Synthetic Aperture Radar Backscatter Research Articles

Estimation of Forest Growing Stock Volume with Synthetic Aperture Radar: A Comparison of Model-Fitting Methods

Satellite-based estimation of forest variables including forest biomass relies on model-based approaches since forest biomass cannot be directly measured from space. Such models require ground reference data to adapt to the local forest structure and acquired satellite data. For wide-area mapping, such reference data are too sparse to train the biomass retrieval model and approaches for calibrating that are independent from training data are sought. In this study, we compare the performance of one such calibration approach with the traditional regression modelling using reference measurements. The performance was evaluated at four sites representative of the major forest biomes in Europe focusing on growing stock volume (GSV) prediction from time series of C-band Sentinel-1 and Advanced Land Observing Satellite Phased Array L-band Synthetic Aperture Radar (ALOS-2 PALSAR-2) backscatter measurements. The retrieval model was based on a Water Cloud Model (WCM) and integrated two forest structural functions. The WCM trained with plot inventory GSV values or calibrated with the aid of auxiliary data products correctly reproduced the trend between SAR backscatter and GSV measurements across all sites. The WCM-predicted backscatter was within the range of measurements for a given GSV level with average model residuals being smaller than the range of the observations. The accuracy of the GSV estimated with the calibrated WCM was close to the accuracy obtained with the trained WCM. The difference in terms of root mean square error (RMSE) was less than 5% units. This study demonstrates that it is possible to predict biomass without providing reference measurements for model training provided that the modelling scheme is physically based and the calibration is well set and understood.

Estimating mean groundwater levels in peatlands using a Bayesian belief network approach with remote sensing data

Large-scale management, protection, and restoration of wetlands require knowledge of their hydrology, i.e., the status and dynamics of the groundwater table, which determine the evolution of the wetland ecosystem, its conservation value, and possible economic use. Unfortunately, in many cases, hydrological monitoring data are unavailable, resulting in the search for a proxy for the average annual depth of the groundwater level (GWL). This study presents an approach to estimating the mean GWL in peatlands using a Bayesian belief network (BBN) model, leveraging long-term hydrological and remote sensing data in the Biebrza National Park in Poland. The remote sensing data employed includes the synthetic aperture radar (SAR) backscatter coefficient, peat subsidence, rate and distance to watercourses. The BBN model achieved a predictive accuracy of 83.3% and 73.1%, depending on the validation approach used. Among the remote sensing variables considered, the SAR backscatter coefficient was the most sensitive in predicting the GWL in the peatlands. However, the model presents multiple uncertainties resulting from limitations of the available remote sensing data, low variability of class combinations in the conditional probability table, and lack of upscaling to other regions performed. Despite these uncertainties, the developed BBN model remains a valuable next step in reaching the goal of efficient peatland monitoring and management.

Incidence angle dependency and seasonal evolution of L and C-band SAR backscatter over landfast sea ice

Abstract We estimate sea-ice type specific incidence angle (IA) dependencies for dual polarized (HH/HV) L and C-band synthetic aperture radar (SAR) for the winter, melt onset and advanced melt seasons for level and deformed ice, using time-series of Advanced Land Observing Satellite-2 (ALOS-2) and Sentinel-1 imagery off the north-east coast of Greenland. The IA dependencies are used to radiometrically correct the L and C-band backscatter time-series, which enables analysis of their seasonal evolution. From this, we observe that the L-band backscatter intensity increases for both ice types at the transition from winter to melt onset. We use these results to estimate ice type separability and to train an IA aware Bayesian classifier at both frequencies. These results show that while both frequencies are capable of distinguishing level and deformed ice during the winter, only L-band SAR can reliably make this separation during the melt onset season. During the advanced melt season, the overall classification accuracies are similarly low for L and C-band. This study demonstrates the potential of L-band SAR for sea-ice mapping, which is highly relevant in the light of several upcoming L-band SAR missions.

Design and performance of the Climate Change Initiative Biomass global retrieval algorithm

The increase in Earth observations from space in recent years supports improved quantification of carbon storage by terrestrial vegetation and fosters studies that relate satellite measurements to biomass retrieval algorithms. However, satellite observations are only indirectly related to the carbon stored by vegetation. While ground surveys provide biomass stock measurements to act as reference for training the models, they are sparsely distributed. Here, we addressed this problem by designing an algorithm that harnesses the interplay of satellite observations, modeling frameworks and field measurements, and generated global estimates of above-ground biomass (AGB) density that meet the requirements of the scientific community in terms of accuracy, spatial and temporal resolution. The design was adapted to the amount, type and spatial distribution of satellite data available around the year 2020. The retrieval algorithm estimated AGB annually by merging estimates derived from C- and L-band Synthetic Aperture Radar (SAR) backscatter observations with a Water Cloud type of model and does not rely on AGB reference data at the same spatial scale as the SAR data. This model is integrated with functions relating to forest structural variables that were trained on spaceborne LiDAR observations and sub-national AGB statistics. The yearly estimates of AGB were successively harmonized using a cost function that minimizes spurious fluctuations arising from the moderate-to-weak sensitivity of the SAR backscatter to AGB. The spatial distribution of the AGB estimates was correctly reproduced when the retrieval model was correctly set. Over-predictions occasionally occurred in the low AGB range (<50 Mg ha−1) and under-predictions in the high AGB range (>300 Mg ha−1). These errors were a consequence of sometimes too strong generalizations made within the modeling framework to allow reliable retrieval worldwide at the expense of accuracy. The precision of the estimates was mostly between 30% and 80% relative to the estimated value. While the framework is well founded, it could be improved by incorporating additional satellite observations that capture structural properties of vegetation (e.g., from SAR interferometry, low-frequency SAR, or high-resolution observations), a dense network of regularly monitored high-quality forest biomass reference sites, and spatially more detailed characterization of all model parameters estimates to better reflect regional differences.

Aboveground Biomass Mapping in SemiArid Forests by Integrating Airborne LiDAR with Sentinel-1 and Sentinel-2 Time-Series Data

Aboveground biomass (AGB) is a vital indicator for studying carbon sinks in forest ecosystems. Semiarid forests harbor substantial carbon storage but received little attention due to the high spatial–temporal heterogeneity that complicates the modeling of AGB in this environment. This study assessed the performance of different data sources (annual monthly time-series radar was Sentinel-1 [S1]; annual monthly time series optical was Sentinel-2 [S2]; and single-temporal airborne light detection and ranging [LiDAR]) and seven prediction approaches to map AGB in the semiarid forests on the border between Gansu and Qinghai Provinces in China. Five experiments were conducted using different data configurations from synthetic aperture radar backscatter, multispectral reflectance, LiDAR point cloud, and their derivatives (polarimetric combination indices, texture information, vegetation indices, biophysical features, and tree height- and canopy-related indices). The results showed that S2 acquired better prediction (coefficient of determination [R2]: 0.62–0.75; root mean square error [RMSE]: 30.08–38.83 Mg/ha) than S1 (R2: 0.24–0.45; RMSE: 47.36–56.51 Mg/ha). However, their integration further improved the results (R2: 0.65–0.78; RMSE: 28.68–35.92 Mg/ha). The addition of single-temporal LiDAR highlighted its structural importance in semiarid forests. The best mapping accuracy was achieved by XGBoost, with the metrics from the S2 and S1 time series and the LiDAR-based canopy height information being combined (R2: 0.87; RMSE: 21.63 Mg/ha; relative RMSE: 14.45%). Images obtained during the dry season were effective for AGB prediction. Tree-based models generally outperformed other models in semiarid forests. Sequential variable importance analysis indicated that the most important S1 metric to estimate AGB was the polarimetric combination indices sum, and the S2 metrics were associated with red-edge spectral regions. Meanwhile, the most important LiDAR metrics were related to height percentiles. Our methodology advocates for an economical, extensive, and precise AGB retrieval tailored for semiarid forests.

Monthly Monitoring of Inundated Areas and Water Storage Dynamics in China's Large Reservoirs Using Multisource Remote Sensing

AbstractHigh‐frequency monitoring of reservoir inundation and water storage changes is crucial for reservoir functionality assessment and hydrological model calibration. Although the integration of optical data with synthetic aperture radar (SAR) backscattering coefficients (backscatters) offers an effective approach, conventional methods struggle to consistently provide accurate retrievals over diverse regions and seasons. In this study, we introduce reservoir‐ and monthly‐specific classification models to enhance the integration of Sentinel‐1 SAR backscatters with optical‐based water dynamics. Our method covers 721 reservoirs with a capacity greater than 0.1 km3 in China during 2017–2021. Furthermore, we leverage multisource satellite altimetry records (e.g., ICESat‐2, CryoSat‐2, and GEDI) and digital elevation models to derive hypsometry relationship (i.e., water level–water area relationship) for reservoirs, enabling the transformation of inundated areas into monthly water storage changes for 662 reservoirs, representing 93% of the total storage capacity of large reservoirs. Validation against in‐situ measurements at 80 reservoirs reveals improved monthly inundated area monitoring compared to existing data sets. Additionally, our reservoir water storage change estimates exhibit an average R2 of 0.79 and a mean relative root mean square error (rRMSE) of 21%. Our findings highlight reservoir water increases from May/June to November and declines in winter–spring in most regions. However, the inter‐annual patterns vary among regions, with increases in Northeast China, the Yellow River basin (YR), and Southwest China, contrasted by declines in Eastern and Northwest China. Inter‐ and intra‐annual variability in reservoir water storage is mainly influenced by natural inflow in Northeast and Northwest China, while anthropogenic factors dominate in the YR, Eastern, and Southwest China.

Mapping Ratoon Rice Fields Based on SAR Time Series and Phenology Data in Cloudy Regions

Ratoon rice (RR) has emerged as an active adaptation to climate uncertainty, stabilizing total paddy rice yield and effectively reducing agriculture-related ecological environmental issues. However, identifying key remote sensing parameters for RR under cloudy and foggy conditions is challenging, and existing RR monitoring methods in these regions face significant uncertainties. Here, given the sensitivity of synthetic aperture radar (SAR) backscattering signals to the crop phenological period, this paper introduces a threshold model utilizing Sentinel-1A SAR data and phenological information for mapping RR. The Yongchuan District of Chongqing, which is often cloudy and foggy, was selected as a specific study region where VH-polarized backscatter coefficients of Sentinel-1 images were obtained at 10 m spatial resolution in 2020. Based on the proposed threshold model, the RR extraction overall accuracy was up to 90.24%, F1 score was 0.92, and Kappa coefficient was 0.80. Further analysis showed that the extracted RR boundaries exhibited high consistency with true Sentinel-2 remote sensing images and the RR extracted area was in good agreement with the actual planted area situation. This threshold model demonstrated good applicability in the studied cloudy and foggy region, and successfully distinguished RR from other paddy rice types. The methodological framework established in this study provides a basis for extensive application in China and other significant RR-producing regions globally.

Surface primary producer phenology in Dease Strait, NU, Canada, examined using submersed oceanographic sensors and satellite remote sensing

Thinning sea ice cover and earlier melt in the Arctic impact primary producer (PP) phenology, causing earlier ice algal bloom termination and phytoplankton bloom commencement. However, logistic constraints limit capturing the complete seasonal evolution of PPs and their physical drivers. Here, we combine spectral irradiance data from subsurface oceanographic moorings with synthetic aperture radar backscatter and meteorological variables to study light in Dease Strait, investigating its relation to timing and magnitude of surface PPs for 2017 and 2019. Ice algal blooms in 2017 and 2019 lasted 66 and 84 days, respectively, peaking within 2 days of snow melt onset. In 2019, lower temperatures and a deeper snowpack before snow melt extended the ice algal bloom. Melt pond formation increased light transmission, enabling a short, 6–7-day under-ice phytoplankton bloom in both years that was likely nutrient-limited. The 2019 phytoplankton bloom was less productive, possibly due to the longer ice algal bloom depleting surface nutrients. After ice break-up in 2019, a 31-day late-summer bloom occurred via wind-driven mixing. Our findings suggest that the combined remote sensing technique has novel applicability in other settings, providing insights into the changing state of PP phenology, and the need for long-term Arctic observations to discern regional climate change effects.

Analysis of the relationship between L-band SAR backscatter and understory weed density in eucalyptus plantation forests

ABSTRACT This study aims to reveal the relationships between understory coverage (principally, weed growth) beneath the canopies of Sumatran eucalyptus plantations and L-band backscatter data gathered by the PALSAR-2 Synthetic Aperture Radar (SAR) onboard the ALOS-2 satellite. Statistical analysis in conjunction with in situ measurements of forest structural parameters reveals that the SAR polarization ratio is significantly negatively correlated with understory coverage in forests taller than or equal to 10 m or above 2 years of age. Our field investigations confirm that a decrease in canopy coverage takes place some 2 years after transplanting, which in turn permits increased penetration (decreased attenuation) of microwave signals thereby enabling the SAR to detect changes in understory coverage. In addition, both growth and unmanaged remnants of the understory vegetation in older forests reduce evaporation from the ground, which in turn stabilizes soil-moisture levels throughout the year and allows co-polarized backscatter data (which might otherwise be dominated by soil-moisture changes) to contain significant information on the underlying vegetation. No correlation between the understory and SAR backscatter was recorded in younger forests undergoing programs of intensive weed management. This is presumably because strong canopy and trunk backscatter obscured the response from understory vegetation and because artificial changes were induced in vegetation water content as a result of the application of herbicides which in turn reduced the accuracy of some of our field measurements of understory coverage. This research nevertheless demonstrates an important potential application of active satellite microwave remote sensing. We show that satellite-based L-band SAR can be used as a tool to investigate coverage percentages of understory layers. This synoptic technique reduces the need for repeated field surveys across large areas of forest. It can enhance ecosystem assessment and improve understory coverage estimates in sparse forests and in various types of plantations.

The potential of optical and SAR time-series data for the improvement of aboveground biomass carbon estimation in Southwestern China’s evergreen coniferous forests

ABSTRACT Accurate assessments of forest biomass carbon are invaluable for managing forest resources, evaluating effects on ecological protection, and achieving goals related to climate change and sustainable development. Currently, the integration of optical and synthetic aperture radar (SAR) data has been extensively utilized in estimating forest aboveground biomass carbon (AGC), while it is limited by using single-phase remote sensing images. Time-series data, which capture the interannual dynamic growth and seasonal variations of photosynthetic phenology in forests, can sufficiently describe forest growth characteristics. However, there remains a gap in research focusing on utilizing satellite-based time-series data for AGC estimation, especially for SAR sensors. This study investigated the potential of satellite-based optical and SAR time-series data for estimating AGC. Here, we undertook nine quantitative experiments of AGC estimation from Landsat 8 and Sentinel-1 and tested several regression algorithms (including multiple linear regression (MLR), random forests (RF), artificial neural network (ANN), and extreme gradient boosting (XGBoost)) to explore the contributions of spatiotemporal features to AGC estimation. The results suggested that the XGBoost algorithm was suitable for AGC estimation with explanatory solid power and stable performance. The temporal features representing forest growth trends and periodic change characteristics (such as coefficients of continuous wavelet transform) were more valuable for AGC estimation than spatial features for both sensor types, accounting for around 40% ~50% of the variance compared to 17% ~25%. The combination of optical and SAR time-series data produced the best performance (R2 = 0.814, RMSE = 18.789 Mg C/ha, rRMSE = 26.235%), compared with when utilizing optical or SAR time-series data alone (optical: R2 of 0.657 and rRMSE of 35.317%; SAR: R2 of 0.672 and rRMSE of 34.701%). Feature importance analysis also verified that temporal features of optical vegetation indices, SWIR 1/2 bands, and SAR backscatter from VV polarization were the most critical variables for AGC estimation. Furthermore, incorporating temporal features into the modeling is illustrated to be effective in reducing saturation effects within high-biomass forests. This study demonstrated the superiority of time-series data for forest carbon estimation. While the applicability of this methodology has only been investigated in evergreen coniferous forests, it may provide a viable approach needed to make full use of increasingly better and free satellite time-series data to estimate forest AGC with high accuracy, supporting policy making of forest management and sustainable development.

Interacting Sentinel-2A, Sentinel 1A, and GF-2 Imagery to Improve the Accuracy of Forest Aboveground Biomass Estimation in a Dry-Hot Valley

Carbon absorption and storage in forests is one of the important ways to mitigate climate change. Therefore, it is essential to use a variety of remote-sensing resources to accurately estimate forest aboveground biomass (AGB) in dry-hot valley regions. In this study, satellite images from the Sentinel-1A, Sentinel-2A, and Gaofen-2 satellites were utilized to estimate the forest AGB in Yuanmou County, Yunnan Province, China. Different combinations of image data, based on selected variables of stepwise regression and their performance in constructing linear stepwise regression (LSR) and random forest (RF) models, were explored. The results showed that: (1) after adding the polarized values of the synthetic aperture radar backscatter coefficients, the combination fitting effect was significantly improved; (2) the fitting effect of the Sentinel-1A + Sentinel-2A + Gaofen-2 data combination was superior to the other combinations, indicating that the effective extraction of forest horizon and vertical information can improve the estimation effect of the forest AGB; and (3) the RF model exhibited superior fitting performance compared to the LSR model across all permutations of remotely sensed image datasets, with R2 values of 0.71 and 0.65, and RMSE values of 30.67 and 33.79 Mg/ha, respectively. These findings lay the groundwork for enhancing the precision of AGB estimation in dry-hot valley areas by integrating Sentinel-2A, Sentinel-1A, and GF-2 imagery, providing valuable insights for future research and applications.

Synthetic aperture radar backscatter is influenced by bubbles at the ice/water interface of an Antarctic lake

Synthetic aperture radar is an invaluable tool for monitoring lake ice. This study utilizes synthetic aperture radar to analyze the 2019-2023 backscatter time series of perennially ice-covered Lake Untersee in East Antarctica. We observed stark seasonal backscatter variations, averaging –9.6 dB from December to March and –3.7 dB from May to November. These fluctuations correspond to the abundance of sub-centimeter bubbles at the ice/water interface. Notably, the backscatter increase in April-May aligns closely with variations in ice thickness across the lake. Our findings suggest that ice cover thickness influences the timing and duration of ice accretion at the bottom, the accumulation of dissolved gases and bubbles, and the resultant changes in surface roughness at the ice/water interface. These factors collectively impact the backscatter response. This study enhances our understanding of the interactions between subsurface processes and synthetic aperture radar backscatter, shedding light on the seasonal dynamics of perennially ice-covered lakes.

CROP HEIGHT ESTIMATION OF WHEAT USING SENTINEL-1 SATELLITE IMAGERY: PRELIMINARY RESULTS

Abstract. Wheat is one of the primary crop productions for half of the global production. It is the most exported cereal, which reached up to 40% according to the records of the Food and Agriculture Organization of the United Nations (FAO) in 2020. The relationship between the crop parameters and remote sensing tools has become essential for the temporal monitoring and estimations of crop growth. In this study, we investigate the relationship between crop height and Synthetic Aperture Radar (SAR) backscatter. Plant height was collected twice, in the early (13 April 2023) and late stages (21 June 2023) of wheat, for a total of 70 samples. Sentinel-1 SAR data was also attempted to be synchronized with ground measurements. For this purpose, 8 images were obtained, 4 in both ascending (8 and 15 April, 16 and 26 June) and descending (9 and 14 April, 20 and 25 June) directions. The basic steps of image pre-processing, calibration, filtering, and topography correction, were applied to each image. By evaluating the correlation coefficients between plant height and images, data with low correlations were excluded and the first three data, dated 8 April and 19 June, were used for plant height estimation. For prediction purposes, Linear Regression (LR) and Random Forest (RF) methods were evaluated with three different training data sets. The highest correlation and minimum error value were achieved by VH polarization with random forest (r = 0.868, RMSE = 5.377 cm) in the early stage and LR (r = 0.616, RMSE = 14.451 cm) in the late stage. In general, higher training (80%) and lower test data (20%) produced better results.

The Biomass Proxy: Unlocking Global Agricultural Monitoring through Fusion of Sentinel-1 and Sentinel-2

The Biomass Proxy is a new cloud-free vegetation monitoring product that offers timely and analysis-ready data indicative of above-ground crop biomass dynamics at 10m spatial resolution. The Biomass Proxy links the consistent and continuous temporal signal of the Sentinel-1 Cross Ratio (CR), a vegetation index derived from Synthetic Aperture Radar backscatter, with the spatial information of the Sentinel-2 Normalized Difference Vegetation Index (NDVI), a vegetation index derived from optical observations. A global scaling relationship between CR and NDVI forms the basis of a novel fusion methodology based on static and dynamic combinations of temporal and spatial responses of CR and NDVI at field level. The fusion process is used to mitigate the impact on product quality of low satellite revisit periods due to acquisition design or persistent cloud coverage, and to respond to rapid changes in a timely manner to detect environmental and management events. The resulting Biomass Proxy provides time series that are continuous, unhindered by clouds, and produced uniformly across all geographical regions and crops. The Biomass Proxy offers opportunities including improved crop growth monitoring, event detection, and phenology stage detection.

Estimating vegetation water content from Sentinel-1 C-band SAR data over savanna and grassland ecosystems

Studying vegetation water content (VWC) dynamics is essential for understanding plant growth, water and carbon cycles, and ecosystem stability. However, acquiring field-based VWC estimates, consistently through space and time, is challenging due to time and resource constraints. This study investigates the potential of Sentinel-1 C-band Synthetic Aperture Radar (SAR) data for estimating VWC in natural ecosystems in central Brazil. We assessed (i) how well Sentinel-1 SAR data can capture variations in VWC over three different vegetation types (i.e. dry and waterlogged grasslands, and savannas) and (ii) how the studied vegetation types respond to seasonal dry periods in terms of water content. Field data from 82 plots, distributed across the three vegetation types and revisited in four different seasons, were used to calibrate and validate a model for VWC estimation. The calibrated model, with an R 2 of 0.52 and RMSE of 0.465 kg m−2, was then applied to Sentinel-1 SAR backscatter data to generate monthly VWC maps for grassland and savanna ecosystems at 30 m spatial resolution between April 2015 and September 2023. These maps, combined with rainfall and potential evapotranspiration data, provided insights into how the studied vegetation types respond to water shortage during the dry season at the community scale. More specifically, savannas showed to be better able to retain higher levels of water content during the dry season, probably due to a higher water holding capacity of the woody component together with its deep-root system ability to access deeper groundwater. This research demonstrates the potential of Sentinel-1 SAR data for monitoring VWC in natural ecosystems, allowing for future studies to assess ecosystems’ response to drought events and changes in their functioning, ultimately supporting land management decisions.

X- and Ku-Band SAR Backscattering Signatures of Snow-Covered Lake Ice and Sea Ice

In this work, backscattering signatures of snow-covered lake ice and sea ice from X- and Ku-band synthetic aperture radar (SAR) data are investigated. The SAR data were acquired with the ESA airborne SnowSAR sensor in winter 2012 over Lake Orajärvi in northern Finland and over landfast ice in the Bay of Bothnia of the Baltic Sea. Co-incident with the SnowSAR acquisitions, in situ snow and ice data were measured. In addition, time series of TerraSAR-X images and ice mass balance buoy data were acquired for Lake Orajärvi in 2011–2012. The main objective of our study was to investigate relationships between SAR backscattering signatures and snow depth over lake and sea ice, with the ultimate objective of assessing the feasibility of retrieval of snow characteristics using X- and Ku-band dual-polarization (VV and VH) SAR over freshwater or sea ice. This study constitutes the first comprehensive survey of snow backscattering signatures at these two combined frequencies over both lake and sea ice. For lake ice, we show that X-band VH-polarized backscattering coefficient (σo) and the Ku-band VV/VH-ratio exhibited the highest sensitivity to the snow depth. For sea ice, the highest sensitivity to the snow depth was found from the Ku-band VV-polarized σo and the Ku-band VV/VH-ratio. However, the observed relations were relatively weak, indicating that at least for the prevailing snow conditions, obtaining reliable estimates of snow depth over lake and sea ice would be challenging using only X- and Ku-band backscattering information.

Evaluation of limiting factors for SAR backscatter based cut detection of alpine grasslands

Several studies utilized C-band Synthetic Aperture Radar (SAR) backscatter time series to detect cut events of grasslands. They identified several potential factors hindering the detection: Vegetation characteristics, precipitation, and the timing of salvage of the harvested grass. This study uses a comprehensive in situ database to assess the impact of those factors on the detection rate of cut events by performing a cut detection based on Sentinel-1 backscatter time series and relating the accuracy to the potentially limiting factors. The results can be summarized in the following key findings: (i) The detection rate decreases significantly with grass heights below 35 cm and a biomass of less than 2100 kg/ha. As the grass of the first growth is typically characterized by greater height and higher biomass, first cuts achieved a higher accuracy with 85% compared to re-growth cuts with 65%. (ii) False positive cut events were related to higher precipitation amounts, but adding precipitation data to the model led only to a slight increase of the accuracy of re-growth cuts, but a decrease of the overall accuracy. (iii) No relation was found between the timing of salvage and the backscatter behaviour. These insights contribute to a better utilization of C-band backscatter for vegetation analysis and agricultural applications, including cut detection. Further research with dense in situ measurements, including Vegetation Water Content (VWC) is required to fully understand the behaviour of C-band backscatter over managed grasslands.

Reconstructing Long-Term Synthetic Aperture Radar Backscatter in Urban Domains Using Landsat Time Series Data: A Case Study of Jing–Jin–Ji Region

Synthetic aperture radar (SAR) records important information about the interaction of electromagnetic waves with the Earth’s surface. However, long-term and high-resolution backscatter coefficient data are still lacking in many urban studies (e.g., building height estimation). Here, we proposed a framework to reconstruct the 1-km backscatter coefficient in 1990–2022 utilizing the Sentinel-1 Ground Range Detected data and Landsat time series data in the Jing–Jin–Ji (JJJ) region. First, we developed a regression model to convert the optical signals from Landsat into backscatter coefficients as the Sentinel-1 data, using observations from 2015 to 2022. Then, we reconstructed backscatter coefficients from 1990 to 2022 using the long-term Landsat data. Using the reconstructed backscatter coefficients, we analyzed the dynamic patterns of building height over the past decades. The proposed approach performs well on estimating the backscatter coefficient and its spatial pattern, with the annual mean absolute error, root mean square error, and R 2 of 1.10 dB, 1.50 dB, and 0.64, respectively. The temporal trends revealed from the reconstructed backscatter data are reliable compared with satellite observations at a relatively coarse resolution, with Pearson’s coefficients above 0.92 in 6 sample cities. The derived building height from the reconstructed SAR data indicates that the JJJ region experienced a noticeable upward expansion in 1990–2022, e.g., Beijing has the fastest growth rate of 0.420 km 3 /decade regarding the total building volumes. The proposed framework of reconstructing SAR data from optical satellite images provides a new insight to complement the long-term and high-resolution backscatter from local to global scales.

Better localized predictions with Out-of-Scope information and Explainable AI: One-Shot SAR backscatter nowcast framework with data from neighboring region

Synthetic Aperture Radar (SAR) provides 10-m weather-independent global Earth surface observations for various tasks such as land cover land use mapping, water body delineation, and vegetation change monitoring. However, the application of SAR imagery has been limited to retrospective tasks by a “first event then observation” rule. Recent studies have proven the feasibility of a one-shot nowcast of backscatters of SAR imagery using meteorological driving forces, soil moisture, geomorphic factors, and previous SAR images collected for the target area. Although the approach is promising, spatial connectivity, more specifically, the influence of the status of surrounding areas of the target location has yet to be considered. To fill that gap, this study proposed two nowcasting frameworks that can integrate precipitation and soil moisture data collected from surrounding areas through spatial aggregation (SA) and by processing spatial series (SS), respectively. The catastrophic 2019 Central US Flooding was used as a case study with the goal of predicting backscatters of SAR imagery captured during the event. The results from SA, SS, and a framework that only considers localized input (S0) are compared against each other as well as with the benchmark performance created with persistence assumption. Results show that S0, SA, and SS outperform the benchmark. More importantly, considering data from upstream neighboring areas further improves prediction accuracy compared to S0 where only inputs from the target region are considered. The gradients of results considering/not considering neighboring data indicates that neighboring data can alter the model’s attention on each feature of the localized input matrix. The difference in gradients between SA and SS indicates the way the neighboring information is integrated also matters. The methodology proposed by this study can serve as a building block for more active usage of SAR imagery in forward-looking tasks such as early flood warning and response.

Forest Aboveground Biomass Estimation in Subtropical Mountain Areas Based on Improved Water Cloud Model and PolSAR Decomposition Using L-Band PolSAR Data

Forest aboveground biomass (AGB) retrieval using synthetic aperture radar (SAR) backscatter has received extensive attention. The water cloud model (WCM), because of its simplicity and physical significance, has been one of the most commonly used models for estimating forest AGB using SAR backscatter. Nevertheless, forest AGB estimation using the WCM is usually based on simplified assumptions and empirical fitting, leading to results that tend to overestimate or underestimate. Moreover, the physical connection between the model and the polarimetric synthetic aperture radar (PolSAR) is not established, which leads to the limitation of the inversion scale. In this paper, based on the fully polarimetric SAR data from the Advanced Land Observing Satellite-2 (ALOS-2) Phased Array-type L-band Synthetic Aperture Radar (PALSAR-2), the relative contributions of the three major scattering mechanisms were first analyzed in a hilly area of southern China. On this basis, the traditional WCM was extended by considering the secondary scattering mechanism. Then, to establish the direct relationship between the vegetation scattering mechanism and forest AGB, a new relationship equation between the PolSAR decomposition model and the improved water cloud model (I-WCM) was constructed without the help of external data. Finally, a nonlinear iterative method was used to estimate the forest AGB. The results show that volume scattering is the dominant mechanism, accounting for more than 60%. Double-bounce scattering accounts for the smallest fraction, but still about 10%, which means that the contribution of the double-bounce scattering component is not negligible in forested areas because of the strong penetration capability of the long-wave SAR. The modified method provides a correlation coefficient R2 of 0.665 and a root mean square error (RMSE) of 21.902, which is an improvement of 36.42% compared to the traditional fitting method. Moreover, it enables the extraction of forest parameters at the pix scale using PolSAR data without the need for low-resolution external data and is thus helpful for high-resolution mapping of forest AGB.