Synthetic Tetraploids Research Articles

Regional Active Transcription Associates with Homoeologous Exchange Breakpoints in Synthetic Brassica Tetraploids.

Polyploidization plays a crucial role in plant evolution and is becoming increasingly important in breeding. Structural variations and epigenomic repatterning have been observed in synthetic polyploidizations. However, the mechanisms underlying the occurrence and their effects on gene expression and phenotype remain unknown. Here, we investigated genome-wide large deletion/duplication regions (DelDups) and genomic methylation dynamics in leaf organs of progeny from the first eight generations of synthetic tetraploids derived from Chinese cabbage (Brassica rapa L. ssp. pekinensis) and cabbage (Brassica oleracea L. var. capitata). One- or two-copy DelDups, with a mean size of 5.70 Mb (400 kb - 65.85 Mb), occurred from the first generation of selfing and thereafter. The duplication of a fragment in one subgenome consistently coincided with the deletion of its syntenic fragment in the other subgenome, and vice versa, indicating that these DelDups were generated by homoeologous exchanges (HEs). Interestingly, the larger the genomic syntenic region, the higher the frequency of DelDups, further suggesting that the pairing of large homoeologous fragments is crucial for HEs. Moreover, we found that the active transcription of continuously distributed genes in local regions is positively associated with the occurrence of HE breakpoints. In addition, the expression of genes within DelDups exhibited a dosage effect, and plants with extra parental genomic fragments generally displayed phenotypes biased towards the corresponding parent. Genome-wide methylation fluctuated remarkably, which did not clearly affect gene expression on a large scale. Our findings provide insights into the early evolution of polyploid genomes, offering valuable knowledge for polyploidization-based breeding.

Polyploidy‐induced floral changes lead to unexpected pollinator behavior in Arabidopsis arenosa

The paradox between the ubiquity of polyploid lineages in plants and the early obstacles to the establishment of polyploids is a long‐studied yet unresolved question in evolutionary biology. It is assumed that to successfully persist after emergence, newly formed polyploids need to display certain fitness advantages and show a certain extent of reproductive isolation with their diploid progenitors. In this study, we tested whether immediate floral changes following polyploidization can improve pollinator visitation and enable pollinator preference leading to assortative mating, i.e. build a premating reproductive barrier between diploids and polyploids. For this purpose, we generated synthetic tetraploids of Arabidopsis arenosa and measured insect visitor behavior on diploids and synthetic tetraploids. We found that the increased floral size that accompanied polyploidization did not lead to a measurable increase in visitor preference, with insects visiting diploid and tetraploid plants at equal frequency. Despite this observation, tetraploids set more fruits than diploids, suggesting a positive impact of polyploidization on pollen transfer via other means. In addition, polyploidization did not lead to assortative mating but instead promoted interploidy pollen exchange, since visitors preferentially switched between cytotypes rather than preferring one. Consistent with this switching behavior, most of the progeny from tetraploid plants were triploid. Our data suggest that polyploidization has an immediate impact on mating in plants, but in a more complex way than has been assumed previously.

Seed shape and size of Silene latifolia, differences between sexes, and influence of the parental genome in hybrids with Silene dioica.

Plants undergo various natural changes that dramatically modify their genomes. One is polyploidization and the second is hybridization. Both are regarded as key factors in plant evolution and result in phenotypic differences in different plant organs. In Silene, we can find both examples in nature, and this genus has a seed shape diversity that has long been recognized as a valuable source of information for infrageneric classification. Morphometric analysis is a statistical study of shape and size and their covariations with other variables. Traditionally, seed shape description was limited to an approximate comparison with geometric figures (rounded, globular, reniform, or heart-shaped). Seed shape quantification has been based on direct measurements, such as area, perimeter, length, and width, narrowing statistical analysis. We used seed images and processed them to obtain silhouettes. We performed geometric morphometric analyses, such as similarity to geometric models and elliptic Fourier analysis, to study the hybrid offspring of S. latifolia and S. dioica. We generated synthetic tetraploids of Silene latifolia and performed controlled crosses between diploid S. latifolia and Silene dioica to analyze seed morphology. After imaging capture and post-processing, statistical analysis revealed differences in seed size, but not in shape, between S. latifolia diploids and tetraploids, as well as some differences in shape among the parentals and hybrids. A detailed inspection using fluorescence microscopy allowed for the identification of shape differences in the cells of the seed coat. In the case of hybrids, differences were found in circularity and solidity. Overal seed shape is maternally regulated for both species, whereas cell shape cannot be associated with any of the sexes. Our results provide additional tools useful for the combination of morphology with genetics, ecology or taxonomy. Seed shape is a robust indicator that can be used as a complementary tool for the genetic and phylogenetic analyses of Silene hybrid populations.

Effect of tetraploidization on morphological and fertility characteristics in Iris × norrisii Lenz

Tetraploids have been widely regarded as important contributors to the development of prime cultivars in many horticultural groups of Iris. These tetraploid plants tend to display intense flower color, increased flower size, and larger growth vitality compared to their diploid progenitors. However, no polyploid has ever been found or induced in the interspecific hybrid Iris × norrisii. In order to obtain new, innovative polyploid germplasm in I. × norrisii, 64 pre-germinated seeds were soaked with 0.05% colchicine, of which 14 survived and 6 flowered in the first growing season. Eight tetraploids were identified from the self-fertilized progeny of one of the six adult plants. The synthetic tetraploid I. × norrisii showed greater viability and developed wider leaves with larger stomata and pollen grains than their diploid counterparts. With tetraploidization, flowers were larger (by 26%), fruits became longer (by 54%), and selfing seeds were a little wider (by 10%) and significantly longer (by 33%) in size. The synthetic tetraploids exhibited a 9.10% selfing fruit-setting rate with 100% plump seeds. Conversely, most seeds collected from the interploidy cross between tetraploids and diploids were empty, with only 4.11% being plump. As a rare Iris species capable of flowering in the first growing season, the induced tetraploid I. × norrisii offers great potential to produce more genetically diverse progenies in a relatively short time, and thus provides a foundation for further research into polyploidization in Iris.

An Overview of Mapping Quantitative Trait Loci in Peanut (Arachis hypogaea L.).

Quantitative Trait Loci (QTL) mapping has been thoroughly used in peanut genetics and breeding in spite of the narrow genetic diversity and the segmental tetraploid nature of the cultivated species. QTL mapping is helpful for identifying the genomic regions that contribute to traits, for estimating the extent of variation and the genetic action (i.e., additive, dominant, or epistatic) underlying this variation, and for pinpointing genetic correlations between traits. The aim of this paper is to review the recently published studies on QTL mapping with a particular emphasis on mapping populations used as well as traits related to kernel quality. We found that several populations have been used for QTL mapping including interspecific populations developed from crosses between synthetic tetraploids and elite varieties. Those populations allowed the broadening of the genetic base of cultivated peanut and helped with the mapping of QTL and identifying beneficial wild alleles for economically important traits. Furthermore, only a few studies reported QTL related to kernel quality. The main quality traits for which QTL have been mapped include oil and protein content as well as fatty acid compositions. QTL for other agronomic traits have also been reported. Among the 1261 QTL reported in this review, and extracted from the most relevant studies on QTL mapping in peanut, 413 (~33%) were related to kernel quality showing the importance of quality in peanut genetics and breeding. Exploiting the QTL information could accelerate breeding to develop highly nutritious superior cultivars in the face of climate change.

Induction and evaluation of colchitetraploids of two species of Tinospora Miers, 1851.

Autotetraploidy, both natural and/or induced, has potential for genetic improvement of various crop species including that of medicinal importance. Tinospora cordifolia (Willdenow, 1806) Miers, 1851 ex Hooker et Thomson, 1855 and T. sinensis (Loureiro, 1790) Merrill, 1934 are two diploid species, which are dioecious, deciduous and climbing shrubs with high medicinal importance. Among the three methods used for induction of polyploidy by colchicine treatment, it was cotton swab method which successfully induced the polyploidy in both species. The morphological and cytogenetical features of the synthetic tetraploids were compared with their diploid counterparts. The tetraploids were morphologically distinct from diploid plants. They exhibited larger organs, such as stem, leaves, inflorescence, fruits, flowers and seeds. The tetraploids were characterized by the presence of low quadrivalent frequency and high bivalent average. Unequal distribution of chromosomes at anaphase I was found in 60% cells. The present study provides important information on the superiority of autotetraploids as compared to diploid counterparts in both species.

Chromosome set doubling and ploidy stability in synthetic auto- and allotetraploid of Eucalyptus: from in vitro condition to the field

Given the increased demand for wood producing species with fast growth, chromosome set doubling (CSD) is an option to enrich germplasm banks and breeding programs with synthetic polyploids in relatively short time. Here, we aimed to establish a feasible practice of an in vitro procedure to create solid polyploid Eucalyptus, and to verify the DNA ploidy level fidelity in newly synthetized polyploids. We treated 1.0 and 1.5 cm shoot tips of Eucalyptus grandis with colchicine in distinct times and concentrations and achieved between 0 and 66.67% autotetraploids, totaling 87 plantlets from all CSD treatments. However, a reversion to diploidy and/or mixoploidy was observed in 35.5% and 22.0% of total plantlets in the first and second ploidy level assessments, respectively. Based on the results, a second CSD assay was performed for 1.5 cm shoot tips of Eucalyptus grandis, Eucalyptus urophylla, Eucalyptus benthamii and E. urophylla × E. grandis, which we treated with 1.5 mM colchicine for 36 h. Auto- and allotetraploidy rates ranged from 40.8 to 65.5%, and again DNA ploidy level changes were detected in in vitro and ex vitro individuals. In conclusion, fine adjustments of the antitubulin concentration and exposure time are needed for each explant and genotype/species to CSD from apical meristem stem cells. Since ploidy stability was found to be a dramatic problem in Eucalyptus CSD, we promote recurrent DNA ploidy level screening to achieve solid auto- and allotetraploids propagation and to identify undesired mixoploids and diploids in in vitro and ex vitro conditions. Eucalyptus auto- and allotetraploids were obtained, enriching the germplasm banks. Looking for DNA ploidy level, changes were identified in some synthetic tetraploids, evidencing the ploidy instability as a dramatic problem.

Genetic imprints of domestication for disease resistance, oil quality, and yield component traits in groundnut (Arachis hypogaea L.).

Ploidy difference between wild Arachis species and cultivated genotypes hinder transfer of useful alleles for agronomically important traits. To overcome this genetic barrier, two synthetic tetraploids, viz., ISATGR 1212 (A. duranensis ICG 8123 × A. ipaensis ICG 8206) and ISATGR 265-5A (A. kempff-mercadoi ICG 8164 × A. hoehnei ICG 8190), were used to generate two advanced backcross (AB) populations. The AB-populations, namely, AB-pop1 (ICGV 91114 × ISATGR 1212) and AB-pop2, (ICGV 87846 × ISATGR 265-5A) were genotyped with DArT and SSR markers. Genetic maps were constructed for AB-pop1 and AB-pop2 populations with 258 loci (1415.7cM map length and map density of 5.5 cM/loci) and 1043 loci (1500.8cM map length with map density of 1.4cM/loci), respectively. Genetic analysis identified large number of wild segments in the population and provided a good source of diversity in these populations. Phenotyping of these two populations identified several introgression lines with good agronomic, oil quality, and disease resistance traits. Quantitative trait locus (QTL) analysis showed that the wild genomic segments contributed favourable alleles for foliar disease resistance while cultivated genomic segments mostly contributed favourable alleles for oil quality and yield component traits. These populations, after achieving higher stability, will be useful resource for genetic mapping and QTL discovery for wild species segments in addition to using population progenies in breeding program for diversifying the gene pool of cultivated groundnut.

Rapid and pervasive development- and tissue-specific homeolog expression partitioning in newly formed inter-subspecific rice segmental allotetraploids

BackgroundIn diverse plant taxa, whole-genome duplication (WGD) events are major sources of phenotypic novelty. Studies of gene expression in synthetic polyploids have shown immediate expression and functional partitioning of duplicated genes among different tissues. Many studies of the tissue-specific homeolog expression partitioning have focused on allopolyploids that have very different parental genomes, while few studies have focused on autopolyploids or allopolyploids that have similar parental genomes.ResultsIn this study, we used a set of reciprocal F1 hybrids and synthetic tetraploids constructed from subspecies (japonica and indica) of Asian rice (Oryza sativa L.) as a model to gain insights into the expression partitioning of homeologs among tissues in a developmental context. We assayed the tissue-specific silencing (TSS) of the parental homeologs of 30 key genes in the hybrids and tetraploids relative to the in vitro “hybrids” (parental mixes) using Sequenom MassARRAY. We found that the parental mix and synthetic tetraploids had higher frequencies of homeolog TSS than the F1, revealing an instantaneous role of WGD on homeolog expression partitioning.ConclusionsOur observations contradicted those of previous studies in which newly formed allopolyploids had a low TSS frequency, similar to that of F1 hybrids, suggesting that the impact of WGD on homeolog expression requires a longer time to manifest. In addition, we found that the TSS frequency in the tetraploids varied at different growth stages and that roots had a much higher frequency of TSS than leaves, which indicated that developmental and metabolic traits may influence the expression states of duplicated genes in newly formed plant polyploids.

Production of synthetic tetraploids as a tool for polyploid research

Abstract. Polyploidization has been traditionally considered a phenomenon that mediates ecological differentiation; however, the adaptive value of genome duplications has been seldom explored. Natural or synthetic polyploids offer unique opportunities to experimentally quantify the immediate consequences of genome duplications in plant traits that may be involved with ecological differentiation. Jasione maritima is a diploid-tetraploid complex with cytotypes distributed allopatrically in an environmental gradient ideal for exploring the role of genome duplications in the success of polyploid lineages. However, like in numerous other polyploid complexes, neotetraploids of J. maritima have not been found in nature. In this study we developed a methodology to obtain synthetic tetraploids from seeds collected in wild diploid plants of J. maritima. We tested the effect of different colchicine concentrations and seedling ages in survival and polyploidization success of J. maritima seedlings, using flow cytometry to assess ploidy level and considering the population of origin. A methodology to synchronize seed germination was also explored. Synchronization of seed germination was best achieved using a cold treatment of 2 weeks before the transference to a growth chamber. An overall survival rate of 11.5±0.7 % and further tetraploid conversion of 35.6±2.9 % was obtained using 3-day-old seedlings of J. maritima. Survival rates were variable depending on colchicine treatment (the highest the most lethal) and seedling origin (i.e. population), while conversion rate was similar across these factors and high rates of tetraploid conversion were obtained. Considering that the main constraint was survival to the colchicine treatment, we suggest the use of the lowest colchicine concentration tested, i.e. 0.1 % colchicine. The use of older seedlings increased survival rates but, in many cases, compromised a complete tetraploid conversion, generating many diploid-tetraploid mixoploid plants.

Production of synthetic tetraploids as a tool for polyploid research

Production of synthetic tetraploids as a tool for polyploid research

Colchicine application significantly affects plant performance in the second generation of synthetic polyploids and its effects vary between populations.

Understanding the direct consequences of polyploidization is necessary for assessing the evolutionary significance of this mode of speciation. Previous studies have not studied the degree of between-population variation that occurs due to these effects. Although it is assumed that the effects of the substances that create synthetic polyploids disappear in second-generation synthetic polyploids, this has not been tested. The direct consequences of polyploidization were assessed and separated from the effects of subsequent evolution in Vicia cracca , a naturally occurring species with diploid and autotetraploid cytotypes. Synthetic tetraploids were created from diploids of four mixed-ploidy populations. Performance of natural diploids and tetraploids was compared with that of synthetic tetraploids. Diploid offspring of the synthetic tetraploid mothers were also included in the comparison. In this way, the effects of colchicine application in the maternal generation on offspring performance could be compared independently of the effects of polyploidization. The sizes of seeds and stomata were primarily affected by cytotype, while plant performance differed between natural and synthetic polyploids. Most performance traits were also determined by colchicine application to the mothers, and most of these results were largely population specific. Because the consequences of colchicine application are still apparent in the second generation of the plants, at least the third-generation polyploids should be considered in future comparisons. The specificities of the colchicine-treated plants may also be caused by strong selection pressures during the creation of synthetic polyploids. This could be tested by comparing the initial sizes of plants that survived the colchicine treatments with those of plants that did not. High variation between populations also suggests that different polyploids follow different evolutionary trajectories, and this should be considered when studying the effects of polyploidization.

Stability in chromosome number and DNA content in synthetic tetraploids of Lolium multiflorum after two generations of selection

ABSTRACT: Chromosome doubling of Italian ryegrass genotypes ( Lolium multiflorum Lam.) adapted to the brazilian edaphoclimatic conditions is an important strategy used by breeders and aims to obtain more vigorous genotypes with better forage quality and disease resistance. The effectiveness of chromosome doubling can be measured by genetic stability and fertility rates of plants over generations. However, a common problem in the polyploidization process is the regeneration of mixoploid plants that have impaired fertility and genetic stability. The objective of this study was to verify if progenies of recently tetraploidized plants remain stable regarding DNA content and chromosome number, over two generations. Progenies of L. multiflorum plants artificially tetraploidized with colchicine treatment were evaluated. Chromosome counting and estimates of the DNA content were used to evaluate the genetic stability. The percentage of tetraploid plants (4X) increased over generations (18%, 34% and 91% in cycle 0, 1 and 2, respectively). All progenies identified as tetraploid by flow citometry showed variation in chromosome number (mixoploidy), but produced viable seeds. Results showed that stabilization in chromosome number and DNA content in tetraploidized plant progenies requires time and that the success of this procedure depends on a continuous and accurate screening and selection.

Asynchronous meiosis in Cucumis hystrix–cucumber synthetic tetraploids resulting in low male fertility

Interspecific hybridization and allopolyploidization contribute to the improvement of many important crops. Recently, we successfully developed an amphidiploid from an interspecific cross between cucumber (Cucumis sativus, 2n=2x=14) and its relative C. hystrix (2n=2x=24) followed by chemical induction of chromosome doubling. The resulting allotetraploid plant was self-pollinated for three generations. The fertility and seed set of the amphidiploid plants were very low. In this study, we investigated the meiotic chromosome behavior in pollen mother cells with the aid of fluorescence in situ hybridization, aiming to identify the reasons for the low fertility and seed set in the amphidiploid plants. Homologous chromosome pairing appeared normal, but chromosome laggards were common, owing primarily to asynchronous meiosis of chromosomes from the two donor genomes. We suggest that asynchronous meiotic rhythm between the two parental genomes is the main reason for the low fertility and low seed set of the C. hystrix–cucumber amphidiploid plants.

Validation of markers linked to late leaf spot and rust resistance, and selection of superior genotypes among diverse recombinant inbred lines and backcross lines in peanut (Arachis hypogaea L.)

Recombinant inbred lines (RILs) from four populations involving cultivated varieties, and backcross lines from three populations involving cultivated varieties and synthetic tetraploids (developed from wild diploids) were employed for validating late leaf spot (LLS) and rust resistance-linked markers and identifying superior genotypes in peanut. GM2009, GM2301, GM2079, GM1536, GM1954 and IPAHM103 markers showed significant association with rust resistance. They were successfully validated in a new RIL (TG 19 × GPBD 4) and two backcross (DH 86 × ISATGR 278-18 and DH 86 × ISATGR 5) populations. GM1954, GM1009 and GM1573 markers showed significant association with LLS resistance. TAG 19 × GPBD 4 and ICGS 76 × ISATGR 278-18 populations showed strong co-segregation of LLS-linked markers with the phenotype. From these genetic resources, six superior genotypes were identified. RIL 78-1 was resistant to LLS and rust, and recorded 30 % more pod yield than GPBD 4 (control). It also had higher kernel yield and oil yield along with higher oleate and linoleate content over GPBD 4. These genetic and genomic resources could be useful in breeding for LLS and rust resistance in peanut.

Phenotypic and genome size changes (variation) in synthetic tetraploids of daylily (Hemerocallis) in relation to their diploid counterparts

AbstractTetraploids of daylily have taken a leading position among the daylily cultivars due to desirable traits such as vigorous growth and flowers with more intense colour. In our previous studies, several tetraploids of daylily cultivars ‘Blink of an Eye’ and ‘Berlin Multi’ were obtained using in vitro techniques with different antimitotic agents (colchicine, oryzalin, trifluralin, and amiprophos methyl). The purposes of this study were to evaluate changes in daylily tetraploids in relation to their diploid counterparts and to assess variation among diploids and tetraploids derived from genetically homogenous plant material treated with antimitotic agents. In the first year of the ex vitro cultivation, growth of tetraploids was poorer in comparison with diploids, but in the second year, tetraploid growth was much more vigorous. Compared to diploids, in tetraploids of both cultivars percentage of flowering plants was lower, flowering was delayed by 8 days and 1 month in ‘Blink of an Eye’ and ‘Berlin Multi’, respectively, and bud number per scape was lower by approximately 20 and 40 %, respectively. Tetraploid leaves and flowers of both cultivars were significantly larger, chlorophyll concentration index was higher by approximately 40 %, and stomata were longer by 35 %. In ‘Berlin Multi’ tetraploids, inflorescence stems were shorter by 20 %. In ‘Blink of an Eye’, variation in flower colour tone and shape and stamen malformation rate was detected both within the unconverted diploids and tetraploids but was more evident in tetraploids. In both cultivars, variation was also found in the nuclear DNA content, which ranged in diploids and tetraploids, respectively, 8.02–8.53 and 16.01–17.13 pg in ‘Berlin Multi’ and 8.28–8.71 and 15.93–17.36 pg in ‘Blink of an Eye’. Since the variation, while less evident, also occurred in the diploids (regenerated from the antimitotic treated material), we suppose that these variations could be due to antimitotic agents that can induce not only chromosome doubling but also chromosomal and gene mutations. The extent and character of these changes can be related to parental genotype and/or antimitotic agent. Further research is required at the cytological and molecular level to explain the character of changes, epigenetic and/or genetic.

Stochastic changes affect Solanum wild species following autopolyploidization.

Polyploidy is very common within angiosperms, and several studies are in progress to ascertain the effects of early polyploidization at the molecular, physiological, and phenotypic level. Extensive studies are available only in synthetic allopolyploids. By contrast, less is known about the consequences of autopolyploidization. The current study aimed to assess the occurrence and extent of genetic, epigenetic, and anatomical changes occurring after oryzaline-induced polyploidization of Solanum commersonii Dunal and Solanum bulbocastanum Dunal, two diploid (2n=2×=24) potato species widely used in breeding programmes. Microsatellite analysis showed no polymorphisms between synthetic tetraploids and diploid progenitors. By contrast, analysis of DNA methylation levels indicated that subtle alterations at CG and CHG sites were present in tetraploids of both species. However, no change occurred concurrently in all tetraploids analysed with respect to their diploid parent, revealing a stochastic trend in the changes observed. The morpho-anatomical consequences of polyploidization were studied in leaf main veins and stomata. With only a few exceptions, analyses showed no clear superiority of tetraploids in terms of leaf thickness and area, vessel number, lumen size and vessel wall thickness, stomata pore length and width, guard cell width, and stomatal density compared with their diploid progenitors. These results are consistent with the hypothesis that there are no traits systematically associated with autopolyploidy.

The effect of tetraploidization of wild Arachis on leaf morphology and other drought-related traits

Cultivated peanut is an allotetraploid (genome type AABB) with a very narrow genetic base, therefore wild species are an attractive source of new variability and traits. Because most wild species are diploid, the first step of introgression usually involves hybridization of wild species and polyploidization to produce a synthetic allotetraploid (AABB) that is sexually compatible with peanut. This study investigates drought-related traits such as leaf morphology, transpiration profile, chlorophyll meter readings (SCMR), specific leaf area (SLA) and transpiration rate per leaf area for two wild diploids (Arachis duranensis and Arachis ipaënsis) that could be of interest for improvement of the peanut crop. Furthermore, the inheritance of the traits from the diploid to the tetraploid state was investigated. Results showed that whilst some diploid traits such as SCMR, are maintained through hybridization and polyploidization, most characters, such as the leaf area, stomata size, trichome density and transpiration profile, are substantially modified. The study concludes that direct evaluations of drought-related traits in wild diploids may be useful for evaluation of wild species to be used in introgression. However, evaluations on wild-derived synthetic tetraploids are likely to be more informative.

Contribution of synthetic tetraploids (AAAA) and diploids (AA) to black Sigatoka resistance and bunch weight to their triploid progenies

The generation of banana triploids from tetraploid–diploid crosses requires knowledge on the influence of the parents on black Sigatoka resistance and agronomic traits to the triploid progenies. The objective of this investigation was to determine the influence of tetraploid and diploid parents on black Sigatoka resistance and agronomic traits in the triploid progenies generated from tetraploid–diploid crosses. The mating scheme was designed as a 4 × 5 North Carolina II mating design. Due to problems in seed set and germination, progenies from 2 male parents with 4 female parents were evaluated at two sites in Uganda. The results showed that the male-parent triploid progeny heritability estimate for the number of leaves at harvest was greater than the female parent estimate. The diploid parents had higher correlation coefficients for the total leaves at harvest with the triploid progenies than tetraploid parents with triploid progenies. Disease development over time took more days in diploid parents than in the tetraploid parents with the triploid progenies as intermediates. These results suggested that diploids transferred black Sigatoka resistance to the triploid progenies as measured by the number of standing leaves and disease development overtime. There was a positive correlation ( P < 0.05) between tetraploid female parents and triploid progenies for plant height and bunch weight. The triploid progeny–tetraploid female parent heritability estimates for plant height (0.92) and bunch weight (0.72) were highly significant. These results indicated that the female synthetic tetraploids influenced plant height and bunch weight in the triploid progenies. Therefore, it is important to select the tetraploids with heavy bunches to effectively improve yield in triploid progenies generated by tetraploid–diploid crosses. The tetraploid–diploid progenies had a significant ( P < 0.05) family-by-site interaction for bunch weight indicating that new banana genotypes need to be tested across different environments to select stable genotypes to promote to end-users.

Partitioning of an allopolyploid

Partitioning of the constituent genomes and chromosomes offers unique opportunities of analysing the genetic diploidization of the allohexaploid, Triticum aestivum (2n = 6x = 42 = = AABBDD). An extension of the existing aneuploid analysis is necessary to study the positive effects of individual chromosomes on a uniformly homozygous genetic background. Partitioning of Triticum aestivum can be initiated by extracting the three possible tetraploid ancestral components. Extraction of ancestral components may be accomplished either by producing pentaploids involving natural or synthetic tetraploids followed by a series of backcrosses to reconstitute aestivum genotype (backcross extraction method) or by producing multiple monosomics (monosomic method). The accuracy of depolyploidization can be tested by comparing the reconstituted tetraploids extracted by the two methods. A monosomic method of extraction is outlined and discussed. Backcross extraction itself can be a potential source of aneuploids. A new method for producing monosomics is proposed. These monosomics would serve to substantiate the results of extraction studies and partition analysis. Use of synthetic tetraploids restricts the success of backcross extraction owing to the sterility and genetic necrosis in pentaploids. Synthetic allopolyploids, however, have special advantages in extraction studies. Schemes for studying ancestral diploid components of natural allotetraploids and allohexaploids are proposed. Partitioning of allopolyploids presents the possibilities of reconstruction of their entire cytogenetic structure and of the synthesis of new species. The theoretical and practical implications of partitioning are discussed with reference to its utilization in studying the changes which the diploids and polyploids have undergone during evolution.