Sum Frequency Generation Research Articles

Vibrational sum frequency generation (VSFG) spectroscopy of water adsorption on surfaces of yttria-stabilized cubic zirconia (YSZ).

Yttria-stabilized zirconia (YSZ) is found in a wide range of applications, from solid-oxide fuel cells to medical devices and implants. A molecular-level understanding of the hydration of YSZ surfaces is essential for optimizing its performance and durability in these applications. Nevertheless, only a limited amount of literature is available about the surface hydration of YSZ single crystals. In this study, we employ surface-sensitive non-linear vibrational sum frequency generation spectroscopy to investigate the hydration of YSZ(100), (110), and (111) single crystal substrates under ambient laboratory conditions. Three types of hydroxyl groups were identified at all three YSZ-D2O interfaces: (i) hydroxyls on the metal sites of Zr or Y resulting from the dissociative chemisorption of water, (ii) hydroxyls from proton adsorption to O sites formed from water dissociation, and (iii) hydroxyl groups as part of the physisorbed water at the interface.

Heralded pure single-photon sources using nanophotonic waveguides with quadratic and cubic nonlinearities

This paper presents, to our knowledge, a new approach in developing integrated pure heralded single-photon sources based on the interplay between the spontaneous four-wave mixing and sum-frequency generation parametric processes. We introduce a comprehensive quantum model to exploit this interplay in AlGaAs and LiNbO3 nanophotonic waveguides. The developed model is used to assess the performance of the sources based on the photon-pair generation and the associated spectral purity. We find that this approach can remarkably improve the spectral purity of low-pure generated photon pairs, relaxing the restrictions on the structure design and the used pump wavelength. In addition, it overcomes the current hurdles in implementing on-chip photon detectors operating at room temperature, paving the way for advanced applications in integrated quantum photonics and information processing.

3D hydrogen-like screening effect on excitons in hBN-encapsulated monolayer transition metal dichalcogenides

We observe both s-series and p-series excitons by using sum frequency generation spectroscopy on monolayer (1L-)MX2 (M = Mo, W, X = S, Se) encapsulated by hexagonal boron nitride (hBN). Moreover, we perform numerical calculations with the Rytova-Keldysh potential and obtain the relative dielectric constant of hBN among other parameters. The obtained relative dielectric constant can be approximated by the high-frequency limit of the infrared dispersion even though the exciton binding energies are almost on the phonon resonances in hBN. This suggests that the theoretically indicated modification of the exciton level structure due to the phonon resonances is negligible. The power-law scaling of exciton binding energies indicates that dielectric screening of 1L-MX2 exciton levels other than 1s can be approximated by that of a 3D hydrogen model with the dielectric constant of hBN.

A biomimetic approach towards a universal slippery liquid infused surface coating.

One biomimetic approach to surface passivation involves a series of surface coatings based on the slick surfaces of carnivorous pitcher plants (Nepenthes), termed slippery liquid-infused porous surfaces (SLIPS). This study introduces a simplified method to produce SLIPS using a polydopamine (PDA) anchor layer, inspired by mussel adhesion. SLIPS layers were formed on cyclic olefin copolymer, silicon, and stainless steel substrates, by first growing a PDA film on each substrate. This was followed by a hydrophobic liquid anchor layer created by functionalizing the PDA film with a fluorinated thiol. Finally, perfluorodecalin was applied to the surface immediately prior to use. These biomimetic surface functionalization steps were confirmed by several complimentary surface analysis techniques. The wettability of each surface was probed with water contact angle measurements, while the chemical composition of the layer was determined by X-ray photoelectron spectroscopy. Finally, ordering of specific chemical groups within our PDA SLIPS layer was determined via sum frequency generation spectroscopy. The hemocompatibility of our new PDA-based SLIPS coating was then evaluated by tracking FXII activation, fibrin generation time, clot morphology, and platelet adhesion to the surface. This hemocompatibility work suggests that PDA SLIPS coatings slow or prevent clotting, but the observation of both FXII activation and the presence of adherent and activated platelets at the PDA SLIPS samples imply that this formulation of a SLIPS coating is not completely omniphobic.

Probing photochemical dynamics using electronic vs vibrational sum-frequency spectroscopy: The case of the hydrated electron at the water/air interface.

Photo-dynamics can proceed differently at the water/air interface compared to in the respective bulk phases. Second-order non-linear spectroscopy is capable of selectively probing the dynamics of species in such an environment. However, certain conclusions drawn from vibrational and electronic sum-frequency generation spectroscopies do not agree as is the case for the formation and structure of hydrated electrons at the interface. This Perspective aims to highlight these apparent discrepancies, how they can be reconciled, suggests how the two techniques complement one another, and outline the value of performing both techniques on the same system.

Quadratic Cascading in Quasi-Phase-Matching: An Alternative Route to Efficient Third-Harmonic Generation

We report on the theoretical/numerical investigation of simultaneous second- and third-harmonic generation from a single wavelength input in quasi-phase-matched crystals. The presented technique consists of a quadratic crystal with two first-order quasi-phase-matched sections: one designed for quasi-phase-matching to second-harmonic generation and the other for quasi-phase-matching to third-harmonic generation via sum-frequency generation. We identify an optimal length ratio (optimal number of domains) for these sections in order to enhance the conversion to the third harmonic, achieving nearly complete energy transfer. The advantages of the method are demonstrated both numerically and analytically, with a specific example using periodically poled lithium niobate. Quadratic cascading with quasi-phase-matching proves to be an effective approach for achieving cubic-like effects with high conversion efficiencies.

Orientational Disorder of Alcohol Molecules at Their Solution Surfaces in Low Concentration Range: A Molecular Dynamics Simulation Study.

Molecular dynamics (MD) simulations of short-chain alcohols (methanol, ethanol, and 1-propanol) in solution were carried out to examine the orientational disordering (randomizing) of alcohol molecules at the surface under diluted conditions. Recent vibrational sum frequency generation (VSFG) spectroscopy, combined with photoelectron spectroscopy, has successfully measured the disordering structure at low concentrations. The present MD simulations accurately reproduce this observation for the first time. To ensure reliable results through MD simulations, several widely used force field models for water and alcohol, including polarizable models, were examined. This examination involved a comparison of structural and thermodynamic quantities, such as surface density times orientation and surface excess concentration, which were obtained through surface-specific measurements like VSFG spectroscopy and surface tension measurements. It is found that the width of the density profile for alcohol molecules at the surface, along the surface normal, increases as the concentration decreases in the diluted condition, which is consistent with the results obtained from the previous neutron and X-ray grazing incidence reflection experiments. A molecular mechanism explaining the disordering of alcohol molecules with decreasing concentration is also discussed.

Chirality-controlled second-order nonlinear frequency conversion in lithium niobate film metasurfaces.

The high-quality factor resonant metasurfaces have extensive applications in enhancing nonlinear frequency conversion efficiency at the subwavelength scale. However, methods for actively modulating the frequency conversion process are limited. We design a chiral lithium niobate film metasurface and investigate the photonic spin as a new degree of freedom to dynamically control the second-order nonlinear frequency conversion, without reconfiguring the structure by using external stimuli. The chiral resonance with circular dichroism (CD) of 0.62 gives rise to a high nonlinear CD of 0.84 in second-harmonic generation efficiency. Interestingly, combining the chiral resonance and an achiral quasi-bound state in the continuum enables us to investigate the photonic-spin-controlled sum-frequency generation and the photon pair generation from the spontaneous parametric downconversion process. Owing to the ultrahigh quality factor exceeding 103 both for two resonances, the second-order nonlinear frequency conversion occurs at a wavelength region of 0.2 nm, suggesting good monochromaticity. Our work opens new, to our knowledge, avenues for practical implementation of dynamically controlled nonlinear optical devices and will find utility in holography, switchable light sources, and information processing.

On the mechanism for work function change of gold electrodes by ultrathin polyethyleneimine (PEI) films: Effect of molecular order.

Polyethyleneimine (PEI) is a widely used cationic polyelectrolyte. In organic electronics, it is a universal surface modifier for shifting the electrode work function (Φ) and improving charge injection into electronic devices. This effect may depend on the conformation and dipolar order of the PEI ultrathin film, but their detailed experimental evaluation has not yet been reported. Thus, we used sum-frequency generation (SFG) spectroscopy to probe the net orientation of polar groups of PEI films on glass and gold. The films were fabricated by spin-coating from alcoholic solutions or by dip-coating from aqueous solutions of various pH values, with both branched (b-PEI) and linear (l-PEI) structures. The obtained SFG spectra and atomic force microscopy (AFM) images indicated that the conformational ordering of the PEI layers increases over the period of 14 days after fabrication, being slightly more pronounced for l-PEI vs b-PEI, and for dip-coating vs spin coating fabrication. Furthermore, both the pH of the dip-coating solutions and the substrate nature influence the final morphology and order of the adsorbed films. On glass, they are optimized at an intermediate pH 5, while on gold, the greatest homogeneity is observed at pH 2 and the largest dipolar order is observed at pH 10. The pH dependence of changes in the work function of gold by PEI (|ΔΦ|) suggests that the electronic contribution is dominant. Nevertheless, the evolution of the PEI dipolar ordering was accompanied by small variations of |ΔΦ|, suggesting that it does have a significant contribution, especially at conditions for which the electronic contribution is reduced.

Impact of electrolyte on the structure and orientation of water at air/water-polyethylene glycol polymer interface.

Polyethylene glycol (PEG) is a water soluble, non-ionic polymer with applications in drug delivery, protein precipitation, anti-biofouling, water-splitting, Li-ion batteries, and fuel cells. The interaction of PEG with water and electrolytes plays pivotal roles in such applications. Using interface-selective spectroscopy, heterodyne-detected vibrational sum frequency generation, and Raman difference spectroscopy with simultaneous curve fitting analysis, we show that water adopts different structures and orientations at the air/water-PEG interface, which depends on the molar mass of the PEG. At the air/water-PEG4000 (MW 4000u) interface, water is H-up oriented (i.e., water Hs are pointed away from the aqueous bulk) around 3200cm-1 and H-down oriented (i.e., water Hs are pointed toward the aqueous bulk) around 3470cm-1. Variation of the bulk concentration of PEG4000 does not change the dual orientation of interfacial water. The presence of an electrolyte (1.0M NaCl) selectively reduces the H-up oriented water without affecting the H-down oriented water at the air/water-PEG4000 interface. The selective reorganization of the interfacial water is assigned to the disruption of the asymmetric hydration around ether-oxygen of the surface-adsorbed PEG4000 by the Na+ ion of the electrolyte. Interestingly, in the case of low molar mass PEG (air/water-PEG200), the interfacial water neither shows the dual orientation nor is affected by 1.0M NaCl.

Addressing molecular geometry on dense gold nanoparticle substrates by two-colour sum-frequency generation spectroscopy combined with DFT calculations

Addressing molecular geometry on dense gold nanoparticle substrates by two-colour sum-frequency generation spectroscopy combined with DFT calculations

In-plane orientational motions of the functional groups of molecules at the air/water interface by time-resolved vibrational sum frequency generation.

The movements of molecules at interfaces and surfaces are restricted by their asymmetric environments, leading to anisotropic orientational motions. In this work, in-plane orientational motions of the -C=O and -CF3 groups of coumarin 153 (C153) at the air/water interface were measured using time-resolved (TR) vibrational sum frequency generation (SFG). The in-plane orientational time constants of the -C=O and -CF3 groups of C153 are found to be 41.5 ± 8.2 and 36.0 ± 4.5ps. These values are over five-times faster than that of 198 ± 15ps for the permanent dipole of the whole C153molecule at the interface, which may indicate that the two groups experience different interfacial friction in the plane. These differences could also be the result of the permanent dipole of C153 being almost five times those of the -C=O and -CF3 groups. The difference in orientational motions reveals the microscopic heterogeneous environment that molecules experience at the interface. While the interfacial dynamics of the two functional groups are similar, our TR-SFG experiments allowed the quantification of the in-plane dynamics of individual functional groups for the first time. Our experimental findings about the interfacial molecular motion have implications for molecular rotations, energy transfer, and charge transfer at material interfaces, photocatalysis interfaces, and biological cell/membrane aqueous interfaces.

Investigating the self-assembly of pH-sensitive switchable diamine surfactant using sum frequency generation spectroscopy and molecular dynamics simulations.

The responses of the N-alkyl diamine groups to variations in pH affect their conformations and surface activities, making them relevant to applications relying on interfacial interactions, such as controlled emulsification and mineral flotation. An in-depth understanding of interfacial self-assembly is crucial. Herein, a molecular-level study was performed to investigate the adsorption and self-assembly of N-dodecylpropane-1,3-diamine (DPDA) at the air-water (A/W) interface using sum frequency generation (SFG) spectroscopy and molecular dynamics (MD) simulations. The SFG spectra of DPDA, acquired under three pH conditions, suggest that the protonation of the DPDA diamine group influences the alkyl chain arrangement at a varying degree at the A/W interface. Analysis of the di-cationic DPDA SFG spectrum at a low pH showed fewer gauche defects at low concentration, as indicated by the relatively higher intensity ratio (ICH3SS/ICH2SS) of 18.1 ± 0.6. The density profiles from MD simulations at different surface areas per molecule and pH conditions, showing varying degrees of packing, support the observation of gauche defects in SFG. With MD simulation, the radial distribution factor for di-cationic species has the highest probability of forming hydrogen bonds compared to mono-cationic and non-ionic species. These g(r) probability results conform with observations obtained from SFG spectroscopy, where we observed a strong hydrogen bond interaction at low pH conditions with di-cationic species, forming tetrahedrally arranged water molecules at the A/W interface. Overall, comprehensive insights will facilitate the visualization of alkyl diamines and their potential derivatives at the A/W interface, enabling a better understanding of their behavior across various applications.

Hierarchical ion interactions in the direct air capture of CO2 at air/aqueous interfaces.

The direct air capture (DAC) of CO2 using aqueous solvents is plagued by slow kinetics and interfacial barriers that limit effectiveness in combating climate change. Functionalizing air/aqueous surfaces with charged amphiphiles shows promise in accelerating DAC; however, insight into these interfaces and how they evolve in time remains poorly understood. Specifically, competitive ion interactions between DAC reagents and reaction products feedback onto the interfacial structure, thereby modulating interfacial chemical composition and overall function. In this work, we probe the role of glycine amino acid anions (Gly-), an effective CO2 capture reagent, that promotes the organization of cationic oligomers at air/aqueous interfaces. These surfaces are probed with vibrational sum frequency generation spectroscopy and molecular dynamics simulations. Our findings demonstrate that the competition for surface sites between Gly- and captured carbonaceous anions (HCO3-, CO32-, carbamates) drives changes in surface hydration, which in turn tunes oligomer ordering. This phenomenon is related to a hierarchical ordering of anions at the surface that are electrostatically attracted to the surface and their ability to compete for interfacial water. These results point to new ways to tune interfaces for DAC via stratification of ions based on relative surface propensities and specific ion effects.

Extracting the Heterogeneous 3D Structure of Molecular Films Using Higher Dimensional SFG Microscopy.

Ultrathin molecular films are widespread in both natural and industrial settings, where details of the molecular structure such as density, out-of-plane tilt angles, and in-plane directionality determine their physicochemical properties. Many of these films possess important molecular-to-macroscopic heterogeneity in these structural parameters, which have traditionally been difficult to characterize. Here, we show how extending sum-frequency generation (SFG) microscopy measurements to higher dimensionality by azimuthal-scanning can extract the spatial variation in the three-dimensional molecular structure at an interface. We extend the commonly applied theoretical assumptions used to analyze SFG signals to the study of systems possessing in-plane anisotropy. This theoretical framework is then applied to a phase-separated mixed lipid monolayer to investigate the variation in molecular density and 3D orientation across the chirally packed lipid domains. The results show little variation in out-of-plane structure but a distinct micron-scale region at the domain boundaries with a reduction in both density and in-plane ordering.

Insights into the phase behavior at interfaces using vibrational sum frequency generation spectroscopy.

Phase separation is ubiquitous at the interface between two distinct phases. Physical transformation during phase separation often plays a crucial role in many important mechanisms, such as lipid phase separation, which is fundamental for transport through biological membranes. Phase separation can be complex, involving changes in the physical state and the reorganization of molecular structures, influencing the behavior and function of materials and biological systems. Surface-sensitive vibrational sum frequency generation (VSFG) spectroscopy provides a powerful tool for investigating these interfacial processes. As a non-linear optical technique, VSFG spectroscopy is sensitive to changes in molecular orientation and interactions at interfaces, making it an ideal method for studying phase separation processes. Here, we review the molecular interaction mechanisms underlying phase separation. We also explore the application of VSFG spectroscopy in studying phase separation processes at different interfaces. In particular, we focus on oil-water interfaces, which are relevant in environmental and industrial contexts; polymer and lipid surfaces, important for materials science and biological membranes; and intrinsically disordered protein systems, which play key roles in cellular function and disease.

Hydrolysis of phospholipid monolayers by phospholipase A2 revealed by heterodyne-detected sum frequency generation (HD-SFG) spectroscopy.

Phospholipase A2 (PLA2) catalyzes the hydrolysis of the sn-2 acyl ester linkage in phospholipid, producing lysophospholipid and fatty acid in the presence of Ca2+. The hydrolysis mediated by PLA2 has attracted much interest in various fields, such as pharmacy and biotechnology. It is recognized that PLA2 cannot hydrolyze phospholipid monolayers at high surface coverage. However, the origin of different PLA2 activities is not fully understood yet. The present study investigated the interaction between DPPC (16:0 PC) monolayer and PLA2 using heterodyne-detected sum frequency generation spectroscopy, which is interface-specific spectroscopy and highly sensitive to molecular symmetry based on a second-order nonlinear optical process. It was revealed that PLA2 adsorbs to the DPPC monolayer on the aqueous solution surface only when the surface coverage is low. The adsorption at the low surface coverage significantly changes the interfacial structures of PLA2 and the hydration, which are stabilized by the presence of Ca2+. Therefore, the restriction of the hydrolysis of phospholipid monolayers at high surface coverage can be rationalized by the inhabitation of the PLA2 adsorption. The present study deepens our molecular-level understanding of the hydrolysis of phospholipids by PLA2.

Imaging on surfaces with vibrational sum frequency generation microscopy

Nonlinear spectroscopy has been a valuable technique for probing surfaces for many decades. Still, in the recent past, nonlinear spectroscopy has become a useful tool for imaging monolayers on surfaces. This technique of nonlinear microscopy, more specifically sum frequency generation microscopy, provides both spectral and spatial information with varying resolution, allowing for the surface activity to be monitored and imaged. The following paper highlights the history, theory, and range of experimental advantages sum frequency generation imaging provides, focusing on specific experiments that put those advantages on display.

Orientation Distribution of Crystalline β-Sheet Domains in Bombyx mori Silk Fiber Studied with Vibrational Sum Frequency Generation Spectroscopy.

Silk fibers have good biocompatibility and mechanical properties, which make them attractive in biomaterial applications as well as textile industries. It is believed that the superior mechanical property is associated with the crystalline β-sheet structure in the fiber; but a deeper understanding of the structure-property relationship is still needed for full exploitation of its physical properties. Especially, accurate information on hydrogen-bonding interactions within β-sheet domains at the nanoscale and their spatial distributions at the mesoscale are critically needed. In this study, we demonstrate the selective detection of crystalline β-sheet domains in Bombyx mori silk fiber using sum frequency generation (SFG) spectroscopy and its use to determine the angular distribution of the β-sheet crystallites with respect to the fiber axis. Numerical simulations of the SFG signal of the amide-I band were carried out using tensors based on the B2 symmetry of the D2 point group and compared with experimental data. This comparison found that the crystalline β-sheet domains are aligned along the fiber axis with a standard deviation of ∼27° and parallel to the fiber surface with a standard deviation of ∼5°. It was also found that the amide bands in the SFG spectra cannot be fully explained with the assumption that the crystalline β-sheet vibrations can be described with the D2 point group. Being able to monitor the amide group vibrations sensitive to both interchain hydrogen bonding and crystallite orientations, SFG analysis has a potential to unveil the structure-mechanical property relationship that may not be readily assessable with other characterization techniques.

A simplified method for theoretical sum frequency generation spectroscopy calculation and interpretation: The "pop model".

Existing methods to compute theoretical spectra are restricted to the use of time-correlation functions evaluated from accurate atomistic molecular dynamics simulations, often at the abinitio level. The molecular interpretation of the computed spectra requires additional steps to deconvolve the spectroscopic contributions from local water and surface structural populations at the interface. The lack of a standard procedure to do this often hampers rationalization. To overcome these challenges, we rewrite the equations for spectra calculation into a sum of partial contributions from interfacial populations, weighted by their abundance at the interface. We show that SFG signatures from each population can be parameterized into a minimum dataset of reference partial spectra. Accurate spectra can then be predicted by just evaluating the statistics of interfacial populations, which can be done even with force field simulations as well as with analytic models. This approach broadens the range of simulation techniques from which theoretical spectra can be calculated, opening toward non-atomistic and Monte Carlo simulation approaches. Most notably, it allows constructing accurate theoretical spectra for interfacial conditions that cannot even be simulated, as we demonstrate for the pH-dependent SFG spectra of silica/water interfaces.