Structure-property Relationship Study Research Articles

Preparation and Structure–Property Relationship Study of Piezoelectric–Conductive Composite Polymer Nanofiber Materials for Bone Tissue Engineering

This study aimed to develop Janus-, cross-network-, and coaxial-structured piezoelectric–conductive polymer nanofibers through electrospinning to mimic the piezoelectricity of bone and facilitate the conduction of electrical signals in bone tissue repair. These nanofibers were constructed using the piezoelectric polymer polyvinylidene fluoride, and the conductive fillers reduced graphene oxide and polypyrrole. The influence of structural features on the electroactivity of the fibers was also explored. The morphology and components of the various structural samples were characterized using SEM, TEM, and FTIR. The electroactivity of the materials was assessed with a quasi-static d33 meter and the four-probe method. The results revealed that the piezoelectric–conductive phases were successfully integrated. The Janus-structured nanofibers demonstrated the best electroactivity, with a piezoelectric constant d33 of 24.5 pC/N and conductivity of 6.78 × 10−2 S/m. The tensile tests and MIP measurements showed that all samples had porosity levels exceeding 70%. The tensile strength of the Janus and cross-network structures exceeded that of the periosteum (3–4 MPa), with average pore sizes of 1194.36 and 2264.46 nm, respectively. These properties indicated good mechanical performance, allowing material support while preventing fibroblast invasion. The CCK-8 and ALP tests indicated that the Janus-structured samples were biocompatible and significantly promoted the proliferation of MC3T3-E1 cells.

Preparation and Structure-Property Relationship Study of Piezoelectric-Conductive Composite Polymer Nanofiber Materials for Bone Tissue Engineering.

This study aimed to develop Janus-, cross-network-, and coaxial-structured piezoelectric-conductive polymer nanofibers through electrospinning to mimic the piezoelectricity of bone and facilitate the conduction of electrical signals in bone tissue repair. These nanofibers were constructed using the piezoelectric polymer polyvinylidene fluoride, and the conductive fillers reduced graphene oxide and polypyrrole. The influence of structural features on the electroactivity of the fibers was also explored. The morphology and components of the various structural samples were characterized using SEM, TEM, and FTIR. The electroactivity of the materials was assessed with a quasi-static d33 meter and the four-probe method. The results revealed that the piezoelectric-conductive phases were successfully integrated. The Janus-structured nanofibers demonstrated the best electroactivity, with a piezoelectric constant d33 of 24.5 pC/N and conductivity of 6.78 × 10-2 S/m. The tensile tests and MIP measurements showed that all samples had porosity levels exceeding 70%. The tensile strength of the Janus and cross-network structures exceeded that of the periosteum (3-4 MPa), with average pore sizes of 1194.36 and 2264.46 nm, respectively. These properties indicated good mechanical performance, allowing material support while preventing fibroblast invasion. The CCK-8 and ALP tests indicated that the Janus-structured samples were biocompatible and significantly promoted the proliferation of MC3T3-E1 cells.

A hybrid evaluation of the intestinal absorption performance of compounds from molecular structure.

Intestinal absorption of compounds is significant in drug research and development. To evaluate this efficiently, a method combining mathematical modeling and molecular simulation was proposed, from the perspective of molecular structure. Based on the quantitative structure-property relationship study, the model between molecular structure and their apparent permeability coefficients was successfully constructed and verified, predicting intestinal absorption of drugs and interpreting decisive structural factors, such as AlogP98, Hydrogen bond donor and Ellipsoidal volume. The molecules with strong lipophilicity, less hydrogen bond donors and receptors, and small molecular volume are more easily absorbed. Then, the molecular dynamics simulation and molecular docking were utilized to study the mechanism of differences in intestinal absorption of drugs and investigate the role of molecular structure. Results indicated that molecules with strong lipophilicity and small volume interacted with the membrane at a lower energy and were easier to penetrate the membrane. Likewise, they had weaker interaction with P-glycoprotein and were easier to escape from it and harder to export from the body. More in, less out, is the main reason these molecules absorb well.

Applications of magnesium iodide structure via modified-polynomials

A relatively recent approach in molecular graph theory for analyzing chemical networks and structures is called a modified polynomial. It emphasizes the characteristics of molecules through the use of a polynomial-based procedure and presents numerical descriptors in algebraic form. The Quantitative Structure-Property Relationship study makes use of Modified Polynomials (M-Polynomials) as a mathematical tool. M-Polynomials used to create connections between a material’s various properties and its structural characteristics. In this study, we calculated several modified polynomials and gave a polynomial description of the magnesium iodide structure. Particularly, we computed first, second and modified Zagreb indices based M-polynomials. Randić index, and inverse Randić indices based M-polynomials are also computed in this work.

On topological indices and QSPR analysis of some drugs used for treating Coronavirus patients

A topological index is a real number obtained from the molecular graph structure. It can predict the physicochemical and biological properties of many anticoronavirus drugs. In this article, the topological index of some drugs for the treatment of coronavirus was computed using the Wiener-Hosoya eigenvalues of the molecular structure of hydroxychloroquine, chloroquine, camostat, nafamostat, remdesivir, and lopinavir compounds, and the Quantitative Structure Property Relationship (QSPR) study of some properties: Boiling point, Molar weight, Flash point and Enthalpy were investigated. It was observed that the regression model value r is more than 0.6 and p value shows less than 0.05.

Retrospective Analysis of Structure-Property Relationship of Emergent Metallo-Supramolecular Polymer Networks.

Metallo-supramolecular polymer networks (MSPNs) are fabricated from the crosslinking of polymers by discrete supramolecular coordination complexes. Due to the availability of various coordination complexes, e.g., 2D macrocycles and 3D nanocages, the MSPNs have been recently developed with broadly tuned visco-elasticity and enriched functions inherited from the coordination complexes. The coordination complexes possess enriched topologies and unique structural relaxation dynamics, rendering them the capability to break the traditional tradeoffs of polymer systems for the design of materials with enhanced mechanical performance. The structure-property relationship studies are critical for the material-by-design of MSPNs, while the spatiotemporal investigations are desired for the exploration of dynamics information. The work summarizes recent studies on the unique ligand-exchange kinetics and the multi-level structural relaxation dynamics of MSPNs. The MSPNs' mechanical properties can be quantitatively correlated with the dynamics for understanding the structure-property relationship. This concept will not only serve to attract more researchers to engage in the study of the structure-activity relationship of MSPNs but also inspire innovative research findings pertaining to the application of MSPNs.

Holistic Assessment of NIR-Emitting Nd3+-Activated Phosphate Glasses: A Structure–Property Relationship Study

Holistic Assessment of NIR-Emitting Nd³⁺-Activated Phosphate Glasses: A Structure–Property Relationship Study

Computation of Structural Descriptors of Pyrene Cored Dendrimers through Quotient Graph Approach and Its Graph Entropy Measures

Dendrimers are highly defined hyperbranched artificial macromolecules, synthesised by convergent or divergent approach with specific applications in various fields. Dendrimers can be represented as graph models, from which a quantitative description can be drawn in relation with their structural properties. The distance-based and the degree-based descriptors have great importance and huge applications in structural chemistry. These indices together with entropy measures are found to be more effective and have found application in scientific fields. The idea of graph entropy is to characterise the complexity of graphs. The use of these graph invariants in quantitative structure property relationship and quantitative structure activity relationship studies has become of major interest in recent years. In this paper, the distance-based molecular descriptors of pyrene cored dendrimers are studied applying the technique of converting original graph into quotient graphs using Θ∗-classes. It is to be noted that, since the pyrene cored dendrimer, Gn is not a partial cube, usual cut method is not applicable. Further, various degree-based descriptors and their corresponding graph entropies of the pyrene cored dendrimers are also studied. Based on the obtained results, a comparative analysis as well as a regression analysis was carried out.

Multivariate Approaches in Quantitative Structure-Property Relationships Study for the Photostability Assessment of 1,4-Dihydropyridine Derivatives.

1,4-dihydropyridines (1,4-DHPs) are widely recognized as highly effective L-type calcium channel blockers with significant therapeutic benefits in the treatment of cardiovascular disorders. 1,4-DHPs can also target T-type calcium channels, making them promising drug candidates for neurological conditions. When exposed to light, all 1,4-DHPs tend to easily degrade, leading to an oxidation product derived from the aromatization of the dihydropyridine ring. Herein, the elaboration of a quantitative structure-property relationships (QSPR) model was carried out by correlating the light sensitivity of structurally different 1,4-DHPs with theoretical molecular descriptors. Photodegradation experiments were performed by exposing the drugs to a Xenon lamp following the ICH rules. The degradation was monitored by spectrophotometry, and experimental data were elaborated by Multivariate Curve Resolution (MCR) methodologies to assess the kinetic rates. The results were confirmed by the HPLC-DAD method. PaDEL-Descriptor software was used to calculate molecular descriptors and fingerprints related to the chemical structures. Seventeen of the 1875 molecular descriptors were selected and correlated to the photodegradation rate by means of the Ordinary Least Squares (OLS) algorithm. The chemometric model is useful to predict the photosensitivity of other 1,4-DHP derivatives with a very low relative error percentage of 5.03% and represents an effective tool to design new analogs characterized by higher photostability.

Grafting Electron-Accepting Fragments on [4]cyclo-2,7-carbazole Scaffold: Tuning the Structural and Electronic Properties of Nanohoops.

Since the first applications of nanohoops in organic electronics appear promising, the time has come to go deeper into their rational design in order to reach high-efficiency materials. To do so, systematic studies dealing with the incorporation of electron-rich and/or electron-poor functional units on nanohoops have to be performed. Herein, the synthesis, the electrochemical, photophysical, thermal, and structural properties of two [4]cyclo-2,7-carbazoles, [4]C-Py-Cbz, and [4]C-Pm-Cbz, possessing electron-withdrawing units on their nitrogen atoms (pyridine or pyrimidine) are reported. The synthesis of these nanohoops is first optimized and a high yield above 50% is reached. Through a structure-properties relationship study, it is shown that the substituent has a significant impact on some physicochemical properties (eg HOMO/LUMO levels) while others are kept unchanged (eg fluorescence). Incorporation in electronic devices shows that the most electrically efficient Organic Field-Effect transistors are obtained with [4]C-Py-Cbz although this compound does not present the best-organized semiconductor layer. These experimental data are finally confronted with the electronic couplings between the nanohoops determined at the DFT level and have highlighted the origin in the difference of charge transport properties. [4]C-Py-Cbz has the advantage of a more 2D-like transport character than [4]C-Pm-Cbz, which alleviates the impact of defects and structural organization.

Topological analysis of tetracyanobenzene metal–organic framework

Metal–organic frameworks (MOFs) are vital in modern material science, offering unique properties for gas storage, catalysis, and drug delivery due to their highly porous and customizable structures. Chemical graph theory emerges as a critical tool, providing a mathematical model to represent the molecular structure of these frameworks. Topological indices/molecular descriptors are mathematical formulations applied to molecular models, enabling the analysis of physicochemical properties and circumventing costly lab experiments. These descriptors are crucial for quantitative structure-property and structure-activity relationship studies in mathematical chemistry. In this paper, we study the different molecular descriptors of tetracyanobenzene metal–organic framework. We also give numerical comparison of computed molecular descriptors.

Boosting Circularly Polarized Luminescence from Alkyl-Locked Axial Chirality Scaffold by Restriction of Molecular Motions.

Boosting the circularly polarized luminescence of small organic molecules has been a stubborn challenge because of weak structure rigidity and dynamic molecular motions. To investigate and eliminate these factors, here, we carried out the structure-property relationship studies on a newly-developed axial chiral scaffold of bidibenzo[b,d]furan. The molecular rigidity was finely tuned by gradually reducing the alkyl-chain length. The environmental factors were considered in solution, crystal, and polymer matrix at different temperatures. As a result, a significant amplification of the dissymmetry factor glum from 10-4 to 10-1 was achieved, corresponding to the situation from (R)-4C in solution to (R)-1C in polymer film at room temperature. A synergistic strategy of increasing the intramolecular rigidity and enhancing the intermolecular interaction to restrict the molecular motions was thus proposed to improve circularly polarized luminescence. The though-out demonstrated relationship will be of great importance for the development of high-performance small organic chiroptical systems in the future.

Computation of Wiener and Wiener Polarity Indices of a Class of Nanostar Dendrimer Using Vertex Weighted Graphs

Nanostar dendrimers are tree-like nanostructures with a well-defined, symmetrical architecture. They are built in a step-by-step, controlled synthesis process, with each layer or generation building on the previous one. Dendrimers are made up of a central core, a series of repeating units or branches, and a surface group shell. A weighted graph is a type of graph in which vertices or edges are assigned weights that represent cost, distance, and a variety of other relative measuring units. The weighted graphs have many applications and properties in a mathematical context. The topological indices are numerical values that represent the symmetry of a molecular structure. They have rich applications in theoretical chemistry. Various topological indices can be used to investigate a wide range of properties of chemical compounds with a molecular structure. They are very important in mathematical chemistry, especially in quantitative structure-activity relationship (QSAR) and quantitative structure-property relationship (QSPR) studies. In this paper, we examine the topological properties of the molecular graphs of nanostar dendrimers. For this purpose, the topological indices, namely, the Wiener index and the Wiener polarity index are computed for a class of nanostar dendrimers.

Amphiphilic–zwitterionic block polymers

Amphiphilic zwitterionic (AZ) block copolymers are readily prepared using post-polymerization modification, which offers exciting prospects for structure property relationship studies.

Quantitative structure–property relationship study of constrained geometry catalysts for olefin polymerization

The quantitative structure–property relationship (QSPR) of constrained geometry catalysts (CGCs) has been analyzed by combining density functional theory (DFT) and multivariate linear regression (MLR).

Destructive quantum interference in meta-oligo(phenyleneethynylene) molecular wires with gold-graphene heterojunctions.

Quantum interference (QI) is well recognised as a significant contributing factor to the magnitude of molecular conductance values in both single-molecule and large area junctions. Numerous structure-property relationship studies have shown that para-connected oligo(phenyleneethynylene) (OPE) based molecular wires exemplify the impact of constructive quantum interference (CQI), whilst destructive quantum interference (DQI) effects are responsible for the orders of magnitude lower conductance of analogous meta-contacted OPE derivatives, despite the somewhat shorter effective tunnelling distance. Since molecular conductance is related to the value of the transmission function, evaluated at the electrode Fermi energy, T(EF), which in turn is influenced by the presence and relative energy of (anti)resonances, it follows that the relative single-molecule conductance of para- and meta-contacted OPE-type molecules is tuned both by the anchor group and the nature of the electrode materials used in the construction of molecular junctions (gold|molecule|gold vs. gold|molecule|graphene). It is shown here that whilst amine-contacted junctions show little influence of the electrode material on molecular conductance due to the similar electrode-molecule coupling through this anchor group to both types of electrodes, the weaker coupling between thiomethyl and ethynyl anchors and the graphene substrate electrode results in a relative enhancement of the DQI effect. This work highlights an additional parameter space to explore QI effects and establishes a new working model based on the electrode materials and anchor groups in modulating QI effects beyond the chemical structure of the molecular backbone.

Study of drug structures using topological descriptors and multi‐criteria decision making

AbstractIt has been observed that there is a strong correlation between topological descriptors of chemical structures and their physical properties in a number of tests every year. There are several of these characteristics, including molecular mass, density, melting and boiling points, flash points, and others. Topological indices are numerical numbers associated with the molecular graph and are used in quantitative structure property relationship studies to predict their physical and chemical properties. In this work, we have calculated the reverse degree based topological descriptors of five molecular structures namely, hyaluronic acid–paclitaxel conjugates (), anticancer drug (), polyomino chain of ‐cycle (), triangular benzenoid (), and circumcoronene benzenoid series (). The values of topological indices are used in entropy method to calculate the weights. Then, using multiple criteria decision‐making techniques like COPRAS and PROMETHEE, we rank these molecular structures.

Rational Design, Synthesis, and Structure-Property Relationship Studies of a Library of Thermoplastic Polyurethane Films as an Effective and Scalable Encapsulation Material for Perovskite Solar Cells.

Hybrid organic-inorganic metal halide perovskite solar cell (PSC) technology is experiencing rapid growth due to its simple solution chemistry, high power conversion efficiency (PCE), and potential for low-cost mass production. Nevertheless, the primary obstacle preventing the upscaling and widespread outdoor deployment of PSC technology is the poor long-term device stability, which stems from the inherent instability of perovskite materials in the presence of oxygen and moisture. To address this issue, in this work, we have synthesized a series of thermoplastic polyurethanes (TPUs) through a rational design by utilizing polyols having different molecular weights and diverse isocyanates (aromatic and aliphatic). Thorough characterization of these TPUs (ASTM and ISO standards) along with structure-property relationship studies were carried out for the first time and were then used as the encapsulation material for PSCs. The prepared TPUs were robust and adhered well with the glass substrate, and the use of low temperature during the encapsulation process avoided the degradation of the perovskite absorber and other organic layers in the device stack. The encapsulated devices retained more than 93% of their initial power conversion efficiency (PCE) for over 1000 h after exposure to harsh environmental conditions such as high relative humidity (80 ± 5% RH). Furthermore, the encapsulated perovskite absorbers showed remarkable stability when they were soaked in water. This article demonstrates the potential of TPU as a suitable and easily scalable encapsulant for PSCs and pave the way for extending the lifetime and commercialization of PSCs.

J-Aggregation Strategy toward Potentiated NIR-II Fluorescence Bioimaging of Molecular Fluorophores.

Molecular fluorophores emitting in the second near-infrared (NIR-II, 1000-1700 nm) window with strong optical harvesting and high quantum yields hold great potential for in vivo deep-tissue bioimaging and high-resolution biosensing. Recently, J-aggregates are harnessed to engineer long-wavelength NIR-II emitters and show unique superiority in tumor detection, vessel mapping, surgical navigation, and phototheranostics due to their bathochromic-shifted optical bands in the required slip-stacked arrangement aggregation state. However, despite the preliminary progress of NIR-II J-aggregates and theoretical study of structure-property relationships, further paradigms of NIR-II J-aggregates remain scarce due to the lack of study on aggregated fluorophores with slip-stacked fashion. In this effort, how to utilize the specific molecular structure to form slip-stacked packing motifs with J-type aggregated exciton coupling is emphatically elucidated. First, several molecular regulating strategies to achieve NIR-II J-aggregates containing intermolecular interactions and external conditions are positively summarized and deeply analyzed. Then, the recent reports on J-aggregates for NIR-II bioimaging and theranostics are systematically summarized to provide a clear reference and direction for promoting the development of NIR-II organic fluorophores. Eventually, the prospective efforts on ameliorating and promoting NIR-II J-aggregates to further clinical practices are outlined.

The eccentric harmonic index of trees

Topological indices play an important role in mathematical chemistry, particularly in studies of quantitative structure property and quantitative structure activity relationships. The eccentric harmonic index of G is defined as where uv is an edge of G, e(u) is the eccentricity of the vertex u in G. In this paper, we will determine the maximum and minmum eccentric harmonic index of trees in terms of graph parameters such as pendant number and matching number, and characterize corresponding extremal graphs.