Sulfur Isotope Effects Research Articles

Estimating the effect of elemental sulfur disproportionation on the sulfur-isotope signatures in sediments

Experimental studies with pure and enrichment cultures have shown that microbial disproportionation of sulfur intermediates can increase the sulfur isotopic difference between dissolved sulfate and sulfide produced by microbial sulfate reduction. However, few studies have quantified the isotope effect of disproportionation in natural settings. Here we describe a conceptual model to quantify the contribution of elemental sulfur disproportionation to the isotopic difference between dissolved sulfate and sulfide. Our results show that disproportionation increases the isotopic difference between sulfate and sulfide, but the effect is less pronounced than suggested by culture experiments. The resulting isotopic difference depends on the ratio of the rate of microbial sulfate reduction to that of disproportionation. It can be shown that in natural sediments, this relationship can be expressed as a function of the isotope enrichment during disproportionation multiplied by the fraction of sulfide that escapes burial in the form of metal sulfides. This implies that in many natural sediments, the sulfur isotope effect is limited to a few permil (mUr) or less.

What Controls the Sulfur Isotope Fractionation during Dissimilatory Sulfate Reduction?

Sulfate often behaves conservatively in the oxygenated environments but serves as an electron acceptor for microbial respiration in a wide range of natural and engineered systems where oxygen is depleted. As a ubiquitous anaerobic dissimilatory pathway, therefore, microbial reduction of sulfate to sulfide has been of continuing interest in the field of microbiology, ecology, biochemistry, and geochemistry. Stable isotopes of sulfur are an effective tool for tracking this catabolic process as microorganisms discriminate strongly against heavy isotopes when cleaving the sulfur-oxygen bond. Along with its high preservation potential in environmental archives, a wide variation in the sulfur isotope effects can provide insights into the physiology of sulfate reducing microorganisms across temporal and spatial barriers. A vast array of parameters, including phylogeny, temperature, respiration rate, and availability of sulfate, electron donor, and other essential nutrients, has been explored as a possible determinant of the magnitude of isotope fractionation, and there is now a broad consensus that the relative availability of sulfate and electron donors primarily controls the magnitude of fractionation. As the ratio shifts toward sulfate, the sulfur isotope fractionation increases. The results of conceptual models, centered on the reversibility of each enzymatic step in the dissimilatory sulfate reduction pathway, are in qualitative agreement with the observations, although the underlying intracellular mechanisms that translate the external stimuli into the isotopic phenotype remain largely unexplored experimentally. This minireview offers a snapshot of our current understanding of the sulfur isotope effects during dissimilatory sulfate reduction as well as their potential quantitative applications. It emphasizes the importance of sulfate respiration as a model system for the isotopic investigation of other respiratory pathways that utilize oxyanions as terminal electron acceptors.

Theoretical estimates of equilibrium sulfur isotope effects among aqueous polysulfur and associated compounds with applications to authigenic pyrite formation and hydrothermal disproportionation reactions

Inorganic polysulfur compounds (polysulfides, Sx2-; polysulfur radical ions, Sx·-; thiosulfate, S2O32-; polythionate, SxO62-; elemental sulfur, e.g. S8) participate in numerous geochemical processes related to the sulfur cycle. These include authigenic pyrite formation in sediments undergoing early stages of diagenesis, reactions associated with magmatic-hydrothermal processes, and numerous other aquatic sulfur redox processes (e.g., pyrite and sulfide oxidation). Sulfur isotope fractionations among many of these and associated compounds (e.g., H2S, HSO4-) are either unknown or unconstrained over wide ranges of temperatures. We present theoretical estimates of equilibrium sulfur isotope fractionation factors among aqueous polysulfur compounds (including select polysulfides, polysulfur radical anions, and polythionates) and select aqueous sulfide and sulfate compounds that correspond to all three stable isotope ratios of sulfur (33S/32S, 34S/32S, 36S/32S). Our estimates are based on electronic structure calculations performed at the B3LYP/6–31+G(d,p) level of theory and basis set implemented in concert with an explicit solvation model whereby molecules are encapsulated in water clusters of varying size (30–52 H2O) to simulate the aqueous solvation environment. These calculations yield relatively small magnitude fractionation factors between aqueous polysulfides, polysulfur radicals, and reduced sulfur moieties in polythionates relative to the aqueous sulfide compounds but reveal numerous crossovers that result in non-intuitive temperature dependencies. Our predictions of 34S/32S-based fractionation factors among aqueous sulfur compounds generally agree with previous experimental constraints where available within estimated uncertainties (e.g., HSO4-/H2S(aq), H2S(aq)/HS-, HSO4-/S0, H2S(aq)/S0). We use our calculations to explore equilibrium isotope fractionations among polysulfur and sulfide compounds that are precursors to authigenic pyrite in the framework of established mechanisms (e.g., the polysulfide mechanism). We examine possible explanations for why pyrite formation may be associated with relatively small isotope fractionation with respect to precursor aqueous sulfur compounds. We additionally use our theoretical calculations to constrain multiple sulfur isotope (33S/32S, 34S/32S, 36S/32S) mass balance models associated with the abiotic hydrolytic disproportionation of intermediate sulfur compounds (SO2, S8, S3·-) relevant to hydrothermal-magmatic-volcanic systems in order to illustrate the potential for subtle but potentially resolvable effects expressed in values of Δ33S and Δ36S associated with these processes. We apply a SO2 disproportionation mass balance model based on previous work but newly constrained by our theoretical calculations to (hyper-) acid crater lakes associated with active volcanoes, and newly highlight the potential for the utility of multiple sulfur isotope analyses in volcanic gas monitoring and constraining sulfur cycling processes in such systems.

Physiological, genomic, and sulfur isotopic characterization of methanol metabolism by Desulfovibrio carbinolicus.

Methanol is often considered as a non-competitive substrate for methanogenic archaea, but an increasing number of sulfate-reducing microorganisms (SRMs) have been reported to be capable of respiring with methanol as an electron donor. A better understanding of the fate of methanol in natural or artificial anaerobic systems thus requires knowledge of the methanol dissimilation by SRMs. In this study, we describe the growth kinetics and sulfur isotope effects of Desulfovibrio carbinolicus, a methanol-oxidizing sulfate-reducing deltaproteobacterium, together with its genome sequence and annotation. D. carbinolicus can grow with a series of alcohols from methanol to butanol. Compared to longer-chain alcohols, however, specific growth and respiration rates decrease by several fold with methanol as an electron donor. Larger sulfur isotope fractionation accompanies slowed growth kinetics, indicating low chemical potential at terminal reductive steps of respiration. In a medium containing both ethanol and methanol, D. carbinolicus does not consume methanol even after the cessation of growth on ethanol. Among the two known methanol dissimilatory systems, the genome of D. carbinolicus contains the genes coding for alcohol dehydrogenase but lacks enzymes analogous to methanol methyltransferase. We analyzed the genomes of 52 additional species of sulfate-reducing bacteria that have been tested for methanol oxidation. There is no apparent relationship between phylogeny and methanol metabolizing capacity, but most gram-negative methanol oxidizers grow poorly, and none carry homologs for methyltransferase (mtaB). Although the amount of available data is limited, it is notable that more than half of the known gram-positive methanol oxidizers have both enzymatic systems, showing enhanced growth relative to the SRMs containing only alcohol dehydrogenase genes. Thus, physiological, genomic, and sulfur isotopic results suggest that D. carbinolicus and close relatives have the ability to metabolize methanol but likely play a limited role in methanol degradation in most natural environments.

Unconventional isotope effect on transition temperature in BiS2-based superconductor Bi4O4S3

We report the sulfur isotope effect on transition temperature (Tc) in a BiS2-based superconductor Bi4O4S3. Polycrystalline samples of Bi4O4S3 were prepared using 32S and 34S isotope chemicals. From magnetization analyses, the isotope exponent (αS) was estimated as −0.1 < αS < 0.1. Although the Tc estimated from electrical resistivity was scattered as compared to those estimated from the magnetization, we observed no clear correlation between Tc and the isotope mass. The present results suggest that unconventional paring states are essential in Bi4O4S3.

A Simple Elemental Sulfur Reduction Method for Isotopic Analysis and Pilot Experimental Tests of Symmetry‐Dependent Sulfur Isotope Effects in Planetary Processes

AbstractRecent insights into fundamental mechanisms underlying quadruple stable sulfur isotope (32S, 33S, 34S, and 36S) mass‐independent fractionation (S‐MIF) chemistry and potential implications for planetary processes highlight the urgent need of conducting laboratory experiments to delineate the chemical physics of S‐MIF. Elemental sulfur (S0), a ubiquitous component in the atmospheres of early Earth and Mars, is a major product or reactant in most experiments. Developing different chemical protocols for isotopic analysis is consequently of utility. The reduction of S0 to hydrogen sulfide (H2S) is the first step of the fluorination method for isotopic analysis, but existing S0 reduction methods require relatively long chemical reagent preparation time. Here we present an operationally simple and rapid method for reducing S0 to H2S directly by “Thode solution.” External uncertainties of our method for δ34S, Δ33S, and Δ36S measurements (associated with reduction, fluorination, purification, and mass spectrometer analysis) are 0.3‰, 0.01‰, and 0.2‰, respectively, comparable with traditional methods. This new technique was used to determine quadruple stable sulfur isotope compositions of product S0 in a set of pilot experiments designed to investigate possible symmetry‐dependent isotope effects in planetary‐relevant elemental sulfur recombination reactions. Differences in Δ33S and Δ36S between initial and produced S0 are slightly larger than analytical errors, shedding new light into the role of sulfur recombination reactions in S‐MIF. Our study offers a practical approach for measuring multiple isotopic compositions of S0 in laboratory and natural samples and creates new opportunities for deepening understanding of S‐MIF signatures in Archean rocks and Martian meteorites.

Effect of sulfate limitation on sulfur isotope fractionation in batch cultures of sulfate reducing bacteria

Dissimilatory reduction of sulfate to sulfide produces a wide range of sulfur isotope effects, enriching heavy isotopes of sulfur in the remaining sulfate. This isotope fractionation is known to decrease at low sulfate concentrations, which has been used to assess marine sulfate levels throughout the geologic record. So far, the relationships of fractionations to the sulfate concentrations have been examined exclusively in continuous cultures or cell suspensions with continuous removal of the metabolic product sulfide, although sulfate respiration often results in the accumulation of high levels of sulfide in nature. High sulfide levels, as opposed to the effect of sulfate depletion, can increase the magnitude of sulfur isotope fractionation. Thus, I investigate the sulfur isotope fractionation by sulfate reducing bacteria, Desulfovibrio alaskensis and Desulfovibrio sp. DMSS1, in pyruvate batch cultures, where low sulfate but high sulfide concentrations can be achieved. The improved sensitivity of the new analytical method using multicollector ICP-MS makes it easier to measure the sulfur isotope composition of residual sulfate. Both species of Desulfovibrio fractionate sulfur isotopes by 11 to 12‰ with sulfate in excess, but as sulfate is used up in the culture medium, sulfur isotope fractionations decrease down to 0‰ and 3‰ for D. alaskensis and DMSS1, respectively. The results here suggest that elevated sulfide levels are likely secondary to the sulfate availability in determining the magnitude of isotope fractionation. However, the threshold sulfate concentrations at which isotope effect diminishes are apparently different between the two species studied.

Precise determination of equilibrium sulfur isotope effects during volatilization and deprotonation of dissolved H2S

Sulfide (H_2S, HS^−, and S^(2−)) is ubiquitous in marine porewaters as a result of microbial sulfate reduction, constituting the reductive end of the biogeochemical sulfur cycle. Stable isotopes have been widely used to constrain the sulfur cycle, because the redox transformations of sulfur compounds, such as microbial sulfate reduction, often exhibit sizable kinetic isotope effects. In contrast to sulfate ion (SO_4^(2−)), the most abundant form of dissolved sulfur in seawater, H2S is volatile and also deprotonated at near neutral pH. Equilibrium isotope partitioning between sulfide species can therefore overlap with kinetic isotope effects during reactions involving sulfide as either reactant or intermediate. Previous experimental attempts to measure equilibrium fractionation between H_2S and HS− have reached differing results, likely due to solutions of widely varying ionic strength. In this study, we measured the sulfur isotope fractionation between total dissolved sulfide and gaseous H2S at 20.6 ± 0.5 °C over the pH range from 2 to 8, and calculated the equilibrium isotope effects associated with deprotonation of dissolved H_2S. By using dilute solutions of Na2S, made possible by the improved sensitivity of mass spectrometric techniques, uncertainty in the first dissociation constant of H2S due to ionic strength could be better controlled. This in turn allowed us to close sulfur isotope mass balance for our experiments and increase the accuracy of the estimated fractionation factor. At equilibrium, aqueous H2S was enriched in ^(34)S by 0.7‰ and 3.1‰ relative to gaseous H_2S and aqueous HS−, respectively. The estimated fractionation between aqueous H_2S and HS^− lies between two earlier experimental reports, but agrees within the uncertainty of the measurements with a recent theoretical calculation.

Role of APS reductase in biogeochemical sulfur isotope fractionation

Sulfur isotope fractionation resulting from microbial sulfate reduction (MSR) provides some of the earliest evidence of life, and secular variations in fractionation values reflect changes in biogeochemical cycles. Here we determine the sulfur isotope effect of the enzyme adenosine phosphosulfate reductase (Apr), which is present in all known organisms conducting MSR and catalyzes the first reductive step in the pathway and reinterpret the sedimentary sulfur isotope record over geological time. Small fractionations may be attributed to low sulfate concentrations and/or high respiration rates, whereas fractionations greater than that of Apr require a low chemical potential at that metabolic step. Since Archean sediments lack fractionation exceeding the Apr value of 20‰, they are indicative of sulfate reducers having had access to ample electron donors to drive their metabolisms. Large fractionations in post-Archean sediments are congruent with a decline of favorable electron donors as aerobic and other high potential metabolic competitors evolved.

Deconstructing the Dissimilatory Sulfate Reduction Pathway: Isotope Fractionation of a Mutant Unable of Growth on Sulfate.

The sulfur isotope record provides key insight into the history of Earth's redox conditions. A detailed understanding of the metabolisms driving this cycle, and specifically microbial sulfate reduction (MSR), is crucial for accurate paleoenvironmental reconstructions. This includes a precise knowledge of the step-specific sulfur isotope effects during MSR. In this study, we aim at resolving the cellular-level fractionation factor during dissimilatory sulfite reduction to sulfide within MSR, and use this measured isotope effect as a calibration to enhance our understanding of the biochemistry of sulfite reduction. For this, we merge measured isotope effects associated with dissimilatory sulfite reduction with a quantitative model that explicitly links net fractionation, reaction reversibility, and intracellular metabolite levels. The highly targeted experimental aspect of this study was possible by virtue of the availability of a deletion mutant strain of the model sulfate reducer Desulfovibrio vulgaris (strain Hildenborough), in which the sulfite reduction step is isolated from the rest of the metabolic pathway owing to the absence of its QmoABC complex (ΔQmo). This deletion disrupts electron flux and prevents the reduction of adenosine phosphosulfate (APS) to sulfite. When grown in open-system steady-state conditions at 10% maximum growth rate in the presence of sulfite and lactate as electron donor, sulfur isotope fractionation factors averaged −15.9‰ (1 σ = 0.4), which appeared to be statistically indistinguishable from a pure enzyme study with dissimilatory sulfite reductase. We coupled these measurements with an understanding of step-specific equilibrium and kinetic isotope effects, and furthered our mechanistic understanding of the biochemistry of sulfite uptake and ensuing reduction. Our metabolically informed isotope model identifies flavodoxin as the most likely electron carrier performing the transfer of electrons to dissimilatory sulfite reductase. This is in line with previous work on metabolic strategies adopted by sulfate reducers under different energy regimes, and has implications for our understanding of the plasticity of this metabolic pathway at the center of our interpretation of modern and palaeo-environmental records.

Five-S-isotope evidence of two distinct mass-independent sulfur isotope effects and implications for the modern and Archean atmospheres

The signature of mass-independent fractionation of quadruple sulfur stable isotopes (S-MIF) in Archean rocks, ice cores, and Martian meteorites provides a unique probe of the oxygen and sulfur cycles in the terrestrial and Martian paleoatmospheres. Its mechanistic origin, however, contains some uncertainties. Even for the modern atmosphere, the primary mechanism responsible for the S-MIF observed in nearly all tropospheric sulfates has not been identified. Here we present high-sensitivity measurements of a fifth sulfur isotope, stratospherically produced radiosulfur, along with all four stable sulfur isotopes in the same sulfate aerosols and a suite of chemical species to define sources and mechanisms on a field observational basis. The five-sulfur-isotope and multiple chemical species analysis approach provides strong evidence that S-MIF signatures in tropospheric sulfates are concomitantly affected by two distinct processes: an altitude-dependent positive 33S anomaly, likely linked to stratospheric SO2 photolysis, and a negative 36S anomaly mainly associated with combustion. Our quadruple stable sulfur isotopic measurements in varying coal samples (formed in the Carboniferous, Permian, and Triassic periods) and in SO2 emitted from combustion display normal 33S and 36S, indicating that the observed negative 36S anomalies originate from a previously unknown S-MIF mechanism during combustion (likely recombination reactions) instead of coal itself. The basic chemical physics of S-MIF in both photolytic and thermal reactions and their interplay, which were not explored together in the past, may be another ingredient for providing deeper understanding of the evolution of Earth's atmosphere and life's origin.

Unusual sulfur isotope effect and extremely high critical temperature in H3S superconductor

Recent experiments have set a new record for the transition temperature at which a material (hydrogen sulfide, H3S) becomes superconducting. Moreover, a pronounced isotope shift of TC in D3S is evidence of an existence of phonon-mediated pairing mechanism of superconductivity that is consistent with the well established Bardeen-Cooper-Schrieffer scenario. Herein, we reported a theoretical studies of the influence of the substitution of 32S atoms by the heavier isotopes 33S, 34S and 36S on the electronic properties, lattice dynamics and superconducting critical temperature of H3S. There are two equally fundamental results presented in this paper. The first one is an anomalous sulfur-derived superconducting isotope effect, which, if observed experimentally, will be subsequent argument that proves to the classical electron-phonon interaction. The second one is fact that critical temperature rise to extremely high value of 242 K for H336S at 155 GPa. This result brings us closer to the room temperature superconductivity.

2017 Leonard Medal for Mark Thiemens

2017 Leonard Medal for Mark Thiemens

Theoretical estimates of equilibrium sulfur isotope effects in aqueous sulfur systems: Highlighting the role of isomers in the sulfite and sulfoxylate systems

We present theoretical calculations for all three isotope ratios of sulfur (33S/32S, 34S/32S, 36S/32S) at the B3LYP/6-31+G(d,p) level of theory for aqueous sulfur compounds modeled in 30–40H2O clusters spanning the range of sulfur oxidation state (Sn, n=−2 to +6) for estimating equilibrium fractionation factors in aqueous systems. Computed 34β values based on major isotope (34S/32S) reduced partition function ratios (RPFRs) scale to a first order with sulfur oxidation state and coordination, where 34β generally increase with higher oxidation state and increasing coordination of the sulfur atom. Exponents defining mass dependent relationships based on β values (x/34κ=ln(xβ)/ln(34β), x=33 or 36) conform to tight ranges over a wide range of temperature for all aqueous compounds (33/34κ≈0.5148–0.5159, 36/34κ≈1.89–1.90 from T⩾0°C). The exponents converge near a singular value for all compounds at the high temperature limit (33/34κT→∞=0.51587±0.00003 and 36/34κT→∞=1.8905±0.0002; 1s.d. of all computed compounds), and typically follow trends based on oxidation state and coordination similar to those seen in 34β values at lower temperatures. Theoretical equilibrium fractionation factors computed from these β-values are compared to experimental constraints for HSO3−T(aq)/SO2(g, aq), SO2(aq)/SO2(g), H2S(aq)/H2S(g), H2S(aq)/HS−(aq), SO42−(aq)/H2ST(aq), S2O32−(aq) (intramolecular), and S2O32−(aq)/H2ST(aq), and generally agree within a reasonable estimation of uncertainties. We make predictions of fractionation factors where other constraints are unavailable. Isotope partitioning of the isomers of protonated compounds in the sulfite and sulfoxylate systems depend strongly on whether protons are bound to either sulfur or oxygen atoms. The magnitude of the HSO3−T/SO32− major isotope (34S/32S) fractionation factor is predicted to increase with temperature from 0 to 70°C due to the combined effects of the large magnitude (HS)O3−/SO32− fractionation factor (1000ln34α(HS)bisulfite-sulfite=19.9‰, 25°C) relative to the (HO)SO2−/SO32− fractionation factor (1000ln34α(HO)bisulfite–sulfite=−2.2‰, 25°C), and the increased stability of the (HS)O3− isomer with increasing temperature. We argue that isomerization phenomenon should be considered in models of the sulfur cycle, including models that describe the overall sulfur isotope fractionations associated with microbial metabolism (e.g., microbial sulfate reduction).

High Sulfur Isotope Fractionation Associated with Anaerobic Oxidation of Methane in a Low-Sulfate, Iron-Rich Environment

Sulfur isotope signatures provide key information for the study of microbial activity in modern systems and the evolution of the Earth surface redox system. Microbial sulfate reducers shift sulfur isotope distributions by discriminating against heavier isotopes. This discrimination is strain-specific and often suppressed at sulfate concentrations in the lower micromolar range that are typical to freshwater systems and inferred for ancient oceans. Anaerobic oxidation of methane (AOM) is a sulfate-reducing microbial process with a strong impact on global sulfur cycling in modern habitats and potentially in the geological past, but its impact on sulfur isotope signatures is poorly understood, especially in low sulfate environments. We investigated sulfur cycling and 34S fractionation in a low-sulfate freshwater sediment with biogeochemical conditions analogous to Early Earth environments. The zone of highest AOM activity was associated in situ with a zone of strong 34S depletions in the pool of reduced sulfur species, indicating a coupling of sulfate reduction and AOM at sulfate concentrations < 50 µmol L-1. In slurry incubations of AOM-active sediment, the addition of methane stimulated sulfate reduction and induced a bulk sulfur isotope effect of ~29 ‰. Our results imply that sulfur isotope signatures may be strongly impacted by AOM even at sulfate concentrations two orders of magnitude lower than at present oceanic levels. Therefore, we suggest that sulfur isotope fractionation during AOM must be considered when interpreting 34S signatures in modern and ancient environment.

Chemoenzymatic Synthesis of (36)S Isotopologues of Methionine and S-Adenosyl-L-methionine.

Substrates containing isotope labels at specific atoms are required for transition-state analysis based on the measurement of multiple kinetic isotope effects.(36)S-labeled l-methionine and S-adenosyl-l-methionine were synthesized from elemental sulfur using a chemoenzymatic approach with >98% (36)S enrichment. This method provides access to previously inaccessible sulfur isotope-labeled substrates for sulfur kinetic isotope effect studies.

Characteristic isotope fractionation patterns in s-triazine degradation have their origin in multiple protonation options in the s-triazine hydrolase TrzN.

s-Triazine herbicides (atrazine, ametryn) are groundwater contaminants which may undergo microbial hydrolysis. Previously, inverse nitrogen isotope effects in atrazine degradation by Arthrobacter aurescens TC1 (i) delivered highly characteristic (13C/12C, 15N/14N) fractionation trends for pathway identification and (ii) suggested that the s-triazine ring nitrogen was protonated in the enzyme s-triazine hydrolase (TrzN) where (iii) TrzN crystal structure and mutagenesis indicated H+-transfer from the residue E241. This study tested the general validity of these conclusions for atrazine and ametryn with purified TrzN and a TrzN-E241Q site-directed mutant. TrzN-E241Q lacked activity with ametryn; otherwise, degradation consistently showed normal carbon isotope effects (εcarbon=-5.0‰±0.2‰ (atrazine/TrzN), εcarbon=-4.2‰±0.5‰ (atrazine/TrzN-E241Q), εcarbon=-2.4‰±0.3‰ (ametryn/TrzN)) and inverse nitrogen isotope effects (εnitrogen=2.5‰±0.1‰ (atrazine/TrzN), εnitrogen=2.1‰±0.3‰ (atrazine/TrzN-E241Q), εnitrogen=3.6‰±0.4‰ (ametryn/TrzN)). Surprisingly, TrzN-E241Q therefore still activated substrates through protonation implicating another proton donor besides E241. Sulfur isotope effects were larger in enzymatic (εsulfur=-14.7‰±1.0‰, ametryn/TrzN) than in acidic ametryn hydrolysis (εsulfur=-0.2‰±0.0‰, pH 1.75), indicating rate-determining C-S bond cleavage in TrzN. Our results highlight a robust inverse 15N/14N fractionation pattern for identifying microbial s-triazine hydrolysis in the environment caused by multiple protonation options in TrzN.

Predictive isotope model connects microbes in culture and nature.

In PNAS, Wing and Halevy (1) present a new model that quantitatively describes the magnitude of sulfur isotope fractionation produced by dissimilatory microbial sulfate reduction (MSR). MSR is a major player in the global biogeochemical cycles and is responsible for the respiration of up to 30% of organic matter in marine sediments (2). This metabolism produces large isotope effects, in which the product, sulfide, is depleted in the heavy isotopes (33S, 34S, and 36S) relative to the most abundant isotope 32S (3), enriching modern seawater sulfate in 34S by about 21‰ (parts per thousand) compared with mantle sulfur. Sedimentary sulfur minerals preserve a record of this effect and are used to track changes in the sulfur isotope composition of seawater and the biogeochemical sulfur, carbon, and oxygen cycles through geologic time (4). Such reconstructions require an understanding of factors that control the magnitude of sulfur isotope effects and dictate the fractionation of sulfur isotopes by sulfate reducers under a range of growth conditions.

Sulfur and oxygen isotope fractionation during sulfate reduction coupled to anaerobic oxidation of methane is dependent on methane concentration

Isotope signatures of sulfur compounds are key tools for studying sulfur cycling in the modern environment and throughout earth's history. However, for meaningful interpretations, the isotope effects of the processes involved must be known. Sulfate reduction coupled to the anaerobic oxidation of methane (AOM-SR) plays a pivotal role in sedimentary sulfur cycling and is the main process responsible for the consumption of methane in marine sediments − thereby efficiently limiting the escape of this potent greenhouse gas from the seabed to the overlying water column and atmosphere. In contrast to classical dissimilatory sulfate reduction (DSR), where sulfur and oxygen isotope effects have been measured in culture studies and a wide range of isotope effects has been observed, the sulfur and oxygen isotope effects by AOM-SR are unknown. This gap in knowledge severely hampers the interpretation of sulfur cycling in methane-bearing sediments, especially because, unlike DSR which is carried out by a single organism, AOM-SR is presumably catalyzed by consortia of archaea and bacteria that both contribute to the reduction of sulfate to sulfide.We studied sulfur and oxygen isotope effects by AOM-SR at various aqueous methane concentrations from 1.4±0.6 mM up to 58.8±10.5 mM in continuous incubation at steady state. Changes in the concentration of methane induced strong changes in sulfur isotope enrichment (εS34) and oxygen isotope exchange between water and sulfate relative to sulfate reduction (θO), as well as sulfate reduction rates (SRR). Smallest εS34 (21.9±1.9‰) and θO (0.5±0.2) as well as highest SRR were observed for the highest methane concentration, whereas highest εS34 (67.3±26.1‰) and θO (2.5±1.5) and lowest SRR were reached at low methane concentration. Our results show that εS34, θO and SRR during AOM-SR are very sensitive to methane concentration and thus also correlate with energy yield. In sulfate–methane transition zones, AOM-SR is likely to induce very large sulfur isotope fractionation between sulfate and sulfide (i.e. >60‰) and will drive the oxygen isotope composition of sulfate towards the sulfate–water oxygen isotope equilibrium value. Sulfur isotope fractionation by AOM-SR at gas seeps, where methane fluxes are high, will be much smaller (i.e. 20 to 40‰).

Vibronic origin of sulfur mass-independent isotope effect in photoexcitation of SO2and the implications to the early earth’s atmosphere

Signatures of mass-independent isotope fractionation (MIF) are found in the oxygen ((16)O,(17)O,(18)O) and sulfur ((32)S, (33)S, (34)S, (36)S) isotope systems and serve as important tracers of past and present atmospheric processes. These unique isotope signatures signify the breakdown of the traditional theory of isotope fractionation, but the physical chemistry of these isotope effects remains poorly understood. We report the production of large sulfur isotope MIF, with Δ(33)S up to 78‰ and Δ(36)S up to 110‰, from the broadband excitation of SO2 in the 250-350-nm absorption region. Acetylene is used to selectively trap the triplet-state SO2 ( (3)B1), which results from intersystem crossing from the excited singlet ( (1)A2/ (1)B1) states. The observed MIF signature differs considerably from that predicted by isotopologue-specific absorption cross-sections of SO2 and is insensitive to the wavelength region of excitation (above or below 300 nm), suggesting that the MIF originates not from the initial excitation of SO2 to the singlet states but from an isotope selective spin-orbit interaction between the singlet ( (1)A2/ (1)B1) and triplet ( (3)B1) manifolds. Calculations based on high-level potential energy surfaces of the multiple excited states show a considerable lifetime anomaly for (33)SO2 and (36)SO2 for the low vibrational levels of the (1)A2 state. These results demonstrate that the isotope selectivity of accidental near-resonance interactions between states is of critical importance in understanding the origin of MIF in photochemical systems.