Substrate Glycerol Research Articles

Deciphering in-situ surface reconstruction in two-dimensional CdPS3 nanosheets for efficient biomass hydrogenation

Steering on the intrinsic active site of an electrode material is essential for efficient electrochemical biomass upgrading to valuable chemicals with high selectivity. Herein, we show that an in-situ surface reconstruction of a two-dimensional layered CdPS3 nanosheet electrocatalyst, triggered by electrolyte, facilitates efficient 5-hydroxymethylfurfural (HMF) hydrogenation to 2,5-bis(hydroxymethyl)furan (BHMF) under ambient condition. The in-situ Raman spectroscopy and comprehensive post-mortem catalyst characterizations evidence the construction of a surface-bounded CdS layer on CdPS3 to form CdPS3/CdS heterostructure. This electrocatalyst demonstrates promising catalytic activity, achieving a Faradaic efficiency for BHMF reaching 91.3 ± 2.3 % and a yield of 4.96 ± 0.16 mg/h at − 0.7 V versus reversible hydrogen electrode. Density functional theory calculations reveal that the in-situ generated CdPS3/CdS interface plays a pivotal role in optimizing the adsorption of HMF* and H* intermediate, thus facilitating the HMF hydrogenation process. Furthermore, the reconstructed CdPS3/CdS heterostructure cathode, when coupled with MnCo2O4.5 anode, enables simultaneous BHMF and formate synthesis from HMF and glycerol substrates with high efficiency.

Promoting Electrocatalytic Glycerol C─C Bond Cleavage to Formate Coupled with H2 Production Over a CuxNi2–xP Catalyst

AbstractElectrocatalytic oxidation of glycerol, an oversupplied byproduct of the biodiesel industry, into high‐valued chemicals is alluring to diminishing current dependence on fossil energy. Formic acid is an important glycerol oxidation product that serves as a high‐energy‐density fuel and crucial precursor for the fine chemical industry while developing an electrocatalyst to efficiently convert glycerol into formic acid remains a challenge. Herein, a Cu‐doped nickel phosphide (CuxNi2–xP) electrocatalyst, achieving formate productivity of ≈11 mol m−2 h−1 at 1.54 V versus RHE over a broad glycerol concentration range (10–100 mm) is reported, which is greater than threefolds than that of Ni2P. Furthermore, CuxNi2–xP can enhance the cleavage of C─C bond in glycerol, reducing the production of intermediates and thus attaining high selectivity of formate. In situ experiments integrated with density functional theory (DFT) calculation revealed that the doping of Cu can promote the generation of NiIII─OOH species and enrich glycerol substrates in local environments on CuxNi2–xP surface, thus facilitating reaction efficiency. Finally, the study designed a membrane‐free flow electrolyzer for continuous upgrading glycerol to formate, attaining 16.4 mmol of formate coupled with 0.68 L of H2 at 1.75 V in 8 h.

Glycerol 3-Phosphate Dehydrogenase: Role of the Protein Conformational Change in Activation of a Readily Reversible Enzyme-Catalyzed Hydride Transfer Reaction.

Kinetic parameters are reported for glycerol 3-phosphate dehydrogenase (GPDH)-catalyzed hydride transfer from the whole substrate glycerol 3-phosphate (G3P) or truncated substrate ethylene glycol (EtG) to NAD, and for activation of the hydride transfer reaction of EtG by phosphite dianion. These kinetic parameters were combined with parameters for enzyme-catalyzed hydride transfer in the microscopic reverse direction to give the reaction equilibrium constants Keq. Hydride transfer from G3P is favored in comparison to EtG because the carbonyl product of the former reaction is stabilized by hyperconjugative electron donation from the -CH2R keto substituent. The kinetic data show that the phosphite dianion provides the same 7.6 ± 0.1 kcal/mol stabilization of the transition states for enzyme-catalyzed reactions in the forward [reduction of NAD by EtG] and reverse [oxidation of NADH by glycolaldehyde] directions. The experimental evidence that supports a role for phosphite dianion in stabilizing the active closed form of the GPDH (EC) relative to the ca. 6 kcal/mol more unstable open form (EO) is summarized.

Sequential Geometric Programming Method for Parameter Estimation of a Nonlinear System in Microbial Continuous Fermentation

This paper addresses the problem of parameter estimation for the microbial continuous fermentation of glycerol to 1,3-propanediol. A nonlinear dynamical system is first presented to describe the microbial continuous fermentation. Some mathematical properties of the dynamical system in the microbial continuous fermentation are also presented. A parameter estimation model is proposed to estimate the parameters of the dynamical system. The proposed estimation model is a large-scale, nonlinear, and nonconvex optimization problem if the number of experimental groups is large. A sequential geometric programming (SGP) method is proposed to efficiently solve the parameter estimation problem. The results indicated that our proposed SGP method can yield smaller errors between the experimental and calculated steady-state concentrations than the existing seven methods. For the five error indices considered, that is, the concentration errors of biomass, glycerol, 1,3-propanediol, acetic acid, and ethanol, the results obtained using the proposed SGP method are better than those obtained using the methods in the literature (Xiu et al., Gao et al., Sun et al., Sun et al., Li and Qu, Wang et al., and Zhang and Xu), with improvements of approximately 71.86–95.03%, 52.08–94.87%, 99.70–99.98%, 5.39–90.29%, and 12.67–80.83%, respectively. This concludes that the established dynamical system can better describe the microbial continuous fermentation. We also present that our established dynamical system has multiple positive steady states in some fermentation conditions. We observe that there are two regions of multiple positive steady states at relatively high values of substrate glycerol concentration in feed medium.

Expression and characterisation of human glycerol kinase: the role of solubilising agents and molecular chaperones.

Glycerol kinase (GK; EC 2.7.1.30) facilitates the entry of glycerol into pathways of glucose and triglyceride metabolism and may play a potential role in Type 2 diabetes mellitus (T2DM). However, the detailed regulatory mechanisms and structure of the human GK are unknown. The human GK gene was cloned into the pET-24a(+) vector and over-expressed in Escherichia coli BL21 (DE3). Since the protein was expressed as inclusion bodies (IBs), various culture parameters and solubilising agents were used but they did not produce bioactive His-GK; however, co-expression of His-GK with molecular chaperones, specifically pKJE7, achieved expression of bioactive His-GK. The overexpressed bioactive His-GK was purified using coloumn chromatography and characterised using enzyme kinetics. The overexpressed bioactive His-GK was purified apparently to homogeneity (∼295-fold) and characterised. The native His-GK was a dimer with a monomeric molecular weight of ∼55 kDa. Optimal enzyme activity was observed in TEA buffer (50 mM) at 7.5 pH. K+ (40 mM) and Mg2+ (2.0 mM) emerged as prefered metal ions for His-GK activity with specific activity 0.780 U/mg protein. The purified His-GK obeyed standard Michaelis-Menten kinetics with Km value of 5.022 µM (R2=0.927) for its substrate glycerol; whereas, that for ATP and PEP was 0.767 mM (R2=0.928) and 0.223 mM (R2=0.967), respectively. Other optimal parameters for the substrate and co-factors were also determined. The present study demonstrates that co-expression of molecular chaperones assists with the expression of bioactive human GK for its characterisation.

Glycerol Waste to Bio-Ethanol: Optimization of Fermentation Parameters by the Taguchi Method

Global attention caused by pollutants and greenhouse gas emissions leads to alternative fuels that decrease the dependence on fossil fuels and reduce the carbon footprint that preceded the development of biodiesel production. Glycerol residue is generated more significantly from the biodiesel industry as a byproduct and is left as waste. In this study, we utilized glycerol residue from the biodiesel industry as an excellent opportunity to convert ethanol by bioconversion. The waste glycerol was used as a good and cheap carbon source as a substrate to synthesize ethanol by immobilizing E. coli cells. The screening of parameters such as mass substrate, temperature, inoculum size, and fermentation time was carried out using the one-factor-at-a-time (OFAT) technique. The Taguchi model employed optimization of fermentation parameters. The process parameters showed the mass substrate glycerol of 20 g with an inoculum size of 20%, and 12 hours yielded the ethanol concentration of 10.0 g/L.

Aquaglyceroporin AQP7's affinity for its substrate glycerol: Have we reached convergence in the computed values of glycerol-aquaglyceroporin affinity?

AQP7 is one of the four human aquaglyceroporins that facilitate glycerol transport across the cell membrane, a biophysical process that is essential in human physiology. Therefore, it is interesting to compute AQP7's affinity for its substrate (glycerol) with reasonable certainty to compare with the experimental data suggesting high affinity in contrast with most computational studies predicting low affinity. In this study aimed at computing the AQP7-glycerol affinity with high confidence, we implemented a direct computation of the affinity from unbiased equilibrium molecular dynamics (MD) simulations of three all-atom systems constituted with 0.16 M, 4.32 M, and 10.23 M atoms, respectively. These three sets of simulations manifested a fundamental physics law that the intrinsic fluctuations of pressure in a system are inversely proportional to the system size (the number of atoms in it). These simulations showed that the computed values of glycerol-AQP7 affinity are dependent upon the system size (the inverse affinity estimations were, respectively, 47.3 mM, 1.6 mM, and 0.92 mM for the three model systems). In this, we obtained a lower bound for the AQP7-glycerol affinity (an upper bound for the dissociation constant). Namely, the AQP7-glycerol affinity is stronger than 1087/M (the dissociation constant is less than 0.92 mM). Additionally, we conducted hyper steered MD (hSMD) simulations to map out the Gibbs free-energy profile. From the free-energy profile, we produced an independent computation of the AQP7-glycerol dissociation constant being approximately 0.18 mM.

Glycerol as a Substrate and Inactivator of Coenzyme B12 -Dependent Diol Dehydratase.

Diol dehydratase, dependent on coenzyme B12 (B12 -dDDH), displays a peculiar feature of being inactivated by its native substrate glycerol (GOL). Surprisingly, the isofunctional enzyme, B12 -independent glycerol dehydratase (B12 -iGDH), does not undergo suicide inactivation by GOL. Herein we present a series of QM/MM and MD calculations aimed at understanding the mechanisms of substrate-induced suicide inactivation in B12 -dDDH and that of resistance of B12 -iGDH to inactivation. We show that the first step in the enzymatic transformation of GOL, hydrogen abstraction, can occur from both ends of the substrate (either C1 or C3 of GOL). Whereas C1 abstraction in both enzymes leads to product formation, C3 abstraction in B12 -dDDH results in the formation of a low energy radical intermediate, which is effectively trapped within a deep well on the potential energy surface. The long lifetime of this radical intermediate likely enables its side reactions, leading to inactivation. In B12 -iGDH, by comparison, C3 abstraction is an endothermic step; consequently, the resultant radical intermediate is not of low energy, and the reverse process of reforming the reactant is possible.

Model-based Optimization of Biopolymer Production from Glycerol

The present study focuses on sustainable production of biodegradable polymers by <br /> Cupriavidus necator DSMZ 545 using glycerol as substrate. The batch growth and biopolymer production kinetics were established in a 7-L bioreactor, which resulted in a <br /> total biomass of 8.88 g L–1 and poly(3-hydroxybutyrate) (PHB) accumulation of 6.76 g L–1. The batch kinetic and independently acquired substrate inhibition data were then used to develop a mathematical model for PHB production process. This was eventually used to design different nutrient feeding strategies under constant feed rate, decreasing feed rate, and pseudo steady state of substrate (glycerol) to optimize the PHB production during fed-batch cultivation. Among all the fed-batch cultivation strategies, the highest PHB accumulation and productivity of 13.12 g L–1 and 0.27 g L–1 h–1, respectively, was <br /> achieved in fed-batch bioreactor cultivation where a pseudo steady state with respect to <br /> glycerol was maintained.

α2-Macroglobulin-like protein 1 can conjugate and inhibit proteases through their hydroxyl groups, because of an enhanced reactivity of its thiol ester

Proteins in the α-macroglobulin (αM) superfamily use thiol esters to form covalent conjugation products upon their proteolytic activation. αM protease inhibitors use theirs to conjugate proteases and preferentially react with primary amines (e.g. on lysine side chains), whereas those of αM complement components C3 and C4B have an increased hydroxyl reactivity that is conveyed by a conserved histidine residue and allows conjugation to cell surface glycans. Human α2-macroglobulin–like protein 1 (A2ML1) is a monomeric protease inhibitor but has the hydroxyl reactivity–conveying histidine residue. Here, we have investigated the role of hydroxyl reactivity in a protease inhibitor by comparing recombinant WT A2ML1 and the A2ML1 H1084N mutant in which this histidine is removed. Both of A2ML1s' thiol esters were reactive toward the amine substrate glycine, but only WT A2ML1 reacted with the hydroxyl substrate glycerol, demonstrating that His-1084 increases the hydroxyl reactivity of A2ML1's thiol ester. Although both A2ML1s conjugated and inhibited thermolysin, His-1084 was required for the conjugation and inhibition of acetylated thermolysin, which lacks primary amines. Using MS, we identified an ester bond formed between a thermolysin serine residue and the A2ML1 thiol ester. These results demonstrate that a histidine-enhanced hydroxyl reactivity can contribute to protease inhibition by an αM protein. His-1084 did not improve A2ML1's protease inhibition at pH 5, indicating that A2ML1's hydroxyl reactivity is not an adaption to its acidic epidermal environment.

Structural and Physicochemical Characterization of Rhamnolipids produced by Pseudomonas aeruginosa P6

Rhamnolipids are important biosurfactants for application in bioremediation, enhanced oil recovery, pharmaceutical, and detergent industry. In this study, rhamnolipids extracted from P. aeruginosa P6 were characterized to determine their potential fields of application. Thin-layer chromatographic analysis of the produced rhamnolipids indicated the production of two homologues: mono- and di-rhamnolipids, whose structures were verified by 1H and 13C nuclear magnetic resonance spectroscopy. Additionally, high performance liquid chromatography-mass spectrometry identified seven different rhamnolipid congeners, of which a significantly high proportion was di-rhamnolipids reaching 80.16%. Rha-Rha-C10-C10 was confirmed as the principal compound of the rhamnolipid mixture (24.30%). The rhamnolipids were capable of lowering surface tension of water to 36 mN/m at a critical micelle concentration of 0.2 g/L, and exhibited a great emulsifying activity (E24 = 63%). In addition, they showed excellent stability at pH ranges 4–8, NaCl concentrations up to 9% (w/v) and temperatures ranging from 20 to 100 °C and even after autoclaving. These results suggest that rhamnolipids, produced by P. aeruginosa P6 using the cheap substrate glycerol, are propitious for biotechnology use in extreme and complex environments, like oil reservoirs and hydrocarbon contaminated soil. Moreover, P. aeruginosa P6 may be considered, in its wild type form, as a promising industrial producer of di-RLs, which have superior characteristics for potential applications and offer outstanding commercial benefits.

Transcriptomic analysis of gene expression of menaquinone-7 in Bacillus subtilis natto toward different oxygen supply

Menaquinone-7 (MK-7) is an important kind of vitamin K2 which plays significant roles in the treatment of coagulation and osteoporosis, and prevention of cardiovascular disease. This work was purposed to study the differences of gene expression at different oxygen supply conditions in Bacillus natto. The differences of fermentation characteristics, gene expression related to MK-7 biosynthesis, spore and biofilm formation were analyzed. The yield of MK-7 increased by two fold under high oxygen supply condition of 200 rpm. Further transcriptome analysis indicated that most of the enzymes in MK-7 biosynthesis pathway were also up-regulated. Moreover, glycerol kinase, fructose-bisphosphate aldolase and phosphofructokinase in glycolysis pathway were all up-regulated indicating that high oxygen supply can increase the consumption of substrate glycerol. Meanwhile, menD, encoded the rate-limiting enzyme in the MK pathway, was obviously up-regulated by 3.49-fold while most of the enzymes related to spore formation were down regulated at 200 rpm. Besides, superoxide dismutase (SOD2), catalase (CAT), hydroperoxide reductase (AhpF) and DNA-binding protein MrgA in the antioxidant defense system were up-regulated, while superoxide dismutase (SOD1) and glutathione peroxidase (GSH-Px) were down-regulated. These results could contribute to a better understanding for the effect of oxygen on the MK-7 production in Bacillus natto, and further analyze the molecular regulation mechanism of MK-7 biosynthesis.

Affinity shift of ATP upon glycerol binding to a glycerol kinase from the hyperthermophilic archaeon Thermococcus kodakarensis KOD1

Glycerol kinase (GK) is a key enzyme of glycerol metabolism. It participates in glycolysis and lipid membrane biosynthesis. A hexamer of GK from the hyperthermophilic archaeon Thermococcus kodakarensis KOD1(Tk-GK) was identified as a substrate-binding form of the enzyme. Here, the X-ray crystal structure analysis and the biochemical analysis was done and the relationships between its unique oligomer structure and substrate binding affinity were investigated. Wild type GK and mutant K271E GK, which disrupts the hexamer formation interface, were crystallized with and without their substrates and analyzed at 2.19-3.05Å resolution. In the absence of glycerol, Tk-GK was a dimer in solution. In the presence of its glycerol substrate, however, it became a hexamer consisting of three symmetrical dimers about the threefold axis. Through glycerol binding, all Tk-GK molecules in the hexamer were in closed form as a result of domain-motion. The closed form of Tk-GK had tenfold higher ATP affinity than the open form of Tk-GK. The hexamer structure stabilized the closed conformation and enhanced ATP binding affinity when the GK was bound to glycerol. This molecular mechanism is quite simple activity regulation mechanism among known GKs.

Solution structure and oligomeric state of the E. coliglycerol facilitator

Protein dynamics at atomic resolution can provide deep insights into the biological activities of proteins and enzymes but they can also make structure and dynamics studies challenging. Despite their well-known biological and pharmaceutical importance, integral membrane protein structure and dynamics studies lag behind those of water-soluble proteins mainly owing to solubility problems that result upon their removal from the membrane. Escherichia coli glycerol facilitator (GF) is a member of the aquaglyceroporin family that allows for the highly selective passive diffusion of its substrate glycerol across the inner membrane of the bacterium. Previous molecular dynamics simulations and hydrogen-deuterium exchange studies suggested that protein dynamics play an important role in the passage of glycerol through the protein pore. With the aim of studying GF dynamics by solution and solid-state nuclear magnetic resonance (NMR) spectroscopy we optimized the expression of isotope-labelled GF and explored various solubilizing agents including detergents, osmolytes, amphipols, random heteropolymers, lipid nanodiscs, bicelles and other buffer additives to optimize the solubility and polydispersity of the protein. The GF protein is most stable and soluble in lauryl maltose neopentyl glycol (LMNG), where it exists in a tetramer-octamer equilibrium. The solution structures of the GF tetramer and octamer were determined by negative-stain transmission electron microscopy (TEM), size-exclusion chromatography small-angle X-ray scattering (SEC-SAXS) and solid-state magic-angle spinning NMR spectroscopy. Although NMR sample preparation still needs optimization for full structure and dynamics studies, negative stain TEM and SEC-SAXS revealed low-resolution structures of the detergent-solubilized tetramer and octamer particles. The non-native octamer appears to form from the association of the cytoplasmic faces of two tetramers, the interaction apparently mediated by their disordered N- and C-termini. This information may be useful in future studies directed at reducing the heterogeneity and self-association of the protein.

Fumarate dependent protein composition under aerobic and anaerobic growth conditions in Escherichia coli

In the absence of sugars, C4-dicarboxylates (C4DC) like fumarate represent important substrates for growth of Escherichia coli. Aerobically, C4DCs are oxidized to CO2 whereas anaerobically, C4DCs are used for fumarate respiration. In order to determine the impact of fumarate under aerobic and anaerobic conditions, proteomes of E. coli W3110 grown aerobically or anaerobically with fumarate and/or the non-C4DC substrate glycerol were comparatively profiled by nanoLC-MS/MS. Membrane enrichment allowed sensitive detection of membrane proteins. A total of 1657 proteins of which 646 and 374 were assigned to the cytosol or membrane, respectively, were covered. Presence of fumarate triggered changes (≥ 2fold) to the levels of 211 and 76 proteins under aerobic and anaerobic growth, respectively. The fumarate induced changes included proteins encoded by genes regulated by the C4DC two-component system DcuS-DcuR (DctA, DcuB, FumB, FrdABC proteins) catalyzing uptake and initial catabolic steps. Many of the proteins displaying altered levels are not part of the DcuS-DcuR regulon, including proteins of citric acid cycle and associated pathways (aerobic), proteins involved in motility and chemotaxis (anaerobic), and oxidative stress. Their genes are mostly preceded by cAMP receptor protein (CRP) sites, some by DcuR-like sites. Testing of selected genes confirmed regulation by CRP and DcuS-DcuR. SignificanceGlobal protein profiling of the soluble and the membrane fraction provides a comprehensive view on the protein pattern of E. coli grown aerobically and anaerobically with or without fumarate. The results disclose during aerobic growth besides the known impact of the C4-dicarboxylates (C4DC) on carbon utilization and citric acid cycle major adaptations in amino acid metabolism. In contrast, protein alterations in the presence of fumarate under anaerobic conditions point to enhanced motility and chemotaxis. Only proteins (transporters, initial metabolic steps) feeding external C4DCs to the central pathways were regulated by the C4DC two-component system DcuS-DcuR, whereas other protein levels were controlled in an indirect manner by CRP triggered catabolite control and other mechanisms. Consequently, metabolic and transcriptional regulation by C4DCs is apparently effected by a network of the DcuS-DcuR system with important contribution by catabolite control.

Fermentation Process of Glycerol to Arabitol from Byproducts of Reutalis trisperma Biodiesel Using Yeast of Debaryomyces Hansenii

Arabitol byproduct on the production of biodiesel Reutalis trisperma has calories of 0.2 cals / g equivalent to the level of sweetness of sucrose can be produced by using the yeast of Debaryomyces hansenii. The research was done by experimental method and descriptive analysis with two replications. The variation in this study was the ratio between the concentration of glycerol substrate and the fermentation medium added to 250 m / L of work volume in five treatments, namely: A (1: 16) crude glycerol, B (1: 16) pure glycerol, C (1: 8) crude glycerol, D (1:5) crude glycerol, and E (1:4) crude glycerol. The experimental results that the D. hansenii ITB CC R85 yeast may accumulate the formation of arabitol during the stationary phase at 120 h. The best fermentation condition was obtained at treatment C with a specific growth rate (μ) of 0.0608/h, arabitol concentration of 0.2373 g / L, the yield of arabitol to glycerol (Yp / s) of 0.0041 g / g, the yield of biomass to the substrate (Yx / s) of 0.3214 g / g.

Homoethanol production from cellobionate and glycerol using recombinant Klebsiella oxytoca strains

Cellobionic acid, an oxidized cellulose degradation product, can be produced from cellulosic biomass. Engineered strains of Klebsiella oxytoca BW21 and WT26 can effectively use cellobionate for ethanol production. However, because cellobionate is a more oxidized substrate than cellobiose, oxidized products such as acetate must be produced as by-products to maintain the overall redox balance, and homoethanol production is not possible. One of the strategies to avoid the redox imbalance problem and achieve homoethanol production is co-fermentation of cellobionate with a more reduced substrate glycerol. When cellobionate and glycerol were used as the carbon source by K. oxytoca BW 21, ethanol yield was about 62%–67%. Co-utilization of cellobionate and glycerol in batch fermentation increased the yield of ethanol to about 77% and substantially decreased the accumulation of by-products (such as acetate and 1,3-propanediol). However, glycerol imposes carbon catabolite repression on cellobionate utilization. The utilization rate mismatch between these two substrates limits the benefits of redox recycling between the two substrates’ utilization pathways. When recombinant strain WT26 (which is disabled in glycerol utilization when fermented alone) was used to co-ferment cellobionate and glycerol, the two substrates’ utilization rates exactly matched, which led to an ethanol yield improvement to 96%.

Computational Study of Glycerol Binding within the Active Site of Coenzyme B12-Dependent Diol Dehydratase.

Molecular dynamics (MD) simulations have been employed for the first time to gain insight into the geometry of glycerol (GOL) bound within the active site of B12-dependent diol dehydratase (B12-dDDH). A peculiar feature of the B12-dDDH enzyme is that it undergoes suicidal inactivation by the substrate glycerol. To fully understand the inactivation mechanism, it is crucial to identify all possible interactions between GOL and the surrounding amino acid residues in the enzyme-substrate complex. Particularly important is the orientation of the C3-OH group in GOL since the presence of this OH group is the only difference between GOL and propanediol (PDO), a substrate for B12-dDDH that does not induce suicidal inactivation. The MD simulations indicate that glycerol can adopt two conformations that differ with respect to the orientation of the C3-OH group; in one conformer, the C3-OH group is oriented toward Ser301 (C3-OH···Ser301), and in the other toward Asp335 (C3-OH···Asp335). Although the former configuration is consistent with the crystal structure of B12-dDDH crystallized with cyanocobalamin (CNCbl) as the cofactor, MD simulations of this system suggest a substantial predominance of the latter conformer. A similar result with an even higher preference for the latter conformer is obtained for B12-dDDH with 5'-deoxyadenosylcobalamin (AdoCbl) as a cofactor. Employing QM/MM calculations it is found that the energy difference between the two conformers of GOL is very small in CNCbl B12-dDDH, where the slightly preferred conformer is C3-OH···Ser301. However, in AdoCbl B12-dDDH, this energy difference is higher, implying that GOL exists predominantly as the C3-OH···Asp335 conformer. These findings offer a new perspective for investigations of substrate-induced inactivation of the B12-dDDH enzyme.

Cofactor Regeneration Using Permeabilized Escherichia coli Expressing NAD(P)+-Dependent Glycerol-3-Phosphate Dehydrogenase.

Oxidoreductases are effective biocatalysts, but their practical use is limited by the need for large quantities of NAD(P)H. In this study, a whole-cell biocatalyst for NAD(P)H cofactor regeneration was developed using the economical substrate glycerol. This cofactor regeneration system employs permeabilized Escherichia coli cells in which the glpD and gldA genes were deleted and the gpsA gene, which encodes NAD(P)+-dependent glycerol-3-phosphate dehydrogenase, was overexpressed. These manipulations were applied to block a side reaction (i.e., the conversion of glycerol to dihydroxyacetone) and to switch the glpD-encoding enzyme reaction to a gpsA-encoding enzyme reaction that generates both NADH and NADPH. We demonstrated the performance of the cofactor regeneration system using a lactate dehydrogenase reaction as a coupling reaction model. The developed biocatalyst involves an economical substrate, bifunctional regeneration of NAD(P)H, and simple reaction conditions as well as a stable environment for enzymes, and is thus applicable to a variety of oxidoreductase reactions requiring NAD(P)H regeneration.

Hexamerization of Geranylgeranylglyceryl Phosphate Synthase Ensures Structural Integrity and Catalytic Activity at High Temperatures.

The cell membranes of all archaea contain ether lipids, and a number of archaea are hyperthermophilic. Consequently, the enzymes that catalyze the synthesis of membrane ether lipids had to adopt to these rough conditions. Interestingly, the enzyme that establishes the first ether bond in these lipids, the geranylgeranylglyceryl phosphate synthase (GGGPS), forms hexamers in many hyperthermophilic archaea, while also dimeric variants of this enzyme exist in other species. We used Methanothermobacter thermautotrophicus GGGPS (mtGGGPS) as a model to elucidate the benefit of hexamerization. We studied the oligomerization interfaces in detail by introducing disturbing mutations and subsequently compared the stability and activity of generated dimeric and monomeric variants with the wild-type enzyme. Differential scanning calorimetry revealed a biphasic denaturation of mtGGGPS. The temperature of the first transition varies and rises with increasing oligomerization state. This first phase of denaturation leads to catalytic inactivation, but CD spectroscopy indicated only minor changes on the secondary structure level. The residual part of the fold is extremely thermostable and denatures in a second phase at temperatures >120 °C. The analysis of another distant native GGGPS enzyme affirms these observations. Molecular dynamics simulations revealed three structural elements close to the substrate binding sites with elevated flexibility. We assume that hexamerization might stabilize these structures, and kinetic studies support this hypothesis for the binding pocket of the substrate glycerol 1-phosphate. Oligomerization might thus positively affect the thermostability-flexibility trade-off in GGGPS by allowing a higher intrinsic flexibility of the individual protomers.