Surface Chemistry Of Nanocrystals Research Articles

Unraveling the Facet-Dependent Surface Chemistry at Molecular Scale: Photoassisted Oxidation of InP Nanocrystals.

The facet-dependent surface chemistry of nanocrystals (NCs) provides fundamental insights into chemical reactivities, which are critical for obtaining precise control over the NC surface. In this study, by obtaining InP NCs with well-defined {111} and {110}/{-1-1-1} facets (tetrahedrons and tetrapods, respectively) capped with chloride-oleylamine ligands, the previously underinvestigated facet-dependent surface chemistry of III-V materials is explored. Solid-state and solution NMR analyses show that InP tetrahedrons, with their smaller surface heterogeneity (single facet composition and lesser edge/vertex contribution) and stronger Lewis acidity, exhibit narrow 31P and 115In resonances as well as deshielded 13C signals of α-carbon adjacent to the NH2 group of oleylamine. As a result, InP tetrahedra exhibit strong ligand binding and a notable presence of less-mobile oleylamine ligands on the surface, leading to the blocking of access to external species. This is also consistent with the minimal blue shift of the first excitonic peak in absorption spectra and the strong resistance to photoassisted surface oxidation of InP tetrahedrons. Our findings, supported by solid-state/solution NMR, FT-IR, and XPS analyses, highlight the significance of facet-dependent reactivities to surface ligands and, thus, atmospheric moieties, enhancing the potential of III-V NCs in various optoelectronic applications.

Deciphering Surface Ligand Density of Colloidal Semiconductor Nanocrystals: Shape Matters.

Surface chemistry of colloidal semiconductor nanocrystals (NCs) is of paramount importance because it profoundly impacts their physical and chemical properties, processing, and performance. Herein, we report the effect of the shape of ZnS NCs in terms of nanodots, nanorods, and nanoplatelets (NPL) on the surface ligand density (LD) of the commonly used oleylamine (OLA) ligand by combining three experimental quantification techniques (e.g., thermogravimetric analysis-differential scanning calorimetry, 1H nuclear magnetic resonance spectroscopy, and inductively coupled plasma-optical emission spectrometry) with the semiempirical molecular dynamics (MD) simulations. Consistent results on the surface LD derived by the aforementioned three independent techniques were obtained, presenting an ascending order of LDdots < LDrods < LDNPLs. MD simulations reveal that the highest LD for ZnS NPLs can be attributed to their extremely flat and uniform surfaces with regular distribution of surface Zn atoms for the OLA molecules to achieve parallel and tight stacking, while for ZnS nanodots and nanorods, their surfaces may have staggered arrangement and multisteps, making it unlikely for the OLA ligand to adopt the tight ligand stacking mode. The finding revealed in this work not only sheds light on the constitution of the molecule ligand shell of NCs, which is helpful for their rational morphology control, but also provides an additional and important knob for tuning their chemical functionality.

Metal-Solvent Complex Formation at the Surface of InP Colloidal Quantum Dots.

The surface chemistry of colloidal semiconductor nanocrystals (QDs) profoundly influences their physical and chemical attributes. The insulating organic shell ensuring colloidal stability impedes charge transfer, thus limiting optoelectronic applications. Exchanging these ligands with shorter inorganic ones enhances charge mobility and stability, which is pivotal for using these materials as active layers for LEDs, photodetectors, and transistors. Among those, InP QDs also serve as a model for surface chemistry investigations. This study focuses on group III metal salts as inorganic ligands for InP QDs. We explored the ligand exchange mechanism when metal halide, nitrate, and perchlorate salts of group III (Al, In Ga), common Lewis acids, are used as ligands for the conductive inks. Moreover, we compared the exchange mechanism for two starting model systems: InP QDs capped with myristate and oleylamine as X- and L-type native organic ligands, respectively. We found that all metal halide, nitrate, and perchlorate salts dissolved in polar solvents (such as n-methylformamide, dimethylformamide, dimethyl sulfoxide, H2O) with various polarity formed metal-solvent complex cations [M(Solvent)6]3+ (e.g., [Al(MFA)6]3+, [Ga(MFA)6]3+, [In(MFA)6]3+), which passivated the surface of InP QDs after the removal of the initial organic ligand. All metal halide capped InP/[M(Solvent)6]3+ QDs show excellent colloidal stability in polar solvents with high dielectric constant even after 6 months in concentrations up to 74 mg/mL. Our findings demonstrate the dominance of dissociation-complexation mechanisms in polar solvents, ensuring colloidal stability. This comprehensive understanding of InP QD surface chemistry paves the way for exploring more complex QD systems such as InAs and InSb QDs.

Surface Adsorption and Photoinduced Degradation: A Study of Spinel Ferrite Nanomaterials for Removal of a Model Organic Pollutant from Water.

Spinel oxide nanocrystals are attractive materials for photoinduced advanced oxidation processes that degrade organic pollutants in water due to their chemical stability and tunability, visible light absorption, and magnetic recoverability. However, a systematic understanding of the structural and chemical factors that control the reactivity of specific spinel oxide nanocrystal materials toward photoinduced degradation processes is lacking. This Perspective illustrates these knowledge gaps through an investigation into the impacts of surface chemistry and composition of spinel ferrite nanocrystals of formula MFe2O4 (M = Mg, Fe, Co, Ni, Cu, Zn) on their ability to remove a model organic pollutant (methyl orange (MO)) from water. We identify two mechanisms by which the nanocrystals remove MO from water: (i) surface adsorption and (ii) photoinduced degradation under visible light irradiation in the presence of hydrogen peroxide via the photo-Fenton reaction. Nanocrystals that do not contain any surface ligands are more effective at removing MO from water than nanocrystals that contain surface ligands, despite our observation that the ligand-less nanocrystals do not form stable colloidal dispersions in water, while ligand-coated nanocrystals are colloidally stable. For many of the spinel ferrite compositions studied here, the fraction of methyl orange removal via adsorption to the nanocrystal surface in the absence of photoexcitation is larger than the fraction removed under irradiation. Our data indicate that the composition-dependent surface charge of the nanocrystals controls the degree of surface adsorption of the charged MO molecule. Overall, these results demonstrate that careful consideration of the impacts of surface chemistry on the behavior of spinel ferrite nanocrystals is required to accurately assess and subsequently understand their activity toward the photoinduced degradation of organic molecules.

Energy deposition in liquid scintillators composed of CsPbBr3 colloidal nanocrystal dispersions.

Liquid scintillation processes are commonly used for various applications involving radioactivity levels analysis, as well as experiments in the field of high energy physics, most commonly in the form of organic scintillating cocktails. In this paper, we explore the potential of halide perovskite nanocrystal colloidal dispersions as an alternative to those organic mixtures. After an optimization of the nanocrystals' mean size and surface chemistry, the scintillation yield of these composite mixtures is evaluated through Compton - Triple to Double Coincidence Ratio experiments and compared with commercial liquid scintillator. The obtained results shine a light on the energy deposition mechanisms in nanocrystals-based liquid scintillators.

Influence of cellulose nanocrystal surface chemistry and dispersion quality on latex nanocomposite stability, film formation and adhesive properties

The different surface functional groups on carboxylated and sulfated cellulose nanocrystals (CNCs) affect the latex CNC–polymer interactions.

Semiconductor Nanocrystals: Unveiling the Chemistry behind Different Facets.

ConspectusDeveloping next-generation colloidal semiconductor nanocrystals with high-quality optoelectronic properties and precise processability relies on achieving complete mastery over the surface characteristics of nanocrystals (NCs). This requires precise engineering of the ligand-NC surface interactions, which poses a challenge due to the complex reactivity of the multiple binding sites across the entire surface. Accordingly, recent progress has been made by strategically combining well-defined surface models with quantitative surface reactions to advance our understanding and manipulation of NC surface chemistry. Our lab has contributed to this progress by developing a size-dependent shape model of IV-VI NCs, gaining insights into their unique facet-specific chemistry, and developing a systematic ligand modification strategy for target applications. Furthermore, we have created well-defined facets in III-V NCs via a co-passivation strategy, addressing the previously lacking specific shapes.This Account is divided into three parts. First, we discuss the complexities involved in comprehensively understanding the nanocrystal surface structure at the atomistic level. We explain why we focused on well-defined NCs with a large exciton Bohr radius to explore facets, an essential aspect of surface heterogeneity across the entire NC. Second, we present our work on one of the most studied nanocrystals, IV-VI materials, and how facet-specific surface chemistry has led to a meaningful understanding and control of the NC's surface. We discovered a size-dependent facet distribution in IV-VI NCs and suggested facet-specific surface chemistry to improve the photophysical properties of NCs. We further modulate the electronic properties of NC assemblies for efficient optoelectronic applications. Third, we describe our recent success in achieving well-defined facets and their facet-specific chemistry in III-V NCs, which have yet to be explored as much as classical II-VI or IV-VI materials. We explain how controlling the surfaces in III-V NCs has been challenging. We present a precise growth platform for the geometric modulation of NCs, which can be further explored for shape-dependent exciton behavior and surface reactivities.Taken together, we present a compelling case for utilizing facet-specific chemistry as a platform for mechanistic investigation and morphology exploration, which can pave the way for developing high-quality and precisely designed NCs for optoelectronic technologies, unlocking new multidisciplinary applications.

Surface Chemistry of Lead Halide Perovskite Colloidal Nanocrystals.

ConspectusThe surface chemistry of lead halide perovskite nanocrystals (NCs) plays a major role in dictating their colloidal and structural stability as well as governing their optical properties. A deep understanding of the nature of the ligand shell, ligand-NC, and ligand-solvent interactions is therefore of utmost importance. Our recent studies have revealed that such knowledge can be harnessed following a multidisciplinary approach comprising chemical, structural, and spectroscopic analyses coupled with atomistic modeling. We show that specific surface terminations can be produced only by employing flexible and versatile syntheses that enable to work under desired conditions. In this Account, we first describe our studies aimed at synthesizing CsPbBr3 NCs with various surface terminations. These include CsPbBr3 NCs prepared under Br- and oleylamine-rich conditions, which feature a ligand shell composed of alkylammonium-Br species and a photoluminescence quantum yield (PLQY) of ∼90%. On the other hand, taking advantage of the inability of secondary amines to bind to the perovskite NCs surface, we could prepare cuboidal CsPbBr3 NCs bearing a Cs-oleate surface termination and a PLQY of 70% by employing oleic acid and secondary alkylamines. In the quest to identify ligands that can bind more strongly than oleates or primary alkylammonium ions to the surface of NCs already in the synthesis step, we used phosphonic acids as the sole ligands in the CsPbBr3 NCs synthesis, which yielded NCs with a truncated octahedron shape, high PLQY (∼100%), and a PbBr2-terminated surface passivated by hydrogen phosphonates and phosphonic acid anhydride. The surface chemistry and the stability of perovskite NCs were investigated via ad-hoc postsynthesis treatments. We found, for example, that reacting oleylammonium-Br-terminated NCs with stoichiometric amounts of neutral primary alkylamines (or their conjugated acids) led to a partial replacement of oleylammonium ions with new alkylammonium ions (following a deprotonation/protonation mechanism), which resulted in a boost of the PLQY (up to 100%) and of the NCs' colloidal stability. Similar results in terms of optical properties were achieved by treating Cs-oleate-terminated NCs with alkylammonium-carboxylate or quaternary ammonium-Br (namely, didodecyldimethylammonium-Br, DDA-Br) couples. Interestingly, when the native NCs are ligand exchanged with DDA-Br, the ligand shell is then composed of species not bearing any proton. This, in turn, enabled us to study the interaction of such NCs with a variety of ligands under completely aprotic conditions wherein these DDA-Br-capped NCs were basically inert. The only exceptions were carboxylic, phosphonic, and sulfonic acids that were capable of stripping surface DDA-Br couples. As a note, most studies on CsPbBr3 NCs to date have focused primarily on choosing ligands with specific anchoring groups rather than on tuning the length and type of alkyl chains, as this is time-consuming and requires a large number of syntheses. Our recent developments in the computational chemistry of colloidal NCs are expected to provide a pivotal role in this direction since they can be integrated with machine learning models to investigate with greater details the ligand-NC, ligand-ligand, and ligand-solvent interactions and ultimately find optimal candidates through the prediction of surfactant properties using high-throughput data sets.

Characterizing the Semiconductor Nanocrystal Surface through Chemical Reactivity.

ConspectusMany desirable and undesirable properties of semiconductor nanocrystals (NCs) can be traced to the NC surface due to the large surface-to-volume ratio. Therefore, precise control of the NC surface is imperative to achieve NCs with the desired qualities. Ligand-specific reactivity and surface heterogeneity make it difficult to accurately control and tune the NC surface. Without a molecular-level appreciation of the NC surface chemistry, modulating the NC surface is impossible and the risk of introducing deleterious surface defects is imminent. To gain a more comprehensive understanding of the surface reactivity, we have utilized a variety of spectroscopic techniques and analytical methods in concert.This Account describes our use of robust characterization techniques and ligand exchange reactions in effort to establish a molecular-level understanding of NC surface reactivity. The utility of NCs in target applications such as catalysis and charge transfer hangs on precise tunability of NC ligands. Modulating the NC surface requires the necessary tools to monitor chemical reactions. One commonly utilized analytical method to achieve targeted surface compositions is 1H nuclear magnetic resonance (NMR) spectroscopy. Here we describe our use of 1H NMR spectroscopy to monitor chemical reactions at CdSe and PbS NC surfaces to identify ligand specific reactivity. However, seemingly straightforward ligand exchange reactions can vary widely depending on the NC materials and anchoring group. Some non-native X-type ligands will irreversibly displace native ligands. Other ligands exist in equilibrium with native ligands. Depending on the application, it is important to understand the nature of exchange reactions. This level of understanding can be obtained by extracting exchange ratios, exchange equilibrium, and reaction mechanism information from 1H NMR spectroscopy to establish precise NC reactivity.Reactivity that occurs through multiple, parallel ligand exchange mechanisms can involve both the liberation of metal-based Z-type ligands in addition to reactivity of X-type ligands. In these reactions, 1H NMR spectroscopy fails to discern between an X-type oleate or a Z-type Pb(oleate)2 because only the alkene resonance of the organic constituent is probed by this method. Multiple, parallel reaction pathways occur when thiol ligands are introduced to oleate-capped PbS NCs. This necessitated the use of synergistic characterization methods including 1H NMR spectroscopy, Fourier-transform infrared (FTIR) spectroscopy, and inductively coupled plasma mass spectrometry (ICP-MS) to characterize both surface-bound and liberated ligands.Similar analytical methods have been employed to probe the NC topology, which is an important, but often overlooked, component to NC reactivity given the facet-specific reactivity of PbS NCs. Through the tandem use of NMR spectroscopy and ICP-MS, we have monitored the liberation of Pb(oleate)2 as an L-type ligand is titrated to the NC to determine the quantity and equilibrium of Z-type ligands. By studying a variety of NC sizes, we correlated the number of liberated ligands with the size-dependent topology of PbS NCs.Lastly, we incorporate redox-active chemical probes into our toolbox to study NC surface defects. We describe how the site-specific reactivity and relative energetics of redox-active surface-based defects are elucidated using redox probes and show that this reactivity is highly dependent on the surface composition. This Account is designed to encourage readers to consider the necessary characterization techniques needed establish a molecular-level understanding of NC surfaces in their own work.

The Landscape of Gold Nanocrystal Surface Chemistry.

ConspectusGold nanoparticles (AuNPs) exhibit unique size- and shape-dependent properties not obtainable at the macroscale. Gold nanorods (AuNRs), with their morphology-dependent optical properties, ability to convert light to heat, and high surface-to-volume ratios, are of great interest for biosensing, medicine, and catalysis. While the gold core provides many fascinating properties, this Account focuses on AuNP soft surface coatings, which govern the interactions of nanoparticles with the local environments. Postmodification of AuNP surface chemistry can greatly alter NP colloidal stability, nano-bio interactions, and functionality. Polyelectrolyte coatings provide controllable surface-coating thickness and charge, which impact the composition of the acquired corona in biological settings. Covalent modification, in which covalently bound ligands replace the original capping layer, is often performed with thiols and disulfides due to their ability to replace native coatings. N-heterocyclic carbenes and looped peptides expand the possible functionalities of the ligand layer.The characterization of surface ligands bound to AuNPs, in terms of ligand density and dynamics, remains a challenge. Nuclear magnetic resonance (NMR) spectroscopy is a powerful tool for understanding molecular structures and dynamics. Our recent NMR work on AuNPs demonstrated that NMR data were obtainable for ligands on NPs with diameters up to 25 nm for the first time. This was facilitated by the strong proton NMR signals of the trimethylammonium headgroup, which are present in a distinct regime from other ligand protons' signals. Ligand density analyses showed that the smallest AuNPs (below 4 nm) had the largest ligand densities, yet spin-spin T2 measurements revealed that these smallest NPs also had the most mobile ligand headgroups. Molecular dynamics simulations were able to reconcile these seemingly contradictory results.While NMR spectroscopy provides ligand information averaged over many NPs, the ligand distribution on individual particles' surfaces must also be probed to fully understand the surface coating. Taking advantage of improvements in electron energy loss spectroscopy (EELS) detectors employed with scanning transmission electron microscopy (STEM), a single-layer graphene substrate was used to calibrate the carbon K-edge EELS signal, allowing quantitative imaging of the carbon atom densities on AuNRs with sub-nanometer spatial resolution. In collaboration with others, we revealed that the mean value for surfactant-bilayer-coated AuNRs had 10-30% reduced ligand density at the ends of the rods compared to the sides, confirming prior indirect evidence for spatially distinct ligand densities.Recent work has found that surface ligands on nanoparticles can, somewhat surprisingly, enhance the selectivity and efficiency of the electrocatalytic reduction of CO2 by controlling access to the active site, tuning its electronic and chemical environment, or denying entry to impurities that poison the nanoparticle surface to facilitate reduction. Looking to the future, while NMR and EELS are powerful and complementary techniques for investigating surface coatings on AuNPs, the frontier of this field includes the development of methods to probe the surface ligands of individual NPs in a high-throughput manner, to monitor nano-bio interactions within complex matrices, and to study structure-property relationships of AuNPs in biological systems.

Ligands on Nanocrystal Surfaces, the 1H Nuclear Magnetic Resonance Fingerprint.

ConspectusSurfaces are an integral part of colloidal nanocrystals (NCs). Hence, understanding the binding and packing to NC surfaces of organic ligands, which are often used to stabilize NC colloids, is an essential aspect of the formation of NCs with desired chemical or physical properties. Since NCs lack a unique structure, not a single analytical technique can provide a complete description of the chemistry of NC surfaces. Even so, solution 1H nuclear magnetic resonance spectroscopy stands out as a unique method to study the organic ligand shell for its capability to distinguish between surface bound species and surface inactive residues from NC synthesis and purification.In this account, we first set the stage by highlighting the fingerprints of ligands bound to NCs in solution 1H NMR, which are broadened and shifted resonances, slow diffusion, and pronounced transfer of spin polarization between nearby protons. These characteristics enable bound ligands to be identified and quantified by 1D 1H NMR spectroscopy, diffusion-ordered spectroscopy (DOSY), and nuclear Overhauser effect spectroscopy (NOESY). Even so, we argue in a second part that much more insight in surface chemistry can be obtained from the in situ monitoring of ligand exchange processes. The chemical analysis of released compounds and the thermodynamic study of exchange equilibria provide a surprisingly detailed picture of the chemistry of the NC-ligand bond, the heterogeneity of binding sites, and the bunching of ligands on the NC surface. Multiple case studies are discussed to illustrate these different aspects of NC surface chemistry, where work on CdSe NCs in particular indicates that binding sites at facet edges are most vulnerable for ligand loss. While such weak binding sites are a liability for optoelectronic applications, they could offer an opportunity for catalysis. Moreover, the general character of the methodology introduced calls for realizing a broad, quantitative survey of NC-ligand interactions, well beyond the extensively studied case of CdSe NCs.In a third part, we address in more detail the line broadening that characterizes ligands bound to NCs, which results from a combination of reduced mobility and a diversity of chemical environments. Hence, chemical shift and line shape, or rates of transversal relaxation and interligand cross-relaxation, can all convey information on the ligand environment, especially when solvents are used that are chemically distinct from the ligand chain, such as aromatic versus aliphatic. Two examples that illustrate this point are the relation between line width and ligand solvation, where better solvated ligands yield more narrow resonances, and the possibility to identify different parts of the inhomogeneously broadened resonance with ligands bound on different locations at the NC surface. Interestingly, such results question the limits of NC size and ligand packing density at which the current bound-ligand paradigm, modest inhomogeneous broadening, will break down. Building on this question, we summarize in a final part the current status of NC ligand analysis by solution 1H NMR and outline directions for further research.

The Surface Chemistry of Colloidal Nanocrystals Capped by Organic Ligands

The Surface Chemistry of Colloidal Nanocrystals Capped by Organic Ligands

Classical Force Field Parameters for InP and InAs Quantum Dots with Various Surface Passivations.

Classical molecular dynamics (MD) simulations on realistic colloidal quantum dot (QD) systems are often hampered by missing force field (FF) parameters for an accurate description of the QD-ligand interface. However, such calculations are of major interest, specifically for studying the surface chemistry of colloidal nanocrystals. In this work, we have utilized a previously published stochastic optimization algorithm to obtain FF parameters for InP and InAs QDs capped by Cl, amine, carboxylate, and thiolate ligands. Our FF parameters are interfaced with well-established FFs for organic molecules, allowing for the simulation of InP and InAs QDs with a broad range of organic ligands in explicit apolar solvents. The quality of our FF parameters was assessed by comparing properties of the classical MD simulations with ab initio MD simulations and experimental and theoretical values from the literature.

Effect of modulator ligands on the growth of Co2(dobdc) nanorods.

Control over the size, shape, uniformity, and external surface chemistry of metal-organic framework nanocrystals is important for a wide range of applications. Here, we investigate how monotopic modulators that mimic the coordination mode of native bridging ligands affect the growth of anisotropic Co2(dobdc) (dobdc4- = 2,5-dihydroxy-1,4-benzenedicarboxylic acid) nanorods. Through a combination of transmission electron microscopy (TEM) and nuclear magnetic resonance spectroscopy (NMR) studies, nanorod diameter was found to be strongly correlated to the acidity of the modulator and to the degree of modulator incorporation into the nanorod structure. Notably, highly acidic modulators allowed for the preparation of sub-10 nm nanorods, a previously elusive size regime for the M2(dobdc) family. More broadly, this study provides new insights into the mechanism of modulated growth of metal-organic framework nanoparticles.

Alteration of the cellulose nanocrystal surface chemistry for guided formation of polymer brushes

Controlled grafting of polymers through Surface-Initiated Atom Transfer Radical Polymerization (SI-ATRP) from cellulose nanocrystals (CNC) without losing its morphology and structural properties.

The Influence of the Surface Chemistry of Cellulose Nanocrystals on Ethyl Lauroyl Arginate Foam Stability.

Guanidine-based surfactant ethyl lauroyl arginate (LAE) and cellulose nanocrystals (CNCs) form complexes of enhanced surface activity when compared to pure surfactants. The LAE-CNC mixtures show enhanced foaming properties. The dynamic thin-film balance technique (DTFB) was used to study the morphology, drainage and rupture of LAE-CNC thin liquid films under constant driving pressure. A total of three concentrations of surfactant and the corresponding mixtures of LAE with sulfated (sCNC) and carboxylated (cCNC) cellulose nanocrystals were studied. The sCNC and cCNC suspension with LAE formed thin films, with stability increasing with surfactant concentration and with complex rheological properties. In the presence of LAE, the aggregation of CNC was observed. While the sCNC aggregates were preferentially present in the film volume with a small fraction at the surface, the cCNC aggregates, due to their higher hydrophobicity, were preferentially located at film interfaces, forming compact layers. The presence of both types of aggregates decreased the stability of the thin liquid film compared to the one for the LAE solution with the same concentration. The addition of CNC to LAE was critical for foam formation, and foam stability was in qualitative agreement with the thin films' lifetimes. The foam volume increased with the LAE concentration. However, there was an optimum surfactant concentration to achieve stable foam. In particular, the very resistant foam was obtained with cCNC suspensions that formed the interfaces with a complex structure and rheology. On the other hand, at high LAE concentrations, the aggregates of CNC may exhibit antifoaming properties.

(Invited) Ligand Exchange at Chalcogenide and Perovskite Nanocrystal Surfaces Examined Via Isothermal Titration Calorimetry

I will describe our group’s efforts to quantify ligand association and exchange reactions on semiconductor nanocrystal (NC) surfaces via isothermal titration calorimetry (ITC). ITC provides a direct thermal measurement of reaction progress. As shown in earlier work by our group and others examining ligand exchange on chalcogenide and pnictide quantum dots, ITC is able to access the enthalpy change of reaction, equivalency, and effective equilibrium constants, including in cases that are challenging to resolve by NMR alone. Here, we will describe the extension of this approach to ligand exchange reactions on halide perovskite NCs, and to ligand exchange on chalcogenide NCs in aqueous solution. Such advances are needed to contribute a quantitative description of NC surface chemistry toward applications such as advanced optoelectronic devices, bioimaging probes, and photocatalysis.

The Chemistry of Cu3N and Cu3PdN Nanocrystals**

AbstractThe precursor conversion chemistry and surface chemistry of Cu3N and Cu3PdN nanocrystals are unknown or contested. Here, we first obtain phase‐pure, colloidally stable nanocubes. Second, we elucidate the pathway by which copper(II) nitrate and oleylamine form Cu3N. We find that oleylamine is both a reductant and a nitrogen source. Oleylamine is oxidized by nitrate to a primary aldimine, which reacts further with excess oleylamine to a secondary aldimine, eliminating ammonia. Ammonia reacts with CuI to form Cu3N. Third, we investigated the surface chemistry and find a mixed ligand shell of aliphatic amines and carboxylates (formed in situ). While the carboxylates appear tightly bound, the amines are easily desorbed from the surface. Finally, we show that doping with palladium decreases the band gap and the material becomes semi‐metallic. These results bring insight into the chemistry of metal nitrides and might help the development of other metal nitride nanocrystals.

The Chemistry of Cu3 N and Cu3 PdN Nanocrystals.

The precursor conversion chemistry and surface chemistry of Cu3N and Cu3PdN nanocrystals are unknown or contested. Here, we first obtain phase‐pure, colloidally stable nanocubes. Second, we elucidate the pathway by which copper(II) nitrate and oleylamine form Cu3N. We find that oleylamine is both a reductant and a nitrogen source. Oleylamine is oxidized by nitrate to a primary aldimine, which reacts further with excess oleylamine to a secondary aldimine, eliminating ammonia. Ammonia reacts with CuI to form Cu3N. Third, we investigated the surface chemistry and find a mixed ligand shell of aliphatic amines and carboxylates (formed in situ). While the carboxylates appear tightly bound, the amines are easily desorbed from the surface. Finally, we show that doping with palladium decreases the band gap and the material becomes semi‐metallic. These results bring insight into the chemistry of metal nitrides and might help the development of other metal nitride nanocrystals.

Nanocrystal Superparticles with Whispering-Gallery Modes Tunable through Chemical and Optical Triggers.

Whispering-gallery microresonators have the potential to become the building blocks for optical circuits. However, encoding information in an optical signal requires on-demand tuning of optical resonances. Tuning is achieved by modifying the cavity length or the refractive index of the microresonator. Due to their solid, nondeformable structure, conventional microresonators based on bulk materials are inherently difficult to tune. In this work, we fabricate irreversibly tunable optical microresonators by using semiconductor nanocrystals. These nanocrystals are first assembled into colloidal spherical superparticles featuring whispering-gallery modes. Exposing the superparticles to shorter ligands changes the nanocrystal surface chemistry, decreasing the cavity length of the microresonator by 20% and increasing the refractive index by 8.2%. Illuminating the superparticles with ultraviolet light initiates nanocrystal photo-oxidation, providing an orthogonal channel to decrease the refractive index of the microresonator in a continuous fashion. Through these approaches, we demonstrate optical microresonators tunable by several times their free spectral range.