Switched Reluctance Motor Research Articles

Influence of DC/DC Converter Control on Source Current Ripple of the Switched Reluctance Motor

This paper presents a solution to reduce source current ripple in the electrical power supplying a switched reluctance motor (SRM) drive. Source current ripple negatively affects the power source by introducing a variable frequency component and increasing losses in the power source. Reducing the source current ripple is important, especially in battery electric vehicles (BEVs). The solution proposed in this paper for reducing source current ripple is to use a classic DC/DC boost converter connected in series with the SRM power supply system. The key to reducing source current ripple is the DC/DC converter control method proposed and described in this article. This method involves controlling the DC/DC converter synchronized with the speed of the SRM motor DC/DC. To verify the correct operation of the proposed solution, simulation and laboratory tests of an SRM drive were performed, the results of which are shown in this paper.

A Novel Enhanced Fire Hawks Optimization Approach for Improving the Efficiency of Converter‐Based Controllers in Switched Reluctance Motors

ABSTRACTSwitched reluctance motors (SRMs) have gained popularity in various industrial applications due to their advantages, including structural simplicity, high reliability, low cost, and operational stability over a wide speed range without relying on rare‐earth permanent magnet materials. However, these motors exhibit drawbacks such as weak torque density, low efficiency, and significant torque ripple, particularly in high‐speed operation. An efficient converter‐based control approach is proposed to manage speed and torque variations in SRM motors, addressing these issues. A multilevel converter (MC) is introduced as a fundamental component. The novel multilevel converter (NMC) accommodates SRMs with varying numbers of phases and exhibits quick demagnetization and excitation behaviors, enabling independent operation of each phase even during conduction overlaps. Subsequently, an effective controller is developed for the SRM motor, combining proportional integral derivative (PID) control with enhanced fire hawks optimization (EFHO). The EFHO optimizes the PID gain values to enhance controller performance. The converter operation minimizes torque ripple and facilitates speed management. The EFHO technique is a fusion of fire hawks optimization (FHO) and the sine cosine algorithm (SCA). This amalgamation improves the updating process of FHO by incorporating SCA. The proposed methodology is implemented in MATLAB and evaluated through various metrics, including SRM motor current, voltage, speed, and torque, under electric vehicle (EV) load conditions. Performance comparisons are conducted with traditional optimization algorithms such as the whale optimization algorithm (WOA) and ant colony optimization (ACO). The results validate the effectiveness of the proposed methodology in achieving improved SRM motor control and performance.

Electronic system and signal processing in torque-meter interface of switched reluctance motor drive laboratory test bench

Electronic system and signal processing in torque-meter interface of switched reluctance motor drive laboratory test bench

Adaptive Weighted Particle Swarm Optimization for Controlling Multiple Switched Reluctance Motors with Enhanced Deviatoric Coupling Control

Switched reluctance motors (SRMs) are widely used in industrial applications due to their advantages. Multi-motor synchronous control systems are crucial in modern industry, as their control strategies significantly impact synchronization performance. Traditional deviation coupling control structures face limitations during the startup phase, leading to excessive tracking errors and exacerbated by uneven load distribution, resulting in desynchronized motor acceleration and increased speed synchronization errors. This study proposes a modified deviation coupling control method based on an adaptive weighted particle swarm optimization (PSO) algorithm to enhance multi-motor synchronization performance. Traditional deviation coupling control applies equal reference torque inputs to each motor’s current loop, failing to address uneven load distribution and causing inconsistent accelerations. To resolve this, a gain equation based on speed deviation is introduced, incorporating self-tracking error and gain coefficients for dynamic synchronization error compensation. The gain coefficients are optimized using the adaptive weighted PSO algorithm to improve system adaptability. A simulation model of a synchronization control system for three SRMs was developed in the Matlab/Simulink R2023b environment. This model compares the synchronization performance of traditional deviation coupling, Fuzzy-PID improved structure, and adaptive PSO improved structure during motor startup, sudden speed increases, and load disturbances. The validated deviation coupling control structure achieved the initial set speed in approximately 0.236 s, demonstrating faster convergence and a 6.35% reduction in settling time. In both the motor startup and sudden speed increase phases, the two optimized methods outperformed the traditional structure in dynamic performance and synchronization accuracy, with the adaptive PSO structure improving synchronization accuracy by 54% and 37.17% over the Fuzzy-PID structure, respectively. Therefore, the PSO-optimized control system demonstrates faster convergence, improved stability, and enhanced synchronization performance.

TORQUE RIPPLE RATE REDUCTION OF 6/4 SWITCHED RELUCTANCE MOTOR USING SLIDING MODE LEARNING CONTROLS

This paper presents a sliding mode control for reducing the torque ripple of a 6/4 switched reluctance motor. Several types of sliding mode control based on the current variable are implemented: conventional sliding mode control, learning sliding mode control, and learning sliding mode control with PID. The research also includes the design of the controller and simulation results that demonstrate the effectiveness of the proposed method in reducing torque ripple. The learning sliding mode control with PID has a significant implication for reduction torque ripple rate improvement of about 70% compared to the conventional model. As well as controlling the speed response and settling time. This makes the control of switched reluctance motors a current and speed controller.

Fault–Tolerant Operation of Switched Reluctance Motor Using Cascaded Current and PWM Control With Effect of Commutation Angle Variation

Fault–Tolerant Operation of Switched Reluctance Motor Using Cascaded Current and PWM Control With Effect of Commutation Angle Variation

Design and Performance Analysis of A Linear Switched Reluctance Motor Considering End Effects

Introduction: In recent years, linear actuators have gained significant attention due to their ability to provide direct linear movement without the need for motion transformation devices. One significant challenge in the design and modeling of linear actuators is the occurrence of longitudinal end-effects. The finite length of the translator stack in linear actuators causes an unbalanced phase force, leading to discrepancies between the phases at the end and center of the actuator. Neglecting these end-effects can lead to inaccuracies in the actuator's performance and control. Methods: The objective of this study is to develop a comprehensive approach for the design, sizing, and modeling of the actuator to ensure optimal performance. An energy conversion procedure calculates the thrust force and determines the actuator's geometrical parameters. A numerical model based on the finite element method is developed to analyze the actuator's magnetic behavior and establish its characteristics. Furthermore, a thorough analysis of the end effect is conducted using two-dimensional finite element analysis. Results: To accurately capture the actuator's dynamic response and enable precise control, a mathematical model is formulated, incorporating the nonlinear behavior of inductance and incorporating the end effect factor. The proposed model demonstrates high accuracy and provides a solid foundation for the control of the linear switched reluctance actuator. Conclusion: Overall, this study contributes to the advancement of direct drive systems for industrial applications by providing a detailed design procedure and an accurate modeling approach for the linear actuator, enabling more efficient and precise control strategies.

Multi-objective optimization of switched reluctance motor driving electric vehicles based on vehicle operating condition

To improve the comprehensive performance of the switched reluctance motor (SRM) for electric vehicles (EVs) under actual driving conditions, a novel geometrical optimization method based on the time-varying phase current characteristics and the comprehensive indicator with justified weight coefficients is proposed in this paper. First, based on the established dynamic models of EV and SRM, the actual operating phase currents of the motor working under the New European Driving Cycle (NEDC) are extracted and classified to develop the representative optimization conditions. Then, considering the requirements of EV, five indicators are defined to evaluate the comprehensive performance of SRM, and a new multi-objective synchronization optimization function is proposed with five weight coefficients obtained by the statistical analysis method for the sample data of the indicators. Furthermore, the geometrical optimization for a four-phase 8/6 SRM is carried out by the combination of Particle Swarm Optimization (PSO) and BP neural network algorithms, after analyzing the effects of key geometrical parameters on the indicators. Finally, the work performance of the optimized SRM is evaluated and compared with that of the initial prototype, and the results show that the optimized SRM with the proposed multi-objective synchronization optimization method can improve the comprehensive indicator by 59.59%, and can significantly enhance the vehicle actual working economy by 50.74% under NEDC cycle.

Artificial Neural Network-based Control of a Switched Reluctance Motor for a High-precision Positioning System

This paper presents a approach to control a switched reluctance motor (SRM) in the context of a high-precision positioning system using artificial neural networks (ANNs). The SRM is known for its robustness and simplicity, making it suitable for various applications, including positioning systems where precision is paramount. Traditional control methods often struggle to achieve the desired level of accuracy due to the non-linear and dynamic nature of the SRM. In this study, we propose an advanced control strategy leveraging the adaptive learning capabilities of ANNs. The neural network is trained to capture the intricate relationships between the motor's inputs and outputs, allowing for precise control in real-time. By measuring the electromagnetic torque and phase currents, the neural network is able to estimate the rotor position, facilitating the elimination of the rotor position sensor. The training data set of the neural network consists of magnetization data for the SRM with the electromagnetic torque and current as inputs and the corresponding position as outputs in this set. With a sufficiently large training data set, the artificial neural networks (ANN) can be correlated for appropriate network architecture.

Enhancing SRM Performance through Multi-Platform Optimization and FPGA-Based Real-Time Simulation

This paper proposes a multi-platform algorithm methodology in order to define firing angles of torque sharing functions (TSFs) for the indirect torque control of switched reluctance motors (SRM) through a hardware-in-the-loop (HIL) system. This proposal is used to achieve optimal levels of torque ripple and losses with accuracy and reliability, while taking advantage of real-time simulation. The analysis is performed assuming steady-state conditions of speed and torque reference for levels below the base speed, aiming to obtain firing angles ensuring optimal tracking performance. A novel methodology is proposed by using a grid search algorithm that handles the communication between Python, Code Composer, and the Typhoon HIL device. For that, an experimental data FPGA-based model with 500~ns of simulation time step is used to ensure highly accurate dynamic responses of current and electromagnetic torque. Moreover, controller-HIL (C-HIL) is used to have a safe and high fidelity testing environment, allowing rapid testing before transitioning to an experimental test bench. The simulation results are experimentally validated, demonstrating that the proposed strategy is effective and ensures optimal performance, taking into account peripheral systems of A/D, signal conditioning, PWM, and sensor emulation.

Fault-Tolerant Performance Analysis of a Modified Neutral-Point-Clamped Asymmetric Half-Bridge Converter for an In-Wheel Switched Reluctance Motor

Reliability is an essential factor for the operation of the Switched Reluctance Motor (SRM) drive. Electric vehicles operate in harsh environments, which may degrade the operation of power converters. These failure modes include transistor open- and short-circuits, freewheeling diode open- and short-circuits, and DC-link capacitor failures. This work presents a performance analysis of an in-wheel SRM for an electric vehicle under short-circuit (SC) and open-circuit (OC) faults of a modified Neutral-Point-Clamped Asymmetric Half-Bridge (NPC-AHB) Converter. The SRM is modeled as an in-wheel electric vehicle. A separate vehicle model attached to the motor is also developed for validation and performance of the NPC-AHB under different faulty scenarios. The performance of the modified NPC-AHB is also compared with that of a conventional AHB under faulty conditions for an in-wheel 8/6 SRM. The performance indicators such as torque, speed, current, and flux are presented from MATLAB/Simulink 2023b numerical simulations.

Robust deadbeat predictive current control for unipolar sinusoidal excited SRM with multi-parameter mismatch compensation

In the control of unipolar sinusoidal excited switched reluctance motors (SRMs), deadbeat predictive current controllers (DPCCs) have gained attention for their enhanced dynamic performance. However, periodic disturbances caused by mismatches between the predictive model’s nominal and actual system parameters degrade the control performance of SRMs. To address this issue, a robust DPCC with multi-parameter compensation is proposed to improve dq0-axes current control performance. By analyzing the impact of parameter mismatches, a Kalman filter (KF) is developed to compensate for inductance coefficient mismatches, mitigating periodic disturbances. Additionally, a disturbance estimator with measurement noise suppression is integrated into the DPCC for both state and disturbance estimation to handle residual uncertainties, including winding resistance mismatches, magnetic saturation, and unmodeled dynamics. Compared simulation and experimental results validate the effectiveness of the proposed robust DPCC.

New method for determining iron power losses in switched reluctance motors with laminated and composite magnetic cores

Power losses from motors and drives can decrease their efficiency. The development of devices with high efficiency is a necessity nowadays, with a view to reducing CO2 emissions. The application of new magnetic materials is one method for increasing the efficiency of motors, although prediction and calculation of the losses in the magnetic circuits of motors are also very important. To reduce the iron losses, iron powder composites are used here instead of Fe-Si laminated steel sheets, in a low-power switched reluctance motor (SRM), and a new method of determining the iron loss in the magnetic circuit is developed. Through the use of new materials in the motor, we can achieve a 19% decrease in the iron loss in comparison to a commercial motor. A comparison of the measurement results for our new method of iron loss prediction showed that the difference is approximately 20-26%, depending on the type of magnetic circuit used for the motor. The usage of soft magnetic composites rather than electrical steel sheets can decrease the loss in magnetic circuits. The results from our new method of determination of iron loss are in good agreement with results of measurements, meaning that it can be applied in a detailed analysis of SRMs. The application of soft magnetic composites in electromagnetic and electromechanical converters is a new method for lowering iron losses in new devices. The determination of such losses in SRMs is still challenging, and the proposed method broadens the state of the art in this area. The method developed here is based on motor current measurements, FEM calculations, and measurements of the magnetisation curves and iron loss for samples according to IEC standards. The results obtained in this work can be used by designers for the development of new kinds of SRMs.

An improved finite set model predictive control of SRM drive based on a voltage vectors strategy for low torque ripple

The robust rotor structure and fault-tolerance characteristics of the Switched Reluctance Motors (SRMs) are the best choice for next-generation Electric Vehicle (EV) applications. This machine has few restraints like high torque and flux ripples. However, the existing Model Predictive Control (MPC) using multiple control objectives and maximum sectors in the switching table results in high torque ripples due to the improper sector partition, Voltage Vectors (VVs) and weight factor (K1) selection. This paper proposes a Finite Set-Model Predictive Control (FS-MPC) for an analytical model of a non-linearity SRM machine to analyze the torque ripple performance. The proposed VVs are derived using sector partition based on the rotor position. The control is designed as a single cost function with the weighting factor contributing to smooth torque by selecting optimal control signals. Simulation studies and experiments with a four-phase 8/6 SRM drive verifies the enhanced FS-MPC for real-time implementation. The dynamic speed and ripple values of SRM Drives are measured using a mixed signal oscilloscope and the sensor probes. The laboratory outcomes calculate the analytical equations to validate the findings. The calculated value of torque ripple is 9 % through this FS-MPC. The study reveals that the proposed method is well suited for torque ripple reduction than flux ripples.

Improved Reduced Switch Converter Topology for Torque Ripple Reduction in Four-Phase Switched Reluctance Motor Under Dynamic Loading

In this paper, simulation, and performance comparison of a switched reluctance motor (SRM) for a classical asymmetric bridge converter and an improved reduced switch converter topology are provided. In an improved converter, switches are shared by adjacent phases, and one diode is connected in series with each phase winding to avoid reversal of current. Double-phase magnetization is adopted for the analysis of both converter topologies. The performance of both converter topologies are demonstrated using a proportional plus integral (PI) based hysteresis current controller and dynamic load on a 7.5 kW, 8/6 pole, 4- phase SRM. Improved reduced switch converter topology uses half the number of switches as compared to the classical asymmetric bridge converter. According to the simulation results, an improved converter offers superior starting and average torque with less speed settling time. An improved converter reduces the most serious problem of torque ripple in SRM by 50% compared to the classical topology. The reduced switches lower the winding losses and improve the efficiency of the drive system.

Design of Novel Double-Stator Switched Reluctance Motor Drive System for Electric Vehicles

Design of Novel Double-Stator Switched Reluctance Motor Drive System for Electric Vehicles

Switched reluctance motor flux linkage characteristic: experimental approach

Switched reluctance motor flux linkage characteristic: experimental approach

Design and Evaluation of Modular Stator Hybrid-Excitation Switched Reluctance Motor for Torque Performance Improvement

Design and Evaluation of Modular Stator Hybrid-Excitation Switched Reluctance Motor for Torque Performance Improvement

An Online Torque Sharing Function Method Based on Region Division for Reducing Torque Ripple and Copper Losses of Switched Reluctance Motors

An Online Torque Sharing Function Method Based on Region Division for Reducing Torque Ripple and Copper Losses of Switched Reluctance Motors

Model-Free Current Predictive Control Method for Switched Reluctance Motors

Model-Free Current Predictive Control Method for Switched Reluctance Motors