Surface-mounted Permanent Magnet Motor Research Articles

Improved Complex Relative Permeance Model for Slotted Surface-Mounted Permanent Magnet Motor

Improved Complex Relative Permeance Model for Slotted Surface-Mounted Permanent Magnet Motor

Multiphysics performance of surrogate models on skewed pole surface-mounted permanent magnet motors

PurposeEvaluating the multiphysics performance of an electric motor can be a computationally intensive process, especially where several complex subsystems of the motor are coupled together. For example, evaluating acoustic noise requires the coupling of the electromagnetic, structural and acoustic models of the electric motor. Where skewed poles are considered in the design, the problem becomes a purely three-dimensional (3D) multiphysics problem, which could increase the computational burden astronomically. This study, therefore, aims to introduce surrogate models in the design process to reduce the computational cost associated with solving such 3D-coupled multiphysics problems.Design/methodology/approachThe procedure involves using the finite element (FE) method to generate a database of several skewed rotor pole surface-mounted permanent magnet synchronous motors and their corresponding electromagnetic, structural and acoustic performances. Then, a surrogate model is fitted to the data to generate mapping functions that could be used in place of the time-consuming FE simulations.FindingsIt was established that the surrogate models showed promising results in predicting the multiphysics performance of skewed pole surface-mounted permanent magnet motors. As such, such models could be used to handle the skewing aspects, which has always been a major design challenge due to the scarcity of simulation tools with stepwise skewing capability.Originality/valueThe main contribution involves the use of surrogate models to replace FE simulations during the design cycle of skewed pole surface-mounted permanent magnet motors without compromising the integrity of the electromagnetic, structural, and acoustic results of the motor.

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Hybrid Analytical Model for Predicting the Electromagnetic Losses in Surface-Mounted Permanent-Magnet Motors

Analytical Prediction of D- and Q-Axes Inductance for Dual Three-Phase Surface-Mounted Permanent Magnet Motor Accounting for Eccentric Pole and Tooth Saturation

This paper presents an analytical model to calculate the d- and q-axis Inductance of dual three-phase surface-mounted permanent magnet motor accounting for eccentric pole and tooth saturation. The novel method combines the advantages of the subdomain model and lumped parameter magnetic circuit model. This motor is divided into several subdomains. And the eccentric pole is further subdivided into multiple symmetrical regions. Based on the Poisson’s and Laplace’s equations, the subdomain model is established. The reluctance of the tooth and the tip is calculated by the subdomain model and lumped parameter magnetic circuit model. According to the relationship between the tooth reluctance, tip reluctance and the corresponding air-gap reluctance, the equivalent air-gap magnetic density coefficient is obtained. Based on the coefficient, the new air-gap magnetic density and tooth magnetic density are solved. For the solution of saturation, this paper compares the density of two adjacent solutions until the error between the two is very small. Based on the iterative calculation, the d- and q-axis inductance is obtained. The finite element method and experiment are employed to validate the analytical model.

Synthesis of Relative Permeance for Analysis and Design of Multislotted Surface-Mounted Permanent Magnet Motor

Synthesis of Relative Permeance for Analysis and Design of Multislotted Surface-Mounted Permanent Magnet Motor

Analytical calculation of magnetic field in surface-mounted permanent-magnet vernier motors

This paper proposes an analytical method to calculate the on-load magnetic field, Back electromotive force (BEMF) and torque of the surface-mounted permanent-magnet vernier machine (SMPMVM) accounting for slots, tooth-tips, flux modulation pole slots (FMPS) and the shape of magnet. The on-load magnetic field is predicted according to the surface-current method of permanent magnet, subdomain model and the superposition principle. BEMF and torque are calculated based on the magnetic field. The results show that THD of open-circuit and on-load radial flux density in the SMPMVM with concentric magnet poles is smaller than that in the conventional SMPMVM with eccentric magnet poles. 30th and 50th harmonic orders are obvious between two motors. Moreover, the peak cogging torque of the motor with concentric magnet poles is almost six times of the peak cogging torque of motor with eccentric magnet poles. The finite-element and experimental results confirm that the developed analytical method has high accuracy for predicting the magnetic field, BEMF, cogging torque and on-load electro-magnetic torque of SMPMVM with different shape of magnet.

Optimal Design of Surface-Mounted Permanent Magnet Motor with Multi-Level Magnet Combination Using Analytical Method

Optimal Design of Surface-Mounted Permanent Magnet Motor with Multi-Level Magnet Combination Using Analytical Method

Performance Improvement of Permanent-Magnet-Synchronous Motors through Rotor Shape Optimization of Marine Blowing System with High-Speed Rotation

Currently, research is being carried out on the performance improvement of permanent-magnet-synchronous motors (PMSM) used in air conditioning and blowing systems for marine, as well as structural research, regarding their high-speed operation. Surface-mounted permanent magnet (SPM) motors used in marine propulsion and air-conditioning systems have the advantages of easy rotor manufacturing and a simple structure. However, owing to the structural characteristics associated with attaching a permanent magnet to the surface of the rotor, there is a risk of permanent magnet scattering when turning a rated load at high speed, and the rotor assembly is directly affected by the heat generated in the stator winding. Therefore, in this study, additional protrusions were proposed to prevent rotor scattering during high-speed operations. Additionally, optimization was performed to reduce the torque ripple at the rated load and the total harmonic distortion (THD) of the no-load-induced electromotive-force waveform generated by the protrusion. Consequently, the risk of scattering at high speeds was improved by securing the bonding force of the permanent magnet using the proposed structure, and the THD and torque ripple were reduced compared with those of the basic model through optimization. In addition, rotor structural stress analyses were conducted to solve the problem of scattering at high speeds and eigenmode analysis.

A New Technique for the Subdomain Method in Predicting Electromagnetic Performance of Surface-Mounted Permanent Magnet Motors With Shaped Magnets and a Quasi-Regular Polygon Rotor Core

Surface-mounted permanent magnet (SPM) motors with shaped magnets and a quasi-regular polygon rotor core (QPRC) are challenging to analyze in terms of accuracy and speed because of the special structure. This article proposes a new technique for the subdomain method which can accurately predict the electromagnetic performance of this kind of motor. The proposed new technique deals with the shaped magnet based on the method of magnet symmetrical segmentation, and it can solve the magnetic field generated by a pair of symmetrical segments together at each time. Especially, for the QPRC, the idea of variable rotor core radius is used in the new technique to analyze different segments. Furthermore, the new technique adopts a periodic boundary condition, which can quickly predict the electromagnetic performance of the motor, such as air-gap flux density, cogging torque, no-load back-EMF, winding inductance, electromagnetic torque and unbalanced magnetic force (UMF). This proposed new technique is applied to a 12-pole/3-phase SPM motor with shaped magnets and a QPRC, and its correctness is verified by finite-element analysis and experiment. The new technique can analyze the motor accurately, and its calculation speed is two orders of magnitude faster than that of the finite-element method.

Analytical Calculation of Air Gap Magnetic Field of SPMSM with Eccentrically Cut Poles Based on Magnetic Pole Division

In the design process of surface-mounted permanent magnet motor (SPMSM) for industrial robots and computer numerical control (CNC) machine tools, to pursue the sinusoidal nature of the back electromotive force, the magnetic poles in the form of eccentric pole cutting structure are often used. To analyze the no-load air gap magnetic field of the SPMSM with eccentrically cut poles simply and accurately, a subdomain model magnetic field analytical calculation method based on equal-area integral block processing of permanent magnets is proposed. The problem that the traditional subdomain analysis model cannot be directly applied to the SPMSM with eccentrically cut poles of unequal thickness is solved. The proposed method considers the influence of stator slotting and the actual permeability of permanent magnets, and directly obtains the fundamental wave and harmonic components of the no-load air gap flux density by solving the subdomain model. The finite element method (FEM) is used to directly calculate the air gap magnetic field for verification. The results of the analytical method and the no-load air gap magnetic density calculated by the FEM are consistent, which verifies the accuracy of the proposed analytical method and can quickly guide the design of the SPMSM with eccentrically cut poles.

Magnetic Field Analysis of Surface-Mounted Permanent Magnet Motors Based on an Improved Conformal Mapping Method

In this article, an improved conformal mapping (ICM) method based on a complex potential function is proposed. It can improve the calculation speed and accuracy of magnetic fields for surface-mounted permanent magnet synchronous motors (SPMSMs). The eccentric-shaped poles are replaced by equivalent currents, and the improved conformal mapping method is adopted to transform an actual slotted motor air gap to an equivalent rectangular regular slotless air gap. The ICM method improves the speed of calculation because its number of mapping times is less than the traditional conformal mapping (TCM) method. By solving the complex potential generated by the equivalent current in the rectangular regular air-gap region, the air-gap magnetic field of the SPMSM under no-load, armature reaction and loaded conditions can be solved. Then, the no-load back-EMF and loaded torque performance under different load conditions are calculated. The accuracy of the ICM method is verified by finite-element simulation. In addition, the fast speed and high accuracy of the proposed ICM method incorporating the complex potential function for solving the air-gap magnetic field has been demonstrated in comparison to the TCM method with the Hague equation. An eccentric-shaped-pole permanent magnet motor prototype is also built and tested in experiment and the results agree with those calculated by the proposed ICM method.

Design of a High Torque Density Robot Joint and Analysis of Force Control Method Applied for a Light Exoskeleton

In many robotic applications, the joint is required to have a small volume, low weight and high torque output. In this paper, based on the finite element analysis (FEA), a 36-slot 40-pole outer rotor surface-mounted permanent magnet (OR-SPM) motor with concentrated winding is designed for the exoskeleton robot. The fractional slot concentrated winding (FSCW) is employed to reduce end winding height, leading better portability. Since the motor is relatively flat, the 3D end effect is critical to the electromagnetic performances. Special attention is paid to 3D end effect during the multi-objective optimization of the OR–SPM motor. In order to increase the ending torque output, the planetary reducer is located between OR–SPM motor and load, and then system level optimization covering motor and reducer is carried out to achieve best torque output. In addition, the force impendence control method with parameter self-adaptive capability is proposed to improve user experience of the exoskeleton robot, where the key parameters in the algorithm vary according to different actions of the exoskeleton. In addition, the inertia of load is calculated using the parameter identification based on least squares method. Finally, the prototype of the joint is fabricated and tested to validate the above FEA results and control method. The user experience of the exoskeleton robot is also covered.

Design of a Dual-Permanent-Magnet Vernier Machine to Replace Conventional Surface-Mounted Permanent Magnet Motor for Direct-Drive Industrial Turbine Application

Surface-mounted permanent magnet motors (SMPMMs) have been widely used in industrial fields. However, when it comes to direct-drive low-speed large-torque fields, SMPMMs have several problems, such as lower slot filling factor, complicated fabrication, low efficiency, and bulky size. Recently, dual-permanent-magnet Vernier motors (DPMVMs) have been investigated due to their high torque density for low-speed direct-drive applications. However, so far, there is little research that demonstrates the application of the DPMVM for real industrial fields and quantitatively compares the performances of the DPMVM and the SMPMM. This paper studies the application of a DPMVM to the direct-drive industrial turbine as a replacement for conventional SMPMM. Rectangular and trapezoidal PMs are first applied to DPMVM in this paper. The performances of the DPMVM are quantitively compared with two typical SMPMMs. One is the design that has the same stator slots as the DPMVM, while the other has the same rotor pole pairs as the DPMVM. Economic costs are considered to form a thorough comparison between DPMVM and SMPMMs. It is revealed that with rectangular and trapezoidal PMs adopted in the DPMVM, the cost of PMs is significantly reduced with little sacrifice of performance. The efficiency of DPMVM is around 12% higher, and the material cost is reduced by 6.87% compared with the SMPMM.

Parameter Sensitivity Analysis and Optimization of Electromagnetic Force Waves of Fractional Slot Surface-Mounted PM Motor With External Rotor

Parameter Sensitivity Analysis and Optimization of Electromagnetic Force Waves of Fractional Slot Surface-Mounted PM Motor With External Rotor

A Multi-Objective Finite-Element Method Optimization That Reduces Computation Resources Through Subdomain Model Assistance, for Surface-Mounted Permanent-Magnet Machines Used in Motion Systems

Surface-mounted permanent-magnet (PM) motors are widely used in motion control systems because of their high peak torque-to-inertia ratio. These motors exhibit high magnetic saturation to produce high peak torque. A precise finite-element model (FEM) is needed to optimize these motors. It requires high computation power, especially for multi-objective optimizations. On the contrary, subdomain models require low computing power but are inaccurate when magnetic saturation occurs. To solve this problem, we use a subdomain-assisted FEM optimization method (SAFEMOM) that combines subdomain models for preoptimization and FEM for refined optimization. We provide the quantitative measurement methods to compare SAFEMOM with FEM-only optimization. If the constraints in the magnetic fluxes in the subdomain part of SAFEMOM are based on the actual saturation value of the materials, then the advantage of SAFEMOM is not significant. The machines in this study use non-linear material with a knee point at 1.3 T and hence show heavy magnetic saturation above 1.5 T. In that case, contrary to what could be intuitively thought, we need to increase the magnetic flux density limit to 2.6 T - 3.0 T in SAFEMOM to have a significant advantage. SAFEMOM reduces about 80% of computing time to obtain a slightly better convergence than the one using FEM only. Also, if limited computing resource is allowed, SAFEMOM gives an error reduced by a factor of nearly eight compared to the optimization error using FEM only. Those results are validated on a family of surface-mounted permanent-magnet machines with a wide range of design parameters.

Analysis of Limiting Output Capacity of Low-Speed and High-Torque Surface-Mounted Permanent Magnet Motor Considering Resistance Voltage Drop

Analysis of Limiting Output Capacity of Low-Speed and High-Torque Surface-Mounted Permanent Magnet Motor Considering Resistance Voltage Drop

Rotor Design and Optimization of High-Speed Surface-Mounted Permanent Magnet Motor Based on the Multi-Physical Field Coupling Method

Rotor Design and Optimization of High-Speed Surface-Mounted Permanent Magnet Motor Based on the Multi-Physical Field Coupling Method

Rotor Stress Analysis of High-Speed Surface-Mounted Permanent Magnet Motors with Segmented Poles Considering Fillings

Rotor Stress Analysis of High-Speed Surface-Mounted Permanent Magnet Motors with Segmented Poles Considering Fillings

Convection Heat Transfer Coefficient Regression Models Construction for Fast High-Speed Motor Thermal Analysis

This article proposes a computationally efficient thermal study method that substitutes computational fluid dynamics (CFDs) with a finite-element analysis (FEA) involving minimal loss of accuracy and omission of the increased computational load. The suggested technique contributes toward the realization of multiphysics optimization of high-speed electrical machines that effectively includes critical thermal evacuation phenomena. The strategy is regression-based and succeeds in constructing convection coefficient regression models that typically involve many variables and small training datasets. The proposed scheme is verified in high-loss density and high-speed outer rotor surface-mounted permanent magnet (SMPM) motor geometries that an optimization algorithm typically encounters during execution. The reference target specifications correspond to 20 kW output power, 15k r/min rotating speed, and 2 kHz electrical frequency.

Optimal design of hybrid consequent-pole permanent magnet motor to reduce torque ripple

Compared with the surface-mounted permanent magnet (SPM) motors, the consequent-pole permanent magnet (CPM) motors can obtain the approximate output torque on the basis of saving 30% PM material. However, due to the special arrangement of the CPM motor, its torque ripple is large, which will affect the smooth operation of this kind of motor. Therefore, this paper proposes a hybrid consequent-pole permanent magnet (HCPM) motor with an auxiliary PM on one side of the iron pole, which can reduce the torque ripple and ensure smooth operation effectively. In order to make the performances of proposed motor better, the Taguchi method is used to optimize the proposed HCPM motor. Furthermore, the influence rule and the relative importance of each optimization variable on the optimization goal are obtained by the average value analysis and the variance analysis, respectively. According to the above analysis results, the optimized hybrid consequent-pole permanent magnet (OHCPM) motor is obtained. Finally, the performances of SPM motor, CPM motor, and OHCPM motor are compared to verify the validity of the proposed structure.