Surface Chemistry Of Quantum Dots Research Articles

Assessing the Steric Impact of Surface Ligands on the Proteolytic Turnover of Quantum Dot-Peptide Conjugates.

Proteases are important biomarkers and targets for the diagnosis and treatment of disease. The advantageous properties of semiconductor quantum dots (QDs) have made these nanoparticles useful as probes for protease activity; however, the effects of QD surface chemistry on protease activity are not yet fully understood. Here, we present a systematic study of the impact of sterics on the proteolysis of QD-peptide conjugates. The study utilized eight proteases (chymotrypsin, trypsin, endoproteinase Lys C, papain, endoproteinase Arg C, thrombin, factor Xa, and plasmin) and 41 distinct surface chemistries. The latter included three molecular weights of each of three macromolecular ligands derived from dextran and polyethylene glycol, as well as anionic and zwitterionic small-molecule ligands, and an array of mixed coatings of macromolecular and small-molecule ligands. These surface chemistries spanned a diversity of thicknesses, densities, and packing organization, as characterized by gel electrophoresis, capillary electrophoresis, dynamic light scattering, and infrared spectroscopy. The macromolecular ligands decreased the adsorption of proteases on the QDs and decelerated proteolysis of the QD-peptide conjugates via steric hindrance. The properties of the QD surface chemistry, rather than the protease properties, were the main factor in determining the magnitude of deceleration. The broad scope of this study provides insights into the many ways in which QD surface chemistry affects protease activity, and will inform the development of optimized nanoparticle-peptide conjugates for sensing of protease activity and resistance to unwanted proteolysis.

Carbon quantum dots surface chemistry: Evaluation of Photo and Cytotoxic activity

Carbon quantum dots (CQDs) have exceptional physical-chemical properties that make them suitable for a wide range of uses, such as the photocatalytic removal of organic contaminants from water. Here, we provide a one-step, ecologically friendly, and economical method for creating iron/nitrogen co-doped (Fe/N-CQD) and nitrogen-doped (N-CQD) quantum dot nanomaterials. The characteristics of the developed nanomaterials were investigated with regard to how surface chemistry impacts their capacity for adsorption and photoactivity in a case study of a specific water pollutant reduction. The influence of the two irradiation sources-operating in the UV and visible ranges-on the photoactivity of materials was highlighted. Finally, their eco-friendliness was examined on four different human tumor cell lines.

CdS Quantum Dots for Metallaphotoredox-Enabled Cross-Electrophile Coupling of Aryl Halides with Alkyl Halides.

Semiconductor quantum dots (QDs) offer many advantages as photocatalysts for synthetic photoredox catalysis, but no reports have explored the use of QDs with nickel catalysts for C-C bond formation. We show here that 5.7 nm CdS QDs are robust photocatalysts for photoredox-promoted cross-electrophile coupling (40 000 TON). These conditions can be utilized on small scale (96-well plate) or adapted to flow. NMR studies show that triethanolamine (TEOA) capped QDs are the active catalyst and that TEOA can displace native phosphonate and carboxylate ligands, demonstrating the importance of QD surface chemistry.

Mixed Small-Molecule Matrices Improve Nanoparticle Dispersibility in Organic Semiconductor-Nanoparticle Films

Controlling the dispersibility of nanocrystalline inorganic quantum dots (QDs) within organic semiconductor (OSC):QD nanocomposite films is critical for a wide range of optoelectronic devices. This work demonstrates how small changes to the OSC host molecule can have a dramatic detrimental effect on QD dispersibility within the host organic semiconductor matrix as quantified by grazing incidence X-ray scattering. It is commonplace to modify QD surface chemistry to enhance QD dispersibility within an OSC host. Here, an alternative route toward optimizing QD dispersibilities is demonstrated, which dramatically improves QD dispersibilities through blending two different OSCs to form a fully mixed OSC matrix phase.

Nanoscale 3D spatial addressing and valence control of quantum dots using wireframe DNA origami

Control over the copy number and nanoscale positioning of quantum dots (QDs) is critical to their application to functional nanomaterials design. However, the multiple non-specific binding sites intrinsic to the surface of QDs have prevented their fabrication into multi-QD assemblies with programmed spatial positions. To overcome this challenge, we developed a general synthetic framework to selectively attach spatially addressable QDs on 3D wireframe DNA origami scaffolds using interfacial control of the QD surface. Using optical spectroscopy and molecular dynamics simulation, we investigated the fabrication of monovalent QDs of different sizes using chimeric single-stranded DNA to control QD surface chemistry. By understanding the relationship between chimeric single-stranded DNA length and QD size, we integrated single QDs into wireframe DNA origami objects and visualized the resulting QD-DNA assemblies using electron microscopy. Using these advances, we demonstrated the ability to program arbitrary 3D spatial relationships between QDs and dyes on DNA origami objects by fabricating energy-transfer circuits and colloidal molecules. Our design and fabrication approach enables the geometric control and spatial addressing of QDs together with the integration of other materials including dyes to fabricate hybrid materials for functional nanoscale photonic devices.

Thermodynamic Investigation of Increased Luminescence in Indium Phosphide Quantum Dots by Treatment with Metal Halide Salts.

Increasing the quantum yields of InP quantum dots is important for their applications, particularly for use in consumer displays. While several methods exist to improve quantum yield, the addition of inorganic metal halide salts has proven promising. To further investigate this phenomenon, InP quantum dots dispersed in tetrahydrofuran were titrated with ZnCl2, ZnBr2, and InCl3. The optical properties were observed, and the reactions were studied by using quantitative 1H NMR and thermodynamic measurements from isothermal titration calorimetry. These measurements contradict the previously hypothesized reaction mechanism in which metal halide salts, acting as Z-type ligands, passivate undercoordinated anions on the surface of the quantum dots. This work provides evidence for a newly proposed mechanism wherein the metal halide salts undergo a ligand exchange with indium myristate. Thermodynamic measurements prove key to supporting this new mechanism, particularly in describing the organic ligand interactions on the surface. An Ising model was used to simulate the quantum dot surface and was fit by using thermodynamic and 1H NMR data. Together, these data and the proposed exchange mechanism provide greater insight into the surface chemistry of quantum dots.

Coupling effects in QD dimers at sub-nanometer interparticle distance

Currently, intensive research efforts focus on the fabrication of meso-structures of assembled colloidal quantum dots (QDs) with original optical and electronic properties. Such collective features originate from the QDs coupling, depending on the number of connected units and their distance. However, the development of general methodologies to assemble colloidal QD with precise stoichiometry and particle-particle spacing remains a key challenge. Here, we demonstrate that dimers of CdSe QDs, stable in solution, can be obtained by engineering QD surface chemistry, reducing the surface steric hindrance and favoring the link between two QDs. The connection is made by using alkyl dithiols as bifunctional linkers and different chain lengths are used to tune the interparticle distance from few nm down to 0.5 nm. The spectroscopic investigation highlights that coupling phenomena between the QDs in dimers are strongly dependent on the interparticle distance and QD size, ultimately affecting the exciton dissociation efficiency.

Effects of interfacial ligand type on hybrid P3HT:CdSe quantum dot solar cell device parameters

A series of CdSe quantum dot acceptors possessing six different ligand frameworks (i.e., pivalic acid, pyridine, butylamine, tert-butylthiol, thiophenol, and tetrahydrothiophene) were used as platforms for investigating the influence of quantum dot surface chemistry on the performance of hybrid poly(3-hexythiophene-2,5-diyl) (P3HT):CdSe quantum dot bulk heterojunction (BHJ) solar cells. We confirm that the device parameters used to evaluate solar cell performance are significantly influenced by the nature of the quantum dot surface ligand. The dependence of short circuit current density (JSC) on the CdSe ligand type was probed using ultrafast time-resolved photoluminescence (PL) measurements, and good correlations between the ligand-dependent trends in JSC and excited state lifetime were found, in which the P3HT:CdSe quantum dot BHJs with the shortest PL lifetimes possess the largest device current densities. The frontier energy levels of the quantum dot acceptors are significantly influenced by surface ligands, wherein the device open circuit potentials (VOC) were found to linearly correlate with the energy difference (ΔEDA) between the HOMO of the P3HT donor and the electrochemically determined LUMO of the CdSe quantum dot acceptors over a range of 220 mV. This work demonstrates the versatility of quantum dot ligand engineering for tuning the device parameters and performance of hybrid solar cells.

State-of-the-Art and Trends in Synthesis, Properties, and Application of Quantum Dots-Based Nanomaterials.

Quantum dots (QDs) with a nanoscale size range have attracted significant attention in various areas of nanotechnology due to their unique properties. Different strategies for the synthesis of QD nanoparticles are reported in which various factors, such as size, impurities, shape, and crystallinity, affect the QDs fundamental properties. Consequently, to obtain QDs with appropriate physical properties, it is required to select a synthesis method which allows enough control over the surface chemistry of QDs through fine-tuning of the synthesis parameters. Moreover, QDs nanocrystals are recently used in multidisciplinary research integrated with biological interfaces. The state-of-the-art methods for synthesizing QDs and bioconjugation strategies to provide insight into various applications of these nanomaterials are discussed herein.

Facile Synthesis of Cu–In–S/ZnS Core/Shell Quantum Dots in 1-Dodecanethiol for Efficient Light-Emitting Diodes with an External Quantum Efficiency of 7.8%

CuInS2 quantum dots (QDs) are promising alternatives for user- and environment-friendly light-emitting diode (LED) applications, but the capping of electrically insulating ligands on QDs limits the device charge injection efficiency and results in poor LED performance. To solve the problem, in this work, we demonstrate the facile synthesis of Cu–In–S/ZnS (CIS/ZnS) core/shell QDs employing 1-dodecanethiol (DT) as the single ligand. The capping of QDs solely by DT not only enhances the colloidal stability of the QD ink by avoiding proton transfer between different kinds of ligands but also improves the electrical property of the QD films. By controlling the molar feed ratio of cations, the photoluminescence emission peak of the CIS/ZnS QDs is tunable from 530 to 710 nm. Because the QD surface chemistry is optimized, it becomes facile to perform QD surface modification for LED application. A QD LED prototype is fabricated using CIS/ZnS QDs as the emissive layer, which exhibits a maximum luminance of 4490 cd ...

Targeted Ligand-Exchange Chemistry on Cesium Lead Halide Perovskite Quantum Dots for High-Efficiency Photovoltaics.

The ability to manipulate quantum dot (QD) surfaces is foundational to their technological deployment. Surface manipulation of metal halide perovskite (MHP) QDs has proven particularly challenging in comparison to that of more established inorganic materials due to dynamic surface species and low material formation energy; most conventional methods of chemical manipulation targeted at the MHP QD surface will result in transformation or dissolution of the MHP crystal. In previous work, we have demonstrated record-efficiency QD solar cells (QDSCs) based on ligand-exchange procedures that electronically couple MHP QDs yet maintain their nanocrystalline size, which stabilizes the corner-sharing structure of the constituent PbI64- octahedra with optoelectronic properties optimal for solar energy conversion. In this work, we employ a variety of spectroscopic techniques to develop a molecular-level understanding of the MHP QD surface chemistry in this system. We individually target both the anionic (oleate) and cationic (oleylammonium) ligands. We find that atmospheric moisture aids the process by hydrolysis of methyl acetate to generate acetic acid and methanol. Acetic acid then replaces native oleate ligands to yield QD surface-bound acetate and free oleic acid. The native oleylammonium ligands remain throughout this film deposition process and are exchanged during a final treatment step employing smaller cations-namely, formamidinium. This final treatment has a narrow processing window; initial treatment at this stage leads to a more strongly coupled QD regime followed by transformation into a bulk MHP film after longer treatment. These insights provide chemical understanding to the deposition of high-quality, electronically coupled MHP QD films that maintain both quantum confinement and their crystalline phase and attain high photovoltaic performance.

Stabilities Related to Near-Infrared Quantum Dot-Based Solar Cells: The Role of Surface Engineering

As compared to the great effort made on improving the power conversion efficiency of quantum dot (QD) solar cells, investigations on relevant stability, regarded as another crucial factor for their widespread implementation, are still limited. In this perspective, we discuss the stability of QD solar cells from different aspects, all highly relying on the surface chemistry of QDs. Specifically, three types of stabilities, closely relevant to the realization of the actual application of QD solar cells, are presented: (i) air-processability, which allows QDs to be processed in air with high batch-to-batch reproducibility; (ii) long-term stability of QD solar cells, directly related to their performance degradation in the long run; and (iii) QD ink stability that is concerned with the storage lifetime of QDs in solution and is compatible with low-cost solution processing techniques. Both air processability and excellent QD ink stability are critical for achieving the desired low-cost, large-scale roll-to-tol...

Tuning colloidal quantum dot band edge positions through solution-phase surface chemistry modification

Band edge positions of semiconductors determine their functionality in many optoelectronic applications such as photovoltaics, photoelectrochemical cells and light emitting diodes. Here we show that band edge positions of lead sulfide (PbS) colloidal semiconductor nanocrystals, specifically quantum dots (QDs), can be tuned over 2.0 eV through surface chemistry modification. We achieved this remarkable control through the development of simple, robust and scalable solution-phase ligand exchange methods, which completely replace native ligands with functionalized cinnamate ligands, allowing for well-defined, highly tunable chemical systems. By combining experiments and ab initio simulations, we establish clear relationships between QD surface chemistry and the band edge positions of ligand/QD hybrid systems. We find that in addition to ligand dipole, inter-QD ligand shell inter-digitization contributes to the band edge shifts. We expect that our established relationships and principles can help guide future optimization of functional organic/inorganic hybrid nanostructures for diverse optoelectronic applications.

Why Surface Chemistry Matters for QD–QD Resonance Energy Transfer

Resonance energy transfer (RET) has been shown to occur in films of semiconductor quantum dots (QDs) with variation in QD composition and size. When coupled with charge carrier transfer, RET could provide a complementary strategy for light harvesting in QD based solid state photovoltaic devices. Due to a direct dependence on the optical properties of the donor and acceptor, QD surface chemistry plays a drastic role in determining the efficiency of RET. Here, the impact of QD surface chemistry on RET in QD films was investigated using a pair of different sized CdSe QDs spin-cast onto a glass substrate. The effects of QD surface passivation on RET were studied by removing surface ligands through QD washing and adding an insulating ZnS shell. In addition, QD films were subjected to solid state ligand exchanges with thiolated ligands in order to mimic a layer-by-layer deposition method commonly used in the construction of QD photovoltaics. These solid state ligand exchanges exhibit drastic quenching of RET in...

Analysis of temporal evolution of quantum dot surface chemistry by surface-enhanced Raman scattering.

Temporal evolution of surface chemistry during oxidation of silicon quantum dot (Si-QD) surfaces were probed using surface-enhanced Raman scattering (SERS). A monolayer of hydrogen and chlorine terminated plasma-synthesized Si-QDs were spin-coated on silver oxide thin films. A clearly enhanced signal of surface modes, including Si-Clx and Si-Hx modes were observed from as-synthesized Si-QDs as a result of the plasmonic enhancement of the Raman signal at Si-QD/silver oxide interface. Upon oxidation, a gradual decrease of Si-Clx and Si-Hx modes, and an emergence of Si-Ox and Si-O-Hx modes have been observed. In addition, first, second and third transverse optical modes of Si-QDs were also observed in the SERS spectra, revealing information on the crystalline morphology of Si-QDs. An absence of any of the abovementioned spectral features, but only the first transverse optical mode of Si-QDs from thick Si-QD films validated that the spectral features observed from Si-QDs on silver oxide thin films are originated from the SERS effect. These results indicate that real-time SERS is a powerful diagnostic tool and a novel approach to probe the dynamic surface/interface chemistry of quantum dots, especially when they involve in oxidative, catalytic, and electrochemical surface/interface reactions.

Dual-mode crystal-bound and X-type passivation of quantum dots.

In this report, we present a new path to the control of quantum dot surface chemistry that can lead to a better understanding of nanoscale interfaces and the development of improved photocatalysts. Control of the synthetic methodology leads to QDs that are concomitantly ligated by crystal-bound organics at the surface anion sites and small X-type ligands on the surface cation sites.

Effects of Ligands on Charge Generation and Recombination in Hybrid Polymer/Quantum Dot Solar Cells

Control of quantum dot surface chemistry offers a direct approach to tune the molecular interface between donor and acceptor constituents in hybrid bulk heterojunction photovoltaics incorporating organic semiconductors and colloidal quantum dots. We investigate the effects of altering the quantum dot surface chemistry via ligand exchange in blends of PbS quantum dots with the conjugated polymer poly((4,8-bis(octyloxy)benzo(1,2-b:4,5-b′)dithiophene-2,6-diyl)(2-((dodecyloxy)carbonyl)thieno(3,4-b)thiophenediyl)) (PTB1). We study organic ligands with both thiol and carboxylic acid functional groups including 1,2-ethanedithiol (EDT), 3-mercaptopropionic acid (MPA), and malonic acid (MA), in addition to inorganic halide ions such as tetrabutylammonium iodide (TBAI). We show that the different ligand treatments influence hybrid solar cell efficiency primarily through changes in open-circuit voltage (VOC) and fill factor (FF). We use photoinduced absorption (PIA) spectroscopy to probe the generation of long-lived...

Genotoxic capacity of Cd/Se semiconductor quantum dots with differing surface chemistries.

Quantum dots (QD) have unique electronic and optical properties promoting biotechnological advances. However, our understanding of the toxicological structure–activity relationships remains limited. This study aimed to determine the biological impact of varying nanomaterial surface chemistry by assessing the interaction of QD with either a negative (carboxyl), neutral (hexadecylamine; HDA) or positive (amine) polymer coating with human lymphoblastoid TK6 cells. Following QD physico-chemical characterisation, cellular uptake was quantified by optical and electron microscopy. Cytotoxicity was evaluated and genotoxicity was characterised using the micronucleus assay (gross chromosomal damage) and the HPRT forward mutation assay (point mutagenicity). Cellular damage mechanisms were also explored, focusing on oxidative stress and mitochondrial damage. Cell uptake, cytotoxicity and genotoxicity were found to be dependent on QD surface chemistry. Carboxyl-QD demonstrated the smallest agglomerate size and greatest cellular uptake, which correlated with a dose dependent increase in cytotoxicity and genotoxicity. Amine-QD induced minimal cellular damage, while HDA-QD promoted substantial induction of cell death and genotoxicity. However, HDA-QD were not internalised by the cells and the damage they caused was most likely due to free cadmium release caused by QD dissolution. Oxidative stress and induced mitochondrial reactive oxygen species were only partially associated with cytotoxicity and genotoxicity induced by the QD, hence were not the only mechanisms of importance. Colloidal stability, nanoparticle (NP) surface chemistry, cellular uptake levels and the intrinsic characteristics of the NPs are therefore critical parameters impacting genotoxicity induced by QD.

Manipulating the Surface Chemistry of Quantum Dots for Sensitive Ratiometric Fluorescence Detection of Sulfur Dioxide.

Herein, we report a novel approach to the rapid visual detection of gaseous sulfur dioxide (SO2) by manipulating the surface chemistry of 3-aminopropyltriethoxysilane (APTS)-modified quantum dots (QDs) using fluorescent coumarin-3-carboxylic acid (CCA) for specific reaction with SO2. The CCA molecules are attached to the surface amino groups of the QDs through electrostatic attraction, thus the fluorescence of CCA is greatly suppressed because of the formation of an ion-pair complex between the ATPS-modified QDs and CCA. Such an interaction is vulnerable to SO2 because SO2 can readily react with surface amino groups to form strong charge-transfer complexes and subsequently release the strongly fluorescent CCA molecules. The mechanism has been carefully verified through a series of control experiments. Upon exposure to different amounts of SO2, the fluorescent color of the nanoparticle-based sensor displays continuously changes from red to blue. Most importantly, the approach owns high selectivity for SO2 and a tolerance of interference, which enables the sensor to detect SO2 in a practical application. Using this fluorescence-based sensing method, we have achieved a visual detection limit of 6 ppb for gaseous SO2.

Surface Effects on Photoluminescence and Optical Nonlinearity of CdS Quantum Dots Stabilized by Sulfonated Polystyrene in Water

A simple aqueous method has been used for the direct synthesis of water-soluble sulfonated polystyrene (SPS) encapsulated CdS quantum dots (QDs). The aqueous solution of the QDs, stabilized by two SPSs of different sulfonation level, shows a blue shift in ultraviolet–visible (UV–vis) absorption and band edge emission. High resolution transmission electron microscope (HR-TEM) establishes the presence of quantum confined CdS particles. The sulfonation level of SPS influences the size of QDs and strongly affects the photoluminescence (PL). The CdS QDs passivated by SPS with less sulfonation level exhibit only band edge emission (463 nm), while QDs in aqueous solution of SPS with high sulfonic acid content emits predominantly defect state emission (610 nm) against the band edge emission (463 nm). The PL of the SPS-CdS nanocomposites demonstrates an interesting variation in emission spectra and quantum yield via the change in sulfonation level, the change in pH and on keeping in aqueous solution. In addition, the z-scan measurements show negative nonlinear refraction coefficient, indicating self-defocusing phenomena. The absolute value of the third order nonlinear refractive index and nonlinear absorption are decided by the CdS QDs surface chemistry.