Tamm Plasmon Polaritons Research Articles

Ultrahigh-Sensitivity and Low-Thickness THz Refractive Index Sensor Based on Excitation of Tamm Plasmon Polaritons and Exploiting Fabry–Perot Resonances

Ultrahigh-Sensitivity and Low-Thickness THz Refractive Index Sensor Based on Excitation of Tamm Plasmon Polaritons and Exploiting Fabry–Perot Resonances

Dual-Phase Singularity at a Single Incident Angle with Spectral Tunability in Tamm Cavities.

The phase singularity, a sudden phase change occurring at the reflection zero is widely explored using various nanophotonic systems such as metamaterials and thin film cavities. Typically, these systems exhibit a single reflection zero with a phase singularity at a specific incident angle, particularly at larger angles of incidence (>50 degrees). However, achieving multiple phase singularities at a single incident angle remains a formidable challenge. Here, the existence of a dual-phase singularity is experimentally demonstrated at a lower incident angle using a tunable Tamm plasmon polariton (TPP) cavity that consists of gold-coated ultralow-loss phase change material Sb2S3-based distributed Bragg reflector. It can excite narrowband TPP resonances from normal incidence to a wide angle of incidence for both s- and p-polarizations of light. Notably, this TPP cavity shows dual-phase singularity at lower angles of incidence since the excited TPP for s- and p-polarizations exhibits zero reflection at slightly different wavelengths for the same incident angle. A TPP cavity-based scalable hydrogen sensor is proposed and shows that the dual-phase singularity can further improve the sensitivity of singular phase-based sensing approaches. Moreover, spectrally tunable dual-phase singularity is experimentally demonstrated at a lower incident angle using a metal-free Tamm cavity.

Dynamic light manipulation by geometric phase metasurface incorporated to Tamm plasmon polariton structure

Dynamic light manipulation by geometric phase metasurface incorporated to Tamm plasmon polariton structure

Ultra-low-thickness, highly sensitive, and perfect-absorption THz refractive index and temperature sensors based on Tamm plasmon polaritons and Fabry-Perot resonators

In this paper, an ultra-low thickness with high sensitivity and perfect absorption based on the excitation of Tamm plasmon polaritons and Fabry-Perot resonance for sensing applications is presented. The sensor comprises a graphene sheet, a spacer layer, an analyte region, and a one-dimensional periodic stack of the dielectric and metal layers. The sensor’s performance is evaluated using the transfer matrix method under different conditions, including the presence of the graphene sheet and metallic layers of the periodic stack, a change in the chemical potential of the graphene sheet, the thickness of the layers, as well as the incident polarization and angle. The simulation results show that the presence of the graphene sheet causes stimulation of Tamm plasmon polaritons, and the presence of metal layers simultaneously increases the absorption and decreases the thickness of the sensor. The sensitivity of the sensor is 0.9667 THz/RIU (equivalent to 305 μm/RIU) with an absorption peak of 99.99 %. The use of silicon as the analyte allows the proposed structure to perform as a temperature sensor in the range of 1 THz, which results in a temperature sensitivity of 0.055 THz/°C (equivalent to 16.45 nm/°C). The proposed sensor has the advantages of extremely thin thickness, perfect absorption, high sensitivity, tunability, and fabrication-friendly structure. The proposed sensor has high potential for use in various sensing applications.

Perfect-absorption, High-sensitivity, and Low-thickness THz Gas Sensor Based on Tamm Plasmon Polaritons

Perfect-absorption, High-sensitivity, and Low-thickness THz Gas Sensor Based on Tamm Plasmon Polaritons

Optical Biosensor Based on Porous Silicon and Tamm Plasmon Polariton for Detection of CagA Antigen of Helicobacter pylori.

Helicobacter pylori (H. pylori) is a common pathogen with a high prevalence of infection in human populations. The diagnosis of H. pylori infection is critical for its treatment, eradication, and prognosis. Biosensors have been demonstrated to be powerful for the rapid onsite detection of pathogens, particularly for point-of-care test (POCT) scenarios. In this work, we propose a novel optical biosensor, based on nanomaterial porous silicon (PSi) and photonic surface state Tamm Plasmon Polariton (TPP), for the detection of cytotoxin-associated antigen A (CagA) of H. pylori bacterium. We fabricated the PSi TPP biosensor, analyzed its optical characteristics, and demonstrated through experiments, with the sensing of the CagA antigen, that the TPP biosensor has a sensitivity of 100 pm/(ng/mL), a limit of detection of 0.05 ng/mL, and specificity in terms of positive-to-negative ratio that is greater than six. From these performance factors, it can be concluded that the TPP biosensor can serve as an effective tool for the diagnosis of H. pylori infection, either in analytical labs or in POCT applications.

Hybrid one-dimensional photonic crystals containing anisotropic metamaterials: Angle-driven photonic band gaps and angle-driven Tamm plasmon polaritons

Hybrid one-dimensional photonic crystals containing anisotropic metamaterials: Angle-driven photonic band gaps and angle-driven Tamm plasmon polaritons

Suppressing the radiation loss by hybrid Tamm-surface plasmon BIC modes

Tamm plasmon polaritons (TPPs), localized near the boundary of a dielectric Bragg reflector (DBR) and a thin metal film, have attracted much attention for the lower ohm loss and flexible excitation. However, the radiation loss resulting from the direct coupling to the surroundings hinders their applications. Here, we propose and experimentally demonstrate a new type of hybrid plasmonic quasi-bound state in the continuum (BIC) in a Tamm-surface plasmon polariton system to suppress the radiation loss. Leveraging the scattering of the periodic metal array, the TPP interacts with the surface plasmon polariton (SPP) mode and form a Friedrich-Wintgen type quasi-BIC state that originated from the interference of two surface waves with different natures. Through angle resolved reflectance spectrum measurement, the hybrid plasmonic quasi-BIC was observed in the experiment. Our work proposes a new method to design a high Q mode in plasmonic systems, and thus holds promise for applications in the field of light matter interactions.

Numerical Simulation of Optical Fiber Tamm Plasmon Polariton Sensor Based on D-Shaped Hollow-Core Photonic Crystal Fiber Coated With a Gold Film

Numerical Simulation of Optical Fiber Tamm Plasmon Polariton Sensor Based on D-Shaped Hollow-Core Photonic Crystal Fiber Coated With a Gold Film

A Comparative Study of Surface Plasmon and Tamm Plasmon Polaritons for Hydrogen Sensing

Due to the exponential increase in energy consumption and CO2 emissions, new sustainable energy sources have emerged, and hydrogen (H2) is one of them. Despite all the advantages, H2 has high flammability, so constant monitoring is essential. Two optical techniques were numerically studied and compared with the goal of H2 sensing: surface plasmon polaritons (SPP) and Tamm plasmon polaritons (TPP). The H2-sensitive material used was palladium (Pd) in both techniques. The SPP structure was found to have more sensitivity to H2 than TPP, 23 and 5nm/4vol% H2, respectively. However, the latter has lower FWHM, with the minimum of the band showing reflectivity near 0%. In addition, TPP also uses more costeffective materials and can be interrogated at normal incidence with depolarized light. The potential of using each of these optical techniques for H2 sensing was demonstrated.

Transmission enhancement effect of distributed Bragg reflector structure covered with metal grating

In order to observe the extraordinary optical transmission (EOT) through a metal gratings, induced by Tamm plasmon polaritons (TPPs), a layered structure consisting of a distributed Bragg reflector covered with a one-dimensional metal grating is proposed in this work. When an incident light wave passes through DBR regime and impinges on the DBR-metal interface normally, the generation of TPPs and the resulting highly localized energy on the metal-DBR interface are simulated in detail by the finite element method. As a result, the surface plasmon polariton (SPPs) modes accommodated inside the slits of metal gratings can be excited more effectively by the enhanced electromagnetic field associated with TPPs located on the interface. Furthermore, the enhanced transmission of incident light waves in the structure can be achieved when the SPP mode inside the grating slits satisfies the Fabry-Perot (FP)-like resonance condition, which reveals that the EOT in this structure comes from a TPPs-FP hybrid resonance. This inference can be confirmed by the relationships between the central wavelength and the grating height for the two transmission peaks, and the magnetic field modal profiles associated with the two peaks. Quantitative effects of the slit width and duty cycle on the transmission peak of the metal grating are analyzed numerically, and the results demonstrate that when the period is determined, as the slits width increases, the two peak transmittances first increase and then decrease. On the other hand, when the slit widths are chosen to be 40 nm, 50 nm, and 60 nm respectively, the peak transmittance first increases and then decreases with the duty cycle increasing. Meanwhile, it is found that the center wavelengths of the transmission peaks are related to the duty cycle in a nearly linear manner for three slit widths, which can be used to flexibly adjust the center wavelength of extraordinary optical transmission.

Tamm plasmon polariton-based planar hot-electron photodetector for the near-infrared region.

Light-trapping devices have always been a topic of intense interest among researchers. One such device that has gained attention is the hot-electron photodetector with a tunable detection wavelength. Photodetectors based on plasmon nanostructures that provide excitation of surface plasmon polaritons are challenging to manufacture. To address this issue, a planar hot-electron photodetector based on a Tamm plasmon polariton localized in a metal-semiconductor-multilayer mirror structure has been proposed in this study. The parameters and materials of the structure were adjusted to ensure perfect absorption at the resonance wavelength. As a result, the photoresponsivity of the proposed device can reach 42.6 mA W-1 at 905 nm. For the first time, the photosensitivity was calculated analytically by solving the dispersion law for the Tamm plasmon polariton.

Reflective nonlinear optical limiter design based on coupled Tamm plasmon polaritons and optical Kerr effect

With the increasing applications of high-power lasers in fields such as laser fabrication, laser measurement, laser therapy and scientific research, there is an increasing demand for high-performance nonlinear optical limiters (NOLs) to protect human eyes and optical sensitive elements. Here we propose a brand-new approach to design a reflective NOL with an ultra-wide stop band based on coupled Tamm plasmon polaritons (TPPs) and optical Kerr effect. The NOL permits the transmission of weak signal light at the desired wavelength while effectively blocking potentially harmful or accidentally intense lasers at the same wavelength to avoid damage to sensitive optical elements or human eyes. The design can be optimized for the desired operating wavelength and threshold intensity by using different dielectric layers. In a proof-of-concept design, taking the 1064 nm laser as an example, we design a NOL capable of dynamically adjusting its transmission in response to laser intensity. The NOL has a high transmission of 85.21 % at weak light (intensity less than 0.20 MW/cm2), and the transmission can be rapidly reduced to 1.39 % when the incident light intensity increases to 60.37 MW/cm2. Furthermore, the broad stop band effectively safeguards the limiter from potential damage caused by intense light at different wavelengths. Our proposed limiter exhibits an exceptionally wide stop band range spanning from 0.5 ∼ 20 µm, nearly 30 times broader than conventional reflective NOLs. The proposed NOL design scheme provides a new promising method to design an excellent reflective NOL at the desired wavelength.

Atomic Layer Deposition for Tailoring Tamm Plasmon-Polariton with Ultra-High Accuracy

In this study, we demonstrate the potential capability to control Tamm plasmon-polaritons (TPP) by applying atomic layer deposition (ALD) as a highly precise technique for plasmonic applications. Applications in plasmonics usually require tens of nanometers or less thick layers; thus, ALD is a very suitable technique with monolayer-by-monolayer growth of angstrom resolution. Spectroscopic ellipsometry and polarized reflection intensity identified the TPP resonances in the photonic band gap (PBG) formed by periodically alternating silicon oxide and tantalum oxide layers. The sub-nanometer control of the Al2O3 layer by ALD allows precise tailoring of TPP resonances within a few nanometers of spectral shift. The employing of the ALD method for the fabrication of thin layers with sub-nanometer thickness accuracy in more complex structures proves to be a versatile platform for practical applications where tunable plasmonic resonances of high quality are required.

Tuning Q-Factor and Perfect Absorption Using Coupled Tamm States on Polarization-Preserving Metasurface

The circular polarization of light flips its handedness after a conventional metallic mirror reflection. Therefore, a polarization-preserving metasurface is a crucially important element in a series of chiral photonic structures. They include tunable cholesteric LCs and anisotropic photonic crystals. Chiral structures are rich in interfacial localized modes including Tamm states. In this report, coupled modes formed as a result of the interaction between two chiral optical Tamm states or a chiral optical Tamm state and a chiral Tamm plasmon polariton are analytically and numerically investigated. It is shown that the effective control of coupled modes can be carried out by changing the pitch of the cholesteric and the angle between the optical axis of the cholesteric and the polarization-preserving anisotropic mirror. The influence of the metasurface period on the spectral characteristics of coupled modes is investigated. The possibility of realizing a bound state in the continuum of the Friedrich–Wintgen type, resulting from the destructive interference of coupled modes, which leads to the collapse of the resonance line corresponding to the chiral optical Tamm state, has been demonstrated.

Tamm Plasmon Polariton Biosensors Based on Porous Silicon: Design, Validation and Analysis.

Tamm Plasmon Polariton (TPP) is a nanophotonic phenomenon that has attracted much attention due to its spatial strong field confinement, ease of mode excitation, and polarization independence. TPP has applications in sensing, storage, lasing, perfect absorber, solar cell, nonlinear optics, and many others. In this work, we demonstrate a biosensing platform based on TPP resonant mode. Both theoretical analyses based on the transfer matrix method and experimental validation through nonspecific detection of liquids of different refractive indices and specific detection of SARS-CoV-2 nucleocapsid protein (N-protein) are presented. Results show that the TPP biosensor has high sensitivity and good specificity. For N-protein detection, the sensitivity can be up to 1.5 nm/(µg/mL), and the limit of detection can reach down to 7 ng/mL with a spectrometer of 0.01 nm resolution in wavelength shift. Both nonspecific detection of R.I. liquids and specific detection of N-protein have been simulated and compared with experimental results to demonstrate consistency. This work paves the way for design, optimization, fabrication, characterization, and performance analysis of TPP based biosensors.

High-performance narrowband thermal emitter based on aperiodic Tamm plasmon structures assisted by inverse design

Controlling the bandwidth and directionality of thermal emission is important for a broad range of applications, from imaging and sensing to energy harvesting. Here, we propose a new, to the best of our knowledge, type of long-wavelength infrared narrowband thermal emitter that is basically composed of aperiodic Tamm plasmon polariton structures. Compared to the thermal emitter based on periodic structures, more parameters need to be considered. An inverse design algorithm instead of traditional forward methodologies is employed to do the geometric parameter optimization. Both theoretical and experimental results show that the thermal emitter exhibits a narrowband thermal emission peak at the wavelength of 8.6 µm in the normal direction. The angular response of emission properties of the thermal emitter is dependent on the emission angle. We believe that our proposed thermal emitter provides an alternative for low-cost, high-effective narrowband mid-infrared light sources and would have a great potential in many applications.

Tunable Tamm plasmon cavity as a scalable biosensing platform for surface enhanced resonance Raman spectroscopy

Surface enhanced Resonance Raman spectroscopy (SERRS) is a powerful technique for enhancing Raman spectra by matching the laser excitation wavelength with the plasmonic resonance and the absorption peak of biomolecules. Here, we propose a tunable Tamm plasmon polariton (TPP) cavity based on a metal on distributed Bragg reflector (DBR) as a scalable sensing platform for SERRS. We develop a gold film-coated ultralow-loss phase change material (Sb2S3) based DBR, which exhibits continuously tunable TPP resonances in the optical wavelengths. We demonstrate SERRS by matching the TPP resonance with the absorption peak of the chromophore molecule at 785 nm wavelength. We use this platform to detect cardiac Troponin I protein (cTnI), a biomarker for early diagnosis of cardiovascular disease, achieving a detection limit of 380 fM. This scalable substrate shows great promise as a next-generation tunable biosensing platform for detecting disease biomarkers in body fluids for routine real-time clinical diagnosis.

Tuning strong coupling towards the deep ultraviolet region realized through Tamm-plasmon exciton-polaritons

Light-matter interactions at the nanoscale have attracted considerable attention due to its features of high optical-field confinement and large electromagnetic-field enhancement. Herein, we theoretically demonstrate strong coupling between Tamm plasmon (TP) and exciton polaritons towards the deep ultraviolet (DUV) region in metal Al/distributed Bragg reflector (DBR)-molecular structures. By adjusting the thickness of the spacer layer and the angle of incident light, the obvious anti-crossing phenomena can be observed with a Rabi splitting of 38.4 meV. Moreover, through varying the period number of the DBR structure, the coupling strength can be effectively manipulated from weak to strong. These findings may extend the operating wavelength of strong coupling to the DUV region, and benefit the development of new-style optical filters.

Exploring the potential of broadband Tamm plasmon resonance for enhanced photodetection.

Tamm plasmon polaritons (TPPs) have emerged as a promising platform for photodetector applications due to their strong light-matter interaction and potential for efficient light absorption. In this work, a design for a broadband photodetector (PD) based on the optical Tamm plasmon (OTS) state generated in a periodic metal-semiconductor-distributed Bragg reflector (DBR) geometry is proposed. The transfer matrix method (TMM) was used to study the propagation of electromagnetic waves through the proposed structure. By exciting the structure with incident light and analyzing the electric field profile within the multilayer structure at the resonant wavelength, we observe a distinctive electric field distribution that indicates the presence of Tamm plasmon modes. A comparative study was conducted to investigate the optical properties of a photodetector in the near-infrared (NIR) range by varying parameters such as thickness. By optimizing the thickness, we successfully achieved a broadband photoresponse in the photodetector, with a maximum responsivity of 21.8mA/W at a wavelength of 1354nm, which falls within the photonic bandgap region. FWHM was found to be 590nm for the responsivity spectrum. The geometry also presents maximum absorption with FWHM calculated to be about 871.5nm. The proposed geometry offers a broadband photoresponse, which is advantageous for the advancement of Tamm-based detector technologies. The ability to detect light over a wide operation range makes this mechanism highly beneficial for various applications.