Style Of Deformation Research Articles

Seismic radial anisotropy in southeastern Tibetan Plateau and its implications for regional geodynamic evolution

The southeastern Tibetan Plateau exhibits intricate crustal tectonics, encompassing recent seismic megathrust events. Previous research suggested the presence of north-south-oriented channelized viscous flow within the crust. However, recent investigations have unveiled a notable northeast-southwest-oriented geological structure, potentially rigid, intersecting with the presumed crustal channelized flow. Several questions persist regarding the composition of the northeast-southwest-oriented structure, the continuity of crustal channelized flow, and the interplay between them. In this study, dispersion data from a dense seismic array are employed to significantly refine regional crustal models for shear wave velocity and radial anisotropy through ambient noise tomography. The resulting high-resolution model further reveals the style of the crustal deformation and supports the interpretation that the northeast-southwest structure, which shows higher velocity and significant negative radial anisotropy, results from mafic material at the base of crust, obstructing the crustal channelized flow. However, the northeast-southwest structure is not as rigid as the Sichuan Block and exhibits depth-dependent deformation. The interpretation proves useful in further understanding regional earthquake focal mechanisms and strain distribution. Additionally, this research identified a region of generalized negative radial anisotropy in the crust of the western Chuan-Dian fragment, suggesting a reduced horizontal channel crustal flow in this area. Drawing upon various geophysical and geological evidence, we present a geodynamic evolution model, proposing a sequence of events: Permian plume activity resulting in mafic material at the base of the crust near Anninghe-Zemuhe fault, northward advancement of the east Himalayan syntaxis inducing crustal compressional stress field, reduced lower crustal channel flow in the western Chuan-Dian fragment leading to the regional east-west extension, and initiation of the Xianshuihe fault causing shift of strain concentration and depth-dependent deformation near the Anninghe-Zemuhe fault. The geodynamic model provides valuable insights into the regional distribution of crustal strain and the underlying mechanisms of large seismic events.

Geology of the Golobar and Rumaceo faults, Basque-Cantabrian Pyrenees

ABSTRACT The lateral transition between different styles of deformation is crucial for understanding local-scale structures since it influences orogenic reconstructions at the crustal scale. This is especially important at the westernmost Basque-Cantabrian Pyrenees, where the transition from the thin-skinned Basque-Cantabrian Pyrenees to the thick-skinned Cantabrian Mountains remains a subject of debate. To address this, detailed geological mapping and proper fault characterisation are critical. This research focused on the surface characterisation of the Golobar Fault System, one of the faults located at the transition between the two styles of deformation. The results of this study include not only a detailed geological map of the Golobar Fault System but also its integration with neighbouring seismic sections and well data. This approach enhances the understanding of the deeper portions and lateral thickness variations, thereby providing a more comprehensive understanding of the Golobar area within the regional framework.

Modulation of Deformation by Magmatic Tempo, Coast Mountains Batholith, British Columbia, Canada

AbstractThe tectonomagmatic evolution of the southern Coast Mountains batholith, British Columbia reveals the relation of magmatic tempo, deformation, and relative plate motions which inform models for growth of continental crust and convergent plate dynamics. Magmatism in the southern batholith is episodic, derived primarily from the mantle, and reflects lower‐plate dynamics (Cecil et al., 2018, https://doi.org/10.1029/2018gc007874, 2021, https://doi.org/10.1130/ges02361.1). New field, structural, geochronologic, and geobarometric results from the southern batholith document three episodes of deformation, each spatially and temporally coincident with a high magmatic flux event (HFE). Sinistral faulting (<117–103 Ma) and penetrative deformation (110–90 Ma) occurred only within two distinct areas affected by a HFE at 114–102 Ma. Following a magmatic lull, crustal shortening occurred after 90 Ma and before 72 Ma within the region affected by a second HFE (85–70 Ma). After 70 Ma and before 53 Ma, >100 km of dextral slip occurred on the Coast shear zone and minor shortening affected 64–62 Ma plutons, overlapping with the 64–61 Ma HFE. Thus, at the crustal level exposed in the southern batholith, the timing and location of deformation is linked to magmatic tempo and the style of deformation varies through time. These results suggest that magmatic HFE modulate the timing and location of deformation while relative plate motions during HFE influence the style of deformation. Periods of deformation in batholiths may thus record high‐flux magmatic events and coeval plate motion but do not necessarily signal changes in plate motions.

Strain Partitioning in a Flattening Shear Zone: Re-Evaluation of a Cycladic Style Detachment.

The Almyropotamos tectonic window on southern Evia island in the NW Aegean Sea divides two high pressure-low temperature metamorphic units, representing distinct Hellenic thrust sheets. Ductile thinning along the major low-angle Evia Shear Zone has closely juxtaposed the lower (Basal Unit) marble-flysch sequence structurally below Styra marbles (Cycladic Blueschist Unit). The partially attenuated flysch comprises a matrix dominated by pelitic schist, with dispersed cm- to hm-scale blocks of marble, carbonate schist, quartzite, and metabasite. Structural investigation of the different lithotypes in the flysch reveals tectonic fabrics related to general flattening strain are developed most strongly in the pelitic matrix, whereas the compositionally diverse blocks exhibit differential preservation of older structures. Quartz c-axis distributions from quartz veins in the schists reflect an early, moderate temperature plane strain deformation. Colder deformation is evident in some pelitic schists, capturing Z-centered girdles consistent with the oblate finite strain ellipsoid inferred from macroscopic structures. New in situ 40Ar/39Ar and 87Rb/87Sr geochronology delineate the timing of the two deformation events. Geochronological data reaffirm the first-order observations of strain partitioning behavior at the scale of the shear zone, and confirm that the structure records two resolvable tectonometamorphic events: an early Oligocene HP-LT event, and a late Oligocene-early Miocene greenschist facies overprint coinciding with ductile thinning. The diffuse and discontinuous style of deformation recorded within the shear zone is unusual for major structures facilitating exhumation in the Aegean Sea, and may represent an analogue to mélange-hosted shear zones that accommodate progressive strain during subduction.

Strain Localization at Volcanoes Undergoing Extension: Investigation of Long‐Term Deformation at Krafla and Askja Volcanic Systems in North Iceland

AbstractVolcanoes in extensional environments may show gradual subsidence over decades during quiescent periods, due to various processes such as magma withdrawal, cooling, contraction, plate spreading and viscoelastic response. If significant rheological anomalies reside in volcano roots, due to the presence of magma and hot rock, they can influence the style of deformation. We use Finite Element Method (FEM) models to explore how strain localization due to extension can lead to volcano deflation. We apply rheological models comprising an elastic layer overlying a viscoelastic domain and include local up‐doming regions of low viscosity material beneath volcanic centers. The models reveal a localized subsidence above the rheological anomaly, influenced by the tectonic extension, and by the up‐doming volume and its viscosity. The models suggest that plate divergence may account for 4–5 mm/yr of observed subsidence at Krafla and Askja volcanic systems (KVS and AVS, respectively) in North Iceland.

Ductile Versus Brittle Tectonics in the Anatolian–Aegean–Balkan System

It is hypothesized that the present tectonic setting of the Anatolian, Aegean and Balkan regions has been deeply influenced by the different deformation styles of the inner and outer belts which constituted the Oligocene Tethyan system. Stressed by the Arabian indenter, this buoyant structure has undergone a westward escape and strong bending. The available evidence suggests that in the Plio–Pleistocene time frame, the inner metamorphic core mainly deformed without undergoing major fragmentations, whereas the orogenic belts which flanked that core (Pontides, Balkanides, Dinarides and Hellenides) behaved as mainly brittle structures, undergoing marked fractures and fragmentations. This view can plausibly explain the formation of the Eastern (Crete–Rhodes) and Western (Peloponnesus) Hellenic Arcs, the peculiar time-space features of the Cretan basins, the development of the Cyprus Arc, the North Aegean strike-slip fault system, the southward escapes of the Antalya and Peloponnesus wedges and the complex tectonic setting in the Balkan zone. These tectonic processes have mostly developed since the late Late Miocene, in response to the collision of the Tethyan belt with the Adriatic continental domain, which accelerated the southward bending of the Anatolian and Aegean sectors, at the expense of the Levantine and Ionian oceanic domains. The proposed interpretation may help us to understand the connection between the ongoing tectonic processes and the spatio-temporal distribution of major earthquakes, increasing the chances of estimating the long-term seismic hazard in the study area. In particular, it is suggested that seismic activity in the Serbo–Macedonian zone may be favored by the post-seismic relaxation that develops after seismic crises in the Epirus thrust front and inhibited/delayed by the activations of the North Anatolian fault system.

The Permian to late Triassic magmatic evolution of SW Pangea: Reconciling evidence from Patagonia and the Antarctic Peninsula

The geodynamic setting across the Paleozoic to Mesozoic transition in Patagonia and the Antarctic Peninsula (SW Pangea) has been strongly debated. Hypotheses of terrane accretion, episodes of shallower to flattened subduction, long-lived stages of crustal extension, or even subduction arrest have been variably proposed. We have compiled and re-evaluated the available whole-rock geochemistry and zircon Hf-isotope data for Permian to Triassic rocks from Patagonia and the Antarctic Peninsula, and compared these findings with the orogenic events in these regions.We have identified that two orogenic cycles occurred along the SW margin of Pangea during the Permian-Triassic interval, namely the Gondwanide and Chonide/Peninsula orogenies. Both orogenies coexisted with the development of magmatic arcs; the Permian arc exhibits an overall I-type signature that switched to A-type towards ca. 252 Ma, whereas the Triassic arc has an S-type signature in the Antarctic Peninsula and intraplate features in Patagonia. The Hf isotope data for zircon exhibit broadly subchondritic values, suggesting significant crustal contribution in the magmatic source during both cycles. The short- and long-term temporal behavior of the isotopic trends suggests variations that may be attributable to the participation of primitive and/or evolved sources. We conclude that the geochemical and isotopic signatures of the magmas, together with different styles of crustal deformation, resulted from the interaction of the upper and lower plates, consistent with the evolution of an accretionary-type margin along SW Pangea during Permian and Triassic times.

Investigating the influence of climate on the evolution of fold-and-thrust belts in Chinese Tianshan: A 2D doubly vergent numerical model approach

In most analogue and numerical modelling studies for investigating the evolutionary mechanisms of fold-and-thrust belts, the initial models are typically designed as “sandboxes” with one side fixed in the horizontal direction. However, such model setup has neglected the potential effects of drainage divide migration. To address this issue, in this study we developed a 2D doubly vergent numerical model that accounts for drainage divide migration to investigate the structural evolution in Tianshan fold-and-thrust belts since the late Cenozoic, with an emphasis on the influences of climatic forcing on rock deformation. The deformation styles of northern and southern Tianshan fold-and-thrust belts exhibit significant differences, with the northern Tianshan fold-and-thrust belt characterized by deep isoclinal anticlines, whereas the southern Tianshan fold-and-thrust belts are dominated by thrust faults and minor shallow-level tight anticlines. Our modelling results suggest that such differences in deformation style may be attributed to the north–south precipitation gradient across Tianshan mountain. The results also show that unilateral climatic perturbations can lead to migration of the drainage divides towards the side with lower precipitation, thereby impacting the structural evolution on the opposite side of the mountain range. Such impact mainly manifests as an increased tendency to develop more thrust faults in the direction toward which the drainage divide is shifting. This provides a new perspective for reevaluating the patterns of tectonic evolution in the global orogenic belts since the late Cenozoic.

Mineralogy and Geochemistry of Upper Miocene Igneous Rocks, Kos Island, Greece: Extension during Strike-Slip Faulting and Subduction Rollback

Upper Miocene volcanic and plutonic rocks on Kos island preserve a record of magmatic and tectonic events in the transition zone between the Aegean and Anatolian microplates. Their field setting, syn-intrusion deformation, mineralogy, and geochemistry were investigated. Volcanic rocks, including trachyandesite flows and trachyandesite to rhyolite domes, were extruded on a central E–W horst and directly overlie Alpine basement. Thick successions of trachytic flow tuffs are interbedded with fluvial and lacustrine basinal sediments to the south of this horst. Volcanism was synchronous with the emplacement of the Dikeos monzonite pluton, which is geochemically similar to some lithic clasts in the thick flow tuffs and is cut by mafic dykes including lamprophyres. Two main types of mafic magma were present: a K-rich lamprophyric magma that evolved to trachyandesite and more calc-alkaline magma similar to mafic enclaves in the monzonite. Syn-intrusion structures in the monzonite indicate emplacement during E–W sinistral strike-slip faulting that created local transtensional deformation, providing accommodation for a Dikeos magma reservoir. A change in the style of deformation in the Late Miocene led to NW-striking extension in the footwall, occupied by mafic dykes and mineralized veins, and extensional detachment of the hanging wall, resulting in unroofing of the monzonite.

Structural style & kinematic analysis of deformation in the northern Dezful Embayment, Zagros Fold-Thrust Belt, SW Iran

A comprehensive understanding of structure and kinematic characteristics of fold and thrust belts provides significant information for hydrocarbon exploration and production. The kinematic evolution and structural style of three subsurface oilfields, Zeloi, Lali and Karun, in the northern part of the Dezful Embayment, a significant petroleum province of the Zagros Fold-Thrust Belt in SW Iran, were investigated using 2D seismic data. Interpretation of the 2D seismic profiles with up to 5 km depth consisting of upper Jurassic to Pleistocene sediments and the balanced cross-sections constructed revealed diverse geometries and kinematics along the oilfields. These results demonstrate that the structural style of the oilfields was controlled by the Gachsaran and Dashtak formations as upper and middle detachment levels, respectively. Tear faults affected the along-strike variations in structural style of the oilfields. Based on the analysis of growth strata, folding evolved as limbs rotated and hinges migrated, beginning in the mid-Miocene. During the later stages of deformation, the initial detachment folds transformed into fault-bend folds.

Detachment and Transfer Fault Systems in the Northern South China Sea, Insights Into 3D Tectonic Segmentation of Rifted Margins

AbstractThe 2D rifting modes interpreted in traditional “magma‐poor” and “magma‐rich” margins cannot explain the crustal structure and inferred rifting processes in the northern South China Sea (SCS) rifted margin. The “intermediate‐type” terminology has been therefore applied to the mid‐northern SCS, where a “wide‐rift” model has been widely accepted. However, the tectono‐magmatic processes of the SCS are still debated and at least five contrasting models exist. We present a compilation of 3‐D seismic volumes and regional 2‐D seismic surveys covering the entire Baiyun and Liwan Sub‐basins to investigate their tectonic structure and faulting style in this “wide‐rift” region. We interpret two segments with contrasting tectonic styles separated by a volcanic lineament and steep transfer faults. The Baiyun Sub‐basin was controlled by a landward‐dipping detachment system. The Liwan Sub‐basin, however, was formed by a ∼100 km‐long oceanward‐dipping, concave‐up detachment fault working at a low angle of <10°. The lateral boundaries of the detachment system were mechanically decoupled from surrounding tectonics by a volcanic lineament/transfer zone to the west and a > 190 km‐long N‐S‐trending left‐lateral strike‐slip fault to the east. The planar low‐angle detachment does not resemble classical metamorphic core complex domes interpreted previously. Our results indicate a 60‐80 km‐wavelength segmentation within a single “wide‐rift” system, indicating complex 3D rifting during crustal extension. This study supports that the intermediate SCS margin had a kinematically complex deformation style locally dominated by the interaction between detachment and transfer fault systems that might be yet unrecognized in other margins.

Modeling mobile shales under contraction: Critical analyses of new analog simulations of shale tectonics and comparison with salt-bearing systems

Weak substrates, such as salt and mobile shales, exert a strong control on deformation styles in all structural settings, especially those undergoing contraction. Despite both materials being very weak, they are mechanically very different. Salt is weak and will flow in a ductile fashion under most geologic conditions, whereas shales only become mobile after reaching a critical state. Many sandbox-style physical or analog modeling studies have typically used a salt analog, viscous silicone polymer, as a proxy for mobile shales. However, to more accurately model mobile shale behavior, the model material needs to exhibit yield strength. One such material is Carbopol, which is made up of microgel grains that are elasto-plastic, separated by a viscous interstitial fluid. The abundance of the grains depends on the concentration of the mixture. Our results show that Carbopol does behave much differently than the traditional salt analog during contraction. Polydimethylsiloxanes typically undergoes bulk deformation and inflation under contraction, whereas Carbopol forms discrete, intense shear zones and contains zones of little to no strain where its yield strength has not been exceeded. Below the shale analog, brittle layers typically form imbricate thrust stacks, jacking up the overburden, with shear zones propagating out from thrust tips along and through the shale proxy. Strain analyses reveal complex switching of activity within the Carbopol and overlying sediments. Models reveal that even a very thin layer of Carbopol can act as a highly efficient detachment, and form more geologically realistic shortening structures, especially where these detachments are vertically stacked and horizontally offset. We believe that Carbopol is a powerful mobile-shale analog and opens new modeling directions because, as far as we are aware, this material has never been incorporated into a traditional sandbox model. Future work will seek to incorporate this material into more complex and 3D sandbox-style models.

Damage asymmetry of the Chimei Fault, eastern Taiwan, and implications for deformation evolution

The mesoscale deformation structures in eastern Taiwan are considered to have recorded progressive deformation during rapid convergence and uplift in response to arc-continent collision. However, detailed deformation mechanisms and kinematic history of faulting remained poorly known. The Chimei Fault in eastern Taiwan thrusts the igneous forearc basement over the orogen-derived turbidites, and its outcrops provide opportunities to understand deformation mechanisms of the fault rocks across a bi-material fault during the arc-continent collision. To unravel the structural and mechanical architecture of the Chimei Fault, we performed field observations, paleostress analysis, and fold analysis. The Chimei Fault shows a fault core surrounded by damage zones. The width of the damage zones across the fault core is asymmetric, with the footwall turbidites exhibiting wider damage zone with higher fracture intensity than the hanging wall andesitic complex. Our paleostress analysis reveals that the mechanically stronger hanging wall can accommodate larger differential stress than the weaker footwall. Different deformation styles in the footwall damage zones, including pinch-and-swell structures, boudins, and postdating fractures, suggesting progressive deformation while sediment lithification in response to the activities of the Chimei Fault.

Fault rock structure-related stiffness contrast explains earthquakes in creeping faults

Abstract Fault rocks exhibit structures resulting from different styles of shear deformation (either distributed or localized) during fault displacement. However, how the fault rock structures affect fault slip behavior remains poorly understood. We conducted shear experiments on thick and thin gouge layers of various mineral compositions, which simulate the predominant development of velocity-strengthening distributed deformation zones and velocity-weakening shear localized zones, respectively. Here, we show that deformation zones with contrasting structures and frictional properties can be developed together in a single fault. If the rheological stiffness of shear localization zones in the fault exceeds the elastic stiffness of neighboring wall rocks, stick-slip can intermittently occur along the localization zones while stable slip persists in the distributed deformation zones. These findings suggest that contrasting rheological stiffnesses resulting from fault rock structures may induce the simultaneous operation of multiple slip modes in a fault and explain the occurrence of earthquakes in creeping faults.

Deep-seated crustal faults and their role in the thermo-tectonic evolution of an active mountain belt: New evidence from the Northern Andes

Deep-seated structures can exhume deep crustal rocks (>20 km), transmitting the signal of geodynamic processes from the subduction zone to the interiors of the continents. The role of deep-seated structures can be analyzed with low-temperature thermochronological dating techniques. However, studies coupling low-temperature thermochronology with structural geological analyses of the deformational style are not common in the Northern Andes. In this contribution, we present new apatite (AFT) and zircon (ZFT) fission-track data coupled with meso- and microstructural analyses to reveal the deformational and exhumation history of the Santander Massif (SM; Northern Andes) and the related cortical Bucaramanga strike-slip fault (BF). Samples for thermochronological analyses were collected along an elevation profile with a significant elevation difference of 2.4 km across the western flank of the SM, crossing the BF. The time-temperature history modeling of ZFT data reveals phases of prolonged residence in the zircon partial annealing zone from ∼125 to 94 Ma and a cooling phase related to an exhumation episode at around 25 Ma based on samples collected near the BF. Inverse modeling of AFT data reveals structurally-controlled Pliocene exhumation rates of 0.6–0.7 km/Myr mediated by the action of secondary faults. A shift in the deformation style resulting from the oblique interaction of the SM and Mérida Andes domain is interpreted as the main driver of the Pliocene exhumation. This deformation phase is observed in the fault damage zone, where evidence of brittle-ductile deformation was exhumed. Finally, we discuss the geodynamic implications of our thermochronological and structural analyses, contrasting local and more regional competing hypotheses (Pamplona Indenter vs. slab break-off of the Caribbean plate), which may explain the tectonic evolution of the northern part of the Eastern Cordillera and the SM in the Colombian Northern Andes.

Convex-up Style of Deformation within Grabens in Regions of Incomplete Crossing Conjugate Normal Faults: A Numerical Simulation Investigation and Case Study

Convex-up Style of Deformation within Grabens in Regions of Incomplete Crossing Conjugate Normal Faults: A Numerical Simulation Investigation and Case Study

Kinematic Evolution of the Santa Bárbara System in the Foreland of the Central Andes of Northwestern Argentina (26°S)

AbstractCompared to the thin‐skinned Subandean foreland fold‐and‐thrust belt of northern Argentina and Bolivia, the tectonically active morphotectonic province of the Santa Bárbara System in the Andean broken foreland of northwestern Argentina is characterized by a temporally and spatially disparate deformation style. Although there is no well‐defined orogenic deformation front associated with the uplift of these basement‐cored, reverse‐fault bounded mountain ranges, there has been an overall eastward trend in Andean compressional deformation since the Miocene. While reactivation of basement anisotropies, such as early Paleozoic metamorphic fabrics and Cretaceous normal faults, has been proposed to have profoundly affected deformation processes in the Santa Bárbara System, other mechanisms involving Mesozoic and Cenozoic cover rocks may also have played an important role in orogenic deformation in this sector of the Andean foreland. We present structural field observations, interpretations of seismic reflection profiles, and kinematic modeling from the basins bordering the Candelaria Range in the southern sector of the Santa Bárbara System at 26°S. Our analysis features a 110‐km‐long structural cross section that images and links deep‐seated structures with shallow neotectonic faults. We find that regional shortening has been facilitated by several faults associated with a regional detachment at a depth of 23 km, resulting in total horizontal shortening of about 17% (18.4 km). While the deep‐seated first‐order structures seem closely linked to seismogenic processes in the Andean foreland, shallow second‐order structures within the sedimentary cover modify the intermontane landscapes and appear to be associated with aseismic creep.

Structural Inheritance in the Eastern Cordillera, NW Argentina: Low‐Temperature Thermochronology of the Cianzo Basin

AbstractThe present‐day deformation style of the Eastern Cordillera in NW Argentina is strongly influenced by the inversion of pre‐existing Paleozoic and Mesozoic structures. In particular, the extensional faults and lithological contrasts resulting from the Cretaceous–Paleogene Salta Rift phase form heterogeneities that were preferentially reactivated during the Andean orogeny. Constraining the timing and characteristics of reactivation is a key to understanding the interplay between tectonics and inherited crustal anisotropies. In this study, we combine structural and sedimentological field data with a low‐temperature thermochronology data set from the area surrounding the fault‐bounded Cianzo basin. The southeastern boundary is formed by the inverted Hornocal fault, which was the basin‐bounding normal fault of the Lomas de Olmedo sub‐basin (Salta Rift basin). Lacustrine deposits of the Yacoraite Formation overspill on the footwall of this fault and mark tectonic quiescence during the post‐rift phase of the Salta Rift. Apatite (U‐Th‐Sm)/He and fission track ages in the Hornocal fault hanging wall show an onset of rapid cooling interpreted to be concomitant with fault inversion between the latest Oligocene and middle Miocene (∼24–15 Ma). Low‐temperature thermochronology data also constrain the timing of major folding in the eastern limb of the Cianzo syncline to pre‐10 Ma, whereas the western limb started tilting post‐10 Ma. Characterization of exhumation patterns related to fault activity surrounding the Cianzo basin emphasizes the influence of the pre‐existing structural framework on deformation in fold‐and‐thrust belts.

Neotectonics on the Namuncurá (Burdwood) Bank: unveiling seafloor strike-slip processes along the North Scotia Ridge

The North Scotia Ridge is the offshore morphostructural expression of the left-lateral transcurrent South America–Scotia plate boundary. Several blocks make up the ridge, including the scarcely studied Namuncurá Bank (also known as the Burdwood Bank). We present the first detailed study of active structures on the seafloor of the western Namuncurá Bank from a database of 3D and 2D seismic data, multibeam bathymetry and sub-bottom profiles. This work assesses the architecture, style of deformation and Cenozoic evolution of Namuncurá Bank, where several groups of faults and en echelon folding affect the seabed and shallow sub-bottom. These features compound the northernmost structures associated with a releasing bend, fitting well with a left-lateral Riedel shear model oriented at N74°E, slightly rotated with respect to the present day plate boundary stress regime. The current tectonic scenario started with a main deformational phase in the Neogene, partially distributed by the Malvinas fold–thrust belt, while modern deformation continues to be conditioned by pre-existing structures. This study allows a better understanding of the tectonics of the North Scotia Ridge, a morphostructure that influences the circulation of the Antarctic Circumpolar Current, thus impacting the global climate.

Oligocene and Miocene blowtorch volcanism within the California Borderland and its influence on the plate-boundary transition

Abstract The California Borderland is a uniquely broad and complex region of the North American–Pacific transform margin. Oligocene to Miocene structural reorganization, including large-magnitude extension and vertical-axis rotation of crustal blocks, formed a network of submerged fault-bounded basins, ridges, and islands offshore of southern California during its evolution from a convergent to transform boundary. Here, we report new 40Ar/39Ar incremental heating age determinations and geochemical analyses of volcanic rocks in the California Borderland, as well as a reconciled regional tectonic model. The California Borderland volcanic rocks are calc-alkaline in composition and mostly silica-oversaturated and represent relatively large-degree partial melts of the asthenosphere that incorporated hydrated forearc lithospheric components. A temporal reconciliation of these records shows that subduction of an active spreading center starting in the Oligocene and again in the Miocene was the critical control on the observed volcanism at ca. 31–30 Ma and 19–13 Ma. We posit that prolonged trench-ridge interaction generated a blowtorch effect, which resulted in widespread forearc volcanism and weakening of the crust to facilitate the unique deformation styles documented in the borderland that did not occur elsewhere along the North American–Pacific plate boundary.