Synthetic Aperture Radar Datasets Research Articles

Satellite Geodesy Unveils a Decade of Summit Subsidence at Ol Doinyo Lengai Volcano, Tanzania

AbstractThe processing of hundreds of Synthetic Aperture Radar (SAR) images acquired by two satellite systems: Sentinel‐1 and COSMO‐SkyMed reveals a decade of ground deformation for a ∼0.5 km diameter area around the summit crater of the only active carbonatitic volcano on Earth: Ol Doinyo Lengai in Tanzania. Further decomposing ascending and descending orbits when the appropriate SAR data sets overlap allow us to interpret the imaged deformation as ground subsidence with a significant rate of ∼3.6 cm/yr for the pixels located just north of the summit crater. Using geodetic modeling and inverting the highest spatial resolution COSMO‐SkyMed data set, we show that the mechanism explaining this subsidence is most likely a deflating very shallow (≤1 km depth below the summit crater at the 95% confidence level) magma reservoir, consistent with geochemical‐petrological and seismo‐acoustic studies.

Synthetic Aperture Radar Image Change Detection Based on Principal Component Analysis and Two-Level Clustering

Synthetic aperture radar (SAR) change detection provides a powerful tool for continuous, reliable, and objective observation of the Earth, supporting a wide range of applications that require regular monitoring and assessment of changes in the natural and built environment. In this paper, we introduce a novel SAR image change detection method based on principal component analysis and two-level clustering. First, two difference images of the log-ratio and mean-ratio operators are computed, then the principal component analysis fusion model is used to fuse the two difference images, and a new difference image is generated. To incorporate contextual information during the feature extraction phase, Gabor wavelets are used to obtain the representation of the difference image across multiple scales and orientations. The maximum magnitude across all orientations at each scale is then concatenated to form the Gabor feature vector. Following this, a cascading clustering algorithm is developed within this discriminative feature space by merging the first-level fuzzy c-means clustering with the second-level neighbor rule. Ultimately, the two-level combination of the changed and unchanged results produces the final change map. Five SAR datasets are used for the experiment, and the results show that our algorithm has significant advantages in SAR change detection.

Immature characteristics of the East Anatolian Fault Zone from SAR, GNSS and strong motion data of the 2023 Türkiye–Syria earthquake doublet

On February 6, 2023, an Mw 7.9 earthquake occurred in the western section of the East Anatolia Fault Zone (EAFZ). It was subsequently followed by an Mw 7.7 earthquake on the northern branch of the EAFZ, known as the Sürgü Fault Zone. Coseismic deformation fields were derived for these earthquakes using joint evaluation of near-field strong motion data, Global Navigation Satellite System data, and Synthetic Aperture Radar datasets. The coseismic slip distribution model was determined through the joint kinematic finite fault inversion. The Mw 7.9 earthquake was a left-lateral strike-slip event, predominantly occurring at depths up to 20 km. The earthquake displayed three distinct asperities that correlate well with bends and stepovers along the EAFZ. The Mw 7.7 earthquake also exhibited left-lateral strike-slip characteristics, with a major asperity along the Çardak Fault featuring a maximum slip of approximately 9.5 m at depths between 0 and 24 km. The occurrence of this unanticipated large Mw 7.9 catastrophic seismic event on a fault with low-intermediate structural maturity is noteworthy. In the vicinity of immature faults with multiple jogs, stress tends to accumulate at barrier locations. When the accumulated stress near several adjacent barriers reaches a certain threshold, it may result in the transformation of multiple barriers into asperities, triggering cascading ruptures.

Detection and monitoring of mining-induced subsidence with Gaofen-3 and Sentinel-1A SAR datasets

ABSTRACT The mining-induced subsidence has caused severe casualties and poses a threat to the safe operation of coal extraction, especially under the roads, buildings and rivers. This alarming situation demands the large-area subsidence detection and the large-gradient deformation monitoring to ensure safety. Although the traditional Interferometric Synthetic Aperture Radar (InSAR) technology can monitor surface deformation in high accuracy, unfortunately, it often fails to recover the sufficient deformation when facing the effects of decorrelation and large gradient displacement. Therefore, this study firstly proposes a Stacking-InSAR and coherence gradient fusion method to detect the mining-induced subsidence over large area. Secondly, the robust offset tracking method is applied to retrieve the large-gradient deformation in Buertai mining site. Both Gaofen-3 and Sentinel-1A Synthetic Aperture Radar (SAR) datasets are acquired over the border of Shaanxi and Inner Mongolia, China, for experimental test. The results show that 179 mining-induced subsidence sites are detected with the proposed method, and the complete spatial temporal deformation fields are obtained by both Gaofen-3 and Sentinel-1A offset tracking method with maximum deformation of 3 m in range direction. This study provides a valuable tool for detecting the fine boundary of mining subsidence and recovering the accurate deformation time series.

R-LRBPNet: A Lightweight SAR Image Oriented Ship Detection and Classification Method

Synthetic Aperture Radar (SAR) has the advantage of continuous observation throughout the day and in all weather conditions, and is used in a wide range of military and civil applications. Among these, the detection of ships at sea is an important research topic. Ships in SAR images are characterized by dense alignment, an arbitrary orientation and multiple scales. The existing detection algorithms are unable to solve these problems effectively. To address these issues, A YOLOV8-based oriented ship detection and classification method using SAR imaging with lightweight receptor field feature convolution, bottleneck transformers and a probabilistic intersection-over-union network (R-LRBPNet) is proposed in this paper. First, a CSP bottleneck with two bottleneck transformer (C2fBT) modules based on bottleneck transformers is proposed; this is an improved feature fusion module that integrates the global spatial features of bottleneck transformers and the rich channel features of C2f. This effectively reduces the negative impact of densely arranged scenarios. Second, we propose an angle decoupling module. This module uses probabilistic intersection-over-union (ProbIoU) and distribution focal loss (DFL) methods to compute the rotated intersection-over-union (RIoU), which effectively alleviates the problem of angle regression and the imbalance between angle regression and other regression tasks. Third, the lightweight receptive field feature convolution (LRFConv) is designed to replace the conventional convolution in the neck. This module can dynamically adjust the receptive field according to the target scale and calculate the feature pixel weights based on the input feature map. Through this module, the network can efficiently extract details and important information about ships to improve the classification performance of the ship. We conducted extensive experiments on the complex scene SAR dataset SRSDD and SSDD+. The experimental results show that R-LRBPNet has only 6.8 MB of model memory, which can achieve 78.2% detection accuracy, 64.2% recall, a 70.51 F1-Score and 71.85% mAP on the SRSDD dataset.

A global patch similarity-based graph for unsupervised SAR image change detection

ABSTRACT This letter presents a novel method for synthetic aperture radar (SAR) image change detection using the global patch similarity-based graph (GPSG). First, the SAR image is divided into a number of square patches, which are then vectorized and stacked to form a global patch matrix (GPM). The GPSG is constructed by connecting the global similar patches that are selected through traversing the GPM. With the support of GPSG, the second-order random walk matrix is designed to widely aggregate the attributes of patches within the two-hop global neighbourhood. The difference image with good separability can be generated by comparing bitemporal patches and their aggregated attributes. Finally, the Otsu thresholding is adopted to obtain the change map showing changed and unchanged portions. Experiments conducted on three real SAR datasets demonstrate the superiority of the proposed GPSG method in terms of both robustness and accuracy for change detection.

Entropy-Based re-sampling method on SAR class imbalance target detection

Detection tasks based on Synthetic aperture radar (SAR) images have been studied widely but severely constrained by the quality of datasets. Meanwhile, both the unperceived category imbalance problem and SAR image discrepancy of multi-class SAR datasets are not fully considered. Researchers usually care about the foreground-background imbalance more than the class imbalance for SAR images. To solve these problems, an entropy-based re-sampling method is proposed in which category imbalance and quality discrepancies of SAR images are both considered. Initially, the relationship is established between variance-weighted image entropy and factors affecting SAR image quality, such as noise, resolution, and density, thereby validating entropy as a robust metric for image quality assessment. Subsequently, quantity penalty scores of categories and difficulty penalty scores of each image are calculated separately to capture the inter-class and intra-class disparities. Next, logarithmic smoothing is employed to avoid overestimation of image difficulty due to the margin effect. Finally, all these scores are combined to generate normalized scores representing the final distribution of the dataset to guide the training process. The proposed approach serves as a plug-and-play strategy for general SAR detection tasks, and experimental results indicate a significant performance improvement. Specifically, detection accuracy in terms of AP for airplanes and bridges (minority classes) in the MSAR dataset is improved by 16.6 % and 13.0 %, respectively, compared to the YOLOv5 baseline, with only a minimal 1.6 % sacrifice in ship detection (majority class). The datasets and the codes can be found at https://www.radars.ac.cn/web/data/getData?dataType=MSAR, https://github.com/Phoenix0qi/Yolov5-entropy-balance/tree/master.

SAR image classification using deep features and neighborhood heterogeneity confidence refined spatial constraints

ABSTRACT Recently, frameworks fusing the convolutional neural network (CNN) and Markov random field (MRF) models have been successfully used in synthetic aperture radar (SAR) image classification. Over-smoothing of the details and the incapability to eliminate regional-level misclassification are two common drawbacks of these frameworks, which are caused by the use of conventional neighbourhood consistency based spatial constraints. To address these problems, a neighbourhood heterogeneity confidence – Markov random field (NHC-MRF) and CNN-based framework is proposed for SAR image classification. In this framework, an NHC index is constructed in the binary energy function of the NHC-MRF to refine the conventional spatial constraints by adaptively allowing the existence of heterogeneity in the neighbourhood. The NHC index consists of a label coexisting probability term and a top-2 label term, which are constructed based on the outputs of the CNN. By using the label coexisting probability term, the details can be protected by allowing heterogeneity, and the regional-level misclassification can be eliminated by adjusting the impact of the neighbourhoods by using label coexisting probability based weighting. The top-2 label term is used as a correction of the coexisting probability term considering the disturbance of speckle noise. The NHC-MRF is further fused with a CNN by constructing the unary energy term and initial labels based on the outputs of the CNN. The effectiveness and superiority of the proposed framework are experimentally demonstrated using three SAR datasets. The experimental results demonstrate that the superiority of the NHC-MRF is derived from the simultaneous realization of retaining details and eliminating regional-level misclassification.

Flood Detection with SAR: A Review of Techniques and Datasets

Floods are among the most severe and impacting natural disasters. Their occurrence rate and intensity have been significantly increasing worldwide in the last years due to climate change and urbanization, bringing unprecedented effects on human lives and activities. Hence, providing a prompt response to flooding events is of crucial relevance for humanitarian, social and economic reasons. Satellite remote sensing using synthetic aperture radar (SAR) offers a great deal of support in facing flood events and mitigating their effects on a global scale. As opposed to multi-spectral sensors, SAR offers important advantages, as it enables Earth’s surface imaging regardless of weather and sunlight illumination conditions. In the last decade, the increasing availability of SAR data, even at no cost, thanks to the efforts of international and national space agencies, has been deeply stimulating research activities in every Earth observation field, including flood mapping and monitoring, where advanced processing paradigms, e.g., fuzzy logic, machine learning, data fusion, have been applied, demonstrating their superiority with respect to traditional classification strategies. However, a fair assessment of the performance and reliability of flood mapping techniques is of key importance for an efficient disasters response and, hence, should be addressed carefully and on a quantitative basis trough synthetic quality metrics and high-quality reference data. To this end, the recent development of open SAR datasets specifically covering flood events with related ground-truth reference data can support thorough and objective validation as well as reproducibility of results. Notwithstanding, SAR-based flood monitoring still suffers from severe limitations, especially in vegetated and urban areas, where complex scattering mechanisms can impair an accurate extraction of water regions. All such aspects, including classification methodologies, SAR datasets, validation strategies, challenges and future perspectives for SAR-based flood mapping are described and discussed.

An analysis of winter rain-on-snow climatology in Svalbard

Rain-on-snow (ROS) events are becoming an increasingly common feature of the wintertime climate Svalbard in the High Arctic due to a warming climate. Changes in the frequency, intensity, and spatial distribution of wintertime ROS events in Svalbard are important to understand and quantify due their wide-ranging impacts on the physical environment as well as on human activity. Due to the sparse nature of ground observations across Svalbard, tools for mapping and long-term monitoring of ROS events over large spatial areas are reliant on remote sensing, snow models and atmospheric reanalyses. However, different methods of identifying and measuring ROS events can often present different interpretations of ROS climatology. This study compares a recently published Synthetic Aperture Radar (SAR) based ROS dataset for Svalbard to ROS derived from two snow models and a reanalysis dataset for 2004–2020. Although the number of ROS events differs across the datasets, all datasets exhibit both similarities and differences in the geographical distribution of ROS across the largest island, Spitsbergen. Southern and western coastal areas experience ROS most frequently during the wintertime, with the early winter (November–December) experiencing overall most events compared to the spring (March–April). Moreover, we find that different temperature thresholds are required to obtain the best spatial agreement of ROS events in the model and reanalysis datasets with ground observations. The reanalysis dataset evaluated against ground observations was superior to the other datasets in terms of accuracy due to the assimilation of ground observations into the dataset. The SAR dataset consistently scored lowest in terms of its overall accuracy due to many more false detections, an issue which is most likely explained by the persistence of moisture in the snowpack following the end of a ROS event. Our study not only highlights some spatial differences in ROS frequency and trends but also how comparisons between different datasets can confirm knowledge about the climatic variations across Svalbard where in-situ observations are sparse.

Estimation of Aboveground Biomass for Different Forest Types Using Data from Sentinel-1, Sentinel-2, ALOS PALSAR-2, and GEDI

Forest aboveground biomass (AGB) is integral to the global carbon cycle and climate change study. Local and regional AGB mapping is crucial for understanding global carbon stock dynamics. NASA’s global ecosystem dynamics investigation (GEDI) and combination of multi-source optical and synthetic aperture radar (SAR) datasets have great potential for local and regional AGB estimation and mapping. In this study, GEDI L4A AGB data and ground sample plots worked as true AGB values to explore their difference for estimating forest AGB using Sentinel-1 (S1), Sentinel-2 (S2), and ALOS PALSAR-2 (PALSAR) data, individually and in their different combinations. The effects of forest types and different true AGB values for validation were investigated in this study, as well. The combination of S1 and S2 performed best in forest AGB estimation with R2 ranging from 0.79 to 0.84 and RMSE ranging from 7.97 to 29.42 Mg/ha, with the ground sample plots used as ground truth data. While for GEDI L4A AGB product working as reference, R2 values range from 0.36 to 0.47 and RMSE values range from 31.41 to 37.50 Mg/ha. The difference between using GEDI L4A and ground sample plot as reference shows obvious dependence on forest types. In summary, optical dataset and its combination with SAR performed better in forest AGB estimation when the average AGB is less than 150 Mg/ha. The AGB predictions from GEDI L4A AGB product used as reference underperformed across the different forest types and study sites. However, GEDI can work as ground truth data source for forest AGB estimation in a certain level of estimation accuracy.

An Improved Multi Target Ship Recognition Model Based on Deep Convolutional Neural Network

Deep learning is the major technique used to identify objects in images captured by the synthetic aperture radar (SAR). While SAR images can be used to identify ships in general, detecting multiple ships or small vessels in these images in complex contexts remains an outstanding challenge. This study proposes a model of detection based on the improved PP-YOLO deep convolutional neural network that can identify multiple ships as well as small vessels in complex scenarios from SAR images. The histogram equalization algorithm is first used to preprocess the SAR images, and then the initial anchor box is optimized by using the shape similarity distance-based K-means clustering algorithm. Following this, the accuracy of the training network is improved based on the feature pyramid network and an attention mechanism. The experimental results show that the average accuracy (average precision) of the model was 94.25% at 41.63 frames per second on the GF-3 and the Sentinel-1 SAR datasets, superior to those of YOLOv3 (Darknet), YOLOv7, FPN (VGG), SSD, Faster R-CNN, and PP-YOLO (RestNet50-vd). The model also satisfies the demands of real-time detection.

SAR marine oil spill detection based on an encoder-decoder network

ABSTRACT Marine oil spills are currently among the most challenging problems in marine environments. Synthetic Aperture Radar (SAR), with all-day and all-weather observation, has demonstrated great potential in oil disaster monitoring. A simple encoder-decoder network model was proposed by using SAR images for effective oil spill detection. The proposed model incorporates an optimized U-Net architecture that reduces computational requirements while maintaining detection performance. This is achieved through shortened encoder and decoder stages, depthwise separable convolutions, group normalization, and bilinear interpolation-based upsampling. To improve the model’s generalization, the auto-learning rate and focal loss function are also included. Two public SAR datasets acquired by different sensors have been used to illustrate the efficiency of the proposed model. In addition, the polarimetric information has also been assessed for the detection of oil spill monitoring. The results show that the model can achieve high efficiency at a small model size. The sub-dataset with polarimetric features also achieves a high F1-score of 91.65% and an IoU of 84.59%.

Gaussian meta-feature balanced aggregation for few-shot synthetic aperture radar target detection

Due to the high mobility and strong concealment characteristics of synthetic aperture radar (SAR) targets, the corresponding SAR datasets exhibit few-shot data properties, and there is a significant lack of research on few-shot target detection methods in the SAR domain. Furthermore, this study is subject to the following limitations: the scarcity of SAR data and significant sample variations make it difficult to control class centers using existing methods, and the learned models tend to be biased towards base classes while easily confusing novel classes with base classes. These limitations hinder the generalization of knowledge from base classes when detecting novel class targets. In this work, we propose a novel few-shot SAR target detection method based on Gaussian meta-feature balanced aggregation (GMFBA), which is based on meta-learning. Specifically, we first propose two novel feature aggregation methods with Gaussian metrics, namely Gaussian projection distribution metric (GPDM) and Gaussian kernel mean embedding metric (GKMEM). By estimating class distribution with variational autoencoders to replace traditional class prototypes, we sample from robust distributions and measure projection Wasserstein distance and Gaussian kernel mean embedding distance with prior distributions, obtaining the best robust support features under the optimal measurement results. Then, based on GPDM and GKMEM, we propose a novel balanced inter-class uncorrelated aggregation (BICUA) method, which extracts support features of each class according to the proportion of samples and aggregates them with query features in a balanced manner, promoting feature representation between different classes and ensuring no interference between features to significantly reduce confusion between base classes and novel classes. Specifically, GMFBA outperforms the state-of-the-art method G-FSOD significantly in all settings, achieving state-of-the-art performance. In contrast, the novel class detection performance of GMFBA has shown an average improvement of 8.56% on split1 and split2 of the SRSDD-v1.0 dataset, and an average improvement of 1.41% on split1 and split2 of the MSAR-1.0 dataset. The code is available at https://github.com/Caltech-Z/GMFBA.

Improving Coffee Yield Interpolation in the Presence of Outliers Using Multivariate Geostatistics and Satellite Data

Precision agriculture for coffee production requires spatial knowledge of crop yield. However, difficulties in implementation lie in low-sampled areas. In addition, the asynchronicity of this crop adds complexity to the modeling. It results in a diversity of phenological stages within a field and also continuous production of coffee over time. Big Data retrieved from remote sensing can be tested to improve spatial modeling. This research proposes to apply the Sentinel-2 vegetation index (NDVI) and the Sentinel-1 dual-polarization C-band Synthetic Aperture Radar (SAR) dataset as auxiliary variables in the multivariate geostatistical modeling of coffee yield characterized by the presence of outliers and assess improvement. A total of 66 coffee yield points were sampled from a 4 ha area in a quasi-regular grid located in southeastern Brazil. Ordinary kriging (OK) and block cokriging (BCOK) were applied. Overall, coupling coffee yield with the NDVI and/or SAR in BCOK interpolation improved the accuracy of spatial interpolation of coffee yield even in the presence of outliers. Incorporating Big Data for improving the modeling for low-sampled fields requires taking into account the difference in supports between different datasets since this difference can increase uncontrolled uncertainty. In this manner, we will consider, for future research, new tests with other covariates. This research has the potential to support precision agriculture applications as site-specific plant nutrient management.

Conditional Generative Adversarial Networks for SAR-based Ocean Feature Monitoring

Ocean surface monitoring, detection of oil spills, and accurate maritime vehicle detection is an important set of problem statements associated with ocean pollution monitoring. This paper proposes a novel study on Pix2Pix or generative adversarial networks for the aforementioned task. A comparative analysis is presented on various convolutional network-based encoders for semantic segmentation. A publicly available Synthetic Aperture Radar (SAR) dataset from the Sentinel-1 C-band sensor is used, constituting a total of 1112 images for the task of multiclass segmentation. Each integrant image pixel is classified into five classes, Oil Spills, Ships, Look-Alikes, Land Surface, and Ocean Surface. Deep architectures like U-Nets, SegNets, LinkNets, and FCNs are thoroughly assessed to obtain a practical analysis of this approach. Through a systematic exploration of hyperparameters, we identified the best-performing encoder configuration, achieving impressive results with a weighted Mean IoU of 0.898 and an F1-score of 0.931. These findings hold great promise for the advancement of solutions in ocean pollution monitoring, contributing to more accurate and efficient detection and mitigation efforts. respectively.

Coniferous Forests Aboveground Biomass Inversion in Typical Regions of China with Joint Sentinel-1 and Sentinel-2 Remote Sensing Data Supported by Different Feature Optimizing Algorithms

Multispectral remote sensing (RS) data and synthetic aperture radar (SAR) data can provide horizontal and vertical information about forest AGB under different stand conditions. With the abundance of RS features extracted from multispectral and SAR datasets, a key point for accurate forest AGB estimation is to use suitable feature optimization inversion algorithms. In this study, feature optimization inversion algorithms including multiple linear stepwise regression (MLSR), K-nearest neighbor with fast iterative feature selection (KNN-FIFS), and random forest (RF) were explored, with a total of 93 RS features working as inversion model input for forest AGB inversion. The results showed that KNN-FIFS with the combination of Sentinel-1 and Sentinel-2 performed best at both test sites (R2 = 0.568 and RMSE = 15.05 t/hm2 for Puer and R2 = 0.511 and RMSE = 32.29 t/hm2 for Genhe). Among the three feature optimization inversion algorithms, RF performed worst for forest AGB estimation with R2 = 0.348 and RMSE = 18.06 t/hm2 for Puer and R2 = 0.345 and RMSE = 35.98 t/hm2 for Genhe using the feature combination of Sentinel-1 and Sentinel-2. The results indicated that a combination of features extracted from Sentinel-1 and Sentinel-2 can improve the inversion accuracy of forest AGB, and the KNN-FIFS algorithm has robustness and transferability in forest AGB inversions.

A machine learning-based method for multi-satellite SAR data integration

Large- and small-scale subsidence coexist in the world's coastal cities due to extensive land reclamation and fast urbanization. Synthetic aperture radar (SAR) images are typically limited by either low resolution or small coverage, making them ineffective for fully monitoring displacement in coastal areas. In this research, a machine learning-based method is developed to investigate the reclaimed land subsidence based on multi-satellite SAR data integration. The proposed method requires at least a pair of SAR images from complementary tracks. First, the line-of-sight (LOS) displacements are recovered in connection to a series of extremely coherent points based on the differential interferometry synthetic aperture radar (DInSAR). These LOS displacements are then converted into their vertical component, geocoded to a common grid, and simultaneously integrated (i.e., pixel-by-pixel) based on Support Vector Regression (SVR). The proposed methodology does not necessitate the simultaneous processing of huge DInSAR interferogram sequences. The experiments include high-resolution COSMO-SkyMed (CSK) and TerraSAR-X (TSX) images, as well as a small monitoring cycle Sentinel-1 (S1) images of reclaimed territories near Hong Kong Kowloon City. The overall average annual displacement (AAD) ranges from -12.86 to 11.63 mm/year derived from 2008 to 2019. The evaluation metrics including RMSE, MAE, correlation coefficient, and R-squared are used to investigate the impact of SVR in the integration of SAR datasets. Based on these evaluation metrics, SVR is superior in terms of integration performance, accuracy, and generalization ability. Thus, the proposed method has potentially performed multi-satellite SAR data integration.

A FULLY CONNECTED CHANGE DETECTION METHOD OF SAR IMAGES FUSING ORIGINAL IMAGE FEATURES AND CHANGE DETECTION RESULTS

Abstract. The primary strategy to eliminate the effect of scatter noise in synthetic aperture radar (SAR) imagery is usually through filtering or combining neighborhood information. However, both approaches to reducing noise reduce the detection accuracy of change edges with similar characteristics to scatter noise points. Considering the above problems, this letter proposes a post-processing method that applies a fully connected conditional random field theoretical model to fuse the original image information with the initial change detection results. The method first takes the original image information and the initial change detection results as a priori conditions. Secondly, the global spatial information in the original image and the label values in the initial change detection results are fully considered when detecting the changed and unchanged pixels to establish a fully connected relationship between all the pixels and find the label distribution probability of each pixel under the condition of noise suppression, and finally obtain better change detection results. The experimental results on the real SAR dataset confirm the proposed method's effectiveness, robustness, and efficiency.

Random forest and support vector machine classifiers for coastal wetland characterization using the combination of features derived from optical data and synthetic aperture radar dataset

Abstract Mapping mangrove forests is crucial for their conservation, but it is challenging due to their complex characteristics. Many studies have explored machine learning techniques that use Synthetic Aperture Radar (SAR) and optical data to improve wetland classification. This research compares the random forest (RF) and support vector machine (SVM) algorithms, employing Sentinel-1 dual polarimetric C-band data and Sentinel-2 optical data for mapping mangrove forests. The study also incorporates various derived parameters. The Jeffries–Matusita distance and Spearman’s rank correlation are used to evaluate the significance of commonly used spectral indices and SAR parameters in wetland classification. Only significant parameters are retained, reducing data dimensionality from 63 initial features to 23–33 essential features, resulting in an 18% improvement in classification accuracy. The combination of SAR and optical data yields a substantial 33% increase in the overall accuracy for both SVM and RF classification. Consistently, the fusion of SAR and optical data produces higher classification accuracy in both RF and SVM algorithms. This research provides an effective approach for monitoring changes in Pichavaram wetlands and offers a valuable framework for future wetland monitoring, supporting the planning and sustainable management of this critical area.