Structural Stability Research Articles

Mechanically and Electrically Stable Hybrid Aerogels as Free‐Standing Anodes for High‐Capacity Lithium‐Ion Battery

Molybdenum disulfide (MoS2) is a promising alternative to graphite anodes in battery materials. Therefore, it is critical to scrutinize their structural stability and charge storage capacity during battery operation. Herein, freestanding electrodes consisting of MoS2‐incorporated carbon nanotube aerogels are fabricated using a simple yet scalable hydrothermal method, as used in lithium‐ion batteries. The outer nitrogen‐doped graphitic carbon (NGr) layers support efficient charge transport, even under a substantial compressive environment, and improve the structural integrity, showing significant improvements in battery performance, such as a high rate capacity of 820 mAh g−1 at the current density of 5 A g−1 and 94% capacity retention after 170 cycles (1170 mAh g−1 at 1 A g−1 after 170 cycles), even in the absence of polymer binders and conductive additives. The resulting NGr/MoS2/single‐walled carbon nanotubes freestanding electrodes have great potential to increase the volumetric and gravimetric energy density of batteries.

Integrating 16S rRNA profiling and in-silico analysis for an epitope-based vaccine strategy against Achromobacter xylosoxidans infection

Achromobacter xylosoxidans is an aerobic, catalase-positive, non-pigment-forming, Gram-negative, and motile bacterium. It potentially causes a wide range of human infections in cystic fibrosis and non-cystic fibrosis patients. However, developing a safe preventive or therapeutic solution against A. xylosoxidans remains challenging. This study aimed to construct an epitope-based vaccine candidate using immunoinformatic techniques. A. xylosoxidans was isolated from an auto workshop in Lahore, and its identification was confirmed through 16S rRNA amplification and bioinformatic analysis. Two protein targets with GenBank accession numbers AKP90890.1 and AKP90355.1 were selected for the vaccine construct. Both proteins exhibited antigenicity, with scores of 0.757 and 0.580, respectively and the epitopes were selected based on the IC50 value using the ANN 4.0 and NN-align 2.3 epitope prediction method for MHC I and MHC II epitopes respectively and predicted epitopes were analyzed for antigenicity, allergenicity and pathogenicity. The vaccine construct demonstrated structural stability, thermostability, solubility, and hydrophilicity. The vaccine produced 250 B-memory cells per mm3 and approximately 16,000 IgM + IgG counts, indicating an effective immune response against A. xylosoxidans. Moreover, the vaccine candidate interacted stably with toll-like receptor 5, a pattern recognition receptor, with a confidence score of 0.98. These results highlight the potency of the designed vaccine candidate, suggesting its potential to withstand rigorous in vitro and in vivo clinical trials. This epitope-based vaccine could serve as the first preventive immunotherapy against A. xylosoxidans infections, addressing this bacterium’s health and financial burdens. The findings demonstrate the value of employing immunoinformatic tools in vaccine development, paving the way for more precise and tailored approaches to combating microbial threats.

A DNA tetrahedron-based nanosuit for efficient delivery of amifostine and multi-organ radioprotection

Unnecessary exposure to ionizing radiation (IR) often causes acute and chronic oxidative damages to normal cells and organs, leading to serious physiological and even life-threatening consequences. Amifostine (AMF) is a validated radioprotectant extensively applied in radiation and chemotherapy medicine, but the short half-life limits its bioavailability and clinical applications, remaining as a great challenge to be addressed. DNA-assembled nanostructures especially the tetrahedral framework nucleic acids (tFNAs) are promising nanocarriers with preeminent biosafety, low biotoxicity, and high transport efficiency. The tFNAs also have a relative long-term maintenance for structural stability and excellent endocytosis capacity. We therefore synthesized a tFNA-based delivery system of AMF for multi-organ radioprotection (tFNAs@AMF, also termed nanosuit). By establishing the mice models of accidental total body irradiation (TBI) and radiotherapy model of Lewis lung cancer, we demonstrated that the nanosuit could shield normal cells from IR-induced DNA damage by regulating the molecular biomarkers of anti-apoptosis and anti-oxidative stress. In the accidental total body irradiation (TBI) mice model, the nanosuit pretreated mice exhibited satisfactory alteration of superoxide dismutase (SOD) activities and malondialdehyde (MDA) contents, and functional recovery of hematopoietic system, reducing IR-induced pathological damages of multi-organ and safeguarding mice from lethal radiation. More importantly, the nanosuit showed a selective radioprotection of the normal organs without interferences of tumor control in the radiotherapy model of Lewis lung cancer. Based on a conveniently available DNA tetrahedron-based nanocarrier, this work presents a high-efficiency delivery system of AMF with the prolonged half-life and enhanced radioprotection for multi-organs. Such nanosuit pioneers a promising strategy with great clinical translation potential for radioactivity protection.

Photo-Healable Fabrics: Achieving Structural Control via Photochemical Solid-Liquid Transitions of Polystyrene/Azobenzene-Containing Polymer Blends.

While polymer fabrics are integral to a wide range of applications, their vulnerability to mechanical damage limits their sustainability and practicality. Addressing this challenge, our study introduces a versatile strategy to develop photohealable fabrics, utilizing a composite of polystyrene (PS) and an azobenzene-containing polymer (PAzo). This combination leverages the structural stability of PS to compensate for the mechanical weaknesses of PAzo, forming the fiber structures. Key to our approach is the reversible trans-cis photoisomerization of azobenzene groups within the PAzo under UV light exposure, enabling controlled morphological alterations in the PS/PAzo blend fibers. The transition of PAzo sections from a solid to a liquid state at a low glass transition temperature (Tg ∼ 13.7 °C) is followed by solidification under visible light, thus stabilizing the altered fiber structures. In this study, we explore various PS/PAzo blend ratios to optimize surface roughness and mechanical properties. Additionally, we demonstrate the capability of these fibers for photoinduced self-healing. When damaged fabrics are clamped and subjected to UV irradiation for 20 min and pressed for 24 h, the mobility of the cis-form PAzo sections facilitates healing while retaining the overall fabric structure. This innovative approach not only addresses the critical issue of durability in polymer fabrics but also offers a sustainable and practical solution, paving the way for its application in smart clothing and advanced fabric-based materials.

Can Microfluidics Improve Sperm Quality? A Prospective Functional Study

The same sperm selection techniques in assisted reproduction clinics have remained largely unchanged despite their weaknesses. Recently, microfluidic devices have emerged as a novel methodology that facilitates the sperm selection process with promising results. A prospective case-control study was conducted in two phases: 100 samples were used to compare the microfluidic device with Density Gradient, and another 100 samples were used to compare the device with the Swim-up. In the initial phase, a significant enhancement in progressive motility, total progressive motile sperm count, vitality, morphology, and sperm DNA fragmentation were obtained for the microfluidic group compared to Density Gradient. Nevertheless, no statistically significant differences were observed in sperm concentration and chromatin structure stability. In the subsequent phase, the microfluidic group exhibited significant increases in sperm concentration, total progressive motile sperm count, and vitality compared to Swim-up. However, non-significant differences were seen for progressive motility, morphology, DNA structure stability, and DNA fragmentation. Similar trends were observed when results were stratified into quartiles. In conclusion, in a comparison of microfluidics with standard techniques, an improvement in sperm quality parameters was observed for the microfluidic group. However, this improvement was not significant for all parameters.

Bacteriophage T4 as a Protein-Based, Adjuvant- and Needle-Free, Mucosal Pandemic Vaccine Design Platform.

The COVID-19 pandemic has transformed vaccinology. Rapid deployment of mRNA vaccines has saved countless lives. However, these platforms have inherent limitations including lack of durability of immune responses and mucosal immunity, high cost, and thermal instability. These and uncertainties about the nature of future pandemics underscore the need for exploring next-generation vaccine platforms. Here, we present a novel protein-based, bacteriophage T4 platform for rapid design of efficacious vaccines against bacterial and viral pathogens. Full-length antigens can be displayed at high density on a 120 × 86 nm phage capsid through nonessential capsid binding proteins Soc and Hoc. Such nanoparticles, without any adjuvant, induce robust humoral, cellular, and mucosal responses when administered intranasally and confer sterilizing immunity. Combined with structural stability and ease of manufacture, T4 phage provides an excellent needle-free, mucosal pandemic vaccine platform and allows equitable vaccine access to low- and middle-income communities across the globe.

Boosting potassium and sodium-ion storage performance by in-situ self-assembly of a Co-based π-d conjugated coordination polymer on graphene nanosheets

To obtain anode materials with good electrochemical performances in both potassium ion batteries (PIBs) and sodium-ion batteries (SIBs), a Co-based π-d conjugated coordination polymer (Co-HHTP) is in-situ assembled on graphene (G) nanosheets using a facile one-step solvothermal method. The resulting Co-HHTP/G composite shows improved electrochemical performances over pure Co-HHTP. After 300 cycles of using as an anode of PIBs/SIBs for the first time, the reversible specific capacity of the Co-HHTP/G composite is found to be 381/277 mAh g−1 at 100 mA g−1. After undergoing 500 cycles at 1000 mA g−1, the material's reversible specific capacities remain at 234/164 mAh g−1 for PIBs/SIBs. The improved performances of the Co-HHTP/G composite electrode are due to the incorporation of graphene. This incorporation not only reduces structural stacking and promotes active site utilization, but also increases electrical conductivity and structural stability. According to the ex-situ X-ray photoelectron spectrometer (XPS) spectra, the Co-HHTP/G's energy storage mechanism throughout the process of potassisation/depotassisation is found to be linked to the aromatic rings presented in the organic ligands.

Impact response characteristics and damage mechanism of continuous carbon-fiber-reinforced magnesium matrix composite materials

The continuous carbon-fiber-reinforced magnesium matrix composite (C_f/Mg) is a new type of composite material made of a magnesium alloy sheet and carbon-fiber-reinforced composite material with alternating layers. It has the advantages of high damage tolerance, light weight, and corrosion resistance, and has become the first choice of lightweight materials in aerospace, transportation, and other fields. Because impact-resistance serves as an important index for its structural design and performance stability, a continuous carbon-fiber-reinforced magnesium matrix composite with indirect bonding using a modified epoxy resin was designed in this study. Moreover, C_f/Mg was chosen to be the object of research through the selection of constituent materials such as magnesium alloys, carbon fibers, resins, and other properties, which matched the aim of realizing a lightweight material. With the help of hot-compression molding technology, dynamic impact mechanical behavior, and damage analysis technology, the structural design and preparation process optimization of epoxy resin carbon-fiber prepregs and magnesium alloy layer materials, as well as the dynamic impact mechanical response characteristics and damage evolution process under different impact energy conditions, were studied. Accordingly, through a combination of low-velocity impact experiments and numerical simulations, the effects of continuous multiple impacts at the same location with the same impact energy, as well as impacts with the same impact energy and different punch diameters, on the low-velocity impact damage behavior and dynamic impact response characteristics of C_f/Mg were investigated. The results of this study show that when the 5J impact is applied four times consecutively, the peak impact load gradually increases with the increasing number of impacts. Moreover, the peak impact loads of the second, third, and fourth impacts increase by 6.09%, 10.7%, and 14.5%, respectively, compared with the results of the first impact.

Physicochemical and Rheological Characterization of a Novel Manna Exudate from Alhagi pseudalhagi (Iranian Tarangabin)

Tarangabin manna (TM) is a resinous substance having a yellowish sticky character with a reasonably sweet taste. It is largely collected in Iran and Afghanistan. This study for the first time presents a comprehensive investigation of the techno-functional, rheological, and interfacial characteristics of water-soluble components for TM. The composition analysis revealed protein, moisture, fat, ash, and carbohydrate contents of 1.58, 2.98, 0.51, 2.04, and 92.90%, respectively. The effects of TM concentration on the physicochemical, structural, rheological, interfacial, emulsion, and foaming ability and stability were evaluated. X-ray diffraction analysis showed an amorphous structure for the purified sample and a crystalline structure for the raw sample. TM solutions exhibited Newtonian behavior, with the apparent viscosity decreasing as temperature increased, fitting well with the Arrhenius model. The TM solutions exhibited weak viscoelastic properties, primarily demonstrating a dominant viscous character. The surface tension and interfacial tension of the TM solution prepared at a concentration of 50% were measured at 45.23 mN/m and 7.74 mN/m, respectively. The contact angle of the dry thin layer of TM was determined to be 31.74°. Remarkably, the TM solution at a concentration of 50% exhibited the highest foaming ability (76.80%), foaming stability (91.92%), and emulsifying activity index (24.53%). The findings, coupled with TM appropriate foaming ability and stability, sweetness, and characteristic flavor, suggest that TM holds potential as a special food ingredient.

Metal bond strength regulation enables large-scale synthesis of intermetallic nanocrystals for practical fuel cells.

Structurally ordered L10-PtM (M = Fe, Co, Ni and so on) intermetallic nanocrystals, benefiting from the chemically ordered structure and higher stability, are one of the best electrocatalysts used for fuel cells. However, their practical development is greatly plagued by the challenge that the high-temperature (>600 °C) annealing treatment necessary for realizing the ordered structure usually leads to severe particle sintering, morphology change and low ordering degree, which makes it very difficult for the gram-scale preparation of desirable PtM intermetallic nanocrystals with high Pt content for practical fuel cell applications. Here we report a new concept involving the low-melting-point-metal (M' = Sn, Ga, In)-induced bond strength weakening strategy to reduce Ea and promote the ordering process of PtM (M = Ni, Co, Fe, Cu and Zn) alloy catalysts for a higher ordering degree. We demonstrate that the introduction of M' can reduce the ordering temperature to extremely low temperatures (≤450 °C) and thus enable the preparation of high-Pt-content (≥40 wt%) L10-Pt-M-M' intermetallic nanocrystals as well as ten-gram-scale production. X-ray spectroscopy studies, in situ electron microscopy and theoretical calculations reveal the fundamental mechanism of the Sn-facilitated ordering process at low temperatures, which involves weakened bond strength and consequently reduced Ea via Sn doping, the formation and fast diffusion of low-coordinated surface free atoms, and subsequent L10 nucleation. The developed L10-Ga-PtNi/C catalysts display outstanding performance in H2-air fuel cells under both light- and heavy-duty vehicle conditions. Under the latter condition, the 40% L10-Pt50Ni35Ga15/C catalyst delivers a high current density of 1.67 A cm-2 at 0.7 V and retains 80% of the current density after extended 90,000 cycles, which exceeds the United States Department of Energy performance metrics and represents among the best cathodic electrocatalysts for practical proton-exchange membrane fuel cells.

Synergistic Anti-Inflammatory Activity of Lipid-Free Apolipoprotein (apo) A-I and CIGB-258 in Acute-Phase Zebrafish via Stabilization of the apoA-I Structure to Enhance Anti-Glycation and Antioxidant Activities

CIGB-258, a 3 kDa peptide from heat shock protein 60, exhibits synergistic anti-inflammatory activity with apolipoprotein A-I (apoA-I) in reconstituted high-density lipoproteins (rHDLs) via stabilization of the rHDL structure. This study explored the interactions between CIGB-258 and apoA-I in the lipid-free state to assess their synergistic effects in the structural and functional enhancement of apoA-I and HDL. A co-treatment of lipid-free apoA-I and CIGB-258 inhibited the cupric ion-mediated oxidation of low-density lipoprotein (LDL) and a lowering of oxidized species in the dose-responsive manner of CIGB-258. The co-presence of CIGB-258 caused a blue shift in the wavelength of maximum fluorescence (WMF) of apoA-I with protection from proteolytic degradation. The addition of apoA-I:CIGB-258, with a molar ratio of 1:0.1, 1:0.5, and 1:1, to HDL2 and HDL3 remarkably enhanced the antioxidant ability against LDL oxidation up to two-fold higher than HDL alone. HDL-associated paraoxonase activities were elevated up to 28% by the co-addition of apoA-I and CIGB-258, which is linked to the suppression of Cu2+-mediated HDL oxidation with the slowest electromobility. Isothermal denaturation by a urea treatment showed that the co-presence of CIGB-258 attenuated the exposure of intrinsic tryptophan (Trp) and increased the mid-points of denaturation from 2.33 M for apoA-I alone to 2.57 M for an apoA-I:CIGB-258 mixture with a molar ratio of 1:0.5. The addition of CIGB-258 to apoA-I protected the carboxymethyllysine (CML)-facilitated glycation of apoA-I with the prevention of Trp exposure. A co-treatment of apoA-I and CIGB-258 synergistically safeguarded zebrafish embryos from acute death by CML-toxicity, suppressing oxidative stress and apoptosis. In adult zebrafish, the co-treatment of apoA-I+CIGB-258 exerted the highest anti-inflammatory activity with a higher recovery of swimming ability and survivability than apoA-I alone or CIGB-258 alone. A co-injection of apoA-I and CIGB-258 led to the lowest infiltration of neutrophils and interleukin (IL)-6 generation in hepatic tissue, with the lowest serum triglyceride, aspartate transaminase, and alanine transaminase levels in plasma. In conclusion, the co-presence of CIGB-258 ameliorated the beneficial functionalities of apoA-I, such as antioxidant and anti-glycation activities, by enhancing the structural stabilization and protection of apoA-I. The combination of apoA-I and CIGB-258 synergistically enforced the anti-inflammatory effect against CML toxicity in embryos and adult zebrafish.

Comprehensive calibration and laboratory validation of a Micro Electromechanical System sensor–based flexible inclinometer

Abstract Real-time monitoring of slopes, tunnels, and dams is important for ensuring the long-term stability and reliability of such structures. Despite the successes of current technologies in many applications, a gap still exists in certain areas such as precision in steep slopes and complex soil conditions. This study has designed a flexible inclinometer based on an array of Micro Electromechanical System (MEMS) sensors to enhance the accuracy and flexibility of existing monitoring techniques. The inclination angle of each flexible inclinometer measurement unit was measured to monitor the horizontal or vertical displacement of the target structural body. We used the Levenberg–Marquardt (LM) algorithm for optimizing the MEMS sensors based calibration and designed multiple experiments to test the accuracy of the proposed method. Experimental results show that the calibrated flexible inclinometer measurement unit has an inclination angle of less than 0.04° and the accuracy of the flexible inclinometer lies within ±0.4 mm in the horizontal attitude and 1.6 mm in the vertical attitude. Our research has developed a novel tool for geotechnical engineering monitoring that can aid in increasing the precision of real-time assessment and prediction of structural stability.

Family resilience and vulnerability of patients at diagnosis of lung cancer: A qualitative study.

To explore and analyse the adaptation process of patients and their families at the point of lung cancer diagnosis. Totally 23 operable lung cancer patients were included in this study. Colaizzi's method of phenomenology was employed for data analysis. This study found two different aspects of family adaptation at the diagnosis of lung cancer. For family resilience, three themes emerged: (1) Positive family belief systems (giving meaning to a cancer diagnosis and maintaining a positive/optimistic attitude), (2) Flexible family organizational patterns (maintaining the stability of family structure and function, adjusting the relationship between patients and family members and receiving external support and help) and (3) Good communication and problem-solving strategies (open communication on an equal basis, positive and open expression of emotions and collaborative problem-solving). For family vulnerability, three themes were as follows: (1) Negative family belief systems (negative attitudes and concealment and self-isolation due to stigma), (2) Rigid family organizational patterns (adaptation lost, conflicts between family support and patients' willingness and pressure upon social support) and (3) Unhealthy communication and problem-solving (poor communication, emotional asymmetry of family members and tendency to solve problems alone). The study highlights the existence of the family resilience and family vulnerability at the point of lung cancer diagnosis and provides patient's perspective for understanding family resilience in specific cultural contexts. The data were collected through face-to-face interviews. ChiCTR2300074801.

Schottky junction-mediated carrier separation in BiOBr/Ti3C2Tx van der Waals heterojunction photocatalyst for increased removal of Cr(VI) under visible-light

The photocatalytic removal of pollutants can integrate efficient solar energy utilization with wastewater treatment. Herein, we report a simple strategy to construct BiOBr/Ti3C2Tx composite photocatalysts consisting of self-assembled van der Waals (vdw) heterojunction structures containing Schottky junctions. The vdW interaction between BiOBr and Ti3C2Tx and the structural stability of the catalysts were validated by density functional theory (DFT) calculations and an ab initio molecular dynamic simulation (AIMD). Compared to BiOBr, the BiOBr/Ti3C2Tx composites exhibited an enhanced light absorption capability and photocurrent response, along with a lower carrier recombination rate and charge-transfer resistance. The BiOBr/Ti3C2Tx activity for the photoreduction of hexavalent chromium (Cr(VI)) under visible-light irradiation considerably surpassed that of the original BiOBr (53.9%). Using the BTC-0.8 catalyst (with a Ti3C2Tx: BiOBr mass ratio of 0.8%) optimal reduction efficiency (94.0%) for Cr(VI) with a reaction rate approximately 3.5 times that of pure BiOBr. The BTC-0.8 catalyst was viable over a wide pH range and maintained an 83.9% photoreduction rate after four cycling experiments. The exceptional photocatalytic ability of BiOBr/Ti3C2Tx was achieved because Ti3C2Tx served as an electron injection layer that separated photogenerated carriers. The Schottky junction constructed within the BiOBr/Ti3C2Tx vdW heterojunctions suppressed electron backflow, promoting carrier separation. The excellent photocatalytic performance and strong cyclic stability of BiOBr/Ti3C2Tx demonstrated the considerable application potential of this photocatalyst.

Thermal Stability Analysis of Formamidinium–Cesium‐Based Lead Halide Perovskite Solar Cells Fabricated under Air Ambient Conditions

The instability of perovskite solar cells (PSCs) remains a major bottleneck for their commercialization, with thermal instability posing a major concern, given the inevitable presence of heat in photovoltaic devices. Mixed‐cation/halide perovskites demonstrate enhanced stability and efficiency compared to single‐cation/halide perovskites. Identifying the optimal perovskite composition capable of withstanding high temperatures for longer durations is crucial for the development of thermally stable PSCs. This study provides valuable insights into the optimization of mixed‐cation/halide perovskites to enhance the thermal and structural stability of perovskite films. By systematically varying the Cs content in FA1−yCsyPb(I0.85Br0.15)3 (0 < y < 25)‐based perovskite, it is observed that controlling the Cs content allows precise modulation of crystal orientation in perovskite film with 10% Cs obtained as the optimal value. The perovskite film containing 10% Cs not only exhibits reduced microstrain but also demonstrates enhanced thermal stability during testing at 85 °C under controlled humidity. Furthermore, planar PSCs are fabricated using FA0.90Cs0.10Pb(I0.85Br0.15)3 as the absorber layer and TOP‐3 as the hole‐transporting material, achieving a promising power conversion efficiency (PCE) of 17.70%. Impressively, the unencapsulated devices retain 95% of their initial PCE after 1000 h of dark storage under ambient conditions.

Ultrahigh‐Ni Cathode with Superior Structure Stability Enabled by a Covalent Bonding Strategy

Ultrahigh‐nickel layered oxide cathodes are the most promising cathode materials for high‐energy lithium‐ion batteries. However, the rapid structural degradation during cycling charge‐discharge process limits its commercial application. Herein, we report a covalent pinning strategy to enhance structure stability of ultrahigh‐Ni cathode LiNi0.9Co0.06Mn0.04O2 (NCM90). Zr is gradient diffused into the lattice of NCM90 and forms Zr‐O bonds during the sintering process, which can effectively alleviate the lattice distortion like introducing pinning centers due to the stronger bond energy, enhancing its structure stability during charge‐discharge process. In the meanwhile, the Zr‐O on the surface of NCM90 powder forms LixZryOz coating layer due to the reaction with lithium residue, which prevents from the edge reconstruction and mitigates the occurrence of side reactions, as well as ensuring a fast Li+ diffusion pathway crossing the interface. As a result, the Zr‐O modified NCM90 (Zr‐NCM) achieves 88.8% remarkable capacity retention at 1 C after 200 cycles over 2.8‐4.3V, which is superior to the pristine NCM90 with 71.2% retention. This work demonstrates that the Zr‐O bonding can provide an effective structure pinning for the ultrahigh‐Ni cathode, which will largely guide the development of high‐performance lithium‐ion battery cathode materials.

Oleanolic acid improved intestinal immune function by activating and potentiating bile acids receptor signaling in E. coli-challenged piglets

BackgroundInfection with pathogenic bacteria during nonantibiotic breeding is one of the main causes of animal intestinal diseases. Oleanolic acid (OA) is a pentacyclic triterpene that is ubiquitous in plants. Our previous work demonstrated the protective effect of OA on intestinal health, but the underlying molecular mechanisms remain unclear. This study investigated whether dietary supplementation with OA can prevent diarrhea and intestinal immune dysregulation caused by enterotoxigenic Escherichia coli (ETEC) in piglets. The key molecular role of bile acid receptor signaling in this process has also been explored.ResultsOur results demonstrated that OA supplementation alleviated the disturbance of bile acid metabolism in ETEC-infected piglets (P < 0.05). OA supplementation stabilized the composition of the bile acid pool in piglets by regulating the enterohepatic circulation of bile acids and significantly increased the contents of UDCA and CDCA in the ileum and cecum (P < 0.05). This may also explain why OA can maintain the stability of the intestinal microbiota structure in ETEC-challenged piglets. In addition, as a natural ligand of bile acid receptors, OA can reduce the severity of intestinal inflammation and enhance the strength of intestinal epithelial cell antimicrobial programs through the bile acid receptors TGR5 and FXR (P < 0.05). Specifically, OA inhibited NF-κB-mediated intestinal inflammation by directly activating TGR5 and its downstream cAMP-PKA-CREB signaling pathway (P < 0.05). Furthermore, OA enhanced CDCA-mediated MEK-ERK signaling in intestinal epithelial cells by upregulating the expression of FXR (P < 0.05), thereby upregulating the expression of endogenous defense molecules in intestinal epithelial cells.ConclusionsIn conclusion, our findings suggest that OA-mediated regulation of bile acid metabolism plays an important role in the innate immune response, which provides a new diet-based intervention for intestinal diseases caused by pathogenic bacterial infections in piglets.Graphical

Enhanced polyacrylamide polymer hydrogels using nanomaterials for water shutoff: Morphology, thermal and rheological investigations at high temperatures and salinity

This study focuses on the synthesis, characterization, and performance evaluation of polyacrylamide (PAM)/polyethyleneimine (PEI) hydrogels enhanced with nanomaterials for potential application in conformance control in oil wells. The materials used include PAM with a molar mass of 25,000 Kg mol−1, PEI with an average weight molar mass of 25 Kg mol−1, and synthetic brine (ionic strength 0.6). Nanomaterials such as titanium dioxide (TiO2) nanoparticles, oxidized carbon nanotubes (CNT-ox), and graphene oxide (GO) were incorporated into the hydrogel matrix. A simple method was used for the incorporation of nanomaterials into the polymeric matrix, ensuring their good dispersion in the hydrogels formed. Characterization techniques including thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were employed to analyze the structure, morphology, and thermal stability of the hydrogels. Rheological measurements and gel strength evaluations were conducted to assess the performance of the hydrogels. Results indicate that the incorporation of nanomaterials enhanced the thermal stability, gel strength (Sydansk code), and resistance to syneresis of the hydrogels. Specifically, the addition of TiO2 nanoparticles exhibited the highest improvement in viscosity and thermal stability, attributed to strong interactions between TiO2 and PAM molecules. A notable decrease in syneresis percentages was observed with the inclusion of nanomaterials compared to the PAM reference sample, reaching 70.1 % for the hydrogel modified with GO. These findings suggest that nanomaterial-enhanced hydrogels hold promise for applications in conformance control in oil wells, offering improved stability and performance over extended periods of use.

Antimicrobial Peptide‐Modified Liquid Metal Nanomaterials for Enhanced Antibacterial Photothermal Therapy

The misuse of antibiotics has led to antibiotic‐resistant “superbugs,” prompting the exploration of alternative antibacterial strategies. This study focuses on the promising avenue of photothermal therapy (PTT). Despite numerous advantages, the clinical applicability of PTT as a sole sterilization strategy is hindered by the necessity for higher temperatures, potentially causing harm to healthy tissues. To overcome this challenge, this study introduces antimicrobial peptides (AMPs) to modify the surface of gallium‐based liquid metal (LM) nano‐antimicrobial agents, thereby enhancing their photothermal antibacterial effects within a lower temperature range. First, a novel LM composite nanomaterial, LM@AMP nanoparticles, is synthesized through a sonication process involving 1,2‐distearoyl‐sn‐glycero‐3‐phosphoethanolamine‐N‐[carboxy(polyethylene glycol)], AMP, and LM in an aqueous solution. Herein, AMPs not only contribute to the structural stability of LM nanoparticles but also enhance their selective interaction with bacterial cell membranes. Then, a thorough characterization of LM@AMP nanoparticles is performed, encompassing analyses through electron microscopy, determination of particle size, and assessment of zeta potential. Moreover, the exceptional photothermal properties exhibited by these nanoparticles are validated. Finally, this investigation demonstrates that LM@AMP nanoparticles selectively target bacterial cell membranes, showcasing efficient bactericidal effects (near 100%) at relatively low temperatures under near‐infrared irradiation.

Study of the Long-Term High-Temperature Structural Stability of RuAl Electrodes for Microelectronic Devices

The high-temperature stability of RuAl-based electrodes for application in microelectronic devices is analyzed for long-term duration. The electrodes are prepared on Ca3TaGa3Si2O14 (CTGS) substrates using SiO2 and Al-N-O cover and barrier layers as oxidation protection. The samples are annealed at 600, 700, or 800 °C in air for 192 h. Minor degradation is observed after thermal loading at 700 °C. The annealing at 800 °C for 192 h leads to a partial oxidation of the Al in the extended contact pad and to a complete oxidation of the Al within the structured interconnect electrodes. The different degradation of the interconnect electrodes and the contact pads is caused by their different lateral dimensions. In summary, long-term high-temperature stability is demonstrated up to at least 700 °C in air. Less oxidizing atmospheres should allow the application at higher temperatures and for a significantly longer duration.