Structure Of Glycoside Hydrolase Family Research Articles

Novel β-galactosidase activity and first crystal structure of Glycoside Hydrolase family 154

Polysaccharide Utilization Loci (PULs) are physically linked gene clusters conserved in the Gram-negative phylum of Bacteroidota and are valuable sources for Carbohydrate Active enZyme (CAZyme) discovery. This study focuses on BD-β-Gal, an enzyme encoded in a metagenomic PUL and member of the Glycoside Hydrolase family 154 (GH154). BD-β-Gal showed exo-β-galactosidase activity with regiopreference for hydrolyzing β-d-(1,6) glycosidic linkages. Notably, it exhibited a preference for d-glucopyranosyl (d-Glcp) over d-galactopyranosyl (d-Galp) and d-fructofuranosyl (d-Fruf) at the reducing end of the investigated disaccharides. In addition, we determined the high resolution crystal structure of BD-β-Gal, thus providing the first structural characterization of a GH154 enzyme. Surprisingly, this revealed an (α/α)6 topology, which has not been observed before for β-galactosidases. BD-β-Gal displayed low structural homology with characterized CAZymes, but conservation analysis suggested that the active site was located in a central cavity, with conserved E73, R252, and D253 as putative catalytic residues. Interestingly, BD-β-Gal has a tetrameric structure and a flexible loop from a neighboring protomer may contribute to its reaction specificity. Finally, we showed that the founding member of GH154, BT3677 from Bacteroides thetaiotaomicron, described as β-glucuronidase, displayed exo-β-galactosidase activity like BD-β-Gal but lacked a tetrameric structure.

In-Depth Characterization of Debranching Type I Pullulanase from Priestia koreensis HL12 as Potential Biocatalyst for Starch Saccharification and Modification

Pullulanase is an effective starch debranching enzyme widely used in starch saccharification and modification. In this work, the biochemical characteristics and potential application of a new type I pullulanase from Priestia koreensis HL12 (HL12Pul) were evaluated and reported for the first time. Through in-depth evolutionary analysis, HL12Pul was classified as type I pullulanase belonging to glycoside hydrolase family 13, subfamily 14 (GH13_14). HL12Pul comprises multi-domains architecture, including two carbohydrate-binding domains, CBM68 and CBM48, at the N-terminus, the TIM barrel structure of glycoside hydrolase family 13 (GH13) and C-domain. Based on sequence analysis and experimental cleavage profile, HL12Pul specifically hydrolyzes only α-1,6 glycosidic linkage-rich substrates. The enzyme optimally works at 40 °C, pH 6.0, with the maximum specific activity of 181.14 ± 3.55 U/mg protein and catalytic efficiency (kcat/Km) of 49.39 mL/mg·s toward pullulan. In addition, HL12Pul worked in synergy with raw starch-degrading α-amylase, promoting raw cassava starch hydrolysis and increasing the sugar yield by 2.9-fold in comparison to the α-amylase alone in a short reaction time. Furthermore, HL12Pul effectively produces type III-resistant starch (RSIII) from cassava starch with a production yield of 70%. These indicate that HL12Pul has the potential as a biocatalyst for starch saccharification and modification.

Crystal structure of glycoside hydrolase family 31 α-xylosidase from a soil metagenome.

MeXyl31, a member of glycoside hydrolase family 31 (GH31), is the α-xylosidase isolated from a soil metagenomic library. The enzyme degrades α-xylosyl substrate such as isoprimeverose, α-d-xylopyranosyl-(1→6)-glucopyranose. The crystal structure of MeXyl31 was determined at 1.80 Å resolution. MeXyl31 forms the tetrameric state. The complexed structure with a xylose in the-1 subsite (α-xylose binding site) shows that the enzyme strictly recognizes α-xylose. Structural comparison between MeXyl31 and its homologue, Aspergillus niger α-xylosidase in GH31, gave insights into the positive subsite of MeXyl31. First, in the tetrameric enzyme, two monomers (a catalytic monomer and the adjacent monomer), are involved in substrate recognition. Second, the adjacent monomer composes a part of positive subsites in MeXyl31. Docking simulation and site-directed mutagenesis suggested that the Arg100 from the adjacent monomer is partially involved in the recognizing of a glucopyranose of isoprimeverose.

Crystal structures of glycoside hydrolase family 136 lacto-N-biosidases from monkey gut- and human adult gut bacteria.

Glycoside hydrolase family 136 (GH136) was established after the discovery and structural analysis of lacto-N-biosidase (LNBase) from the infant gut bacterium Bifidobacterium longum subsp. longum JCM1217 (BlLnbX). Homologous genes of BlLnbX are widely distributed in the genomes of human gut bacteria and monkey Bifidobacterium spp., although only 2 crystal structures were reported in the GH136 family. Cell suspensions of Bifidobacterium saguini, Tyzzerella nexilis, and Ruminococcus lactaris exhibited the LNBase activity. Recombinant LNBases of these 3 species were functionally expressed with their specific chaperones in Escherichia coli, and their kinetic parameters against p-nitrophenol substrates were determined. The crystal structures of the LNBases from B. saguini and T. nexilis in complex with lacto-N-biose I were determined at 2.51 and 1.92 Å resolutions, respectively. These structures conserve a β-helix fold characteristic of GH136 and the catalytic residues, but they lack the metal ions that were present in BlLnbX.

Modeled 3D-Structures of Proteobacterial Transglycosylases from Glycoside Hydrolase Family 17 Give Insight in Ligand Interactions Explaining Differences in Transglycosylation Products

The structures of glycoside hydrolase family 17 (GH17) catalytic modules from modular proteins in the ndvB loci in Pseudomonas aeruginosa (Glt1), P. putida (Glt3) and Bradyrhizobium diazoefficiens (previously B. japonicum) (Glt20) were modeled to shed light on reported differences between these homologous transglycosylases concerning substrate size, preferred cleavage site (from reducing end (Glt20: DP2 product) or non-reducing end (Glt1, Glt3: DP4 products)), branching (Glt20) and linkage formed (1,3-linkage in Glt1, Glt3 and 1,6-linkage in Glt20). Hybrid models were built and stability of the resulting TIM-barrel structures was supported by molecular dynamics simulations. Catalytic amino acids were identified by superimposition of GH17 structures, and function was verified by mutagenesis using Glt20 as template (i.e., E120 and E209). Ligand docking revealed six putative subsites (−4, −3, −2, −1, +1 and +2), and the conserved interacting residues suggest substrate binding in the same orientation in all three transglycosylases, despite release of the donor oligosaccharide product from either the reducing (Glt20) or non-reducing end (Glt1, Gl3). Subsites +1 and +2 are most conserved and the difference in release is likely due to changes in loop structures, leading to loss of hydrogen bonds in Glt20. Substrate docking in Glt20 indicate that presence of covalently bound donor in glycone subsites −4 to −1 creates space to accommodate acceptor oligosaccharide in alternative subsites in the catalytic cleft, promoting a branching point and formation of a 1,6-linkage. The minimum donor size of DP5, can be explained assuming preferred binding of DP4 substrates in subsite −4 to −1, preventing catalysis.

The first crystal structure of a glycoside hydrolase family 17 β-1,3-glucanosyltransferase displays a unique catalytic cleft.

β-1,3-Glucanosyltransferase (EC 2.4.1.-) plays an important role in the formation of branched glucans, as well as in cell-wall assembly and rearrangement in fungi and yeasts. The crystal structures of a novel glycoside hydrolase (GH) family 17 β-1,3-glucanosyltransferase from Rhizomucor miehei (RmBgt17A) and the complexes of its active-site mutant (E189A) with two substrates were solved at resolutions of 1.30, 2.30 and 2.27 Å, respectively. The overall structure of RmBgt17A had the characteristic (β/α)8 TIM-barrel fold. The structures of RmBgt17A and other GH family 17 members were compared: it was found that a conserved subdomain located in the region near helix α6 and part of the catalytic cleft in other GH family 17 members was absent in RmBgt17A. Instead, four amino-acid residues exposed to the surface of the enzyme (Tyr135, Tyr136, Glu158 and His172) were found in the reducing terminus of subsite +2 of RmBgt17A, hindering access to the catalytic cleft. This distinct region of RmBgt17A makes its catalytic cleft shorter than those of other reported GH family 17 enzymes. The complex structures also illustrated that RmBgt17A can only provide subsites -3 to +2. This structural evidence provides a clear explanation of the catalytic mode of RmBgt17A, in which laminaribiose is released from the reducing end of linear β-1,3-glucan and the remaining glucan is transferred to the end of another β-1,3-glucan acceptor. The first crystal structure of a GH family 17 β-1,3-glucanosyltransferase may be useful in studies of the catalytic mechanism of GH family 17 proteins, and provides a basis for further enzymatic engineering or antifungal drug screening.

Active Site and Laminarin Binding in Glycoside Hydrolase Family 55

The Carbohydrate Active Enzyme (CAZy) database indicates that glycoside hydrolase family 55 (GH55) contains both endo- and exo-β-1,3-glucanases. The founding structure in the GH55 is PcLam55A from the white rot fungus Phanerochaete chrysosporium (Ishida, T., Fushinobu, S., Kawai, R., Kitaoka, M., Igarashi, K., and Samejima, M. (2009) Crystal structure of glycoside hydrolase family 55 β-1,3-glucanase from the basidiomycete Phanerochaete chrysosporium. J. Biol. Chem. 284, 10100-10109). Here, we present high resolution crystal structures of bacterial SacteLam55A from the highly cellulolytic Streptomyces sp. SirexAA-E with bound substrates and product. These structures, along with mutagenesis and kinetic studies, implicate Glu-502 as the catalytic acid (as proposed earlier for Glu-663 in PcLam55A) and a proton relay network of four residues in activating water as the nucleophile. Further, a set of conserved aromatic residues that define the active site apparently enforce an exo-glucanase reactivity as demonstrated by exhaustive hydrolysis reactions with purified laminarioligosaccharides. Two additional aromatic residues that line the substrate-binding channel show substrate-dependent conformational flexibility that may promote processive reactivity of the bound oligosaccharide in the bacterial enzymes. Gene synthesis carried out on ∼30% of the GH55 family gave 34 active enzymes (19% functional coverage of the nonredundant members of GH55). These active enzymes reacted with only laminarin from a panel of 10 different soluble and insoluble polysaccharides and displayed a broad range of specific activities and optima for pH and temperature. Application of this experimental method provides a new, systematic way to annotate glycoside hydrolase phylogenetic space for functional properties.

Crystal Structure of Glycoside Hydrolase Family 9 Endoglucanase with an N-Terminal Ig-Like Domain Isolated from Leaf-Branch Compost

Cellulase degrades glycosidic bonds of cellulose and is widely used for industrial purposes. Ten genes encoding novel cellulases, termed LC-CelA∼J, were isolated from leaf-branch compost by a metagenomic approach. Of them, LC-CelG, which is a member of glycoside hydrolase family 9 cellulases and contain an N-terminal immunoglobulin-like (Ig-like) domain, was overproduced in E. coli, purified, and characterized. LC-CelG consists of 577 amino acid residues. LC-CelG exhibited the highest activity at 70°C and pH 7.0. The crystal structure of LC-CelG was determined at 2.15A resolution. This structure resembles those of Clostridium thermocellum Cel9A (PDB: 1CLC), and contains two Ca2+ and one Zn2+ ions. Two conserved residues, Q40 and D99, in the Ig-like domain form hydrogen bonds and salt bridges respectively with the catalytic domain. To analyze the role of these interactions, two single (Q40A-CelG and D99A-CelG) and one double (Q40A/D99A-CelG) mutant proteins were constructed. The deletion mutant, ΔIg-CelG, which lacks the Ig-like domain, was also constructed. The far-UV CD spectra of these mutant proteins suggest that the structure of LC-CelG is not significantly changed by these mutations and deletion. Q40A-CelG and D99A-CelG were nearly as stable as LC-CelG, whereas Q40A/D99A-CelG and ΔIg-CelG were less stable than LC-CelG by 9.2 and 12.2°C respectively. This result suggests that Q40 and D99 cooperatively contribute to the stabilization of LC-CelG and removal of the Q40- and D99-mediated interactions is the main reason why LC-CelG is destabilized by deletion of the Ig-like domain. ΔIg-CelG was inactive at any temperature examined, whereas other mutants were as active as LC-CelG at ≤60°C, suggesting that the Ig-like domain is required for substrate binding or to make the conformation of the active site functional.

The crystal structure of acidic β-galactosidase from Aspergillus oryzae

The crystal structure of the industrially important Aspergillus oryzae β-galactosidase has been determined at 2.60Å resolution. The Ao-β-gal is a large (985 residues) monomeric multi-domain enzyme that has a catalytic (α/β)8-barrel domain. An electron density map revealed extensive N-glycosylation between the domain interfaces suggesting that the oligosaccharide-chains would have a stabilizing role for the structure of Ao-β-gal. Comparison of structure with other β-galactosidase structures of glycoside hydrolase family 35 revealed a number of hydrophobic residues, which may contribute favorably to the stabilization of the structure. The role of a high number of acidic residues in Ao-β-gal is also discussed.

Crystal structures of glycoside hydrolase family 3 β-glucosidase 1 from Aspergillus aculeatus

GH3 (glycoside hydrolase family 3) BGLs (β-glucosidases) from filamentous fungi have been widely and commercially used for the supplementation of cellulases. AaBGL1 (Aspergillus aculeatus BGL1) belongs to the GH3 and shows high activity towards cellooligosaccharides up to high degree of polymerization. In the present study we determined the crystal structure of AaBGL1. In addition to the substrate-free structure, the structures of complexes with glucose and various inhibitors were determined. The structure of AaBGL1 is highly glycosylated with 88 monosaccharides (18 N-glycan chains) in the dimer. The largest N-glycan chain comprises ten monosaccharides and is one of the largest glycans ever observed in protein crystal structures. A prominent insertion region exists in a fibronectin type III domain, and this region extends to cover a wide surface area of the enzyme. The subsite +1 of AaBGL1 is highly hydrophobic. Three aromatic residues are present at subsite +1 and are located in short loop regions that are uniquely present in this enzyme. There is a long cleft extending from subsite +1, which appears to be suitable for binding long cellooligosaccharides. The crystal structures of AaBGL1 from the present study provide an important structural basis for the technical improvement of enzymatic cellulosic biomass conversion.

Crystal Structure of Glycoside Hydrolase Family 78 α- L-Rhamnosidase from Bacillus sp. GL1

α- L-Rhamnosidase (EC 3.2.1.40) catalyzes the hydrolytic release of rhamnose from polysaccharides and glycosides. Bacillus sp. GL1 α- L-rhamnosidase (RhaB), a member of glycoside hydrolase (GH) family 78, is responsible for degrading the bacterial biofilm gellan, and also functions as a debittering agent for citrus fruit in the food and beverage industries through the release of rhamnose from plant glycoside, naringin. The X-ray crystal structure of RhaB was determined by single-wavelength anomalous diffraction using a selenomethionine derivative and refined at 1.9 Å resolution with a final R-factor of 18.2%. As is seen in the homodimeric form of the active enzyme, the structure of RhaB in crystal packing is a homodimer containing 1908 amino acids (residues 3–956), 43 glycerol molecules, four calcium ions, and 1755 water molecules. The overall structure consists of five domains, four of which are β-sandwich structures designated as domains N, D1, D2, and C, and an (α/α) 6-barrel structure designated as domain A. Structural comparison by DALI showed that RhaB shares its highest level of structural similarity with chitobiose phosphorylase ( Z score of 25.3). The structure of RhaB in complex with the reaction product rhamnose (inhibitor constant, K i = 1.8 mM) was also determined and refined at 2.1 Å with a final R-factor of 19.5%. Rhamnose is bound to the deep cleft of the (α/α) 6-barrel domain, as is seen in the clan-L GHs. Several negatively charged residues, such as Asp567, Glu572, Asp579, and Glu841, conserved in GH family 78 enzymes, interact with rhamnose, and RhaB mutants of these residues have drastically reduced enzyme activity, indicating that the residues are crucial for enzyme catalysis and/or substrate binding. To our knowledge, this is the first report on the determination of the crystal structure of α- L-rhamnosidase and identification of its clan-L (α/α) 6-barrel as a catalytic domain.