In order to address the risk of explosion due to CH4 from exhaust gas produced during biogas upgrading in closed carbon fixation systems employing photosynthetic microalgae, an off-site bicarbonation absorber system was developed to promote microalgal CO2 fixation under atmospheric pressure. The abundant CO2 in the biogas upgrading exhaust gas (≥90 vol.% CO2, ≤10 vol.% CH4) reacted with a Na2CO3 solution in the off-site bicarbonation absorber to produce NaHCO3, which was used as carbon source for microalgal growth in enclosed column photobioreactors. After the reaction, CH4 was discharged outside the bicarbonation absorber because it did not react with the Na2CO3 solution and was extremely difficult to dissolve in water, thereby avoiding the explosion risk due to accumulated CH4 in the enclosed column photobioreactors. The experimental results showed that the Spirulina growth rate first increased 1.7 times, peaking at 0.6g/L/d, and then decreased when the bicarbonation reaction time (optimal 50min), absorber diameter (optimal 10cm), initial Na2CO3 concentration (optimal 173mM), and exhaust gas aeration rate (optimal 100 sccm) increased. The optimal molar ratio of NaHCO3 to total inorganic carbon in the bicarbonation absorber solution reached 79%. The sufficient HCO3- supply and suitable pH of the microalgal solution improved the synthesis of photosynthetic pigments in the microalgal cells and enhanced their photochemical efficiency and carbon sequestration rates.
Read full abstract