Tan-Lu Fault Zone Research Articles

Inhomogeneous strain partitioning in the Cenozoic Bohai Bay Basin controlled by pre-existing crustal fabrics and oblique subduction: Insights from the Jizhong and Huanghua subbasins

The tectonic features and geodynamics of the Bohai Bay Basin (BBB) have been extensively studied over several decades. It is generally accepted that the Cenozoic BBB was subjected to a superimposed extensional and strike-slip stress field. However, the specific basin-forming mechanism remains ambiguous. Basin-scale studies with high spatial and temporal resolution reveal how strain migrates and localizes during multiphase rifting. Understanding these strain-related processes is crucial for deciphering the formation mechanisms and controlling factors of rift basins. This study investigates the rift-related evolution and strain partitioning in the Jizhong and Huanghua subbasins, the western half of the BBB. Using high-resolution 3D and 2D seismic datasets and well data, we present detailed geological sections, residual thickness maps, and fault systems, showing two distinct patterns of strain partitioning in the Cenozoic. In the Jizhong Subbasin, strain migrated inwards from the NE-trending boundary faults and finally became localized along the NE-trending rift axis; in the Huanghua Subbasin, strain migrated northeastwards from the southern part and then was largely localized along the near E–W-trending faults in the northeastern part. By integrating our results with previous studies of other subbasins, we identify two separate extensional domains within the Cenozoic BBB. The suborthogonal extensional domain in the Jizhong Subbasin is dominated by relatively stable NW–SE extension. In contrast, the extended areas to the east (i.e., the Huanghua, Bozhong, and Liaohe-Liaodongwan subbasins) comprise the oblique extensional domain, characterized by asymmetric transtensional pull-apart deformation and subjected to a clockwise-rotated extensional stress field from NW–SE to NNW–SSE. We suggest that the spatially inhomogeneous strain partitioning in the BBB has developed since the middle Eocene, and was controlled by the interaction of pre-existing crustal fabrics (e.g., the Tan-Lu Fault Zone) and the oblique subduction of the Pacific Plate. The boundary between the two domains may represent a transition zone where the margin-parallel residual velocity component of the oblique convergence decreased considerably landwards. Our study highlights the Cenozoic strain evolution and the associated geodynamics in the BBB, emphasizing the strain complexity within the back-arc rift basin under the oblique subduction background.

Vertical high-velocity structures and seismic activity in western Shandong Rise, China: Case study inspired by double-difference seismic tomography

Abstract In this article, we collected the seismic phase arrival data (115°–120°E, 34°–39°N) of 2,833 local natural earthquakes above magnitude 1.0 recorded by 128 seismograph stations provided by the China Earthquake Networks Center covering the period from January 2008 to October 2023. We extracted the first arrival P- and S-wave arrival time data and obtained 26,351 P- and 26,349 S-wave absolute arrival times and 99,627 P-differential and 99,625 S-differential arrival times. Then, we determined 3-D P and S wave velocity structures under the Luxi region by using the double-difference tomography method. The results show lateral heterogeneities under the Luxi region, and the distribution of surface basins and uplift zones is associated with seismic velocities within the crust. The vertical section shows the widespread presence of vertical high-velocity bodies within the crust of the Luxi region, indicating seismological evidence of mantle upwelling in the region. Meanwhile, our imaging results also clearly indicate the presence of a significant low-velocity anomaly at depths of 13–17 km, which corresponds to the presence of a high-conductivity layer at that depth obtained from electromagnetic bathymetry. The transition zone between high and low velocities exists at a depth of 7–13 km, which plays an important role in the transfer of lithospheric stresses from the deep to the shallow part of the lithosphere. Combined with the results of the previous deep seismic wave velocity structure, petrology, and geological investigations, the deep dynamical background of the formation of slip tectonics and seismic mechanism in the Luxi area can be attributed to the go-slip activity of the Tan-Lu fault Zone, the subduction of the Pacific Plate, and the magmatism generated by mantle upwelling.

Structure and Evolution of Multi-Trend Faults in BZ19-6 Buried Hill of the Bohai Bay Basin, Eastern China

Defining the structure and evolution of multi-trend faults is critical for analyzing the accumulation of hydrocarbons in buried hills. Based on high-resolution seismic and drilling data, the structural characteristics and evolutionary mechanism of multi-trend faults were investigated in detail through the structural analysis theory and quantitative calculations of fault activity, allowing us to determine the implication that fault evolution exerts on hydrocarbon accumulation in the BZ19-6 buried hill. There are four kinds of strike faults developed on the buried hill: SN-, NNE-, NE–ENE-, and nearly EW-trending, which experienced the Mesozoic Indosinian, Yanshan, and Cenozoic Himalayan tectonic movements. During the Indosinian, the BZ19-6 was in a SN-oriented compressional setting, with active faults composed of SN-trending strike-slip faults (west branch of the Tanlu fault zone) and near EW-trending thrust faults (Zhang-peng fault zone). During the Yanshanian, the NNE-trending normal faults were formed under the WNW–ESE tensile stress field. Since the Himalayan period, the BZ19-6 buried hill has evolved into the rifting stage. In rifting stage Ⅰ, all of the multi-trend pre-existing faults were reactivated, and the EW-trending thrust faults became normal faults due to negative inversion. In rifting stage II, a large number of NE–ENE-trending normal faults were newly formed in the NW–SE-oriented extensional setting, which made the structure pattern more complicated. In rifting stage III, the buried hill entered the post-rift stage, with only part of the NNE- and NE–ENE-trending faults continuously active. Multi-trend faults are the result of the combination of various multi-phase stress fields and pre-existing structures, which have great influence on the formation of tectonic fractures and then control the distribution of high-quality reservoirs in buried hills. The fractures controlled by the NNE- and EW-trending faults have higher density and scale, and fractures controlled by NE–ENE trending faults have stronger connectivity and effectiveness. The superposition of multi-trend faults is the favorable distribution of high-quality reservoirs and the favorable accumulation area of hydrocarbon.

Seismic mapping of the central and southern segments of the Tanlu fault zone using P-wave receiver functions

The central and southern segments of the Tanlu fault zone, located in the collision boundary between the Yangtze Plate and the North China Craton, underwent complex tectonic deformation associated with the Pacific Plate subduction. The crustal thickness and Vp/Vs ratio are important parameters for comprehending tectonic evolution and geodynamic processes. By integrating a newly dense seismic array, our results based on P-wave receiver function analyses reveal the crust thickness varies significantly across the Tanlu fault zone. The Yangtze Plate is characterized by a thinner crust, contrasting a thicker crust imaged in the North China Craton, indicating the Tanlu fault zone is a prominent structural block boundary. The Vp/Vs ratio within the Tanlu fault zone is visibly higher than its surroundings, probably correlating with abundant fluids activity along the fault zone, as a result of the subduction of the Pacific Plate. Additionally, we observe a gradually deepening Moho discontinuity beneath the Sulu orogenic belt with a low-angle dip, presenting direct seismic evidence for supporting the ancient Yangtze Plate underthrusting beneath the Sulu orogenic belt.

A Pn-wave spectral inversion technique based on trust region reflective algorithm

This paper suggests utilizing the trust region reflective (TRR) algorithm to address the inverse problem related to seismic spectrum analysis of Pn waves. By applying this approach, it becomes feasible to simultaneously deduce the seismic moment, corner frequency, tomographic model of Pn-wave attenuation, and site responses while incorporating appropriate constraints based on prior knowledge to ensure solution accuracy. The efficacy of this method has been validated using synthetic data. Specifically, the recorded Pn waves from four underground explosions in North Korea were employed to evaluate the performance of the proposed technique. The derived seismic moment and corner frequency for these events were found to align with the characteristics of the seismic data, earthquake magnitude calculations, and empirical data. The resulting tomographic model of Pn-wave attenuation revealed a spatial distribution of high and low attenuation, indicating significant lithospheric heterogeneity in northeastern China. Areas with low Q0 and low η, such as the Xialiaohe Basin and southwestern Changbai Mountain, suggest a high-temperature environment in the upper mantle cap layer or the presence of molten substances. Conversely, regions with high Q0 and high η, like the northern Changbai Mountain and the vicinity of the eastern Tanlu Fault Zone, characterized by high Pn-wave velocity and thick crust, indicate minimal modification or destruction in the lithosphere. Furthermore, site responses were determined for 75 seismic stations in northeastern China, with their characteristics preliminarily analyzed and interpreted in conjunction with geological context. The iterative process based on the TRR algorithm for Pn-wave spectral inversion proposed in this study demonstrates robust convergence and enhances the fitting accuracy of the observed spectrum. The inversion outcomes from this spectral technique yielded synthetic Pn-wave spectra that closely matched the observed spectra of the four underground explosions in North Korea across various frequency bands for over 90 % of the stations.

Resolution analysis of the gravity survey network in the middle and south sections of Tan-Lu fault and recent changes in the gravity field

In this paper, we computed the fractal dimension of three survey areas within the central and southern sections of the Tan-Lu fault zone using fractal analysis. Subsequently, simulations were conducted to analyze the gravity response under a forward model of equivalent density changes. Additionally, we thoroughly investigated the seismic monitoring capabilities of the gravity network in the central and southern regions of the Tan-Lu fault. Expanding on these analyses. Recent gravity field variations were examined in the mid-southern segment of the Tan-Lu fault zone and its surrounding areas from 2013 to 2023. The results indicate that the observation capabilities of the northern network in the study area outperform those of the southern gravity network, with the northern network demonstrating a more evenly distributed coverage. The optimal gravity anomaly recovery effect for the entire study area is achieved at a resolution of 0.5° × 0.5°. With an equivalent observable signal in the range of 30 × 10−8 m/s2 to 40 × 10−8 m/s2, the spatial resolution of the gravity network's field source is estimated to be approximately 55 km. From 2013 to 2023, a significant positive change has been observed in the gravity field within the study area. The Tan-Lu fault zone plays a crucial role in governing the crustal movement in this region, with the dextral strike-slip movement trend of the fault persisting. Small earthquakes occur more frequently in the southern section of the fault zone, while strong earthquakes are less common. The alignment of gravity field changes with the fault strike indicates ongoing activity in the fault zone without any signs of locking. In the central segment of the Tan-Lu fault zone in the Shandong region, there appears to be a weaker correlation between gravity field changes and fault trends. This discrepancy may suggest that the area is locked, resulting in the accumulation of stress and strain. It is imperative to monitor the continuous evolution of the gravity field in this region to gain insights into potential seismic risks.

Seismotectonic segmentation controlled by magmatic underplating in the central-southern segment of Tanlu fault zone, eastern China

Intracontinental earthquakes usually cause severe casualties and property damage, yet their mechanism is still unclear. The TanLu Fault Zone (TLFZ) has been a typical large intracontinental strike-slip fault in eastern China since the Quaternary, which has hosted many large earthquakes (M ≥ 6). Generation of large earthquakes is generally closely related to the heterogeneities on and adjacent to the fault plane, which may result from different composition and inclusions of fluids. In this study, we use the receiver function method to obtain detailed distributions of Poisson's ratio and crustal thickness in the central-southern segment of the TLFZ, where the M 8.5 TanCheng earthquake occurred in 1668. We found that the distribution of earthquakes is strongly correlated with the crustal structures, both of which exhibit clear segmentation. The strongly damaged zone (with earthquake intensity ≥ 10) of the 1668 TanCheng earthquake and present small-to-moderate earthquakes are generally located above a segment that has shallower Moho and particularly higher Poisson's ratio. We propose that the high Poisson's ratio may be caused by intrusive mafic rocks in the ductile lower crust, which plays a role as local stress concentrators and subsequently leads to large intracontinental earthquakes.

Shallow Structure and Seismic Amplification Effects in the Weifang Segment of the Tanlu Fault Zone Based on the Spectral Ratio Method

Abstract The Weifang segment of the Tanlu fault zone (TLFZ) is located in the central section of the TLFZ, eastern China, and has been identified as an earthquake gap zone. Previous studies in the region have mainly focused on the crustal velocity structure and anisotropy, with limited attention to the shallow near-surface structures. In this study, we analyzed the distribution of sediment thickness and evaluated the seismic amplification effects in the Weifang segment of the TLFZ using the horizontal-to-vertical spectral ratio (HVSR) method and the standard spectral ratio (SSR) method. The data we used are from a dense array of 302 three-component seismometers deployed in 2017 for three months. The lowest peak frequency of HVSR indicates that the northwestern part of the study area exhibits relatively thicker sedimentary deposits, estimated to be 800–1200 m in thickness, consistent with both tomographic and geological studies. The SSRs are calculated from 43 regional and teleseismic earthquakes with respect to 12 reference stations. The results from SSR show strong amplification in the 0.2–2 Hz frequency range for sites on the northwestern part, and the amplitude can be up to 15 times larger than that of the bedrock site. We also find significant amplification effects as well as thick sedimentary layers at specific stations along the eastern branch of the TLFZ, suggesting a localized low-velocity zone along the fault. Our results also demonstrate that using the single-site seismic method can provide new constraints on the fine structure and site responses of the fault zone, which are important for seismic hazard assessment.

Cenozoic sedimentary archives of a strike-slip fault zone in the Tanhai Region, Bohai Bay Basin, Northeastern China

The Changdi fault, also known as the Changdi fault zone, is commonly proposed to be a branch of the Tan-Lu fault zone in the Tanhai region of the Bohai Bay Basin. Using three-dimensional seismic data, borehole data, isopach maps, and RMS maps, we attempted to provide a comprehensive understanding of the structural properties and sediment dispersal patterns occurring within the Changdi area from a source-to-sink perspective. Two distinct geomorphological factors were identified in the Changdi area and four types of strike-slip fault-controlled alluvial channels were proposed for the first time. Additionally, three types of sediment dispersal systems, characterized by various sediment infillings, source inputs, and source areas, were reported. The spatial and temporal variations in the geometry and kinematics of the Changdi fault zone were observed to regulate sediment dispersal within the subsag. Sediment dispersal systems in the Changdi area were regulated by sediment dispersal associated with faults resulting from strike-slip movement. The movement of the input port in the provenance area was controlled by strike-slip movements. The movement of the sedimentary center indicated that there was a dextral strike-slip distance of 3.24 km during the E2s3L period. This study suggests that dextral strike-slip movements occurred in the Changdi fault zone, forming a strike-slip fault-controlled basin. The findings of this study may prove useful in developing models to predict the patterns of sediment dispersal controlled by strike-slip faults as well as the location of areas rich in sand.

Fine Crust‐Mantle Structure of the Major Tectonic Boundaries Between the North China Craton and Central Asian Orogenic Belt Revealed From Rayleigh Wave Phase Velocities and Receiver Functions

AbstractThe Tanlu Fault Zone (TLFZ) and Chifeng‐Kaiyuan Fault (CKF) serve as tectonic boundaries between the North China Craton (NCC) and the Central Asian Orogenic Belt (CAOB). Clarifying the refined structure of these tectonic boundaries is crucial for understanding the relationships between the tectonic units and the heterogeneity in the destruction of the NCC. In this study, two linear seismic arrays were deployed across these tectonic boundaries. Based on the phase velocity dispersion and receiver functions extracted from the seismic arrays, the Hamiltonian Monte Carlo algorithm was employed for the joint inversion of the S‐wave velocity (Vs) in the crust and uppermost mantle. The Vs model was then used to correct the time differences in common conversion point (CCP) stacking. The CCP stacking results indicate that the boundary faults TLFZ and CKF are both whole‐crustal faults that separate the NCC and CAOB. The Vs structure showed a significant low‐velocity anomaly in the mantle beneath the NCC, with intense seismic activity within the crust. This suggests that the NCC was affected by the subduction of the Western Pacific, leading to crustal and mantle destruction. In contrast, the CAOB exhibited a clear high‐velocity anomaly with relatively stable crustal structures. We believe that the NCC and CAOB have undergone structural modification and destruction due to the closure of the Paleo‐Asian Ocean and the activities of the TLFZ since the Late Mesozoic. During the Cenozoic, the region east of the TLFZ experienced more significant destruction in the NCC than the other adjacent tectonic units.

Influence of extensional strike-slip fault systems on hydrocarbon accumulation: case studies from Huanghekoudong and Miaoxi’nan sub-sags

Extensional strike-slip basins have unique structural features that influence both sub-sags and traps. Despite previous investigations into the extension-strike-slip fault system, there remains a gap in the comprehensive analysis of its influence on sub-sag formation and trap development. The Huanghekoudong and Miaoxi’nan sub-sags within the Bohai Bay Basin, intersected by the Tan-Lu Fault Zone, offer exemplary cases for examining the interplay between strike-slip and extensional tectonic regimes. The neotectonic strike-slip movements along the Tan-Lu Fault Zone have given rise to various extensional strike-slip overlap zones in these sub-sags, rendering these locales ideal for investigating the dynamics of strike-slip and extensional tectonic processes. Employing three-dimensional seismic data, well logs, and a newly constructed sequence stratigraphic framework, our research delineates the geometric and kinematic phenomena characteristic of the extensional strike-slip fault system, including the dynamics of extensional fault deformation and interaction through time. By scrutinizing the fault system’s vital role in shaping sub-sag evolution and trap genesis, we present a comprehensive model that significantly contributes to our understanding of structural trapping dynamics. This model not only fine-tunes existing trapping models but also offers invaluable insights for future exploration strategies within the Bohai Bay Basin and other similar extensional strike-slip basins worldwide. Our findings highlight the novel and significant implications of the extensional strike-slip fault system in controlling sub-sag and trap features, thus bridging a notable gap in existing geotechnical knowledge.

Uppermost mantle structure and dynamics of the Tanlu fault zone: New insights from Pn anisotropic tomography

Whether the segmentation of the Tanlu fault zone and mechanism of strong crustal earthquakes are related to the uppermost-mantle structure is still unclear. Here a new high-resolution uppermost-mantle velocity and anisotropy model of the Tanlu fault zone and surrounding areas is determined by using 13,045 Pn arrival-time data. These data are handpicked from seismograms recorded at 120 newly deployed TanluArray portable seismic stations and 337 Chinese provincial seismic stations. The pattern of Pn velocity and anisotropy agrees well with the surface geological and tectonic features. Obvious low-velocity (low-V) anomalies are observed in tectonically active areas, such as the Taihang mountain orogenic belt, the eastern Dabie mountain orogenic belt, and the Sulu fold belt, whereas areas with stable tectonics, such as the North China Basin and the South Yellow Sea Basin, exhibit high-velocity (high-V) anomalies. The fast propagation directions (FPDs) of Pn waves in the study area exhibit a complex distribution, but the FPDs show a rotating feature around the margin of the South Yellow Sea Basin. The block feature of the high-V anomalies beneath the North China Basin and segmentation of the low-V anomalies along the Tanlu fault zone may be related to lithospheric delamination and thermal erosion caused by hot and wet upwelling flows in the big mantle wedge. The 1668 Tancheng earthquake (M8.5) occurred near a low-V anomaly, and recent moderate and strong earthquakes (M > 4.0) took place along the boundaries of the velocity anomalies. These results offer new perspectives on the mantle dynamics and mechanism of strong earthquakes in and around the Tanlu fault zone.

Strain partitioning dominated growth of strike-slip fault: Insight from the Tan-Lu fault in Eastern China

The dynamic variations of the strain field and associated tectonic deformation during fault evolution can provide useful insights into the fault growth mechanisms. As one of the longest strike-slip fault system in the world, the ∼3000-km length Tan–Lu fault zone (TLFZ) in eastern China, is ideal for studying the mechanisms of fault propagation and linkage. This study investigated the Cenozoic Liaodong Bay subbasin, which hosts main structures of four faults in the central TLFZ, using structural analysis and strain calculations based on abundant seismic data. Our new results reveal three stages of fault growth (D1, D2, and D3) during the Cenozoic. Strain partitioning occurred during D1, with non-coaxial deformation within the high-strain regions leading to the growth of individual fault segments. D2 involved the redistribution of strain partitioning, with localized strain overlapping along fault tips to produce both left- and right-stepping fault sets. The locally increased simple-shear component favored the development of right-stepping fault arrays. Fault linkage appears to be achieved in two ways: 1) left-stepping, dextral faults were linked by folds dominated by pure shear along overlapping fault tips, and 2) fault segments were linked via fractures developed in simple-shear-dominated right-stepping overlap zones. D3 was characterized by the continued accumulation of simple shear, which resulted in fault linkage through fractures and formed continuous faults with high strain. Therefore, we propose a tectonic model in which strain partitioning results in linkage of segmented faults along fault tips. This model takes into account the spatial and temporal variations in fault geometry and strain type during the growth of the strike-slip fault, provides theoretical support for the structural patterns observed in natural faults worldwide.

Interseismic slip distribution and locking characteristics of the mid-southern segment of the Tanlu fault zone

We employ the block negative dislocation model to invert the distribution of fault coupling and slip rate deficit on the different segments of the Tanlu (Tancheng-Lujiang) fault zone, according to the GPS horizontal velocity field from 1991 to 2007 (the first phase) and 2013 to 2018 (the second phase). By comparing the deformation characteristics results, we discuss the relationship between the deformation characteristics with the M earthquake in Japan. The results showed that the fault coupling rate of the northern section of Tancheng in the second phase reduced compared with that in the first phase. However, the results of the two phases showed that the northern section of Juxian still has a high coupling rate, a deep blocking depth, and a dextral compressive deficit, which is the enrapture section of the 1668 Tancheng earthquake. At the same time, the area strain results show that the strain rate of the central and eastern regions of the second phase is obviously enhanced compared with that of the first phase. The occurrence of the great earthquake in Japan has played a specific role in alleviating the strain accumulation in the middle and south sections of the Tanlu fault zone. The results of the maximum shear strain show that the shear strain in the middle section of the Tanlu fault zone in the second phase is weaker than that in the first phase, and the maximum shear strain in the southern section is stronger than that in the first phase. The fault coupling coefficient of the south Sihong to Jiashan section is high, and it is also the unruptured section of historical earthquakes. At the same time, small earthquakes in this area are not active and accumulate stress easily, so the future earthquake risk deserves attention.

Prolonged exhumation and preservation of the Yuku molybdenum ore field, East Qinling, China: Constraints from medium- to low-temperature thermochronology

Molybdenum (Mo) is an important globally strategic metal and mostly occurs as molybdenite (MoS2) in diverse Mo deposits. The Yuku ore field includes multiple porphyry-skarn Mo deposits and forms a significant world-class Mo cluster in the Qinling molybdenum belt, central China. Previous studies on the ore field were largely related to its genesis, and did not highlight the post-mineralization modifications that are important to formulate prospecting strategies. The exhumation and preservation processes of the ore field through multiple tectonic events also remain poorly understood. Here, we conducted multi-method apatite U-Pb, fission-track and (U-Th)/He and zircon (U-Th)/He medium- to low-temperature thermochronology and related thermal history modelling on granitoids from the ore-hosting Shibaogou and Yuku plutons in the Yuku ore field, and integrated published studies to unravel the post-mineralization exhumation and preservation of Mo deposits. The newly determined apatite U-Pb (158.3–104.9 Ma), zircon (U-Th)/He (158.2–115.0 Ma), apatite fission-track (90.8–63.1 Ma), and apatite (U-Th)/He (67.8–35.3 Ma) ages in this study document multiple cooling pulses during post-magma emplacement. The low-temperature thermochronological ages of 158.2–35.3 Ma also record the post-mineralization cooling and exhumation history. The thermal history modelling indicates an Early Cretaceous (132–125 Ma) rapid cooling pulse, two enhanced (or accelerated) cooling pulses at ca. 125–59 Ma and post-10 Ma, together with a slow cooling or reheating pulse at ca. 59–10 Ma in the Yuku ore field. The Early Cretaceous rapid cooling is related to the coeval collisional tectonics of the East Qinling Orogen. The enhanced cooling at ca. 125–59 Ma is triggered by the post-collisional assembly of the North China and Yangtze Blocks, the subduction of Paleo-Pacific Plate, and the sinistral strike-slip motion of the nearby Tan-Lu Fault Zone. The slow cooling during ca. 59–10 Ma and the post-10 Ma enhanced cooling are correlated with the extensional tectonics derived by the subduction of Pacific Plate and the far-field effects from India-Eurasia collision. The Yuku area underwent lower exhumation in comparison to the nearby Shibaoguo and Huangbeiling areas in the Yuku ore field, which thus is helpful to the preservation of Mo deposits. The un-exhumated areas within 1.0 km at the inner and outer contact zones between the Yuku pluton and its wall rocks are postulated to be favorable sites for Mo prospecting. In addition, the un-exhumated areas surrounding other Late Mesozoic plutons in the Luanchuan region are also suggested to have high potential for Mo exploration.

Fault-scale crustal structure across the Dunhua-Mishan fault (Tanlu northern segment) constrained from teleseismic P-wave receiver functions

The Dunhua-Mishan fault, located in the northern segment of the Tanlu fault zone, experienced multiple tectonic processes associated with the effects of the Pacific Plate subduction and the Indo-Asia collision. The high-resolution fault-scale structure is critical for understanding the fault evolution and potential fault damage. However, the well-defined deep structure of the Dunhua-Mishan fault is still unclear due to the lack of the dense seismic array. In this study, we construct a high-resolution P-wave receiver function imaging based on linear dense seismic array across the fault. Our results reveal the strong Moho depth variation across the Dunhua-Mishan fault zone. The slightly higher Vp/Vs ratio values within the fault zone indicate the presence of a small amount of mafic crust composition. Interestingly, the significant double positive Ps converted phases are observed within the fault zone, which may represent double Moho discontinuities. The double Moho structure may be related to multiple significant tectonic activities in the Tanlu northern segment. These newly observed structures provide new seismic constraints on the formation and evolution of the Tanlu fault zone and probably reflect that the lithospheric structure of the Dunhua-Mishan fault has been modified by a series of tectonic processes.

Crustal deformation in the vicinity of the Tan-Lu Fault Zone in East China constrained by receiver function analyses

To investigate the spatial distribution of crustal deformation and related geodynamic processes associated with the Tan-Lu Fault Zone (TLFZ) in East China, we measured crustal anisotropy based on the sinusoidal moveout of the P-to-S conversions from the Moho observed on receiver functions. Totally 142 well-defined crustal anisotropy measurements were obtained from the China National Seismic Network and other broadband dense seismic stations, including three stations exhibiting the pattern of a double layered anisotropy structure. The fast orientations observed at stations in the vicinity of the TLFZ were dominantly fault-parallel except for the southernmost part of the study area, where the fast orientations were approximately normal to the strike of the fault zone and may primarily be attributed to the NW-SE oriented Dabie Orogenic Belt. In the North China Block, NW-SE fast orientations were found to be consistent with the dominant orientation of the secondary faults. The Lower Yangtze Block showed two dominant fast orientations. The fault-parallel measurements in the west of the Jiangshao Fault Zone were controlled by the NE-trending faults in the Lower Yangtze Block, while the fast orientations in the east and south of the Jiangshao Fault Zone were dominantly E-W, which could be mainly influenced by the regional principal compressive stress. The average delay time of the entire study area was 0.27 ± 0.07 s. In the vicinity of the TLFZ where fault-parallel fast orientations were observed, an approximately 44% increase in delay time was observed, suggesting a well-developed fault zone.

Petrogenesis of Late Mesozoic trachydacites in the Jiaolai Basin, Eastern China: Implications for the destruction of the North China Craton

The North China Craton has witnessed a large-scale lithospheric thinning event in the Mesozoic. The volcanic rocks of the Qingshan Group formed during the destruction of the North China Craton, therefore retaining important information to the deep processes in this region. Zircon U-Pb dating and geochemical analyses have been carried out on volcanic rocks of the Qingshan Group collected from southeastern margin of the Jiaolai Basin. In combination with previously published data on the volcanic rocks of the Qingshan Group, the newly acquired data show that: (1) the volcanic rocks of Qingshan Group in Mashan have SiO2 content of 62.82 ∼ 66.3 wt% and total alkali content (K2O + Na2O) of 7.64 ∼ 9.34 wt%. According to TAS diagram, they belong to trachydacite which experienced strong fractionation between LREEs and HREEs with depletion of HFSEs and enrichment of LILEs. (2) The crystallization age of trachydacite in Mashan is 116.4 ± 2.3 Ma (MSWD = 1.9, n = 9). The magma originated from the partial melting of the ancient lower crust and the enriched lithospheric mantle metasomatized by the fluids/melts released from the subducted slab of the Yangtze Craton. (3) The formation age of magmatic rocks in western Shandong is generally earlier than that in eastern Shandong, while the lower crust delamination in western Shandong preceded that in eastern Shandong. The occurrence of magmatism in eastern Shandong is probably attributed to the delamination process in western Shandong as well as the ongoing tectonic activities along the Tan-Lu fault zone. The lithospheric thinning of the North China Craton was mainly controlled by the change of the subduction angle of the Paleo-Pacific plate, and is probably influenced by the continuous activity of the Tan-Lu fault zone in eastern Shandong.

Sequence Stratigraphic Analysis of the Volcanic Rock–Evaporite–Clastic Rock Symbiotic Zone in the Fourth Member of the Shahejie Formation in the South of Laizhou Bay

Laizhou Bay Sag is a typical continental rift lake basin, which is affected by strike–slip activity, salt rock activity, volcanic activity, and paleoclimate change in the Tanlu fault zone, where three major lithologies—volcanic rock, clastic rock, and evaporite—mainly develop. In order to determine the sequence correspondence between the different lithologies in the study area based on drilling, logging data, and seismic data, it is determined that the fourth member of the Shahejie Formation in the southern Laizhou Bay mainly develops three types of sequences: clastic rock type sequences, salt lake type sequences, and volcanic rock/clastic rock type sequences. Two second-order sequence boundaries (SBs3L, SBs4L) and one third-order sequence boundary (SBs4U) were identified, and the principle of three divisions of system tracts (LST, TST, HST) and sedimentary processes in different types of sequences were determined by analyzing the stacking patterns of different sequences. Compared with the previous research results, this study provides a more detailed analysis of the sequence boundary definition of different blocks and different lithologic strata, and it improves the previous general sequence stratigraphic division method. Based on the study of distinct types of sequences, a unified stratigraphic framework is established in the whole zone, and the stratum thickness distribution of the fourth member of Shahejie Formation is smaller in the southwest and larger in the northeast. The study area is generally filled with pyroclastic rocks–evaporite–clastic rocks, changing from fan delta–saline lake filling to braided river delta–freshwater lake–fan delta filling from bottom to top. A sequence stratigraphic model for the comparison of steep slope–gentle slope differences is established to provide guidance for future oil and gas field exploration and development.

ЗАКОНОМЕРНОСТИ СТРОЕНИЯ И ГАЗОНОСНОСТИ ГРАБЕНОВ ИЛАНЬ-ИТУНСКОЙ ВЕТВИ ТАН-ЛУ НА ПРИМЕРЕ ФАНЖЕН-БИРОФЕЛЬДСКОГО ЗВЕНА

The regularities of the structure and gas content of the Yilan-Itong segment of the Tan-Lu Fault Zone are considered on the example of grabens of the Fangzheng – Birofeld link. Their structure has a lot in common, since they were formed in a single geodynamic environment. However, each structure has its own individual characteristics.