Supercritical Fluid Chromatography Research Articles

The Impact of Water as an Additive on the Elution of Some Basic Organic Compounds in Supercritical Fluid Chromatography.

In this study, water was used as an additive in the methanol-modified carbon dioxide-based eluent for the elution of some basic organic compounds from a hybrid silica column via supercritical fluid chromatography (SFC). The experiments were applied to sulfonamides, propranolol, and other organic nitrogen compounds involving aromatic rings from different classes of amine, pyrimidine, and purine with different pKa values (the pKa values for the studied analytes range from 4.6 to 10.4). The results revealed different responses to the different percentages of water addition. Adding 1~2% of water to the modifier (methanol) led to a positive effect manifested by more symmetrical peak shapes and reduced retention times for most compounds. The key factor for this improvement in the properties of chromatographic peaks is due to the adsorption of water on the silanol groups of the stationary phase, consequently resembling the phenomena observed in hydrophilic interaction liquid chromatography (HILIC). Moreover, the availability of hydrogen bond acceptor and donor sites in the analyte structure is an important factor to be considered when adding water as an additive to the modifier for improving the chromatographic peaks. However, introducing water in an amount higher than 3% resulted in perturbed chromatographic signals. It was also found that water as an additive alone could not successfully elute propranolol from the hybrid silica column with an acceptable peak shape; thus, the addition of a strong base such as amine salts was also necessary. The proposed use of a particular amount of water in the mobile phase could have a positive effect compared to the same mobile phase without water, improving the chromatographic peak properties of the elution of some basic organic compounds from the hybrid silica column.

Innovative orthogonal two-dimensional reversed-phase liquid chromatography × supercritical fluid chromatography with a phenyl/tetrazole stationary phase for the preparative isolation of diarylheptanoids

In this investigation, we successfully isolated and purified natural diarylheptanoids using an orthogonal offline two-dimensional RPLC × SFC approach, employing only the phenyl/tetrazole stationary phase. First, a styrene-divinylbenzene matrix medium pretreatment liquid chromatography system effectively processed chlorophyll-containing plant extract solution with a recovery rate of 33.8 %, obviating the need for concentration steps. Subsequently, an offline two-dimensional RPLC × SFC employing only the phenyl/tetrazole stationary phase achieved a remarkable 96.38 % orthogonality and was established and utilized in the preparative separation and purification of natural products. Finally, the constructed single stationary phase highly orthogonal RPLC × SFC system was successfully applied in the preparative separation and purification of natural diarylheptanoids from the Saxifraga tangutica target fraction and yielded four diarylheptanoids with purities exceeding 95 %.

Supercritical fluid chromatographic chiral separation of potential P2RX7 antagonists containing one, two and three chiral centers

Eleven polysaccharide-based chiral stationary phases were screened to separate stereoisomers of six lactam derivatives by supercritical fluid chromatography (SFC). Those molecules are antagonists of the P2×7 receptor with potential anti-inflammatory activity. They present a mixture of either two enantiomers, or four or eight stereoisomers depending on the number of chiral centers in their structure. The effect of chiral stationary phase, either amylose- or cellulose-based, coated or immobilized, chlorinated or non-chlorinated, on retention and selectivity of those compounds was studied. The effect of the co-solvent nature (methanol, ethanol, propan-2-ol and acetonitrile) and percentage (15 to 40%), temperature (20 to 45°C) and backpressure (8 to 20 MPa) on the enantioseparation and retention of 1-(2-chlorobenzyl)-5-((4-methoxyphenyl)amino)pyrrolidin-2-one (compound 4) was thoroughly studied. Thus, optimal conditions were defined for each derivative in order to implement the preparative separation of the whole series, except of 1-((3,4-dimethoxyphenyl)(phenyl)methyl)-5-oxo-N-(1-phenylethyl)pyrrolidine-2-carboxamide) (compound 6) for which none of the eleven columns could resolve the eight stereoisomers. The small-scale preparative separation of the enantiomers of the most promising derivative, i.e 3-acetyl-1-(4-chlorophenyl)-N-(2,4-dichlorobenzyl)-5-oxopyrrolidine-2-carboxamide (compound 2), is presented.

Stereoisomer separation of drugs and biomarkers using supercritical fluid chromatography to support PK/PD studies

Stereoisomer separation of drugs and biomarkers using supercritical fluid chromatography to support PK/PD studies

Separation Methods of Phenolic Compounds from Plant Extract as Antioxidant Agents Candidate.

In recent years, discovering new drug candidates has become a top priority in research. Natural products have proven to be a promising source for such discoveries as many researchers have successfully isolated bioactive compounds with various activities that show potential as drug candidates. Among these compounds, phenolic compounds have been frequently isolated due to their many biological activities, including their role as antioxidants, making them candidates for treating diseases related to oxidative stress. The isolation method is essential, and researchers have sought to find effective procedures that maximize the purity and yield of bioactive compounds. This review aims to provide information on the isolation or separation methods for phenolic compounds with antioxidant activities using column chromatography, medium-pressure liquid chromatography, high-performance liquid chromatography, counter-current chromatography, hydrophilic interaction chromatography, supercritical fluid chromatography, molecularly imprinted technologies, and high-performance thin layer chromatography. For isolation or purification, the molecularly imprinted technologies represent a more accessible and more efficient procedure because they can be applied directly to the extract to reduce the complicated isolation process. However, it still requires further development and refinement.

Chiral π-Conjugated Double Helical Aminyl Diradical with the Triplet Ground State.

We report a neutral high-spin diradical of chiral C2-symmetric bis[5]diazahelicene with ΔEST ≈ 0.4 kcal mol-1, as determined by EPR spectroscopy/SQUID magnetometry. The diradical is the most persistent among all high-spin aminyl radicals reported to date by a factor of 20, with a half-life of up to 6 days in 2-MeTHF at room temperature. Its triplet ground state and excellent persistence may be associated with the unique spin density distribution within the dihydrophenazine moiety, which characterizes two effective 3-electron C-N bonds analogous to the N-O bond of a nitroxide radical. The enantiomerically enriched (ee ≥ 94%) (MM)- and (PP)-enantiomers of the precursors to the diradicals are obtained by either preparative chiral supercritical fluid chromatography or resolution via functionalization with the chiral auxiliary of the C2-symmetric racemic tetraamine. The barrier for the racemization of the solid tetraamine is ΔG‡ = 43 ± 0.01 kcal mol-1 in the 483-523 K range. The experimentally estimated lower limit of the barrier for the racemization of a diradical, ΔG‡ ≥ 26 kcal mol-1 in 2-MeTHF at 293 K, is comparable to the DFT-determined barrier of ΔG‡ = 31 kcal mol-1 in the gas phase at 298 K. While the enantiomerically pure tetraamine displays strong chiroptical properties, with anisotropy factor |g| = |Δε|/ε = 0.036 at 376 nm, |g| ≈ 0.005 at 548 nm of the high-spin diradical is comparable to that recently reported triplet ground-state diradical dication. Notably, the radical anion intermediate in the generation of diradical exhibits a large SOMO-HOMO inversion, SHI = 35 kcal mol-1.

Fluid revisited: An overlook of a method for solubility measurements in supercritical fluids based on chromatography retention

Measuring solubility in supercritical fluids usually represents a technical challenge since it is a highly compressible media sensitive to sampling and processing. Several decades ago, a chromatographic method for measuring solubility in supercritical fluids was presented by Bartle et al based on a linear relationship between solubility and inverse retention coefficient in supercritical fluid chromatography. Despite clear advantages such as high productivity and simplicity of sample preparation the method received only a limited acceptance in the field. In this work, the method was re-evaluated using several model compounds and stationary phases in supercritical fluid chromatography in conditions close to the limits of method applicability. Effects of calibration approaches, flowrates, initial calibration data and chromatography sample solvents were tested. The method appeared to be surprisingly robust and reasonably precise even for compounds which do not fully comply with the requirements for method applicability. It could be considered as an express method of choice when large sets of solubility data at different pressures are required.

Analysis of vitamin D and its metabolites in biological samples – Part I: Optimization and comparison of UHPSFC-MS/MS and UHPLC-MS/MS methods

Fat-soluble vitamin D is an essential bioactive compound important for human health. Insufficient vitamin D levels can result not only in bone disease but also in other disorders, such as cancer, metabolic disorders, and diseases related to poor immune function. The current methods commonly used for vitamin D analysis are often applied to determine the levels of the most abundant metabolite in plasma, i.e., 25-OH-D2/D3. These methods do not consider the presence of other hydroxylated and esterified metabolites, including isomers and epimers, which are typically found in low concentrations.In this study, we developed a fast and selective ultra-high performance supercritical fluid chromatography (UHPSFC) method using a 150 mm long 1-amino anthracene (1-AA) column and a mobile phase consisting of carbon dioxide and methanol/isopropanol (1/1, v/v) mixed with 8 % water. After thorough optimization of column temperature and back pressure, the separation of four vitamin D3 esters, vitamin D3 and D2, and eight mono- and di-hydroxylated metabolites, including three groups of isomers, was achieved in 10 min. Two ion sources, atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization optimized within this study, were compared in tandem mass spectrometry (MS/MS) detection. No significant sensitivity differences were observed. Subsequently, the same 1-AA column chemistry was examined in ultra-high performance liquid chromatography (UHPLC) as the stationary phase that could hypothetically bring different selectivity in the separation of vitamin D and its metabolites. However, this hypothesis was rejected, and C18 was used as a stationary phase in the final optimized UHPLC-MS/MS method. Despite detailed optimization, the final 15 min UHPLC method was not able to separate di-hydroxylated isomers of vitamin D3, while it enabled better resolution of esterified forms compared to UHPSFC.Optimized methods provided similar repeatability of retention times and peak areas, with RSD < 2 % and 10 %, respectively. The lowest limits of quantification were in the range of 1.2 – 4.9 ng/mL for UHPSFC-APCI-MS/MS, while for UHPLC-APCI-MS/MS, they were typically in the range of 2.6 – 9.6 ng/mL. Based on the obtained results, the UHPSFC-APCI-MS/MS method was the most promising approach for fast, selective, and sensitive analysis that could be applied in the analysis of biological samples with emphasis on the separation of both hydroxylated and esterified metabolites, including isomeric forms.

A nitrogenous heterocyclic ring-bonded stationary phase for separating alkaloids in supercritical fluid chromatography

A novel silica stationary phase was designed and prepared through thiol-epoxy click chemistry for supercritical fluid chromatography (SFC). The developed stationary phase was characterized by elemental analysis, Fourier transform infrared spectrometry and solid-state 13C/CP MAS NMR spectroscopy. In order to evaluate the chromatographic performance and retention mechanisms of the prepared column, a variety of alkaloids were used, including indoles, isoquinolines, pyrrolidines, piperidines, quinolizidines and organic amines. The stationary phase showed more symmetrical peak shapes and better performance for these compounds compared to the conventional SFC stationary phases. The investigations on the effects of pressure and temperature on retention provided information that the selectivity of the compounds can be improved by changing the density of the supercritical fluids. Moreover, it shows improved separation efficiency of three natural products with alkaloids as the main components at high sample loading. In conclusion, the developed stationary phase could offer flexible selectivity toward alkaloids and complex samples.

Analysis of vitamin D and its metabolites in biological samples – Part II: Optimization of a sample preparation method for liver tissue

Extraction of vitamin D, including its hydroxylated and esterified metabolites, from soft tissues such as the liver is challenging due to the lipophilic character of matrix and analytes that are expected in very low concentration levels.In this study, we aimed at the optimization of two-step extraction using solid–liquid extraction as the first step, followed by solid-phase extraction. Various solvents, including ethanol, acetonitrile, methanol, acetone, heptane, and heptane with isopropanol, were investigated to isolate vitamin D compounds from liver tissue in the first step. Acetone was finally selected as the most suitable solvent for the solid–liquid extraction, with the highest recovery in the range of 67 – 98% for polar hydroxylated forms and 3 – 28% for lipophilic vitamin D and esters. Two solid phase extraction (SPE) based on the (i) “bind and elute strategy” and (ii) “removal strategy” using hydrophilic-lipophilic balanced SPE sorbent were optimized as a proceeding step for acetone extracts to increase the method selectivity. Finally, two optimized methods, combining solid–liquid extraction and individual SPE strategy, were examined in terms of sensitivity, recovery, matrix effect, accuracy, and precision.The limits of quantification were in the range of 1 – 10 ng/mL and 3 – 20 ng/mL analyzed by ultra-high performance supercritical fluid chromatography and ultra-high performance liquid chromatography hyphenated a with tandem mass spectrometer, respectively. The absolute recovery determined for the “bind and elute strategy” protocol was in the range of 3 – 24 %. Nevertheless, this method was free of matrix effects, which were determined to be in the 73 – 120 % range. On the contrary, the “removal strategy” approach provided higher recovery values for all compounds (47 – 123 %), but the results for nonpolar vitamin D and esters were strongly affected by signal suppression (matrix effects 3 – 51 %). Both methods fulfilled the criteria for accuracy and precision requested by the European Medicine Agency Guideline on Bioanalysis.“Removal strategy” SPE with decreased manual intervention and lower solvent consumption was finally applied to mouse liver tissue to determine vitamin D and its hydroxylated and esterified metabolites for the first time. The results, i.e., vitamin D esters detected in liver tissue, supported the notion that esters of vitamin D can be stored in lipophilic tissues to release vitamin D.

Recent Advances in Supercritical Fluid Chromatography

Recent Advances in Supercritical Fluid Chromatography

Discrimination of plastic waste pyrolysis oil feedstocks using supercritical fluid chromatography

Advanced chemical recycling techniques provide new avenues for handling and recycling mixed plastic waste; pyrolysis is a prominent approach involving heating plastic waste in an oxygen-free environment to create pyrolysis oils. Pyrolysis oils must be thoroughly characterized before being refined into fuels and chemical feedstocks. Here, a method based on supercritical fluid chromatography with ultraviolet detection was developed to analyze plastic waste pyrolysis oils. Multiple stationary phases were examined, and 2-ethyl pyridine was chosen as the best stationary phase for resolving pyrolysis oil components. Different standards and different plastic waste pyrolysis oils were compared across the different stationary phases. Up to three columns were serially coupled to increase efficiency and column capacity. It was found that a general method using ethanol as a modifier and two 2-ethyl pyridine columns could effectively resolve plastic waste pyrolysis oils. The potential for differentiating polyethylene and polypropylene feedstocks was demonstrated using principal component analysis.

Integrative Multimodal Metabolomics to Early Predict Cognitive Decline Among Amyloid Positive Community-Dwelling Older Adults.

Alzheimer's disease is strongly linked to metabolic abnormalities. We aimed to distinguish amyloid-positive people who progressed to cognitive decline from those who remained cognitively intact. We performed untargeted metabolomics of blood samples from amyloid-positive individuals, before any sign of cognitive decline, to distinguish individuals who progressed to cognitive decline from those who remained cognitively intact. A plasma-derived metabolite signature was developed from Supercritical Fluid chromatography coupled with high-resolution mass spectrometry (SFC-HRMS) and nuclear magnetic resonance (NMR) metabolomics. The 2 metabolomics data sets were analyzed by Data Integration Analysis for Biomarker discovery using Latent approaches for Omics studies (DIABLO), to identify a minimum set of metabolites that could describe cognitive decline status. NMR or SFC-HRMS data alone cannot predict cognitive decline. However, among the 320 metabolites identified, a statistical method that integrated the 2 data sets enabled the identification of a minimal signature of 9 metabolites (3-hydroxybutyrate, citrate, succinate, acetone, methionine, glucose, serine, sphingomyelin d18:1/C26:0 and triglyceride C48:3) with a statistically significant ability to predict cognitive decline more than 3 years before decline. This metabolic fingerprint obtained during this exploratory study may help to predict amyloid-positive individuals who will develop cognitive decline. Due to the high prevalence of brain amyloid-positivity in older adults, identifying adults who will have cognitive decline will enable the development of personalized and early interventions.

Supercritical fluid chromatography with fluorescence detection for tocochromanol profiling in oils and seed ethanol extracts: A comparative study with NPLC

This study focused on the development of a method designed to simultaneously separate four tocopherol (T), four tocotrienol (T3) homologues and plastochromanol-8 (PC-8) using supercritical fluid chromatography (SFC) with fluorescence detection (FLD). We examined the selectivity and resolution behaviour of tocochromanols on eight different stationary phases and investigated the retention factor of PC-8 (kPC-8) as a function of mobile phase composition, as well as the injection volume’s impact on peak shape. The final SFC-FLD method developed involved a separation with two amino (NH2) columns connected in series (4.6 mm ID; 3 μm dp, 150 mm and 250 mm in length, respectively), at a flow rate of 2.5 mL/min, thermostated at 40 °C and a back-pressure regulator value of 10.0 MPa, injection volume of 10 μL and a gradient comprising of A:CO2 and B:MeOH. The sensitivity of SFC-DAD, SFC-FLD, NPLC-DAD and NPLC-FLD were compared and found to be 58.6–160.9, 5.9–51.9, 19.7–63.5 and 0.42–4.3 pmol, respectively. The SFC-FLD method developed was successfully applied to the analysis of seed ethanol extracts and plant oils and found to be suitable for the routine analysis. Furthermore, the SFC approach serves as a sustainable alternative compared to NPLC, due to the reduced human and environmental exposure and consumption of hazardous solvents.

Chiral separation of terbutaline by supercritical fluid chromatography with peak purity determination by UPLC–MS and modeling for chiral recognition mechanism

AbstractBACKGROUNDTerbutaline is the drug of choice for asthma patients but it exists in racemic mixture. (R)‐(−)‐terbutaline is 200 times more active than (S)‐(+)‐terbutaline yet it is not advisable to prescribe racemic mixture due to certain adverse effects of (S)‐(+)‐terbutaline. Therefore, a fast, effective and reproducible separation method is necessary.RESULTSChiral separation was achieved on Chiralpak‐IE and Chiralpak‐IG columns (250 × 4.6 mm, 5 μm) using carbon dioxide‐methanol (CO2‐MeOH, 60:40) with a 0.2% triethylamine mobile phase. The flow was 1.0 mL min−1 with detection at 223 nm using a photodiode array (PDA) detector. The values of retention, separation and resolution factors were in the ranges 1.88–2.38, 1.14–1.26 and 0.91–1.17, respectively; with best separation with Chiralpak‐IE. The tailing factors and number of theoretical plates were in the range of 1.0–1.23 and 487–3699. The purity of the separated peaks was determined by ultra‐performance liquid chromatography–mass spectrometry (UPLC–MS); indicating 100% purity of the peaks. The chiral recognition was determined by modeling with binding affinities −5.0 and −6.0 for S‐ and R‐enantiomers, respectively; indicating S‐enantiomer elution first followed by R‐enantiomers. The major forces responsible for the chiral resolution were hydrogen bonding and π‐π interactions.CONCLUSIONOwing to the great demand for optically active pure drugs and high economic pressure on analytical techniques, the chiral separation of terbutaline was achieved via inexpensive supercritical fluid chromatography. The reported method may be used to prepare optically active pure terbutaline drugs (R‐enantiomers) at a pilot scale. © 2024 Society of Chemical Industry (SCI).

Retention modeling of therapeutic peptides in sub‐/supercritical fluid chromatography

AbstractChromatographic modeling software packages are valuable tools during method optimization steps. These are well established for reversed‐phase applications utilizing retention time (RT) prediction to optimize separations and receive robust methods, which is of high interest for the analysis of pharmaceuticals. In contrast to liquid chromatography, the knowledge of RT prediction in supercritical fluid chromatography is limited to a manageable number of studies.This study uses the software DryLab to predict the RTs of the peptides bacitracin (Bac), colistin, tyrothricin (Tyro), and insulin analogs. Gradient time, column temperature, and the ternary composition (terC) of carbon dioxide, methanol (MeOH), and acetonitrile (ACN) in the gradient elution are varied in a feasibility approach using a neutral (Viridis BEH) and an amino‐derivatized aromatic (Torus 2‐PIC) stationary phase. In the second part, chromatographic optimization is performed in silico through gradient adjustments to optimize the separation of the fingerprint of Bac. The final gradient method utilizes a Viridis BEH column (100 × 3.0 mm, 1.7 μm), carbon dioxide, and a modifier consisting of ACN/MeOH/water/methanesulfonic acid (60:40:2:0.1, v:v:v:v). In addition, changes in the retention order of Tyro compounds with the proportion of the terC in combination with a Torus Diol column are investigated.

Ultrahigh-Performance Supercritical Fluid Chromatography-Multimodal Ionization-Tandem Mass Spectrometry as a Universal Tool for the Analysis of Small Molecules in Complex Plant Extracts.

Complex analysis of plant extracts usually requires a combination of several analytical approaches. Therefore, in this study, we developed a holistic two-injection approach for plant extract analysis, which is carried out within one instrument without the need for any manual intervention during the analysis. Ultrahigh-performance supercritical fluid chromatography (UHPSFC) was employed for the analysis of 17 volatile terpenes on a porous graphitic carbon column within 7.5 min, followed by analysis on short diol column where flavonoids, phenolic acids, and terpenoic acids were analyzed within 15.5 min. A multimodal ionization source combining electrospray and atmospheric pressure chemical ionization (ESCi) was selected for mass spectrometry detection as a simultaneous ionization of both lipophilic and polar compounds was required. The quantitative aspects of the final UHPSFC-ESI/ESCi-MS/MS two-injection approach were determined, and it was applied to the analysis of Eucalyptus sp. extracts prepared by supercritical fluid extraction. Current methods reported in the literature typically require a labor-intensive combination of liquid and gas chromatography for the complex analysis of plant extracts. We present for the first time a new UHPSFC approach requiring only a single instrument that provides an alternative approach to the analysis of complex plant extracts.

HPLC and SFC Enantioseparation of (±)-Trans-β-Lactam Ureas on Immobilized Polysaccharide-Based Chiral Stationary Phases—The Introduction of Dimethyl Carbonate as an Organic Modifier in SFC

A series of nine racemic trans-β-lactam ureas were analyzed for enantiomer separation by high-performance liquid chromatography (HPLC) and supercritical fluid chromatography (SFC). The separations were performed on three immobilized polysaccharide-based chiral analytical columns (CHIRAL ART Amylose-SA, CHIRAL ART Cellulose-SB and CHIRAL ART Cellulose-SC). In HPLC mode, a normal-phase consisting of n-hexane/2-PrOH (90/10, v/v), a polar organic mobile phase consisting of 100% MeOH or 100% EtOH, and a non-standard mobile phase consisting of 100% dimethyl carbonate (DMC) were investigated. In SFC mode, the mobile phases CO2/alcohol (80/20, v/v) and CO2/DMC/alcohol (MeOH or EtOH; 70/24/6, v/v/v or 60/32/8, v/v/v) were investigated. The best achieved enantioseparation of trans-β-lactam ureas was obtained with an Amylose-SA column. We have shown that the green solvent dimethyl carbonate (DMC) can be efficiently used as a mobile phase in HPLC mode as well as in SFC mode along with the addition of polar organic modifiers (MeOH or EtOH).

ICH Q14-inspired novel approach to establish an SFC-based purity method for carbamazepine.

The proposed ICH Q14 guideline "Analytical procedure development" describes science and risk-based approaches for development and maintenance of analytical procedures suitable for the assessment of the quality of drug substances and drug products. As a case study, the systematic development and validation of a supercritical fluid chromatography (SFC)-based purity method for carbamazepine is presented. Systematic analytical quality by design (AQbD) principles were applied using the software package Fusion QbD to the method development approach. The relationship between chromatographic parameters and the responses of interest were examined to improve the reliability of the method by understanding, reducing, and controlling sources of variability. Method performance qualification in terms of method robustness was finally carried out with the parameters that were classified as critical after method development and a validation study met previously set acceptance criteria. The developed SFC purity method for carbamazepine demonstrated readiness as a viable alternative to the official HPLC method published in the Ph.Eur. with improved peak resolution, improved peak symmetry, and faster analysis times (3min vs. 80 min for the official method). Its inherent reliability illustrates the superiority of AQbD in method development and application for drug quality assurance.

Synthesis and evaluation of aromatic stationary phases based on linear solvation energy relationship model for expanded application in supercritical fluid chromatography

In the last decade, the separation application based on aromatic stationary phases has been demonstrated in supercritical fluid chromatography (SFC). In this paper, four aromatic stationary phases involving aniline (S-aniline), 1-aminonaphthalene (S-1-ami-naph), 1-aminoanthracene (S-1-ami-anth) and 1-aminopyrene (S-1-ami-py) were synthesized based on full porous particles (FPP) silica, which were not end-capped for providing extra electrostatic interaction. Retention mechanism of these phases in SFC was investigated using a linear solvation energy relationship (LSER) model. The aromatic stationary phases with five positive parameters (a, b, s, e and d+) can provide hydrogen bonding, π-π, dipole-dipole and cation exchange interactions, which belong to the moderate polar phases. The LSER results obtained using routine test solutes demonstrated that the aforementioned interactions of four aromatic stationary phases were influenced by the type and bonding density of the ligand, but to a certain extent. Furthermore, the LSER data verified that the S-1-ami-anth column based on full porous particles silica had higher cation exchange capacity (d+ value), compared to the commercialized 1-AA column (based on the ethylene-bridged hybrid particles). The relationship between the d+ value and SFC additive was quantitatively proved so as to regulate electrostatic interaction reasonably. This value was greatly increased by phosphoric acid, slightly increased by trifluoroacetic acid and formic acid, but significantly reduced by ammonium formate and diethylamine. Taking the S-1-ami-naph column as an example, better peek shape of the flavonoids was obtained after the addition of 0.1 % phosphoric acid in MeOH while isoquinoline alkaloids were eluted successfully within 11 min after adding 0.1 % diethylamine in MeOH. Combined with the unique π-π interaction and controllable electrostatic interaction, the aromatic stationary phases in this study have been proven to have expandable application potential in SFC separation.