Superior Force Research Articles

PSICOLOGIA DA RELIGIÃO: VERTENTES DA ESPIRITUALIDADE INTEGRADAS À PSICOLOGIA

The presence of spirituality in the daily life of society is indisputable, even those who say they have no religious affiliation believe in the existence of a God or a superior force that helps to deal with traumas, conflicts and/or decision-making. Psychology comprises a branch of fundamental questions with in-depth discussions about the integrative aspects of the human being. Spiritual questions aim to establish answers to the invisible, in the belief and faith of the community, presenting themselves as a tool for integration in therapeutic management. The study is highly necessary, as it addresses the bio-psycho-social-spiritual being that resides in each man and woman. On the other hand, reaffirm that spirituality cannot be ignored when it is manifested in the therapeutic environment, as the aforementioned manifestation comes from the subjective element of that being.

Waveform Analysis To Identify Biomechanical Relationships and Differences Between Softball Pitchers With and Without Pain.

Softball pitchers accrue high rates of injury. Research suggests certain mechanics at discrete pitch events are related with pain. Here, we examine relationships between peak throwing shoulder kinetics and trunk/pelvis kinematics and compare trunk/pelvis kinematics between pitchers who were healthy and those currently experiencing pain. (1) Peak shoulder kinetics would be positively related to greater trunk and pelvis flexion, lateral flexion, and rotation; and (2) pitchers in pain would exhibit greater trunk and pelvis flexion, lateral flexion, and rotation during the pitch than those who were pain-free. Cross-sectional study. A total of 42 high school pitchers (height, 1.71 ± 0.06 m; weight, 75.0 ± 15.9 kg; age, 16 ± 2 years) were separated into 2 groups based on presence or absence of pain. Peak kinetic data from 3 pitches per pitcher were averaged and used as dependent variables. Kinematic data were averaged across 3 trials, and time normalized to 101 datapoints between foot contact and follow-through of the pitch. Statistical parametric mapping regressions were used to assess the relationships between peak shoulder kinetics and waveform of trunk and pelvis kinematics. Pelvic lateral tilt significantly predicted peak throwing shoulder superior (P = 0.05) and lateral (P = 0.04) force. Pelvis rotation predicted peak superior force (P = 0.02). Waveform analyses revealed no waveform differences between healthy pitchers and those currently experiencing pain. Peak shoulder kinetic variables are related with pelvic positioning during the pitch; however, trunk and pelvis kinematics do not differ according to presence of pain. Pitchers in pain do not adopt specific trunk and pelvic alterations during the pitch, potentially concealing the effects of pain from visual identification. Coaches and clinicians need to discuss health status with pitchers versus relying on visual observations to understand pain and injury risk.

3D-printed poly(p-dioxanone)/graphene oxide composite bioresorbable stents for congenital heart disease treatment

Bioresorbable stents (BRSs) offer significant advantages in treating congenital heart disease-related vascular stenoses, especially for pediatric patients. However, the insufficient mechanical performance of polymeric BRSs remains a critical challenge. In this study, Poly(p-dioxanone) (PPDO) was incorporated with graphene oxide (GO) for the first time to improve both mechanical properties and biocompatibility. PPDO/GO composites with varying GO contents were fabricated via solution mixing and solvent casting, and tensile tests revealed that lower GO content levels (0.2% and 0.5%) significantly improved the Young’s modulus, tensile strength, and elongation at break of PPDO due to hydrogen bonding and increased degree of crystallinity. 3D-printed PPDO/GO sliding-lock stents with optimal GO contents were fabricated by fused deposition modeling and demonstrated superior compression force compared to pristine PPDO stents. In vitro hemocompatibility and cytocompatibility assessments showed that 3D-printed PPDO/GO stents exhibited low hemolysis rate, reduced platelet adhesion, and enhanced adhesion and proliferation of endothelial cells. In vivo evaluation further demonstrated improved endothelialization in rat abdominal aortas implanted with 3D-printed PPDO/GO filaments for 4 weeks. Overall, PPDO/0.5%GO exhibited superior performance in compression force, hemocompatibility, cytocompatibility, and in vivo endothelialization. This study, for the first time, combines PPDO with GO and explains the mechanism of the enhanced mechanical properties of PPDO/GO composite material. Using 3D printing, PPDO/GO BRS with improved compression performance and biocompatibility were developed, highlighting its potential value for treating pediatric patients with CHD-related vascular stenoses.

Professional baseball pitchers produce similar ball velocity and kinematics when pitching from the wind-up and stretch deliveries: a biomechanical analysis

ABSTRACT Historically, the wind-up delivery is considered a more biomechanically advantageous pitching motion compared to the stretch. Recently, some pitchers have shifted to pitching exclusively from the stretch regardless of the game situation. The goal of this study was to compare temporal, kinematic and kinetic variables between the wind-up and stretch deliveries. Professional pitchers (n = 52, 189.1 ± 4.8 cm, 92.8 ± 8.4 kg) threw fastballs evaluated by 3D-motion capture (480 Hz) from both the wind-up and stretch deliveries. Within a pitcher, there was no significant difference in ball velocity between the two deliveries (p = 0.15). The stretch delivery was significantly quicker to ball release at toe off 2 (p < 0.001) (the last frame the pitcher’s foot contacts the ground before progressing to maximum knee height) and maximum knee height (p < 0.001). The majority of differences occurred prior to foot contact. The wind-up delivery produced greater maximum shoulder external rotation (p < 0.001) and lead knee flexion at ball release (p < 0.001). Pitching from the stretch incurred greater shoulder superior force (p < 0.001). It remains unknown if this is clinically significant as pooled means show only a 2% difference. Therefore, pitching a fastball from either the wind-up or stretch delivery provides comparable mechanics and throwing arm load with likely comparable risk of injury.

Generation and evaluation of unimaginable three-dimensional structural joints using generative adversarial networks

Compared to the increasingly programmable and automated structural analysis methods, the current joint design suffers from long design time, poor quality and a low degree of automation. Developing an efficient and intelligent method to generate structurally novel and high-performing joints has become an urgent task. This paper combines artificial intelligence, topology optimization and reverse engineering techniques to develop a method named HD-JointGEN, and elaborates the idea and implementation steps of this method through an actual engineering example of a single-layer reticulated shell structure. The joints generated in batch by HD-JointGEN are analyzed and evaluated, revealing that the selected representative joint can reduce self-weight by 29.55%, maximum displacement by 0.99%, and maximum equivalent stress by 1.28% compared to the topology optimization joint. HD-JointGEN not only automatically generates a variety of innovative and previously unimaginable joints but also offers design solutions with superior force performances. It leads the research on intelligent generative design of the connection in complex three-dimensional structures and has broad application prospects.

Preparation and properties of biomimetic bone repair hydrogel with sandwich structure.

One of the critical factors that determines the biological properties of scaffolds is their structure. Due to the mechanical and structural discrepancies between the target bone and implants, the poor internal architecture design and difficulty in degradation of conventional bone implants may cause several adverse outcomes. To date, many scaffolds, such as 3-D printed sandwich structures, have been successfully developed for the repair of bone defects; however, the steps of these methods are complex and costly. Hydrogels have emerged as a unique scaffold material for repairing bone defects because of their good biocompatibility and excellent physicochemical properties. However, studies exploring bioinspired hydrogel scaffolds with hierarchical structures are scarce. More efforts are needed to incorporate bioinspired structures into hydrogel scaffolds to achieve optimal osteogenic properties. In this study, we developed a low-cost and easily available hydrogel matrix that mimicked the natural structure of the bone's porous sandwich to promote new bone growth and tissue integration. A comprehensive evaluation was conducted on the microstructure, swelling rate, and mechanical properties of this hydrogel. Furthermore, a 3D finite element analysis was employed to model the structure-property relationship. The results indicate that the sandwich-structured hydrogel is a promising scaffold material for bone injury repair, exhibiting enhanced compressive stress, elastic modulus, energy storage modulus, and superior force transmission.

Comparative Study between Titanium Miniplates and Three-dimensional C Plates for Fixation of Mandibular Fractures in the Mental Nerve Region: Randomised, Clinical Study

Abstract Introduction: Mandibular fractures, representing 35.54%–44.2% of facial fractures, often affect the mandibular body and subcondylar region. Effective treatment seeks optimal reduction, stable fixation and functional restoration. This study assesses a modified three-dimensional C plate’s efficacy in treating mandibular fractures, emphasising occlusal forces and the mental nerve region. Materials and Methods: A randomised clinical trial (2019–2024) involving 20 patients with mandibular fractures was conducted. Group A (10 patients) received the modified C titanium plate and Group B (10 patients) received conventional miniplates. The clinical parameters – pain, occlusion, mobility, bite force and neurosensory deficits – were evaluated pre- and postoperatively at various intervals. Statistical analysis was performed using the SPSS software. Results: Group A shows superior bite force and functional outcomes, with significant neurosensory recovery by the 10th day. Both groups had no plate fractures, screw loosening or infections. Group A also had better stability, reduced procedural time and improved post-operative comfort. Conclusions: The modified C miniplate provides superior stabilisation, simplifies application, reduces complications and enhances early functional recovery compared to conventional miniplates.

Functional Binder with Enhanced Chemical Adsorption for Black Phosphorus Anode in Lithium‐Ion Capacitors

AbstractBlack phosphorus (BP) has been recognized as an ideal anode material for fast‐charging lithium (Li)‐ion capacitors (LICs) due to its high theoretical capacity (2596 mAh g−1), appropriate lithiation potential (0.7 V vs Li+/Li) and fast ion diffusion capability. However, large volume change and soluble polyphosphides (LixPs)‐based intermediates during charging‐discharging process seriously deteriorate cycling performance. To address the aforementioned issues, an elaborated design is reported on the binder for BP electrode. The ‐NH2 polar functional group in grafted chitosan (GCS) binder presents strong chemical anchoring effect for both BP and soluble LixPs, achieving superior adhesion force and LixPs constraining capability for enhanced structure integrity of BP electrode. In addition, GCS exhibits strong Li‐ion binding energy that promotes the Li‐ion adsorption at electrode level, leading to a boosted cycle life for BP. As a result, the graphene (G) incorporated BP electrode using GCS binder shows specific capacity of 997.6 mAh g−1 after 400 cycles at 1 A g−1. This study unravels the crucial role of functional groups for binder in high‐performance BP electrode.

Impact of Stiffness of Quadriceps on the Pedaling Rate of Maximal Cycling.

to investigate the relationship between musculoarticular stiffness and pedaling rate. twenty-two healthy, untrained male volunteers (19 ± 2 years, 175 ± 6 cm, 74 ± 16 kg) were divided into two groups after their musculoarticular (MA) stiffness was tested, and these groups were the stiffness group (SG) and compliant group (CG). A 6-s maximal cycling test was conducted in four cycling modes, which were levels 5 and 10 air-resistance, and levels 3 and 7 magnetic-resistance. Peak and average cadence, peak power output (POpeak), crank force (CFpeak), peak rate of crank force development (RCFD), and the angle of peak crank force were collected. The significance of differences between the two groups for these variables was assessed using an independent samples t-test. Pearson product-moment correlations were calculated to analyze the relationship between MA stiffness and each performance variable. the SG had significantly higher peak cadence and average cadence at level 3 magnetic-resistance, peak crank force, and peak power output at level 10 air-resistance, peak rate of crank force development at levels 5 air-resistance, 10 air-resistance, and 3 magnetic-resistance (p < 0.05). MA stiffness was significantly correlated with average cadence at levels 5 and 10 air-resistance, peak crank force in all 4 modes, and RCFD and peak power output at level 10 air-resistance. There were no significant relationships between MA stiffness and the angle of peak crank force in each cycling mode. results indicate that participants with relatively higher MA stiffness seemed to have a higher pedaling rate during a 6-s sprint cycling in these conditions. They also performed a superior crank force and rate of crank force development, producing greater power output when sprint cycling. Optimizing cycling resistance or gear ratio to enhance both RCFD and musculotendinous stiffness may be crucial for improving sprint cycling performance.

Highly Efficient Laser Bidirectional Graphene Printing: Integration of Synthesis, Transfer and Patterning.

Graphene has tremendous potential in future electronics due to its superior force, electrical, and thermal properties. However, the development of graphene devices is limited by its complex, high-cost, and low-efficiency preparation process. This study proposes a novel laser bidirectional graphene printing (LBGP) process for the large-scale preparation of patterned graphene films. In LBGP, a sandwich sample composed of a thermoplastic elastomer (TPE) substrate, carbon precursor powder, and a glass cover is irradiated by a nanosecond pulsed laser. The laser photothermal effect converts the carbon precursor into graphene, with partial graphene sheets deposited directly on the TPE substrate and the remaining transferred to the glass cover via a laser-induced plasma plume. This method simultaneously prepares two face-to-face graphene films in a single laser irradiation, integrating synthesis, transfer, and patterning. The resulting graphene patterns demonstrate good performance in flexible pressure sensing and Joule heating, showcasing high sensitivity (7.7kPa-1), fast response (37ms), and good cycling stability (2000 cycles) for sensors, and high heating rate (1°Cs-1) and long-term stability (3000s) for heaters. It is believed that the simple, low-cost, and efficient LBGP process can promote the development of graphene electronics and laser manufacturing processes.

Efficacy and safety of a new torque-controlled angiographic catheter in cerebral angiography: A multicenter, randomized, open-label trial

ObjectiveWe aimed to examine the effectiveness and safety of a novel torque-controlled catheter for cerebral angiography. MethodsA total of 417 patients who underwent routine transfemoral cerebral angiography were enrolled in a randomized controlled study to compare the new torque-controlled and control group catheters. Device success was assessed on parameters such as the assessment of the common carotid artery, device rotation force, and success rate with the crossover group after the failed procedure. Four neurointerventionalists investigated the degree of satisfaction of using the new device. Superiority and non-inferiority tests of satisfaction scores were estimated for the new torque-controlled and the control group catheters. ResultsThe new torque-controlled catheter showed improved performance in terms of technical device success (92.79 vs. 98.09 %, P = 0.010), crossover after technical device failure (0 vs. 86.67 %, P = 0.004), and common carotid artery access (92.79 vs. 98.56 %, P = 0.004). The flexibility and rotational force of the new torque-controlled catheter were higher than those of the control group catheters (75.48 vs. 100 %, P < 0.001). No marked adverse cerebrovascular accidents or vessel damage occurred in either group during the procedure. The differences between the two groups in terms of the device rotational force and operator satisfaction were 1.836 (1.765–1.907) and 2.092 (2.000–2.183), respectively. The new torque-controlled catheter showed superior device rotational force satisfaction, operator satisfaction, and manufacturer satisfaction, with statistical significance. ConclusionThe new torque-controlled catheter was effective, safe, and convenient compared to the control group catheters for diagnostic cerebrovascular angiography.

Superior electroadhesion force with permittivity-engineered bilayer films using electrostatic simulation and machine learning approaches

Electroadhesive forces are crucial in various applications, including grasping devices, electro-sticky boards, electrostatic levitation, and climbing robots. However, the design of electroadhesive devices relies on speculative or empirical error approaches. Therefore, we present a theoretical model comprising predictive coplanar electrodes and protective layers for analyzing the electrostatic fields between an object and electroadhesive device. The model considers the role of protective layer and the air gap between the electrode surface and the object. To exert a higher electroadhesive force, the higher permeability of the protective layer is required. However, a high permeability of the protective layer is hard to withstand high applied voltage. To overcome this, two materials with different permeabilities were employed as protective layers—a low-permeability inner layer and a high-permeability outer layer—to maintain a high voltage and generate a large electroadhesive force. Because a low-permeability inner layer material was selected, a more permeable outer layer material was considered. A theoretical analysis revealed complex relationships between various design parameters. The impact of key design parameters and working environments on the electroadhesion behavior was further investigated. This study reveals the fundamental principles of electroadhesion and proposes prospective methods to enhance the design of electroadhesive devices for various engineering applications.

Design and application of bidirectional soft actuator with multiangle chambers

Purpose This study aims to introduce a novel bidirectional soft actuator as an enhancement to conventional pneumatic network actuators. This improvement involves integrating air chambers positioned at specific angles to improve stability, adaptability and grasping efficiency in various environments. Design/methodology/approach The design approach incorporates air chambers positioned at a 45° angle relative to the horizontal direction at the actuator's terminus, along with additional chambers at a 90° angle. Mathematical models are developed for longitudinal and transverse bending, as well as for obliquely connected cavities, based on the assumption of piecewise constant curvature. Analyses are conducted on output forces, bending characteristics and end contact areas for both transverse and longitudinal ends. Findings The proposed soft actuator surpasses traditional pneumatic network actuators in gripping area due to the inclusion of a diagonal air cavity and a transverse pneumatic network structure at the terminus. As a result, it provides torsion and gripping force in both directions. Testing on a dedicated platform with two variants of grippers demonstrates superior gripping force capability and performance in complex environments. Practical implications Through the design of multiangle chambers, the soft actuator exhibits diverse driving angles and morphological variations, offering innovative design perspectives for industrial grasping. Social implications The design of multiangle chambers facilitates personalized configurations of soft actuators by researchers, enabling tailored angles for specific interaction environments to achieve desired functionalities. This approach offers novel insights into soft actuator design, addressing more prevalent industrial grasping challenges. Originality/value This study introduces a novel soft actuator design that significantly enhances gripping capabilities in comparison to conventional pneumatic network actuators. The incorporation of specific air chamber configurations and mathematical modeling provides valuable insights for the development of adaptable and efficient robotic grippers for industrial and household applications.

«В Коауиле провозглашается коммунизм». Эпизод из истории Мексиканской революции (1912 г.)

The article deals with a little-known and little-studied episode from the history of the Mexican Revolution of 1910-1917, the proclamation of communism by anarchist guerrillas in the state of Coahuila in 1912. A brief but vivid history of the guerrillas, organized by the Magonists from the Mexican Lib-eral Party (PLM) at one of the key moments of the revolution, is considered in the context of the general role of the anar-chist movement at various stages of the revolution in Mexico, of evolution of its ideology, strategy and tactics. An attempt has been made to assess the significance of the events under consideration for the development of the anarchist movement in the world. PLM, led by brothers Riсardo and Enrique Flo-res Magon, was in 1906-1908 the first political force that launched a rebel movement against the dictatorship of Porfirio Diaz, and in 1910-1911 made a significant contribu-tion to the overthrow of the regime. However, after this, the leadership of the Mexican Liberal Party officially switched to the position of anarchism, and its supporters tried to organize a guerrilla movement with the aim of carrying out a social revolution in Mexico. Although the PLM rebel forces were crushed by superior government forces in 1912, and many of their members were killed, the proclamation of anarchist communism by a group of guerrillas on February 9, 1912 in the Mexican state of Coahuila, one of the traditional areas of influence of the Magonists, was the first act of this kind in the history of world anarchist movement and served as an example for anarchists in other countries.

Case Study Of The Battle Of Red Cliff In The Late Han Dynasty Era

The Battle of Red Cliff, also known as the Battle of Chibi, was a decisive naval battle in the winter of 208-209 AD during the late Han Dynasty, about twelve years before the beginning of the Three Kingdoms Period in Chinese history, the battle was fought between the allied forces of Sun Quan, Liu Bei and Liu Qi against the superior forces of the Northern Warlord Premier Cao Cao. Liu Bei and Sun Quan thwarted Cao Cao's attempt to conquer the southern Yangtze River and reunite the Eastern Han Dynasty Kingdom. In this river warfare, the superiority of weather, wind direction, knowledge of the seasons, and war strategy using ships became dominant compared to the number of troops, knowledge of the terrain was the key to the victory of Liu Bei and Sun Quan's alliance. From this story we can learn that the superior power was defeated by the weaker Imperior Power but had the right Strategy at the right time and the Red Cliff was a witness to the battle of the two warring parties, where the Liu Bei and Sun Quan alliance became the Winner.

Enhancement of the piezoelectric performance of GN nanosheets/PVDF nanocomposite film using electrostatic layer and penetrated electrode

The efficiency of the piezoelectric nanogenerator is a vital factor for the superior performance of the nanogenerator to achieve a green and eco-friendly technology in the development of modern electronics. Piezoelectric nanogenerators (PNGs) have limited use in mechanical energy harvesting due to their low output performance. The output has been a major source of concern for PNG's development. A new design of PNG based on g-C3N4 nanosheets(GN)/PVDF nanocomposite film (GPNC) using penetrated Cu electrode and electrostatic layer is proposed to overcome this problem. By creating numerous peripheral contacts within the piezoelectric material, the overall number of surface polarization charges increased. Also, an electrostatic contribution from graphene oxide contributes to an increased output voltage. The syngeristic effect of high % γ-nuclei, penetrated electrode, and electrostatic effect is supposed to vital for carry out significant piezoelectric outputs (V∼34.4 V and I ∼3.2 µA) and superior force sensitivity (0.93 V/kPa). In practical applications, the designed PNG can competently harvest electrical energy from various human movements, and also can detect low physiological actions. Our work offers a simple but effective perspective for high-performance piezoelectric nanogenerator fabrication and progress a stride toward self-powered day-to-day used electronics.

Two-axis Lorentz actuator for active vibration isolation system in optical payloads

Active vibration isolation systems (AVISs) equipped with Lorentz actuators are utilized in diverse sectors to minimize vibrations transmitted to delicate payloads by offering controlled stiffness and damping. Traditional actuators in AVISs, however, are confined to a single degree of freedom (DOF). This implies that a higher number of these types of actuators is necessary to achieve vibration isolation across all six DOF in an AVIS. Consequently, this can amplify assembly errors and prolong response times, thereby compromising system performance. They also present challenges related to thrust, weight, and heat dissipation. This paper delves into the design, modeling, optimization, and validation of an innovative 6-DOF AVIS which can apply various payloads to generate various displacements and performs consistently over a range of payloads. The main feature of the proposed system is its two-axis Lorentz actuator (TALA). With identical configurations for both axes, the TALA facilitates 2-DOF in-plane motion with mutual decoupling, a novel feature in AVISs, to the best of our knowledge. Moreover, through a parametric design strategy and multi-objective optimization, it achieves a superior force constant, reduced coil weight, and minimized heat dissipation. Results from the proposed AVIS underscore its promise as a versatile tool for ultraprecision measurement instruments, including atomic force microscopes, scanning probe microscopes, and optical payloads.

Local delivery of methotrexate/glycyrrhizin-loaded hyaluronic acid nanofiber for the management of oral cancer

The challenges in treating oral cancer include the limited effectiveness and systemic side effects of conventional chemotherapy and radiation therapy. Hyaluronic acid (HA) based Glycyrrhizin (GL) and Methotrexate (MT) loaded localized delivery systems, specifically nanofiber (NF) based platforms, were developed to address these challenges. The electrospinning method was used for the successful fabrication of a homogenous NF membrane and characterized for morphology, drug entrapment efficiency, tensile strength, and ex-vivo mucoadhesive study. Also, it was evaluated for in-vitro drug release profile, ex-vivo drug permeability, in-vitro anti-inflammatory, apoptosis assay by MTT and flow, and against specific cell lines in order to determine their potential for therapeutic use. Superior tensile breaking force (50 g), mucoadhesive strength of 153 gm/cm2, drug permeability, and releasing properties of designed NF, making them perfect requirements for oral cavity delivery. The anticancer potential of MT in the MTT assay and flow cytometry analysis was significantly increased in oral epidermal carcinoma cell (KB cell) for drug-loaded NF with 63.97 ± 1.99 % apoptosis, at 24 h. With these incorporated, GL with MT in NF had an anti-inflammatory potential, also demonstrated in-vitro and in-vivo. In the Ehrlich Ascites Carcinoma (EAC) induced mice model, the optimal formulation’s shows better potential for tumor regression when comparing the developed NF formulation to the drugs. Experimental results show that by lowering mucositis-related inflammation and enhancing the effectiveness of oral cancer treatment, a developed nanofiber-based local drug delivery system offers a feasible strategy for managing oral cancer.

An Analysis of Intrapitch Variation in Joint and Segment Velocities With Throwing Arm Kinetics in High School and Professional Baseball Pitchers

Background: Improper sequencing order of maximal joint and segment velocities has been identified as an important predictor for both throwing arm kinetics and ball velocity. Purpose: To investigate the intrapitcher variation of maximal segment velocities and the relationship to throwing arm kinetics and ball velocity in high school (HS) and professional (PRO) pitchers. Study Design: Descriptive laboratory study. Methods: HS (n = 59) and PRO (n = 338) pitchers, instructed to throw 8 to 12 fastball pitches, were evaluated with 3-dimensional motion capture (480 Hz). Maximal joint and segment velocities were calculated for each pitch, and the standard deviation of the maxima was calculated per pitcher. These standard deviations were used to classify pitchers as “low variance” or “high variance” for each segmental velocity subgroup, “overall low variance” or “overall high variance” based on cumulative segment velocity variation, or “population,” with any pitcher eligible to be included in multiple subcategories. Maximal velocities and throwing arm kinetics were compared among the various subgroups. Results: The HS low-variance shoulder internal rotation velocity subgroup (4949 ± 642 deg/s) had significantly lower maximal shoulder internal rotation velocity compared with HS population (5774 ± 1057 deg/s) (P < .001); similar findings were observed for PROs (5269 ± 835 vs 5824 ± 1076 deg/s; P < .001), as well as lower shoulder superior force compared with the PRO population (14.8% ± 8.8% vs 17.8% ± 8.8% body weight; P = .001). The PRO low-variance lead knee extension velocity subgroup had significantly lower maximal lead knee extension velocity (216 ± 135 vs 258 ± 125 deg/s; P = .001) and shoulder distractive force (111.5% ± 14.4% vs 115.6% ± 15.9% body weight; P = .003) compared with the PRO population. The PRO overall low-variance subgroup had significantly lower shoulder distractive force (111.8% ± 14.1% vs 119.6% ± 15.5% body weight; P = .008) and elbow anterior force (40.6% ± 5.0% vs 43.6% ± 6.2% body weight; P = .008) compared with the PRO overall high-variance subgroup. Conclusion: HS and PRO pitchers with low variance for joint and segment velocities achieved significantly lower maximal velocities in the subgroup of interest, while preserving ball velocity. PRO pitchers with overall low variance among multiple maximal joint and segment velocities demonstrated decreased shoulder distractive and elbow anterior force. Clinical Relevance: PRO pitchers with low intrapitch variation in maximal joint and segment velocities may be viewed as kinetically conservative throwers. These pitchers with similarly maintained mechanics between pitches may have an increasingly regimented form that preserves kinetic forces about the throwing arm. The opposite may be true for PRO pitchers with increased variability in segmental velocities during their pitching motion, as they showed increased throwing arm kinetics including shoulder distractive and elbow anterior force compared with the overall low-variance group, theoretically increasing their risk of injury.

The Effects of Different Beverages on Fracture Resistance of CAD/CAM Monolithic PEEK and Monolithic Zirconia Crowns

Aim: To assess the impact of various beverages on the fracture resistance of CAD/CAM polyetheretherketone (PEEK) and monolithic zirconia materials. Materials and Method: We fabricated eighty CAD/CAM materials from PEEK polymer (CopraPeek; Whitepeaks Dental Solutions GmbH, Germany) and monolithic zirconia (inCoris TZI; Dentsply Sirona Systems GmbH, Bensheim, Germany), with ten samples per group. These samples were submerged in either distilled water, cola, coffee, or red wine and stored at 37°C for 12 days. We utilized a universal testing machine (Lloyd LRX; Lloyd Instruments Ltd., West Sussex, UK) to measure each sample’s fracture resistance. The t-test provided a comparison of normally distributed variables between the two groups. For multiple group comparisons, we executed an analysis of variance (ANOVA). Results: A statistically significant difference was observed between the PEEK and zirconia groups in terms of maximum load and elastic load-bearing capacity values (p˂0.05), with zirconia materials yielding higher values. However, there was no critical difference in these measures obtained from different solutions for neither PEEK nor zirconia samples (p&gt;0.05). Conclusion: CAD/CAM monolithic PEEK material stored in various solutions demonstrated lower fracture resistance and elastic strength than monolithic zirconia materials. Despite this, PEEK exhibited the highest fracture resistance to intraoral occlusal forces. Accordingly, due to its chemically inert nature and superior force absorption, we recommend PEEK as a viable alternative material for posterior crowns in fixed restorations.