Tray Research Articles

Au/Nb2O5 terahertz-gigahertz electro-optical filters designed for high frequency applications

Abstract Herein enhanced broad band filters are fabricated by deposing thin films of Nb2O5 onto glass and semitransparent Au nanosheets using the ion coating technique. Remarkable enhancement in the surface roughness of the films and in the visible and infrared light absorption by more than 270 % and 750%, respectively, is achieved by coating the films onto Au nanosheets. Au nanosheets redshifted the energy band gap and initiated the free carrier absorption in the Nb2O5 films. As terahertz band filters, Au/Nb2O5 interfaces exhibited higher dielectric constant, higher optical conductivity and higher terahertz cutoff frequency values. Au/Nb2O5 optical filters showed terahertz resonator characteristics displaying six resonance modes two, three and one of which are dominant in the infrared, visible and ultraviolet ranges, respectively. On the other hand the impedance spectroscopy analyses for Au/Nb2O5/Au (ANA) filter showed microwave resonator characteristics with cutoff frequency values reaching 700 GHz for signal carriers of driving frequency of 1.65 GHz. ANA devices exhibited negative capacitance effect in a wide range of driving frequency domain. The features of the Au/Nb2O5 films demonstrate their potential for use as gigahertz-terahertz broad band electro-optical resonators suitable for high frequency applications.

Design and optimization of hexagonal tungsten ring metasurface perfect absorbers with circuit model

In this paper, a perfect absorber (PA) based on tungsten is proposed to include hexagonal‐shaped metasurface absorbers with varying hole sizes ranging from quadrangular to circular, allowing them to cover a wide wavelength spectrum. The study investigates the effects of various parameters, including the number of sides of the inner hole, on the absorber's performance and identifies the most suitable absorber by introducing an equivalent circuit. The outcomes of full‐wave numerical simulations primarily based on the finite element method (FEM) highly correspond to the final results of the circuit model. Additionally, the circuit model significantly reduces computation time and requires less storage compared with full‐wave simulations. The results show that the hexagonal‐square metasurface absorber achieves exceptional absorption rates, with an average of 99.9% in the 431 to 532 nm wavelength range and over 90% in the 300 to 915 nm range. The hexagonal‐hexagonal metasurface absorber also exhibits high absorption rates, with an average of over 99% in the 431 to 518 nm and 700 to 780 nm ranges, and over 90% in the 300 to 940 nm range. The absorption performance of the proposed hexagonal‐circle metasurface absorber is also remarkable, with an absorption value of over 99% in the 670 to 771 nm range and above 90% in the 365 to 991 nm range. These models can be utilized to design and simulate other subwavelength absorbers in a broad frequency range, including terahertz and visible light, making them suitable for various applications.

Enhancement of terahertz emission from aqueous NaCl solutions

Exploration of terahertz sources with high electric fields and broad bandwidth is of great importance for terahertz application. In this work, the enhancement of terahertz emission from aqueous NaCl solutions induced by femtosecond laser pulses has been demonstrated by experiments. The power of the terahertz wave emission from the NaCl solution with a concentration of 30% is 1.86 times stronger than that from liquid water under equivalent excitation conditions. By means of a liquid circulation system with accurate pressure and temperature control, the influence of parameters such as solution concentration, liquid temperature, and medium size on the terahertz emission has been investigated. According to the experiment results, strong terahertz pulses are radiated from NaCl solutions with higher concentration, higher temperature, and smaller diameter. In addition, the physical mechanisms responsible for strong terahertz radiation have been analyzed by actual measurements and numerical simulations.

Total cross-polarization conversion and polarization-sensitive amplification of terahertz radiation in graphene with direct electric current

Total cross-polarization conversion and polarization-sensitive amplification of terahertz radiation in graphene with direct electric current

Single-cycle, 643 mW average power terahertz source based on tilted pulse front in lithium niobate

We present the highest, to the best of our knowledge, average power from a laser-driven single-cycle THz source demonstrated so far, using optical rectification in the tilted pulse front geometry in cryogenically cooled lithium niobate, pumped by a commercially available 500 W ultrafast thin-disk ytterbium (Yb) amplifier. We study repetition rate-dependent effects in our setup at 100 and 40 kHz at this high average power, revealing different optimal fluence conditions for efficient conversion. The demonstrated sources with multi-100 mW average power at these high repetition rates combine high THz pulse energies and high repetition rate and are thus ideally suited for nonlinear THz spectroscopy experiments with significantly reduced measurement times. The presented result is a first benchmark for high average power THz time-domain spectroscopy systems for nonlinear spectroscopy, driven by very high average power ultrafast Yb lasers.

Theoretical Models for Performance Analysis of Spintronic THz Emitters

The terahertz (THz) region of the electromagnetic spectrum, spanning from 0.1 to 10 THz, offers unique opportunities for imaging, spectroscopy, and communication applications. However, the potential of THz technologies has been limited by the availability of efficient and versatile THz emitters. Spintronic THz emitters (STEs), leveraging the ultrafast dynamics of electron spins in magnetic materials, have emerged as a promising solution to this challenge. STEs offer significant advantages, including broad bandwidth, high power output, and room-temperature operation, positioning them at the forefront of THz technology development. Despite these advances, understanding the operational principles and improving the performance of STEs remain areas of active research. This review focuses on the theoretical models that describe the behavior of STEs, aiming to provide a comprehensive overview of the underlying physics and suggest directions for future enhancements. Through a detailed examination of these models, the review seeks to clarify the basics of the physics driving STE performance and highlight innovative strategies for their optimization and application expansion.

Stretchable terahertz metasurface based on laser induced graphene for contactless deformation sensing

In this paper, a 1D stretchable terahertz (THz) metasurface based on laser-induced graphene (LIG) for deformation sensing is developed with low cost, good sensitivity and robustness. After the LIG metasurface is fabricated by laser-direct writing on a polyimide film, it is divided into columns and bonded to a medical polyurethane (PU) tape, thus endowed with high elasticity due to the excellent flexibility of PU. Because LIG supports surface plasmon polaritons in the THz band, a plasmonic resonance is introduced in the reflection spectrum and red shifts with lateral stretching. Experimental results show that the device can realize a resonant frequency shift of 336 GHz at a deformation of 0-14 mm, and the linearity reaches 0.988, achieving a sensitivity of 24 GHz/mm and excellent robustness (>1000 repetitions). The LIG-based stretchable THz sensor has great application potential for contactless deformation sensing in aerospace, industrial manufacturing, and related fields.

Graphene Terahertz Devices for Sensing and Communication.

Graphene-based terahertz (THz) devices have emerged as promising platforms for a variety of applications, leveraging graphene's unique optoelectronic properties. This review explores recent advancements in utilizing graphene in THz technology, focusing on two main aspects: THz molecular sensing and THz wave modulation. In molecular sensing, the environment-sensitive THz transmission and emission properties of graphene are utilized for enabling molecular adsorption detection and biomolecular sensing. This capability holds significant potential, from the detection of pesticides to DNA at high sensitivity and selectivity. In THz wave modulation, crucial for next-generation wireless communication systems, graphene demonstrates remarkable potential in absorption modulation when gated. Novel device structures, spectroscopic systems, and metasurface architectures have enabled enhanced absorption and wave modulation. Furthermore, techniques such as spatial phase modulation and polarization manipulation have been explored. From sensing to communication, graphene-based THz devices present a wide array of opportunities for future research and development. Finally, advancements in sensing techniques not only enhance biomolecular analysis but also contribute to optimizing graphene's properties for communication by enabling efficient modulation of electromagnetic waves. Conversely, developments in communication strategies inform and enhance sensing capabilities, establishing a mutually beneficialrelationship.

Multiwavelength Observations of Sgr A*. II. 2019 July 21 and 26

We report on the final two days of a multiwavelength campaign of Sgr A* observing in the radio, submillimeter, infrared (IR), and X-ray bands in 2019 July. Sgr A* was remarkably active, showing multiple flaring events across the electromagnetic spectrum. We detect a transient ∼35 minute periodicity feature in Spitzer light curves on 2019 July 21. Time-delayed emission was detected in Atacama Large Millimeter/submillimeter Array light curves, suggesting a hotspot within the accretion flow on a stable orbit. On the same night, we observe a decreased flux in the submillimeter light curve following an X-ray flare detected by Chandra, and we model the feature with an adiabatically expanding synchrotron hotspot occulting the accretion flow. The event is produced by a plasma 0.55 R S in radius with an electron spectrum p = 2.84. It is threaded by a ∼130 Gauss magnetic field and expands at 0.6% the speed of light. Finally, we reveal an unambiguous flare in the IR, submillimeter, and radio, demonstrating that the variable emission is intrinsically linked. We jointly fit the radio and submillimeter light curves using an adiabatically expanding synchrotron hotspot and find it is produced by a plasma with an electron spectrum p = 0.59, 187 Gauss magnetic field, and radius 0.47 R S that expands at 0.029c. In both cases, the uncertainty in the appropriate lower and upper electron energy bounds may inflate the derived equipartition field strengths by a factor of 2 or more. Our results confirm that both synchrotron- and adiabatic-cooling processes are involved in the variable emission’s evolution at submillimeter and IR wavelengths.

Potentiality of graphene as a base material for impact ionization avalanche transit time diode in high-frequency applications

In this paper, the microwave application potential of graphene is studied using a double-drift-region (DDR) impact ionization avalanche transit time (IMPATT) diode. The simulation of this diode is carried out for the very first time at several different atmospheric window frequencies. Because graphene has unique and special properties, it could be used to make electronic gadgets for the next generation. The device is simulated at a variety of millimeter and sub-millimeter wave frequencies using a model called self-consistent drift diffusion (SCDD), which was developed by the author based on current continuity, Poisson’s equation and space charge equation. When compared to traditional IMPATT devices such as Si, GaAs, InP and GaP, the results demonstrate superior performance in terms of efficiency, and RF power across a wide range of operating conditions. Again, the behavior of noise in graphene IMPATT is studied, and it is found that it makes less noise than Si and GaAs IMPATT. The simulation results open up new avenues for IMPATT diode manufacture and design.

Enhanced terahertz radiation generated by intense laser interaction with a two-layer thin solid target

Enhanced terahertz radiation generated by intense laser interaction with a two-layer thin solid target

Circularly polarized plane terahertz waves radiated from a resonant tunneling diode integrated with a collimating metalens and quarter-wave plate

Terahertz flat optics based on metasurfaces can replace massive optical components with optically thin components. However, metasurfaces with unprecedented material properties frequently produce a specified function, and terahertz flat optics has yet to be commonly adopted in terahertz devices that require multiple functions. Here, we present a two-layer component composed of a collimating metalens and a quarter-wave plate that convert linearly polarized terahertz wide-angle radiation waves from a resonant tunneling diode to circularly polarized plane waves. Our findings would be applied to laminate structures with optical vortices, ultrahigh directivity and arbitrary wavefront control in 6 G wireless communications.

Tunable terahertz filter based on graphene photonic crystals with defective layers

In this paper, we design a high-precision tunable terahertz filter by using transfer matrix method. The filter structure mainly consists of graphene embedded photonic crystals (GPCs). The front part of the GPCs contains artificial synthetic material and air layer, the back part of the GPCs is composed by and periodic stack of isotropic dielectric slabs (MgF2) embedded with graphene sheets, where air defect layer is located in the middle of the GPC as a central layer. Our simulation reveals that graphene layer and air defective layer strongly affect the filter performance. And we can get a relatively pure transmission peak in a wide frequency region. Additionally, the influence of incidence angle of terahertz wave, thickness of air layer, the unit number of front periodic structure and chemical potential of the graphene sheets can also modulate the function of the filter. And the filter has strong stability when the temperature changes from 150 K to 350 K.The results indicate that single channel, dual and multiple channels filter in a narrow frequency can be obtained by optimizing the structure parameter.

Design of an Optimized Terahertz Time-Domain Spectroscopy System Pumped by a 30 W Yb:KGW Source at a 100 kHz Repetition Rate with 245 fs Pulse Duration

Ytterbium laser sources are state-of-the-art systems that are increasingly replacing Ti:Sapphire lasers in most applications requiring high repetition rate pulse trains. However, extending these laser sources to THz Time-Domain Spectroscopy (THz-TDS) poses several challenges not encountered in conventional, lower-power systems. These challenges include pump rejection, thermal lensing in nonlinear media, and pulse durations exceeding 100 fs, which consequently limit the detection bandwidth in TDS applications. In this article, we describe our design of a THz-TDS beamline that seeks to address these issues. We report on the effectiveness of temperature controlling the Gallium Phosphide (GaP) used to generate the THz radiation and its impact on increasing the generation efficiency and aiding pump rejection while avoiding thermal distortions of the residual pump laser beam. We detail our approach to pump rejection, which can be implemented with off-the-shelf products and minimal customization. Finally, we describe our solution based on a commercial optical parametric amplifier to obtain a temporally compressed probe pulse of 55 fs duration. Our study will prove useful to the increasing number of laboratories seeking to move from the high-energy, low-power THz time-domain spectroscopy systems based on Ti:Sapphire lasers, to medium-energy, high-power systems driven by Yb-doped lasers.

Coherent terahertz wave generation from mono- and multi-layer MoS2 through quantum interference

Coherent terahertz wave generation from mono- and multi-layer MoS2 through quantum interference

Electron density measurement of Ar, N2, O2, and Ar mixtures (with N2 and O2) gas in inductively coupled plasma (ICP) using terahertz time domain spectroscopy

In this study, an inspection method using terahertz waves was proposed for the diagnosis of electron density using inductively coupled plasma (ICP). Plasma with low and high electron density for Ar, N2, O2, and Ar mixed (with N2 and O2) gases was generated by varying the RF power of the ICP and mass flow rate. Based on the theoretical analysis about propagation characteristics of the THz waves in Ar, N2, O2, and Ar mixed (with N2 and O2) gas plasma, the electron density of the ICP was measured according to RF power and mass flow rate. These results were verified using a Langmuir probe that can measure the electron density distribution.

Terahertz metamaterials for spectrum modulation: structural design, materials and applications

Metamaterials, an artificial electromagnetic (EM) material, have exhibited unique characteristics, enabling innovations in terahertz (THz) wavefront shaping, polarization modulation, surface wave manipulation, and spectrum modulation. In this review, we focus on the advancements in THz metamaterials for spectrum modulation, emphasizing their structural design, special materials, and applications. The review discusses various structural designs, including metal-dielectric composite structures, all-metal structures, and all-dielectric structures, each offering distinct advantages for THz applications. Key special materials such as graphene, vanadium dioxide (VO2), molybdenum disulfide (MoS2), and flexible materials are highlighted for their significant contributions to enhancing the performance and functionality of THz metamaterials. The applications of THz metamaterials in EM stealth and sensing are thoroughly introduced, with a particular focus on biosensing, pesticide detection, and other sensing applications. The review emphasizes the potential of THz metamaterials in developing highly sensitive and selective sensors, as well as efficient THz absorbers and filters. Future perspectives include the continuous development of novel materials, advanced fabrication technologies, and the integration of multifunctional capabilities to further expand the applications and efficiency of THz metamaterials. These advancements are expected to drive significant progress in THz technology, impacting fields such as medical diagnostics, environmental monitoring, food safety, wireless communication, and security.

Concealed hazardous object detection for terahertz images with cross-feature fusion transformer

Terahertz (THz) waves can penetrate many non-metallic materials (such as paper, plastic, and clothing), making them highly valuable in security inspection areas. However, the low contrast between target objects and the background in THz images poses problems for object detection and recognition tasks. Though many schemes have been proposed to tackle the problems, the low detection accuracy and high computational complexity remain challenges. To address these challenges, we propose a concealed hazardous object detection method called Cross-Feature Fusion Transformer YOLO (CFT-YOLO) for THz images. We design a Multi-Channel Spatial Feature Module (MCSFM) to achieve cross-channel and cross-spatial information transfer between feature maps. MCSFM also realizes the feature parameter transfer between the backbone and neck of the network. Additionally, we develop a CrossFuse-Transformer (CF-Former) module that leverages self-attention to fully exploit the correlations and structural information between different feature maps. We conduct a series of experiments on public datasets. The results show that CFT-YOLO outperforms the other advanced methods in THz hazardous object detection tasks. Moreover, the CFT-YOLO achieves a better balance between model complexity and detection accuracy compared to YOLOv8s, making it more practical for real-world applications.

Overcoming High-Quality Limitations in Plasmonic Metasurfaces for Ultrasensitive Terahertz Applications.

In photonics, achieving high-quality (Q) resonance is crucial for high-sensitivity devices used in applications, such as switching, sensing, and lasing. However, high-Q resonances are highly susceptible to internal losses of plasmonic devices, impeding their integration into broader systems across terahertz and visible light bands. Here, we overcome this challenge by proposing a low-Q plasmonic metasurface for ultrasensitive terahertz (THz) switching and sensing. Theoretically, we reveal an approach to constructing a low-Q resonator possessing high sensitivity to nonradiative losses. Leveraging this mechanism, we design a highly sensitive plasmonic metasurface induced by strong coupling between a quasi-bound state in the continuum and a dipole mode. By hybridizing with the germanium layer, the metadevice exhibits an ultralow pump threshold of 192 μJ/cm2 and an ultrafast switching cycle time of 7 ps. Furthermore, it also shows a high sensitivity of 224 GHz/RIU in refractive index sensing. The proposed paradigm of constructing low-Q and high-sensitivity photonic devices can be applied to biosensing, wide-band filters, and sensitive modulators.

Spatial and temporal thermal management of a spintronic terahertz emitter

Abstract This work presents methods for addressing undesirable thermal effects induced by the pump beam of an oscillator laser to improve the efficiency of a terahertz (THz) spintronic emitter (STE). We explore two approaches: spatial distribution of pump energy using a 2D lens array and temporal modulation of the pump duty cycle. Optimizing the spatial distribution approximately doubles the THz signal by increasing local heat dissipation, delaying the saturation limit. Similarly, temporal spreading of pump pulses by adjusting the duty cycle allows greater thermal relaxation within the heterostructure, enhancing the overall efficiency of THz wave generation.