Sustainable Alternative Energy Source Research Articles

ASSESSMENT OF SOLAR PV OUTPUT PERFORMANCE WITH VARYING TILT ANGLES AND WEATHER DATA FROM ERA5: CASE OF MUNTINLUPA CITY, PHILIPPINES

Abstract. Solar photovoltaic (PV) technology has been gaining popularity in the Philippines as an alternative source of sustainable energy. In such technology, module tilt angle and weather conditions are among the system parameters that have substantial impacts on PV system performance. Previous studies have considered either tilt angles or weather conditions, but not the combined impact of these two parameters on solar PV power output. The objective of this study is to examine the effects of weather variables and tilt angle on the output of solar photovoltaic (PV) systems in Muntinlupa City, the Philippines. Three 120W monocrystalline solar PV panels were used and set up to three different tilt angles (i.e., 5°, 10°, and 15°). The fifth generation of the ECMWF's global climate and weather reanalysis (ERA5) dataset was used to gather hourly weather information such as surface solar radiation, wind speed, wind direction, relative humidity, ambient temperature, and total precipitation. Three principal components (PC), which together account for 95% of the variability, were identified using principal components analysis (PCA), which was used to address multicollinearity among the weather parameters. To assess the effects of tilt angle, time, and PCs on solar PV production, analysis of covariance (ANCOVA) was carried out. Results show that all weather variables, except for wind speed and total precipitation, have a significant impact on solar PV production with configuration producing the best results. Moreover, a significant difference in mean solar PV production was observed among the three tilt angles. From 6:00 AM to 2:00 PM, solar PV output gradually increases and declines thereafter. Outputs this study can help in optimizing the design and configuration of solar PV systems in the Philippines by considering weather variables and module tilt angle. Lastly, this study provides useful information for system designers, installers, and policymakers in improving energy generation and utilization, encouraging the use of renewable energy sources, and advancing sustainable energy objectives.

The sustainable prospect of biodiesel production: Transformative technologies, catalysts from bio-wastes, and techno-economic assessment

Energy is the most significant factor influencing a nation’s economic success, social advancement, and human welfare. The increasing demand for oil and other forms of energy has fuelled the need for sustainable alternative energy sources. In this context, energy-providing biofuel materials are widely considered a sustainable alternative. Biodiesel, among other biofuel materials, is currently recognized as a valuable resource for the transportation sector on a global scale. To fulfill the growing demand for biodiesel and to ensure sustainability, the biodiesel synthesis process must be expedited. Therefore, reviewing and upgrading the technological strategies for biodiesel production is vital. The current review paper summarizes recent technological advancements in the biodiesel production process and the process parameters that influence the biodiesel production yield. Also, the significance of eco-friendly biocatalysts derived from waste biomass and waste metals for enhancing biodiesel yield has been highlighted. Furthermore, a techno-economic analysis and life cycle evaluation of different biodiesels are reviewed to examine their economic viability and environmental sustainability when produced using bio-derived catalysts. Overall, it is recognized from recent improvements in biodiesel synthesis that the processes that use catalysts generated from waste sources might considerably facilitate the transition to a more sustainable and economical biodiesel production.

Eksplorasi Energi Biogas di PT. Biro Teknik Sinar Baru

Energy sources originating from fossil fuels such as petroleum, coal and others cause environmental damage and increase greenhouse gases. Cow dung is a renewable energy source that is rarely used but has many benefits after being produced into biogas which can be used as electricity and gas. The advantages of using livestock manure into biogas include renewable energy, biogas can reduce environmental pollution and reduce greenhouse emissions. In this research, we studied biogas energy exploration at PT Bureau Teknik Sinar Baru. A comparative study of the potential of biogas and LPG from several aspects, namely duration, volume of use, CO gas, and cost, has been carried out with the aim of evaluating the advantages and limitations of each of these energy sources. Based on the test results, biogas is 14 minutes faster, more economical 0.05 liters, and the CO gas produced is 0.20% - 0.33% smaller than LPG for boiling 5 liters of water. In conclusion, this study shows that biogas has the potential to be a cheaper, environmentally friendly and sustainable alternative energy source compared to LPG.

Shading effects in agrivoltaic systems can make the difference in boosting food security in climate change

Photovoltaic (PV) systems play an important role in the sustainable energy transition, but their impact on food security is ambiguous due to the shift in land use from agriculture to energy production. Currently, agrivoltaic is emerging as an alternative sustainable energy source that optimises multifunctional land use by simultaneously supporting electricity generation and agricultural activities. While many studies have extolled the benefits of shade provided by agrivoltaic on crop water balance and evapotranspiration, plant ecological adaptation, such as Shade Avoidance Syndrome (SAS), and its implications for food security remain relatively unexplored. In this context, we have investigated the influence of a panel-generated shadow on chicory crop production in terms of plant biomass yield and its quality for human health under different water irrigation regimes. For each chicory plant, fresh weight and leaf dimensions were measured to estimate edible biomass, while leaf water content, chlorophylls a and b, carotenoids, metabolite profile and antioxidant capacity were evaluated to assess food quality. Our results show that the shading system has a remarkable capacity to increase edible chicory biomass production compared to full sunlight conditions of 69% and 23%, respectively for high water supply and low water supply, and greater capacity to promote pollination ecosystem services. The shade, provided by a well-designed agrivoltaic system, improves SAS and directly increase yield without altering food quality. Thus, agrivoltaic systems can combine renewable energy strategies with food security, while enhancing ecosystem services for human well-being.

Amaranthus hybridus waste solid biofuel: comparative and machine learning studies.

The diminishing supply of fossil fuels, their detrimental environmental effects, and the challenges associated with the disposal of agro-waste necessitated the development of renewable and sustainable alternative energy sources. This study aims at developing bio-briquettes from Amaranthus hybridus waste, with cassava starch as a binder; both are agricultural wastes. Before and following delignification, alkali-treated Amaranthus hybridus (TAHB) and untreated (UAHB) briquettes were evaluated in terms of combustion and physicochemical parameters. FTIR and SEM were utilized to monitor the morphological transformation and bond restructuring of TAHB and UAHB samples. EDXRF was used to assess the Potential Toxic Elements (PTEs) composition and environmental friendliness of both TAHB and UAHB. Furthermore, Adaptive Neuro-Fuzzy Inference System (ANFIS) and fuzzy c-means (FCM) clustering machine learning models were used to optimize the production process and predict the efficiency of bio-briquettes. After delignification, a lower lignin value of 11.47 ± 0.00% in TAHB compared to 12.31 ± 0.01% (UAHB) was recorded. Calorific values of 10.43 ± 0.25 MJ kg-1 (UAHB) and 12.53 ± 0.30 MJ kg-1 (TAHB) were recorded at p < 0.05. EDXRF results showed a difference of 0.016% in Pb concentration in both samples. SEM reveals morphological restructuring, while FTIR reveals a 4 cm-1 difference in the C-O stretch. The root mean square error (RMSE), mean absolute percentage error (MAPE), and mean absolute error (MAE) gave values of 0.0249, 2.104, and, 0.0249; (MAE, training) and 0.0223 (MAE, testing) respectively. This shows that the model's predictions match the reality, thereby suggesting a strong agreement between the predicted and experimental data. The finding of this study shows that delignification-disruption improved the solid biofuel's ability to burn cleanly and sustainably.

Research Progress of Perovskite-Based Bifunctional Oxygen Electrocatalyst in Alkaline Conditions.

In light of the depletion of conventional energy sources, it is imperative to conduct research and development on sustainable alternative energy sources. Currently, electrochemical energy storage and conversion technologies such as fuel cells and metal-air batteries rely heavily on precious metal catalysts like Pt/C and IrO2, which hinders their sustainable commercial development. Therefore, researchers have devoted significant attention to non-precious metal-based catalysts that exhibit high efficiency, low cost, and environmental friendliness. Among them, perovskite oxides possess low-cost and abundant reserves, as well as flexible oxidation valence states and a multi-defect surface. Due to their advantageous structural characteristics and easily adjustable physicochemical properties, extensive research has been conducted on perovskite-based oxides. However, these materials also exhibit drawbacks such as poor intrinsic activity, limited specific surface area, and relatively low apparent catalytic activity compared to precious metal catalysts. To address these limitations, current research is focused on enhancing the physicochemical properties of perovskite-based oxides. The catalytic activity and stability of perovskite-based oxides in Oxygen Reduction Reaction/Oxygen Evolution Reaction (ORR/OER) can be enhanced using crystallographic structure tuning, cationic regulation, anionic regulation, and nano-processing. Furthermore, extensive research has been conducted on the composite processing of perovskite oxides with other materials, which has demonstrated enhanced catalytic performance. Based on these different ORR/OER modification strategies, the future challenges of perovskite-based bifunctional oxygen electrocatalysts are discussed alongside their development prospects.

A Survey on the Assessment of the Public’s Perception of Solar Energy as an Alternative Energy Source in Dar ES Salaam Tanzania

Abstract: Solar energy is considered to be an alternative sustainable energy source in the urban environment. The main aim of this study is to learn what the general public thinks about solar energy. This study‘s main source of inspiration was the dearth of prior research in the area. The questionnaire were prepared to screen for the prevalence of solar energy system users. In total, 100 36 samples were examined for the purposes of this study. The findings revealed that among the respondents, 36, 3636% currently use 36% currently use solar energy for a variety of reasons, including 50% cost savings, 22% environmental sustainability, 17% solar power reliability, and 11% grid access. The findings show that 64 respondents do not currently use solar energy due to a number of reasons, including We found that out of 100 respondents, 70% were aware of the potential benefits of solar energy and only 30% were not. Our study found that 65 respondents’ families had an income of less than one million TZS per month. Therefore, Based on the results it can be concluded that for the general public in the Dar es salaam region, income was acknowledge as a barrier to switching to solar energy as an alternative energy source. The potential of using solar energy in urban areas is highly dependent on urban morphology which affects the level of solar irradiance received by individual buildings. It leads to inefficient design of neighborhoods in terms of solar energy potential. The present study investigates the potential of exploiting solar energy in Dar es Salaam, Tanzania by using numerical modelling of solar irradiance on building roofs and façades. It is shown that there is substantial solar irradiance received by building roofs in all four study neighborhoods and urban morphology has considerable effects on annual solar irradiance. Solar irradiance of different orientations of tilted roofs and façades is subject to seasonality of the solar azimuth angle. It is suggested that such abundant solar energy sources would provide solutions to accommodate the increasing energy demand and to improve living quality in urban areas due to the rapid urbanization of the city.

Advancement of Abiotic Stresses for Microalgal Lipid Production and Its Bioprospecting into Sustainable Biofuels

The world is currently facing global energy crises and escalating environmental pollution, which are caused by the extensive exploitation of conventional energy sources. The limited availability of conventional energy sources has opened the door to the search for alternative energy sources. In this regard, microalgae have emerged as a promising substitute for conventional energy sources due to their high photosynthetic rate, high carbohydrate and lipid content, efficient CO2 fixation capacity, and ability to thrive in adverse environments. The research and development of microalgal-based biofuel as a clean and sustainable alternative energy source has been ongoing for many years, but it has not yet been widely adopted commercially. However, it is currently gaining greater attention due to the integrated biorefinery concept. This study provides an in-depth review of recent advances in microalgae cultivation techniques and explores methods for increasing lipid production by manipulating environmental factors. Furthermore, our discussions have covered high lipid content microalgal species, harvesting methods, biorefinery concepts, process optimizing software tools, and the accumulation of triglycerides in lipid droplets. The study additionally explores the influence of abiotic stresses on the response of biosynthetic genes involved in lipid synthesis and metabolism. In conclusion, algae-based biofuels offer a viable alternative to traditional fuels for meeting the growing demand for energy.

Solar Energy Harnessing Technologies towards De-Carbonization: A Systematic Review of Processes and Systems

Solar energy, derived from the inexhaustible energy of the sun, has emerged as a promising solution to mitigate the environmental challenges posed by fossil fuel consumption and global climate change. This work explores the underlying principles of solar energy exploitation, focusing on energy collection technologies as the primary means of solar energy conversion. The physics of the state-of-the-art mechanisms, the photovoltaic effect, and the advancements that have driven the transformation of solar energy into a viable and sustainable alternative energy source are also examined. Through a comprehensive review of relevant literature and pioneering research, this study highlights the immense potential of solar energy and its role in shaping a cleaner, greener future. Towards de-carbonization, the various exploitation technologies are divided into direct and indirect in order to optimize resource utilization. Accounting for the most important advantages presented, solar-based utilization processes are perhaps the only ones that provide access to energy for all to satisfy their vital needs. As nations continue to embrace solar energy and invest in its development, we move closer to achieving a more sustainable and environmentally friendly world for generations to come.

Kinetic model derived from machine learning for accurate prediction of microalgal hydrogen production via conversion from low thermally pre-treated palm kernel expeller waste

The depletion of fossil fuel sources and increase in energy demands have increased the need for a sustainable alternative energy source. The ability to produce hydrogen from microalgae is generating a lot of attention in both academia and industry. Due to complex production procedures, the commercial production of microalgal biohydrogen is not yet practical. Developing the most optimum microalgal hydrogen production process is also very laborious and expensive as proven from the experimental measurement. Therefore, this research project intended to analyse the random time series dataset collected during microalgal hydrogen productions while using various low thermally pre-treated palm kernel expeller (PKE) waste via machine learning (ML) approach. The analysis of collected dataset allowed the derivation of an enhanced kinetic model based on the Gompertz model amidst the dark fermentative hydrogen production that integrated thermal pre-treatment duration as a function within the model. The optimum microalgal hydrogen production attained with the enhanced kinetic model was 387.1 mL/g microalgae after 6 days with 1 h thermally pre-treated PKE waste at 90 °C. The enhanced model also had better accuracy (R2 = 0.9556) and net energy ratio (NER) value (0.71) than previous studies. Finally, the NER could be further improved to 0.91 when the microalgal culture was reused, heralding the potential application of ML in optimizing the microalgal hydrogen production process.

The Optimization of Savonius Helix Wind Turbine Cut-in Speed with the Variation of Blades-twist Rotor and Number of Blades

Wind turbines are typically classified as Horizontal Axis Wind Turbines (HAWT) or Vertical Axis Wind Turbines (VAWT). VAWT has a superior ability to accelerate from rest to rotation than HAWT, allowing it to rotate the rotor even when the wind speed is low; additionally, the produced torque is relatively high. Using the Savonius helix VAWT is one of the numerous methods for enhancing VAWT performance. The effect of the number of blades and the blade twist of the rotor or the angle of rotation of the blades on the rotor from the bottom end to the top end on the speed cut generated by the VAWT Savonius helix was investigated experimentally. Variations in the number of blades used in the study included 2 and 3 blades, as well as 90°, 180°, 270°, and 360° for the rotor twist blades. In a wind tunnel, data was collected at wind speeds ranging from 0 to 5 m/s. The best performance research results were obtained With three blades, a twist angle of 180 degrees, and a cutting speed of 1.51 m/s. By modifying the Savonius Helix VAWT design in this study, it is possible to increase the efficiency and performance of turbines, mainly when used at low wind speeds, and the potential for using wind energy as a more efficient and sustainable alternative energy source.

Design and Optimization of Microbial Fuel Cells and Evaluation of a New Air-Breathing Cathode Based on Carbon Felt Modified with a Hydrogel—Ion Jelly®

The increased demand for alternative sustainable energy sources has boosted research in the field of fuel cells (FC). Among these, microbial fuel cells (MFC), based on microbial anodes and different types of cathodes, have been the subject of renewed interest due to their ability to simultaneously perform wastewater treatment and bioelectricity generation. Several different MFCs have been proposed in this work using different conditions and configurations, namely cathode materials, membranes, external resistances, and microbial composition, among other factors. This work reports the design and optimization of MFC performance and evaluates a hydrogel (Ion Jelly®) modified air-breathing cathode, with and without an immobilized laccase enzyme. This MFC configuration was also compared with other MFC configuration performances, namely abiotic and biocathodes, concerning wastewater treatment and electricity generation. Similar efficiencies in COD reduction, voltage (375 mV), PD (48 mW/m2), CD (130 mA/m2), and OCP (534 mV) were obtained. The results point out the important role of Ion Jelly® in improving the MFC air-breathing cathode performance as it has the advantage that its electroconductivity properties can be designed before modifying the cathode electrodes. The biofilm on MFC anodic electrodes presented a lower microbial diversity than the wastewater treatment effluent used as inocula, and inclusively Geobacteracea was also identified due to the high microbial selective niches constituted by MFC systems.

Renewable Energy Potential and CO2 Performance of Main Biomasses Used in Brazil

This review investigates the effects of the Brazilian agriculture production and forestry sector on carbon dioxide (CO2) emissions. Residual biomasses produced mainly in the agro-industrial and forestry sector as well as fast-growing plants were studied. Possibilities to minimize source-related emissions by sequestering part of carbon in soil and by producing biomass as a substitute for fossil fuel were extensively investigated. The lack of consistency among literature reports on residual biomass makes it difficult to compare CO2 emission reductions between studies and sectors. Data on chemical composition, heating value, proximate and ultimate analysis of the biomasses were collected. Then, the carbon sequestration potential of the biomasses as well as their usability in renewable energy practices were studied. Over 779.6 million tons of agricultural residues were generated in Brazil between 2021 and 2022. This implies a 12.1 million PJ energy potential, while 4.95 million tons of forestry residues was generated in 2019. An estimated carbon content of 276 Tg from these residues could lead to the production of approximately 1014.2 Tg of CO2. Brazilian biomasses, with a particular focus on agro-forest waste, can contribute to the development of sustainable alternative energy sources. Moreover, agro-waste can provide carbon credits for sustainable Brazilian agricultural development.

Slow pyrolysis of buri palm: Investigation of pyrolysis temperature and residence time effects

The enormous environmental impact of the excessive use of the fossil fuels has prompted researchers to search for an environmentally friendly energy source. In this study, buri palm leaves was utilized to produce biochar and bio-oil using slow pyrolysis. The effects of temperature (T), of (300, 500 and 700 °C) and residence time (RS) of (30, 60 and 90 mins) to pyrolysis products were investigated using a self-design fixed bed reactor. Particularly, the effects of these parameters on the proximate analysis, ultimate analysis, and calculated heating value of biochar were conducted. The results showed that the highest yield in biochar of 68% (T = 300 °C, RT = 90 min) while the bio-oil yield of 46% (T = 500 °C, RS = 90 min) was obtained. It was observed that biochar products increased with residence time but decreasing with the temperature while the bio-oil recovery is as both parameters increase. In addition, fixed carbon, volatile matter, ash, carbon, hydrogen and the higher heating value of biochar were significantly affected by the residence time. The calculated lowest and highest higher heating values of biochar were 16.93 MJ/kg at 300 °C for 30 mins and 28 MJ/kg at 700 °C for 30 mins respectively. Finally, this study presented the viability of buri palm leaves as potential option for sustainable alternative energy sources.

Density-functional quantum computations on bandgap engineering and tuning of optoelectronic properties of MgH2 via Mo doping: Prospects and potential for clean energy hydrogen-storage fuel and optoelectronic applications

With the increasing depletion of conventional energy sources and their detrimental environmental hazards, it is imperative to search for sustainable alternative clean energy sources. In the recent decades, hydrogen has emerged as potential source of clean energy. One of the potential alternatives to achieve the objective is the designing and characterization of materials for hydrogen-storage energy applications. In this regard, metal-bearing hydrides are the most promising candidates. For instance, magnesium-bearing hydrides are the focus of current research work owing to high hydrogen capacity of 7.6 wt%. In this paper, we first time report density functional-based quantum theoretical analysis to explore the potential of Mo-doped magnesium hydrides MgH2:Mo for optoelectronic and hydrogen-storage applications. For the quantum computations of the required optoelectronics and energy storage properties, we employed all-electron methods within generalized gradient approximation (GGA). Besides applying GGA approximation to account for the electronic correlated effects, we employed the Hubbard potential U (= 4 eV) for onsite repulsive Coulomb force. We predict that 10% doping by weight of Mo into MgH2 suppresses its insulating band gap of 4.9 eV to semiconducting band gap of order 3.15 eV for spin up and 0.15 eV for spin down. As such the doping of Mo can tune the the bandgap, structural, electronic and optoelectronic properties of MgH2 considerably for potential applications.

Catalytic pyrolysis of corncob with Ni/CaO catalysts for hydrogen-rich gas: Synthesis modes and catalyst/biomass ratios

With the depletion of traditional fossil fuels, biomass has evolved as a new environmentally friendly and sustainable alternative energy source. Ni/CaO catalysts are promising for CO2 capture and biomass catalytic use. In this study, we examined four different synthesis modes for Ni/CaO catalysts: impregnation method, sol–gel method (citric acid complexation), sol–gel method with propionic acid modification and sedimentation method, and used the catalysts in the pyrolysis of corncob to produce hydrogen-rich gas at 600 °C. According to the results of the fixed-bed experiments, adding the propionic acid modification to the citric acid complexation boosted hydrogen generation by 24.93 vol.%. The global behavior of the catalysts synthesized by the different methods follows the order sol-Ni1/Ca7-P > sol-Ni1/Ca7 > sed-Ni1/Ca7≫imp-Ni1/Ca7-A. At a catalyst/biomass ratio of 2:1, the maximum H2 concentration of 84.45 ± 1.02 vol.% and H2 production of 26.84 ± 1.26 mmol/gbiomass were attained, as well as CO2 concentrations of just 2.08 ± 0.03 vol.%. The H2 production was about 20 times higher than without the addition of the catalyst. Optimizing the synthesis modes and catalyst/biomass ratio produced high-quality hydrogen-rich gas with a high H2 conversion of 88.95 ± 2.20 % and the energy efficiency of 52.73 %.

Potential Use of Industrial Biomass Waste as a Sustainable Energy Source in the Future

Aspects related to the growing pollution of the natural environment and depletion of conventional fossil fuels have become the motive for searching for ecofriendly, renewable, and sustainable alternative energy sources. Particular attention is paid to industrial waste, especially waste of biomass materials, which can be converted into biofuels and energy that meets the growing needs of humanity. The use of biomass for energy purposes is less damaging to the environment, the materials are low-cost, locally available in large quantities, and create employment opportunities for workers in suburban and rural areas around the world. This article discusses issues related to the use of waste biomass materials as renewable energy sources. The current energy situation in the world is analyzed in terms of production, consumption, and investments in green energy. Types of biomass and individual physicochemical and energy properties of waste plant materials obtained for energy purposes are described. Currently available methods of converting biomass into energy, including mechanical, thermal, and biochemical techniques are discussed. The conducted analysis indicates the possibility of using it as a competitive source of electricity and heat. Understanding the properties of biomass materials allows us to understand the right way to use them for energy and reduce the consumption of fossil fuels in the future.

Prospects for Bioenergy Development Potential from Dedicated Energy Crops in Ecuador: An Agroecological Zoning Study

Most climate change mitigation scenarios rely on the incremental use of biomass as energy feedstock. Therefore, increasing the share of alternative sustainable energy sources as biomass is crucial to provide both peak and base electricity loads in future scenarios. The bioenergy potential of Ecuador has been addressed for agricultural by-products but not for dedicated bioenergy crops. Agricultural zoning studies have been developed for food crops but not for energy crops. Currently, the bioenergy share of electricity produced in Ecuador (1.4%) comes mainly from the use of sugar cane bagasse from sugar production. This study aims to identify potential sustainable bioenergy resources for continental Ecuador using agroecological zoning methodologies and considerations regarding land management, food security, in-direct land use change and ecological and climate change risks. The results identified 222,060.71 ha available to grow dedicated bioenergy crops and potential electricity production of 8603 GWh/year; giant reed ranks first with a potential net energy yield of 4024 GWh per year, and Manabí province presents the highest potential with 3768 GWh/year. Large-scale deployment of bioenergy in Ecuador would require the study of sustainability considerations of each project. The species studied are traditional bioenergy crops; research on novel species is encouraged.

Thermodynamic and Economic Evaluation of a Novel Green Methanol Poly-Generation System

Methanol is considered a sustainable alternative energy source due to its ease of storage and high-octane rating. However, the conventional methanol production process is accompanied by resource consumption and significant greenhouse gas emissions. The electrochemical reaction of electrochemically reacted hydrogen (H2) with captured carbon dioxide (CO2) offers an alternative route to methanol production. This paper presents a new green poly-generation system consisting of a parabolic trough solar collector (PTC) unit, an organic Rankine cycle (ORC) unit, a CO2 capture unit, an alkaline electrolysis unit, a green methanol synthesis and distillation unit, and a double-effect lithium bromide absorption refrigeration (ARC) unit. The system mainly produced 147.4 kmol/h of methanol at 99.9% purity, 283,500 kmol/h of domestic hot water, and a cooling load of 1341 kW. A total 361.34 MW of thermal energy was supplied to the ORC by the PTC. The alkaline electrolysis unit generated 464.2 kmol/h of H2 and 230.6 kmol/h of oxygen (O2) while providing H2 for methanol synthesis. Thermodynamic and economic analysis of the system was carried out. The energy and exergy efficiency of the whole system could reach 76% and 22.8%, respectively. The internal rate of return (IRR) for the system without subsidies was 11.394%. The analysis for the methanol price showed that the system was economically viable when the methanol price exceedsed$363.34/ton. This new proposed poly-generation system offers more options for efficiently green methanol production.

A Review on Recent Advances in Bio-Fuel Development

For the concurrent energy researches around the world, the question of energy availability and the effects of global warming have taken on particular importance. This situation creates room for prospective, more modern and sustainable alternative energy sources. In the industrial, automotive and even as a fuel source for power plants, biodiesel can be used as a sustainable alternative energy. This study offers a detailed overview of the use and advancement of bio-diesel as a fuel for the production of renewable energy from material sources. The creation of various bio-diesel mixture combinations and their use in diverse sectors is a key topic covered in this study. In order to use different types of biodiesel in different parts of the world, its physical and chemical properties have been researched. Although the use of biodiesel reduces emissions and pollutants, a specific approach is required to maximise efficiency and effectiveness, both technically and non-technically. However, the use of biodiesel together with the optimization of its properties and parameters demonstrates that this alternative energy is practical and might be used as a sustainable fuel source for the auto industry and electricity generation in the future.