Subsurface Treatment Systems Research Articles

Persistent Trace Organic Contaminants Are Transformed Rapidly under Sulfate- and Fe(III)-Reducing Conditions in a Nature-Based Subsurface Water Treatment System.

Subsurface treatment systems, such as constructed wetlands, riverbank filtration systems, and managed aquifer recharge systems, offer a low-cost means of removing trace organic contaminants from treated municipal wastewater. To assess the processes through which trace organic contaminants are removed in subsurface treatment systems, pharmaceuticals and several major metabolites were measured in porewater, sediment, and plants within a horizontal levee (i.e., a subsurface flow wetland that receives treated municipal wastewater). Concentrations of trace organic contaminants in each wetland compartment rapidly declined along the flow path. Mass balance calculations, analysis of transformation products, microcosm experiments, and one-dimensional transport modeling demonstrated that more than 60% of the contaminant removal could be attributed to transformation. Monitoring of the system with and without nitrate in the wetland inflow indicated that relatively biodegradable trace organic contaminants, such as acyclovir and metoprolol, were rapidly transformed under both operating conditions. Trace organic contaminants that are normally persistent in biological treatment systems (e.g., sulfamethoxazole and carbamazepine) were removed only when Fe(III)- and sulfate-reducing conditions were observed. Minor structural modifications to trace organic contaminants (e.g., hydroxylation) altered the pathways and extents of trace organic contaminant transformation under different redox conditions. These findings indicate that subsurface treatment systems can be designed to remove both labile and persistent trace organic contaminants via transformation if they are designed and operated in a manner that results in sulfate-and Fe(III)-reducing conditions.

A soil column study to evaluate treatment of trace elements from saline industrial wastewater.

Industrial wastewater from the flue gas desulfurization (FGD) process is characterized by the presence of trace elements of concern, such as selenium (Se) and boron (B) and relatively high salinity. To simulate treatment that FGD wastewater undergoes during transport through soils in subsurface treatment systems, a column study (140-d duration) was conducted with native Kansas soil and saline FGD wastewater, containing high Se and B concentrations (170 μg/L Se and 5.3 mg/L B) and negligible arsenic (As) concentration (∼1.2 μg/L As). Se, B, and As, and dissolved organic carbon concentrations and organic matter spectroscopic properties were measured in the influent and outflow. Influent Se concentrations were reduced by only ∼half in all treatments, and results suggest that Se sorption was inhibited by high salinity of the FGD wastewater. By contrast, relative concentrations (C/Co) of B in the outflow were typically <10%, suggesting that B sequestration may have been enhanced by higher salinity. Unexpected elevated As concentrations in the outflow (at >150 μg/L in the treatment with labile organic carbon addition) suggest that soils not previously known to be geogenic arsenic sources have the potential to release As to groundwater in the presence of high salinity wastewater and under reducing conditions.

RECIPROCATING SUBSURFACE TREATMENT SYSTEM KEEPS AIRPORT OUT OF THE DEEP FREEZE

RECIPROCATING SUBSURFACE TREATMENT SYSTEM KEEPS AIRPORT OUT OF THE DEEP FREEZE