Substrate-binding Cleft Research Articles

Streptomyces small laccase expressed in Aspergillus Niger as a new addition for the lignocellulose bioconversion toolbox

Laccases are multi-copper oxidases that are usually composed of three Cu-oxidase domains. Domains one and three house the copper binding sites, and the second domain is involved in forming a substrate-binding cleft. However, Streptomyces species are found to have small laccases (SLAC) that lack one of the three Cu-oxidase domains. This type of SLAC with interesting lignocellulose bioconversion activities has not been reported in Aspergillus niger. In our research, we explored the expression and engineering of the SLAC from Streptomyces leeuwenhoekii C34 in A. niger. Genes encoding two versions of the SLAC were expressed. One encoding the SLAC in its native form and a second encoding the SLAC fused to two N-terminal CBM1 domains. The latter is a configuration also known for specific yeast laccases. Both SLAC variants were functionally expressed in A. niger as shown by in vitro activity assays and proteome analysis. Laccase activity was also analyzed toward bioconversion of lignocellulosic rice straw. From this analysis it was clear that the SLAC activity improved the efficiency of saccharification of lignocellulosic biomass by cellulase enzyme cocktails.

Temperature-dependent structural changes in xylanase II from Trichoderma longibrachiatum

Endo-β-1,4-xylanases degrade heteroxylans that constitute the lignocellulosic plant cell wall. This enzyme is widely used in the food, paper, textile, and biorefinery industries. Temperature affects the optimum activity of xylanase and is an important factor in its application. Various structural analyses of xylanase have been performed, but its structural influence by temperature is not fully elucidated. To better understand the structural influence of xylanase due to temperature, the crystal structure of xylanase II from Trichoderma longibrachiatum (TloXynII) at room and cryogenic temperatures was determined at 2.1 and 1.9 Å resolution, respectively. The room-temperature structure of TloXynII (TloXynIIRT) showed a B-factor value 2.09 times higher than that of the cryogenic-temperature structure of TloXynII (TloXynIICryo). Subtle movement of the catalytic and substrate binding residues was observed between TloXynIIRT and TloXynIICryo. In TloXynIIRT, the thumb domain exhibited high flexibility, whereas in TloXynIICryo, the finger domain exhibited high flexibility. The substrate binding cleft of TloXynIIRT was narrower than that of TloXynIICryo, indicating a distinct finger domain conformation. Numerous water molecule networks were observed in the substrate binding cleft of TloXynIICryo, whereas only a few water molecules were observed in TloXynIIRT. These structural analyses expand our understanding of the temperature-dependent conformational changes in xylanase.

Identification of a functional missense variant in the matrix metallopeptidase 10 (MMP10) gene in two families with premature myocardial infarction

A positive family history is a major independent risk factor for atherosclerosis, and genetic variation is an important aspect of cardiovascular disease research. We identified a heterozygous missense variant p.L245P in the MMP10 gene in two families with premature myocardial infarction using whole-exome sequencing. The aim of this study was to investigate the consequences of this variant using in-silico and functional in-vitro assays. Molecular dynamics simulations were used to analyze protein interactions, calculate free binding energy, and measure the volume of the substrate-binding cleft of MMP10-TIMP1 models. The p.L245P variant showed an altered protein surface, different intra- and intermolecular interactions of MMP10-TIMP1, a lower total free binding energy between MMP10-TIMP1, and a volume-minimized substrate-binding cleft of MMP10 compared to the wild-type. For the functional assays, human THP-1 cells were transfected with plasmids containing MMP10 cDNA carrying the p.L245P and wild-type variant and differentiated into macrophages. Macrophage adhesion and migration assays were then conducted, and pro-inflammatory chemokine levels were evaluated. The p.L245P variant led to macrophages that were more adherent, less migratory, and secreted higher levels of the pro-inflammatory chemokines CXCL1 and CXCL8 than wild-type macrophages. Thus, the p.L245P variant in MMP10 may influence the pathogenesis of atherosclerosis in families with premature myocardial infarction by altering protein - protein interactions, macrophage adhesion and migration, and expression of pro-inflammatory chemokines, which may increase plaque rupture. These results could contribute to the development of selective MMP10 inhibitors and reduce the risk of atherosclerosis in families with a history of premature myocardial infarction.

Recognition of a Single β-D-Xylopyranose Molecule by Xylanase GH11 from Thermoanaerobacterium saccharolyticum

The endo-β-1,4-xylanase glycosyl hydrolase (GH11) decomposes the backbone of xylan into xylooligosaccharides or xylose. These enzymes are important for industrial applications in the production of biofuel, feed, food, and value-added materials. β-D-xylopyranose (XYP, also known as β-D-xylose) is the fundamental unit of the substrate xylan, and understanding its recognition is fundamental for the initial steps of GH11’s molecular mechanism. However, little is known about the recognition of a single XYP molecule by GH11. In this study, the crystal structures of GH11 from Thermoanaerobacterium saccharolyticum (TsaGH11) complexed with an XYP molecule were determined at a resolution of 1.7–1.9 Å. The XYP molecule binds to subsite −2 of the substrate-binding cleft. The XYP molecule is mainly stabilized by a π–π interaction with the conserved Trp36 residue. The O2 and O3 atoms of XYP are stabilized by hydrogen bond interactions with the hydroxyl groups of Tyr96 and Tyr192. The conformation of the thumb domain of TsaGH11 does not play a critical role in XYP binding, and XYP binding induces a shift in the thumb domain of TsaGH11 toward the XYP molecule. A structural comparison of TsaGH11 with other GH11 xylanases revealed that the XYP molecule forms π–π stacking with the center between the phenyl and indoline ring of Trp36, whereas the XYP molecule unit from xylobiose or xylotetraose forms π–π stacking with the indoline of Trp36, which indicates that the binding modes of the substrate and XYP differ. These structural results provide a greater understanding of the recognition of XYP by the GH11 family.

Structural Characterization and Physiological Role of Bombyx mori Fibroinase in the Silk Gland Development.

Silkworm is a highly valuable insect that produces silk through secretion by a silk gland. Within this gland, a type of cathepsin L protease called Fibroinase was identified as an enzyme for hydrolyzing the primary components of silk, including fibroin and sericin. Here, we determined the crystal structure of Fibroinase fromBombyx mori at a resolution of 1.56 Å. Comparative structural analysis revealed that Fibroinase adopted a similar structural pattern with papain-type cathepsin, consisting of an N-terminal domain and a C-terminal domain. The interface between the domains forms a substrate-binding cleft, where the E64 inhibitor noncovalently binds in a novel manner. Additionally, computational simulations combined with biochemical analysis allowed us to define the binding mode and inhibition mechanism of physiological inhibitor Bombyx cysteine protease inhibitor (BCPI) with Fibroinase. Moreover, the expression profiles and RNA interference of Fibroinase indicated its critical role in removing silk proteins in the silk gland lumen and the destruction of silk gland tissue during the larval-pupal metamorphosis. These findings enhance our understanding of the structural and biochemical features of Fibroinase and its inhibitors, while also providing evidence for the physiological role of Fibroinase in silk gland development.

PH-Induced structural changes in xylanase GH11 from Thermoanaerobacterium saccharolyticum

Background Glycosyl hydrolase 11 (GH11) xylanase is utilized in various in industrial applications such as baking, fruit juice production, pulp processing, and animal feed. Thermophilic GH11 from Thermoanaerobacterium saccharolyticum (TsaGH11) exhibits maximum activity at acid pH with high catalytic efficiency toward beechwood xylan. TsaGH11 activity is pH dependent, exhibiting relative low hydrolase activity at basic pH. However, the effect of a basic pH environment on the structure of TsaGH11 correlated with enzyme activity remains unknown. To understand pH-dependent activity changes, the crystal structure of TsaGH11 at basic pH was determined and compared with that of TsaGH11 at acid pH. Methods TsaGH11 was crystallized at basic pH of 8.5, and the crystal structure was determined at 1.95 Å resolution. The structure, flexibility, and water molecules of TsaGH11 at pH 8.5 and pH 4.3 were compared. Results The open and closed conformations of TsaGH11 at pH 8.5 are reported. Subtle movements of the side chains of amino acids involved in the substrate-binding cleft and catalytic residues were observed. The overall temperature factor of TsaGH11 at pH 8.5 was higher than that at pH 4.6. The position of water molecules near the catalytic residues in TsaGH11 exhibited variations in different pH environments. Conclusions The structural comparison of TsaGH11 at basic and acidic pH offers valuable insights into the pH-dependent functionality of TsaGH11, enhancing our understanding of these structural alterations.

HadBD dehydratase from Mycobacterium tuberculosis fatty acid synthase type II: A singular structure for a unique function.

Worldwide, tuberculosis is the second leading infectious killer and multidrug resistance severely hampers disease control. Mycolic acids are a unique category of lipids that are essential for viability, virulence, and persistence of the causative agent, Mycobacterium tuberculosis (Mtb). Therefore, enzymes involved in mycolic acid biosynthesis represent an important class of drug targets. We previously showed that the (3R)-hydroxyacyl-ACP dehydratase (HAD) protein HadD is dedicated mainly to the production of ketomycolic acids and plays a determinant role in Mtb biofilm formation and virulence. Here, we discovered that HAD activity requires the formation of a tight heterotetramer between HadD and HadB, a HAD unit encoded by a distinct chromosomal region. Using biochemical, structural, and cell-based analyses, we showed that HadB is the catalytic subunit, whereas HadD is involved in substrate binding. Based on HadBDMtb crystal structure and substrate-bound models, we identified determinants of the ultra-long-chain lipid substrate specificity and revealed details of structure-function relationship. HadBDMtb unique function is partly due to a wider opening and a higher flexibility of the substrate-binding crevice in HadD, as well as the drastically truncated central α-helix of HadD hotdog fold, a feature described for the first time in a HAD enzyme. Taken together, our study shows that HadBDMtb , and not HadD alone, is the biologically relevant functional unit. These results have important implications for designing innovative antivirulence molecules to fight tuberculosis, as they suggest that the target to consider is not an isolated subunit, but the whole HadBD complex.

Comparative Analysis of Room Temperature Structures Determined by Macromolecular and Serial Crystallography

Temperature directly influences the function and structure of proteins. Crystal structures determined at room temperature offer more biologically relevant structural information regarding flexibility, rigidity, and thermal motion than those determined by conventional cryocrystallography. Crystal structures can be determined at room temperature using conventional macromolecular crystallography (MX) or serial crystallography (SX) techniques. Among these, MX may theoretically be affected by radiation damage or X-ray heating, potentially resulting in differences between the room temperature structures determined by MX and SX, but this has not been fully elucidated. In this study, the room temperature structure of xylanase GH11 from Thermoanaerobacterium saccharolyticum was determined by MX (RT-TsaGH11-MX). The RT-TsaGH11-MX exhibited both the open and closed conformations of the substrate-binding cleft within the β-sandwich fold. The RT-TsaGH11-MX showed distinct structural changes and molecular flexibility when compared with the RT-TsaGH11 determined via serial synchrotron crystallography. The notable molecular conformation and flexibility of the RT-TsaGH11-MX may be induced by radiation damage and X-ray heating. These findings will broaden our understanding of the potential limitations of room temperature structures determined by MX.

Carotenoid cleavage enzymes evolved convergently to generate the visual chromophore

The retinal light response in animals originates from the photoisomerization of an opsin-coupled 11-cis-retinaldehyde chromophore. This visual chromophore is enzymatically produced through the action of carotenoid cleavage dioxygenases. Vertebrates require two carotenoid cleavage dioxygenases, β-carotene oxygenase 1 and retinal pigment epithelium 65 (RPE65), to form 11-cis-retinaldehyde from carotenoid substrates, whereas invertebrates such as insects use a single enzyme known as Neither Inactivation Nor Afterpotential B (NinaB). RPE65 and NinaB couple trans–cis isomerization with hydrolysis and oxygenation, respectively, but the mechanistic relationship of their isomerase activities remains unknown. Here we report the structure of NinaB, revealing details of its active site architecture and mode of membrane binding. Structure-guided mutagenesis studies identify a residue cluster deep within the NinaB substrate-binding cleft that controls its isomerization activity. Our data demonstrate that isomerization activity is mediated by distinct active site regions in NinaB and RPE65—an evolutionary convergence that deepens our understanding of visual system diversity.

The biology of insect chitinases and their roles at chitinous cuticles

Chitin is one of the most prevalent biomaterials in the natural world. The chitin matrix formation and turnover involve several enzymes for chitin synthesis, maturation, and degradation. Sequencing of the Drosophila genome more than twenty years ago revealed that insect genomes contain a number of chitinases, but why insects need so many different chitinases was unclear. Here, we focus on insect GH18 family chitinases and discuss their participation in chitin matrix formation and degradation. We describe their variations in terms of temporal and spatial expression patterns, molecular function, and physiological consequences at chitinous cuticles. We further provide insight into the catalytic mechanisms by discussing chitinase protein domain structures, substrate binding, and enzymatic activities with respect to structural analysis of the enzymatic GH18 domain, substrate-binding cleft, and characteristic TIM-barrel structure.

Opportunities and challenges for plastic depolymerization by biomimetic catalysis.

Plastic waste has imposed significant burdens on the environment. Chemical recycling allows for repeated regeneration of plastics without deterioration in quality, but often requires harsh reaction conditions, thus being environmentally unfriendly. Enzymatic catalysis offers a promising solution for recycling under mild conditions, but it faces inherent limitations such as poor stability, high cost, and narrow substrate applicability. Biomimetic catalysis may provide a new avenue by combining high enzyme-like activity with the stability of inorganic materials. Biomimetic catalysis has demonstrated great potential in biomass conversion and has recently shown promising progress in plastic degradation. This perspective discusses biomimetic catalysis for plastic degradation from two perspectives: the imitation of the active centers and the imitation of the substrate-binding clefts. Given the chemical similarity between biomass and plastics, relevant work is also included in the discussion to draw inspiration. We conclude this perspective by highlighting the challenges and opportunities in achieving sustainable plastic recycling via a biomimetic approach.

Characterization and structural analysis of the endo-1,4-β-xylanase GH11 from the hemicellulose-degrading Thermoanaerobacterium saccharolyticum useful for lignocellulose saccharification

Xylanases are important for the enzymatic breakdown of lignocellulose-based biomass to produce biofuels and other value-added products. We report functional and structural analyses of TsaGH11, an endo-1,4-β-xylanase from the hemicellulose-degrading bacterium, Thermoanaerobacterium saccharolyticum. TsaGH11 was shown to be a thermophilic enzyme that favors acidic conditions with maximum activity at pH 5.0 and 70 °C. It decomposes xylans from beechwood and oat spelts to xylose-containing oligosaccharides with specific activities of 5622.0 and 3959.3 U mg−1, respectively. The kinetic parameters, Km and kcat towards beechwood xylan, are 12.9 mg mL−1 and 34,015.3 s−1, respectively, resulting in kcat/Km value of 2658.7 mL mg−1 s−1, higher by 102–103 orders of magnitude compared to other reported GH11s investigated with the same substrate, demonstrating its superior catalytic performance. Crystal structures of TsaGH11 revealed a β-jelly roll fold, exhibiting open and close conformations of the substrate-binding site by distinct conformational flexibility to the thumb region of TsaGH11. In the room-temperature structure of TsaGH11 determined by serial synchrotron crystallography, the electron density map of the thumb domain of the TsaGH11 molecule, which does not affect crystal packing, is disordered, indicating that the thumb domain of TsaGH11 has high structural flexibility at room temperature, with the water molecules in the substrate-binding cleft being more disordered than those in the cryogenic structure. These results expand our knowledge of GH11 structural flexibility at room temperature and pave the way for its application in industrial biomass degradation.

Common scab disease: structural basis of elicitor recognition in pathogenic Streptomyces species.

In Streptomyces scabiei, the main causative agent of common scab disease of root and tuber crops, the interaction between the substrate-binding protein (SBP) CebE (CebEscab) and cellotriose released by the plant host (KD in the nanomolar range) is the first event for the onset of its pathogenic lifestyle. Here, we report the structure of CebEscab in complex with cellotriose at a resolution of 1.55 Å, adopting a general fold of the B subcluster of SBPs. The interaction between CebEscab and cellotriose involves multiple direct or water-mediated hydrogen bonds and hydrophobic interactions, with the glucose monomer at the non-reducing end occupying the most conserved part of the substrate-binding cleft. As main interactions between the two domains of CebE involve cellotriose itself, the closed conformational state of CebE is performed via an induced-fit ligand binding mechanism where cellotriose binding triggers the domain movement. Analysis of regulon predictions revealed that the signaling pathway from CebE-mediated cellotriose transport to the transcriptional activation of thaxtomin phytotoxin biosynthesis is conserved in Streptomyces spp. causing common scab, except for Streptomyces ipomoeae, which specifically colonizes sweet potatoes and responds to other and yet unknown virulence elicitors. Interestingly, strains belonging to the pathogenic species turgidiscabies and caniscabiei have a cellotriose-binding protein orthologous to the CebE protein of the saprophytic species Streptomyces reticuli with lower affinity for its substrate (KD in the micromolar range), suggesting higher cellotriose concentrations for perception of their host. Our work also provides the structural basis for the uptake of cellobiose and cellotriose by non-pathogenic cellulose-decomposing Streptomyces species.IMPORTANCECommon scab is a disease caused by a few Streptomyces species that affects important root and tuber crops including potato, beet, radish, and parsnip, resulting in major economic losses worldwide. In this work, we unveiled the molecular basis of host recognition by these pathogens by solving the structure of the sugar-binding protein CebE of Streptomyces scabiei in complex with cellotriose, the main elicitor of the pathogenic lifestyle of these bacteria. We further revealed that the signaling pathway from CebE-mediated transport of cellotriose is conserved in all pathogenic species except Streptomyces ipomoeae, which causes soft rot disease in sweet potatoes. Our work also provides the structural basis of the uptake of cellobiose and cellotriose in saprophytic Streptomyces species, the first step activating the expression of the enzymatic system degrading the most abundant polysaccharide on earth, cellulose.

Sen1 architecture: RNA-DNA hybrid resolution, autoregulation, and insights into SETX inactivation in AOA2

The senataxin (SETX, Sen1 in yeasts) RNA-DNA hybrid resolving helicase regulates multiple nuclear transactions, including DNA replication, transcription, and DNA repair, but the molecular basis for Sen1 activities is ill defined. Here, Sen1 cryoelectron microscopy (cryo-EM) reconstructions reveal an elongated inchworm-like architecture. Sen1 is composed of an amino terminal helical repeat Sen1 N-terminal (Sen1N) regulatory domain that is flexibly linked to its C-terminal SF1B helicase motor core (Sen1Hel) via an intrinsically disordered tether. In an autoinhibited state, the Sen1Sen1N domain regulates substrate engagement by promoting occlusion of the RNA substrate-binding cleft. The X-ray structure of an activated Sen1Hel engaging single-stranded RNA and ADP-SO4 shows that the enzyme encircles RNA and implicates a single-nucleotide power stroke in the Sen1 RNA translocation mechanism. Together, our data unveil dynamic protein-protein and protein-RNA interfaces underpinning helicase regulation and inactivation of human SETX activity by RNA-binding-deficient mutants in ataxia with oculomotor apraxia 2 neurodegenerative disease.

Molecular mechanism for endo-type action of glycoside hydrolase family 55 endo-β-1,3-glucanase on β1-3/1-6-glucan

The glycoside hydrolase family 55 (GH55) includes inverting exo-β-1,3-glucosidases and endo-β-1,3-glucanases, acting on laminarin, which is a β1-3/1-6-glucan consisting of a β1-3/1-6-linked main chain and β1-6-linked branches. Despite their different modes of action toward laminarin, endo-β-1,3-glucanases share with exo-β-1,3-glucosidases conserved residues that form the dead-end structure of subsite-1. Here, we investigated the mechanism of endo-type action on laminarin by GH55 endo-β-1,3-glucanase MnLam55A, identified from Microdochium nivale. MnLam55A, like other endo-β-1,3-glucanases, degraded internal β-d-glucosidic linkages of laminarin, producing more reducing sugars than the sum of d-glucose and gentiooligosaccharides detected. β1-3-Glucans lacking β1-6-linkages in the main chain were not hydrolyzed. NMR analysis of the initial degradation of laminarin revealed that MnLam55A preferentially cleaved the nonreducing terminal β1-3-linkage of the laminarioligosaccharide moiety at thereducing end side of the main chain β1-6-linkage. MnLam55A liberates d-glucose from laminaritriose and longer laminarioligosaccharides, but kcat/Km values to laminarioligosaccharides (≤4.21s-1mM-1) were much lower than to laminarin (5920s-1mM-1). These results indicate that β-glucan binding to the minus subsites of MnLam55A, including exclusive binding of the gentiobiosyl moiety to subsites-1 and-2, is required for high hydrolytic activity. A crystal structure of MnLam55A, determined at 2.4 Å resolution, showed that MnLam55A adopts an overall structure and catalytic site similar to those of exo-β-1,3-glucosidases. However, MnLam55A possesses an extended substrate-binding cleft that is expected to form the minus subsites. Sequence comparison suggested that other endo-type enzymes share the extended cleft. The specific hydrolysis of internal linkages in laminarin is presumably common to GH55 endo-β-1,3-glucanases.

SPOP Mutations Target STING1 Signaling in Prostate Cancer and Create Therapeutic Vulnerabilities to PARP Inhibitor-Induced Growth Suppression.

Speckle-type POZ protein (SPOP) is important in DNA damage response (DDR) and maintenance of genomic stability. Somatic heterozygous missense mutations in the SPOP substrate-binding cleft are found in up to 15% of prostate cancers. While mutations in SPOP predict for benefit from androgen receptor signaling inhibition (ARSi) therapy, outcomes for patients with SPOP-mutant (SPOPmut) prostate cancer are heterogeneous and targeted treatments for SPOPmut castrate-resistant prostate cancer (CRPC) are lacking. Using in silico genomic and transcriptomic tumor data, proteomics analysis, and genetically modified cell line models, we demonstrate mechanistic links between SPOP mutations, STING signaling alterations, and PARP inhibitor vulnerabilities. We demonstrate that SPOP mutations are associated with upregulation of a 29-gene noncanonical (NC) STING (NC-STING) signature in a subset of SPOPmut, treatment-refractory CRPC patients. We show in preclinical CRPC models that SPOP targets and destabilizes STING1 protein, and prostate cancer-associated SPOP mutations result in upregulated NC-STING-NF-κB signaling and macrophage- and tumor microenvironment (TME)-facilitated reprogramming, leading to tumor cell growth. Importantly, we provide in vitro and in vivo mechanism-based evidence that PARP inhibitor (PARPi) treatment results in a shift from immunosuppressive NC-STING-NF-κB signaling to antitumor, canonical cGAS-STING-IFNβ signaling in SPOPmut CRPC and results in enhanced tumor growth inhibition. We provide evidence that SPOP is critical in regulating immunosuppressive versus antitumor activity downstream of DNA damage-induced STING1 activation in prostate cancer. PARPi treatment of SPOPmut CRPC alters this NC-STING signaling toward canonical, antitumor cGAS-STING-IFNβ signaling, highlighting a novel biomarker-informed treatment strategy for prostate cancer.

Discovery and rational engineering of PET hydrolase with both mesophilic and thermophilic PET hydrolase properties

Excessive polyethylene terephthalate (PET) waste causes a variety of problems. Extensive research focused on the development of superior PET hydrolases for PET biorecycling has been conducted. However, template enzymes employed in enzyme engineering mainly focused on IsPETase and leaf-branch compost cutinase, which exhibit mesophilic and thermophilic hydrolytic properties, respectively. Herein, we report a PET hydrolase from Cryptosporangium aurantiacum (CaPETase) that exhibits high thermostability and remarkable PET degradation activity at ambient temperatures. We uncover the crystal structure of CaPETase, which displays a distinct backbone conformation at the active site and residues forming the substrate binding cleft, compared with other PET hydrolases. We further develop a CaPETaseM9 variant that exhibits robust thermostability with a Tm of 83.2 °C and 41.7-fold enhanced PET hydrolytic activity at 60 °C compared with CaPETaseWT. CaPETaseM9 almost completely decompose both transparent and colored post-consumer PET powder at 55 °C within half a day in a pH-stat bioreactor.

Allosteric communication between ACE2 active site and binding interface with SARS-CoV-2.

SARS-CoV-2, the virus causing COVID-19, initiates cell invasion by deploying a receptor binding domain (RBD) to recognize the host transmembrane peptidase angiotensin-converting enzyme 2 (ACE2). Numerous experimental and theoretical studies have adopted high-throughput and structure-guided approaches to (i) understand how the RBD recognizes ACE2, (ii) rationalize, and (iii) predict the effect of viral mutations on the binding affinity. Here, we investigate the allosteric signal triggered by the dissociation of the ACE2-RBD complex. To this end, we construct an Elastic Network Model (ENM), and we use the Structural Perturbation Method (SPM). Our key result is that complex dissociation opens the ACE2 substrate-binding cleft located away from the interface and that fluctuations of the ACE2 binding cleft are facilitated by RBD binding. These and other observations provide a structural and dynamical basis for the influence of SARS-CoV-2 on ACE2 enzymatic activity. In addition, we identify a conserved glycine (G502 in SARS-CoV-2) as a key participant in complex disassembly.

In vitro selection of macrocyclic peptide inhibitors containing cyclic γ2,4-amino acids targeting the SARS-CoV-2 main protease

γ-Amino acids can play important roles in the biological activities of natural products; however, the ribosomal incorporation of γ-amino acids into peptides is challenging. Here we report how a selection campaign employing a non-canonical peptide library containing cyclic γ2,4-amino acids resulted in the discovery of very potent inhibitors of the SARS-CoV-2 main protease (Mpro). Two kinds of cyclic γ2,4-amino acids, cis-3-aminocyclobutane carboxylic acid (γ1) and (1R,3S)-3-aminocyclopentane carboxylic acid (γ2), were ribosomally introduced into a library of thioether-macrocyclic peptides. One resultant potent Mpro inhibitor (half-maximal inhibitory concentration = 50 nM), GM4, comprising 13 residues with γ1 at the fourth position, manifests a 5.2 nM dissociation constant. An Mpro:GM4 complex crystal structure reveals the intact inhibitor spans the substrate binding cleft. The γ1 interacts with the S1′ catalytic subsite and contributes to a 12-fold increase in proteolytic stability compared to its alanine-substituted variant. Knowledge of interactions between GM4 and Mpro enabled production of a variant with a 5-fold increase in potency.

Molecular and biochemical characterization of a recombinant glycosyl hydrolase family 3 β-glucosidase overexpressed in Escherichia. coli; bioprospecting metagenomes for cellulolytic processing function

Enzyme activity on a synthetic substrate (p-nitrophenyl-β-D-glucopyranoside (pNPG)) ranked by specificity (kcat/Km), placed Bgl-3 (a recombinant P. carotovorum subsp. carotovorum-ß-glucosidase expressed in Escherichia coli) in a group of ß-glucosidases, whereas ranking according to turnover number (kcat) placed Bgl-3 at the top of the group, implying its potential for high activity in biomass processing. The role of Lys211, His212, Arg172, and Asp114, in substrate recognition and stabilization of a glucose unit in catalysis is proposed here due to interactions with the substrate C1-C6 hydroxyls through hydrogen bonding, as well as the role of two methionines, Met255, Met322, in hydrophobic stabilization. However, enzyme inactivation due to ion pair dissociation, at pH range >8 and <5, of the enzyme nucleophile and the acid-base, can influence enzyme-intermediate complex formation, suggesting the latter as rate limiting in Bgl3 catalysis. Asp290 and Glu517 in the substrate binding clefts, are the nucleophile and the catalytic acid/base suggested, respectively. The close proximity of His212 and His522 stabilizes the enzyme glycosyl-intermediate through hydrogen bonding.