Synthesis Of Polycyclic Aromatic Hydrocarbons Research Articles

Data-Driven Insights into the Contamination of Polycyclic Aromatic Hydrocarbons in Marine Bays.

The synthesis of polycyclic aromatic hydrocarbon (PAH) data allows us to quantify and gain insights into the spatiotemporal dynamics of PAH contamination in marine bays. Here, a data synthesis framework was developed to understand data-driven insights into the spatiotemporal levels, compositional profiles, and potential sources of PAHs in water and sediment of marine bays. PAHs were detected in 69 bays worldwide, with contamination hotspots located in Asian bays. PAH concentrations in pre-2000 were significantly lower than those in the 2000s and post-2010, while the dominant species in water and sediment were 2-3 ring and 4-6 ring PAHs, respectively. The composition patterns of PAHs included 2-3 ring, 3-5 ring, and 4-5 ring dominant categories, but no significant distance decay relationship was found in the composition similarity due to international energy trade. Temporal dynamic patterns of concentrations included Descending-, Ascending-, and Inverted V-type, whereas over longer time spans, the pattern is more similar to the Inverted V-type owing to the reductions in emission intensity. PAHs were derived from both petrogenic and pyrolytic sources, with combustion from both coal and petroleum being the dominant source. These data-driven discoveries provide quantitative insights into the spatiotemporal patterns in the concentration and composition of PAHs, contributing to the mitigation of PAH contamination.

Ligand‐Free Pd‐Catalyzed Synthesis of PAHs via Vinyl C−H Activation/Decarboxylative Cyclization Sequence

AbstractHerein, we describe a strategy for the synthesis of polycyclic aromatic hydrocarbons (PAHs) from readily available 2‐iodostyrenes and o‐halobenzoic acids through a ligand‐free palladium‐catalyzed cascade vinyl C−H activation/decarboxylative cyclization. A vinyl‐coordinated five‐membered palladacycle was proposed as the key intermediate for this sequential process. Furthermore, Heptagon‐embedded aromatic compounds can be smoothly synthesized by employing 8‐bromo‐1‐naphthoic acid as decarboxylative insertion unit.

Phenylsulfonate as a photolabile group for intramolecular carbon-carbon cross-coupling reactions.

Efficient cyclization reactions play a pivotal role in the synthesis of extended polycyclic aromatic hydrocarbons (PAHs) and graphene nanoribbons. Although efficient reactions have been developed, a simple yet versatile method that is compatible with most functional groups is still lacking. Herein, we report the use of phenylsulfonates as a photolabile group to generate aryl radicals that undergo a radical cyclization reaction to produce triphenylene derivatives. The phenylsulfonate group proves to be a highly adaptable and robust photolabile group, and compatible with Suzuki cross-coupling conditions. Kinetic and optimization experiments have been conducted, shedding light on the potential of this reaction as a versatile tool for the synthesis of PAHs.

Synthesis of Polycyclic Aromatic Hydrocarbons with Highly Twisted N-Doped Heptalene

A series of N-doped heptalene-containing polycyclic aromatic hydrocarbons (PAHs) have been synthesized and characterized in comparison with the N-doped azulene analogs. The crystal structure revealed its highly twisted geometry with a dihedral angle of 105.7° in the cove region of the N-doped dibenzoheptalene backbone. In addition, the electronic structure was both theoretically and experimentally investigated compared with the PAH bearing N-doped azulene unit. Our study provides a new synthetic strategy towards N-doped heptalene-embedded PAHs, and gives insights into the electronic properties of novel π-systems with N-doped nonalternant topologies.

Electrochemical Syntheses of Polycyclic Aromatic Hydrocarbons (PAHs).

Polycyclic aromatic hydrocarbons (PAHs) have surfaced as increasingly viable components in optoelectronics and material sciences. The development of highly efficient and atom-economic tools to prepare PAHs under exceedingly mild conditions constitutes a long-term goal. Traditional syntheses of PAHs have largely relied on multistep approaches or the conventional Scholl reaction. However, Scholl reactions are largely inefficient with electron-deficient substrates, require stoichiometric chemical oxidants, and typically occur in the presence of strong acid. In sharp contrast, electrochemistry has gained considerable momentum during the past decade as an alternative for the facile and straightforward PAHs assembly, generally via electro-oxidative dehydrogenative annulation, releasing molecular hydrogen as the sole stoichiometric byproduct by the hydrogen evolution reaction (HER). This review provides an overview on the recent and significant advances in the field of electrochemical syntheses of various PAHs until January 2023. This article is protected by copyright. All rights reserved.

Experimental study on potassium catalyzed gasification of large particle size biomass with CO2

Candlenut wood with large particle size is selected to investigate the biomass gasification catalyzed by potassium. The sample pore structure, the spatial distribution of potassium, and the effects of potassium salt species on the biomass gasification with CO2 are examined. The results show that the large particle candlenut wood exhibits obvious spatial anisotropy and that the pore structure is mainly distributed along the axial direction. Large particle candlenut wood has a more uniform distribution of potassium salts along the axial direction. Part of the potassium salt releases outward during the gasification, which reduces the potassium salt content in the sample center. The average potassium contents of sample loaded with KCl and biochar of sample loaded with KCl are 9.273% and 7.745%, respectively. The synthesis of polycyclic aromatic hydrocarbons in tar could be inhibited by potassium, which could also catalyze the gasification and methane removal reactions of biochar and facilitate the formation of CO and H2. Compared to raw sample (28.99%), the syngas yields from the gasification of sample loaded with KCl, sample loaded with K2CO3, and sample loaded with K2SO4 are 40.22%, 52.16%, and 41.72%, separately. The catalysis of potassium is closely related to its occupation of the active sites on biochar. The chemical bonds formed by potassium and biochar are repeatedly broken and formed during the gasification, which promotes the decomposition of organic matter. Compared with KCl and K2SO4, K2CO3 has a better catalytic effect.

Pd(II)‐Catalyzed Benzimidazole‐Assisted Annulation of 3‐(1H‐Benzo[d]imidazol‐2‐yl)‐2H‐chromen‐2‐one: Access to Imidazo[1,2‐a]chromeno[3,4‐c]pyridine

AbstractPalladium‐catalyzed [4+2] oxidative annulation of coumarin‐benzimidazoles with olefins for the synthesis of polycyclic aromatic hydrocarbons have been achieved. This synthetic protocol gives access to a wide range of structurally distinct imidazo[1,2‐a]chromeno[3,4‐c]pyridines in moderate to good yield with wide functional group tolerance. Further, photophysical properties of annulated scaffolds have been examined, which discloses their interesting solvatochromic emission behaviors.

Bottom‐Up Synthesis, Dispersion and Properties of Rectangular‐Shaped Graphene Quantum Dots

AbstractCarbon nanomaterials have attracted the attention of the scientific community for more than 30 years now; first with fullerene, then with nanotubes and now with graphene and graphene related materials. Graphene quantum dots (GQDs) are nanoparticles of graphene that can be synthesized following two approaches, namely top‐down and bottom‐up methods. The top‐down synthesis used harsh chemical and/or physical treatments of macroscopic graphitic materials to obtain nanoparticles, while the second is based on organic chemistry through the synthesis of polycyclic aromatic hydrocarbons exhibiting various sizes and shapes that are perfectly controlled. The main drawback of this approach is related to the low solubility of carbon materials that prevents the synthesis of nanoparticles containing more than few hundreds of sp2 carbon atoms. Here we report on the synthesis of a family of rectangular‐shaped graphene quantum dots containing up to 162 sp2 carbon atoms. These graphene quantum dots are not functionalized on their periphery in order to keep the maximum similarity with nanoparticles of pure graphene. We chose water with sodium deoxycholate surfactant to study their dispersion and their optical properties (absorption, photoluminescence and photoluminescence excitation). The electronic structure of the particles and of their aggregates are studied using Tight‐Binding (TB). We observe that the larger particles (GQD 3 and GQD 4) present a slightly better dispensability than the smaller ones, probably because the larger GQDs can accommodate more surfactant molecules on each side, which helps to stabilize their dispersion in water.

Paving the way to the synthesis of PAHs in dark molecular clouds: The formation of cyclopentadienyl radical (c-C5H5)

Context. The interest of astrophysicists and astrochemists in studying polycyclic aromatic hydrocarbons (PAHs) has grown since their assignment to previously unidentified IR emission bands of dust grains. Although observations show that PAHs are present in the interstellar medium (ISM), there is still no consensus about their formation. PAH formation has been studied following two approaches: bottom-up (i.e. through the association of smaller hydrocarbons) and top-down (via the photo-dissociation or hydrogenation of larger-structures). The recent detection of simple aromatic rings in the TMC-1 molecular cloud seems to suggest the bottom-up scenario is favoured. Aims. We study the reaction between the propargyl (C3H3) radical and the vinyl radical (C2H3) under interstellar conditions, providing new kinetic parameters for the formation of PAH precursors. Methods. We used high-level quantum-chemical calculations to describe the reaction mechanism between these two radicals. We calculated the rate constant of the individual product channels in the temperature range 10–400 K and at 1 × 10−7 atm by solving the one-dimensional master equation to quantitatively understand whether this reaction is viable in the ISM. Results. Our results show that this reaction is likely to occur even in the low-density (~104 cm−3) and low-temperature (~10 K) conditions of molecular dark clouds. The main product is the cyclopentadienyl radical (C5H5). The unsaturated open-chain hydrocarbon C5H5 in the trans (trans-C5H5) and cis conformations (cis-C5H5) are also formed, but to a lesser extent. Conclusions. Our results show that the reaction of vinyl radical with propargyl radical is efficient under interstellar conditions and yields the cyclopentadienyl radical, which could be an important precursor for the formation of more complex polycyclic hydrocarbons (e.g. indene) and simple PAHs (e.g. naphthalene) in molecular dark clouds.

Kinetic model and kerosene surrogate for calculating gas turbine engine emission of carcinogenic hydrocarbons

To calculate the emission of carcinogenic polycyclic aromatic hydrocarbons by the combustion chambers of aircraft gas turbine engines, the A17 kinetic model has been developed, characterized by new blocks of elementary chemical reactions of hydrocarbon compounds oxidation and synthesis of polycyclic aromatic hydrocarbons. The results of model validation showed satisfactory agreement with the experimental data and the possibility of applying the model to describe combustion processes in gas turbine engine combustion chambers. A review and numerical study was carried out for 14 surrogates (model fuels) of aviation kerosene, the combustion of which can be described using the A17 model. Simulation of stabilized flame of a previously prepared mixture showed the effectiveness of Drexel, Liu, su4, UM1 surrogates, the predictions for which agree satisfactorily with the experimental data and provide the expected levels of concentration of polycyclic aromatic hydrocarbons. The calculations show the dependence of the concentration of the most carcinogenic polycyclic aromatic hydrocarbon benzo(a)pyrene, and the ratio of the main combustion products CO2/H2O on the molar mass of the fuel. For the experimentally determined value of the molar mass of kerosene TS-1, the smallest deviation (up to 0.25%) is demonstrated by the su4 and UM1 surrogates. Due to the best predictive capability for the ignition delay time, normal flame propagation speed, pyrolysis and combustion products, the su4 and UM1 surrogates can be chosen to calculate the emission of carcinogenic polycyclic aromatic hydrocarbons from aircraft gas turbine engine combustion chambers.

Exploring the Acid-Catalyzed Reactions of 10,11-Epoxy-Dibenzo[a,d]cycloheptan-5-ol as the Synthetic Modules toward Polycyclic Aromatic Scaffolds.

The structural diversity of polycyclic aromatic hydrocarbons (PAHs) offers exciting opportunities for their applications. Yet, selective synthesis of such conjugated networks poses a formidable challenge. Compared to the prominence of transition-metal-catalyzed cross-coupling and oxidative Scholl reactions, cationic rearrangement in the synthesis of polycyclic aromatic hydrocarbon is an underexplored subject. In this study, we reveal that cationic intermediate generated from epoxy dibenzocycloheptanol can be transformed into acenes, azulene-embedded PAHs, and dibenzocycloheptanone derivatives. Reactive patterns, including Meinwald rearrangement, Nazarov cyclization, transannular aryl migration, and transannular Friedel–Crafts cyclization were identified. Both substrate structures and reaction temperature affect the reaction pathways in predictable and manageable manners. A mechanistic scheme was postulated as the working model to guide the reactivity for further application. Substrates containing heterocyclic and ferrocenyl groups exhibit similar reactivity profiles. The inquiry culminates in the selective synthesis of 5, 7, 12, 14-tetrasubstituted C2h and C2v pentacene derivatives. Our results demonstrate that polycyclic aromatic hydrocarbons can be selectively prepared with this cation-initiated strategy by methodically tuning the reactivity.

Extended Conjugation Attenuates the Quenching of Aggregation-Induced Emitters by Photocyclization Pathways.

Herein, we expose how the antagonistic relationship between solid‐state luminescence and photocyclization of oligoaryl alkene chromophores is modulated by the conjugation length of their alkenyl backbones. Heptaaryl cycloheptatriene molecular rotors exhibit aggregation‐induced emission characteristics. We show that their emission is turned off upon breaking the conjugation of the cycloheptatriene by epoxide formation. While this modification is deleterious to photoluminescence, it enables formation of extended polycyclic frameworks by Mallory reactions. We exploit this dichotomy (i) to manipulate emission properties in a controlled manner and (ii) as a synthetic tool to link together pairs of phenyl rings in a specific sequence. This method to alter the tendency of oligoaryl alkenes to undergo photocyclization can inform the design of solid‐state emitters that avoid this quenching mechanism, while also allowing selective cyclization in syntheses of polycyclic aromatic hydrocarbons.

Extended Conjugation Attenuates the Quenching of Aggregation‐Induced Emitters by Photocyclization Pathways

AbstractHerein, we expose how the antagonistic relationship between solid‐state luminescence and photocyclization of oligoaryl alkene chromophores is modulated by the conjugation length of their alkenyl backbones. Heptaaryl cycloheptatriene molecular rotors exhibit aggregation‐induced emission characteristics. We show that their emission is turned off upon breaking the conjugation of the cycloheptatriene by epoxide formation. While this modification is deleterious to photoluminescence, it enables formation of extended polycyclic frameworks by Mallory reactions. We exploit this dichotomy (i) to manipulate emission properties in a controlled manner and (ii) as a synthetic tool to link together pairs of phenyl rings in a specific sequence. This method to alter the tendency of oligoaryl alkenes to undergo photocyclization can inform the design of solid‐state emitters that avoid this quenching mechanism, while also allowing selective cyclization in syntheses of polycyclic aromatic hydrocarbons.

Insight into the fast pyrolysis of lignin: Unraveling the role of volatile evolving and char structural evolution

Unraveling the role of volatile evolving and char structural evolution, as well as the pyrolysis reaction pathway, is crucial for lignin effective valorization by a pyrolysis-based biorefinery approach. The fast pyrolysis of lignin at 200–800 °C was conducted to explore volatile release characteristics and their link with char structure evolution. The release of simple substituted aryl compounds below 350 °C was aided by the cleavage of β-O-4 and α-O-4. The C-O, C–C, and carboxyl groups of the depolymerized free radical fragments were cleaved further, providing stable mono-phenol (350 °C → 500 °C). Secondary reactions and pyrolytic macromolecular compounds resulted in the synthesis of polycyclic aromatic hydrocarbons (>700 °C). A cubic polynomial was developed to correlate the aromaticity with the atom ratio of H/C. The ring condensation degree and H/C demonstrated an excellent positive linear correlation. Additionally, the aromatization started at 350 °C, and small aromatic rings were changed into more ordered rings (≥6 rings). The fused-ring structures of char had progressed in the following order: 1 × 2, 2 × 3, 4 × 4, and 4 × 5, corresponding to 350 °C, 500 °C, 600 °C, and 800 °C, respectively. High temperatures contributed to the formation of aromatic monomers. Lignin pyrolysis pathway was established based on the correlation between volatile release characteristics and char structural evolution.

Inverting Conventional Chemoselectivity in the Sonogashira Coupling Reaction of Polyhalogenated Aryl Triflates with TMS-Arylalkynes.

A newly developed phosphine ligand with a C2-cyclohexyl group on the indole ring was successfully applied in a chemoselective Sonogashira coupling reaction with excellent chemoselectivity, affording an inversion of the conventional chemoselectivity order of C-Br > C-Cl > C-OTf. This study also provided an efficient approach to the synthesis of polycyclic aromatic hydrocarbons (PAHs) and the natural product analogue trimethyl-selaginellin L by merging of chemoselective Sonogashira and Suzuki-Miyaura coupling reactions.

Bending versus Twisting Acenes - A Computational Study.

Polycyclic aromatic hydrocarbons (PAHs) are widely used in organic electronic devices. The electronic, magnetic, and optical properties of PAHs can be tuned by structural modifications to the aromatic backbone to introduce an inherent distortion from planarity, such as bending or twisting. However, it remains difficult to isolate and control the effects of such distortions. Here, we sought to understand how backbone twisting and bending affect the electronic properties of acenes, as models for larger PAHs. We found that, even when highly distorted from planarity (30° per ring), acenes maintain their aromatic character and π orbital delocalization with minor mixing of the σ and π orbitals. In addition, the energy gap between the HOMO and LUMO decreases with increasing twist, while the gap is hardly affected by bending, since the energy of both orbitals increase to a similar extent. For bent acenes in the triplet state, the spin becomes more localized with increasing bend, whereas twisting produces an evenly distributed spin delocalization. These findings can guide the synthesis of PAHs with tailored properties.

Synthesis of Polycyclic Aromatic Hydrocarbons Decorated by Fluorinated Carbon Acids/Carbanions.

The carboarylation reaction of biphenyl-alkynes was successfully triggered by electrophilic attack of 1,1-bis(triflyl)ethylene on the alkyne moiety to give polycyclic aromatic hydrocarbons (PAHs) decorated by superacidic carbon acid functionality. Neutralisation of thus obtained acids with NaHCO3 yielded the corresponding sodium salts, which showed improved solubility in both aqueous and organic solvents.

On-Surface Strain-Driven Synthesis of Nonalternant Non-Benzenoid Aromatic Compounds Containing Four- to Eight-Membered Rings.

The synthesis of polycyclic aromatic hydrocarbons containing various non-benzenoid rings remains a big challenge facing contemporary organic chemistry despite a considerable effort made over the last decades. Herein, we present a novel route, employing on-surface chemistry, to synthesize nonalternant polycyclic aromatic hydrocarbons containing up to four distinct kinds of non-benzenoid rings. We show that the surface-induced mechanical constraints imposed on strained helical reactants play a decisive role leading to the formation of products, energetically unfavorable in solution, with a peculiar ring current stabilizing the aromatic character of the π-conjugated system. Determination of the chemical and electronic structures of the most frequent product reveals its closed-shell character and low band gap. The present study renders a new route for the synthesis of novel nonalternant polycyclic aromatic hydrocarbons or other hydrocarbons driven by internal stress imposed by the surface not available by traditional approaches of organic chemistry in solution.

Heterocyclic Ring-Opening of Nanographene on Au(111).

Cyclo-dehydrogenation is of importance to induce the planarization of molecules on noble surfaces upon annealing. In contrast to a number of successful syntheses of polycyclic aromatic hydrocarbons by forming carbon-carbon bonds, it is still rare to conduct conjugation and cleavage of carbon-nitrogen bonds in molecules. Here, we present a systematic transformation of the C-N bonds in11,11,12,12-tetraphenyl-1,4,5,8-tetraazaanthraquinodimethane as well as three other derivatives on Au(111). With bond-resolved scanning tunneling microscopy, we discovered novel the "heterocyclic segregation" reaction of one pyrazine ring with two nitrogen atoms to form two quinoline rings with one nitrogen each. Density functional theory calculations showed that the intramolecular ring-forming and -opening of N-heterocycles are strongly affected by the initial hydrogen-substrate interaction.

Heterocyclic Ring‐Opening of Nanographene on Au(111)

AbstractCyclo‐dehydrogenation is of importance to induce the planarization of molecules on noble surfaces upon annealing. In contrast to a number of successful syntheses of polycyclic aromatic hydrocarbons by forming carbon–carbon bonds, it is still rare to conduct conjugation and cleavage of carbon–nitrogen bonds in molecules. Here, we present a systematic transformation of the C−N bonds in11,11,12,12‐tetraphenyl‐1,4,5,8‐tetraazaanthraquinodimethane as well as three other derivatives on Au(111). With bond‐resolved scanning tunneling microscopy, we discovered novel the “heterocyclic segregation” reaction of one pyrazine ring with two nitrogen atoms to form two quinoline rings with one nitrogen each. Density functional theory calculations showed that the intramolecular ring‐forming and ‐opening of N‐heterocycles are strongly affected by the initial hydrogen–substrate interaction.