Sustainable Waste Management Solution Research Articles

Waste-to-energy: exploring the roadmap for energy generation from commercial waste in South Africa

Purpose This study aims to investigate the adoption of waste-to-energy (WtE) technologies in South Africa (SA), focusing on identifying the key drivers, barriers and potential solutions for commercial uptake. The ultimate aim is to propose an implementation framework that promotes renewable energy while reducing landfill reliance. Design/methodology/approach A systematic literature review (SLR) of papers published between 2020 and 2023 was conducted to identify factors impacting WtE adoption in SA. The conceptual model developed from the SLR was tested using a qualitative case study approach. Data was collected through 15 semi-structured interviews with commercial entities and WtE experts from four regions of SA. Findings Anaerobic digestion and pyrolysis are identified as the most suitable waste-to-energy technologies in the South African context. Among the financial challenges of WtE in SA, the availability of cheap coal, low landfill tariffs, high capital costs, funding constraints and regressive economic incentives are critical. The lack of government support, insufficient incentives, regulatory burdens, weak policies and limited innovation capacity are considerable non-financial barriers hindering WtE technologies’ growth. The successful adoption of renewable energy also requires adequate infrastructure, increased sustainability awareness and technical expertise. Research limitations/implications Although the sample size is diverse and consists of a range of organisations, it may not capture the thoughts and experiences of other SA businesses in their entirety. It is important to note that the lack of existing research on the implementation, benefits and impacts of WtE technologies limits the authors’ ability to interpret and benchmark the findings of this study. Yet, this study contributes by developing an implementation framework to encourage WtE adoption, recommending policy actions such as regressive taxation on fossil fuels and landfills and promoting renewable energy through subsidies, awareness and energy credits. Practical implications This study provides a practical framework for businesses and policymakers to adopt WtE technologies by addressing key barriers. The research suggests that businesses could reduce waste management costs and generate new revenue streams by adopting anaerobic digestion and pyrolysis. Policymakers are encouraged to disincentivize landfills and promote WtE through financial incentives such as subsidies and energy credits. The implementation framework offers clear recommendations for integrating WtE into SA’s energy and waste management strategies, supporting both sustainability and economic goals. Social implications The main social contribution is the potential for WtE adoption to improve waste management practices and generate new job opportunities within the renewable energy and waste sectors. Originality/value This study provides a novel contribution by developing an implementation framework tailored to SA’s unique regulatory, economic and social contexts. The research highlights the importance of aligning WtE adoption with sustainability goals, reducing reliance on fossil fuels and promoting renewable energy. The framework serves as a practical guide for policymakers, businesses and industry leaders seeking to implement sustainable waste management solutions in SA.

Application of GIS in Introducing Community-Based Biogas Plants from Dairy Farm Waste: Potential of Renewable Energy for Rural Areas in Bangladesh

Dairy production is one of the most important economic sectors in Bangladesh. However, the traditional management of dairy cow manure and other wastes results in air pollution, eutrophication of surface water, and soil contamination, highlighting the urgent need for more sustainable waste management solutions. To address the environmental problems of dairy waste management, this research explored the potential of community-based biogas production from dairy cow manure in Bangladesh. This study proposed introducing community-based biogas plants using a geographic information system (GIS). The study first applied a restriction analysis to identify sensitive areas, followed by a suitability analysis to determine feasible locations for biogas plants, considering geographical, social, economic, and environmental factors. The final suitable areas were identified by combining the restriction and suitability maps. The spatial distribution of dairy farms was analyzed through a cluster analysis, identifying significant clusters for potential biogas production. A baseline and proposed scenario were designed for five clusters based on the input and output capacities of the biogas plants, estimating the location and capacity for each cluster. The study also calculated electricity generation from the proposed scenario and the net greenhouse gas (GHG) emissions reduction potential of the biogas plants. The findings provide a land-use framework for implementing biogas plants that considers environmental and socio-economic criteria. Five biogas plants were found to be technically and spatially feasible for electricity generation. These plants can collectively produce 31 million m3 of biogas annually, generating approximately 200.60 GWh of energy with a total electricity capacity of 9.8 MW/year in Bangladesh. Implementing these biogas plants is expected to increase renewable energy production by at least 1.25%. Furthermore, the total GHG emission reduction potential is estimated at 104.26 Gg/year CO2eq through the annual treatment of 61.38 thousand tons of dairy manure.

The Properties of Bricks Made from Recycled HDPE

Plastic waste, particularly high-density polyethylene (HDPE), poses significant environmental challenges due to its non-biodegradable nature. Recycling HDPE into building materials, such as bricks, offers a sustainable solution to mitigate these impacts. This study investigates the properties of bricks made from recycled HDPE, focusing on their compressive strength, water absorption, and durability. The results indicate that HDPE bricks exhibit superior mechanical properties, including higher compressive strength and lower water absorption compared to traditional clay bricks. These bricks are lightweight, cost-effective, and demonstrate excellent durability, making them a viable alternative for sustainable construction. The research highlights the potential of recycled HDPE bricks in reducing plastic waste and promoting environmental sustainability. The intensifying generation of plastic waste presents a significant environmental challenge worldwide. Plastic waste, due to its non-biodegradable nature, contributes to land and water pollution, requiring the exploration of sustainable waste management solutions. Recycling plastic waste into building materials, such as bricks, offers a potential solution to mitigate environmental impacts. This research aimed to investigate the integration of plastic waste into building materials through a comprehensive study using experimental testing, software analysis, and structural design. The ETAB analysis demonstrated that the HDPE model exhibited lower bending moments and axial loads compared to the concrete model, suggesting superior mechanical properties and load-carrying capacity. This research contributes to the understanding of the behaviour and performance of plastic bricks in structural applications, enabling the development of sustainable and efficient building designs that incorporate plastic waste materials. Key Words: Plastic Waste, Environmental Challenge, Non-Biodegradable, Sustainable Solutions, Experimental Study, Plastic Bricks, Alternative Building Materials, Methodology, Comparable Strength, Plastic Waste Crisis.

Adaptation of Chlorella vulgaris immobilization on rice straw with liquid manure to create a sustainable feedstock for biogas production and potential feed applications

Rice straw (RS) is a widely available agricultural residue with significant potential for biogas production and feed applications; however, its poor digestibility and nutritional value limit its utilization. This study explores an innovative approach to enhance the digestibility and nutritional value of RS by cultivating Chlorella vulgaris through immobilization technology on RS, using liquid manure (LM) as an alternative to the traditional BG11 medium. The results showed an increase in chlorophyll a (Chl a) after 12 days for both the BG11 medium and LM-based treatments, from 0.13 to 0.34 and 0.24 mg Chl a/g product (DM), respectively. Additionally, the immobilized microalgal biomass increased to 284.18 and 170.14 mg algal biomass/g product (DM), respectively. Soaking under microaerobic conditions during cultivation led to the partial degradation of RS. This, combined with the formed microalgal biofilm, contributed to an improved digestibility of the dry matter, reaching 69.1% and 65.9% for the final products based on the BG11 medium and LM mediums, respectively, compared to 52.1% for the raw RS. Furthermore, the crude protein and lipids contents were significantly improved with the potential for applications in feed, reaching 21.4% and 4.1% for the BG11 medium-based product, while they were observed to be 12.8% and 3.0%, respectively, for the LM-based product. Additionally, carbon-to-nitrogen ratio was significantly reduced compared to the raw RS. The higher digestibility and improved nutritional value contributed to increased biogas production, reaching 129.3 and 118.7 mL/g (TS) for the products based on the traditional medium and LM medium, respectively, compared to 86.7 mL/g (TS) for the raw RS. The immobilization mechanism and biofilm development could be attributed to the roughness of the RS and extracellular polymer substances. This study demonstrates that integrating C. vulgaris cultivation on RS with LM as a nutrient source not only enhances the digestibility and nutritional value of RS but also offers a sustainable waste management solution with potential applications in biogas production and animal feed.

Feasibility of Using Ferronickel Slag as a Sustainable Alternative Aggregate in Hot Mix Asphalt

Ferronickel slag (FNS) is a byproduct produced during ferronickel alloy manufacturing, primarily used in the manufacturing of stainless steel and iron alloys. This material is produced by cooling molten slag with water or air, posing significant disposal challenges, as improper storage in industrial yards can lead to environmental contamination. This study investigates the chemical and mineralogical characteristics of reduction ferronickel slag (RFNS) and its potential use as an alternative aggregate in hot mix asphalt (HMA). The research is based on the practical application of HMA containing RFNS in an experimental area, specifically the parking lot used by buses transporting employees of Anglo American, located at the Codemin Industrial Unit in Niquelândia, Goiás, Central Brazil. Chemical analysis revealed that RFNS primarily consists of MgO, Fe2O3, and SiO2, which are elements with minimal environmental impact. The lack of significant calcium content minimizes concerns about expansion issues commonly associated with calcium-rich slags. The X-ray diffractogram indicates a predominantly crystalline structure with minerals like Laihunite and Magnetite, which enhances wear and abrasion resistance. HMA containing 40% RFNS was tested using the Marshall methodology, and a small experimental area was subsequently constructed. The HMA containing RFNS met regulatory specifications and technological controls, achieving an average resilient modulus value of 6323 MPa. Visual inspections conducted four years later confirmed that the pavement remained in excellent condition, validating RFNS as a durable and effective alternative aggregate for asphalt mixtures. The successful application of RFNS not only demonstrates its potential for local road paving near industrial areas but also underscores the importance of sustainable waste management solutions. This research highlights the value of academia–industry collaboration in advancing environmentally responsible practices and reinforces the contribution of RFNS to enhancing local infrastructure and promoting a more sustainable future.

Enhancing biogas production from vinasse through optimizing hydraulic retention time and added load using the response surface methodology

Vinasse, a byproduct of ethanol production from sugarcane, is a rich organic matter and poses environmental challenges due to its high pollutant content. Effective biomethane production from vinasse can mitigate its environmental impact by converting organic matter into a useful energy source while reducing its pollutant load. The biomethane production by anaerobic digestion (AD) process of the vinasse byproduct was examined on a laboratory scale. In this regard, several loads from 0.5 to 7 g VS/L were investigated to assess AD performance and methane production. This study investigated how two separate factors, namely the load and hydraulic retention time (HRT), affect both cumulative methane production (CMP) and methane yield (YCH4). This investigation utilized a response surface methodology known as the central composite design (RSM-CCD). Statistical analysis of variance (ANOVA) was employed to evaluate the effectiveness of the model generated. Thus, the model's fit, YCH4 has a maximum R2 value of 0.9759. The results revealed an astounding level of agreement between the experimental data and the proposed model. The RSM results revealed maximum CMP and YCH4 values of 409.82 ml and 178.95 ml/g VS respectively, obtained for optimum load values of 2.17 g VS/L and HRT of 15 h. The results emphasize the environmental and economic significance of AD, providing a sustainable waste management solution that helps reduce greenhouse gas emissions and organic pollution. Additionally, it generates valuable biogas and biofertilizers, presenting economic opportunities through renewable energy production and resource recovery. This approach not only alleviates the environmental burden of vinasse but also enhances the economic viability of ethanol production by creating additional revenue streams.

The Role of EM4 (Effective Microorganisms) in Solid Waste-Powered Microbial Fuel Cells: Investigating Voltage Output and Electrical Conductivity For Bioelectricity Generation

The increasing global demand for renewable energy and sustainable waste management solutions has inspired interest in microbial fuel cells (MFCs) as a dual-purpose technology for bioelectricity generation and waste treatment. This study explores the role of EM4, a consortium of effective microorganisms, in enhancing the voltage output and electrical conductivity of solid waste-powered MFCs. A batch system bioreactor assessed the impact of varying organic waste-to-zeolite ratios on MFC performance. The results demonstrated that a 1:1 ratio of organic waste to zeolite produced the highest electrical conductivity (3160 µS/cm) and the most substantial voltage output (777.5 mV) by day three of the experiment. Statistical analysis, including ANOVA and Kruskal-Wallis tests, revealed significant differences in voltage output across treatments, with a positive correlation between electrical conductivity and voltage production. These findings highlight the potential of integrating EM4 and conductive materials like zeolite to optimize bioelectricity generation in MFCs, contributing to the advancement of sustainable energy technologies.

Deciphering cleaner and sustainable frontiers in scientific cow waste valorization: a review.

The forecasted global population growthis poised to create a greater exigency for livestock-derived food production,leading to a significant wastegeneration from the industrial-scalelivestockoperations, which necessitates to develop sustainable waste management solutions. The heightened demand for livestock and dairy products has driven a surge in cow waste (CW) production. While CW is typically used as organic fertilizer or solid fuel, improper disposal poses potential environmental hazards. Anaerobic digestion and composting transform CW into valuable products, such as biofuels and organic fertilizers, with the potential for electricity and heat generation, biochar production, and advanced friction materials. The CW contains essential inorganic and organic compounds vital for plant functions, including lignin, cellulose, hemicellulose, nitrogen, and minerals such as potassium, sulfur, iron, magnesium, copper, cobalt, and manganese. Additionally, the rich microbial diversity in cow dung drives the production of bioenergy carriers like biomethane and biohydrogen, promoting cost-effective energy generation and environmental sustainability. This review employs bibliometric analysis to explore the latest trends in CW applications, with a particular focus on innovative applications such as cellulose extraction, biochar production, microbial fuel cells, and nanoparticle synthesis. Itfurther evaluates the environmental impacts of these technologies and assesses their potential to advance sustainable and cleaner frontiers in the valorizationof CW.

Effective methods for the decontamination of healthcare waste: Ozone and UV-C radiation process

ABSTRACT Human-generated waste, including infectious healthcare waste, poses significant risks to public health and the environment. The COVID-19 pandemic has increased the global production of infectious waste, emphasizing the need for safe and sustainable waste management practices. While autoclaves are commonly used for on-site disposal, alternative methods like ozone gas and UV-C radiation offer environmentally friendly options that effectively eliminate pathogens without leaving toxic residues. Inadequate waste management can contribute to disease transmission, while open burning releases harmful pollutants. This study investigated the effectiveness of different disinfection agents – ozone gas and UV-C radiation – on infectious solid waste contaminated with bacteria. The bacterial indicators examined were Staphylococcus aureus, Bacillus subtilis, and Pseudomonas aeruginosa. The experimental methods included operating each ozone and UV-C radiation individually and simultaneously using ozone gas and UV-C radiation. The study also investigated exposure times and various concentrations of ozone gas. The findings demonstrated that the simultaneous application of ozone gas and UV-C radiation was the most effective method for decontaminating infectious solid waste and targeting the selected bacteria. The concentration of ozone gas ranged from 165 to 5000 ppm, depending on generation time and treatment chamber volume, while exposure times varied from 1 to 180 minutes. In applying UV-C rays, complete elimination of S. aureus was observed after 60 minutes up to 6-log, while the reduction of B. subtilis and P. aeruginosa were 2-log and 3-log, respectively. Ozone gas had the ability to inactivate all strains, but when ozone gas and UV-C rays were used simultaneously, this process was accelerated and improved. The total reduction in the bacterial load was 8-log. Considering the increase in population and the subsequent increase in waste generation, adopting an environmentally friendly waste management method can be very advantageous. Implications: This study highlights the effectiveness of simultaneously applying ozone gas and UV-C radiation for decontaminating infectious solid waste, offering an environmentally friendly alternative to traditional thermal treatments like autoclave and incineration. By optimizing ozone concentrations and exposure times, this method reduces disease transmission risks and minimizes environmental impact. These findings are crucial, especially during outbreaks such as the COVID-19 pandemic, providing scalable, sustainable waste management solutions for healthcare facilities. Implementing these techniques can protect public health and the environment, setting a new standard for safe infectious waste disposal worldwide, mitigating hazardous pollutants, and reduce the exposure risk of bio-hazardous residues.

Experimental investigation on a solar-powered oxy-hydrogen gas system for enhanced plastic pyrolysis

The escalating environmental concerns associated with plastic waste have intensified the search for sustainable waste management solutions. Plastic dispersion in the environment poses severe threats to ecosystems, human well-being, and agriculture. Consequently, addressing plastic pollution stands as a pressing ecological concern. In contrast, the adoption of sustainable solar energy is harnessed for the production of HHO (Oxy-Hydrogen) gas, offering a promising avenue for clean energy generation. Gas production is achieved through the process of electrolysis, utilizing solar panels as the primary energy source. To address storage challenges, a spiral pipe configuration is employed for the interim containment of the generated HHO gas. Given the highly flammable nature of HHO gas, stringent safety protocols are imperative throughout the production and storage phases. To ensure the safe handling of HHO gas, a sophisticated MQ-8 Sensor is employed for real-time leak detection within the gas containment system. This sensor plays a critical role in maintaining operational safety by promptly identifying and addressing any potential gas leaks that may arise within the tubing infrastructure. The HHO gas, generated through the electrolysis process, serves as the primary fuel for the pyrolysis of plastic. This optimization is crucial to maximize the efficiency of the pyrolysis process. As a result of the pyrolysis process, crude oil is produced as an intermediary product. This crude oil holds the potential for subsequent refinement, offering versatility for various applications and end uses. Hence, the integration of solar energy-driven HHO gas in the pyrolysis of plastic demonstrates a promising avenue for mitigating plastic waste and contributing to environmental cleanliness. The intricate technological aspects, ranging from gas production through electrolysis, leak detection, optimized combustion, to crude oil production and refinement, collectively establish a comprehensive framework for sustainable waste management and resource recovery.

Inventory of Electronic Waste (E-Waste) and Residues in Junkshops: A Step Towards Residual Waste Management

The improper management of Waste Electrical and Electronic Equipment (WEEE) constitutes a critical global environmental challenge, with a significant proportion of e-waste ending up in landfills, posing substantial ecological and health risks. In the Philippines, particularly in areas like Marilao and Bulacan, many individuals rely on the recycling of e-waste for their livelihoods, primarily through junkshops and informal recycling networks. Despite providing economic benefits, these practices often result in substantial residual waste, exacerbating landfill overflow and environmental degradation. This study aims to establish a detailed e-waste inventory and propose practical strategies for improving residual waste management. This research used a mixed-method approach to collect data via surveys, interviews, and direct observations at selected junkshops in Marilao. The findings enabled a comprehensive categorization of e-waste based on economic value, highlighting "temperature exchange equipment" as the most economically valuable category while identifying "small IT and telecommunication equipment" as the least. Among the significant residual wastes identified were base/black plastics, styrofoam, and glass, which are commonly mishandled. The study proposes several management strategies, including partnerships with local governmental bodies and recycling companies to enhance recycling processes, improving dismantling techniques to reduce waste, and implementing rigorous waste segregation practices to prevent contamination and improve recycling rates. This expansion is critical for a more comprehensive understanding and monitoring of e-waste management practices, facilitating the development of more effective and sustainable waste management solutions. By adopting these strategies, junkshops and informal recyclers can optimize e-waste management, reducing environmental impact while maintaining economic viability.

Rejuvenated end-of-life reverse osmosis membranes for landfill leachate treatment and reuse water reclamation

Landfills remain a prevalent method for municipal solid waste disposal, yet concerns persist regarding leachate generation and its environmental impact. This research paper investigates the reuse of end-of-life reverse osmosis membranes for treating landfill leachate (LL) after their rejuvenation. The rejuvenation process involved a specific chemical cleaning procedure that allows for permeability recovery without compromising the membrane rejection capacity when compared to o pristine reverse osmosis. It was also explored the hypothesis how previous membrane use affects the rejuvenation process by considering end-of-life membranes used for desalination of brackish water and treated water. While both could be effectively rejuvenated, those used for brackish desalination were more susceptible to irreversible fouling. In such cases, recycling the membrane and converting it to porous ultrafiltration or microfiltration membranes is recommended. For membranes previously used for treated water desalination, it was observed high efficiency in LL treatment across multiple filtration cycles. The average flux for these membranes corresponded to 6.9 ± 0.4 L/m2h (operating pressure: 10 bar), and the rejection were greater than 89.4 % for chemical oxygen demand and 98.6 % for color. In complement, it was investigated the contribution of pretreatment with ultrafiltration membranes. Ultrafiltration was effective in preventing membrane fouling and improving the physicochemical quality of reclaimed water from landfill leachate. Overall, this research provides valuable insights into the potential reuse of end-of-life reverse osmosis membranes from treated water desalination plant for LL treatment, contributing to sustainable waste management and wastewater treatment solutions.

Sustainable waste management solutions: Optimization of hybrid and gasification waste-to-energy plants

This study investigates an urban waste management model to integrate different energy generation technologies and waste processing routes in a megastructure with thermal, biological, and recyclable superstructures. The model was simulated for three metropolitan regions in Brazil, with waste transportation between existing landfills to improve energy generation efficiency and financial income. The gasification appears as a promising alternative to the originally modeled hybrid incineration configuration. Results suggest that the overall financial performance of plants benefits when the utilization of the thermal superstructure is restricted in smaller plants, with waste mass flow of less than 6 kg/s. Gasification is preferred for bigger plants, with paybacks of up to 11 years, net present value of 2 billion dollars, and an internal rate of return of 20.32 % in the most likely scenario without subsidies. The study shows significant increase in attractiveness by the utilization of waste-collecting taxes, for which a payback of 6 years was reached, demonstrating it as a financially interesting. The internal rate of return results confirms the economic feasibility of the business for scenarios with waste-collection taxes. Integrating gasification technology in municipal waste management into the megastructure model emerges as a promising approach for sustainable waste management and energy generation.

Application of municipal solid waste (MSW) char during rotary drum co-composting (RDC) of vegetable waste and its characterization.

Composting, a sustainable method for handling biodegradable waste constituting nearly 50% of municipal solid waste (MSW), can be enhanced by incorporating char produced from MSW pyrolysis. This study investigates the impact of MSW char (0% char-Control, 2.5% char-Trial 1, 5% char-Trial 2) on the physicochemical properties of vegetable waste compost. A thermophilic temperature range of 53.8°C was detected in Trial 2, 50.8°C in Trial 1, and 46.8°C in Control. The pH of the mixes increased at day 20 to 7.5, 7.87, and 8.2 in Control, Trial 1, and Trial 2, respectively. The highest drop of total organic carbon (TOC) and volatile solids in Trial 2 is about 21.18% and 21.02%, respectively. Total Kjeldahl nitrogen (TKN) increased, particularly in Trial 2 (2.35%), while NH4-N concentrations decreased, and phosphorus levels rose notably to 23.48mg/kg, with 2.49mg/kg available phosphorus in Trial 2. The C/N was reduced to 10 in Trial 2. Total potassium increase was highest for Trial 1 (6.9g/kg). Trial 2 had the highest overall macronutrient concentration and correspondingly showed the greatest decrease in volatile solids. Furthermore, Trial 1 demonstrated a reduction in heavy metal concentration in comparison to Control and Trial 2. Consequently, the utilization of MSW char during rotary drum composting enhances the process of composting and significantly improves compost quality, making it a sustainable waste management solution.

Sustainable Strategies for Crystalline Solar Cell Recycling: A Review on Recycling Techniques, Companies, and Environmental Impact Analysis

Solar PV is gaining increasing importance in the worldwide energy industry. Consequently, the global expansion of crystalline photovoltaic power plants has resulted in a rise in PV waste generation. However, disposing of PV waste is challenging and can pose harmful chemical effects on the environment. Therefore, developing technologies for recycling crystalline silicon solar modules is imperative to improve process efficiency, economics, recovery, and recycling rates. This review offers a comprehensive analysis of PV waste management, specifically focusing on crystalline solar cell recycling. The classification of PV recycling companies based on various components, including solar panels, PV glass, aluminum frames, silicon solar cells, junction boxes, plastic, back sheets, and cables, is explored. Additionally, the survey includes an in-depth literature review concentrating on chemical treatment for crystalline solar cell recycling. Furthermore, this study provides constructive suggestions for PV power plants on how to promote solar cell recycling at the end of their life cycles, thereby reducing their environmental impact. Moreover, the techno-economic and environmental dimensions of solar cell recycling techniques are investigated in detail. Overall, this review offers valuable insights into the challenges and opportunities associated with crystalline solar cell recycling, emphasizing the importance of economically feasible and environmentally sustainable PV waste management solutions in the constantly evolving solar energy market.

A Comprehensive Review on Biomethane Production from Biogas Separation and its Techno-Economic Assessments.

Biogas offers significant benefits as a renewable energy source, contributing to decarbonization, waste management, and economic development. This comprehensive review examines the historical, technological, economic, and global aspects of biomethane production, focusing on the key players such as China, the European Union, and North America, and associated opportunities and challenges as well as future prospects from an Australia perspective. The review begins with an introduction to biogas, detailing its composition, feedstock sources, historical development, and anaerobic digestion (AD) process. Subsequently, it delves into major biomethane production technologies, including physicochemical absorption, high-pressure water scrubbing (HPWS), amine scrubbing (AS), pressure swing adsorption (PSA), membrane permeation/separation (MP), and other technologies including organic solvent scrubbing and cryogenic separation. The study also discusses general guidelines of techno-economic assessments (TEAs) regarding biomethane production, outlining the methodologies, inventory analysis, environmental life cycle assessment (LCA), and estimated production costs. Challenges and opportunities of biogas utilization in Australia are explored, highlighting and referencing global projections, polarization in production approaches, circularity in waste management, and specific considerations for Australia. The review concludes discussing future perspectives for biomethane, emphasizing the importance of technological advancements, policy support, and investment in realizing its full potential for sustainable energy and waste management solutions.

Development of a System Suitable for an Apartment Complex for the Collective Recovery of Solid Resources from Food Waste: A Study on South Korea

The installation of food waste disposers has been prohibited in South Korea, due to conflicts with governmental policies that are focused on resource recovery from food waste and concerns about potential damage to the city’s sewer system. However, there is a growing demand for such systems in the country. This study proposes a system for the collective recovery of solid resources from food waste tailored for apartment complexes in South Korea, using an innovative solid–liquid separation technology. In the pilot experiment, 49.60% of the solids fed into the system were recovered as solid matter, confirming its practical applicability. Ultimately, a solid resource collective recovery system suitable for the high-rise apartment residence style of South Korea was developed and applied to an actual apartment complex. The final-stage solids were discharged from the system and processed through bio-drying, subsequently exhibiting a combustible material content of 67.06%, higher heating value (HHV) of 4843 kcal/kg, and lower heating value (LHV) of 3759 kcal/kg; moreover, they have the potential to be repurposed as biomass–solid refuse fuel (bio-SFR), compost, feed, and substrate for biogas production. The proposed food waste disposal system not only aligns with governmental policies, but also facilitates the recovery of high-quality resources from food waste, while providing a sustainable waste management solution.

WASTE MANAGEMENT IN THE CONCEPT OF GREEN RECONSTRUCTION OF ECONOMY

The article defined the concept of waste management in the environmental management system. The research analysed the problems of waste management in the environmental management system from point of view by a number of domestic and foreign scientists. As a result, authors outlined the basic components of waste management: strategic planning, prevention of environmental pollution, conservation of resources, minimization of the amount and toxicity of waste generation, choosing the best prevention option, assessment of effects and consequences, decision-making. The research described the system of green reconstruction of economy and formed the basic principles of the green post-war reconstruction that would provide sustainable economic development. The article outlined the concept of post-war green reconstruction which should focus on such areas as: sustainable construction and resource saving; implementation of renewable energy sources; sustainable development of infrastructure; implementation of a waste management system, minimization of residues. The authors grounded five main stages of waste management process under post-war reconstruction of Ukraine: prevention of waste generation, preparation for reuse, processing, other uses, disposal. Sustainable waste management solutions are essential to maintain environmental harmony but, also, they are linked with cost, public response, political constraints, and social norms. Consumers' environmental awareness influence the demand for goods and services and thus reduce the amount of waste. Research argued that local communities should developed own waste prevention strategies and attract environmentally conscious businesses to their territory. State policy should focus consumers for preferring products in packaging/container that is suitable for recycling or reuse (glass), paper bags, eco-bags, used appliances.

Evaluating centrifuged water treatment plant sludge as an adsorbent for nutrients, microorganisms, and heavy metals removal from wastewater

Achieving universal access to clean water, as mandated by SDG 6 – Clean Water and Sanitation, is crucial for supporting human health and environmental sustainability. Water treatment plants generate a by-product known as Water Treatment Plant Sludge (WTPS), comprising organic and inorganic substances. Traditionally, the disposal of WTPS poses environmental risks, including nutrient runoff and heavy metal contamination. This study investigates using centrifuged WTPS, without prior treatment, as an adsorbent to remove contaminants from treated wastewater, offering a sustainable waste management solution. Through comprehensive characterization using Scanning Electron Microscopy, Thermogravimetric Analysis, Fourier Transform Infrared Spectroscopy, and geo-environmental parameter assessment, the research evaluates the adsorption efficacy of WTPS. A factorial design methodology facilitated the systematic examination of adsorption tests. Findings indicate that WTPS exhibits adsorption capacities for phosphorus (q = 0.2 mg g-1), Chemical Oxygen Demand (q = 1.1 mg g-1), and metals under specific conditions. Maximum removal efficiencies for total coliforms and Escherichia coli were achieved with extended contact times, showcasing WTPS's potential as a robust adsorbent. The research demonstrates that centrifuged WTPS can significantly reduce concentrations of metals such as Pb, Co, and Ni (100%), Al (96%), Cu (95%), and Fe (93%) in treated wastewater, presenting a promising approach for enhancing wastewater quality. However, the interaction between WTPS and wastewater resulted in an increased concentration of Mn in the effluent, highlighting the complex dynamics of adsorption processes. In conclusion, centrifuged WTPS emerges as a viable, cost-effective adsorbent, aligning with sustainable waste management practices and circular economy principles.

An Example of a New Approach, New Assessment, New Statistical Inference, and New Conclusions from the Published Research by Nikipelova, O., Pyliak, N., & Hodorchuk, V. (2023). Organic fertilizers in increase of hazelnut yield. Interdepartmental Thematic Scientific Collection of Phytosanitary Safety, (69), 118-128. https://doi.org/10.36495/1606-9773.2023.69.118-128.

Background: The declining availability of traditional organic fertilizers and the need for sustainable waste management solutions have sparked interest in alternative nutrient sources for agriculture. This study investigates the potential of sewage sludge-based biofertilizers in hazelnut (Corylus avellana L.) cultivation, addressing both agricultural productivity and environmental concerns. Objective: To evaluate and compare the effects of sewage sludge-based biofertilizers with traditional organic fertilizers on soil agrochemical properties and assess their environmental safety in hazelnut plantations in the Southern Steppe of Ukraine. Methods: A two-year field experiment (2021-2022) was conducted, comparing six treatments: control (no fertilizer), cattle manure, chicken manure, two formulations of sewage sludge-based biofertilizers, and pure sewage sludge. Soil samples were analyzed for easily hydrolyzable nitrogen, mobile phosphorus and potassium, organic matter content, and ecotoxicity. Advanced statistical analyses, including ANOVA, Tukey's post-hoc tests, paired t-tests, and correlation analyses, were employed to assess treatment effects and temporal changes. Results: Statistically significant differences were observed between fertilizer treatments for all major nutrients (p < 0.05). Sewage sludge-based Biofertilizer No. 1 demonstrated superior performance in increasing soil phosphorus content compared to traditional organic fertilizers (306.30 mg/kg vs. 174.75 mg/kg for cattle manure, p < 0.05). All organic fertilizers, including biofertilizers, significantly improved soil nitrogen content over the two-year period (p < 0.05). Potassium levels showed a significant increase (13.41% year-over-year, p < 0.05), while changes in nitrogen and phosphorus levels suggested positive trends but did not reach statistical significance. Importantly, ecotoxicity levels remained low (E < 1.5) across all treatments, indicating minimal short-term environmental risk. Conclusions: This study provides compelling evidence for the potential of sewage sludge-based biofertilizers as effective and environmentally safe alternatives to traditional organic fertilizers in hazelnut cultivation. The findings have significant implications for sustainable agriculture, waste management, and circular economy practices. However, long-term studies are recommended to fully assess the cumulative effects on soil health, crop productivity, and potential contaminant accumulation. This research contributes to the development of innovative, sustainable fertilization strategies that can address both agricultural productivity and environmental conservation needs.