Targeting Induced Local Lesions IN Genomes Population Research Articles

A TILLING by sequencing approach to identify induced mutations in sunflower genes

The Targeting Induced Local Lesions in Genomes (TILLING) technology is a reverse genetic strategy broadly applicable to every kind of genome and represents an attractive tool for functional genomic and agronomic applications. It consists of chemical random mutagenesis followed by high-throughput screening of point mutations in targeted genomic regions. Although multiple methods for mutation discovery in amplicons have been described, next-generation sequencing (NGS) is the tool of choice for mutation detection because it quickly allows for the analysis of a large number of amplicons. The aim of the present work was to screen a previously generated sunflower TILLING population and identify alterations in genes involved in several important and complex physiological processes. Twenty-one candidate sunflower genes were chosen as targets for the screening. The TILLING by sequencing strategy allowed us to identify multiple mutations in selected genes and we subsequently validated 16 mutations in 11 different genes through Sanger sequencing. In addition to addressing challenges posed by outcrossing, our detection and validation of mutations in multiple regulatory loci highlights the importance of this sunflower population as a genetic resource.

β-Amyrin Synthase1 Controls the Accumulation of the Major Saponins Present in Pea (Pisum sativum).

The use of pulses as ingredients for the production of food products rich in plant proteins is increasing. However, protein fractions prepared from pea or other pulses contain significant amounts of saponins, glycosylated triterpenes that can impart an undesirable bitter taste when used as an ingredient in foodstuffs. In this article, we describe the identification and characterization of a gene involved in saponin biosynthesis during pea seed development, by screening mutants obtained from two Pisum sativum TILLING (Targeting Induced Local Lesions INGenomes) populations in two different genetic backgrounds. The mutations studied are located in a gene designated PsBAS1 (β-amyrin synthase1), which is highly expressed in maturing pea seeds and which encodes a protein previously shown to correspond to an active β-amyrin synthase. The first allele is a nonsense mutation, while the second mutation is located in a splice site and gives rise to a mis-spliced transcript encoding a truncated, nonfunctional protein. The homozygous mutant seeds accumulated virtually nosaponin without affecting the seed nutritional or physiological quality. Interestingly, BAS1 appears to control saponin accumulation in all other tissues of the plant examined. These lines represent a first step in the development of pea varieties lacking bitterness off-flavors in their seeds. Our work also shows that TILLING populations in different genetic backgrounds represent valuable genetic resources for both crop improvement and functional genomics.

Fast and Inexpensive Phenotyping and Genotyping Methods for Evaluation of Barley Mutant Population.

To further develop barley breeding and genetics, more information on gene functions based on the analysis of the mutants of each gene is needed. However, the mutant resources are not as well developed as the model plants, such as Arabidopsis and rice. Although genome editing techniques have been able to generate mutants, it is not yet an effective method as it can only be used to transform a limited number of cultivars. Here, we developed a mutant population using ‘Mannenboshi’, which produces good quality grains with high yields but is susceptible to disease, to establish a Targeting Induced Local Lesions IN Genomes (TILLING) system that can isolate mutants in a high-throughput manner. To evaluate the availability of the prepared 8043 M3 lines, we investigated the frequency of mutant occurrence using a rapid, visually detectable waxy phenotype as an indicator. Four mutants were isolated and single nucleotide polymorphisms (SNPs) were identified in the Waxy gene as novel alleles. It was confirmed that the mutations could be easily detected using the mismatch endonuclease CELI, revealing that a sufficient number of mutants could be rapidly isolated from our TILLING population.

Development of Targeting Induced Local Lesions IN Genomes (TILLING) Populations in Small Grain Crops by Ethyl Methanesulfonate Mutagenesis.

Targeting Induced Local Lesions IN Genomes (TILLING) is a powerful reverse genetics tool that includes chemical mutagenesis and detection of sequence variation in target genes. TILLING is a highly valuable functional genomics tool for gene validation, especially in small grains in which transformation-based approaches hold serious limitations. Developing a robust mutagenized population is key to determining the efficiency of a TILLING-based gene validation study. A TILLING population with a low overall mutation frequency indicates that an impractically large population must be screened to find desired mutations, whereas a high mutagen concentration leads to high mortality in the population, leading to an insufficient number of mutagenized individuals. Once an effective population is developed, there are multiple ways to detect mutations in a gene of interest, and the choice of platform depends upon the experimental scale and availability of resources. The Cel-1 assay and agarose gel-based approach for mutant identification is convenient, reproducible, and a less resource-intensive platform. It is advantageous in that it is simple, requiring no computational knowledge, and it is especially suitable for validation of a small number of genes with basic lab equipment. In the present article, described are the methods for development of a good TILLING population, including preparation of the dosage curve, mutagenesis and maintenance of the mutant population, and screening of the mutant population using the PCR-based Cel-1 assay.

The dmc1 Mutant Allows an Insight Into the DNA Double-Strand Break Repair During Meiosis in Barley (Hordeum vulgare L.).

Meiosis is a process of essential importance for sexual reproduction, as it leads to production of gametes. The recombination event (crossing-over) generates genetic variation by introducing new combination of alleles. The first step of crossing-over is introduction of a targeted double-strand break (DSB) in DNA. DMC1 (Disrupted Meiotic cDNA1) is a recombinase that is specific only for cells undergoing meiosis and takes part in repair of such DSBs by searching and invading homologous sequences that are subsequently used as a template for the repair process. Although role of the DMC1 gene has been validated in Arabidopsis thaliana, a functional analysis of its homolog in barley, a crop species of significant importance in agriculture, has never been performed. Here, we describe the identification of barley mutants carrying substitutions in the HvDMC1 gene. We performed mutational screening using TILLING (Targeting Induced Local Lesions IN Genomes) strategy and the barley TILLING population, HorTILLUS, developed after double-treatment of spring barley cultivar ‘Sebastian’ with sodium azide and N-methyl-N-nitrosourea. One of the identified alleles, dmc1.c, was found independently in two different M2 plants. The G2571A mutation identified in this allele leads to a substitution of the highly conserved amino acid (arginine-183 to lysine) in the DMC1 protein sequence. Two mutant lines carrying the same dmc1.c allele show similar disturbances during meiosis. The chromosomal aberrations included anaphase bridges and chromosome fragments in anaphase/telophase I and anaphase/telophase II, as well as micronuclei in tetrads. Moreover, atypical tetrads containing three or five cells were observed. A highly increased frequency of all chromosome aberrations during meiosis have been observed in the dmc1.c mutants compared to parental variety. The results indicated that DMC1 is required for the DSB repair, crossing-over and proper chromosome disjunction during meiosis in barley.

TILLING in Barley.

TILLING (Targeting Induced Local Lesions IN Genomes), a popular reverse genetics approach in barley research, combines plant mutagenesis with efficient mutation detection for studying biological function of a specific gene. The high mutation frequency within a TILLING population principally enables the identification of induced variations in (almost) all genes of a given species (more precisely a given genotype of a species) of interest, which can be tested for their functional impact on morphological and/or physiological characteristics of the plant. Several TILLING populations induced by chemical mutagenesis were established for barley (Talame et al., Plant Biotechnol J 6:477-485, 2008; Gottwald et al., BMC Res Notes 2:258, 2009; Caldwell et al. Plant J 40:143-150, 2004) and showed the possibility for adapting protocols to develop further populations. This chapter describes a chemical mutagenesis protocol for barley seeds and two independent procedures for efficient single nucleotide polymorphism (SNP) detection in a large number of mutagenized plants either by slab-gel- or capillary gel-based electrophoreses on the LI-COR 4300 DNA Analyzer and the AdvanCE FS96 instruments, respectively.

HorTILLUS-A Rich and Renewable Source of Induced Mutations for Forward/Reverse Genetics and Pre-breeding Programs in Barley (Hordeum vulgare L.).

TILLING (Targeting Induced Local Lesions IN Genomes) is a strategy used for functional analysis of genes that combines the classical mutagenesis and a rapid, high-throughput identification of mutations within a gene of interest. TILLING has been initially developed as a discovery platform for functional genomics, but soon it has become a valuable tool in development of desired alleles for crop breeding, alternative to transgenic approach. Here we present the HorTILLUS (Hordeum—TILLING—University of Silesia) population created for spring barley cultivar “Sebastian” after double-treatment of seeds with two chemical mutagens: sodium azide (NaN3) and N-methyl-N-nitrosourea (MNU). The population comprises more than 9,600 M2 plants from which DNA was isolated, seeds harvested, vacuum-packed, and deposited in seed bank. M3 progeny of 3,481 M2 individuals was grown in the field and phenotyped. The screening for mutations was performed for 32 genes related to different aspects of plant growth and development. For each gene fragment, 3,072–6,912 M2 plants were used for mutation identification using LI-COR sequencer. In total, 382 mutations were found in 182.2 Mb screened. The average mutation density in the HorTILLUS, estimated as 1 mutation per 477 kb, is among the highest mutation densities reported for barley. The majority of mutations were G/C to A/T transitions, however about 8% transversions were also detected. Sixty-one percent of mutations found in coding regions were missense, 37.5% silent and 1.1% nonsense. In each gene, the missense mutations with a potential effect on protein function were identified. The HorTILLUS platform is the largest of the TILLING populations reported for barley and best characterized. The population proved to be a useful tool, both in functional genomic studies and in forward selection of barley mutants with required phenotypic changes. We are constantly renewing the HorTILLUS population, which makes it a permanent source of new mutations. We offer the usage of this valuable resource to the interested barley researchers on cooperative basis.

TILLING by Sequencing (TbyS) for targeted genome mutagenesis in crops

TILLING (Targeting Induced Local Lesions in Genomes) by Sequencing (TbyS) refers to the application of high-throughput sequencing technologies to mutagenised TILLING populations as a tool for functional genomics. TbyS can be used to identify and characterise induced variation in genes (controlling traits of interest) within large mutant populations, and is a powerful approach for the study and harnessing of genetic variation in crop breeding programmes. The extension of existing TILLING platforms by TbyS will accelerate crop functional genomics studies, in concert with the rapid increase in genome editing capabilities and the number and quality of sequenced crop plant genomes. In this mini-review, we provide an overview of the growth of TbyS and its potential applications to crop molecular breeding.

COTIP: Cotton TILLING Platform, a Resource for Plant Improvement and Reverse Genetic Studies.

Cotton is cultivated worldwide for its white fiber, of which around 90% is tetraploid upland cotton (Gossypium hirsutum L.) carrying both A and D genome. Since centuries, yield increasing efforts for the cotton crop by conventional breeding approaches have caused an extensive erosion of natural genetic variability. Mutation based improvement strategies provide an effective way of creating new allelic variations. Targeting Induced Local Lesions IN Genomes (TILLING) provides a mutation based reverse genetic strategy to create and evaluate induced genetic variability at DNA level. Here, we report development and testing of TILLING populations of allotetraploid cotton (G. hirsutum) for functional genomic studies and mutation based enrichment of cotton genetic resources. Seed of two cotton cultivars “PB-899 and PB-900” were mutagenized with 0.3 and 0.2% (v/v) ethyl methanesulfonate, respectively. The phenotyping of M1 and M2 populations presented numerous mutants regarding the branching pattern, leaf morphology, disease resistance, photosynthetic lesions and flower sterility. Molecular screening for point mutations was performed by TILLING PCR aided CEL1 mismatch cleavage. To estimate the mutation frequency in the mutant genomes, five gene classes were TILLed in 8000 M2 plants of each var. “PB-899” and “PB-900.” These include actin (GhACT), Pectin Methyl Esterase (GhPME), sucrose synthase (GhSUS), resistance gene analog, and defense response gene (DRGs). The var. PB-899 was harboring 47% higher mutation induction rate than PB-900. The highest rate of mutation frequency was identified for NAC-TF5 (EU706348) of DRGs class, ranging from 1/58 kb in PB-899 to 1/105 kb in PB-900. The mutation screening assay revealed the presence of significant proportion of induced mutations in cotton TILLING populations such as 1/153 kb and 1/326 kb in var. “PB-899” and “PB-900,” respectively. The establishment of a cotton TILLING platform (COTIP) and data obtained from the resource TILLING population suggest its effectiveness in widening the genetic bases of cotton for improvement and utilizing it for subsequent reverse genetic studies of various genes.

Highly efficient de novo mutant identification in a Sorghum bicolor TILLING population using the ComSeq approach

Screening large populations for carriers of known or de novo rare single nucleotide polymorphisms (SNPs) is required both in Targeting induced local lesions in genomes (TILLING) experiments in plants and in screening of human populations. We previously suggested an approach that combines the mathematical field of compressed sensing with next-generation sequencing to allow such large-scale screening. Based on pooled measurements, this method identifies multiple carriers of heterozygous or homozygous rare alleles while using only a small fraction of resources. Its rigorous mathematical foundations allow scalable and robust detection, and provide error correction and resilience to experimental noise. Here we present a large-scale experimental demonstration of our computational approach, in which we targeted a TILLING population of 1024 Sorghum bicolor lines to detect carriers of de novo SNPs whose frequency was less than 0.1%, using only 48 pools. Subsequent validation confirmed that all detected lines were indeed carriers of the predicted mutations. This novel approach provides a highly cost-effective and robust tool for biologists and breeders to allow identification of novel alleles and subsequent functional analysis.

Variability in yield traits of TILLING population of bread wheat (Triticum aestivum L.)

Mutagenesis is one of the powerful genetic strategies for crop improvement programmes. A chemically induced mutated genetic resource for detecting novel variations by Targeting Induced Local Lesions IN Genomes (TILLING) has been developed in recently released bread wheat (Triticum aestivum) cultivar DPW621-50. A total of 3,478 M2 plants were evaluated for plant height, number of tillers/plant, thousand grain weight, number of seeds/spike and grain yield/plant. A large variation was observed for all the traits. The highest frequency (52.2%) of lines had similar height between 91-100 cm to the non-mutagenized DPW 621-50 control followed by 28.9% of lines with height between 81-90 cm. A large variation was observed in number of tillers/plant which ranged from 1-35 tillers/plant. The highest frequency (32.09%) lines had 31-40 seeds/spike followed by 29.84% lines with 41-50 seeds/spike. Few lines (0.35%) had more than 70 seeds/spike with normal seed size as their thousand grain weight ranged between 34.82-43.82g. Chlorophyll deficient, grassy type and sterile mutants were also observed. This population may serve as new genetic resource for functional genomics studies and novel variants for different traits in elite germplasm can be made available to the plant breeders for wheat improvement.

TILLING by sequencing to identify induced mutations in stress resistance genes of peanut (Arachis hypogaea).

BackgroundTargeting Induced Local Lesions in Genomes (TILLING) is a powerful reverse genetics approach for functional genomics studies. We used high-throughput sequencing, combined with a two-dimensional pooling strategy, with either minimum read percentage with non-reference nucleotide or minimum variance multiplier as mutation prediction parameters, to detect genes related to abiotic and biotic stress resistances. In peanut, lipoxygenase genes were reported to be highly induced in mature seeds infected with Aspergillus spp., indicating their importance in plant-fungus interactions. Recent studies showed that phospholipase D (PLD) expression was elevated more quickly in drought sensitive lines than in drought tolerant lines of peanut. A newly discovered lipoxygenase (LOX) gene in peanut, along with two peanut PLD genes from previous publications were selected for TILLING. Additionally, two major allergen genes Ara h 1 and Ara h 2, and fatty acid desaturase AhFAD2, a gene which controls the ratio of oleic to linoleic acid in the seed, were also used in our study. The objectives of this research were to develop a suitable TILLING by sequencing method for this allotetraploid, and use this method to identify mutations induced in stress related genes.ResultsWe screened a peanut root cDNA library and identified three candidate LOX genes. The gene AhLOX7 was selected for TILLING due to its high expression in seeds and roots. By screening 768 M2 lines from the TILLING population, four missense mutations were identified for AhLOX7, three missense mutations were identified for AhPLD, one missense and two silent mutations were identified for Ara h 1.01, three silent and five missense mutations were identified for Ara h 1.02, one missense mutation was identified for AhFAD2B, and one silent mutation was identified for Ara h 2.02. The overall mutation frequency was 1 SNP/1,066 kb. The SNP detection frequency for single copy genes was 1 SNP/344 kb and 1 SNP/3,028 kb for multiple copy genes.ConclusionsOur TILLING by sequencing approach is efficient to identify mutations in single and multi-copy genes. The mutations identified in our study can be used to further study gene function and have potential usefulness in breeding programs.Electronic supplementary materialThe online version of this article (doi:10.1186/s12864-015-1348-0) contains supplementary material, which is available to authorized users.

Development and evaluation of a cucumber TILLING population.

BackgroundOrdered collections of mutants serve as invaluable tools in biological research. TILLING (Targeting Induced Local Lesions IN Genomes) provides an efficient method to discover, in mutagenized populations, the possible phenotypes controlled by gene sequences whose function is unknown. This method can replace transgenic techniques for the functional validation of cloned genes, especially in the case of transformation-recalcitrant plants such as cucumber.ResultsWe report the development of a TILLING cucumber population, generated by EMS mutagenesis in the Poinsett76 genetic background. The population was evaluated by screening for morphological mutations, and a range of developmental, pigmentation and spontaneous lesion mutants were observed. Suitability for detecting single nucleotide polymorphism in selected genes has been tested by screening a sample of amplicons, with detection rate of 1 SNP in ~1 Mbp.ConclusionThe population described in this Research Note represents a useful asset in cucumber research, to be exploited for forward genetic screens and functional genomics purposes.

New starch phenotypes produced by TILLING in barley.

Barley grain starch is formed by amylose and amylopectin in a 1∶3 ratio, and is packed into granules of different dimensions. The distribution of granule dimension is bimodal, with a majority of small spherical B-granules and a smaller amount of large discoidal A-granules containing the majority of the starch. Starch granules are semi-crystalline structures with characteristic X-ray diffraction patterns. Distinct features of starch granules are controlled by different enzymes and are relevant for nutritional value or industrial applications. Here, the Targeting-Induced Local Lesions IN Genomes (TILLING) approach was applied on the barley TILLMore TILLING population to identify 29 new alleles in five genes related to starch metabolism known to be expressed in the endosperm during grain filling: BMY1 (Beta-amylase 1), GBSSI (Granule Bound Starch Synthase I), LDA1 (Limit Dextrinase 1), SSI (Starch Synthase I), SSIIa (Starch Synthase IIa). Reserve starch of nine M3 mutant lines carrying missense or nonsense mutations was analysed for granule size, crystallinity and amylose/amylopectin content. Seven mutant lines presented starches with different features in respect to the wild-type: (i) a mutant line with a missense mutation in GBSSI showed a 4-fold reduced amylose/amylopectin ratio; (ii) a missense mutations in SSI resulted in 2-fold increase in A:B granule ratio; (iii) a nonsense mutation in SSIIa was associated with shrunken seeds with a 2-fold increased amylose/amylopectin ratio and different type of crystal packing in the granule; (iv) the remaining four missense mutations suggested a role of LDA1 in granule initiation, and of SSIIa in determining the size of A-granules. We demonstrate the feasibility of the TILLING approach to identify new alleles in genes related to starch metabolism in barley. Based on their novel physicochemical properties, some of the identified new mutations may have nutritional and/or industrial applications.

Development of a TILLING resource in durum wheat for reverse- and forward-genetic analyses

A durum wheat TILLING (targeting induced local lesions in genomes) population of 2601 M3 families was developed from cv. Svevo using ethyl methanesulfonate as a chemical mutagen. The entire M3 population was field-grown for phenotypic evaluations. Despite the polyploid nature of the wheat genome, a preliminarily phenotypic screening showed a high frequency of morphological alterations (~22%); specific phenotyping for seed morphology was undertaken. Furthermore, a reverse-genetics experiment was performed on DNA collected from M2 leaves for the homoeologous genes SBEIIa-A and SBEIIa-B involved in starch metabolism. One non-sense mutation for both genes was identified; specific crosses are planned in order to pyramid the two mutations.

Development and Characterization of a New TILLING Population of Common Bread Wheat (Triticum aestivum L.)

Mutagenesis is an important tool in crop improvement. However, the hexaploid genome of wheat (Triticum aestivum L.) presents problems in identifying desirable genetic changes based on phenotypic screening due to gene redundancy. TILLING (Targeting Induced Local Lesions IN Genomes), a powerful reverse genetic strategy that allows the detection of induced point mutations in individuals of the mutagenized populations, can address the major challenge of linking sequence information to the biological function of genes and can also identify novel variation for crop breeding. Wheat is especially well-suited for TILLING due to the high mutation densities tolerated by polyploids. However, only a few wheat TILLING populations are currently available in the world, which is far from satisfying the requirement of researchers and breeders in different growing environments. In addition, current TILLING screening protocols require costly fluorescence detection systems, limiting their use, especially in developing countries. We developed a new TILLING resource comprising 2610 M2 mutants in a common wheat cultivar ‘Jinmai 47’. Numerous phenotypes with altered morphological and agronomic traits were observed from the M2 and M3 lines in the field. To simplify the procedure and decrease costs, we use unlabeled primers and either non-denaturing polyacrylamide gels or agarose gels for mutation detection. The value of this new resource was tested using PCR with RAPD and Intron-spliced junction (ISJ) primers, and also TILLING in three selected candidate genes, in 300 and 512 mutant lines, revealing high mutation densities of 1/34 kb by RAPD/ISJ analysis and 1/47 kb by TILLING. In total, 31 novel alleles were identified in the 3 targeted genes and confirmed by sequencing. The results indicate that this mutant population represents a useful resource for the wheat research community. We hope that the use of this reverse genetics resource will provide novel allelic diversity for wheat improvement and functional genomics.

Development of TILLING by sequencing platform towards enhanced leaf yield in tobacco

Tobacco being a non-food commercial crop, has gained attention for alternate uses apart from its use for making cigarettes. Leaf yield is a major economic produce in tobacco. In order to screen for mutants that enhance leaf yield and its associated metabolic traits, we generated an Ethyl Methane Sulphonate (EMS) mutant population also referred to as TILLING (Targeting Induced Local Lesions IN Genomes) population. DNA and seed libraries were prepared from 7800M2 plants. High throughput sequencing technology combined with 3D pooling of amplicons from 3072M2 plants was deployed for mutation screening. In total, seven induced mutations were identified in genes potentially linked with leaf biomass (Ntfw2.2 and NtLs) and secondary metabolism (NtMYB12 and NtGGR). Overall mutation density of one mutation per 1.423 million bases or ∼3162 mutations per genome was observed in the population. Out of the three candidate point mutations identified in Ntfw2.2, the mutation that resulted a premature stop codon was converted to a simple High Resolution Melting (HRM) DNA marker. Additionally, mutants with traits such as increase in number of leaves and broader leaves were selected from the population and advanced to further generations. This study provided evidence to suggest that mutants with agronomic superior phenotypes identified by forward and reverse genetic approaches (TILLING) could contribute potentially towards crop improvement in tobacco.

Cotton genetic resources. A review

Since 6000 BC, cotton has been cultivated for lint fiber, which now dominates the natural textile industry worldwide. Common resources such as an integrated web database, a microsatellite database, and comparative quantitative trait loci (QTL) resources for Gossypium have accelerated the progress towards quantifying the impact of repeated human dispersals and selection regimes on various gene pools of the genus Gossypium. Out of 50 Gossypium species, four have been domesticated—two diploids and two tetraploids—for elimination of hard seed coat, improvement in lint percentage of about 40% and fiber length of 22%, larger boll size, and day-neutral reproductive habit. The major drawback of domestication is the lack of genetic diversity. This lack of genetic diversity is observed more in Gossypium hirsutum L. cultivars characterizing upland cotton than in Gossypium barbadense, typical of Pima and Egyptian cotton. Much of the genetic diversity among G. barbadense cultivars is attributed to the introgression of G. hirsutum alleles. This process highlights the importance of introgression of new alleles from accessions of all the Gossypium species into cultivated cotton species. Among the genomic resources, about 16,162 publicly available SSRs and 312 mapped cotton RFLP sequences containing simple sequence repeat (SSR), restriction fragment length polymorphism (RFLP), amplified fragment length polymorphism (AFLP), and random amplified polymorphic DNA (RAPD) markers have been surveyed on numerous mapping populations, and developed about 26 linkage maps (SSR, RFLP, AFLP, and RAPD). Reports show the identification of DNA markers associated with over 29 important traits or QTLs such as fiber quality and yield, leaf and flower morphology, trichome density and their distribution, and disease resistance. In comparative mapping studies, 432 QTLs mapped on 11 different mapping populations were aligned on a high-density reference map containing 3,475 loci. In a meta-analysis study of over 1,000 QTLs obtained from backcross population and recombinant inbred line populations derived from the same parents, most consistent meta-clusters were reported for fiber color, fineness, and length. For exploring the function of genes, the targeting induced local lesions in genomes (TILLING) approach—avoiding gene transfer process was used for identifying a brassino steroid receptor gene that is involved in fiber development. Lastly, cotton genome has been enriched with genes isolated from distantly related organisms using various transformation methods. For example, Cry1Ac, Cry1Ab, and herbicide-resistant genes were transformed in cotton that covered a vast majority of cotton acreage worldwide. Here the authors discuss investigations for improving the efficacy of transformation and regeneration systems, and for searching new genes or silencing the unwanted cotton genes using RNAi technology. We suggest initiating projects on sequencing the diploid and tetraploid genomes for exploring the extent of genetic variations, developing TILLING populations, initiating nested association mapping studies, and developing third generation genetically modified cotton, collectively setting the stage for sustaining cotton production under continually changing production conditions, climates, and human needs.

TILLING: a shortcut in functional genomics.

Recent advances in large-scale genome sequencing projects have opened up new possibilities for the application of conventional mutation techniques in not only forward but also reverse genetics strategies. TILLING (Targeting Induced Local Lesions IN Genomes) was developed a decade ago as an alternative to insertional mutagenesis. It takes advantage of classical mutagenesis, sequence availability and high-throughput screening for nucleotide polymorphisms in a targeted sequence. The main advantage of TILLING as a reverse genetics strategy is that it can be applied to any species, regardless of its genome size and ploidy level. The TILLING protocol provides a high frequency of point mutations distributed randomly in the genome. The great mutagenic potential of chemical agents to generate a high rate of nucleotide substitutions has been proven by the high density of mutations reported for TILLING populations in various plant species. For most of them, the analysis of several genes revealed 1 mutation/200–500 kb screened and much higher densities were observed for polyploid species, such as wheat. High-throughput TILLING permits the rapid and low-cost discovery of new alleles that are induced in plants. Several research centres have established a TILLING public service for various plant species. The recent trends in TILLING procedures rely on the diversification of bioinformatic tools, new methods of mutation detection, including mismatch-specific and sensitive endonucleases, but also various alternatives for LI-COR screening and single nucleotide polymorphism (SNP) discovery using next-generation sequencing technologies. The TILLING strategy has found numerous applications in functional genomics. Additionally, wide applications of this throughput method in basic and applied research have already been implemented through modifications of the original TILLING strategy, such as Ecotilling or Deletion TILLING.

Development and characterization of an oat TILLING-population and identification of mutations in lignin and β-glucan biosynthesis genes

BackgroundOat, Avena sativa is the sixth most important cereal in the world. Presently oat is mostly used as feed for animals. However, oat also has special properties that make it beneficial for human consumption and has seen a growing importance as a food crop in recent decades. Increased demand for novel oat products has also put pressure on oat breeders to produce new oat varieties with specific properties such as increased or improved β-glucan-, antioxidant- and omega-3 fatty acid levels, as well as modified starch and protein content. To facilitate this development we have produced a TILLING (Targeting Induced Local Lesions IN Genomes) population of the spring oat cultivar SW Belinda.ResultsHere a population of 2600 mutagenised M2 lines, producing 2550 M3 seed lots were obtained. The M2 population was initially evaluated by visual inspection and a number of different phenotypes were seen ranging from dwarfs to giants, early flowering to late flowering, leaf morphology and chlorosis. Phloroglucinol/HCl staining of M3 seeds, obtained from 1824 different M2 lines, revealed a number of potential lignin mutants. These were later confirmed by quantitative analysis. Genomic DNA was prepared from the M2 population and the mutation frequency was determined. The estimated mutation frequency was one mutation per 20 kb by RAPD-PCR fingerprinting, one mutation per 38 kb by MALDI-TOF analysis and one mutation per 22.4 kb by DNA sequencing. Thus, the overall mutation frequency in the population is estimated to be one mutation per 20-40 kb, depending on if the method used addressed the whole genome or specific genes. During the investigation, 6 different mutations in the phenylalanine ammonia-lyase (AsPAL1) gene and 10 different mutations in the cellulose synthase-like (AsCslF6) β-glucan biosynthesis gene were identified.ConclusionThe oat TILLING population produced in this work carries, on average, hundreds of mutations in every individual gene in the genome. It will therefore be an important resource in the development of oat with specific characters. The population (M5) will be available for academic research via Nordgen http://www.nordgen.org as soon as enough seeds are obtained.[Genbank accession number for the cloned AsPAL1 is GQ373155 and GQ379900 for AsCslF6]