T4 DNA Research Articles

Structural and functional insights into the interaction between the bacteriophage T4 DNA processing proteins gp32 and Dda.

Bacteriophage T4 is a classic model system for studying the mechanisms of DNA processing. A key protein in T4 DNA processing is the gp32 single-stranded DNA-binding protein. gp32 has two key functions: it binds cooperatively to single-stranded DNA (ssDNA) to protect it from nucleases and remove regions of secondary structure, and it recruits proteins to initiate DNA processes including replication and repair. Dda is a T4 helicase recruited by gp32, and we purified and crystallized a gp32-Dda-ssDNA complex. The low-resolution structure revealed how the C-terminus of gp32 engages Dda. Analytical ultracentrifugation analyses were consistent with the crystal structure. An optimal Dda binding peptide from the gp32 C-terminus was identified using surface plasmon resonance. The crystal structure of the Dda-peptide complex was consistent with the corresponding interaction in the gp32-Dda-ssDNA structure. A Dda-dependent DNA unwinding assay supported the structural conclusions and confirmed that the bound gp32 sequesters the ssDNA generated by Dda. The structure of the gp32-Dda-ssDNA complex, together with the known structure of the gp32 body, reveals the entire ssDNA binding surface of gp32. gp32-Dda-ssDNA complexes in the crystal are connected by the N-terminal region of one gp32 binding to an adjacent gp32, and this provides key insights into this interaction.

RNA Polymerase II is a Polar Roadblock to a Progressing DNA Fork.

DNA replication and transcription occur simultaneously on the same DNA template, leading to inevitable conflicts between the replisome and RNA polymerase. These conflicts can stall the replication fork and threaten genome stability. Although numerous studies show that head-on conflicts are more detrimental and more prone to promoting R-loop formation than co-directional conflicts, the fundamental cause for the RNA polymerase roadblock polarity remains unclear, and the structure of these R-loops is speculative. In this work, we use a simple model system to address this complex question by examining the Pol II roadblock to a DNA fork advanced via mechanical unzipping to mimic the replisome progression. We found that the Pol II binds more stably to resist removal in the head-on configuration, even with minimal transcript size, demonstrating that the Pol II roadblock has an inherent polarity. However, an elongating Pol II with a long RNA transcript becomes an even more potent and persistent roadblock while retaining the polarity, and the formation of an RNA-DNA hybrid mediates this enhancement. Surprisingly, we discovered that when a Pol II collides with the DNA fork head-on and becomes backtracked, an RNA-DNA hybrid can form on the lagging strand in front of Pol II, creating a topological lock that traps Pol II at the fork. TFIIS facilitates RNA-DNA hybrid removal by severing the connection of Pol II with the hybrid. We further demonstrate that this RNA-DNA hybrid can prime lagging strand replication by T7 DNA polymerase while Pol II is still bound to DNA. Our findings capture basal properties of the interactions of Pol II with a DNA fork, revealing significant implications for transcription-replication conflicts.

Rapid genome-wide profiling of DNA methylation and genetic variation using guide positioning sequencing (GPS).

Whole-genome bisulfite sequencing (WGBS) has been extensively utilized for DNA methylation profiling over the past decade. However, it has shown limitations in terms of high costs and inefficiencies. The productivity and accuracy of DNA methylation detection rely critically on the optimization of methodologies and the continuous refinements of related sequencing platforms. Here, we describe a detailed protocol of guide positioning sequencing (GPS), a bisulfite-based, location-specific sequencing technology designed for comprehensive DNA methylation characterization across the genome. The fundamental principle of GPS lies in the substitution of dCTP with 5-methyl-dCTP (5mC) at the 3'-end of DNA fragments by T4 DNA polymerase, which protects cytosines from bisulfite conversion to preserve the integrity of the base composition. This alteration allows the 3'-end to independently facilitate genetic variation profiling and guides the 5'-end, enriched with methylation information, to align more rapidly to the reference genome. Hence, GPS enables the concurrent detection of both genetic and epigenetic variations. Additionally, we provide an accessible description of the data processing, specifically involving certain software and scripts. Overall, the entire GPS procedure can be completed within a maximum of 15days, starting with a low initial DNA input of 100-500ng, followed by 4-5days for library construction, 8-10days for high-throughput sequencing (HTS) and data analysis, which can greatly facilitate the promotion and application of DNA methylation detection, especially for the rapid clinical diagnosis of diverse disease pathologies associated with concurrent genetic and epigenetic variations.

Self-reinforced D-MOF and autocatalytic AuPd@SnS2 dual-wavelength electrochemiluminescence biosensor for detection of ctDNA and CEA

Trace detection of circulating tumor DNA (ctDNA) and CEA is of great significance for early prevention and diagnosis of cancer. In this work, the well electrochemiluminescence (ECL) of the dual-ligand metal-organic frameworks (D-MOFs) and AuPd@SnS2 QDs nuclear-satellite conjugate was newly explored, and a dual-wavelength biosensing platform based on ECL energy transfer between D-MOFs and AuPd NPs coupled with catalytic effect of AuPd NPs on ECL of SnS2 QDs was developed for detection of trace ctDNA and CEA. Here, thanks to the ordered heterogeneous arrangement and network charge transfer of the luminescent ligand, the prepared D-MOF exhibits highly enhanced ECL without exogenous co-reactants. Target ctDNA was exponentially amplified using an entropy-driven DNA cycle amplification strategy to obtain bandage DNA, which triggered the DNA walker to connect the AuPd@SnS2 core-satellite probe to the electrode. Therefore, the ECL ratio of D-MOF and sensitized SnS2 at 535 nm and 650 nm was used to achieve ultrasensitive detection of trace ctDNA. Moreover, the specific recognition of target CEA to T1 DNA induced changes in dual-wavelength signals to achieve further detection of CEA, and ensure the accuracy of cancer analysis. The work opened up two novel ECL materials and developed a novel ECL biosensor for rapid detection of double tumor markers, providing a new way for early prevention and diagnosis of actual cancer.

Template-dependent DNA ligation for the synthesis of modified oligonucleotides

Chemical modification of DNA is a common strategy to improve the properties of oligonucleotides, particularly for therapeutics and nanotechnology. Existing synthetic methods essentially rely on phosphoramidite chemistry or the polymerization of nucleoside triphosphates but are limited in terms of size, scalability, and sustainability. Herein, we report a robust alternative method for the de novo synthesis of modified oligonucleotides using template-dependent DNA ligation of shortmer fragments. Our approach is based on the fast and scaled accessibility of chemically modified shortmer monophosphates as substrates for the T3 DNA ligase. This method has shown high tolerance to chemical modifications, flexibility, and overall efficiency, thereby granting access to a broad range of modified oligonucleotides of different lengths (20 → 120 nucleotides). We have applied this method to the synthesis of clinically relevant antisense drugs and ultramers containing diverse modifications. Furthermore, the designed chemoenzymatic approach has great potential for diverse applications in therapeutics and biotechnology.

Point-of-care testing of rpoB in Mycobacterium tuberculosis using multiply-primed-RCA coupled with CRISPR/Cas12a

PurposeDue to the serious threat of tuberculosis to global health and limitations of existing diagnostic methods, this study combined the CRISPR/Cas12a system with Multiply-primed-RCA (MRCA) technology for Mycobacterium tuberculosis Point-of-care Testing (POCT). MethodWe utilized T4 and Taq DNA ligases, compared the effects of specific primers and random 6NS primers on the method, and integrated MRCA and the CRISPR-Cas12a system in one tube. By optimizing conditions such as the concentration of DNA ligase, the concentration of padlock probes, and the number of cycles, we finally established T4-MRCA-Cas12a and Taq-MRCA-Cas12a methods for both stepwise and one-step. ResultsThe limits of detection of the one-step T4/Taq-MRCA-Cas12a were 104aM and 103aM. With no cross-reactivity with DNA from other bacterial strains. The accuracy and specificity were 88 % and 100 % for T4-MRCA-Cas12a, and 96 % and 100 % for Taq-MRCA-Cas12a, respectively. ConclusionWe developed a POCT method that can directly identify MTB through the naked eye.

A New Strategy for Ultrasensitive Detection Based on Target microRNA-Triggered Rolling Circle Amplification in the Early Diagnosis of Alzheimer's Disease.

There is an urgent need to accurately quantify microRNA (miRNA)-based Alzheimer's disease (AD) biomarkers, which have emerged as promising diagnostic biomarkers. In this study, we present a rapid and universal approach to establishing a target miRNA-triggered rolling circle amplification (RCA) detection strategy, which achieves ultrasensitive detection of several targets, including miR-let7a-5p, miR-34a-5p, miR-206-3p, miR-9-5p, miR-132-3p, miR-146a-5p, and miR-21-5p. Herein, the padlock probe contains three repeated signal strand binding regions and a target miRNA-specific region. The target miRNA-specific region captures miRNA, and then the padlock probe is circularized with the addition of T4 DNA ligase. Subsequently, an RCA reaction is triggered, and RCA products containing multiple signal strand binding regions are generated to trap abundant fluorescein-labeled signal strands. The addition of exonuclease III (Exo III) causes signal strand digestion and leads to RCA product recycling and liberation of fluorescein. Ultimately, graphene oxide (GO) does not absorb the liberated fluorescein because of poor mutual interaction. This method exhibited high specificity, sensitivity, repeatability, and stability toward let-7a, with a detection limit of 19.35 fM and a linear range of 50 fM to 5 nM. Moreover, it showed excellent applicability for recovering miRNAs in normal human serum. Our strategy was applied to detect miRNAs in the plasma of APP/PS1 mice, demonstrating its potential in the diagnosis of miRNA-associated disease and biochemical research.

Facile Splint-Free Circularization of ssDNA with T4 DNA Ligase by Redesigning the Linear Substrate to Form an Intramolecular Dynamic Nick.

The efficient preparation of single-stranded DNA (ssDNA) rings, as a macromolecular construction approach with topological features, has aroused much interest due to the ssDNA rings' numerous applications in biotechnology and DNA nanotechnology. However, an extra splint is essential for enzymatic circularization, and by-products of multimers are usually present at high concentrations. Here, we proposed a simple and robust strategy using permuted precursor (linear ssDNA) for circularization by forming an intramolecular dynamic nick using a part of the linear ssDNA substrate itself as the template. After the simulation of the secondary structure for desired circular ssDNA, the linear ssDNA substrate is designed to have its ends on the duplex part (≥5 bp). By using this permuted substrate with 5'-phosphate, the splint-free circularization is simply carried out by T4 DNA ligase. Very interestingly, formation of only several base pairs (2-4) flanking the nick is enough for ligation, although they form only instantaneously under ligation conditions. More significantly, the 5-bp intramolecular duplex part commonly exists in genomes or functional DNA, demonstrating the high generality of our approach. Our findings are also helpful for understanding the mechanism of enzymatic DNA ligation from the viewpoint of substrate binding.

Reconstruction of artificial nuclei with nuclear import activity in living mouse oocytes.

In eukaryotes, DNA is housed within the cell nucleus. Molecules required for the formation of a nucleus have been identified using in vitro systems with frog egg extracts and in vivo imaging of somatic cells. However, little is known about the physicochemical factors and conditions required for nuclear formation in mouse oocytes. In this study, using a reconstitution approach with purified DNA, we aimed to determine factors, such as the amount and timing of DNA introduction, required for the formation of nuclei with nuclear transport activity in mouse oocytes. T4 phage DNA (~166 kbp) was microinjected into strontium-activated oocytes to evaluate the conditions appropriate for nuclear formation. Microinjection of 100-500 ng/μL of T4 DNA, but not 20 ng/μL, was sufficient for the formation of nucleus-like structures. Furthermore, microinjection of DNA during metaphase II to telophase II, but not during interphase, was sufficient. Electron and fluorescence microscopy showed that T4 DNA-induced nucleus-like structures had nuclear lamina and nuclear pore complex structures similar to those of natural nuclei, as well as nuclear import activity. These results suggest that exogenous DNA can form artificial nuclei with nuclear transport functions in mouse oocytes, regardless of the sequence or source of the DNA.

An Orthogonal T7 Replisome for Continuous Hypermutation and Accelerated Evolution in E. coli.

Systems that perform continuous hypermutation of designated genes without compromising the integrity of the host genome can dramatically accelerate the evolution of new or enhanced protein functions. We describe an orthogonal DNA replication system in E. coli based on the controlled expression of the replisome of bacteriophage T7. The system replicates circular plasmids that enable high transformation efficiencies and seamless integration into standard molecular biology workflows. Engineering of T7 DNA polymerase yielded variant proteins with mutation rates of 1.7 × 10 -5 substitutions per base in vivo - 100,000-fold above the genomic mutation rate. Continuous evolution using the mutagenic T7 replisome was demonstrated by expanding the substrate scope of TEM-1 β-lactamase and increase activity 1,000-fold against clinically relevant monobactam and cephalosporin antibiotics in less than one week.

T4 DNA polymerase prevents deleterious on-target DNA damage and enhances precise CRISPR editing

Unintended on-target chromosomal alterations induced by CRISPR/Cas9 in mammalian cells are common, particularly large deletions and chromosomal translocations, and present a safety challenge for genome editing. Thus, there is still an unmet need to develop safer and more efficient editing tools. We screened diverse DNA polymerases of distinct origins and identified a T4 DNA polymerase derived from phage T4 that strongly prevents undesired on-target damage while increasing the proportion of precise 1- to 2-base-pair insertions generated during CRISPR/Cas9 editing (termed CasPlus). CasPlus induced substantially fewer on-target large deletions while increasing the efficiency of correcting common frameshift mutations in DMD and restored higher level of dystrophin expression than Cas9-alone in human cardiomyocytes. Moreover, CasPlus greatly reduced the frequency of on-target large deletions during mouse germline editing. In multiplexed guide RNAs mediating gene editing, CasPlus repressed chromosomal translocations while maintaining gene disruption efficiency that was higher or comparable to Cas9 in primary human T cells. Therefore, CasPlus offers a safer and more efficient gene editing strategy to treat pathogenic variants or to introduce genetic modifications in human applications.

T7 DNA polymerase treatment improves quantitative sequencing of both double-stranded and single-stranded DNA viruses

T7 DNA polymerase treatment improves quantitative sequencing of both double-stranded and single-stranded DNA viruses

Maximizing the mRNA productivity for in vitro transcription by optimization of fed-batch strategy

In vitro transcription (IVT) is the main manufacturing method to produce mRNA vaccines. In this study, a fed-batch strategy was systematically optimized for IVT process with dual goals of achieving a high reaction rate and maximizing the final mRNA yield simultaneously. Initially various experimental conditions were investigated including Mg2+, nucleotide triphosphates (NTP), dithiothreitol (DTT), spermidine, as well as the temperature and ionic strength. It was found that the concentrations of Mg2+ and NTP had a significant impact on IVT process. Subsequently, under the optimized conditions, dividing the IVT reaction into three distinct phases was proposed to enable more efficient transcription. By optimizing the concentrations of Mg2+ and NTP in two replenishment processes, our fed-batch strategy resulted in the production of 367.8 μg of mRNA with reduced dsRNA byproducts within 180 min. This was achieved under conditions of a final volume of 30 μL, 250 U T7 RNA polymerase (RNAP), and 2 μg DNA template. In conclusion, the IVT process using a fed-batch approach, rather than an excessive one-time NTP input, is an efficient method to improve productivity given a fixed amount of T7 RNAP and DNA template.

A universal fluorescence biosensor based on rolling circle amplification and locking probe for DNA detection.

Astable DNA signal amplification sensor was developed on account of rolling circle amplification (RCA). This sensor includes target DNA-controlled rolling circle amplification technology and locking probe DNA replacement technology, which can be used to detect DNA fragments with genetic information, thus constructing a biosensor for universal detection of DNA. This study takes the homologous DNA of human immunodeficiency virus (HIV) and let-7a as examples to describe this biosensor. The padlock probe is first cyclized by T4 DNA ligase in response to the target's reaction with it. Then, rolling cycle amplification is initiated by Phi29 DNA polymerase, resulting in the formation of a lengthy chain with several triggers. These triggers can open the locked probe LP1 with the fluorescence signal turned off, so that it can continue to react with H2 to form a stable H1-H2 double strand. This regulates the distance between B-DNA modified by the quenching group and H1 modified by fluorescent group, and the fluorescence signal is recovered.

Determining optimal surveillance techniques for the microbial community on human skin using RNAseq data analysis

Background: The largest organ in the human body, the skin, serves as a physical barrier to the outside world. It also houses millions of bacteria, viruses, and fungi that protect us against invading pathogens or result in altered physiology and disease. These microorganisms can contribute to normal skin health or predispose individuals to pathogenic disorders. Surveillance and observation of the microbiome can give insight into identifying common taxa that compose our skin and indications of new or changing pathogens. However, to do this effciently, it is important to understand what can be detected from skin samples and the differences we may see using various collection methods. Methods: We used publicly available NCBI SRA RNAseq bioprojects that queried “skin,” processing 132 bioprojects with 8,274 samples. Using FastQC, Salmon, KRAKEN2, and MiCXR/Immunarch, we aimed to analyze the quality, human gene transcripts, infections, and B/T- cell responses, respectively. We aimed to identify what skin sampling method provides the best data on the skin microbiome, human gene mapping, and B/T-cell immune repertoire. This project is based on observational methods, not a specific hypothesis. Results: From the KRAKEN2 data, there were 14,383 viruses and 14,691 bacteria assessed through all “skin” BioProjects. From the extensive data pool, we identified unique BioProject signatures for protest (Leishmania), bacteria (Mycoplasma), and viruses (HSV1 dose dependencies, HPV in human warts, Chinese transmitted tick viruses, Human T-cell lymphotropic virus, and the first-ever human case of equine infectious anemia virus). The use of read mapping and coverage is critical to confirming the presence of foreign species, noted through the observation of T4 DNA ligase RNA presence prior to 2018 RNA sequencing. Once pathogens were detected, cellular response mapping was developed, yielding insights into the pathophysiology of multiple viral infections of the skin and sex differences. Conclusion: Detecting a wide variety of microorganisms on the skin can give insight into dermatological pathologies and skin physiology. Using the publicly available skin datasets, we see many unique stories of microorganisms in the skin. This big data mapping strategy highlights the importance of broad observational mapping, possible with cutting-edge sequencing tools. This work was supported by the MI-SAPPHIRE program of MDHHS and the CDC. This is the full abstract presented at the American Physiology Summit 2024 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

Four Parallel Pathways in T4 Ligase-Catalyzed Repair of Nicked DNA with Diverse Bending Angles.

The structural diversity of biological macromolecules in different environments contributes complexity to enzymological processes vital for cellular functions. Fluorescence resonance energy transfer and electron microscopy are used to investigate the enzymatic reaction of T4 DNA ligase catalyzing the ligation of nicked DNA. The data show that both the ligase-AMP complex and the ligase-AMP-DNA complex can have four conformations. This finding suggests the parallel occurrence of four ligation reaction pathways, each characterized by specific conformations of the ligase-AMP complex that persist in the ligase-AMP-DNA complex. Notably, these complexes have DNA bending angles of ≈0°, 20°, 60°, or 100°. The mechanism of parallel reactions challenges the conventional notion of simple sequential reaction steps occurring among multiple conformations. The results provide insights into the dynamic conformational changes and the versatile attributes of T4 DNA ligase and suggest that the parallel multiple reaction pathways may correspond to diverse T4 DNA ligase functions. This mechanism may potentially have evolved as an adaptive strategy across evolutionary history to navigate complex environments.

Involvement of the Cell Division Protein DamX in the Infection Process of Bacteriophage T4.

The molecular mechanism of how the infecting DNA of bacteriophage T4 passes from the capsid through the bacterial cell wall and enters the cytoplasm is essentially unknown. After adsorption, the short tail fibers of the infecting phage extend from the baseplate and trigger the contraction of the tail sheath, leading to a puncturing of the outer membrane by the tail tip needle composed of the proteins gp5.4, gp5 and gp27. To explore the events that occur in the periplasm and at the inner membrane, we constructed T4 phages that have a modified gp27 in their tail tip with a His-tag. Shortly after infection with these phages, cells were chemically cross-linked and solubilized. The cross-linked products were affinity-purified on a nickel column and the co-purified proteins were identified by mass spectrometry, and we found that predominantly the inner membrane proteins DamX, SdhA and PpiD were cross-linked. The same partner proteins were identified when purified gp27 was added to Escherichia coli spheroplasts, suggesting a direct protein-protein interaction.

An ATP-free packaging of T4 DNA

Packaging of viral DNA into a capsid with liquid crystalline density is a crucial step in viral reproduction. DNA packaging with an adenosine triphosphate (ATP)-fueled molecular motor is an established viral DNA packaging mechanism system. On the other hand, DNA is compacted by the conformational change attributable to multivalent cations exclusively at valences higher than three. The conformational change of DNA was not considered as a mechanism of DNA packaging of viruses. Here, T4 DNA, ejected from a capsid in the ambient concentration of phosphate corresponding to the intra-cell concentration, is packaged into the capsid when the phosphate concentration decreases to the extra-cell concentration in coexistence with divalent cations, that is, Ca2+ and Mg2+. The compaction and packaging processes coincide with the conformational change of DNA. Divalent cations can compact T4 DNA when the counter anion is phosphate. The DNA-packaged and re-generated virions showed equivalent infective ability with the original populations. Fluorescent microscopy distinguished the conformational changes of DNA between compact forms and coil forms. Packaged or unpackaged DNA was confirmed enzymatically. Plaque-forming unit (Pfu) was used as the measure of infectious ability of virions. The concentration of ATP was measured by the luminometric method. The packaging process was proceeded in picomolar or lower concentration of ATP. This series of procedures may constitute a new ATP-free or low-ATP approach to packaging viral DNA with DNA conformational change underpinning the process. The results from this study may disclose an undiscovered facet of T4 life cycle.

Abstract 1968 Dynamics of Exonuclease Proofreading by T7 DNA Polymerase During DNA Replication

Abstract 1968 Dynamics of Exonuclease Proofreading by T7 DNA Polymerase During DNA Replication

Highly Parallelized Construction of DNA from Low-Cost Oligonucleotide Mixtures Using Data-Optimized Assembly Design and Golden Gate.

Commercially synthesized genes are typically made using variations of homology-based cloning techniques, including polymerase cycling assembly from chemically synthesized microarray-derived oligonucleotides. Here, we apply Data-optimized Assembly Design (DAD) to the synthesis of hundreds of codon-optimized genes in both constitutive and inducible vectors using Golden Gate Assembly. Starting from oligonucleotide pools, we synthesize genes in three simple steps: (1) amplification of parts belonging to individual assemblies in parallel from a single pool; (2) Golden Gate Assembly of parts for each construct; and (3) transformation. We construct genes from receiving DNA to sequence confirmed isolates in as little as 4 days. By leveraging the ligation fidelity afforded by T4 DNA ligase, we expect to be able to construct a larger breadth of sequences not currently supported by homology-based methods, which require stability of extensive single-stranded DNA overhangs.