Synthetic Pathway Biotransformation Research Articles

Novel Hydrogen Bioreactor and Detection Apparatus.

In vitro hydrogen generation represents a clear opportunity for novel bioreactor and system design. Hydrogen, already a globally important commodity chemical, has the potential to become the dominant transportation fuel of the future. Technologies such as in vitro synthetic pathway biotransformation (SyPaB)-the use of more than 10 purified enzymes to catalyze unnatural catabolic pathways-enable the storage of hydrogen in the form of carbohydrates. Biohydrogen production from local carbohydrate resources offers a solution to the most pressing challenges to vehicular and bioenergy uses: small-size distributed production, minimization of CO2 emissions, and potential low cost, driven by high yield and volumetric productivity. In this study, we introduce a novel bioreactor that provides the oxygen-free gas phase necessary for enzymatic hydrogen generation while regulating temperature and reactor volume. A variety of techniques are currently used for laboratory detection of biohydrogen, but the most information is provided by a continuous low-cost hydrogen sensor. Most such systems currently use electrolysis for calibration; here an alternative method, flow calibration, is introduced. This system is further demonstrated here with the conversion of glucose to hydrogen at a high rate, and the production of hydrogen from glucose 6-phosphate at a greatly increased reaction rate, 157 mmol/L/h at 60 °C.

A thermostable recombinant transaldolase with high activity over a broad pH range

Thermophilic enzymes are in high demand for various applications due to their prolonged lifetimes and high reaction rates at elevated temperatures. In this work, an open reading frame TM0295, which encodes a putative transaldolase (TAL) from a hyper-thermophilic microorganism, Thermotoga maritima, was cloned and expressed in Escherichia coli. The enzyme activity of transaldolase at high temperatures (e.g., at 80 °C) was reported here for the first time. The recombinant T. maritima transaldolase was extremely thermostable, with a half-life time of 198 and 13.0 h at 60 °C and 80 °C, respectively. The estimated total turn-over number was 1.5 × 10(6) mol of product per mol of enzyme at 80 °C. This enzyme also exhibited high activities within a broad pH range of 6.0-9.0. This ultra-thermostable TAL with high activity shows great potential for use in such applications as the production of enzymatic biofuels production and the synthesis of high-value carbohydrates by cell-free synthetic pathway biotransformation.

Simpler Is Better: High-Yield and Potential Low-Cost Biofuels Production through Cell-Free Synthetic Pathway Biotransformation (SyPaB)

The production of biofuels from renewable sugars isolated from plants or produced through artificial photosynthesis would provide a sustainable transportation fuel alternative for decreasing reliance on crude oil, mitigating greenhouse gas emissions, creating new manufacturing jobs, and enhancing national energy security. Since sugar costs usually account for at least 50% of biofuels’ selling prices, it is vital to produce desired biofuels with high product yields and at low production costs. Here I suggest high-product yield and potentially low-cost biofuels production through cell-free synthetic enzymatic pathway biotransformation (SyPaB) by in vitro assembly of stable enzymes and (biomimetic) coenzymes. SyPaB can achieve high product yields or high energy efficiencies that living entities cannot achieve. Great potentials of SyPaB, from chiral compounds, biodegradable sugar batteries, sulfur-free jet fuel, hydrogen, sugar hydrogen fuel cell vehicles, high-density electricity storage, to synthetic starch...

Fusion of a family 9 cellulose-binding module improves catalytic potential of Clostridium thermocellum cellodextrin phosphorylase on insoluble cellulose

Clostridium thermocellum cellodextrin phosphorylase (CtCDP), a single-module protein without an apparent carbohydrate-binding module, has reported activities on soluble cellodextrin with a degree of polymerization (DP) from two to five. In this study, CtCDP was first discovered to have weak activities on weakly water-soluble celloheptaose and insoluble regenerated amorphous cellulose (RAC). To enhance its activity on solid cellulosic materials, four cellulose binding modules, e.g., CBM3 (type A) from C. thermocellum CbhA, CBM4-2 (type B) from Rhodothermus marinus Xyn10A, CBM6 (type B) from Cellvibrio mixtus Cel5B, and CBM9-2 (type C) from Thermotoga maritima Xyn10A, were fused to the C terminus of CtCDP. Fusion of any selected CBM with CtCDP did not influence its kinetic parameters on cellobiose but affected the binding and catalytic properties on celloheptaose and RAC differently. Among them, addition of CBM9 to CtCDP resulted in a 2.7-fold increase of catalytic efficiency for degrading celloheptaose. CtCDP-CBM9 exhibited enhanced specific activities over 20% on the short-chain RAC (DP = 14) and more than 50% on the long-chain RAC (DP = 164). The chimeric protein CtCDP-CBM9 would be the first step to construct a cellulose phosphorylase for in vitro hydrogen production from cellulose by synthetic pathway biotransformation (SyPaB).

Ultra‐stable phosphoglucose isomerase through immobilization of cellulose‐binding module‐tagged thermophilic enzyme on low‐cost high‐capacity cellulosic adsorbent

One-step enzyme purification and immobilization were developed based on simple adsorption of a family 3 cellulose-binding module (CBM)-tagged protein on the external surface of high-capacity regenerated amorphous cellulose (RAC). An open reading frame (ORF) Cthe0217 encoding a putative phosphoglucose isomerase (PGI, EC 5.3.1.9) from a thermophilic bacterium Clostridium thermocellum was cloned and the recombinant proteins with or without CBM were over-expressed in Escherichia coli. The rate constant (kcat ) and Michaelis-Menten constant (Km ) of CBM-free PGI at 60°C were 2,765 s(-1) and 2.89 mM, respectively. PGI was stable at a high protein concentration of 0.1 g/L but deactivated rapidly at low concentrations. Immobilized CBM (iCBM)-PGI on RAC was extremely stable at ∼60°C, nearly independent of its mass concentration in bulk solution, because its local concentration on the solid support was constant. iCBM-PGI at a low concentration of 0.001 g/L had a half-life time of 190 h, approximately 80-fold of that of free PGI. Total turn-over number of iCBM-PGI was as high as 1.1×10(9) mole of product per mole of enzyme at 60°C. These results suggest that a combination of low-cost enzyme immobilization and thermoenzyme led to an ultra-stable enzyme building block suitable for cell-free synthetic pathway biotransformation that can implement complicated biochemical reactions in vitro.

Renewable Hydrogen Carrier — Carbohydrate: Constructing the Carbon-Neutral Carbohydrate Economy

The hydrogen economy presents an appealing energy future but its implementation must solve numerous problems ranging from low-cost sustainable production, high-density storage, costly infrastructure, to eliminating safety concern. The use of renewable carbohydrate as a high-density hydrogen carrier and energy source for hydrogen production is possible due to emerging cell-free synthetic biology technology—cell-free synthetic pathway biotransformation (SyPaB). Assembly of numerous enzymes and co-enzymes in vitro can create complicated set of biological reactions or pathways that microorganisms or catalysts cannot complete, for example, C6H10O5 (aq) + 7 H2O (l) à 12 H2 (g) + 6 CO2 (g) (PLoS One 2007, 2:e456). Thanks to 100% selectivity of enzymes, modest reaction conditions, and high-purity of generated hydrogen, carbohydrate is a promising hydrogen carrier for end users. Gravimetric density of carbohydrate is 14.8 H2 mass% if water can be recycled from proton exchange membrane fuel cells or 8.33% H2 mass% without water recycling. Renewable carbohydrate can be isolated from plant biomass or would be produced from a combination of solar electricity/hydrogen and carbon dioxide fixation mediated by high-efficiency artificial photosynthesis mediated by SyPaB. The construction of this carbon-neutral carbohydrate economy would address numerous sustainability challenges, such as electricity and hydrogen storage, CO2 fixation and long-term storage, water conservation, transportation fuel production, plus feed and food production.

Toward low-cost biomanufacturing through in vitro synthetic biology: bottom-up design

While most in vitro synthetic biology projects are usually used for the purposes of basic science research or the formation of high-value products, cell-free synthetic pathway biotransformation (SyPaB), which can implement complicated biochemical reactions by the in vitro assembly of numerous enzymes and coenzymes, would be used for low-cost biomanufacturing. In this article, we present bottom-up design principles for SyPaB from basic building blocks (enzymes and/or immobilized enzymes) to basic modules, such as NAD(P)H regeneration, NAD(P)H consumption, ATP regeneration, and extra ATP removal. A combination of thermostable enzymes (called thermoenzymes) with immobilization on solid supports, especially nano-materials and/or electrodes, would greatly prolong enzyme lifetime, enhance mass transfer, and facilitate product/biocatalyst separation. With developments in stable building blocks and modules (called biocatalytic modules), SyPaB has the potential to become a low-cost biomanufacturing platform for biofuels production and even biological CO2 fixation.

Fructose-1,6-bisphosphatase from a hyper-thermophilic bacterium Thermotoga maritima: Characterization, metabolite stability, and its implications

Fructose-1,6-bisphosphatase gene from a hyperthermophilic bacterium Thermotoga maritima was cloned, and the recombinant protein was produced in E. coli, purified, and characterized. The fructose-1,6-bisphosphatase (FBPase) with a molecular mass of ca. 28 kDa was purified from the fusion protein cellulose-binding module (CBM)-intein-FBPase by affinity adsorption on regenerated amorphous cellulose followed by intein self-cleavage. The substrate fructose 1,6-bisphosphate was not stable at high temperatures, especially at high pHs. The degradation constants of fructose 1,6-bisphosphate, glucose-6-phosphate, and fructose-6-phosphate were determined at different temperatures (37, 60, and 80 °C) and pH 7.5 or 9.0. The k cat and K m values of FBPase were 8.57 s −1 and 0.04 mM at 60 °C, as well as 58.7 s −1 and 0.12 mM at 80 °C. This enzyme was very stable at its suboptimal temperatures, with half-life times of ca. 1330 and 55.6 h at 60 and 80 °C, respectively. At 60 °C, this enzyme had an estimated total turn-over number of 20,500,000 (mol product/mol enzyme) and weight-based total turn-over umber of 192,000 (kg product/kg enzyme), respectively. These results indicated that this enzyme would be a stable building block for cell-free synthetic pathway biotransformation (SyPaB) that can implement complicated biochemical reactions. In order to obtain high-yield desired products, we suggest that over-addition or over-expression of the enzymes responsible for converting easily degraded metabolites should be important to prevent unnecessary metabolite loss for in vitro or in vivo synthetic pathway design.