Surface Pressure Isotherms Research Articles

Effects of the ametryn pesticide on biomembrane models based on Langmuir films and giant unilamellar vesicles (GUVs)

The plasma membrane plays a crucial role in regulating various physiological processes within cells, controlling the flow of substances in and out of the cell. It primarily comprises lipids, oligosaccharides, sterols, and proteins, which are responsible for its functionalization. In this study, we utilized 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) to create mono and bilayers as mimetic systems for the lipid structure of cell plasma membranes. This approach constitutes the initial phase of comprehending the impact of contaminants on in vivo systems. Thus, the impact of the pesticide ametryn (AMT) on DPPC monolayers, which were formed using Langmuir films at the air/water interface, as well as on DPPC bilayers formed by giant unilamellar vesicles (GUVs), was investigated. The use of Brewster Angle Microscopy revealed a significant influence of AMT when in the water subphase on the morphology of DPPC aggregates in Langmuir monolayers, whose surface pressure vs. mean molecular area (π-A) isotherms are shifted to larger areas for higher AMT concentrations. Phase modulation infrared reflection-absorption spectroscopy indicated interactions between AMT and DPPC in Langmuir films, specifically involving the phosphate and choline DPPC head groups. Basically, the negatively charged hydrophilic portion of AMT (SCH3) would be oriented towards the DPPC choline group. At the same time, the AMT triazine ring would be positioned closer to the DPPC phosphate group, leading also to a slight disturb of the vertical orientation of the DPPC alkyl chains. In line with the findings from the monolayer experiments, the confocal microscopy images obtained through phase contrast revealed that the presence of AMT resulted in approximately 85 % of the DPPC GUVs losing their phase contrast. This loss can be attributed to the exchange between the inner and outer contents of the DPPC bilayer.

Detailed Study on the Interfacial Interaction between Different Polyoxometalates and Tetronic Block Copolymers Exploring the Langmuir-Blodgett Technique.

Polyoxometalates (POMs) interact with various biologically relevant entities. A basic understanding of this interaction is very important for various applications in the biological field. In this work, the focus is on the study of the interaction between tetronics and Keggin POMs. T701 and T90R4 are the two tetronics considered here; they have different solubilities in water due to different PPO/PEO ratios. The arrangement of PPO and PEO is also different with respect to the central ethylenediamine groups. Three different Keggin-type POMs, phosphomolybdic acid (PMA), phosphotungstic acid (PTA), and silicotungstic acid (STA), with different charge densities are chosen for an elaborate investigation using Langmuir-Blodgett technique. The observation is analyzed thoroughly, which shows both electrostatic interaction and adsorption of POMs on the PPO blocks of the tetronics due to the chaotropic effect, which is responsible for the binding of POMs (in subphase) with the tetronic monolayer. This interaction results in an expanded yet rigid monolayer for POM-tetronic association on the surface. Surface pressure vs mean molecular area isotherm is the key characterization to reach the conclusion. UV-vis spectroscopy, NMR, ITC, ellipsometric studies, FTIR, and SEM also serve as supportive characterization techniques.

Effects induced by η6-p-cymene ruthenium(II) complexes on Langmuir monolayers mimicking cancer and healthy cell membranes do not correlate with their toxicity

The mechanism of chemotherapeutic action of Ru-based drugs involves plasma membrane disruption and valuable insights into this process may be gained using cell membrane models. The interactions of a series of cytotoxic η6-p-cymene ruthenium(II) complexes, [Ru(η6-p-cymene)P(3,5-C(CH3)3-C6H3)3Cl2] (1), [Ru(η6-p-cymene)P(3,5-CH3-C6H3)3Cl2] (2), [Ru(η6-p-cymene)P(4-CH3O-3,5-CH3-C6H2)3Cl2] (3), and [Ru(η6-p-cymene)P(4-CH3O-C6H4)3Cl2] (4), were examined using Langmuir monolayers as simplified healthy and cancerous outer leaflet plasma membrane models. The cancerous membrane (CM1 and CM2) models contained either 40 % 1,2- dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) or 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 30 % cholesterol (Chol), 20 % 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), and 10 % 1,2-dipalmitoyl-sn-glycero-3-phospho-l-serine (DPPS). Meanwhile, the healthy membrane (HM1 and HM2) models were composed of 60 % DPPC or DOPC, 30 % Chol and 10 % DPPE. The complexes affected surface pressure isotherms and decreased compressional moduli of cancerous and healthy membrane models, interacting with the monolayers headgroup and tails according to data from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). However, the effects did not correlate with the toxicity of the complexes to cancerous and healthy cells. Multidimensional projection technique showed that the complex (1) induced significant changes in the CM1 and HM1 monolayers, though it had the lowest cytotoxicity against cancer cells and is not toxic to healthy cells. Moreover, the most toxic complexes (2) and (4) were those that least affected CM2 and HM2 monolayers. The findings here support that the ruthenium complexes interact with lipids and cholesterol in cell membrane models, and their cytotoxic activities involve a multifaceted mode of action beyond membrane disruption.

Enhancing Phototoxicity in Human Colorectal Tumor Cells Through Nanoarchitectonics for Synergistic Photothermal and Photodynamic Therapies.

Phototherapies are promising for noninvasive treatment of aggressive tumors, especially when combining heat induction and oxidative processes. Herein, we show enhanced phototoxicity of gold shell-isolated nanorods conjugated with toluidine blue-O (AuSHINRs@TBO) against human colorectal tumor cells (Caco-2) with synergic effects of photothermal (PTT) and photodynamic therapies (PDT). Mitochondrial metabolic activity tests (MTT) performed on Caco-2 cell cultures indicated a photothermal effect from AuSHINRs owing to enhanced light absorption from the localized surface plasmon resonance (LSPR). The phototoxicity against Caco-2 cells was further increased with AuSHINRs@TBO where oxidative processes, such as hydroperoxidation, were also present, leading to a cell viability reduction from 85.5 to 39.0%. The molecular-level mechanisms responsible for these effects were investigated on bioinspired tumor membranes using Langmuir monolayers of Caco-2 lipid extract. Polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) revealed that the AuSHINRs@TBO incorporation is due to attractive electrostatic interactions with negatively charged groups of the Caco-2 lipid extract, resulting in the expansion of surface pressure isotherms. Upon irradiation, Caco-2 lipid extract monolayers containing AuSHINRs@TBO (1:1 v/v) exhibited ca. 1.0% increase in surface area. This is attributed to the generation of reactive oxygen species (ROS) and their interaction with Caco-2 lipid extract monolayers, leading to hydroperoxide formation. The oxidative effects are facilitated by AuSHINRs@TBO penetration into the polar groups of the extract, allowing oxidative reactions with carbon chain unsaturations. These mechanisms are consistent with findings from confocal fluorescence microscopy, where the Caco-2 plasma membrane was the primary site of the cell death induction process.

Closely Packed Core-Shell Micelle Structures of Double Hydrophilic Miktoarm Star Copolymers at the Air-Water Interface.

The aggregation behavior of amphiphilic block copolymers at the air-water interface has been extensively studied, but less attention was given to that of star copolymers. In this work, we studied the interfacial aggregation behavior of two double hydrophilic pH- and temperature-responsive miktoarm star copolymers of poly[di(ethylene glycol) methyl ether methacrylate]-poly[2-(dimethylamino)ethyl methacrylate] (PDEGMA3-PDMAEMA3 and PDEGMA4-PDMAEMA7, the subscripts denote arm numbers) with different molecular weights. The effects of subphase pH and temperature on the monolayer isotherms and hysteresis curves of the two star copolymers and the morphologies of their Langmuir-Blodgett (LB) films were studied by the Langmuir film balance technique and atomic force microscopy, respectively. At the air-water interface, the two star copolymers tend to form closely packed micelles. These micelles exhibit a core-shell structure, where the small hydrophobic core consists of cross-linker of ethylene glycol dimethacrylate (EGDMA) and the carbon backbones of PDEGMA and PDMAEMA arms and the short hydrophilic shell is composed of di(ethylene glycol) and tertiary amine side groups. With increasing subphase pH, the surface pressure versus molecular area isotherms shift toward larger mean molecular areas as a result of the enhanced interface adsorption of nonprotonated tertiary amine groups. The isotherm shift of PDEGMA3-PDMAEMA3 monolayers is primarily attributed to high density of tertiary amine groups in the shells, while that of PDEGMA4-PDMAEMA7 is mainly attributed to high density of di(ethylene glycol) groups in the shells. The hysteresis degrees in the monolayers of the two copolymers under alkaline and neutral conditions are greater than those under acidic conditions due to the decreased protonation degree of the tertiary amine groups. At 10 °C, the mobility of the shells is poor and the isotherms are located on the right. Above the lower critical solution temperature, di(ethylene glycol) groups contract, which causes a slight shift of the isotherms toward smaller mean molecular areas.

Influence of Surface Roughness on Interfacial Properties of Particle Networks

The behavior of colloidal particles near fluid interfaces has attracted significant scientific interest, as particles minimize the contact area between the two fluid phases, stabilizing interfacial systems. This study explores the influence of surface roughness on the properties of particle monolayers at the air–water interface, focusing on colloidal silica particles and fumed silica particles of similar hydrodynamic diameter. This research involves comparing low-surface-area (LSA) and medium-surface-area (MSA) fumed silica particles with spherical colloidal silica particles (250 nm in diameter). Utilizing a Langmuir trough, the interfacial particle networks are compressed and expanded. Analysis of surface pressure isotherms reveals that fumed silica particle monolayers form networks at a lower particle surface coverage compared to spherical particles. The spherical particle monolayer exhibits a higher apparent surface elasticity, indicating greater resistance to the applied compression compared to fumed silica networks. Additionally, monolayers formed by fumed silica particles display hysteresis even after successive compressions and expansions due to irreversible particle interlocking and the formation of multilayered aggregates. These findings provide insights into the impact of surface roughness on the behavior of particle monolayers at fluid interfaces, offering valuable information for designing and optimizing mechanisms involved in emulsion and foam stabilization.

Dense Monolayer Network Structures of Double Hydrophilic Hyperbranched Copolymers at the Air/Water Interface.

Influences of subphase pH and temperature on the interfacial aggregation behavior of two double hydrophilic hyperbranched copolymers of poly[oligo(ethylene glycol) methacrylate-co-(2-diisopropylamino)ethyl methacrylate] (P(OEGMA-co-DIPAEMA)) at the air/water interface are studied by the Langmuir film balance technique. Morphologies of their Langmuir-Blodgett (LB) films are characterized by atomic force microscopy (AFM). At the interface, P(OEGMA-co-DIPAEMA) copolymers tend to form a dense network structure of circular micelles composed of branching agent-connected carbon backbone cores and mixed shells of OEGMA and DIPAEMA segments (pendant groups). This network structure containing many honeycomb-like holes with diameters of 6-8nm is identified for the first time and clearly observed in the enlarged AFM images of their LB films. Under acidic conditions, surface pressure versus molecular area isotherms of the two copolymers in the low-pressure region show larger mean molecular area than those under neutral and alkaline conditions due to the lack of impediment from DIPAEMA segments. Upon further compression, each isotherm exhibits a wide pseudo-plateau, which corresponds to OEGMA segments being pressed into the subphase. Furthermore, the isotherms under neutral and alkaline conditions exhibit the lower critical solution temperature behavior of OEGMA segments, and the critical temperature is lower when the hyperbranched copolymer contains higher OEGMA content.

Annexin A5 stabilizes matrix vesicle-biomimetic lipid membranes: unravelling a new role of annexins in calcification

Matrix vesicles are a special class of extracellular vesicles thought to actively contribute to both physiologic and pathologic mineralization. Proteomic studies have shown that matrix vesicles possess high amounts of annexin A5, suggesting that the protein might have multiple roles at the sites of calcification. Currently, Annexin A5 is thought to promote the nucleation of apatitic minerals close to the inner leaflet of the matrix vesicles’ membrane enriched in phosphatidylserine and Ca2+. Herein, we aimed at unravelling a possible additional role of annexin A5 by investigating the ability of annexin A5 to adsorb on matrix-vesicle biomimetic liposomes and Langmuir monolayers made of dipalmitoylphosphatidylserine (DPPS) and dipalmitoylphosphatidylcholine (DPPC) in the absence and in the presence of Ca2+. Differential scanning calorimetry and dynamic light scattering measurements showed that Ca2+ at concentrations in the 0.5–2.0 mM range induced the aggregation of liposomes probably due to the formation of DPPS-enriched domains. However, annexin A5 avoided the aggregation of liposomes at Ca2+ concentrations lower than 1.0 mM. Surface pressure versus surface area isotherms showed that the adsorption of annexin A5 on the monolayers made of a mixture of DPPC and DPPS led to a reduction in the area of excess compared to the theoretical values, which confirmed that the protein favored attractive interactions among the membrane lipids. The stabilization of the lipid membranes by annexin A5 was also validated by recording the changes with time of the surface pressure. Finally, fluorescence microscopy images of lipid monolayers revealed the formation of spherical lipid-condensed domains that became unshaped and larger in the presence of annexin A5. Our data support the model that annexin A5 in matrix vesicles is recruited at the membrane sites enriched in phosphatidylserine and Ca2+ not only to contribute to the intraluminal mineral formation but also to stabilize the vesicles’ membrane and prevent its premature rupture.

Enhanced luminescence and electrical conductivity of polymer ultrathin films doped with TiO2 nanoparticles

The chemical polymerization method was used to prepare nanocomposite materials of polyaniline (PANi) and Titanium dioxide (TiO2) nanoparticles. Ultrathin films were deposited by using the Langmuir Blodgett (LB) Technique. Surface Pressure vs mean molecular area isotherms of nanocomposite materials showed an increase in maximum attained surface pressure with variation in nanoparticle doping concentration. Photoluminescence (PL) spectra were taken for LB multilayers deposited on a quartz substrate, an increase in the intensity of PL peaks with increasing doping concentration of TiO2 nanoparticles. The topography of LB monolayer film under atomic force microscopy (AFM) revealed that films were uniformly and densely deposited on the substrate. Phase imaging ensured the presence of nanoparticles in the polymer matrix. Conductive atomic force microscopy (C-AFM) was used to investigate the local electrical properties of nanocomposite LB films. Current-voltage characteristics showed variation in current with changing doping concentrations of TiO2 nanocomposite in PANi matrix. The work presents new insights in analyzing uniformly deposited ultrathin films of the composites which can be probed by C-AFM to reveal local electric properties by understanding topography-current correlation at the nanoscale. The conductive data analysis could be useful for understanding the current flow through the nanostructure surface.

Langmuir–Blodgett films of magnetic nanowires

One-dimensional magnetic nanomaterials are scientifically interesting and of great importance due to their morphology-dependent properties. As a consequence of magnetic interactions between magnetic nanowires (MNWs) their bottom-up assembly remains a tough challenge. For the first time, using the Langmuir–Blodgett (LB) technique, we prepared two-dimensional (2D) large scale LB films of MNWs, which were synthesized by template directed electrodeposition method, on glass substrates. Using a plastic pipette, MNWs dispersed in chloroform were spread on the surface of the pure water subphase in a Teflon trough. After the stabilization of the monolayer, the Langmuir film was compressed and the surface pressure-area isotherm was recorded. By pulling up the substrate through the Langmuir film, mono- and bilayers of MNWs were deposited on the substrates at the target surface pressures of 10 mN/m and 15 mN/m. The surface pressure isotherm and field emission scanning electron microscope (FE-SEM) images showed that MNWs were successfully transformed onto the substrates. FESEM micrographs showed that the assembly of MNWs was different from that of metallic nanowires. Furthermore, the results showed that rotating the substrate by 90 degrees, after the deposition of the first layer, and then depositing the second layer on it does not lead to the creation of a hierarchical structure. These results open up new opportunities for the applications of magnetic nanomaterials in physical and chemical sensors, data-storage media and magnetic switching devices. Besides, this study affords fundamental insights into the formation of magnetic monolayers and multilayers.

Measuring the Adsorption of Electrolytes on Lipid Monolayers.

The interactions between ions and lipid monolayers have captivated the attention of biologists and chemists alike for almost a century. In the absence of experimentally accessible concentration profiles, the electrolyte adsorption remains the most informative quantitative characteristic of the ion-lipid interactions. However, there is no established procedure to obtain the electrolyte adsorption on spread lipid monolayers. As a result, in the literature, the ion-lipid monolayer interactions are discussed qualitatively, based on the electrolyte effect on more easily accessible variables, e.g., surface tension. In this letter, we demonstrate how the electrolyte adsorption on lipid monolayers can be obtained experimentally. The procedure requires combining surface pressure versus molecular area compression isotherms with spreading pressure data. For the first time, we report an adsorption isotherm of NaCl on a lipid monolayer as a function of the density of the monolayer. The leading interactions seem to be the osmotic effect from the lipid head groups in the surface layer and ion-lipid association.

Incorporation of acridine orange and methylene blue in Langmuir monolayers mimicking releasing nanostructures

The efficiency of methylene blue (MB) and acridine orange (AO) for photodynamic therapy (PDT) is increased if encapsulated in liposomes. In this paper we determine the molecular-level interactions between MB or AO and mixed monolayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phospho-(1′-rac-glycerol) (DPPG) and cholesterol (CHOL) using surface pressure isotherms and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS). To increase liposome stability, the effects from adding the surfactants Span® 80 and sodium cholate were also studied. Both MB and AO induce an expansion in the mixed monolayer, but this expansion is less significant in the presence of either Span® 80 or sodium cholate. The action of AO and MB occurred via coupling with phosphate groups of DPPC or DPPG. However, the levels of chain ordering and hydration of carbonyl and phosphate in headgroups depended on the photosensitizer and on the presence of Span® 80 or sodium cholate. From the PM-IRRAS spectra, we inferred that incorporation of MB and AO increased hydration of the monolayer headgroup, except for the case of the monolayer containing sodium cholate. This variability in behaviour offers an opportunity to tune the incorporation of AO and MB into liposomes which could be exploited in the release necessary for PDT.

Interactions between Small Inorganic Ions and Uncharged Monolayers on the Water/Air Interface.

The interaction of several simple electrolytes with uncharged insoluble monolayers is studied on the basis of tensiometric and potentiometric data for the surface electrolyte solution|air. The induced adsorption of electrolyte on the monolayer is determined via a combination of data for equilibrium spreading pressure and surface pressure versus area isotherms. We show that the monolayer-induced adsorption of electrolyte is not only strongly ion-specific but also surfactant-specific. The comparison between the ion-specific effects on a carboxylic acid monolayer at low pH and an ester monolayer shows that the anion series follows the same order while the cation series reverses. The effect of the electrolyte on the chemical potential of the monolayer shows attraction between the surfactant and the ions at low monolayer densities, but at high surface densities, repulsion seems to come into play. In nearly all investigated cases, a maximum of monolayer-induced electrolyte adsorption is observed at intermediate monolayer densities. This suggests specific interactions between the surfactant headgroup and the ions. The Volta potential data for the monolayers are analyzed on the basis of the equations of quadrupolar electrostatics. The analysis suggests that the ion-specific effect on the Volta potential is due to the ion-specific decrement of the bulk dielectric constant of the electrolyte solution. Moreover, we present evidence that in most cases the effect of the electrolyte on the orientation of the adsorbed dipoles cannot be neglected. Instead, the change in the ion distribution in the electric double layer seems to have a small effect on the Volta potential.

Site of the Hydroxyl Group Determines the Surface Behavior of Bipolar Chain-Oxidized Cholesterol Derivatives─Langmuir Monolayer Studies Supplemented with Theoretical Calculations.

Cholesterol oxidation products (called oxysterols) are involved in many biological processes, showing both negative (e.g., neurodegenerative) and positive (e.g., antiviral and antimicrobial) effects. The physiological activity of oxysterols is undoubtedly closely related to their structure (i.e., the type and location of the additional polar group in the cholesterol skeleton). In this paper, we focus on determining how a seemingly minor structural change (introduction of a hydroxyl moiety at C(24), C(25), or C(27) in the isooctyl chain of cholesterol) affects the organization of the resulting molecules at the phase boundary. In our research, we supplemented the classic Langmuir monolayer technique, based on the surface pressure and electric surface potential isotherms, with microscopic (BAM) and spectroscopic (PM-IRRAS) techniques, as well as theoretical calculations (DFT and MD). This allowed us to show that 24-OH behaves more like cholesterol and forms stable, rigid monolayers. On the other hand, 27-OH, similar to 25-OH, undergoes the phase transition from monolayer to bilayer structures. Theoretical calculations enabled us to conclude that the formation of bilayers from 27-OH or 25-OH is possible due to the hydrogen bonding between adjacent oxysterol molecules. This observation may help to understand the factors responsible for the unique biological activity (including antiviral and antimicrobial) of 27-OH and 25-OH compared to other oxysterols.

Cerebrosides lipids and their physical effect on multiple sclerosis membranes.

The myelin sheath is a critical component of the central nervous system (CNS) and peripheral nervous system (PNS). It is a multilamellar membrane consisting of a coiled bilayer that acts as an electrical insulator for nerve impulses traveling along axons between nerve cells. Compared to other membranes in the body, the myelin sheath contains a large lipid fraction in the range of 75-80% of the dry mass, compared to about 50% in other membranes, consisting of many different lipids. The lipids in the myelin sheath play a critical role in membrane stability and compaction. While previous investigations have used model lipid bilayers and monolayers to study their interactions with important proteins including myelin basic protein (MBP) and proteolipid protein (PLP), our understanding of the role of lipid composition on membrane formation thermodynamics and rheology, particularly the effects produced by lipid cerebrosides (Hydroxylated cerebrosides, Non Hydroxylated cerebrosides and Cerebroside sulfatide). In this presentation we study the formation and interfacial dilatational rheology of lipid monolayers. We use a Langmuir trough for both surface pressure versus area isotherms and oscillating area interfacial rheology measurements, all performed at approximately body temperature (37°C). From isotherm data, we calculate differences in the Gibbs free energy of mixing between the four monolayers to show differences in intermolecular interactions and miscibility. These results are used to support observations in interfacial rheology results, where. We also analyze the nonlinear rheological behavior of the monolayers, for example observing in general film softening during compression and expansion. These first oscillatory interfacial rheology measurements of model myelin monolayers, coupled with the thermodynamic analysis of film formation, improve our understanding of the lipid the film properties, and provide clues to how the changes in lipid composition may lead to demyelination.

General adsorption isotherm for polyoxyethylene alkyl ethers CnEOm adsorbed at the water/air surface

An empirical adsorption isotherm model is presented based on fundamental thermodynamic equations of adsorption for the homologous series of the nonionic surfactants polyoxyethylene alkyl ethers (CnEOm) at the aqueous solution surface to determine the surface tension and surface pressure isotherms, surface equation of state, and molar characteristics for the adsorbed surfactant molecules. The new model describes the surface properties of CnEOm much better than the original Langmuir adsorption model used as thermodynamic basis. The analysis of the results shows that the increase of the alkyl chain length n (hydrophobic part) leads to an increase in the adsorption activity, while the increase of hydrophilic head group given by the number of EO units m, leads to a better solubility in water, and hence, to a smaller adsorbed amount. The results also show that the ethylene oxide group mainly influences the molar surface area.

Solvent Quality Dependent Osmotic Pressure of Polymer Solutions in Two Dimensions.

Confined in two-dimensional planes, polymer chains comprising dense monolayer solutions are segregated from each other because of topological interaction. Although the segregation is inherent in two dimensions (2D), the solution may display different properties depending on the solvent quality. Among others, it is well-known in both theory and experiment that the osmotic pressure (Π) in the semidilute regime displays solvent quality dependent increases with the area fraction (ϕ) (or monomer concentration, ρ), that is, Π ∼ ϕ3 for good solvents and Π ∼ ϕ8 for Θ solvents. The osmotic pressure can be associated with the Flory exponent (or the correlation length exponent) for the chain size and the pair distribution function of monomers; however, they do not necessarily offer a detailed microscopic picture leading to the difference. To gain microscopic understanding into the different surface pressure isotherms of polymer solutions under the two distinct solvent conditions, we study the chain configurations of the polymer solution based on our numerical simulations that semiquantitatively reproduce the expected scaling behaviors. Notably, at the same value of ϕ, polymer chains in a Θ solvent occupy the surface in a more inhomogeneous manner than the chains in good solvent, yielding on average a greater and more heterogeneous interstitial void size, which is related to the fact that the polymer in the Θ solvent has a greater correlation length. The polymer configurations and interstitial voids visualized and quantitatively analyzed in this study offer microscopic understanding to the origin of the solvent quality dependent osmotic pressure of 2D polymer solutions.

THE MOLECULAR BEHAVIORS OF CALIXARENES AT THE AIR-WATER INTERFACE: DENSITY FUNCTIONAL THEORY, SURFACE PRESSURE, POTENTIAL, AND EFFECTIVE DIPOLE MOMENT

This study examined the behaviors of Langmuir-Blodgett ultrathin calixarene films at the air-water interface. The Langmuir trough was used to estimate the surface pressure, surface potential, and effective dipole moment of two calixarenes, namely, calix[4]arene (THC4) and calix[8]arene (THC8). The band gap was determined using the density functional theory (DFT). The DFT simulation gave a band gap of 2.28 eV for THC4, confirming that THC4 was an insulator. The surface pressure isotherms of THC4 and THC8 yielded the expected molecular behavior from the gaseous to the solid phases. THC4 and THC8 showed a perpendicular and a parallel orientation in the air-water subphase, respectively. The ∆Vmax values of TCH4 and THC 8 were 205 mV and 141mV, respectively, and their µ﬩max values were 0.147 D and 0.088 D, respectively.

Influence of cytochrome P450 3A4 and membrane lipid composition on doxorubicin activity

Drug resistance is known to depend on the interactions with cell membranes and other molecules such as human cytochromes P450 (CYPs) which are anchored on the endoplasmic reticulum (ER) membrane and involved in the metabolism of anticancer drugs. In this study, we determined the influence from cytochrome P450 3A4 (CYP3A4) on the interaction between the drug doxorubicin (DOX) and Langmuir monolayers mimicking cell membranes. The lipid composition was varied by changing the relative concentrations of cholesterol (Chol), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), 1,2-dipalmitoyl-sn-glycero-3-phosphoethanolamine (DPPE), and L-α-phosphatidylinositol (PI). Three compositions were studied in detail which represented a healthy cell membrane and cancerous cell membranes. DOX induced an expansion in the surface pressure isotherms for all monolayers, with stronger effect for the composition of cancerous cell with a high Chol content, thus confirming the relevance of lipid composition. This effect decreased considerably when CYP3A4 was incorporated with the formation of CYP3A4-DOX complexes, according to results from polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) measurements. Taken together, these results support the hypothesis of CYP3A4 being involved in drug resistance, which may be exploited to design strategies to enhance chemotherapy efficacy.

Effect of Solvents on the Stability of Water-in-Bitumen Emulsions

In this study, the role of the solvent in stabilizing water-in-oil emulsions was investigated below and above the onset of asphaltene precipitation. Two Western Canadian bitumens with significantly different emulsion-stabilizing capacities were evaluated. Water-in-asphaltene/solvent and water-in-diluted bitumen emulsions were prepared with extracted n-heptane-insoluble asphaltenes, toluene, and an alkane (n-pentane, n-heptane, n-decane, n-hexadecane, and cyclohexane). The organic phases were prepared with and without removing any precipitated asphaltenes. The stability of the settled emulsions was assessed in terms of the free water evolved after treatment with heating and centrifugation. Factors that could contribute to emulsion stability were measured including the drop size distribution, water volume fraction, and asphaltene mass surface coverage of the settled emulsions. Surface pressure isotherms of asphaltene films were measured to assess irreversible interfacial film formation in each solvent. In precipitate-free emulsions, emulsion stability was found to increase significantly at the onset of precipitation. The increase in stability was attributed to the increased irreversible adsorption of asphaltenes at the interface as their solubility in the oil phase decreased. Most of the emulsions became less stable at high n-alkane contents as more asphaltenes were precipitated out of solution and the supply of soluble emulsion stabilizers was depleted. The results demonstrate that oils at conditions near the onset of asphaltene precipitation are more likely to experience problematic emulsions. However, it was found that, with low-viscosity solvents, this effect may be mitigated by the presence of the precipitated particles in the emulsion.