Swelling Test Research Articles

3D-Printed Gelatin-Based Scaffold Crosslinked by Genipin: Evaluation of Mechanical Properties and Biological Effect.

In this study, scaffolds based on natural polymer gelatin A, blended with polyvinylpyrrolidone were crosslinked by genipin (0.5 and 1 wt%), in order to investigate their mechanical performance and potential for biomedical application. Semi-solid extrusion (SSE) 3D printing technique was used, enabling insitu crosslinking of the blend during processing. Swelling test showed that the swelling ratio reduces with higher concentration of genipin due to an increased crosslinking. The FTIR analysis confirmed the crosslinking of scaffolds by genipin. DSC analysis and mechanical testing have shown improved thermal and mechanical properties. Morphological analysis of scaffolds by FESEM showed increased toughening of the material with the crosslinking. Tensile strength and microhardness showed a significant rise in scaffolds with the increase in genipin content, which was up to 93.8% and 125.3%, respectively. These findings were in accordance with morphological features present in samples. The biological effect of the scaffold matrix system was evaluated by qualitative and quantitative cytotoxicity assessment invitro, demonstrating the absence of cytotoxicity in tested preparations in a direct test. The cytotoxicity index based on the metabolic activity of cells in an indirect test showed up to 20% reduction of viability compared with the control, confirming the absence of cytotoxicity, which was additionally verified by propidium iodine staining of the cells exposed to scaffolds. The presented gelatin-based crosslinked scaffolds obtained by 3D printing represent good candidates for biomedical application and future research that includes further invitro and invivo analysis.

Preparation and Performance Evaluation of Small-Molecule Ammonium as a Shale Hydration Inhibitor

In this paper, small-molecule quaternary ammonium salts were synthesized by N-alkylation to inhibit hydration swelling and hydration dispersion. The prepared small-molecule quaternary ammonium salt was characterized by Fourier transform infrared (FTIR) spectroscopy, Thermogravimetric analysis (TGA), particle size analysis and Scanning electron microscopy (SEM), and its performance as an inhibitor in clay was evaluated by an anti-swelling test and a linear swelling test. The results show that small-molecule quaternary ammonium salt (TEE-2) synthesized by triethanolamine and epichlorohydrin in ethanol with a molar ratio of 1:1.5 can successfully inhibit the hydration swelling and dispersion of clay. The anti-swelling rate of TEE-2 was 84.94%, the linear swelling rate was 36.42%, and the linear swelling rate of 0.5% TEE-2 was only 29.34%. The hydration swelling of clay in 0.5% TEE-2 solution was significantly inhibited. The hydration inhibition mechanism of the small-molecule quaternary ammonium salt inhibitor 0.5% TEE-2 was analyzed by FTIR, SEM and TGA. It was considered that 0.5% TEE-2 has strong hydration inhibition, which was realized by infiltration and adsorption on the clay surface. Small-molecule quaternary ammonium salts were beneficial for maintaining wellbore stability and reducing the risk of wellbore instability.

Novel versatile 5-aminoisophthalic acid modified chitosan nanofiber pads for adsorption toward Congo red, methyl orange, crystal violet, and methylene blue

To structure novel nanofiber pads for organic dye removal from dye-polluted water, we previously prepared CSP nanofiber pads by chitosan (CS) and polyethylene oxide (PEO) via electrospinning, followed by preparation of CSRP nanofiber pads through partial PEO removal from CSP, and the subsequent fabrication of CS-A nanofiber pads via grafting 5-aminoisophthalic acid (5-AIPA) to CSRP. FTIR, XRD, and elemental analyses confirmed the successful synthesis of CS-A nanofiber pads (crosslinking and crystalline degrees of 36.64 % and 4.57 %). CS-A nanofiber pads had porous nanofiber structures (diameter and pore size of 153.46 and 3.82 nm), high specific surface area (102.06 m2/g), great thermal stability (total mass loss of 50.2 %), excellent hydrophilicity (water contact angle of 12.0°), superior swelling performance (2331 %), good pH stability (pH of 3.0–11.0), and 6.8 of pHpzc, evidenced by SEM, Brunauer-Emmett-Teller (BET), thermogravimetric (TG), differential thermogravimetric (DTG), wettability, swelling, and solid addition tests. Optimum adsorption parameters (e.g., pH, dosage, and initial concentration) were selected by batches of tests on adsorption toward four organic dyes. CS-A’s surfaces were heterogeneous, and the adsorption belonged to spontaneous endothermic chemical adsorption, confirmed by kinetic and isothermal models and thermodynamic results. CS-A nanofiber pads were of great reusability and easy to be separated. Adsorption mechanisms involved electrostatic attractions, hydrogen bondings, π-stacking interactions, and pore fillings. Dynamic adsorption toward Congo red showed the Thomas model well fitted the breakthrough curves (R2 > 0.9971), showing the maximum adsorption capacity of 949.15 mg/g. Totally, CS-A nanofiber pads were effective adsorbents suitable for organic dye-containing wastewater purification.

Synthesis and characterization of bacterial cellulose composite with graphite and TiO2-ZnO: structural and functional analysis

This research aims to synthesize and characterize a bacterial cellulose (BC)-based composite with graphite and TiO2-ZnO as reinforcement materials using ex-situ synthesis with CTAB as a surfactant. FTIR and SEM-EDS analysis revealed interactions between the matrix and the reinforcement materials, as well as irregular particle distribution in the BC/G-TiO2-ZnO composite. The addition of graphite to BC significantly increased the conductivity of the composite, while the addition of TiO2-ZnO had the opposite effect. The mechanical properties of the composite exhibited an inverse relationship with the conductivity parameter. Swelling tests indicated that pH and the addition of CTAB influenced the swelling behavior of the BC-based composite. The results of this study provide a strong foundation for the development of potential applications in the fields of electronics and pollutant filtration. The synthesis of this composite aims to harness the unique properties of BC, graphite, and TiO2-ZnO, creating a multifunctional material with potential uses in flexible electronics, sensors, biocompatible conductive materials, and advanced filtration systems.

Sperm Cryopreservation in Canaries to Protect Endangered Songbird Species: Comparison of Different Cryoprotectants.

Sperm cryopreservation is a rather complex process that needs to be adapted to wild and domestic bird species to ensure adequate efficiency. This study aimed to determine the usability of different cryoprotectants in the cryopreservation of Gloster canary sperm. For this purpose, sperm samples were collected from 12 2-year-old male Gloster canaries three times a week using cloacal massage for 4 weeks. After individual evaluation, sperm samples from the canaries were combined. Mixed sperm were divided into two groups in the study. Overall, 8% dimethyl sulfoxide (DMSO) and ethylene glycol (EG) were used as cryoprotectants. Sperm samples were drawn into straws after adding Dulbecco's Modified Eagle Medium (DMEM) extender with high glucose ratio and two different cryoprotectants in a 1:1 ratio and frozen to -80°C with liquid nitrogen vapour and then stored in liquid nitrogen at -196°C. Frozen-thawed semen samples were evaluated regarding motility, vitality, plasma membrane integrity (hypoosmotic swelling test [HOST]), density and abnormal spermatozoa rate. The highest motility value after freezing and thawing was determined in the EG group with 31.667%±4.773%. In addition, vitality, plasma membrane integrity and normal sperm morphology were statistically significantly higher in the EG-frozen group, whereas head and tail abnormality was low (p<0.05). This study determined that a DMEM extender containing 8% EG was more advantageous than a DMEM containing DMSO regarding spermatological parameters and could be used for long-term storage of canary sperm.

Manufacturing Radially Aligned PCL Nanofibers Reinforced With Sulfated Levan and Evaluation of its Biological Activity for Healing Tympanic Membrane Perforations.

The main objective of this study is to construct radially aligned PCL nanofibers reinforced with levan polymer and investigate their in vitro biological activities thoroughly. First Halomonas levan (HL) polysaccharide is hydrolyzed (hHL) and subjected to sulfation to attain Sulfated hydrolyzed Halomonas levan (ShHL)-based material indicating heparin mimetic properties. Then, optimization studies are carried out to produce coaxially generated radially aligned Poly(caprolactone) (PCL) -ShHL nanofibers via electrospinning. The obtained nanofibers are characterized with Fourier Transform Infrared Spectroscopy (FTIR)and Field Emission Scanning Electron Microscopy with Energy Dispersive X-Ray (FESEM-EDX) analysis, and mechanical, contact angle measurement, biodegradability, and swelling tests as well. Afterward, cytotoxicity of artificial tympanic membranes is analyzed by MTT (3-(4,5-Dimethylthiazol-2-yl) -2,5 Diphenyltetrazolium Bromide) test, and their impacts on cell proliferation, cellular adhesion, wound healing processes are explored. Furthermore, an additional FESEM imaging is performed to manifest the interactions between fibroblasts and nanofibers. According to analytical measurements it is detected that PCL-ShHL nanofibers i) are smaller in fiber diameter, ii) are more biodegradable, iii) are more hydrophilic, and iv) demonstrated superior mechanical properties compared to PCL nanofibers. Moreover, it is also deciphered that PCL-ShHL nanofibers strongly elevated cellular adhesion, proliferation, and in vitro wound healing features compared to PCL nanofibers. According to obtained results it is assumed that newly synthetized levan and PCL mediated nanofibers are very encouraging for healing tympanic membrane perforations.

Piceatannol Protects Sperm from Cryopreservation Damage by Modulating the Keap1-Nrf2/ARE Signaling Pathway.

The purpose of this study was to explore the mechanism of action of Piceatannol (PIC) in attenuating oxidative damage to sperm during cryopreservation. Semen samples were collected and homogenized into six equal parts for freeze-thawing experiments. Four different concentrations of PIC were utilized as cryoprotectants during the freeze-thawing process, maintaing a semen to PIC ratio of 1:1, while sperm motility after freezing and thawing was analyzed using computer-assisted sperm analysis (CASA). Sperm plasma membrane integrity was assessed via the hypo-osmotic swelling (HOS) test. The levels of reactive oxygen species (ROS), superoxide dismutase (SOD) and total antioxidant capacity (T-AOC) activities, long with the ability to scavenge sperm malondialdehyde (MDA), were examined in sperm following the addition of PIC. Quantitative real-time PCR (qRT-PCR) was performed to detect the expression levels of Keap1, Nrf2, GCLC, GCLM, and HMOX1 in sperm. The mechanism by which PIC protects sperm during cryopreservation from oxidative stress damage was further verified. Treatment with PIC at a dose of 5.0 μmol/L significantly improved both sperm motility and viability while effectively reducing ROS levels in frozen sperm. Additionally, the integrity of the sperm plasma membrane was significantly enhanced. Furthermore, the expression level of Keap1 was significantly reduced, whereas the expression levels of GCLC, GCLM, HMOX1, and Nrf2 were significantly increased (p < 0.05) after the addition of PIC. Notably, a significant attenuation of sperm motility and viability was observed in this treatment group when PIC treatment was accompanied by the addition of an Nrf2 inhibitor, resulting in a significant elevation of ROS levels. The finding that PIC modulates ROS in frozen sperm via the Keap1-Nrf2/ARE pathway thereby enhancing sperm viability levels after freezing and thawing provides a novel approach to optimize semen cryopreservation.

Geological Investigation of Clay Minerals (Swelling) Pt. Upb Antam Pongkor Bogor, West Java, Indoneisa

Rocks containing clay minerals can experience rock deformation when interacting with water, this can also caused by the argillic zone, in the underground tunnel at the Unfoloader 600 and Xc 600 loop 2 ciurug. The argillic process that causes actual material swelling that occurs in field causes rock mass around the mining development area to become weak. The location from tunnel cross cut of Unfoloader 600 and Xc 600 loop 2 contain active clay minerals which high percentage composition of swelling mineral material. The Unfoloader 600 location has a mineral swelling composition of 102.94% with 24 hours, justifying potential very high swelling. The minerals present based on XRD testing 70.8% illite, 25.4% kaolinite, 25.4% kaolinite and 3.8% montmorillonite. Location Xc 600 loop 2 has a mineral swelling composition of 131.25% with 24 hours, justifying potential for very high swelling. The minerals present based on XRD testing illite 49.7%, kaolinite 28.7%, quartz 20.3%, and montmorillonite 1.2%. The values obtained based on laboratory form free swelling tests and XRD that the location experienced of rock deformation, it’s swelling in the mining development area.

Marine durability of carbon black-filled polychloroprene: Effect of seawater ageing on network, tensile and fatigue properties

With the development of marine renewable energies, the durability of materials at sea is more than ever a major issue in reducing the risk of failure of offshore devices. In this aggressive environment, elastomers, and in particular polychloroprene (CR), have many applications because of their good damping and fatigue properties. However, these materials are subject to ageing in service, which leads to changes in their mechanical properties. The ageing of these materials in a marine environment has not been extensively studied, despite the need to predict components lifetimes. This paper investigates the mechanical and microstructural consequences of a carbon black-filled CR degradation when exposed to seawater. To this end, swelling, uniaxial tensile and fatigue tests are carried out on materials previously subjected to accelerated ageing in natural seawater. Particular attention is paid to understanding the physico-chemical phenomena involved, and analysing fracture and fatigue properties in relation to those of the macromolecular network.

On safety of swelled commercial lithium-ion batteries: A study on aging, swelling, and abuse tests

Lithium-ion battery technology has advanced significantly, making these power sources essential for portable electronic devices such as smartphones. In 2023, global smartphone shipments reached nearly 1.2 billion units, underscoring the widespread reliance on these batteries. However, as batteries age, they may swell and potentially pose explosion risks. To investigate the safety of swollen batteries, this study conducts accelerated aging and swelling tests on lithium-ion batteries from five leading brands, which together represent over half of the global smartphone market share. The research involves a series of comprehensive tests, including Accelerated Rate Calorimeters (ARC) test, mechanical, electrical, and thermal abuse tests in accordance with Chinese national standards, as well as gas composition and theoretical flammability analyses on both new and swollen batteries. The findings indicate that swollen batteries generally exhibit safer behavior under floating charging conditions, and both new and swollen batteries pass the abuse tests within the standard framework. This study suggests that the safety of swollen lithium-ion batteries cannot be categorically labeled as dangerous or safe and should be assessed within the context of specific environments.

Bio-Based Self-Healing Epoxy Vitrimers with Dynamic Imine and Disulfide Bonds Derived from Vanillin, Cystamine, and Dimer Diamine.

The condensation reactions of 4,4'-(ethane-1,2-diylbis (oxy)) bis(3-methoxybenzaldehyde) (VV) with cystamine, 1,6-hexamenthylene diamine, and a dimer diamine (PriamineTM 1075) produced three types of vanillin-derived imine-and disulfide-containing diamines (VC, VH, and VD, respectively). Thermal curing reactions of polyglycerol polyglycidyl ether with VD and mixtures of VC/VD and VH/VD produced bio-based epoxy vitrimers (BEV-VD, BEV-VC/VD, and BEV-VH/VD, respectively). The degree of swelling and gel fraction tests revealed the formation of a network structure, and the crosslinking density increased with a decreasing VD fraction. The glass transition temperature, tensile strength, and tensile modulus of the cured films increased as the VD fraction decreased. In contrast, the thermal degradation temperature of the cured films increased as the VD fraction increased. All the cured films were healed by hot pressing at 120 °C for 2 h under 1 MPa at least three times. The healing efficiencies, based on tensile strength after the first healing treatment, were 75-78%, which gradually decreased as the healing cycle was repeated. When imine-and disulfide-containing BEV-VC/VD and imine-containing BEV-VH/VD with the same VC/VD and VH/VD ratios were used, the former exhibited a slightly higher healing efficiency.

Effects of Supplementation of Different Antioxidants to Cryopreservation Extender on the Post-Thaw Quality of Rooster Semen-A Meta-Analysis.

The standardization of the semen cryopreservation technique could be an effective tool in poultry for the conservation of genetic resources. During this process, the production of reactive oxygen species increases, leading to oxidative stress that causes damage to the spermatozoa. To reduce this effect, the addition of exogenous antioxidants in the cryopreservation diluent has been reported to be effective. Multiple antioxidants such as catalase, vitamin E, cysteamine, ergothioneine, and serine have been studied in roosters. Therefore, the present investigation aims to perform a meta-analysis to determine if the use of the aforementioned antioxidants added to the cryopreservation extender produces an improvement in semen quality parameters in roosters after thawing. After collecting the data, a discriminant canonical analysis was performed to determine which of the selected semen quality traits provided the most information, with hypo-osmotic swelling test (HOST), viability, and total motility variables showing the highest discriminatory power. However, according to the descriptive statistics, catalase and serine are the antioxidants that improve a greater number of seminal quality parameters, and since catalase gives the most favorable results for most of the discriminating variables, it could be the antioxidant of choice.

Fiber Alignment's Effect on the Properties of Hybrid Glass/Flax Fiber‐Reinforced Epoxy Composite Laminates

ABSTRACTIn this study, glass fiber and flax fiber reinforced with epoxy and ZnO nanofiller were used to create composites utilizing the hand layup method. The purpose of this study is to develop a novel hybrid polymer‐matrix composite that can be employed in various application areas such as aerospace, sports, medical equipment, railways, etc. The fabricated composite was made with epoxy as a matrix material reinforced with nano‐ZnO, glass fiber, and flax fiber. Six fiber layers with varying fiber orientations were inserted into the matrix in a specific stacking order. The results show the maximum tensile, flexural, impact, and ILSS as the values of 264.74 MPa, 492.12 MPa, 595.72 J/m, and 50.05, respectively. Along with the mechanical properties, Physical characterization such as density, void content, thickness swelling, moisture content, and water absorption tests were conducted. FE‐SEM test was conducted to check the uniformity of nanoparticles in the matrix material and the breakdown of fibers.

Preparation, Swelling, and Drug Release Studies of Chitosan-based Hydrogels for Controlled Delivery of Buspirone Hydrochloride.

Buspirone is used for the management of depression and anxiety disorders. Due to its short half-life and low bioavailability, it requires multiple daily doses and is associated with some side effects. This study aimed to develop chitosan-based hydrogels as drug-controlled release carriers. The objective of this study is to prepare chitosan-based hydrogels as controlled release carriers in order to overcome the side effects of buspirone HCl and improve patients' compliance and their life quality. Polymer chitosan was polymerized with two monomers, acrylic acid and itaconic acid, to synthesize pH-sensitive hydrogel. The Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis were performed to confirm the structure formation and thermal stability. Water penetration capability and loading of the drug were performed by porosity and drug loading studies. The swelling and dissolution tests were performed to analyze the pH-sensitive nature of the developed hydrogels. FTIR, TGA, and DSC demonstrated that the chitosan-based hydrogels were successfully prepared. An increase in water penetration and drug loading into the hydrogel network was seen with the high incorporation of chitosan, acrylic acid, and itaconic acid. The swelling and dissolution studies revealed that prepared hydrogel offered the greatest swelling and drug release at a high pH of 7.4. The swelling and drug release from the hydrogel were affected by the concentrations of the incorporated contents. A controlled release of the drug was achieved by using chitosan-based hydrogel as a delivery carrier compared to commercial tablets of buspirone. The results showed that the developed chitosan-based hydrogel can be considered one of the most suitable drug carrier systems for the controlled delivery of buspirone.

Cyclodextrin-Cholesterol Alone or in Combination With Cyclodextrin-Vitamin E Improves Bull Sperm Cryopreservation in a Soybean Lecithin Extender.

Combining cholesterol-loaded methyl-β-cyclodextrin (CD-CHL) with vitamin E-loaded methyl-β-cyclodextrin (CD-Vit E) to combat cold shock and oxidative stress during sperm cryopreservation in soybean lecithin extenders remains unexplored. Thus, the current study aimed to investigate the effect of treating bull sperm with CD-CHL and CD-Vit E prior to cryopreservation in a soybean lecithin extender. Sperm collected from eight fertile bulls were pooled and split into six aliquots. Five aliquots were treated, in a Tris-based extender, with CD-CHL (2 mg/120 × 106 cells/mL) and either 0, 0.5, 1.0, 1.5 or 2 mg CD-Vit E/120 × 106 cells/mL. The control aliquot was diluted in a Tris-based extender without further supplementation. After incubation at 22°C for 15 min and addition of a soybean lecithin extender, all aliquots were equilibrated for 2 h at 4°C and then cryopreserved in liquid nitrogen. Computer-assisted sperm analysis (CASA) was used to explore the different sperm motility parameters, hypo-osmotic swelling test to determine membrane functionality and fluorescein isothiocyanate-conjugated Aeachis hypogaea (peanut) agglutinin (FITC-PNA) to quantify acrosome integrity. The effect of oxidative stress on the sperm membrane was assessed through lipid peroxidation measurement. Compared to control, CD-CHL alone improved significantly (p < 0.05) all CASA motility parameters, membrane functionality and acrosome integrity of thawed sperm. The membrane functionality was more significantly (p < 0.05) improved when 0.5 mg CD-Vit E was combined with CD-CHL. Concerning lipid peroxidation, no significant differences (p > 0.05) in malondialdehyde (MDA) levels were registered between groups. In conclusion, the combination of CD-CHL and CD-Vit E demonstrated a significant positive effect on the cryopreservation of bull sperm in a soybean lecithin extender.

Effects of Resveratrol-Loaded Cyclodextrin on the Quality Characteristics of Ram Spermatozoa Following Cryopreservation.

This study investigated the effects of pure and methyl-β-cyclodextrin loaded forms of resveratrol (10 µg/mL, 20 µg/mL, and 40 µg/mL) on ram sperm functions post-thawing. Semen samples were pooled and divided into ten groups: Control, RES10, RES20, RES40, CD10, CD20, CD40, RLC10, RLC20, and RLC40. The groups were pre-diluted with media containing the group-specific chemicals, followed by 15 min of incubation, dilution, and freezing. To assess the effects of the chemicals, a post-thaw sperm quality assessment was conducted. Motility and other velocity parameters were evaluated using computer-assisted semen analysis. The functional integrity of spermatozoa membranes was assessed with the hypo-osmotic swelling test, and the capacitation status of spermatozoa was determined through fluorescent microscopic evaluation. Additionally, flow cytometry was used to evaluate mitochondrial activity, oxidative stress, and the integrity of the sperm membrane and acrosome. The results indicated that cyclodextrin adversely affected sperm functions following freezing-thawing, notably increasing the rate of spermatozoa exhibiting pre-capacitation and mitochondrial activity by approximately 34% and 16%, respectively (p < 0.05). It was found that 20 µg/mL resveratrol prevented pre-capacitation (p < 0.05). Both resveratrol and resveratrol-loaded cyclodextrin groups improved post-thaw sperm qualities overall, demonstrating their utility for freezing ram semen. However, higher concentrations of resveratrol were found to negatively impact sperm functions.

A low-swelling alginate hydrogel with antibacterial hemostatic and radical scavenging properties for open wound healing

Development of a low-cost and biocompatible hydrogel dressing with antimicrobial, antioxidant, and low swelling properties is important for accelerating wound healing. Here, a multifunctional alginate hydrogel dressing was fabricated using the D-(+)-gluconic acidδ-lactone/CaCO3system. The addition of hyaluronic acid and tannic acid (TA) provides the alginate hydrogel with anti-reactive oxygen species (ROS), hemostatic, and pro-wound healing properties. Notably, soaking the alginate hydrogel in a poly-ϵ-lysine (EPL) aqueous solution enables the alginate hydrogel to be di-crosslinked with EPL through electrostatic interactions, forming a dense network resembling 'armor' on the surface. This simple one-step soaking strategy provides the alginate hydrogel with antibacterial and anti-swelling properties. Swelling tests demonstrated that the cross-sectional area of the fully swollen multifunctional alginate hydrogel was only 1.3 times its initial size, thus preventing excessive wound expansion caused by excessive swelling. After 5 h ofin vitrorelease, only 7% of TA was cumulatively released, indicating a distinctly slow-release behavior. Furthermore, as evidenced by the removal of 2,2-diphenyl-1-picrylhydrazyl free radicals, this integrated alginate hydrogel systems demonstrate a notable capacity to eliminate ROS. Full-thickness skin wound repair experiment and histological analysis of the healing site in mice demonstrate that the developed multifunctional alginate hydrogels have a prominent effect on extracellular matrix formation and promotion of wound closure. Overall, this study introduces a cost-effective and convenient multifunctional hydrogel dressing with high potential for clinical application in treating open wounds.

Laboratory investigation of the swelling pressure of bentonite with quicklime and hydrated lime using ASTM-4546-96 and constant volume methods

The swelling soils, also known as expansive soils, increase in volume due to an increase in moisture content. The settlement of expansive soils could be the main reason for considerable damage to roads, highways, structures, irrigation channel covers, and the protective shell of tunnels that use bentonite for wall stability. Therefore, it is important to determine the amount of swelling pressure in expansive soils. This research uses two laboratory swelling test methods with constant volume (CVS) and ASTM-4546-96 standard, the swelling pressure of lime-stabilized bentonite soil has been estimated. Based on the key findings of this study, the swelling pressure values of pure bentonite samples tested using the ASTM-4546-96 method, compared to the constant volume swelling test, show an approximately 170% increase.

A novel formulation of an eco-friendly calcium nitrate-based heavy completion fluid

Calcium-nitrate-based transparent completion fluids are widely used in the oil and gas industry for well completion and stimulation operations in carbonate reservoirs. These fluids have many advantages, such as medium density, low corrosion, good temperature stability, low clay swelling, and high wettability. However, the density of calcium nitrate brine is limited by its solubility, which can be increased by the addition of alcohols. This study investigated the effects of adding different types of alcohols (G1, G2, and G3) to calcium nitrate brine on the properties and performance of the completion fluid for carbonate reservoirs. The fluid properties and performance were evaluated through a series of laboratory tests, including density measurement, corrosion test, viscosity measurement, rheology test, temperature stability test, clay swelling test, wettability test, and compatibility test. The results showed that the addition of alcohols to brine can improve or reduce the fluid density, viscosity, corrosion, temperature stability, clay swelling, wettability, and compatibility, depending on the type and amount of alcohols. The optimum fluids have been selected based on their highest density, lowest viscosity, lowest corrosion, highest temperature stability, lowest clay swelling, highest wettability change, and highest compatibility with formation fluids. The densities of the fluids CN4, CNG14, CNG24, and CNG34 were respectively 96, 101, 101.5, and 100 pounds per cubic foot (pcf). Their rates of corrosion on L80 steel were respectively 0.829, 0.589, 0.720, and 0.599 mils per year (mpy). Their apparent viscosities at 62.4 °F were respectively around 15, 120, 100, and 60 centipoise (cp). Their apparent viscosities at 176 °F were all around 10 to 25 mpy. The fluids remained clear with no evidence of suspended solid particles at 20 °F, indicating their resilience to low-temperature conditions and suitability for use in cold weather operations. The fluid CNG24 becomes cloudy at 285 °F, and the fluid CNG34 becomes cloudy from 212 °F onward, but the CN4 fluid remains clear and transparent at all temperatures. In the tested high temperatures, the effect on their pH was around the same. The fluids CN4, CNG24, and CNG34 had a lower swelling index than 5 ml per 2 g of bentonite clay. The contact angles of oil and carbonate-type thin sections after their wettabilities were affected by the fluids were also 99.5, 36.54, and 46.03°, respectively. Finally, they’re all relatively compatible with formation fluids. The best completion fluid for carbonate reservoirs was CNG24, which contained calcium nitrate and G2 alcohol. This fluid had the best overall performance and safety of the fluids tested.

Green Synthesis of ZnO Nanoparticles via Ganoderma Lucidum Extract: Structural and Functional Analysis in Polymer Composites.

Metallic nanoparticles are of growing interest due to their broad applications. This study presents the green synthesis of zinc oxide (ZnO) nanoparticles (ZnNPs) using Ganoderma Lucidum mushroom extract, characterized by DLS, SEM, XRD, and FTIR spectroscopy analyses. The synthesis parameters, including extract/salt ratio and mixing time, significantly influenced nanoparticle yield, size, and polydispersity, with longer mixing times leading to larger, more varied particles. Specifically, the sizes of ZnNPs synthesized at a 1:1 extract/ZnCl2 ratio after 3 h and 24 h were 90.0 nm and 243.3 nm, with PDI values of 48.69% and 51.91%, respectively. At a 1:2 ratio, the sizes were 242.3 nm at 3 h (PDI: 43.19%) and a mixture of 1.5 nm, 117.4 nm, and 647.9 nm at 24 h (PDI: 2.72%, 10.97%, and 12.43%). Polymer films incorporating PVA, chitosan, and ZnNPs were analyzed for their morphological, spectroscopic, and mechanical properties. Chitosan reduced tensile strength and elongation due to its brittleness, while ZnNPs further increased film brittleness and structural degradation. A comparison of the tensile strength of films A and C revealed that the addition of chitosan to the PVA film resulted in an approximately 10.71% decrease in tensile strength. Similarly, the analysis of films B1 and B2 showed that the tensile strength of the B2 film decreased by 10.53%. Swelling tests showed that ZnNPs initially enhanced swelling, but excessive amounts led to reduced capacity due to aggregation. This pioneering study demonstrates the potential of Ganoderma Lucidum extract in nanoparticle synthesis and provides foundational insights for future research, especially in wound dressing applications.