Surface Pre-reacted Glass-ionomer Research Articles

Bioactive Self-Polymerizing Resin with Surface Pre-Reacted Glass Ionomer Fillers for Suppressed Enamel Demineralization.

The treatment of damaged enamel surfaces involves modification of the enamel surface with artificial materials or the development of a pseudo-enamel, with research focusing on bioactive and biomimetic materials. In this study, a bioactive auto-polymerizing resin (APR) was developed by adding surface-pre-reacted glass ionomer (S-PRG) fillers of different quantities to APR. Its bioactive effects were evaluated via pH neutralization, ion release, and inhibition of enamel demineralization studies. The pH and fluoride ion release were measured using ion-specific electrodes, revealing that the APR disk with the S-PRG filler immediately neutralized the lactic acid solution (pH 4.0) through ion release. Inductively coupled plasma atomic emission spectrometry revealed that the Sr ion release peaked on the first day, with the other ions following the order F > B > Si > Al > Na, exhibiting a weekly decrease in the same order. Scanning electron microscopy was used to examine the enamel block morphology of the disks after 7 d of incubation, revealing enamel demineralization in disks without the S-PRG filler, whereas no demineralization occurred in disks with the S-PRG filler. APR containing the S-PRG filler demonstrated acid buffering suppressed enamel demineralization and bioactive properties.

Surface Prereacted Glass Ionomer Varnish as a Multifaceted Anticaries Agent: Investigating its Inhibitory Effects on Demineralization and Biofilm Formation on Primary Tooth Enamel

Surface Prereacted Glass Ionomer Varnish as a Multifaceted Anticaries Agent: Investigating its Inhibitory Effects on Demineralization and Biofilm Formation on Primary Tooth Enamel

Inhibitory Effects of Surface Pre-Reacted Glass Ionomer Filler Eluate on Streptococcus mutans in the Presence of Sucrose.

The surface pre-reacted glass ionomer (S-PRG) filler is a type of bioactive functional glass that releases six different ions. This study examined the effects of the S-PRG filler eluate on Streptococcus mutans in the presence of sucrose. In a solution containing S. mutans, the concentrations of BO33-, Al3+, Sr2+, and F- were significantly higher in the presence of the S-PRG filler eluate than in its absence (p < 0.001). The concentrations of these ions further increased in the presence of sucrose. Additionally, the S-PRG filler eluate significantly reduced glucan formation by S. mutans (p < 0.001) and significantly increased the pH of the bacterial suspension (p < 0.001). Bioinformatic analyses revealed that the S-PRG filler eluate downregulated genes involved in purine biosynthesis (purC, purF, purL, purM, and purN) and upregulated genes involved in osmotic pressure (opuAa and opuAb). At a low pH (5.0), the S-PRG filler eluate completely inhibited the growth of S. mutans in the presence of sucrose and significantly increased the osmotic pressure of the bacterial suspension compared with the control (p < 0.001). These findings suggest that ions released from the S-PRG filler induce gene expression changes and exert an inhibitory effect on S. mutans in the presence of sucrose.

Surface Pre-Reacted Glass-Ionomer Eluate Suppresses Osteoclastogenesis through Downregulation of the MAPK Signaling Pathway.

Surface pre-reacted glass-ionomer (S-PRG) is a new bioactive filler utilized for the restoration of decayed teeth by its ability to release six bioactive ions that prevent the adhesion of dental plaque to the tooth surface. Since ionic liquids are reported to facilitate transepithelial penetration, we reasoned that S-PRG applied to root caries could impact the osteoclasts (OCs) in the proximal alveolar bone. Therefore, this study aimed to investigate the effect of S-PRG eluate solution on RANKL-induced OC-genesis and mineral dissolution in vitro. Using RAW264.7 cells as OC precursor cells (OPCs), TRAP staining and pit formation assays were conducted to monitor OC-genesis and mineral dissolution, respectively, while OC-genesis-associated gene expression was measured using quantitative real-time PCR (qPCR). Expression of NFATc1, a master regulator of OC differentiation, and the phosphorylation of MAPK signaling molecules were measured using Western blotting. S-PRG eluate dilutions at 1/200 and 1/400 showed no cytotoxicity to RAW264.7 cells but did significantly suppress both OC-genesis and mineral dissolution. The same concentrations of S-PRG eluate downregulated the RANKL-mediated induction of OCSTAMP and CATK mRNAs, as well as the expression of NFATc1 protein and the phosphorylation of ERK, JNK, and p38. These results demonstrate that S-PRG eluate can downregulate RANKL-induced OC-genesis and mineral dissolution, suggesting that its application to root caries might prevent alveolar bone resorption.

Bioactivity of human dental pulp-derived stem cells with boron-controlled S-PRG filler eluate by anion exchange.

Surface pre-reacted glass-ionomer (S-PRG) filler is a bioactive glass filler capable of releasing various ions. A culture medium to which was added an S-PRG filler eluate rich in boron was reported to enhance alkaline phosphatase (ALP) activity in human dental pulp-derived stem cells (hDPSC). To clarify the role of boron eluted from S-PRG fillers, the modified S-PRG filler eluate with different boron concentrations was prepared by using an anion exchange material. Therefore, elemental mapping analysis of anion exchange material, adsorption ratio, hDPSCs proliferation and ALP activity were evaluated. For statistical analysis, Kruskal-Wallis test was used, with statistical significance determined at p<0.05. ALP activity enhancement was not observed in hDPSC cultured in the medium that contained the S-PRG filler eluate from which boron had been removed. The result suggested the possibility that an S-PRG filler eluate with controlled boron release could be useful for the development of novel dental materials.

Influence of surface pre-reacted glass-ionomer (S-PRG) filler eluate on collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin

ObjectiveTo evaluate the effect of ions released from surface pre-reacted glass-ionomer (S-PRG) filler on collagen morphology, remineralization, and ultimate tensile strength (UTS) of demineralized dentin. Materials and methodsBovine incisor root dentins were demineralized with EDTA and divided into three treatment groups: 1) water (control); 2) S-PRG filler eluate; 3) 125 ppm sodium fluoride (NaF). After a 3-min treatment, the specimens were stored in simulated body fluid (SBF) for 3 months. Collagen morphology and remineralization were assessed using transmission electron microscopy (TEM), scanning electron microscopy (SEM), and Fourier-transform infrared spectroscopy (FTIR). Additionally, ultimate tensile strength (UTS) was measured. ResultsTEM and SEM demonstrated that S-PRG induced more effective remineralization compared to NaF, while the control group exhibited faint mineral deposition with collagen degradation. S-PRG displayed the most homogenous mineral deposition in collagen fibrils, along with closure of interfibrillar spaces. Extensive mineral precipitation was observed within dentinal tubules in the S-PRG group. In addition, S-PRG filler eluate demonstrated significantly higher phosphate-to-amide ratio and UTS compared to NaF and control groups (p < 0.05). ConclusionsIon released from S-PRG filler positively influenced collagen morphology, remineralization, and ultimate tensile strength of demineralized dentin. Clinical significanceS-PRG filler enhances remineralization and improve the biomechanics of demineralized dentin.

Effect of borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate studied using solid-state nuclear magnetic resonance and X-ray diffraction

ObjectivesApatite minerals can have various anions and cations in their crystal structure in addition to phosphate ion (PO₄³⁻) and calcium ion (Ca2+). The aim of this study is to investigate effects of the borate, fluoride and strontium ions on biomimetic nucleation of calcium phosphate. MethodsNano-crystalline hydroxyapatite (H-Ap) was obtained from a supersaturated buffered solution containing 4.12 mM HPO42- and 5.88 mM Ca2+ (H-Ap). Four additives were used in solid solution methods: (i) 0.588 mM F- (F-Ap), (ii) 5.88 mM Sr2+ (Sr-Ap), (iii) 4.12 mM BO33- (BO3-Ap), and (iv) a surface pre-reacted glass ionomer (S-PRG) filler eluate that contained 0.17 mM Sr2+, 0.588 mM F-, 11.1 mM BO33-- (SPRG-Ap). Apatite crystallization was investigated using a solid-state magic-angle spinning NMR spectroscopy and X-ray diffraction (XRD) with the Rietveld analysis. ResultsA 2D 1H–31P heteronuclear-correlation NMR showed F- ion incorporation in the apatite structure of the F-Ap and SPRG-Ap. The peaks on the 31P axis of the F-Ap, Sr-Ap, and BO3-Ap were different from that of the H-Ap, and the full width at half maximum increased in the following order: H-Ap∼F-Ap∼BO3-Ap< SPRG-Ap< Sr-Ap, suggesting the incorporation of the F-, Sr2+ and BO33-. The incorporation of F and BO3 was further confirmed by 19F and 11B NMR. The XRD revealed that Sr2+ was preferentially incorporated into the CaII site. SignificanceThe F-, Sr2+ and BO33-ions might be involved in modifying the crystallization of apatite precipitation, producing a variety of apatite. S-PRG filler that release these ions may have an effect on remineralization, i.e., the reformation of apatite lost due to caries.

Effect of an In-Office Bleaching Agent with Surface Pre-Reacted Glass-Ionomer Filler on the Enamel Surface: A In-Vitro Study.

In-office bleaching with high concentrations of hydrogen peroxide (H2O2) agents causes undesirable alterations in the enamel. Surface pre-reacted glass-ionomer (S-PRG) filler is a functional material known for its acid-neutralizing and demineralization-inhibition properties. This study evaluates the effect of S-PRG filler incorporation in H2O2-based bleaching on the enamel surface. Bovine enamel surfaces were bleached using a bleaching paste formulated with a liquid (35% H2O2) and a powder containing 5% or 10% S-PRG filler. The surface roughness and the Vickers microhardness of the treated enamel surfaces were evaluated. The enamel surfaces were observed under a scanning electron microscope (SEM) and analyzed using energy dispersive X-ray (EDX) technology. The surfaces were challenged by citric acid and observed by SEM. The specimens bleached with the paste containing the S-PRG filler showed lower enamel surface roughness and higher microhardness values than did those bleached with the plain paste (0% S-PRG filler); meanwhile, there were no significant differences between the 5% or 10% S-PRG filler groups. The S-PRG filler groups showed enamel surface morphologies similar to those of the non-bleached enamel, according to SEM observation, and EDX analysis detected the presence of fluoride and strontium ions. The S-PRG filler groups showed a higher resistance to erosion. The S-PRG filler mitigated the detrimental effects of bleaching agents on the enamel surface and provided resistance to erosion.

In vitro remineralization assessment of enamel subsurface lesions using different percentages of surface reaction-type pre-reacted glass-ionomer containing gum-based material

ObjectiveTo identify the remineralization activity of enamel subsurface lesions using different percentages of surface pre-reacted glass-ionomer (S-PRG) filler containing gum-base material. MethodsGum extracts from gum-base materials containing 0wt%, 5wt%, and 10wt% S-PRG filler were prepared as GE0, GE5, and GE10, respectively. A total of 50 bovine enamel specimens were used, and the polished enamel surface of a 3 × 3 mm2 window area was exposed. The specimens were then subjected to a demineralization solution for seven days to create a subsurface enamel lesion. Remineralization was then conducted for seven days using a protocol whereby the specimens were immersed three times a day in prepared gum extracts (0wt%, 5wt%, and 10wt%) and artificial saliva of pH 7 (Control) for 20 min at 37 °C. Thereafter, remineralization assessment was performed by using Swept Source Optical Coherence Tomography (SS-OCT) and micro-computed tomography (μCT). Surface morphology and elemental analysis were conducted by scanning electron microscopy (SEM) and energy-dispersive X-ray spectrometry (EDS). ResultsThe depths of the demineralized lesions in the GE5 and GE10 groups were significantly lower than those of the Control and the GE0 groups. SEM observations of the enamel surface morphology of the GE5 and GE10 groups indicated remineralization with S-PRG filler-related elements present. ConclusionThe GE5 and GE10 S-PRG filler containing gum-base materials showed significantly improved surface remineralization and reduced demineralization of the enamel lesions. EDS analysis suggested that the released ions from the S-PRG filler might be responsible for surface remineralization. Clinical significanceThe S-PRG filler containing gum-base material may have a significant remineralization effect and improve the surface morphology of enamel subsurface lesions.

Salivary fluoride concentrations following toothbrushing with experimental toothpaste containing surface pre-reacted glass-ionomer (S-PRG) filler.

Single-blind 9 case comparative studies were conducted to evaluate salivary fluoride concentrations following toothbrushing using experimental toothpaste containing surface pre-reacted glass-ionomer (S-PRG) fillers. Preliminary tests were conducted in order to determine the volume of usage as well as the concentrations (wt %) of S-PRG filler. Based on the results given these experiments, we compared the salivary fluoride concentrations following toothbrushing with 0.5g of 4 different types of toothpastes: 5 wt % S-PRG filler, 1400ppm F AmF (amine fluoride), 1500ppm F NaF (sodium fluoride), and MFP (monofluorophosphate) containing toothpaste. Of the 12 participants, 7 participated in the preliminary study and 8 in the main study. All participants brushed their teeth using the scrubbing method for 2min. At first, 1.0 and 0.5g of 20 wt % S-PRG filler toothpastes were used to compare, then followed by 0.5g of 0 (control), 1, and 5 wt % S-PRG toothpastes, respectively. The participants spat out once and rinsed with 15mL of distilled water for 5s. Saliva was collected for 3min each at different time intervals of 0 (baseline), 5, 10, 15, 30, 60, 120, and 180min after the rinsing. Fluoride concentrations were determined using a fluoride electrode, and the area under the salivary clearance - time curve (AUC: ppm‧min) of each toothpaste was calculated as the salivary fluoride retention. The main study was then conducted to evaluate the salivary fluoride concentrations as well as the AUC value using 0.5g of 5 wt % S-PRG filler toothpaste, followed by NaF, MFP, and AmF toothpastes. Since there were no statistical differences between using 1.0 and 0.5g of 20 wt % S-PRG toothpastes in salivary fluoride concentrations as well as the AUC value throughout the 180min measurement, the volume was set as 0.5g for the following studies. Concentrations of 5 and 20 wt % S-PRG toothpastes retained 0.09ppm F or more in saliva even after 180min. No statistical differences were seen in the salivary fluoride concentrations at any time intervals as well as the AUC value between 5 and 20 wt % S-PRG toothpastes. Based on these results, the concentration of 5 wt % S-PRG toothpaste was used for the main comparative study. MFP toothpaste resulted in by far the lowest salivary fluoride concentrations (0.06ppm F at 180min) and the AUC value (24.6ppm‧min), whereas 5 wt % S-PRG toothpaste (0.15ppm F at 180min, 92.3ppm‧min) displayed retention on par with AmF toothpaste which appeared to result in higher values (0.17ppm F at 180min, 103ppm‧min), compared to NaF toothpaste (0.12ppm F at 180min, 49.3ppm‧min). The salivary fluoride concentrations following toothbrushing with 0.5g of 5 wt % S-PRG filler containing toothpaste showed retention similar to the best performing 1400ppm F AmF toothpaste even 180min after toothbrushing.

Multiple-Ion Releasing Bioactive Surface Pre-Reacted Glass-Ionomer (S-PRG) Filler: Innovative Technology for Dental Treatment and Care

Surface Pre-Reacted Glass-ionomer (S-PRG) filler, which releases strontium (Sr2+), borate (BO33-), fluoride (F-), sodium (Na+), silicate (SiO32-), and aluminum (Al3+) ions at high concentrations, is a unique glass filler that are utilized in dentistry. Because of its multiple-ion releasing characteristics, S-PRG filler exhibits several bioactivities such as tooth strengthening, acid neutralization, promotion of mineralization, inhibition of bacteria and fungi, inhibition of matrix metalloproteinases, and enhancement of cell activity. Therefore, S-PRG filler per se and S-PRG filler-containing materials have the potential to be beneficial for various dental treatments and care. Those include restorative treatment, caries prevention/management, vital pulp therapy, endodontic treatment, prevention/treatment of periodontal disease, prevention of denture stomatitis, and perforation repair/root end filling. This review summarizes bioactive functions exhibited by S-PRG filler and its possible contribution to oral health.

Clinical evaluation of the remineralizing effect of a mouthguard and paste containing S-PRG filler on white spot lesions

White spot lesions (WSLs) are frequently observed on young permanent teeth. The aim of this clinical study was to evaluate the remineralizing effect of paste and a mouthguard containing surface pre-reacted glass-ionomer (S-PRG) filler by observing and measuring lesion area. A total of 14 children (age range, 8–16 years) with WSLs involving 74 teeth attending Asahi University Medical & Dental Center were examined. Color- and size-matching stickers (Cas Match™, Bear Medic) were photographed with involved teeth. Mouthguards made of an S-PRG filler-containing ethylene-vinyl acetate sheet (sample; SHOFU) with S-PRG filler-containing paste (PRG Pro-Care Gel®; SHOFU) (PRG MG-Paste group) or without paste (PRG MG group; control) were applied to WSLs at bedtime. No teeth required restoration due to caries progression during the experimental period. Mean reductions in lesion area at 6 months after treatment in the PRG MG-Paste group and PRG MG group were 1.66 ± 1.84 mm2 and 0.81 ± 1.27 mm2, respectively. Significant differences were observed between groups (p < 0.05). No significant difference in area reduction was seen between kinds of teeth involved, although significant differences in area reduction were observed among individual subjects. These results suggest that combined use of S-PRG filler-containing paste and a mouthguard is effective for remineralization of WSLs observed on numerous teeth.

Effect of Particle Sizes and Contents of Surface Pre-Reacted Glass Ionomer Filler on Mechanical Properties of Auto-Polymerizing Resin.

Herein, the mechanical properties of an auto-polymerizing resin incorporated with a surface pre-reacted glass ionomer (S-PRG) filler were evaluated. For this, S-PRG fillers with particle sizes of 1 μm (S-PRG-1) and 3 μm (S-PRG-3) were mixed at 10, 20, 30, and 40 wt% to prepare experimental resin powders. The powders and a liquid (powder/liquid ratio = 1.0 g/0.5 mL) were kneaded and filled into a silicone mold to obtain rectangular specimens. The flexural strength and modulus (n = 12) were recorded via a three-point bending test. The flexural strengths of S-PRG-1 at 10 wt% (62.14 MPa) and S-PRG-3 at 10 and 20 wt% (68.68 and 62.70 MPa, respectively) were adequate (>60 MPa). The flexural modulus of the S-PRG-3-containing specimen was significantly higher than that of the S-PRG-1-containing specimen. Scanning electron microscopy observations of the specimen fracture surfaces after bending revealed that the S-PRG fillers were tightly embedded and scattered in the resin matrix. The Vickers hardness increased with an increasing filler content and size. The Vickers hardness of S-PRG-3 (14.86-15.48 HV) was higher than that of S-PRG-1 (13.48-14.97 HV). Thus, the particle size and content of the S-PRG filler affect the mechanical properties of the experimental auto-polymerizing resin.

Impact of surface pre-reacted glass ionomer filler eluate on lipase gene expression in Candida albicans: An in vitro study.

Although a surface pre-reacted glass ionomer (S-PRG) exerts a suppressive effect on Candida albicans (C. albicans) activity and growth, its influence on the expression of the lipase gene (LIP) family including LIP1-LIP10, an indicator of clinical infection, has not yet been investigated. Therefore, in this study, we evaluated the effect of S-PRG filler eluates on LIP expression in C. albicans using real-time reverse-transcription polymerase chain reaction. Candida albicans was treated with an S-PRG filler diluted at ratios of 1:32 and 1:64 for 24 h at 37°C. The diluted S-PRG filler eluates (1:32) suppressed lipase activity in C. albicans by downregulating LIP5 (0.54±0.25 relative to that of the control) and LIP8 (0.35±0.074) expression after 24 h, which corresponded with decreased lipase activity. At a dilution factor of 1:64, there was no significant difference in LIP expression. Thus, the S-PRG filler eluate has potential to suppress fungal activity by downregulating LIP expression.

Bacterial adhesion and antibacterial property of coating materials containing theobromine and S-PRG filler.

Theobromine (TB) has been reported to promote tooth remineralization, strengthen tooth substance, and relieve dentin hypersensitivity. This study aimed to evaluate experimental tooth coating materials containing TB and surface pre-reacted glass-ionomer (S-PRG) fillers by examining the effects on bacterial adhesion and antibacterial properties. In addition, the amount of TB eluted from the coating material was measured. There was no significant difference in bacterial adhesion depending on the presence or absence of TB in the coating material, however, a significant decrease in the amount of bacterial adhesion was observed when S-PRG fillers were added to the coating material. The amount of eluted TB did not differ depending on the type of the filler in the coating material. It was suggested that TB could be used to develop a new dental material with the potential ability to inhibit the initiation and progression of dental caries.

Effects of mouthguard and paste containing S-PRG filler on remineralization of artificial subsurface carious lesions

The aim of this in vitro study was to evaluate the remineralization effects of ethylene-vinyl acetate (EVA) sheet (sample; SHOFU) and paste (PRG Pro-Care Gel®; SHOFU) containing surface pre-reacted glass-ionomer (S-PRG) filler. Extracted human premolars were decalcified to create subsurface carious lesions on the buccal side. Decalcified tooth specimens were then covered by EVA sheets with two different S-PRG filler contents either with application of paste (PRG MG-Paste and EVA MG-Paste groups) or without application of paste (PRG MG and EVA MG groups), then immersed in a remineralization solution. Control group teeth were not covered with any mouthguard and did not receive application of paste. Micro-CT (μCT) images of the teeth before and after the remineralization process were obtained to compare mineral gains. The percentage remineralization (%R) of each group was calculated using the mineral density (MD) profile from μCT. The microstructure of the tooth surface was observed under scanning electron microscopy, and constituent elements were examined using an electron probe micro-analyzer. The PRG MG group showed a significantly higher %R than the Control or EVA MG groups. The PRG MG-Paste group showed a significantly higher %R than the PRG MG group. In the PRG MG-Paste group, small precipitations were observed on tooth surface, and silica and aluminum were detected. The combination use of S-PRG filler containing EVA sheet and PRG Pro-Care Gel exhibits a synergetic effect on remineralization of pre-cavitation carious lesions.

Effect of S-PRG particles on demineralization and remineralization of dentin: a clinical case report

It is known that the production of acid by oral bacteria dissolves mineral phases on the enamel surface, facilitating the formation of dental caries, with lactic acid being the main cause of caries, followed by acetic and propionic acids. Fluoride-containing materials play an important role in preventing demineralization and remineralization and these are widely used in dentistry. Although the benefits of fluoride in terms of reducing the incidence of dental caries are well established, fluoride cannot prevent caries in all patients; thus, the development of new anti-caries agents with remineralization properties is necessary. Thus, new products are emerging with this purpose and in this article, a material with Surface Pre Reacted Glass ionomer (S-PRG) particles will be addressed, these are produced by the acid-base reaction of fluoroboroaluminosilicate glass and polyacrylic acid and are known to have a potential to release 06 ions, such as Al, B, Na, Si, Sr and F, where these released ions played an important role in pH neutralization, leading to inhibition of enamel demineralization early point, where strontium (Sr) is becoming as a strong inducer of dentin matrix remineralization. Thus, this work aimed to demonstrate with a clinical case using S-PRG materials that can become an ally in the remineralization of the dental element. In conclusion, among the innovations that promote the concept of preventive and minimally invasive management, the bioactivity containing S-PRG can avoid invasive and definitive procedures such as tooth extraction.

Effect of Surface Pre-Reacted Glass Ionomer Containing Dental Sealant on the Inhibition of Enamel Demineralization.

The effect of a surface pre-reacted glass ionomer (S-PRG)-containing sealant on the demineralization inhibition and remineralization of intact enamel adjacent to the sealant material was investigated. BeautiSealant (BTS, S-PRG sealant, Shofu), Teeth Mate F-12.0 (TMF, fluoride-releasing sealant, Kuraray Noritake Dental), and an experimental silica-filler sealant were investigated. After pH cycling for 10 days, the enamel surface adjacent to the sealant material was observed using confocal laser microscopy and scanning electron microscopy. The polymerized sealant disks were immersed in a demineralized solution (pH: 4.3) to measure pH change. The enamel specimens with polymerized sealant disks were additionally immersed in demineralized solution, followed by energy-dispersive X-ray spectroscopy. The demineralized area of BTS was significantly smaller than that of TMF and SS (p &lt; 0.05). The surfaces adjacent to the sealant of TMF and SS were demineralized, while the surface of BTS was comparatively intact. An increase in pH values were observed in the BTS and TMF groups. Enamel surfaces presented an inhibition of demineralization for BTS and TMF, but not for SS. Fluoride uptake from the polymerized sealant was greater for BTS than for TMF. The S-PRG-containing sealant showed a buffering ability, demineralization inhibition, promotion of remineralization, and it can be advised for clinical applications.

The effect of giomer’s preheating on fluoride release

Background: Secondary caries occur due to imperfect plaque control. Prolong the protective and therapeutic effects can be done with restorative materials that release fluoride. Now composite resins have been developed a new restorative hybrid material with new matrix component, namely giomer. Giomer composition containing surface pre reacted glass ionomer (S-PRG) as a major source of fluoride production. Increasing the mechanical strength and minimize microleakage to prevent secondary caries can be done with preheating treatment. Purpose: This study is conducted to determine the effect of preheating temperature on the release of giomer’s fluoride. Methods: This study used 9 cylindrical samples in 10 mm diameter and 2 mm thickness each group, divided into 3 groups and 3 subgroups. Group 1: preheating at 37°C for 30 minutes. Group 2: preheating at 60°C for 30 minutes. Group 3: as a control group (without preheating treatment). Each group divided into 3 subgroups immersion, on day 1, day 7 and day 14 with artificial saliva. Fluoride release test was conducted by Spectrophotometer. IBM's SPSS Statistics used for the Data analysis. Results: The addition of preheating treatment decrease the amount of fluoride release. One-way ANOVA test showed a significant difference (P &lt; 0.05). A significant difference between groups and sub groups showed in LSD test (P &lt; 0.05). Conclusion: The group without preheating treatment has highest fluoride release and the 60°C preheating treatment group was the lowest. Addition of preheating treatment may increase the mechanical strength and minimize microleakage, but also descrease the amount of fluoride release.

Methylene Blue Penetration of Resin Infiltration and Resin Sealant in Artificial White-Spot Lesions.

This study determined the potency of resin infiltrations and resin sealant in impeding microleakage on artificial white-spot lesions (AWL) by methylene blue penetration. Eighty AWL specimens were randomly separated into two groups for water storage for 24 hours (groups 1-4) and 20,000 cycles of thermocycling (TC) (groups 5-8). Each group was then separated into four subgroups (n = 10) based on the AWL surface treatments: (1) no Tx, (2) treated with resin infiltration (ICON, DMG, Hamburg, Germany), (3) treated with resin infiltration (Surface pre-reacted glass-ionomer (S-PRG) barrier coat, SHOFU, Kyoto, Japan), (4) treated with resin sealant (Clinpro sealant, 3M ESPE, Minnesota, United States). Nail varnish was covered to all samples, with the exception of a 4 × 4 mm2 patch on the buccal measurement region, which was subsequently submerged in a 2% methylene blue solution and cut into buccolingual sections. Stereomicroscope measurements were used to calculate methylene blue penetration scores. The Kruskal-Wallis test and the Bonferroni post-hoc correction were performed to evaluate the data. Application of resin infiltrants and resin sealant reduced microleakage in AWL by methylene penetration both before and after thermal cycling. In addition, group 6 (ICON + TC) and group 7 (S-PRG + TC) had a significantly different value from group 8 (sealant + TC). Both the resin infiltration approach and the resin sealant seem to help seal AWL and might perhaps offer long-term defense against microleakage in AWL caused by methylene blue penetration. The greatest sealing and defense for microleakage in AWL were demonstrated by the resin infiltrations.