Excitation Of Surface Plasmon Resonance Research Articles

Localized surface plasmon resonance (LSPR) excitation on single silver nanoring with nanoscale surface roughness

With the expansion of the application of high-sensitivity Surface-enhanced Raman scattering (SERS) technique, micro SERS-active substrates with rich optical properties and high-level functions are desired. In this study, silver nanorings with nanoscale surface roughness were fabricated as a new type of enclosed quasi-2D micro-SERS-active substrate. Highly-crystalline spherical and hemispherical silver nanoprotrusions were densely and uniformly distributed over the entire surface of the nanorings. The SERS signals were significantly enhanced on the roughened silver nanorings which were mainly derived from the maximal localized surface plasmon resonance (LSPR) points at the junctions between adjacent coupled nanoprotrusions on the roughened nanorings. The mapping image shows a uniform and intense LSPR enhancement over the nanorings, owing to the uniform and dense distribution of silver nanoprotrusions and the resulting uniform distribution of maximal LSPR points on the roughened nanorings. The dark-field spectra further indicated that the single roughened silver nanoring had significant LSPR enhancement, a wide LSPR frequency-range response, and adaptability for SERS enhancement. Notably, both the measured and simulated results demonstrate that the maximal LSPR enhancement at the junctions between the nanoprotrusions, which are distributed on the inner surface of the silver nanoring, is higher than that on the outer surface because of the plasmon-focusing effect of the enclosed silver nanoring, which leads to the lateral asymmetrical distribution of LSPR intensity, indicating more LSPR and SERS features. These results indicate that single roughened silver nanorings exhibit excellent performance as a new type of enclosed quasi-2D silver nanoring micro-SERS-active substrate, microzone LSPR catalysis, and micro/nanodevices.

Tunable polarization control with self-assembled arrays of anisotropic plasmonic coaxial nanocavities

Polarization control with nanostructures having a tunable design and allowing inexpensive large-scale fabrication is important for many nanophotonic applications. For this purpose, we developed and experimentally demonstrated nanostructured plasmonic surfaces based on hexagonal arrays of anisotropic coaxial nanocavities, which can be fabricated by a low-cost self-assembled nanosphere lithography method. Their high polarization sensitivity is achieved by engineering anisotropy of the coaxial nanocavities, while the optical response is enhanced by the excitation of surface plasmon resonances. Particularly, varying the geometrical parameters of the coaxial nanocavities, namely the height and tilt angle of their central core nanoellipsoids, the plasmonic resonance wavelengths as well as the polarization-selective behavior can be individually tuned in the entire visible and near-infrared spectral regions, which makes such nanostructures good candidates for the implementation of polarization-controlled optical switches and polarization-tunable filters. Moreover, the developed nanostructures demonstrate sensitivity up to 1335 nm/RIU in refractive index sensing.

Nanopore arrays with TMOKE-enhanced high performance sensing

Magneto-plasmon sensing structure based on surface plasmon resonance (SPR) and magneto-optical (MO) effect has become a hot research topic in recent years. In this work, we propose a magneto-plasmon crystal consisting of an Au/Co double-layer nanoporous structure with optically thick Au film as a substrate. Due to the excitation of high-quality SPR, a Fano-like transverse magneto-optical Kerr (TMOKE) spectrum with subnanometer bandwidth is realized. A sensitivity of up to 677 nm RIU−1 is detected under subtle refractive index changes in air, and all the calculated figure of merits (FOM) are higher than 104 RIU−1. In addition, in order to highlight the superiority of the sensing performance of the MO plasmon (MOSPR) sensor, we compare the MOSPR sensor with the SPR sensor and calculate their FOM in different refractive index environments. The results show that the FOM of the MOSPR sensor is two orders of magnitude higher than that of the SPR sensor, which proves that the performance of the MOSPR sensor is significantly better than that of the SPR sensor and provides a theoretical basis for biosensing and gas detection based on magneto plasmon.

Differentiating Plasmon-Enhanced Chemical Reactions on AgPd Hollow Nanoplates through Surface-Enhanced Raman Spectroscopy.

Plasmonic photocatalysis demonstrates great potential for efficiently harnessing light energy. However, the underlying mechanisms remain enigmatic due to the transient nature of the reaction processes. Typically, plasmonic photocatalysis relies on the excitation of surface plasmon resonance (SPR) in plasmonic materials, such as metal nanoparticles, leading to the generation of high-energy or "hot electrons", albeit accompanied by photothermal heating or Joule effect. The ability of hot electrons to participate in chemical reactions is one of the key mechanisms, underlying the enhanced photocatalytic activity observed in plasmonic photocatalysis. Interestingly, surface-enhanced Raman scattering (SERS) spectroscopy allows the analysis of chemical reactions driven by hot electrons, as both SERS and hot electrons stem from the decay of SPR and occur at the hot spots. Herein, we propose a highly efficient SERS substrate based on cellulose paper loaded with either Ag nanoplates (Ag NPs) or AgPd hollow nanoplates (AgPd HNPs) for the in situ monitoring of C-C homocoupling reactions. The data analysis allowed us to disentangle the impact of hot electrons and the Joule effect on plasmon-enhanced photocatalysis. Computational simulations revealed an increase in the rate of excitation of hot carriers from single/isolated AgPd HNPs to an in-plane with a vertical stacking assembly, suggesting its promise as a photocatalyst under broadband light. In addition, the results suggest that the incorporation of Pd into an alloy with plasmonic properties may enhance its catalytic performance under light irradiation due to the collection of plasmon-excitation-induced hot electrons. This work has demonstrated the performance-oriented synthesis of hybrid nanostructures, providing a unique route to uncover the mechanism of plasmon-enhanced photocatalysis.

A plasmonic metasurface reveals differential motility of breast cancer cell lines at initial phase of adhesion

A plasmonic metasurface composed of a self-assembled monolayer of gold nanoparticles allows for fluorescence imaging with high spatial resolution, owing to the collective excitation of localized surface plasmon resonance. Taking advantage of fluorescence imaging confined to the nano-interface, we examined actin organization in breast cancer cell lines with different metastatic potentials during cell adhesion. Live-cell fluorescence imaging confined within tens of nanometers from the substrate shows a high actin density spanning < 1 μm from the cell edge. Live-cell imaging revealed that the breast cancer cell lines exhibited different actin patterns during the initial phase of cell adhesion (∼ 1 h). Non-tumorous MCF10A cells exhibited symmetric actin localization at the cell edge, whereas highly metastatic MDA-MB-231 cells showed asymmetric actin localization, demonstrating rapid polarization of MDA-MB-231 cells upon adhesion. The rapid actin organization observed by our plasmonic metasurface-based fluorescence imaging provides information on how quickly cancer cells sense the underlying substrate.

Photonic crystal fiber sensors to excite surface plasmon resonance based on elliptical detection channels are used for highly sensitive magnetic sensing

To improve the detection performance of fiber optic magnetic field sensors a new photonic crystal fiber (PCF) based on surface plasmon resonance (SPR) was designed and investigated. The designed sensor uses an elliptical detection channel, and the modal transmission characteristics and magnetic field sensing characteristics of this fiber optic sensor are analyzed using the full vector finite element method (FVFEM). In addition, the effect of the detection channel on the detection accuracy at different curvatures was investigated. Compared with previous optical fiber magnetic field (MF) sensors, the designed sensor meets the requirements of both refractive index (RI) and MF measurements, and the MF sensitivity, RI sensitivity, and amplitude sensitivity (AS) of the sensor reach 0.739 nm/Oe, 12043.8 nm/RIU, and 754.88RIU−1, respectively. The designed sensor expands the application range of optical fiber sensors and reduces the cost. It has great potential for application in complex environments.

The conductivity effect of the top coating on optical properties of thin Cu(Ag)-layered structures

This study examines the optical properties of thin Cu (Ag)-layered structures covered with protective layers based on graphene, titanium (TiO2), or aluminium (Al2O3) oxides. The objective is to investigate the impact of these coatings on the optical behaviors of underlying metallic layers, specifically in the spectral range of excitation of surface plasmon resonances. Combining the methods of spectroreflectometry and spectro-ellipsometry was used to analyze the optical characteristics of the hybrid metal-oxide-graphene films. The study shows that graphene, due to its exceptional electrical conductivity and unique optoelectronic properties, significantly modifies the optical behavior of investigated structures. It includes notable changes in refractive and absorption indices, and optical conductivity indicating potential for enhancing light-matter interactions in plasmonic-graphene layered structures with the aim to apply as biosensor. It is important that addition of TiO2 and Al2O3 layers has also strong effects on the optical properties, which are relevant to their respective applications in the fields of optoelectronics and microelectronics. Employing the effective medium approximation and the Tauc–Lorentz model promotes deeper understanding the interplay between interband and intraband electronic transitions at the nanoscale level. It was revealed that the layer thickness of constituted materials and their individual dielectric functions together with addition of a graphene monolayer commit the significance for altering the optical properties of hybrid layered structures. The obtained results are important for the fields of plasmonics and nanotechnology, providing insights for designing sensors and devices with improved optical characteristics.

Visible-NIR surface plasmon resonance sensing technology for high precision refractive index detection.

Molybdenum disulfide (MoS2), as a representative transition metal disulfide material, has contributed significantly to the development of plasmonic technology toward the near-infrared (NIR). In this Letter, the physical mechanism of MoS2 excitation of surface plasmon resonance (SPR) in the NIR is investigated, and it is shown that the MoS2 film can induce the resonance dip to move toward the NIR and demonstrate a sensitivity higher than that in the visible band. A dual-channel SPR sensor capable of operating in the visible and NIR bands for refractive index (RI) detection was also prepared using the cascade method. The simulated and experimental results of the sensor show consistency. The experimental results show that the maximum sensitivity of the NIR detection channel is 14600 nm/RIU in the RI range of 1.333-1.420, which is 37% higher than the sensitivity of the visible channel. However, the visible channel has the advantage of a narrow FWHM. Therefore, the proposed cascaded dual-channel RI sensor combines high sensitivity and narrow FWHM. This dual-channel construction method improves the detection level of RI, promotes the development of SPR sensing technology to the NIR band and significantly improves the narrowband problem existing in the previous multi-channel sensing.

Triple Play of Band Gap, Interband, and Plasmonic Excitations for Enhanced Catalytic Activity in Pd/HxMoO3 Nanoparticles in the Visible Region.

Plasmonic photocatalysis has been limited by the high cost and scalability of plasmonic materials, such as Ag and Au. By focusing on earth-abundant photocatalyst/plasmonic materials (HxMoO3) and Pd as a catalyst, we addressed these challenges by developing a solventless mechanochemical synthesis of Pd/HxMoO3 and optimizing photocatalytic activities in the visible range. We investigated the effect of HxMoO3 band gap excitation (at 427 nm), Pd interband transitions (at 427 nm), and HxMoO3 localized surface plasmon resonance (LSPR) excitation (at 640 nm) over photocatalytic activities toward the hydrogen evolution and phenylacetylene hydrogenation as model reactions. Although both excitation wavelengths led to comparable photoenhancements, a 110% increase was achieved under dual excitation conditions (427 + 640 nm). This was assigned to a synergistic effect of optical excitations that optimized the generation of energetic electrons at the catalytic sites. These results are important for the development of visible-light photocatalysts based on earth-abundant components.

Plasmonic‐assisted Electrocatalysis for CO2 Reduction Reaction

AbstractIntegrating plasmonic features as an emerging strategy for enhancing electrocatalysis for the carbon dioxide reduction reaction (CO2RR). The key parameters responsible for the enhanced electrocatalysis performance are the local heating, the hot carriers, and near‐field enhancement induced by localized surface plasmon resonance (LSPR, that is, plasmonic) excitation. This review provides a concise overview of the fundamental mechanism of CO2RR, detailing the generation and decay of plasmonic and the energy transfer dynamics between plasmonic nanostructures and adsorbates. It further involves recent progress in plasmonic‐assisted electrocatalysis for CO2RR, including experimental and theoretical research to decipher plasmonic mechanisms. Finally, it ends with an insightful discussion of the existing challenges and potential future directions in this field.

Plasmon-induced hot carrier distribution in a composite nanosystem: role of the adsorption site.

The generation of hot carriers (HCs) through the excitation of localized surface plasmon resonance (LSPR) in metal nanostructures is a fascinating phenomenon that fuels both fundamental and applied research. However, gaining insights into HCs at a microscopic level has posed a complex challenge, limiting our ability to create efficient nanoantennas that utilize these energized carriers. In this investigation, we employ real-time time-dependent density functional theory (rt-TDDFT) calculations to examine the creation and distribution of HCs within a model composite system consisting of a silver (Ag) nanodisk and a carbon monoxide (CO) molecule. We find that the creation and distribution of HCs are notably affected by the CO adsorption site. Particularly, when the CO molecule adsorbs onto the hollow site of the Ag nanodisk, it exhibits the highest potential among various composite systems in terms of structural stability, enhanced orbital hybridization, and HC generation and transfer. Utilizing a Gaussian laser pulse adjusted to match the LSPR frequency, we observe a marked buildup of hot electrons and hot holes on the C and O atoms. Conversely, the region encompassing the C-O bond exhibits a depletion of hot electrons and hot holes. We believe that these findings could have significant implications in the field of HC photocatalysis.

The impact of a dopant atom on the distribution of hot electrons and holes in Au-doped Ag nano-clusters.

The generation of hot carriers (HCs) through the excitation of localized surface plasmon resonance (LSPR) in metal nanostructures is a fascinating phenomenon that fuels both fundamental and applied research. In this study, we employ first principles real-time time-dependent density-functional theory (rt-TDDFT) calculations to elucidate the creation and distribution of HCs within Au-doped Ag nanoclusters: Ag11Cl3P7H21, Ag10AucoreCl3P7H21, and Ag10AusurfCl3P7H21 nanoclusters. Our findings indicate that adjustments in HC distribution are achievable through the Au dopant atom, and precise control of HC distribution is possible by manipulating the location of the Au dopant atom. When employing a Gaussian laser pulse tailored to match the LSPR frequency, a substantial accumulation of HCs in the Ag-P bond is observed. This finding suggests a weakening of the Ag-P bonds and, consequently, the initiation of bond stretching. We propose that these findings open up possibilities for tuning HCs in Au-doped chemically functionalized Ag nanoclusters.

Evaluations of ethylene glycol and polyethylene glycol aqueous solutions using a hybrid sensor of surface plasmon resonance and quartz crystal microbalance

A hybrid sensor based on surface plasmon resonance (SPR) and quartz crystal microbalance (QCM) was prepared. One of the electrodes of the QCM sensor had a grating structure to enable SPR excitation. The SPR property was investigated through the transmission of the visible-light spectrum. The theoretical calculation showed that the experimental values almost corresponded to the theoretical ones; this suggests that the transmitted light dips were due to SPR. In order to investigate the usefulness of this hybrid sensor, the characteristics of SPR and the oscillation frequency drops of QCM (ΔF QCM) were investigated for aqueous solutions of ethylene glycol and polyethylene glycols with various degrees of polymerization. The position and slope of the SPR dip wavelength and the ΔF QCM curves depended on the degree of polymerization, suggesting that the sensor can be used to evaluate a solution property and/or discriminate a solute material.

Nano-Impact Single-Entity Electrochemistry Enables Plasmon-Enhanced Electrocatalysis

Plasmon-enhanced electrocatalysis (PEEC), based on a combination of localised surface plasmon resonance excitation and electrochemical bias applied to plasmonic material, can result in improved electrical-to-chemical energy conversion compared to conventional electrocatalysis.1 Here, we demonstrate the advantages of nano-impact single-entity electrochemistry (SEE) over conventional ensemble electrochemical measurements for investigating the intrinsic activity of plasmonic catalysts towards PEEC at the single-particle level using glucose electrooxidation on gold nanoparticles (AuNPs) as a model reaction.First, we performed conventional ensemble measurements using AuNPs coated highly oriented pyrolytic graphite (HOPG) electrodes and AuNPs coated ITO electrodes. Identical photocurrents (Figures A-B,F) were observed at wavelengths where the AuNPs plasmons are active (532 nm) and inactive (650 nm) in an electrolyte consisting of 100 mM NaOH and 30 mM glucose. Controlled experiments demonstrated that in ensemble measurements with working electrodes, where the plasmonic AuNPs are in direct contact with the conductive support, the underlying support material, such as HOPG, is the primary photo-absorber and responsible for the photocurrent. Near-identical photo-absorption of HOPG across the visible region causes consistent temperature increase at different wavelengths. This increased temperature at the electrode-electrolyte interface enhances the charge transfer kinetics and this gets reflected in the identical photocurrent at different wavelengths.2 In ensemble measurements, plasmonic effects have minimal impact on photocurrents. We suggest that this is due to continuous equilibration of the Fermi level (EF) of the AuNPs with the EF of the working electrode, leading to fast neutralisation of hot carriers by the measuring circuit (Figure G). Therefore, the hot carriers generated in plasmonic materials can not participate in catalysing chemical reactions.In SEE, a catalytically inactive carbon ultramicroelectrode (C-UME) is used as the working electrode and AuNPs diffused (~5 pM) in the electrolyte act as the catalyst. When the AuNPs collide with biased C-UME or are at close distances that enable charge tunnelling, electrocatalysis occurs on the AuNPs. This leads to formation of current spikes in the chronoamperograms. Contrary to ensemble measurements, different rate enhancements were detected at different wavelengths, with the charge/spike being higher under 532 nm illumination (1.230±0.058 fC) compared to dark (0.870±0.034 fC) and 650 nm illumination (0.920±0.036 fC) in an electrolyte consisting 10 mM NaOH and 30 mM glucose (Figures C-E,F). This wavelength dependence of photocurrent is in accordance with the absorption properties of AuNPs and therefore confirms that plasmonic effects are contributing to the photocurrents. We suggest that this is due to decoupling of the EF of the dispersed AuNPs and the C-UME. Within the charge transfer distance from the electrode or even at collision, EF level equilibration does not necessarily occur in SEE when the colliding particle does not stick to the electrode.3 The first possibility for current enhancement arises from the injection of hot carriers. When the AuNPs are not in direct contact with the electrode to enable rapid EF equilibration but at a distance sufficient for charge transfer, the hot electrons will be transferred to the C-UME due to the large difference in the energies of the electrode and hot electrons (Figure G). At the same time, the hot holes inside the AuNPs can not be neutralised by electron transfer from the electrode at the same rate as hot electrons are removed to the external circuit as the energies of the holes are either higher than that of the electrons at the electrode or only slightly lower depending on the exact value of EF of the AuNPs and the energy distribution of the hot holes.4 These remaining hot holes participate in charge transfer with glucose molecules. As the hot carrier generation in AuNPs is a wavelength-dependent phenomenon, the participation of hot charge carriers in the catalytic reaction is possible only under 532 nm but not under 650 nm irradiation.5 The second possibility is the facilitation of the catalytic reaction by thermal contribution due to the recombination of charge carriers. As the diffused AuNPs are exposed to laser irradiation, the hot carriers will recombine leading to lattice heating. When a 532 nm laser-irradiated AuNP comes into contact with the working electrode, thereby becoming active for the catalytic reaction, its temperature is already higher compared to the AuNPs in the dark or 650 nm illumination. The interfacial charge transfer will become faster on the heated AuNP leading to enhanced charge/nano-impact.References Chem. Soc. Rev. 2021, 50, 12070-12097 ACS Catal. 2022, 12, 4110–4118 J. Phys. Chem. Lett. 2017, 8, 3564–3575 ACS Nano 2019, 13, 3629–3637 Angew. Chem., Int. Ed. 2023, e202302394, DOI: 10.1002/anie.202302394 Figure 1

Resonant optical trapping of Janus nanoparticles in plasmonic nanoaperture

Controlled trapping of light-absorbing nanoparticles with low-power optical tweezers is crucial for remote manipulation of small objects. This study takes advantage of the synergetic effects of tightly confined local fields of plasmonic nanoaperture, self-induced back-action (SIBA) of nanoparticles, and resonant optical trapping method to demonstrate enhanced manipulation of Janus nanoparticles in metallic nanohole aperture. We theoretically demonstrate that displacement of Au-coated Janus nanoparticles toward plasmonic nanoaperture and proper orientation of the metal coating give rise to enhanced near-field intensity and pronounced optical force. We also explore the effect of resonant optical trapping by employing a dual-laser system, where an on-resonant green laser excites the metal-coated nanoparticle, whereas an off-resonant near-infrared laser plays trapping role. It is found that, at the optimum nanoparticle configuration, the resonant optical trapping technique can result in threefold enhancement of optical force, which is attributed to the excitation of surface plasmon resonance in Janus nanoparticles. The findings of this study might pave the way for low-power optical manipulation of light-absorbing nanoparticles with possible applications in nanorobotics and drug delivery.

An in-fiber sensor for simultaneous measurement of cholesterol concentration and temperature based on SPR and MMI

In this paper, we design an in-fiber two-parameter sensor with multimode fiber (MMF)-Au film coated hollow fiber (HCF)-MMF structure, which can simultaneously excite Surface Plasmon Resonance (SPR) effect and Multimode Interference (MMI) effect. A composite material of Au nanoparticles/β-cyclodextrin (AuNPs/β-CD) is deposited on the surface of the Au film coated HCF to realize highly-sensitive measurement of cholesterol concentration. Here, the AuNPs can not only enhance the measurement sensitivity of the SPR sensor, but also increase the numbers of combination sites of β-CD and cholesterol. Then, to solve the cross-sensitivity problem between temperature and cholesterol, the glycerin is selected as a temperature-sensitive material to fill into the inner channel of the HCF, making the MMI sensor sensitive to temperature, and finally realizing the simultaneous measurement of cholesterol concentration and temperature. The experimental results demonstrate that the wavelength shift of the SPR and the MMI are 12.7 nm and 7.9 nm, respectively, when the cholesterol concentration changes from 0 to 500 nM. The temperature sensitivity of the SPR and the MMI are −0.9 nm/°C and 2.64 nm/°C, respectively, in the temperature range of 30°C–46 °C. In addition, the sensor shows good recognition ability of cholesterol molecules in serum environment, with good stability, selectivity and repeatability, and has broad application prospects in the biomedical field.

{111}‐ Faceted Silver Nanoplates: An Automated and Customized Design for Functionality

AbstractSilver nanoparticles (Ag‐NPs) exhibit the highest efficiency of localized surface plasmon resonance (LSPR) excitation that can be tuned to any wave length in the visible spectrum. Its performance depends to a large extent on its physicochemical characteristics such as size and shape; which, in turn, can be modulated by the selective growth of their crystalline facets. We used a simple direct chemical reduction method with a precise manipulation of seed‐mediated growth control through an automated single‐phase continuous flow‐batch system to induce customized geometries on Ag‐NPs. Optimization of the experimental design was carried out from a multivariate analysis, where the height/width ratio of LSPR band was used as response signal. Proposed methodology controls the critical steps in the synthesis of Ag‐NPs that modulate their morphology to attain customized surface plasmon resonance in an interval of 380 nm (spherical‐shaped nanoparticles) to 925 nm ({111}‐ faceted prism‐shaped nanoplates) absorptions, leading to a versatile platform to extend their potential applications. Although the present work focused on silver nanoparticles, we believe that this methodology can be extended to any free‐electron metals.

Thickness measurement of bimetallic film using surface plasmon resonance holographic microscopy.

Bimetallic film with high stability and sensitivity is often used to excite surface plasmon resonance (SPR). The thicknesses of the bimetallic film play an important role in quantitative retrieval of the sample's parameters, and a precise measurement method is not available until now. In this paper, we propose a method for measuring the thicknesses of bimetallic film using surface plasmon resonance holographic microscopy (SPRHM). Considering that the refractive index of the dielectric upon the bimetallic film sensitively modulates the SPR phase response, the two thickness parameters of bimetallic film can be calculated by two phase-contrast SPR images with two different liquid dielectrics. The capability of this method was verified with several Ag-Au film couples by using a compact SPRHM setup. Our work provides a precise characterization method for the parameters of SPR configuration and may find wide applications in the research fields of SPR sensing and imaging.

Mass spectrometric monitoring of ligand-bridged hot electron transfer and anaerobic oxidization on auto renewable droplet-based plasmonic nanoreactors under visible light illumination

The light induced hot-electron on plasmonic nanostructures has been recognized as a breakthrough discovery for photovoltaic and photocatalytic applications. With mass spectrometry, we demonstrate the dynamics of hot electron transfers of anaerobic oxidization reactions on Au decorated TiO2 plasmonic nanoparticles, which were coated on the inner surface of a flask. Those nanoparticles were covered by continuously renewed liquid droplets of solvent and reactants that were transported through a Venturi jet mixer with auto-spray. In addition to intensive mass transfer in such droplet-based nanoreactors, as well as strong adsorption of reactants and rapid desorption of products on materials surfaces, the localized surface plasmon resonance (LSPR) excitation upon visible light illumination, by which accumulated energies of plasmons are transferred to electrons in the conduction band of the material, attributes to the efficient photocatalytic transformation. Mass spectrometric detection of intermediate radical anions and negative ions with stable isotope labeling unambiguously identifies that highly energetic hot electrons can escape from the plasmonic nanostructures, be collected by adsorbed molecules, and initiate bond cleavages. It was demonstrated that losses of two H atoms result in the anaerobic oxidization of each benzyl alcohol molecule to a benzyl aldehyde molecule in the absence of molecular oxygen with more than 90 % yields. The well recyclable plasmonic nanoreactors implicate the injection of transferred electrons eventually back to electronically depleted Au+ positive ions. Bridged by adsorbed molecules, electrons were repeatedly circulated back and forth in plasmonic nanoreactors, where the collected light was eventually converted into chemical energy.

A High-Sensitivity Fiber Biosensor Based on PVDF-Excited Surface Plasmon Resonance in the Terahertz Band

In this paper, a D-type photonic crystal fiber (PCF) with Zeonex material as the substrate and polyvinylidene fluoride (PVDF) material as the surface plasmon resonance (SPR) excitation layer is proposed for biosensing in the terahertz (THz) band. Analyzed with a finite element method, the proposed biosensor has shown excellent sensing properties for analyte refractive indices ranging from 1.32 to 1.45. With a maximum sensor resolution of 8.40 × 10−7 refractive index unit (RIU) and a figure of merit of 39.42 RIU−1, the maximum wavelength sensitivity and amplitude sensitivity can reach 335.00 μm/RIU and −66.01 RIU−1, respectively. A ±2% fabrication tolerance analysis is also performed on the biosensor to prove its practical feasibility. We conclude that our proposed PCF biosensor utilizing PVDF-excited SPR can provide high sensitivity, and thus a compact, label-free, and convenient solution for biomedical liquid sensing in the THz band.