmonic applications.

Assessing Barrier Function in Psoriasis and Cornification Models of Artificial Skin Using Non-Invasive Impedance Spectroscopy.

Reconstructed epidermal equivalents (REEs) consist of two distinct cell layers - the stratum corneum (SC) and the keratinocyte layer (KL). The interplay of these layers is particularly crucial in pruritic inflammatory disorders, like psoriasis, where a defective SC barrier is associated with immune dysregulation. However, independent evaluation of the skin barrier function of the SC and KL in REEs is highly challenging because of the lack of quantitative methodologies that do not disrupt the counter layer. Here, a non-invasive impedance spectroscopy technique is introduced for dissecting the distinct contributions of the SC and KL to overall skin barrier function without disrupting the structure. These findings, inferred from the impedance spectra, highlight the individual barrier resistances and maturation levels of each layer. Using an equivalent circuit model, a correlation between impedance parameters and specific skin layers, offering insights beyond traditional impedance methods that address full-thickness skin only is established. This approach successfully detects subtle changes, such as increased paracellular permeability due to mild irritants and the characterization of an immature SC in psoriatic models. This research has significant implications, paving the way for detailed mechanistic investigations and fostering the development of therapies for skin irritation and inflammatory disorders.

Core Hole Effect to Valence Excitations: Tracking and Visualizing the Same Excitation in XPS Shake-Up Satellites and UV Absorption Spectra.

Introducing a core hole significantly alters the electronic structure of a molecule, and various X-ray spectroscopy techniques are available for probing the valence electronic structure in the presence of a core hole. In this study, we visually demonstrate the influence of a core hole on valence excitations by computing the ultraviolet absorption spectra and the shake-up satellites in X-ray photoelectron spectra for pyrrole, furan, and thiophene, as complemented by the natural transition orbital (NTO) analysis over transitions with and without a core hole. Employing equivalent core hole time-dependent density functional theory (ECH-TDDFT) and TDDFT methods, we achieved balanced accuracy in both spectra for reliable comparative analysis. We tracked the same involved valence transition in both spectra, offering a vivid illustration of the core hole effect via the change in corresponding particle NTOs introduced by a 1s core hole on a Cα, Cβ, or O atom. Our analysis deepens the understanding of the core hole effect on valence transitions, a phenomenon ubiquitously observed in general X-ray spectroscopic analyses.

Isolation and anti-neuroinflammation activity of sesquiterpenoids from Artemisia argyi: computational simulation and experimental verification

BackgroundArtemisia argyi is a traditional herbal medicine belonging to the genus Artemisia that plays an important role in suppressing inflammation. However, the chemical constituents and underlying mechanisms of its therapeutic potential in neuroinflammation are still incompletely understood, and warrant further investigation.MethodsSeveral column chromatography were employed to isolate and purify chemical constituents from Artemisia argyi, and modern spectroscopy techniques were used to elucidate their chemical structures. The screening of monomeric compounds with nitric oxide inhibition led to the identification of the most effective bioactive compound, which was subsequently confirmed for its anti-inflammatory capability through qRT‒PCR. Predictions of compound-target interactions were made using the PharmMapper webserver and the TargetNet database, and an integrative protein-protein interaction network was constructed by intersecting the predicted targets with neuroinflammation-related targets. Topological analysis was performed to identify core targets, and molecular docking and molecular dynamics simulations were utilized to validate the findings. The result of the molecular simulations was experimentally validated through drug affinity responsive target stability (DARTS) and Western blot experiments.ResultsSeventeen sesquiterpenoids, including fifteen known sesquiterpenoids and two newly discovered guaiane-type sesquiterpenoids (argyinolide S and argyinolide T) were isolated from Artemisia argyi. Bioactivity screening revealed that argyinolide S (AS) possessed the most potent anti-inflammatory activity. However, argyinolide T (AT) showed weak anti-inflammatory activity, so AS was the target compound for further study. AS may regulate neuroinflammation through its modulation of eleven core targets: protein kinase B 1 (AKT1), epidermal growth factor receptor (EGFR), proto-oncogene tyrosine-protein Kinase (FYN), Janus Kinase (JAK) 1, mitogen-activated protein (MAP) Kinase 1,8 and 14, matrix metalloproteinase 9 (MMP9), ras-related C3 botulinum toxin substrate 1 (RAC1), nuclear factor kappa-B p65 (RELA), and retinoid X receptor alpha (RXRA). Molecular dynamics simulations and DARTS experiments confirmed the stable binding of AS to JAK1, and Western blot experiments demonstrated the ability of AS to inhibit the phosphorylation of downstream Signal transducer and activator of transcription 3 (STAT3) mediated by JAK1.ConclusionsThe sesquiterpenoid compounds isolated from Artemisia argyi, exhibit significant inhibitory effects on inflammation in C57BL/6 murine microglia cells (BV-2). Among these compounds, AS, a newly discovered guaiane-type sesquiterpenoid in Artemisia argyi, has been demonstrated to effectively inhibit the occurrence of neuroinflammation by targeting JAK1.

Femtosecond to Microsecond Observation of Photochemical Pathways in Nitroaromatic Phototriggers Using Transient Absorption Spectroscopy.

The synthetic accessibility and tolerance to structural modification of phototriggered compounds (PTs) based on the ortho- nitrobenzene (ONB) protecting group have encouraged a myriad of applications including optimization of biological activity, and supramolecular polymerization. Here, a combination of ultrafast transient absorption spectroscopy techniques is used to study the multistep photochemistry of two nitroaromatic phototriggers based on the ONB chromophore, O-(4,5-dimethoxy-2-nitrobenzyl)-l-serine (DMNB-Ser) and O-[(2-nitrophenyl)methyl]-l-tyrosine hydrochloride (NB-Tyr), in DMSO solutions on femtosecond to microsecond time scales following the absorption of UV light. From a common nitro-S1 excited state, the PTs can either undergo excited state intramolecular hydrogen transfer (ESIHT) to an aci-S1 isomer within the singlet state manifold, leading to direct S1 → S0 internal conversion through a conical intersection, or competitive intersystem crossing (ISC) to access the triplet state manifold on time scales of (1.93 ± 0.03) ps and (13.9 ± 1.2) ps for DMNB-Ser and NB-Tyr, respectively. Deprotonation of aci-T1 species to yield triplet anions is proposed to occur in both PTs, with an illustrative time constant of (9.4 ± 0.7) ns for DMNB-Ser. More than 75% of the photoexcited molecules return to their electronic ground states within 8 μs, either by direct S1 → S0 relaxation or anion reprotonation. Hence, upper limits to the quantum yields of photoproduct formation are estimated to be in the range of 13-25%. Mixed DMSO/H2O solvents show the influence of the environment on the observed photochemistry, for example, revealing two nitro-S1 lifetimes for DMNB-Ser in a 10:1 DMSO/H2O mixture of 1.95 ps and (10.1 ± 1.2) ps, which are attributed to different microsolvation environments.

A new cytotoxic saponin from the ethyl acetate extract of Myrsine semiserrata wall

AbstractMyrsine semiserrata Wall. (Primulaceae) is an evergreen shrub found in some Asian regions including Northern Vietnam, Southern China, India, Nepal, and Myanmar. Its bark and leaves are utilized in leather tanning while the fruit serves as a commonly used antiseptic agent. Phytochemical study on the ethyl acetate extract from the aerial parts of this plant led to the isolation of a new saponin 3‐O‐α‐L‐arabinopyranosyl juglangenin A (1) and four known triterpenes, lupeol acetate (2), taraxerone (3), cucurbitacin D (4), and cucurbitacin H (5). Their structures were proven by analyzing 1D, 2D NMR, and HR‐ESI‐MS spectroscopic techniques. All isolated compounds were tested for their cytotoxicity on human cancer cell lines: HepG2, KB, MCF7, and A549. Compounds 4 and 5 exhibited potent activity against HepG2 and KB cell lines with IC50 values ranging from 1.06 to 5.99 µm. Saponin substance 1 demonstrated action against all cancer cell lines with IC50 values of 74.26, 42.83, 40.65, and 70.82 µm, respectively.

Combining Laser-Induced Breakdown Spectroscopy and Visible Near-Infrared Spectroscopy for Predicting Soil Organic Carbon and Texture: A Danish National-Scale Study

Laser-induced breakdown spectroscopy (LIBS) and visible near-infrared spectroscopy (vis-NIRS) are spectroscopic techniques that offer promising alternatives to traditional laboratory methods for the rapid and cost-effective determination of soil properties on a large scale. Despite their individual limitations, combining LIBS and vis-NIRS has been shown to enhance the prediction accuracy for the determination of soil properties compared to single-sensor approaches. In this study, we used a comprehensive Danish national-scale soil dataset encompassing mostly sandy soils collected from various land uses and soil depths to evaluate the performance of LIBS and vis-NIRS, as well as their combined spectra, in predicting soil organic carbon (SOC) and texture. Firstly, partial least squares regression (PLSR) models were developed to correlate both LIBS and vis-NIRS spectra with the reference data. Subsequently, we merged LIBS and vis-NIRS data and developed PLSR models for the combined spectra. Finally, interval partial least squares regression (iPLSR) models were applied to assess the impact of variable selection on prediction accuracy for both LIBS and vis-NIRS. Despite being fundamentally different techniques, LIBS and vis-NIRS displayed comparable prediction performance for the investigated soil properties. LIBS achieved a root mean square error of prediction (RMSEP) of <7% for texture and 0.5% for SOC, while vis-NIRS achieved an RMSEP of <8% for texture and 0.5% for SOC. Combining LIBS and vis-NIRS spectra improved the prediction accuracy by 16% for clay, 6% for silt and sand, and 2% for SOC compared to single-sensor LIBS predictions. On the other hand, vis-NIRS single-sensor predictions were improved by 10% for clay, 17% for silt, 16% for sand, and 4% for SOC. Furthermore, applying iPLSR for variable selection improved prediction accuracy for both LIBS and vis-NIRS. Compared to LIBS PLSR predictions, iPLSR achieved reductions of 27% and 17% in RMSEP for clay and sand prediction, respectively, and an 8% reduction for silt and SOC prediction. Similarly, vis-NIRS iPLSR models demonstrated reductions of 6% and 4% in RMSEP for clay and SOC, respectively, and a 3% reduction for silt and sand. Interestingly, LIBS iPLSR models outperformed combined LIBS-vis-NIRS models in terms of prediction accuracy. Although combining LIBS and vis-NIRS improved the prediction accuracy of texture and SOC, LIBS coupled with variable selection had a greater benefit in terms of prediction accuracy. Future studies should investigate the influence of reference method uncertainty on prediction accuracy.

Synthesis of Technetium Carboxylates: Wheel-Like Octanuclear Clusters (Tc8(μ-O)8(RCOO)16, Where R = CF3, C6H5)─Potential Nanobuilding Units for Tc-MOFs.

Herein, we studied the behavior of TcO4- in trifluoroacetic anhydride (TFAA) under visible light irradiation in situ by UV-vis spectroscopy. One carboxylate of Tc(VII) C2F3O5Tc (1) and two wheel-like carboxylate clusters of Tc(IV) Tc8(μ-O)8(CF3COO)16 (2, 3) and Tc8(μ-O)8(C6H5COO)16 (4) were synthesized and analyzed using pXRD, TGA, UV-vis spectroscopy, and SCXRD techniques. According to SCXRD, it was found that Tc(IV) trifluoroacetate exists in two crystalline modifications. By UV-vis spectroscopy and DFT calculations, it was shown that the primary compound in the reaction system is trifluoroacetate Tc(VII). A technetium trifluoroacetate(VII) and Tc intermediates of unidentified nature both show photosensitivity. The influence of intermolecular noncovalent interactions on the volatility of trifluoroacetate and benzoate Tc(IV) is shown. The main regularities of chemical transformations of technetium in nonaqueous solutions of carboxylates have been revealed. The obtained data on the kinetics of the process suggest that technetium in trifluoroacetic anhydride can simultaneously exist in the form of Tc(VII), Tc(VI), Tc(V), and Tc(IV). Under laser ionization or prolonged heating, the formation of the Tc(II,III)-cluster is observed.