Tailings Samples Research Articles

Hazard Study of Sludge from Mining Wastewater Treatment Systems (Tailings), Accumulation of Contaminants and Potential Utilization Proposals

The increase in gold mining activities has led to a substantial rise in tailings generation, which carry distinct physicochemical and microbiological properties. This study aimed to evaluate the hazardous characteristics of mining tailings using the CRETIB (corrosivity, reactivity, explosiveness, toxicity, ignitability, biological-infectious) methodology. The research analyzed concentrations of heavy metals including arsenic, cadmium, copper, chromium, lead, mercury, nickel, and zinc, alongside parameters such as pH, cyanide, hydrogen sulfide, and coliform bacteria. Tailings samples were collected from a mine in Ponce Enriquez, Ecuador, at the surface and at a depth of 2 m across three monitoring campaigns. The results indicate that the tailings do not exhibit hazardous characteristics according to CRETIB criteria. While arsenic, chromium, copper, nickel, zinc, and mercury concentrations showed significant differences between the surface and 2 m depth, accumulating at the bottom of the tailings dam by 30–72%, parameters such as pH, cyanide, and hydrogen sulfide were higher at the surface, likely due to volatilization and precipitation effects. Lead did not show significant differences, but also tended to accumulate at depth. These findings suggest that the tailings could be safely utilized in the production of construction materials such as bricks, geopolymer concrete, and fiber cement, promoting circular economy practices and sustainable development in mining.

Assessment of Metal Enrichment in the Koma Bangou (Niger) Gold Panning Area Soils and Tailings

Artisanal and small-scale gold mining at Koma Bangou (Niger) has been going on since the Sahelian 1984’s drought, with introduction of ore leaching in the year 2009. The use of chemicals in the ore processing results in metal enrichment and pollution at the cyanidation sites. The aim of this work is to assess the metal enrichment of soils and tailings at Koma Bangou. Geochemical data acquired with portable XRF analyzer corrected with ICP-MS data, were used to assess the enrichment level of As, Cr, Cu, Mn, Pb and Zn in the soils and tailings samples using the enrichment factor and soil-geochemical baseline data for the Koma Bangou soils. The metallic enrichment generated by the ore processing was identified in the tailings (cyanidation and acidification waste) and the soils from the cyanidation areas. The perimeter soils (soils outside cyanidation sites) show no metal enrichment. Pb and As are extremely high to very high enriched in the cyanidation waste, with an average enrichment factor value of 44.96 and 34.96 respectively. Zn, Cu, Cr are extremely high to significant enriched in the acidification waste, with an average enrichment factor value of 793.35, 29.46 and 5.22 respectively. Mn enrichment is insignificant in all of the samples with an average enrichment factor value of 1.00 in the perimeter soils. The gold ore leaching activities generate metallic pollution of the soil, water and vegetation around the cyanidation sites.

From bias to balance: Leverage representation learning for bias-free MoCap solving

Motion Capture (MoCap) is still dominated by optical MoCap as it remains the gold standard. However, the raw captured data even from such systems suffer from high-frequency noise and errors sourced from ghost or occluded markers. To that end, a post-processing step is often required to clean up the data, which is typically a tedious and time-consuming process. Some studies tried to address these issues in a data-driven manner, leveraging the availability of MoCap data. However, there is a high-level data redundancy in such data, as the motion cycle is usually comprised of similar poses (e.g. standing still). Such redundancies affect the performance of those methods, especially in the rarer poses. In this work, we address the issue of long-tailed data distribution by leveraging representation learning. We introduce a novel technique for imbalanced regression that does not require additional data or labels. Our approach uses a Mahalanobis distance-based method for automatically identifying rare samples and properly reweighting them during training, while at the same time, we employ high-order interpolation algorithms to effectively sample the latent space of a Variational Autoencoder (VAE) to generate new tail samples. We prove that the proposed approach can significantly improve the results, especially in the tail samples, while at the same time is a model-agnostic method and can be applied across various architectures.

Mixed Mutual Transfer for Long-Tailed Image Classification.

Real-world datasets often follow a long-tailed distribution, where a few majority (head) classes contain a large number of samples, while many minority (tail) classes contain significantly fewer samples. This imbalance creates an information disparity between head and tail classes, which can negatively impact the performance of deep networks. Some transfer knowledge techniques attempt to mitigate this gap by generating additional minority samples, either through oversampling the tail classes or transferring knowledge from the head classes to the tail classes. However, these methods often restrict the diversity of the generated minority samples, primarily focusing on transferring information only to the tail classes. This paper introduces a simple yet effective method for long-tailed classification, called mixed mutual transfer (MMT), which facilitates the mutual transfer of knowledge between head and tail classes by blending samples. The core idea of our method is to create new samples by blending head and tail samples. Head samples are selected using a uniform sampler that retains the long-tailed distribution, while tail samples are selected using a differential sampler that reverses the long-tailed distribution to alleviate imbalance. Our approach aims to diversify both tail and head classes. During the training phase, we utilize the generated samples to update the original dataset for training deep networks. Mixed mutual transfer simultaneously enhances the performance of both head and tail classes. Experimental results on various class-imbalanced datasets show that the proposed method significantly outperforms existing methods, demonstrating its effectiveness in improving the performance of long-tailed deep networks.

Unbiased scene graph generation via head-tail cooperative network with self-supervised learning

Scene Graph Generation (SGG) as a critical task in image understanding, facing the challenge of head-biased prediction caused by the long-tail distribution of predicates. However, current debiased SGG methods can easily prioritize improving the prediction of tail predicates while ignoring the substantial sacrifice of head predicates, leading to a shift from head bias to tail bias. To address this issue, we propose a Head-Tail Cooperative network with self-supervised Learning (HTCL), which achieves unbiased SGG by cooperating head-prefer and tail-prefer predictions through learnable weight parameters. HTCL employs a tail-prefer feature encoder to re-represent predicate features by injecting self-supervised learning, which focuses on the intrinsic structure of features, into the supervised learning of SGG, constraining the representation of predicate features to enhance the distinguishability of tail samples. We demonstrate the effectiveness of our HTCL by applying it to VG150, Open Images V6 and GQA200 datasets. The results show that HTCL achieves higher mean Recall with a minimal sacrifice in Recall and achieves a new state-of-the-art overall performance. Our code is available at https://github.com/wanglei0618/HTCL.

Methylmercury Concentrations More Strongly Associated With Trait Variation Than Food Web Position in Plethodontid Salamanders.

Salamanders serve as bioindicators of mercury (Hg) in both terrestrial and aquatic habitats and are an important link in the food web between low-trophic prey and higher-trophic predators. We investigated the drivers of methylmercury (MeHg) exposure in three common plethodontid salamander species in New York State, USA, including comparisons among regions, habitat types (terrestrial and semiaquatic), and color morphs of Plethodon cinereus (striped and unstriped). Nonlethal tail samples were collected from one terrestrial species (P. cinereus) and two semiaquatic species (Eurycea bislineata and Desmognathus spp.) in the Adirondack Mountains (ADK) and the Finger Lakes National Forest (FLNF) regions. Samples were analyzed for MeHg and stable isotopes, including δ15N and δ13C which are proxies of trophic position and diet, respectively. Despite elevated biota Hg concentrations typically found in the ADK, salamander MeHg concentrations did not differ by region in the terrestrial species and one of the semiaquatic species. In addition, diet and trophic level did not explain MeHg exposure in salamanders. Semiaquatic salamanders exhibited higher MeHg concentrations than terrestrial salamanders in the FLNF only. Within species, only snout-vent length predicted MeHg concentrations in E. bislineata with few other variables significant as predictors of MeHg concentrations in path models. Among P. cinereus individuals in the FLNF, the striped morph had greater MeHg concentrations than the unstriped morph, and food web tracers were not different between morphs. Overall, New York State salamander Hg concentrations were elevated compared to other locations where these species are present. The present study establishes baseline Hg data in salamanders for future assessments of changes in Hg bioavailability to forests of New York State. Environ Toxicol Chem 2024;43:2045-2057. © 2024 SETAC.

On the Behavior of Bauxite Tailings under a Wide Range of Stresses

Despite its vital importance to the contemporary economy, some drawbacks are mainly associated with waste derived from mining activity. This waste consists of tailings that are hydraulically disposed of in large impoundments, the tailings dams. As the dams are enlarged to accommodate higher amounts of materials, the stress states at which the deposited tailings are submitted change. This may be a concern for the stability of such structures once the geotechnical behavior of this material may be complex and challenging to predict, considering the existing approaches. Thus, the present study concerns the mechanical response of bauxite tailings under a wide span of stresses, ranging from 25 kPa to 4000 kPa. One-dimensional compression tests and isotropically drained and undrained triaxial tests were carried out on intact and remolded samples of the bauxite tailings. The after-shearing grain size distribution was characterized via sedimentation analysis. The results have shown a stress-dependency of the critical state friction angle for the intact material, which may be related to fabric alterations derived from structure deterioration and particle breakage. Overall, this research provides valuable insights into the response of structured and de-structured bauxite tailings, which are helpful for future constitutive modeling of such material.

Comprehensive evaluation of leaching toxicity of tailings in non-resource-based cities in Anhui Province based on entropy weight-clustering method

<p>Toxic components in tailings pose a severe threat to the ecosystem and human health and negatively affect tailings’ resource utilization. Therefore, using the entropy weight-clustering method, we evaluated the leaching toxicity based on tailings samples from non-resource cities in Anhui Province. The results show that, all the extracted tailings samples first passed the leaching toxicity test, but there is still a large room for improvement. Secondly, there are complex interrelationships among the 15 indicators measuring leaching toxicity. Thirdly, in the process of entropy weight method calculation, the top three indicators in terms of weight are Cu (17.65%), Ag (16.52%), and Be (8.66%). Finally, the Ward clustering results show that the toxicity scores of tailings in each mining area exhibit distinct hierarchical characteristics, and they can be divided into two major categories and three subcategories (Ⅰ-1, Ⅰ-2, Ⅱ), with the toxicity scores of category Ⅰ-1 significantly higher than the rest of the mining areas. These findings provide empirical evidence for targeted treatment of tailings resources.</p>

Tellurium Enrichment in Copper Tailings: A Mineralogical and Processing Study

As the global demand for tellurium (Te) increases, it is crucial to develop efficient recovery methods that consider existing supply streams. This research combines gravity separation and froth flotation processes to enhance the recovery of Te minerals from tailings produced during the beneficiation of copper porphyry ores. Prior to processing, a systematic and comprehensive characterization study of copper tailing (CT) samples was conducted to examine the deportment of Te minerals in different mineral phases and to understand their locking and liberation behavior. Characterization techniques included inductively coupled plasma mass spectrometry (ICP-MS) and TESCAN’s integrated mineral analysis (TIMA). Copper tailing characterization showed that minerals with gold (Au), silver (Ag), bismuth (Bi), and Te were present in various forms, including native Au, electrum, tellurides, and sulfosalts. TIMA revealed that >90% of these minerals were primarily hosted in pyrite as less than 10 µm inclusions in the CT. TIMA also revealed that Te minerals exhibited fine-grained liberation of less than 20 μm. Moreover, TIMA results showed that >80% of mica and other silicate minerals were concentrated in size fractions < 38 μm, suggesting that desliming processes would positively impact Te enrichment. The results from the processing tests showed a Te recovery rate of ~77% and a Te enrichment ratio of 13 when using the combination of gravity separation and froth flotation at 90 g/t xanthate collector and 50 g/t glycol frother. The findings from this study show a significant potential for Te recovery from unconventional sources if appropriate physical beneficiation approaches are adopted.

Exploring the Coagulant Capability of Moringa oleifera seed powder at reducing Turbidity in Gold Mine Tailings Slurry

Moringa oleifera is characterised as an effective alternative to traditional approaches for the treatment of gold mine tailings spoils, particularly for its low cost, non-toxic nature, and simple application. This study investigated the use of M. oleifera seed powder as a primary coagulant for the treatment of gold mine tailings with respect to turbidity reduction, and the effect of varying pH on the coagulation process. The tailings sample used in the study was collected from an active mining operation in the Waiamu area, Cuyuni Mining District 4, Guyana; with the average turbidity ranging between 216.33 ± 4.62 and 275.33 ± 8.33 NTU. The standard jar test procedure was used to assess the efficiency of the M. oleifera coagulant based on measurements of turbidity reduction. M. oleifera was found to be an effective coagulant for reducing turbidity in the selected gold mine tailing pond, with the best turbidity reduction being 91.31 ± 0.53%. Further evidence from the study suggested that at the optimum coagulant concentration of 250mg/L, turbidity reduction changed as pH levels (5, 6, 7, 8, 9) were altered, whereby reduction at the natural pH level of 7 (control) was 91.31 ± 0.53%; and following adjustments of pH levels to 5, 6, 8 and 9, turbidity was reduced by 85.00 ± 0.58%, 84.88 ± 0.94%, 77.81 ± 5.21% and 74.16 ± 5.28% respectively. Therefore, strong knowledge of biological approaches for the treatment of gold mine tailings spoils would be pivotal to support long-term decisions on wastes management and disposal.

Characterization and utilization potential of typical molybdenum tailings in Shaanxi Province, China.

Shaanxi Province is located in the most important molybdenum ore district in the world, but a lot of molybdenum tailings have been released, polluting the environment and wasting resources seriously. Taking eleven tailing samples collected at the main molybdenum tailings ponds in Shaanxi Province as the research object, the physical, chemical, and mineralogical characteristics were studied through scanning electron microscope, X-ray fluorescence, X-ray diffraction, inductively coupled plasma mass spectrometer, and others. The ecological risk and utilization potential of molybdenum tailings were investigated through leaching test, geo-accumulation index, potential ecological risk assessment, and other methods. The results demonstrated that the main chemical and mineralogical composition of various molybdenum tailings in Shaanxi Province is similar, and the predominant mineral composition is muscovite, quartz, microcline, and calcite. The potential ecological risk of heavy metals in six molybdenum tailings is high, while Pb and Cd are the main pollution risk elements. Molybdenum tailings contain considerable amounts of critical minerals with huge potential economic value, and molybdenum tailings with high environmental hazards could be converted into a possible source for critical minerals by recovering the critical minerals and repurposing the secondary tailings as an additive or cement substitute. This study provides an innovative idea for the pollution treatment of molybdenum tailings and indicates the prospect of molybdenum tailings as a secondary source for critical minerals.

Characterization of medium and small-scale gold processing operations, wastewaters, and tailings in the Arequipa region of Peru

Gold cyanidation facilities in the Arequipa Region of Peru are challenged by the availability and quality of water for processing in an arid environment. The facilities reuse decant water which recycles residual cyanide but also undesirable constituents. To understand the impact of intensive water recycling on cyanide and metals concentrations, we collected barren water, decant water, and tailings samples from six gold cyanidation facilities with ore capacities of 10–430 tons per day. Processing facilities in Arequipa recycle all effluents, with decant waters making up 58 ± 11 % of process waters. Decant water contained non-target metals: copper (394 ± 161 mg/L), iron (59 ± 34 mg/L), and zinc (74 ± 42 mg/L). In addition, decant water mean free and complexed cyanide concentrations were 534 ± 129 mg/L and 805 ± 297 mg/L, respectively. Complexed cyanide concentrations remained more constant than free cyanide concentrations with 786 ± 299 mg/L for barren water and 805 ± 297 mg/L for decant water. Cyanide mass balances showed between 21 % and 42 % of unaccounted free cyanide from the start of gold cyanidation and discharge to the tailings storage facility (TSF). Free cyanide estimated losses due to volatilization were 0.8 kg and 2.5 kg of hydrogen cyanide per ton of ore processed at barren water pH of 10.1 and 9.7. Together these results indicate two acute hazards: 1) volatilization of free cyanide during processing and 2) loading and retention of cyanides and metals into TSFs. This study elucidates the extent of uncontrolled vapor phase cyanide release during gold processing operation and contaminant concentrations in the tailings storage facilities. The data highlights the need for improvement oversight, accountability, and regulation of gold processing facilities practicing intensive recycling and zero discharge.

Geochemical and mineralogical heterogeneity of the Cantung mine tailings: implications for remediation and reprocessing

Reprocessing tailings to recover minerals of economic interest and environmental concern can add value to a project and decrease environmental risk, but dealing with heterogeneity within tailings facilities is a challenge. This study investigates the heterogeneity of the Cantung Mine tailings to assess the potential for reprocessing for both value recovery and remediation purposes. The Cantung Mine, Northwest Territories, was a world-class tungsten (W) deposit that was mined periodically from 1962 to 2015. Geochemical analysis of 196 tailings samples shows substantial heterogeneity in the elements of value (tungsten and copper (Cu)) and elements of environmental concern for acid rock drainage (iron (Fe) and sulfur (S)). Tungsten and copper concentrations range from 0.06 to 1.06 wt% W (average 0.32 wt% W) and 0.05 to 0.48 wt% Cu (average 0.23 wt% Cu). Iron and sulfur concentrations range from 8.25 to 34.08 wt% Fe (average 17.14 wt% Fe) and 2.20 to 19.70 wt% S (average 6.7 wt% S). Characterization of 29 samples by scanning electron microscope with automated mineralogy software shows that geochemical heterogeneity corresponds to mineralogical heterogeneity with variability in the concentrations of scheelite (CaWO4), chalcopyrite (CuFeS2) and pyrrhotite (Fe(1-x)S). Liberation analyses indicate that additional grinding would be necessary to recover scheelite, chalcopyrite or pyrrhotite. Pyrrhotite with monoclinic and hexagonal-orthorhombic forms were identified. Overall, the Cantung tailings display considerable heterogeneity, which could lead to difficulties in reprocessing for economic or environmental benefit, but characterizing the heterogeneity allows for systems to be optimized.

Evaluation of the Efficiency of Using an Oxidizer in the Leaching Process of Gold-Containing Concentrate

This article presents the results of cyanide leaching of gold-containing concentrate using the trichlorocyanuric acid (TCCA) oxidizer. Gold-containing concentrate was obtained from a gold tailings sample from a gold recovery factory (GRF) in one of the deposits of Kazakhstan that have not previously been studied for concentrability. According to X-ray phase analysis and energy dispersive spectrometry (DSM) data, the main compounds in the tailings sample under study are pyrite FeS2, quartz SiO2, calcite CaCO3, albite NaAlSi3O8, muscovite KAl2Si3AlO10(OH)8, dolomite CaMg(CO3)2, and oxidized iron compounds. Microscopic studies of the concentrate have established the presence of ultrafine gold with sizes from Au 0.9 to 10.2 μm in pyrite. Obtaining the gold-containing concentrate with a gold content of 15.95 g/t is possible according to the enrichment scheme, which includes centrifugal separation, classification according to the fineness class −0.05 mm, additional grinding of hydrocyclone sands to a fineness of 90.0–95.0% of the class finer than 0.050 mm, and control centrifugal separation. Since pyrite in technogenic raw materials is the main gold-containing mineral, this paper presents studies on the oxidizability of pyrite with the TCCA oxidizer. The results of studies on the oxidation of pyrite using the TCCA oxidizer show the products of its hydrolysis oxidize pyrite with the formation of various iron compounds on its surface. Pretreatment of gold-containing concentrate with oxidizer TCCA for 3 h before the cyanidation process (20 h) allows for an increase in the recovery of gold in the solution by 5.8%.

Assessment of Mercury Contamination in Water and Soil from Informal Artisanal Gold Mining: Implications for Environmental and Human Health in Darmali Area, Sudan

Mercury contamination stemming from artisanal and small-scale gold mining (ASGM) operations poses significant environmental and health concerns. This study focuses on the Darmali area in River Nile State, Sudan, where the reprocessing of amalgamation tailings has led to mercury contamination. This study assessed the mercury content in soil and tailings samples, as well as in tap and groundwater, to evaluate the human health risks from ASGM activities and assess contamination levels within the study area. Soil and water samples were collected from various locations, including agricultural, residential, and tailings sites, as well as groundwater and tap water from the Nile. Mercury analysis was conducted using MA-3000 (NIC), and geo-accumulation index analysis revealed extreme pollution levels in areas with tailings and moderate pollution levels in agricultural and residential areas. Hazard quotients were applied to assess health risks, with inhalation of mercury vapor identified as the primary exposure route. The results indicated that tailings pose significant health risks, particularly for children, while water samples and soil from agricultural and residential areas did not pose significant risks. These findings underscore the urgent need for authorities and local communities to address mercury contamination by removing and treating tailings from affected areas to mitigate health risks.

Feeding Status Transiently Alters the Phosphorylation of Enzymes in the PI3K/Akt/GSK3β Pathway but not Phosphorylated Tau in the Cortex of Male Obese Zucker Rats

Metabolic syndrome (MetS) fosters pathological brain markers such as excess phosphorylated tau (ptau) to produce neuronal dysfunction. Activation of the PI3K/Akt/GSK3β pathway by increasing pAkt-Ser473 and pGSK3β-Tyr216 promotes phosphorylation of tau at residues such as Ser396. Insulin also increases pGSK3β-Ser9 to limit phosphorylation of tau. Deficient insulin signaling has been proposed to reduce pGSK3β-Ser9 and promote pathological excess ptau-Ser396. However, studies of these pathways in rodent models of MetS report both elevated and reduced expression of pAkt-Ser473 and pGSK3β-Ser9, raising the question of the predictive value and role of altered pGSK3β-Ser9 expression in producing excess ptau. Studies reporting reduced pGSK3β-Ser9 in insulin resistant and diabetic rodents often used fasted animals for tissue collection, but other studies without reported fasting showed increased pGSK3β-Ser9. However, elevated ptau was consistently observed under both conditions. Because short-term changes in insulin and glucose alter pAkt-Ser473 and pGSK3β-Ser9 expression, we hypothesized that phosphorylation was related to the feeding status at time of tissue collection rather than the chronic disease state, and excess ptau was resistant to these short-term changes. We examined whether fasting altered pAkt-Ser473, pGSK3β-Tyr216, and pGSK3β-Ser9, and ptau-Ser396 levels in 18-week-old male obese (OZR) and lean (LZR) Zucker rats. After measurement of blood glucose by tail sample in their home cage, fasted (16 hours) and non-fasted rats were euthanized for tissue collection. Though baseline glucose was higher in OZRs vs. LZRs in the fed state (202.4±21.9 vs. 115.9±2.7 mg/dl, t-test) and fasted state (169.4±5.8 vs. 95.3±3.8 mg/dl, t-test), fasting significantly reduced glucose in OZRs but not LZRs (2-way ANOVA with Tukey’s post hoc, P=0.023 for OZRs and P=0.143 for LZRs, n=5-8/group). Protein expression in the cerebral cortex was measured by Western blotting and normalized to actin (n=3-5 for all groups). Expression of ptau-Ser396/total tau was significantly elevated in OZRs vs. LZRs in both feeding conditions (p<0.001) and was not altered by fasting in either phenotype. Expression of pAkt-Ser476 was elevated in non-fasted OZRs vs. LZRs (p<0.001). Fasting greatly reduced pAkt-Ser476 in OZRs (p<0.001) but not LZRs (P=0.741), making expression in fasted OZRs and LZRs comparable (P=0.674). Expression of pGSK3β-Ser9 was significantly elevated in fed OZRs vs. LZRs (p<0.001). Fasting reduced expression of pGSK3β-Ser9 only in OZRs (p<0.001 in OZRs, P=0.952 in LZRs), but expression of was still elevated in fasted OZRs vs. LZRs (P=0.009). Expression of pGSK3β-Tyr216 was significantly elevated in fed OZRs vs. LZRs (p<0.001) but significantly lower in fasted OZRs vs. LZRs (p<0.001). These data show that feeding status does not alter the ptau-Ser396 in the cerebral cortex of OZRs vs. LZRs, but phosphorylation of the enzymes of the PI3K/Akt/GSK3β signaling pathway are greatly affected by MetS and feeding status at time of tissue collection. Thus, when OZRs have access to food, elevated pGSK3β-Tyr216 may contribute to the GSK3β-mediated rise in ptau-Ser396 despite elevated pGSK3β-Ser9. Supported by R01Hl132568S1, JES Edwards Foundation, and Summerfield G. Roberts Foundation. This is the full abstract presented at the American Physiology Summit 2024 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

Is the Zucker Diabetic Fat Rat an Appropriate Model of Diabetic Kidney Disease: A Discussion on Hydronephrosis

Introduction: Kidney disease is a significant concern for global healthcare, particularly in individuals with diabetes. Experimental research into the pathology of diabetes is dependent on the utilisation of appropriate animal models. The Zucker Diabetic Fat (ZDF) rat has a Leptin receptor deficiency and is a commonly used model of type 2 diabetes. Here, we examine the relevance of this model for the investigation of diabetic kidney disease, with a particular focus on vascular imaging. The Zucker Lean (ZL) rat is a non-diabetic strain of the same rat lineage and will be used as a control. Method: This dataset used the ZDF rat (n=13) and the Zucker Lean (ZL) rat (n=16). Individuals were scanned at ages of 12 weeks (ZDF n=4, ZL n=4), 22 weeks (ZDF n=4, ZL n=5), and 40 weeks (ZDF n=5, ZL n=7). During open laparotomy, rats were maintained on a respirator under general anaesthesia via isoflurane and blood pressure was monitored via a central catheter. During surgery, a blood glucose measurement was taken from the tail vein and samples of arterial blood and urine were collected. The contrast medium Microfil (MV122, Flow Tech Inc., Carver, MA) was injected post-mortem via the renal artery and excised kidneys were scanned for 11 hours in a ZEISS XRadia 410 Versa μCT scanner (Carl Zeiss Microscopy GmbH, Jena, Germany). Results: As expected, the ZDF rats developed significant hyperglycaemia from 12 weeks, significant increases in albumin creatinine ratio (ACR) from 22 weeks, and a significant decrease in glomerular filtration rate (GFR) from 40 weeks. Concurrent hydronephrosis affecting more than 10% of total kidney volume was detected in 51% of all rats (group prevalence rates were ZDF=69% and ZL=38%). The percent of the kidney mass affected by hydronephrosis was significantly higher in ZDF than ZL (ANOVA row factor p=0,029*). Age had no significant impact on the size of the hydronephrotic cavity. There was a significant correlation between the degree of hyperglycaemia and the size of the hydronephrotic cavity (mm) (r=0.57, p=0,0014**). ACR, GFR and urine excretion rate were unaffected by hydronephrosis. Hydronephrosis did not have a significant impact on vascular density in the remaining kidney tissue (p=0.53). Conclusion: The high prevalence of hydronephrosis development in the ZDF rat questions its appropriateness to model human diabetic kidney disease, as hydronephrosis is not commonly seen in diabetic patients. While vascular density was preserved in the remaining kidney tissue, the huge loss of vascular tissue caused by hydronephrotic erosion means this model is limited for all renal imaging applications. Both ZDF and ZL rats develop hydronephrosis suggesting this may be a genetic condition of their common lineage. However, the conditions' increased severity in the ZDF rat indicates that the deficit in the leptin receptor contributes to disease pathology. The significant relationship between hyperglycaemia and hydronephrosis size suggests the two conditions are interacting, raising questions about whether the underlying molecular mechanisms of this model of diabetic kidney disease have any relevance for translational research. Funded by European Research Council Synergy grant SURE, project no. 854796. This is the full abstract presented at the American Physiology Summit 2024 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

Investigation of leaching of nickel sulfide flotation tailings to recover valuable metals

The global transition towards renewable energy, driven by low-carbon theories and technologies, has resulted in an increasing surge in the demand for critical and unique elements, of which nickel (Ni) and copper (Cu) are encompassed. In this investigation, using acid leaching, the recovery of such elements from polymetallic tailings to supplement conventional extraction processes was studied. The effective leaching parameters were investigated and optimized to enhance the simultaneous recovery of Ni, Cu, cobalt (Co), chromium (Cr), and manganese (Mn) from the tailings sample. To this end, the response surface methodology (RSM) was employed, with sulfuric acid (H2SO4) concentration (0–20 g/L), ethylenediaminetetraacetic acid (EDTA) concentration (0–20 g/L), ferric chloride (FeCl3) concentration (0–20 g/L), leaching temperature (20–80 °C), and leaching time (4–12 h) as independent variables. The analysis of variance depicted that ferric chloride concentration was the most prominent process parameter for the recovery of Ni, Cu, Co, and Mn. The recovery of Cr was contingent to leaching temperature and sulfuric acid addition. Ensuing tests under the optimal conditions resulted in the recovery of 100.0 % Cu, 89.8 % Co, 42.1 % Cr, and 100.0 % Mn in addition to 93.7 % Ni. The kinetics was also studied using the shrinking-core model. Kinetic data indicates that the dissolution of Ni, Cu, Co, and Cr is governed by the chemically controlled model, while that of Mn by the diffusion control model. The activation energies as per the Arrhenius equation are estimated as 32.43, 36.78, 34.88, 24.02, and 29.18 kJ/mol for Ni, Cu, Co, Cr and Mn.

Occurrence and mobility of thiolated arsenic in legacy mine tailings

We studied the occurrence of dissolved thiolated Arsenic (As) in legacy tailings systems in Ontario and Nova Scotia, Canada, and used aqueous and mineralogical speciation analyses to assess its governing geochemical controls. Surface-accessible and inundated tailings in Cobalt, Ontario, contained ∼1 wt-% As mainly hosted in secondary arsenate minerals (erythrite, yukonite, and others) and traces of primary sulfide minerals (cobaltite, gersdorffite and others). Significant fractions of thiolated As (up to 5.9 % of total dissolved As) were detected in aqueous porewater and surface water samples from these sites, comprising mostly monothioarsenate, and smaller amounts of di- and tri-thioarsenates as well as methylated thioarsenates. Tailings at the Goldenville and Montague sites in Nova Scotia contained less (<0.5 wt-%) As, hosted mostly in arsenopyrite and As-bearing pyrite, than the Cobalt sites, but exhibited higher proportions of dissolved thiolated As (up to 17.3 % of total dissolved As, mostly mono- and di-thioarsenate and traces of tri-thioarsenate). Dissolved thiolated As was most abundant in sub-oxic porewaters and inundated tailings samples across the studied sites, and its concentrations were strongly related to the prevailing redox conditions and porewater hydrochemistry, and to a lesser extent, the As-bearing mineralogy. Our novel results demonstrate that thiolated As species play an important role in the cycling of As in mine waste systems and surrounding environments, and should be considered in mine waste management strategies for high-As sites.

Research on resource comprehensive utilization of granite-type sulfide mine tailings

In order to recover and utilize mica and quartz from the tailings of a granite-type sulfide ore in Jiangxi Province, the technique of separating mica and quartz from the tailings by flotation without acid was investigated. Pyrite flotation was performed on a 500 g tailing sample to remove pyrite. And the middlings were acquired by desliming of the unfloated products. Finally mica and quartz was separated from the middlings in the mechanical flotation cell. Under conditions of pH=10.3 with a pulp concentration of 35% and a collector concentration of 180 g/t, a yield of 12.89% mica and 42.73% quartz was obtained, with silica grades as high as 71.50% in the quartz. The mica and quartz products can be used in construction ceramics and construction sand, respectively. It is believed that the outcomes of this work could provide ideas for comprehensive utilization of sulfide tailings.